In order to compute whether objects reachable from a set of tips are all
connected, we do a revision walk with these tips as positive references
and `--not --all`. `--not --all` will cause the revision walk to load
all preexisting references as uninteresting, which can be very expensive
in repositories with many references.
Benchmarking the git-rev-list(1) command highlights that by far the most
expensive single phase is initial sorting of the input revisions: after
all references have been loaded, we first sort commits by author date.
In a real-world repository with about 2.2 million references, it makes
up about 40% of the total runtime of git-rev-list(1).
Ultimately, the connectivity check shouldn't really bother about the
order of input revisions at all. We only care whether we can actually
walk all objects until we hit the cut-off point. So sorting the input is
a complete waste of time.
Introduce a new "--unsorted-input" flag to git-rev-list(1) which will
cause it to not sort the commits and adjust the connectivity check to
always pass the flag. This results in the following speedups, executed
in a clone of gitlab-org/gitlab [1]:
Benchmark #1: git rev-list --objects --quiet --not --all --not $(cat newrev)
Time (mean ± σ): 7.639 s ± 0.065 s [User: 7.304 s, System: 0.335 s]
Range (min … max): 7.543 s … 7.742 s 10 runs
Benchmark #2: git rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 4.995 s ± 0.044 s [User: 4.657 s, System: 0.337 s]
Range (min … max): 4.909 s … 5.048 s 10 runs
Summary
'git rev-list --unsorted-input --objects --quiet --not --all --not $(cat newrev)' ran
1.53 ± 0.02 times faster than 'git rev-list --objects --quiet --not --all --not $newrev'
[1]: https://gitlab.com/gitlab-org/gitlab.git. Note that not all refs
are visible to clients.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/merge: avoid -Wformat-extra-args from ancient Xcode
d540b70c85 (merge: cleanup messages like commit, 2019-04-17) adds
a way to change part of the helper text using a single call to
strbuf_add_commented_addf but with two formats with varying number
of parameters.
this trigger a warning in old versions of Xcode (ex 8.0), so use
instead two independent calls with a matching number of parameters
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduces a KHASH_INIT invocation with a trailing ';', which while
commonly expected will trigger warnings with pedantic on both
clang[-Wextra-semi] and gcc[-Wpedantic], because that macro has already
a semicolon and is meant to be invoked without one.
while fixing the macro would be a worthy solution (specially considering
this is a common recurring problem), remove the extra ';' for now to
minimize churn.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 6 Aug 2021 20:35:37 +0000 (13:35 -0700)]
build: catch clang that identifies itself as "$VENDOR clang"
The case statement in detect-compiler notices 'clang', 'FreeBSD
clang' and 'Apple clang', but there are other platforms that follow
the '$VENDOR clang' pattern (e.g. Debian).
Jeff King [Fri, 6 Aug 2021 19:20:22 +0000 (15:20 -0400)]
build: clang version may not be followed by extra words
The get_family and get_version helpers of detect-compiler assume
that the line to identify the version from the compilers have a
token "version", followed by the version number, followed by some
other string, e.g.
$ CC=gcc get_version_line
gcc version 10.2.1 20210110 (Debian 10.2.1-6)
But that is not necessarily true, e.g.
$ CC=clang get_version_line
Debian clang version 11.0.1-2
Tweak the script not to require extra string after the version.
build: update detect-compiler for newer Xcode version
1da1580e4c (Makefile: detect compiler and enable more warnings in
DEVELOPER=1, 2018-04-14) uses the output of the compiler banner to
detect the compiler family.
Apple had since changed the wording used to refer to its compiler
as clang instead of LLVM as shown by:
$ cc --version
Apple clang version 12.0.5 (clang-1205.0.22.9)
Target: x86_64-apple-darwin20.6.0
Thread model: posix
InstalledDir: /Library/Developer/CommandLineTools/usr/bin
so update the script to match, and allow DEVELOPER=1 to work as
expected again in macOS.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c49a177bec (test-lib.sh: set COLUMNS=80 for --verbose
repeatability, 2021-06-29) multiple tests have been failing when using
bash 5 because checkwinsize is enabled by default, therefore COLUMNS is
reset using TIOCGWINSZ even for non-interactive shells.
It's debatable whether or not bash should even be doing that, but for
now we can avoid this undesirable behavior by disabling this option.
Reported-by: Fabian Stelzer <fabian.stelzer@campoint.net> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: with SZEDER Gábor's suggestion to do this before setting COLUMNS] Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 4 Aug 2021 05:38:02 +0000 (05:38 +0000)]
Update docs for change of default merge backend
Make it clear that `ort` is the default merge strategy now rather than
`recursive`, including moving `ort` to the front of the list of merge
strategies.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 4 Aug 2021 05:38:01 +0000 (05:38 +0000)]
Change default merge backend from recursive to ort
There are a few reasons to switch the default:
* Correctness
* Extensibility
* Performance
I'll provide some summaries about each.
=== Correctness ===
The original impetus for a new merge backend was to fix issues that were
difficult to fix within recursive's design. The success with this goal
is perhaps most easily demonstrated by running the following:
* Seven sets of submodule tests (10 total tests) that fail with
recursive but succeed with ort
* 22 other tests that fail with recursive, but succeed with ort
* 0 tests that pass with recursive, but fail with ort
=== Extensibility ===
Being able to perform merges without touching the working tree or index
makes it possible to create new features that were difficult with the
old backend:
* Merging, cherry-picking, rebasing, reverting in bare repositories...
or just on branches that aren't checked out.
* `git diff AUTO_MERGE` -- ability to see what changes the user has
made to resolve conflicts so far (see commit 5291828df8 ("merge-ort:
write $GIT_DIR/AUTO_MERGE whenever we hit a conflict", 2021-03-20)
* A --remerge-diff option for log/show, used to show diffs for merges
that display the difference between what an automatic merge would
have created and what was recorded in the merge. (This option will
often result in an empty diff because many merges are clean, but for
the non-clean ones it will show how conflicts were fixed including
the removal of conflict markers, and also show additional changes
made outside of conflict regions to e.g. fix semantic conflicts.)
* A --remerge-diff-only option for log/show, similar to --remerge-diff
but also showing how cherry-picks or reverts differed from what an
automatic cherry-pick or revert would provide.
The last three have been implemented already (though only one has been
submitted upstream so far; the others were waiting for performance work
to complete), and I still plan to implement the first one.
=== Performance ===
I'll quote from the summary of my final optimization for merge-ort
(while fixing the testcase name from 'no-renames' to 'few-renames'):
Timings
Infinite
merge- merge- Parallelism
recursive recursive of rename merge-ort
v2.30.0 current detection current
---------- --------- ----------- ---------
few-renames: 18.912 s 18.030 s 11.699 s 198.3 ms
mega-renames: 5964.031 s 361.281 s 203.886 s 661.8 ms
just-one-mega: 149.583 s 11.009 s 7.553 s 264.6 ms
The `--no-walk` flag supports two modes: either it sorts the revisions
given as input input or it doesn't. This is reflected in a single
`no_walk` flag, which reflects one of the three states "walk", "don't
walk but without sorting" and "don't walk but with sorting".
Split up the flag into two separate bits, one indicating whether we
should walk or not and one indicating whether the input should be sorted
or not. This will allow us to more easily introduce a new flag
`--unsorted-input`, which only impacts the sorting bit.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: normalize clobbering & xargs for tags targets
Since the "tags", "TAGS" and "cscope.out" targets rely on piping into
xargs with an "echo <list> | xargs" pattern, we need to make sure
we're in an append mode.
Unlike my recent change to make use of ".DELETE_ON_ERROR" in 7b76d6bf221 (Makefile: add and use the ".DELETE_ON_ERROR" flag,
2021-06-29), we really do need the "rm $@+" at the beginning (note,
not "rm $@").
This is because the xargs command may decide to invoke the program
multiple times. We need to make sure we've got a union of its results
at the end.
For "ctags" and "etags" we used the "-a" flag for this, for cscope
that behavior is the default. Its "-u" flag disables its equivalent of
an implicit "-a" flag.
Let's also consistently use the $@ and $@+ names instead of needlessly
hardcoding or referring to more verbose names in the "tags" and "TAGS"
rules.
These targets could perhaps be improved in the future by factoring
this "echo <list> | xargs" pattern so that we make intermediate tags
files for each source file, and then assemble them into one "tags"
file at the end.
The etags manual page suggests that doing that (or perhaps just
--update) might be counter-productive, in any case, the tag building
is fast enough for me, so I'm leaving that for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: remove "cscope.out", not "cscope*" in cscope.out target
Before we generate a "cscope.out" file, remove that file explicitly,
and not everything matching "cscope*". This doesn't change any
behavior of the Makefile in practice, but makes this rule less
confusing, and consistent with other similar rules.
The cscope target was added in a2a9150bf06 (makefile: Add a cscope
target, 2007-10-06). It has always referred to cscope* instead of to
cscope.out in .gitignore and the "clean" target, even though we only
ever generated a cscope.out file.
This was seemingly done to aid use-cases where someone invoked cscope
with the "-q" flag, which would make it create a "cscope.in.out" and
"cscope.po.out" files in addition to "cscope.out".
But us removing those files we never generated is confusing, so let's
only remove the file we need to, furthermore let's use the "-f" flag
to explicitly name the cscope.out file, even though it's the default
if not "-f" argument is supplied.
It is somewhat inconsistent to change from the glob here but not in
the "clean" rule and .gitignore, an earlier version of this change
updated those as well, but see [1][2] for why they were kept.
The --advertise-refs documentation in git-upload-pack added in 9812f2136b3 (upload-pack.c: use parse-options API, 2016-05-31) hasn't
been entirely true ever since v2 support was implemented in e52449b6722 (connect: request remote refs using v2, 2018-03-15). Under
v2 we don't advertise the refs at all, but rather dump the
capabilities header.
This option has always been an obscure internal implementation detail,
it wasn't even documented for git-receive-pack. Since it has exactly
one user let's rename it to --http-backend-info-refs, which is more
accurate and points the reader in the right direction. Let's also
cross-link this from the protocol v1 and v2 documentation.
I'm retaining a hidden --advertise-refs alias in case there's any
external users of this, and making both options hidden to the bash
completion (as with most other internal-only options).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
serve.[ch]: remove "serve_options", split up --advertise-refs code
The "advertise capabilities" mode of serve.c added in ed10cb952d3 (serve: introduce git-serve, 2018-03-15) is only used by
the http-backend.c to call {upload,receive}-pack with the
--advertise-refs parameter. See 42526b478e3 (Add stateless RPC options
to upload-pack, receive-pack, 2009-10-30).
Let's just make cmd_upload_pack() take the two (v2) or three (v2)
parameters the the v2/v1 servicing functions need directly, and pass
those in via the function signature. The logic of whether daemon mode
is implied by the timeout belongs in the v1 function (only used
there).
Once we split up the "advertise v2 refs" from "serve v2 request" it
becomes clear that v2 never cared about those in combination. The only
time it mattered was for v1 to emit its ref advertisement, in that
case we wanted to emit the smart-http-only "no-done" capability.
Since we only do that in the --advertise-refs codepath let's just have
it set "do_done" itself in v1's upload_pack() just before send_ref(),
at that point --advertise-refs and --stateless-rpc in combination are
redundant (the only user is get_info_refs() in http-backend.c), so we
can just pass in --advertise-refs only.
Since we need to touch all the serve() and advertise_capabilities()
codepaths let's rename them to less clever and obvious names, it's
been suggested numerous times, the latest of which is [1]'s suggestion
for protocol_v2_serve_loop(). Let's go with that.
The --advertise-refs option had no explicit tests of its own, only
other http tests that would fail at a distance if it it was
broken. Let's test its behavior explicitly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
serve.c: move version line to advertise_capabilities()
The advertise_capabilities() is only called from serve() and we always
emit this version line before it. In a subsequent commit I'll make
builtin/upload-pack.c sometimes call advertise_capabilities()
directly, so it'll make sense to have this line emitted by
advertise_capabilities(), not serve() itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
serve: move transfer.advertiseSID check into session_id_advertise()
In 6b5b6e422ee (serve: advertise session ID in v2 capabilities,
2020-11-11) the check for transfer.advertiseSID was added to the
beginning of the main serve() loop. Thus on startup of the server we'd
populate it.
Let's instead use an explicit lazy initialization pattern in
session_id_advertise() itself, we'll still look the config up only
once per-process, but by moving it out of serve() itself the further
changing of that routine becomes easier.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
serve.[ch]: don't pass "struct strvec *keys" to commands
The serve.c API added in ed10cb952d3 (serve: introduce git-serve,
2018-03-15) was passing in the raw capabilities "keys", but nothing
downstream of it ever used them.
Let's remove that code because it's not needed. If we do end up
needing to pass information about the advertisement in the future
it'll make more sense to have serve.c parse the capabilities keys and
pass the result of its parsing, rather than expecting expecting its
API users to parse the same keys again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the declaration of the protocol_capability struct to use
designated initializers, this makes this more verbose now, but a
follow-up commit will add a new field. At that point these lines would
be too dense to be on one line comfortably.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
transport: rename "fetch" in transport_vtable to "fetch_refs"
Rename the "fetch" member of the transport_vtable to "fetch_refs" for
consistency with the existing "push_refs". Neither of them just push
"refs" but refs and objects, but having the two match makes the code
more readable than having it be inconsistent, especially since
"fetch_refs" is a lot easier to grep for than "fetch".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The has_capability() function introduced in ed10cb952d3 (serve:
introduce git-serve, 2018-03-15) has never been used anywhere except
serve.c, so let's mark it as static.
It was later changed from "extern" in 554544276a6 (*.[ch]: remove
extern from function declarations using spatch, 2019-04-29), but we
could have simply marked it as "static" instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 4 Aug 2021 23:50:54 +0000 (23:50 +0000)]
Update error message and code comment
There were two locations in the code that referred to 'merge-recursive'
but which were also applicable to 'merge-ort'. Update them to more
general wording.
Acked-by: Derrick Stolee <dstolee@microsoft.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 4 Aug 2021 23:50:52 +0000 (23:50 +0000)]
git-rebase.txt: correct out-of-date and misleading text about renames
Commit 58634dbff8 ("rebase: Allow merge strategies to be used when
rebasing", 2006-06-21) added the --merge option to git-rebase so that
renames could be detected (at least when using the `recursive` merge
backend). However, git-am -3 gained that same ability in commit 579c9bb198 ("Use merge-recursive in git-am -3.", 2006-12-28). As such,
the comment about being able to detect renames is not particularly
noteworthy. Remove it.
Acked-by: Derrick Stolee <dstolee@microsoft.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 4 Aug 2021 23:50:50 +0000 (23:50 +0000)]
merge-strategies.txt: avoid giving special preference to patience algorithm
We already have diff-algorithm that explains why there are special diff
algorithms, so we do not need to re-explain patience. patience exists
as its own toplevel option for historical reasons, but there's no reason
to give it special preference or document it again and suggest it's more
important than other diff algorithms, so just refer to it as a
deprecated shorthand for `diff-algorithm=patience`.
Acked-by: Derrick Stolee <dstolee@microsoft.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 4 Aug 2021 23:50:49 +0000 (23:50 +0000)]
merge-strategies.txt: do not imply using copy detection is desired
Stating that the recursive strategy "currently cannot make use of
detected copies" implies that this is a technical shortcoming of the
current algorithm. I disagree with that. I don't see how copies could
possibly be used in a sane fashion in a merge algorithm -- would we
propagate changes in one file on one side of history to each copy of
that file when merging? That makes no sense to me. I cannot think of
anything else that would make sense either. Change the wording to
simply state that we ignore any copies.
Acked-by: Derrick Stolee <dstolee@microsoft.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 4 Aug 2021 23:50:48 +0000 (23:50 +0000)]
merge-strategies.txt: update wording for the resolve strategy
It is probably helpful to cover the default merge strategy first, so
move the text for the resolve strategy to later in the document.
Further, the wording for "resolve" claimed that it was "considered
generally safe and fast", which might imply in some readers minds that
the same is not true of other strategies. Rather than adding this text
to all the strategies, just remove it from this one.
Acked-by: Derrick Stolee <dstolee@microsoft.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 4 Aug 2021 23:50:47 +0000 (23:50 +0000)]
Documentation: edit awkward references to `git merge-recursive`
A few places in the documentation referred to the "`recursive` strategy"
using the phrase "`git merge-recursive`", suggesting that it was forking
subprocesses to call a toplevel builtin. Perhaps that was relevant to
when rebase was a shell script, but it seems like a rather indirect way
to refer to the `recursive` strategy. Simplify the references.
Acked-by: Derrick Stolee <dstolee@microsoft.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 4 Aug 2021 23:50:46 +0000 (23:50 +0000)]
directory-rename-detection.txt: small updates due to merge-ort optimizations
In commit 0c4fd732f0 ("Move computation of dir_rename_count from
merge-ort to diffcore-rename", 2021-02-27), much of the logic for
computing directory renames moved into diffcore-rename.
directory-rename-detection.txt had claims that all of that logic was
found in merge-recursive. Update the documentation.
Acked-by: Derrick Stolee <dstolee@microsoft.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 4 Aug 2021 23:50:45 +0000 (23:50 +0000)]
git-rebase.txt: correct antiquated claims about --rebase-merges
When --rebase-merges was first introduced, it only worked with the
`recursive` strategy. Some time later, it gained support for merges
using the `octopus` strategy. The limitation of only supporting these
two strategies was documented in 25cff9f109 ("rebase -i --rebase-merges:
add a section to the man page", 2018-04-25) and lifted in e145d99347
("rebase -r: support merge strategies other than `recursive`",
2019-07-31). However, when the limitation was lifted, the documentation
was not updated. Update it now.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows rmdir() equivalent behaves differently from POSIX ones in
that when used on a symbolic link that points at a directory, the
target directory gets removed, which has been corrected.
* tb/mingw-rmdir-symlink-to-directory:
mingw: align symlinks-related rmdir() behavior with Linux
Junio C Hamano [Wed, 4 Aug 2021 20:28:54 +0000 (13:28 -0700)]
Merge branch 'en/ort-perf-batch-14'
Further optimization on "merge -sort" backend.
* en/ort-perf-batch-14:
merge-ort: restart merge with cached renames to reduce process entry cost
merge-ort: avoid recursing into directories when we don't need to
merge-ort: defer recursing into directories when merge base is matched
merge-ort: add a handle_deferred_entries() helper function
merge-ort: add data structures for allowable trivial directory resolves
merge-ort: add some more explanations in collect_merge_info_callback()
merge-ort: resolve paths early when we have sufficient information
Junio C Hamano [Wed, 4 Aug 2021 20:28:52 +0000 (13:28 -0700)]
Merge branch 'ah/plugleaks'
Leak plugging.
* ah/plugleaks:
reset: clear_unpack_trees_porcelain to plug leak
builtin/rebase: fix options.strategy memory lifecycle
builtin/merge: free found_ref when done
builtin/mv: free or UNLEAK multiple pointers at end of cmd_mv
convert: release strbuf to avoid leak
read-cache: call diff_setup_done to avoid leak
ref-filter: also free head for ATOM_HEAD to avoid leak
diffcore-rename: move old_dir/new_dir definition to plug leak
builtin/for-each-repo: remove unnecessary argv copy to plug leak
builtin/submodule--helper: release unused strbuf to avoid leak
environment: move strbuf into block to plug leak
fmt-merge-msg: free newly allocated temporary strings when done
Junio C Hamano [Wed, 4 Aug 2021 20:28:52 +0000 (13:28 -0700)]
Merge branch 'ar/submodule-add'
Rewrite of "git submodule" in C continues.
* ar/submodule-add:
submodule: drop unused sm_name parameter from show_fetch_remotes()
submodule--helper: introduce add-clone subcommand
submodule--helper: refactor module_clone()
submodule: prefix die messages with 'fatal'
t7400: test failure to add submodule in tracked path
fetch-pack: speed up loading of refs via commit graph
When doing reference negotiation, git-fetch-pack(1) is loading all refs
from disk in order to determine which commits it has in common with the
remote repository. This can be quite expensive in repositories with many
references though: in a real-world repository with around 2.2 million
refs, fetching a single commit by its ID takes around 44 seconds.
Dominating the loading time is decompression and parsing of the objects
which are referenced by commits. Given the fact that we only care about
commits (or tags which can be peeled to one) in this context, there is
thus an easy performance win by switching the parsing logic to make use
of the commit graph in case we have one available. Like this, we avoid
hitting the object database to parse these commits but instead only load
them from the commit-graph. This results in a significant performance
boost when executing git-fetch in said repository with 2.2 million refs:
Benchmark #1: HEAD~: git fetch $remote $commit
Time (mean ± σ): 44.168 s ± 0.341 s [User: 42.985 s, System: 1.106 s]
Range (min … max): 43.565 s … 44.577 s 10 runs
Benchmark #2: HEAD: git fetch $remote $commit
Time (mean ± σ): 19.498 s ± 0.724 s [User: 18.751 s, System: 0.690 s]
Range (min … max): 18.629 s … 20.454 s 10 runs
Summary
'HEAD: git fetch $remote $commit' ran
2.27 ± 0.09 times faster than 'HEAD~: git fetch $remote $commit'
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bagas Sanjaya [Wed, 4 Aug 2021 12:24:20 +0000 (19:24 +0700)]
diff: --pickaxe-all typofix
When I was fixing fuzzies as I updating po/id.po for 2.33.0 l10n round,
I noticed a triple-dash typo (--pickaxe-all) at diff.c, which according
to git-diff(1) manpage, the correct option name should be --pickaxe-all.
Fix the typo.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-ort: remove compile-time ability to turn off usage of memory pools
Simplify code maintenance by removing the ability to toggle between
usage of memory pools and direct allocations. This allows us to also
remove paths_to_free since it was solely about bookkeeping to make sure
we freed the necessary paths, and allows us to remove some auxiliary
functions.
Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Bétous [Mon, 2 Aug 2021 21:07:30 +0000 (21:07 +0000)]
mingw: align symlinks-related rmdir() behavior with Linux
When performing a rebase, rmdir() is called on the folder .git/logs. On
Unix rmdir() exits without deleting anything in case .git/logs is a
symbolic link but the equivalent functions on Windows (_rmdir, _wrmdir
and RemoveDirectoryW) do not behave the same and remove the folder if it
is symlinked even if it is not empty.
This creates issues when folders in .git/ are symlinks which is
especially the case when git-repo[1] is used: It replaces `.git/logs/`
with a symlink.
One such issue is that the _target_ of that symlink is removed e.g.
during a `git rebase`, where `delete_reflog("REBASE_HEAD")` will not
only try to remove `.git/logs/REBASE_HEAD` but then recursively try to
remove the parent directories until an error occurs, a technique that
obviously relies on `rmdir()` refusing to remove a symlink.
This was reported in https://github.com/git-for-windows/git/issues/2967.
This commit updates mingw_rmdir() so that its behavior is the same as
Linux rmdir() in case of symbolic links.
To verify that Git does not regress on the reported issue, this patch
adds a regression test for the `git rebase` symptom, even if the same
`rmdir()` behavior is quite likely to cause potential problems in other
Git commands as well.
[1]: git-repo is a python tool built on top of Git which helps manage
many Git repositories. It stores all the .git/ folders in a central
place by taking advantage of symbolic links.
More information: https://gerrit.googlesource.com/git-repo/
Signed-off-by: Thomas Bétous <tomspycell@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commits we introduced new documentation that talks
about "[commit|object] prerequsite(s)", but also faithfully moved
around existing documentation that talks about the "basis".
Let's change both that moved-around documentation and other existing
documentation in the file to consistently use "[commit|object]"
prerequisite(s)" instead of talking about "basis". The mention of
"basis" isn't wrong, but readers will be helped by us using only one
term throughout the document for this concept.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite the "DESCRIPTION" section for "git bundle" to start by talking
about what bundles are in general terms, rather than diving directly
into one example of what they might be used for.
This changes documentation that's been substantially the same ever
since the command was added in 2e0afafebd8 (Add git-bundle: move
objects and references by archive, 2007-02-22).
I've split up the DESCRIPTION into that section and a "BUNDLE FORMAT"
section, it briefly discusses the format, but then links to the
technical/bundle-format.txt documentation.
The "the user must specify a basis" part of this is discussed below in
"SPECIFYING REFERENCES", and will be further elaborated on in a
subsequent commit. So I'm removing that part and letting the mention
of "revision exclusions" suffice.
There was a discussion about whether to say anything at all about
"thin packs" here[1]. I think it's good to mention it for the curious
reader willing to read the technical docs, but let's explicitly say
that there's no "thick pack", and that the difference shouldn't
matter.
Elaborate on the restriction that you cannot provide a revision that
doesn't resolve to a reference in the "SPECIFYING REFERENCES" section
with examples.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
By doing ls -1 .git/{reftable,refs/heads}, we can capture changes to both
reftable and packed/loose ref storage.
This relies on the fact that git-pack-refs (which we're looking for here)
changes the number (loose/packed storage) and/or names (reftable) files used for
ref storage.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7064: use update-ref -d to remove upstream branch
The previous code tested this by writing $ZERO_OID explicitly in the packed-refs
file. This is a type of corruption that doesn't reflect realistic use-cases. In
addition, even the ref-store test-tool refuses to write invalid OIDs.
(update-ref interprets $ZERO_OID is deleting the ref).
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test takes a lock on the target of a symref, and then verifies that it is
possible to expire the symref's reflog. In reftable, one can only take a global
lock (which would prevent the symref reflog from being expired altogether.)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests verifies that "pack-refs" causes loose refs to be packed. As both
loose and packed refs are concepts specific to the files backend, mark the test
as REFFILES.
Check the outcome of the pack-refs operation. This was apparently forgotten in
the commit introducing this test: 16feb99d (Mar 26 2017, "t1405: some basic
tests on main ref store").
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: drop support for curl < 7.19.3 and < 7.17.0 (again)
Remove the conditional use of CURLAUTH_DIGEST_IE and
CURLOPT_USE_SSL. These two have been split from earlier simpler checks
against LIBCURL_VERSION_NUM for ease of review.
René Scharfe [Fri, 30 Jul 2021 19:06:58 +0000 (21:06 +0200)]
use fspathhash() everywhere
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduced the function fspathhash() for calculating path hashes while
respecting the configuration option core.ignorecase. Call it instead of
open-coding it; the resulting code is shorter and less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 30 Jul 2021 17:59:44 +0000 (19:59 +0200)]
http: drop support for curl < 7.19.4
In the last commit we dropped support for curl < 7.16.0, let's
continue that and drop support for versions older than 7.19.3. This
allows us to simplify the code by getting rid of some "#ifdef"'s.
Git was broken with vanilla curl < 7.19.4 from v2.12.0 until
v2.15.0. Compiling with it was broken by using CURLPROTO_* outside any
"#ifdef" in aeae4db174 (http: create function to get curl allowed
protocols, 2016-12-14), and fixed in v2.15.0 in f18777ba6ef (http: fix
handling of missing CURLPROTO_*, 2017-08-11).
It's unclear how much anyone was impacted by that in practice, since
as noted in [1] RHEL versions using curl older than that still
compiled, because RedHat backported some features. Perhaps other
vendors did the same.
Still, it's one datapoint indicating that it wasn't in active use at
the time. That (the v2.12.0 release) was in Feb 24, 2017, with v2.15.0
on Oct 30, 2017, it's now mid-2021.
1. http://lore.kernel.org/git/c8a2716d-76ac-735c-57f9-175ca3acbcb0@jupiterrise.com;
followed-up by f18777ba6ef (http: fix handling of missing CURLPROTO_*,
2017-08-11)
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0001: fix broken not-quite getcwd(3) test in bed67874e2
With a54e938e5b (strbuf: support long paths w/o read rights in
strbuf_getcwd() on FreeBSD, 2017-03-26) we had t0001 break on systems
like OpenBSD and AIX whose getcwd(3) has standard (but not like glibc
et al) behavior.
This was partially fixed in bed67874e2 (t0001: skip test with
restrictive permissions if getpwd(3) respects them, 2017-08-07).
The problem with that fix is that while its analysis of the problem is
correct, it doesn't actually call getcwd(3), instead it invokes "pwd
-P". There is no guarantee that "pwd -P" is going to call getcwd(3),
as opposed to e.g. being a shell built-in.
On AIX under both bash and ksh this test breaks because "pwd -P" will
happily display the current working directory, but getcwd(3) called by
the "git init" we're testing here will fail to get it.
I checked whether clobbering the $PWD environment variable would
affect it, and it didn't. Presumably these shells keep track of their
working directory internally.
There's possible follow-up work here in teaching strbuf_getcwd() to
get the working directory with whatever method "pwd" uses on these
platforms. See [1] for a discussion of that, but let's take the easy
way out here and just skip these tests by fixing the
GETCWD_IGNORES_PERMS prerequisite to match the limitations of
strbuf_getcwd().
projects / thirdparty / git.git / log
