Junio C Hamano [Mon, 25 Jan 2021 22:19:16 +0000 (14:19 -0800)]
Merge branch 'ab/mktag'
"git mktag" validates its input using its own rules before writing
a tag object---it has been updated to share the logic with "git
fsck".
* ab/mktag: (23 commits)
mktag: add a --[no-]strict option
mktag: mark strings for translation
mktag: convert to parse-options
mktag: allow omitting the header/body \n separator
mktag: allow turning off fsck.extraHeaderEntry
fsck: make fsck_config() re-usable
mktag: use fsck instead of custom verify_tag()
mktag: use puts(str) instead of printf("%s\n", str)
mktag: remove redundant braces in one-line body "if"
mktag: use default strbuf_read() hint
mktag tests: test verify_object() with replaced objects
mktag tests: improve verify_object() test coverage
mktag tests: test "hash-object" compatibility
mktag tests: stress test whitespace handling
mktag tests: run "fsck" after creating "mytag"
mktag tests: don't create "mytag" twice
mktag tests: don't redirect stderr to a file needlessly
mktag tests: remove needless SHA-1 hardcoding
mktag tests: use "test_commit" helper
mktag tests: don't needlessly use a subshell
...
grep/pcre2: better support invalid UTF-8 haystacks
Improve the support for invalid UTF-8 haystacks given a non-ASCII
needle when using the PCREv2 backend.
This is a more complete fix for a bug I started to fix in 870eea8166 (grep: do not enter PCRE2_UTF mode on fixed matching,
2019-07-26), now that PCREv2 has the PCRE2_MATCH_INVALID_UTF mode we
can make use of it.
This fixes the sort of case described in 8a5999838e (grep: stess test
PCRE v2 on invalid UTF-8 data, 2019-07-26), i.e.:
- The subject string is non-ASCII (e.g. "ævar")
- We're under a is_utf8_locale(), e.g. "en_US.UTF-8", not "C"
- We are using --ignore-case, or we're a non-fixed pattern
If those conditions were satisfied and we matched found non-valid
UTF-8 data PCREv2 might bark on it, in practice this only happened
under the JIT backend (turned on by default on most platforms).
Ultimately this fixes a "regression" in b65abcafc7 ("grep: use PCRE v2
for optimized fixed-string search", 2019-07-01), I'm putting that in
scare-quotes because before then we wouldn't properly support these
complex case-folding, locale etc. cases either, it just broke in
different ways.
There was a bug related to this the PCRE2_NO_START_OPTIMIZE flag fixed
in PCREv2 10.36. It can be worked around by setting the
PCRE2_NO_START_OPTIMIZE flag. Let's do that in those cases, and add
tests for the bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep/pcre2 tests: don't rely on invalid UTF-8 data test
As noted in [1] when I originally added this test in [2] the test was
completely broken as it lacked a redirect[3]. I now think this whole
thing is overly fragile. Let's only test if we have a segfault here.
Before this the first test's "test_cmp" was pretty meaningless. We
were only testing if PCREv2 was so broken that it would spew out
something completely unrelated on stdout, which isn't very plausible.
In the second test we're relying on PCREv2 forever holding to the
current behavior of the PCRE_UTF8 flag, as opposed to learning some
optimistic graceful fallback to PCRE2_MATCH_INVALID_UTF in the
future. If that happens having this test broken under bisecting would
suck.
A follow-up commit will actually test this case in a meaningful way
under the PCRE2_MATCH_INVALID_UTF flag. Let's run this one
unconditionally, and just make sure we don't segfault.
1. e714b898c6 (t7812: expect failure for grep -i with invalid UTF-8
data, 2019-11-29)
2. 8a5999838e (grep: stess test PCRE v2 on invalid UTF-8 data,
2019-07-26)
3. c74b3cbb83 (t7812: add missing redirects, 2019-11-26)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 24 Jan 2021 06:01:12 +0000 (22:01 -0800)]
merge-ort: begin performance work; instrument with trace2_region_* calls
Add some timing instrumentation for both merge-ort and diffcore-rename;
I used these to measure and optimize performance in both, and several
future patch series will build on these to reduce the timings of some
select testcases.
=== Setup ===
The primary testcase I used involved rebasing a random topic in the
linux kernel (consisting of 35 patches) against an older version. I
added two variants, one where I rename a toplevel directory, and another
where I only rebase one patch instead of the whole topic. The setup is
as follows:
Now with REBASE standing for either "git rebase [--merge]" (using
merge-recursive) or "test-tool fast-rebase" (using merge-ort), the
testcases are:
Testcase #1: no-renames
$ git checkout v5.4^0
$ REBASE --onto HEAD base hwmon-updates
Note: technically the name is misleading; there are some renames, but
very few. Rename detection only takes about half the overall time.
Testcase #2: mega-renames
$ git checkout 5.4-renames^0
$ REBASE --onto HEAD base hwmon-updates
Testcase #3: just-one-mega
$ git checkout 5.4-renames^0
$ REBASE --onto HEAD base hwmon-just-one
=== Timing results ===
Overall timings, using hyperfine (1 warmup run, 3 runs for mega-renames,
10 runs for the other two cases):
merge-recursive merge-ort
no-renames: 18.912 s ± 0.174 s 14.263 s ± 0.053 s
mega-renames: 5964.031 s ± 10.459 s 5504.231 s ± 5.150 s
just-one-mega: 149.583 s ± 0.751 s 158.534 s ± 0.498 s
A single re-run of each with some breakdowns:
--- no-renames ---
merge-recursive merge-ort
overall runtime: 19.302 s 14.257 s
inexact rename detection: 7.603 s 7.906 s
everything else: 11.699 s 6.351 s
--- mega-renames ---
merge-recursive merge-ort
overall runtime: 5950.195 s 5499.672 s
inexact rename detection: 5746.309 s 5487.120 s
everything else: 203.886 s 17.552 s
--- just-one-mega ---
merge-recursive merge-ort
overall runtime: 151.001 s 158.582 s
inexact rename detection: 143.448 s 157.835 s
everything else: 7.553 s 0.747 s
=== Timing observations ===
0) Maximum speedup
The "everything else" row represents the maximum speedup we could
achieve if we were to somehow infinitely parallelize inexact rename
detection, but leave everything else alone. The fact that this is so
much smaller than the real runtime (even in the case with virtually no
renames) makes it clear just how overwhelmingly large the time spent on
rename detection can be.
1) no-renames
1a) merge-ort is faster than merge-recursive, which is nice. However,
this still should not be considered good enough. Although the "merge"
backend to rebase (merge-recursive) is sometimes faster than the "apply"
backend, this is one of those cases where it is not. In fact, even
merge-ort is slower. The "apply" backend can complete this testcase in
6.940 s ± 0.485 s
which is about 2x faster than merge-ort and 3x faster than
merge-recursive. One goal of the merge-ort performance work will be to
make it faster than git-am on this (and similar) testcases.
2) mega-renames
2a) Obviously rename detection is a huge cost; it's where most the time
is spent. We need to cut that down. If we could somehow infinitely
parallelize it and drive its time to 0, the merge-recursive time would
drop to about 204s, and the merge-ort time would drop to about 17s. I
think this particular stat shows I've subtly baked a couple performance
improvements into merge-ort and into fast-rebase already.
3) just-one-mega
3a) not much to say here, it just gives some flavor for how rebasing
only one patch compares to rebasing 35.
=== Goals ===
This patch is obviously just the beginning. Here are some of my goals
that this measurement will help us achieve:
* Drive the cost of rename detection down considerably for merges
* After the above has been achieved, see if there are other slowness
factors (which would have previously been overshadowed by rename
detection costs) which we can then focus on and also optimize.
* Ensure our rebase testcase that requires little rename detection
is noticeably faster with merge-ort than with apply-based rebase.
Signed-off-by: Elijah Newren <newren@gmail.com> Acked-by: Taylor Blau <ttaylorr@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 24 Jan 2021 06:01:11 +0000 (22:01 -0800)]
merge-ort: ignore the directory rename split conflict for now
get_provisional_directory_renames() has code to detect directories being
evenly split between different locations. However, as noted previously,
if there are no new files added to that directory that was split evenly,
our inability to determine where the directory was renamed to doesn't
matter since there are no new files to try to move into the new
location. Unfortunately, that code is unaware of whether there are new
files under the directory in question and we just ignore that, causing
us to fail t6423 test 2b but pass test 2a; turn off the error for now,
swapping which tests pass and fail.
The motivating reason for switching this off as a temporary measure is
that as we add optimizations, we'll start looking at only subsets of
renames, and subsets of renames can start switching the result we get
when this error is (wrongly) on. Once we get enough optimizations,
however, we can prevent that code from even running when there are no
new files added to the relevant directory, at which point we can revert
this commit and then both testcases 2a and 2b will pass simultaneously.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 24 Jan 2021 06:01:10 +0000 (22:01 -0800)]
merge-ort: fix massive leak
When a series of merges was performed (such as for a rebase or series of
cherry-picks), only the data structures allocated by the final merge
operation were being freed. The problem was that while picking out
pieces of merge-ort to upstream, I previously misread a certain section
of merge_start() and assumed it was associated with a later
optimization. Include that section now, which ensures that if there was
a previous merge operation, that we clear out result->priv and then
re-use it for opt->priv, and otherwise we allocate opt->priv.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove support for using version 1 of the PCRE library. Its use has
been discouraged by upstream for a long time, and it's in a
bugfix-only state.
Anyone who was relying on v1 in particular got a nudge to move to v2
in e6c531b808 (Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1,
2018-03-11), which was first released as part of v2.18.0.
With this the LIBPCRE2 test prerequisites is redundant to PCRE. But
I'm keeping it for self-documentation purposes, and to avoid conflict
with other in-flight PCRE patches.
I'm also not changing all of our own "pcre2" names to "pcre", i.e. the
inverse of 6d4b5747f0 (grep: change internal *pcre* variable &
function names to be *pcre1*, 2017-05-25). I don't see the point, and
it makes the history/blame harder to read. Maybe if there's ever a
PCRE v3...
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.mak.uname: remove redundant NO_LIBPCRE1_JIT flag
Remove a flag added in my fb95e2e38d (grep: un-break building with
PCRE >= 8.32 without --enable-jit, 2017-06-01). It's set just below
USE_LIBPCRE=YesPlease, so it's been redundant since e6c531b808 (Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1,
2018-03-11).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Sat, 23 Jan 2021 19:58:19 +0000 (19:58 +0000)]
t1092: test interesting sparse-checkout scenarios
These also document some behaviors that differ from a full checkout, and
possibly in a way that is not intended.
The test is designed to be run with "--run=1,X" where 'X' is an
interesting test case. Each test uses 'init_repos' to reset the full and
sparse copies of the initial-repo that is created by the first test
case. This also makes it possible to have test cases leave the working
directory or index in unusual states without disturbing later cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Sat, 23 Jan 2021 21:07:08 +0000 (16:07 -0500)]
test-lib: test_region looks for trace2 regions
From ff15d509b89edd4830d85d53cea3079a6b0c1c08 Mon Sep 17 00:00:00 2001
From: Derrick Stolee <dstolee@microsoft.com>
Date: Mon, 11 Jan 2021 08:53:09 -0500
Subject: [PATCH 8/9] test-lib: test_region looks for trace2 regions
Most test cases can verify Git's behavior using input/output
expectations or changes to the .git directory. However, sometimes we
want to check that Git did or did not run a certain section of code.
This is particularly important for performance-only features that we
want to ensure have been enabled in certain cases.
Add a new 'test_region' function that checks if a trace2 region was
entered and left in a given trace2 event log.
There is one existing test (t0500-progress-display.sh) that performs
this check already, so use the helper function instead. Note that this
changes the expectations slightly. The old test (incorrectly) used two
patterns for the 'grep' invocation, but this performs an OR of the
patterns, not an AND. This means that as long as one region_enter event
was logged, the test would succeed, even if it was not due to the
progress category.
More uses will be added in a later change.
t6423-merge-rename-directories.sh also greps for region_enter lines, but
it verifies the number of such lines, which is not the same as an
existence check.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Sat, 23 Jan 2021 19:58:17 +0000 (19:58 +0000)]
sparse-checkout: load sparse-checkout patterns
A future feature will want to load the sparse-checkout patterns into a
pattern_list, but the current mechanism to do so is a bit complicated.
This is made difficult due to needing to find the sparse-checkout file
in different ways throughout the codebase.
The logic implemented in the new get_sparse_checkout_patterns() was
duplicated in populate_from_existing_patterns() in unpack-trees.c. Use
the new method instead, keeping the logic around handling the struct
unpack_trees_options.
The callers to get_sparse_checkout_filename() in
builtin/sparse-checkout.c manipulate the sparse-checkout file directly,
so it is not appropriate to replace logic in that file with
get_sparse_checkout_patterns().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Sat, 23 Jan 2021 19:58:16 +0000 (19:58 +0000)]
name-hash: use trace2 regions for init
The lazy_init_name_hash() populates a hashset with all filenames and
another with all directories represented in the index. This is run only
if we need to use the hashsets to check for existence or case-folding
renames.
Place trace2 regions where there is already a performance trace.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Sat, 23 Jan 2021 19:58:15 +0000 (19:58 +0000)]
repository: add repo reference to index_state
It will be helpful to add behavior to index operations that might
trigger an object lookup. Since each index belongs to a specific
repository, add a 'repo' pointer to struct index_state that allows
access to this repository.
Add a BUG() statement if the repo already has an index, and the index
already has a repo, but somehow the index points to a different repo.
This will prevent future changes from needing to pass an additional
'struct repository *repo' parameter and instead rely only on the 'struct
index_state *istate' parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Sat, 23 Jan 2021 19:58:14 +0000 (19:58 +0000)]
fsmonitor: de-duplicate BUG()s around dirty bits
The index has an fsmonitor_dirty bitmap that records which index entries
are "dirty" based on the response from the FSMonitor. If this bitmap
ever grows larger than the index, then there was an error in how it was
constructed, and it was probably a developer's bug.
There are several BUG() statements that are very similar, so replace
these uses with a simpler assert_index_minimum(). Since there is one
caller that uses a custom 'pos' value instead of the bit_size member, we
cannot simplify it too much. However, the error string is identical in
each, so this simplifies things.
Be sure to add one when checking if a position if valid, since the
minimum is a bound on the expected size.
The end result is that the code is simpler to read while also preserving
these assertions for developers in the FSMonitor space.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Sat, 23 Jan 2021 19:58:13 +0000 (19:58 +0000)]
cache-tree: extract subtree_pos()
This method will be helpful to use outside of cache-tree.c in a later
feature. The implementation is subtle due to subtree_name_cmp() sorting
by length and then lexicographically.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Sat, 23 Jan 2021 19:58:12 +0000 (19:58 +0000)]
cache-tree: simplify verify_cache() prototype
The verify_cache() method takes an array of cache entries and a count,
but these are always provided directly from a struct index_state. Use
a pointer to the full structure instead.
There is a subtle point when istate->cache_nr is zero that subtracting
one will underflow. This triggers a failure in t0000-basic.sh, among
others. Use "i + 1 < istate->cache_nr" to avoid these strange
comparisons. Convert i to be unsigned as well, which also removes the
potential signed overflow in the unlikely case that cache_nr is over 2.1
billion entries. The 'funny' variable has a maximum value of 11, so
making it unsigned does not change anything of importance.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Sat, 23 Jan 2021 19:58:11 +0000 (19:58 +0000)]
cache-tree: clean up cache_tree_update()
Make the method safer by allocating a cache_tree member for the given
index_state if it is not already present. This is preferrable to a
BUG() statement or returning with an error because future callers will
want to populate an empty cache-tree using this method.
Callers can also remove their conditional allocations of cache_tree.
Also drop local variables that can be found directly from the 'istate'
parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rm tests: actually test for SIGPIPE in SIGPIPE test
Change a test initially added in 50cd31c652 (t3600: comment on
inducing SIGPIPE in `git rm`, 2019-11-27) to explicitly test for
SIGPIPE using a pattern initially established in 7559a1be8a (unblock
and unignore SIGPIPE, 2014-09-18).
The problem with using that pattern is that it requires us to skip the
test on MINGW[1]. If we kept the test with its initial semantics[2]
we'd get coverage there, at the cost of not checking whether we
actually had SIGPIPE outside of MinGW.
Arguably we should just remove this test. Between the test added in 7559a1be8a and the change made in 12e0437f23 (common-main: call
restore_sigpipe_to_default(), 2016-07-01) it's a bit arbitrary to only
check this for "git rm".
But in lieu of having wider test coverage for other "git" subcommands
let's refactor this to explicitly test for SIGPIPE outside of MinGW,
and then just that we remove the ".git/index.lock" (as before) on all
platforms.
1. https://lore.kernel.org/git/xmqq1rec5ckf.fsf@gitster.c.googlers.com/
2. 0693f9ddad (Make sure lockfiles are unlocked when dying on SIGPIPE,
2008-12-18)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
archive tests: use a cheaper "zipinfo -h" invocation to get header
Change an invocation of zipinfo added in 19ee29401d (t5004: test ZIP
archives with many entries, 2015-08-22) to simply ask zipinfo for the
header info, rather than spewing out info about the entire archive and
race to kill it with SIGPIPE due to the downstream "head -2".
I ran across this because I'm adding a "set -o pipefail" test
mode. This won't be needed for the version of the mode that I'm
introducing (which currently relies on a patch to GNU bash), but I
think this is a good idea anyway.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack tests: avoid a non-zero "grep" exit status
Continue changing a test that 763b47bafa (t5703: stop losing return
codes of git commands, 2019-11-27) already refactored.
This was originally added as part of a series to add support for
running under bash's "set -o pipefail", under that mode this test will
fail because sometimes there's no commits in the "objs" output.
It's easier to fix that than exempt these tests under a hypothetical
"set -o pipefail" test mode. It looks like we probably won't have
that, but once we've dug this code up let's refactor it[2] so we don't
hide a potential pipe failure.
Jeff King [Sat, 23 Jan 2021 13:00:43 +0000 (14:00 +0100)]
git-svn tests: rewrite brittle tests to use "--[no-]merges".
Rewrite a brittle tests which used "rev-list" without "--[no-]merges"
to figure out if a set of commits turned into merge commits or not.
Signed-off-by: Jeff King <peff@peff.net>
[ÆAB: wrote commit message] Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "<file" instead of "< file", and don't put the closing quote for
strings on an indented line. This makes a follow-up refactoring commit
easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache-tree tests: explicitly test HEAD and index differences
The test code added in 9c4d6c0297 (cache-tree: Write updated
cache-tree after commit, 2014-07-13) used "ls-files" in lieu of
"ls-tree" because it wanted to test the data in the index, since this
test is testing the cache-tree extension.
Change the test to instead use "ls-tree" for traversal, and then
explicitly check how HEAD differs from the index. This is more easily
understood, and less fragile as numerous past bug fixes[1][2][3] to
the old code we're replacing demonstrate.
As an aside this would be a bit easier if empty pathspecs hadn't been
made an error in d426430e6e (pathspec: warn on empty strings as
pathspec, 2016-06-22) and 9e4e8a64c2 (pathspec: die on empty strings
as pathspec, 2017-06-06).
If that was still allowed this code could be simplified slightly:
cache-tree tests: use a sub-shell with less indirection
Change a "cd xyz && work && cd .." pattern introduced in 9c4d6c0297 (cache-tree: Write updated cache-tree after commit,
2014-07-13) to use a sub-shell instead with less indirection.
We did actually recover correctly if we failed in this function since
we were wrapped in a subshell one function call up. Let's just use the
sub-shell at the point where we want to change the directory
instead.
It's important that the "|| return 1" is outside the
subshell. Normally, we `exit 1` from within subshells[1], but that
wouldn't help us exit this loop early[1][2].
Since we can get rid of the wrapper function let's rename the main
function to drop the "rec" (for "recursion") suffix[3].
Remove the $2 paramater. This appears to have been some
work-in-progress code from an earlier version of 9c4d6c0297 (cache-tree: Write updated cache-tree after commit,
2014-07-13) which was left in the final version.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ZheNing Hu [Sat, 23 Jan 2021 10:20:10 +0000 (10:20 +0000)]
ls-files.c: add --deduplicate option
During a merge conflict, the name of a file may appear multiple
times in "git ls-files" output, once for each stage. If you use
both `--delete` and `--modify` at the same time, the output may
mention a deleted file twice.
When none of the '-t', '-u', or '-s' options is in use, these
duplicate entries do not add much value to the output.
Introduce a new '--deduplicate' option to suppress them.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: extended doc and rewritten commit log] Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 20 Jan 2021 16:04:30 +0000 (11:04 -0500)]
ls-refs.c: traverse prefixes of disjoint "ref-prefix" sets
ls-refs performs a single revision walk over the whole ref namespace,
and sends ones that match with one of the given ref prefixes down to the
user.
This can be expensive if there are many refs overall, but the portion of
them covered by the given prefixes is small by comparison.
To attempt to reduce the difference between the number of refs
traversed, and the number of refs sent, only traverse references which
are in the longest common prefix of the given prefixes. This is very
reminiscent of the approach taken in b31e2680c4 (ref-filter.c: find
disjoint pattern prefixes, 2019-06-26) which does an analogous thing for
multi-patterned 'git for-each-ref' invocations.
The callback 'send_ref' is resilient to ignore extra patterns by
discarding any arguments which do not begin with at least one of the
specified prefixes.
Similarly, the code introduced in b31e2680c4 is resilient to stop early
at metacharacters, but we only pass strict prefixes here. At worst we
would return too many results, but the double checking done by send_ref
will throw away anything that doesn't start with something in the prefix
list.
Finally, if no prefixes were provided, then implicitly add the empty
string (which will match all references) since this matches the existing
behavior (see the "no restrictions" comment in "ls-refs.c:ref_match()").
Original-patch-by: Jacob Vosmaer <jacob@gitlab.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Vosmaer [Wed, 20 Jan 2021 16:04:25 +0000 (11:04 -0500)]
ls-refs.c: initialize 'prefixes' before using it
Correctly initialize the "prefixes" strvec using strvec_init() instead
of simply zeroing it via the earlier memset().
There's no way to trigger a crash, since the first 'ref-prefix' command
will initialize the strvec via the 'ALLOC_GROW' in 'strvec_push_nodup()'
(the alloc and nr variables are already zero'd, so the call to
ALLOC_GROW is valid).
If no "ref-prefix" command was given, then the call to
'ls-refs.c:ref_match()' will abort early after it reads the zero in
'prefixes->nr'. Likewise, strvec_clear() will only call free() on the
array, which is NULL, so we're safe there, too.
But, all of this is dangerous and requires more reasoning than it would
if we simply called 'strvec_init()', so do that.
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 20 Jan 2021 16:04:21 +0000 (11:04 -0500)]
refs: expose 'for_each_fullref_in_prefixes'
This function was used in the ref-filter.c code to find the longest
common prefix of among a set of refspecs, and then to iterate all of the
references that descend from that prefix.
A future patch will want to use that same code from ls-refs.c, so
prepare by exposing and moving it to refs.c. Since there is nothing
specific to the ref-filter code here (other than that it was previously
the only caller of this function), this really belongs in the more
generic refs.h header.
The code moved in this patch is identical before and after, with the one
exception of renaming some arguments to be consistent with other
functions exposed in refs.h.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Vosmaer [Wed, 20 Jan 2021 12:45:14 +0000 (13:45 +0100)]
builtin/pack-objects.c: avoid iterating all refs
In git-pack-objects, we iterate over all the tags if the --include-tag
option is passed on the command line. For some reason this uses
for_each_ref which is expensive if the repo has many refs. We should
use for_each_tag_ref instead.
Because the add_ref_tag callback will now only visit tags we
simplified it a bit.
The motivation for this change is that we observed performance issues
with a repository on gitlab.com that has 500,000 refs but only 2,000
tags. The fetch traffic on that repo is dominated by CI, and when we
changed CI to fetch with 'git fetch --no-tags' we saw a dramatic
change in the CPU profile of git-pack-objects. This lead us to this
particular ref walk. More details in:
https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/746#note_483546598
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 22 Jan 2021 21:03:33 +0000 (16:03 -0500)]
run-command: document use_shell option
It's unclear how run-command's use_shell option should impact the
arguments fed to a command. Plausibly it could mean that we glue all of
the arguments together into a string to pass to the shell, in which case
that opens the question of whether the caller needs to quote them.
But in fact we don't implement it that way (and even if we did, we'd
probably auto-quote the arguments as part of the glue step). And we must
not receive quoted arguments, because we might actually optimize out the
shell entirely (i.e., the caller does not even know if a shell will be
involved in the end or not).
Since this ambiguity may have been the cause of a recent bug, let's
document the option a bit.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Thu, 21 Jan 2021 02:53:30 +0000 (21:53 -0500)]
t5411: use different out file to prevent overwriting
SZEDER reported that t5411 failed in Travis CI's s390x environment a
couple of times, and could be reproduced with '--stress' test on this
specific environment. The test failure messages might look like this:
+ test_cmp expect actual
--- expect 2021-01-17 21:55:23.430750004 +0000
+++ actual 2021-01-17 21:55:23.430750004 +0000
@@ -1 +1 @@
-<COMMIT-A> refs/heads/main
+<COMMIT-A> refs/heads/maifatal: the remote end hung up unexpectedly
error: last command exited with $?=1
not ok 86 - proc-receive: not support push options (builtin protocol)
The file 'actual' is filtered from the file 'out' which contains result
of 'git show-ref' command. Due to the error messages from other process
is written into the file 'out' accidentally, t5411 failed. SZEDER finds
the root cause of this issue:
- 'git push' is executed with its standard output and error redirected
to the file 'out'.
- 'git push' executes 'git receive-pack' internally, which inherits
the open file descriptors, so its output and error goes into that
same 'out' file.
- 'git push' ends without waiting for the close of 'git-receive-pack'
for some cases, and the file 'out' is reused for test of
'git show-ref' afterwards.
- A mixture of the output of 'git show-ref' abd 'git receive-pack'
leads to this issue.
The first intuitive reaction to resolve this issue is to remove the
file 'out' after use, so that the newly created file 'out' will have a
different file descriptor and will not be overwritten by the
'git receive-pack' process. But Johannes pointed out that removing an
open file is not possible on Windows. So we use different temporary
file names to store the output of 'git push' to solve this issue.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Johannes Sixt <j6t@kdbg.org> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phil Hord [Thu, 21 Jan 2021 03:23:32 +0000 (19:23 -0800)]
use delete_refs when deleting tags or branches
'git tag -d' accepts one or more tag refs to delete, but each deletion
is done by calling `delete_ref` on each argv. This is very slow when
removing from packed refs. Use delete_refs instead so all the removals
can be done inside a single transaction with a single update.
Do the same for 'git branch -d'.
Since delete_refs performs all the packed-refs delete operations
inside a single transaction, if any of the deletes fail then all
them will be skipped. In practice, none of them should fail since
we verify the hash of each one before calling delete_refs, but some
network error or odd permissions problem could have different results
after this change.
Also, since the file-backed deletions are not performed in the same
transaction, those could succeed even when the packed-refs transaction
fails.
After deleting branches, remove the branch config only if the branch
ref was removed and was not subsequently added back in.
A manual test deleting 24,000 tags took about 30 minutes using
delete_ref. It takes about 5 seconds using delete_refs.
Acked-by: Elijah Newren <newren@gmail.com> Signed-off-by: Phil Hord <phil.hord@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 20 Jan 2021 19:44:43 +0000 (14:44 -0500)]
refs: switch peel_ref() to peel_iterated_oid()
The peel_ref() interface is confusing and error-prone:
- it's typically used by ref iteration callbacks that have both a
refname and oid. But since they pass only the refname, we may load
the ref value from the filesystem again. This is inefficient, but
also means we are open to a race if somebody simultaneously updates
the ref. E.g., this:
int some_ref_cb(const char *refname, const struct object_id *oid, ...)
{
if (!peel_ref(refname, &peeled))
printf("%s peels to %s",
oid_to_hex(oid), oid_to_hex(&peeled);
}
could print nonsense. It is correct to say "refname peels to..."
(you may see the "before" value or the "after" value, either of
which is consistent), but mentioning both oids may be mixing
before/after values.
Worse, whether this is possible depends on whether the optimization
to read from the current iterator value kicks in. So it is actually
not possible with:
for_each_ref(some_ref_cb);
but it _is_ possible with:
head_ref(some_ref_cb);
which does not use the iterator mechanism (though in practice, HEAD
should never peel to anything, so this may not be triggerable).
- it must take a fully-qualified refname for the read_ref_full() code
path to work. Yet we routinely pass it partial refnames from
callbacks to for_each_tag_ref(), etc. This happens to work when
iterating because there we do not call read_ref_full() at all, and
only use the passed refname to check if it is the same as the
iterator. But the requirements for the function parameters are quite
unclear.
Instead of taking a refname, let's instead take an oid. That fixes both
problems. It's a little funny for a "ref" function not to involve refs
at all. The key thing is that it's optimizing under the hood based on
having access to the ref iterator. So let's change the name to make it
clear why you'd want this function versus just peel_object().
There are two other directions I considered but rejected:
- we could pass the peel information into the each_ref_fn callback.
However, we don't know if the caller actually wants it or not. For
packed-refs, providing it is essentially free. But for loose refs,
we actually have to peel the object, which would be wasteful in most
cases. We could likewise pass in a flag to the callback indicating
whether the peeled information is known, but that complicates those
callbacks, as they then have to decide whether to manually peel
themselves. Plus it requires changing the interface of every
callback, whether they care about peeling or not, and there are many
of them.
- we could make a function to return the peeled value of the current
iterated ref (computing it if necessary), and BUG() otherwise. I.e.:
int peel_current_iterated_ref(struct object_id *out);
Each of the current callers is an each_ref_fn callback, so they'd
mostly be happy. But:
- we use those callbacks with functions like head_ref(), which do
not use the iteration code. So we'd need to handle the fallback
case there, anyway.
- it's possible that a caller would want to call into generic code
that sometimes is used during iteration and sometimes not. This
encapsulates the logic to do the fast thing when possible, and
fallback when necessary.
The implementation is mostly obvious, but I want to call out a few
things in the patch:
- the test-tool coverage for peel_ref() is now meaningless, as it all
collapses to a single peel_object() call (arguably they were pretty
uninteresting before; the tricky part of that function is the
fast-path we see during iteration, but these calls didn't trigger
that). I've just dropped it entirely, though note that some other
tests relied on the tags we created; I've moved that creation to the
tests where it matters.
- we no longer need to take a ref_store parameter, since we'd never
look up a ref now. We do still rely on a global "current iterator"
variable which _could_ be kept per-ref-store. But in practice this
is only useful if there are multiple recursive iterations, at which
point the more appropriate solution is probably a stack of
iterators. No caller used the actual ref-store parameter anyway
(they all call the wrapper that passes the_repository).
- the original only kicked in the optimization when the "refname"
pointer matched (i.e., not string comparison). We do likewise with
the "oid" parameter here, but fall back to doing an actual oideq()
call. This in theory lets us kick in the optimization more often,
though in practice no current caller cares. It should never be
wrong, though (peeling is a property of an object, so two refs
pointing to the same object would peel identically).
- the original took care not to touch the peeled out-parameter unless
we found something to put in it. But no caller cares about this, and
anyway, it is enforced by peel_object() itself (and even in the
optimized iterator case, that's where we eventually end up). We can
shorten the code and avoid an extra copy by just passing the
out-parameter through the stack.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
As noted in previous commits we are removing the use of
GIT_TEST_GETTEXT_POISON=false. These tests all relied on the facility
being off, it always is off after an earlier change, but we hadn't
removed the redundant assignments to "false" in the tests.
I'm preserving the deletion of "error" lines in 38b9197a76a (t5411:
add basic test cases for proc-receive hook, 2020-08-27), it turns out
that's useful even without GIT_TEST_GETTEXT_POISON=true in
play. Update a comment added in that commit to note that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the ability to inject "poison" gettext() messages via the
GIT_TEST_GETTEXT_POISON special test setup.
I initially added this as a compile-time option in bb946bba761 (i18n:
add GETTEXT_POISON to simulate unfriendly translator, 2011-02-22), and
most recently modified to be toggleable at runtime in 6cdccfce1e0 (i18n: make GETTEXT_POISON a runtime option, 2018-11-08)..
The reason for its removal is that the trade-off of maintaining it
v.s. what it's getting us has long since flipped. When gettext was
integrated in 5e9637c6297 (i18n: add infrastructure for translating
Git with gettext, 2011-11-18) there was understandable concern on the
Git ML that in marking messages for translation en-masse we'd
inadvertently mark plumbing messages. The GETTEXT_POISON facility was
a way to smoke those out via our test suite.
Nowadays however we're done (or almost entirely done) with any marking
of messages for translation. New messages are usually marked by their
authors, who'll know whether it makes sense to translate them or
not. If not any errors in marking the messages are much more likely to
be spotted in review than in the the initial deluge of i18n patches in
the 2011-2012 era.
So let's just remove this. This leaves the test suite in a state where
we still have a lot of test_i18n, C_LOCALE_OUTPUT
etc. uses. Subsequent commits will remove those too.
The change to t/lib-rebase.sh is a selective revert of the relevant
part of f2d17068fd (i18n: rebase-interactive: mark comments of squash
for translation, 2016-06-17), and the comment in
t/t3406-rebase-message.sh is from c7108bf9ed (i18n: rebase: mark
messages for translation, 2012-07-25).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent commit will remove GETTEXT_POISON entirely, let's start
by removing the CI jobs that enable the option.
We cannot just remove the job because the CI is implicitly depending
on the "poison" job being a sort of "default" job in the sense that
it's the job that was otherwise run with the default compiler, no
other GIT_TEST_* options etc. So let's keep it under the name
"linux-gcc-default".
This means we can remove the initial "make test" from the "linux-gcc"
job (it does another one after setting a bunch of GIT_TEST_*
variables).
I'm not doing that because it would conflict with the in-flight 334afbc76fb (tests: mark tests relying on the current default for
`init.defaultBranch`, 2020-11-18) (currently on the "seen" branch, so
the SHA-1 will almost definitely change). It's going to use that "make
test" again for different reasons, so let's preserve it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 21 Jan 2021 06:52:50 +0000 (22:52 -0800)]
Merge branch 'en/ort-directory-rename' into en/merge-ort-perf
* en/ort-directory-rename: (28 commits)
merge-ort: fix a directory rename detection bug
merge-ort: process_renames() now needs more defensiveness
merge-ort: implement apply_directory_rename_modifications()
merge-ort: add a new toplevel_dir field
merge-ort: implement handle_path_level_conflicts()
merge-ort: implement check_for_directory_rename()
merge-ort: implement apply_dir_rename() and check_dir_renamed()
merge-ort: implement compute_collisions()
merge-ort: modify collect_renames() for directory rename handling
merge-ort: implement handle_directory_level_conflicts()
merge-ort: implement compute_rename_counts()
merge-ort: copy get_renamed_dir_portion() from merge-recursive.c
merge-ort: add outline of get_provisional_directory_renames()
merge-ort: add outline for computing directory renames
merge-ort: collect which directories are removed in dirs_removed
merge-ort: initialize and free new directory rename data structures
merge-ort: add new data structures for directory rename detection
merge-ort: add implementation of type-changed rename handling
merge-ort: add implementation of normal rename handling
merge-ort: add implementation of rename collisions
...
Elijah Newren [Tue, 19 Jan 2021 19:53:53 +0000 (19:53 +0000)]
merge-ort: fix a directory rename detection bug
As noted in commit 902c521a35 ("t6423: more involved directory rename
test", 2020-10-15), when we have a case where
* dir/subdir/ has several files
* almost all files in dir/subdir/ are renamed to folder/subdir/
* one of the files in dir/subdir/ is renamed to folder/subdir/newsubdir/
* the other side of history (that doesn't do the renames) adds a
new file to dir/subdir/
Then for the majority of the file renames, the directory rename of
dir/subdir/ -> folder/subdir/
is actually not represented that way but as
dir/ -> folder/
We also had one rename that was represented as
dir/subdir/ -> folder/subdir/newsubdir/
Now, since there's a new file in dir/subdir/, where does it go? Well,
there's only one rule for dir/subdir/, so the code previously noted that
this rule had the "majority" of the one "relevant" rename and thus
erroneously used it to place the file in folder/subdir/newsubdir/. We
really want the heavy weight associated with dir/ -> folder/ to also be
treated as dir/subdir/ -> folder/subdir/, so that we correctly place the
file in folder/subdir/.
Add a bunch of logic to make sure that we use all relevant renamings in
directory rename detection.
Note that testcase 12f of t6423 still fails after this, but it gets
further than merge-recursive does. There are some performance related
bits in that testcase (the region_enter messages) that do not yet
succeed, but the rest of the testcase works after this patch.
Subsequent patch series will fix up the performance side.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 19 Jan 2021 19:53:52 +0000 (19:53 +0000)]
merge-ort: process_renames() now needs more defensiveness
Since directory rename detection adds new paths to opt->priv->paths and
removes old ones, process_renames() needs to now check whether
pair->one->path actually exists in opt->priv->paths instead of just
assuming it does.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function roughly follows the same outline as the function of the
same name from merge-recursive.c, but the code diverges in multiple
ways due to some special considerations:
* merge-ort's version needs to update opt->priv->paths with any new
paths (and opt->priv->paths points to struct conflict_infos which
track quite a bit of metadata for each path); merge-recursive's
version would directly update the index
* merge-ort requires that opt->priv->paths has any leading directories
of any relevant files also be included in the set of paths. And
due to pointer equality requirements on merged_info.directory_name,
we have to be careful how we compute and insert these.
* due to the above requirements on opt->priv->paths, merge-ort's
version starts with a long comment to explain all the special
considerations that need to be handled
* merge-ort can use the full data stored in opt->priv->paths to avoid
making expensive get_tree_entry() calls to regather the necessary
data.
* due to messages being deferred automatically in merge-ort, this is
the best place to handle conflict messages whereas in
merge-recursive.c they are deferred manually so that processing of
entries does all the printing
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 19 Jan 2021 19:53:50 +0000 (19:53 +0000)]
merge-ort: add a new toplevel_dir field
Due to the string-equality-iff-pointer-equality requirements placed on
merged_info.directory_name, apply_directory_rename_modifications() will
need to have access to the exact toplevel directory name string pointer
and can't just use a new empty string. Store it in a field that we can
use.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is copied from merge-recursive.c, with minor tweaks due to:
* using strmap API
* merge-ort not using the non_unique_new_dir field, since it'll
obviate its need entirely later with performance improvements
* adding a new path_in_way() function that uses opt->priv->paths
instead of doing an expensive tree_has_path() lookup to see if
a tree has a given path.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 19 Jan 2021 19:53:48 +0000 (19:53 +0000)]
merge-ort: implement check_for_directory_rename()
This is copied from merge-recursive.c, with minor tweaks due to using strmap
API and the fact that it can use opt->priv->paths to get all pathnames that
exist instead of taking a tree object.
This depends on a new function, handle_path_level_conflicts(), which
just has a placeholder die-not-yet-implemented implementation for now; a
subsequent patch will implement it.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 19 Jan 2021 19:53:46 +0000 (19:53 +0000)]
merge-ort: implement compute_collisions()
This is nearly a wholesale copy of compute_collisions() from
merge-recursive.c, and the logic remains the same, but it has been
tweaked slightly due to:
* using strmap.h API (instead of direct hashmaps)
* allocation/freeing of data structures were done separately in
merge_start() and clear_or_reinit_internal_opts() in an earlier
patch in this series
* there is no non_unique_new_dir data field in merge-ort; that will
be handled a different way
It does depend on two new functions, apply_dir_rename() and
check_dir_renamed() which were introduced with simple
die-not-yet-implemented shells and will be implemented in subsequent
patches.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 19 Jan 2021 19:53:45 +0000 (19:53 +0000)]
merge-ort: modify collect_renames() for directory rename handling
collect_renames() is similar to merge-recursive.c's get_renames(), but
lacks the directory rename handling found in the latter. Port that code
structure over to merge-ort. This introduces three new
die-not-yet-implemented functions that will be defined in future
commits.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is modelled on the version of handle_directory_level_conflicts()
from merge-recursive.c, but is massively simplified due to the following
factors:
* strmap API provides simplifications over using direct hashmap
* we have a dirs_removed field in struct rename_info that we have an
easy way to populate from collect_merge_info(); this was already
used in compute_rename_counts() and thus we do not need to check
for condition #2.
* The removal of condition #2 by handling it earlier in the code also
obviates the need to check for condition #3 -- if both sides renamed
a directory, meaning that the directory no longer exists on either
side, then neither side could have added any new files to that
directory, and thus there are no files whose locations we need to
move due to such a directory rename.
In fact, the same logic that makes condition #3 irrelevant means
condition #1 is also irrelevant so we could drop this function.
However, it is cheap to check if both sides rename the same directory,
and doing so can save future computation. So, simply remove any
directories that both sides renamed from the list of directory renames.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 19 Jan 2021 19:53:43 +0000 (19:53 +0000)]
merge-ort: implement compute_rename_counts()
This function is based on the first half of get_directory_renames() from
merge-recursive.c; as part of the implementation, factor out a routine,
increment_count(), to update the bookkeeping to track the number of
items renamed into new directories.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 19 Jan 2021 19:53:41 +0000 (19:53 +0000)]
merge-ort: add outline of get_provisional_directory_renames()
This function is based on merge-recursive.c's get_directory_renames(),
except that the first half has been split out into a not-yet-implemented
compute_rename_counts(). The primary difference here is our lack of the
non_unique_new_dir boolean in our strmap. The lack of that field will
at first cause us to fail testcase 2b of t6423; however, future
optimizations will obviate the need for that ugly field so we have just
left it out.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 19 Jan 2021 19:53:40 +0000 (19:53 +0000)]
merge-ort: add outline for computing directory renames
Port some directory rename handling changes from merge-recursive.c's
detect_and_process_renames() to the same-named function of merge-ort.c.
This does not yet add any use or handling of directory renames, just the
outline for where we start to compute them. Thus, a future patch will
add port additional changes to merge-ort's detect_and_process_renames().
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove diagnostics that haven't been emitted by "fsck" or its
predecessors for around 15 years. This documentation was added in c64b9b88605 (Reference documentation for the core git commands.,
2005-05-05), but was out-of-date quickly after that.
Notes on individual diagnostics:
- "expect dangling commits": Added in bcee6fd8e71 (Make 'fsck' able
to[...], 2005-04-13), documented in c64b9b88605. Not emitted since 1024932f019 (fsck-cache: walk the 'refs' directory[...],
2005-05-18).
- "missing sha1 directory": Added in 20222118ae4 (Add first cut at
"fsck-cache"[...], 2005-04-08), documented in c64b9b88605. Not
emitted since 230f13225df (Create object subdirectories on demand,
2005-10-08).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 20 Jan 2021 19:36:57 +0000 (11:36 -0800)]
Doc: clarify contents of packfile sent as URI
Clarify that, when the packfile-uri feature is used, the client should
not assume that the extra packfiles downloaded would only contain a
single blob, but support packfiles containing multiple objects of all
types.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 19 Jan 2021 12:52:04 +0000 (12:52 +0000)]
t7900: clean up some broken refs
The tests for the 'prefetch' task create remotes and fetch refs into
'refs/prefetch/<remote>/' and tags into 'refs/tags/'. These tests use
the remotes to create objects not intended to be seen by the "local"
repository.
In that sense, the incrmental-repack tasks did not have these objects
and refs in mind. That test replaces the object directory with a
specific pack-file layout for testing the batch-size logic. However,
this causes some operations to start showing warnings such as:
error: refs/prefetch/remote1/one does not point to a valid object!
error: refs/tags/one does not point to a valid object!
This only shows up if you run the tests verbosely and watch the output.
It caught my eye and I _thought_ that there was a bug where 'git gc' or
'git repack' wouldn't check 'refs/prefetch/' before pruning objects.
That is incorrect. Those commands do handle 'refs/prefetch/' correctly.
All that is left is to clean up the tests in t7900-maintenance.sh to
remove these tags and refs that are not being repacked for the
incremental-repack tests. Use update-ref to ensure this works with all
ref backends.
Helped-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 19 Jan 2021 12:52:03 +0000 (12:52 +0000)]
maintenance: set log.excludeDecoration durin prefetch
The 'prefetch' task fetches refs from all remotes and places them in the
refs/prefetch/<remote>/ refspace. As this task is intended to run in the
background, this allows users to keep their local data very close to the
remote servers' data while not updating the users' understanding of the
remote refs in refs/remotes/<remote>/.
However, this can clutter 'git log' decorations with copies of the refs
with the full name 'refs/prefetch/<remote>/<branch>'.
The log.excludeDecoration config option was added in a6be5e67 (log: add
log.excludeDecoration config option, 2020-05-16) for exactly this
purpose.
Ensure we set this only for users that would benefit from it by
assigning it at the beginning of the prefetch task. Other alternatives
would be during 'git maintenance register' or 'git maintenance start',
but those might assign the config even when the prefetch task is
disabled by existing config. Further, users could run 'git maintenance
run --task=prefetch' using their own scripting or scheduling. This
provides the best coverage to automatically update the config when
valuable.
It is improbable, but possible, that users might want to run the
prefetch task _and_ see these refs in their log decorations. This seems
incredibly unlikely to me, but users can always opt-in on a
command-by-command basis using --decorate-refs=refs/prefetch/.
Test that this works in a few cases. In particular, ensure that our
assignment of log.excludeDecoration=refs/prefetch/ is additive to other
existing exclusions. Further, ensure we do not add multiple copies in
multiple runs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Tue, 19 Jan 2021 07:40:56 +0000 (13:10 +0530)]
rebase -i: only write fixup-message when it's needed
The file "$GIT_DIR/rebase-merge/fixup-message" is only used for fixup
commands, there's no point in writing it for squash commands as it is
immediately deleted.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Charvi Mendiratta <charvi077@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Mon, 18 Jan 2021 23:49:11 +0000 (23:49 +0000)]
commit: ignore additional signatures when parsing signed commits
When we create a commit with multiple signatures, neither of these
signatures includes the other. Consequently, when we produce the
payload which has been signed so we can verify the commit, we must strip
off any other signatures, or the payload will differ from what was
signed. Do so, and in preparation for verifying with multiple
algorithms, pass the algorithm we want to verify into
parse_signed_commit.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Mon, 18 Jan 2021 23:49:10 +0000 (23:49 +0000)]
ref-filter: switch some uses of unsigned long to size_t
In the future, we'll want to pass some of the arguments of find_subpos
to strbuf_detach, which takes a size_t. This is fine on systems where
that's the same size as unsigned long, but that isn't the case on all
systems. Moreover, size_t makes sense since it's not possible to use a
buffer here that's larger than memory anyway.
Let's switch each use to size_t for these lengths in
grab_sub_body_contents and find_subpos.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abhishek Kumar [Sat, 16 Jan 2021 18:11:17 +0000 (18:11 +0000)]
commit-reach: use corrected commit dates in paint_down_to_common()
091f4cf (commit: don't use generation numbers if not needed,
2018-08-30) changed paint_down_to_common() to use commit dates instead
of generation numbers v1 (topological levels) as the performance
regressed on certain topologies. With generation number v2 (corrected
commit dates) implemented, we no longer have to rely on commit dates and
can use generation numbers.
For example, the command `git merge-base v4.8 v4.9` on the Linux
repository walks 167468 commits, taking 0.135s for committer date and
167496 commits, taking 0.157s for corrected committer date respectively.
While using corrected commit dates, Git walks nearly the same number of
commits as commit date, the process is slower as for each comparision we
have to access a commit-slab (for corrected committer date) instead of
accessing struct member (for committer date).
This change incidentally broke the fragile t6404-recursive-merge test.
t6404-recursive-merge sets up a unique repository where all commits have
the same committer date without a well-defined merge-base.
While running tests with GIT_TEST_COMMIT_GRAPH unset, we use committer
date as a heuristic in paint_down_to_common(). 6404.1 'combined merge
conflicts' merges commits in the order:
- Merge C with B to form an intermediate commit.
- Merge the intermediate commit with A.
With GIT_TEST_COMMIT_GRAPH=1, we write a commit-graph and subsequently
use the corrected committer date, which changes the order in which
commits are merged:
- Merge A with B to form an intermediate commit.
- Merge the intermediate commit with C.
While resulting repositories are equivalent, 6404.4 'virtual trees were
processed' fails with GIT_TEST_COMMIT_GRAPH=1 as we are selecting
different merge-bases and thus have different object ids for the
intermediate commits.
As this has already causes problems (as noted in 859fdc0 (commit-graph:
define GIT_TEST_COMMIT_GRAPH, 2018-08-29)), we disable commit graph
within t6404-recursive-merge.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abhishek Kumar [Sat, 16 Jan 2021 18:11:16 +0000 (18:11 +0000)]
commit-graph: use generation v2 only if entire chain does
Since there are released versions of Git that understand generation
numbers in the commit-graph's CDAT chunk but do not understand the GDAT
chunk, the following scenario is possible:
1. "New" Git writes a commit-graph with the GDAT chunk.
2. "Old" Git writes a split commit-graph on top without a GDAT chunk.
If each layer of split commit-graph is treated independently, as it was
the case before this commit, with Git inspecting only the current layer
for chunk_generation_data pointer, commits in the lower layer (one with
GDAT) whould have corrected commit date as their generation number,
while commits in the upper layer would have topological levels as their
generation. Corrected commit dates usually have much larger values than
topological levels. This means that if we take two commits, one from the
upper layer, and one reachable from it in the lower layer, then the
expectation that the generation of a parent is smaller than the
generation of a child would be violated.
It is difficult to expose this issue in a test. Since we _start_ with
artificially low generation numbers, any commit walk that prioritizes
generation numbers will walk all of the commits with high generation
number before walking the commits with low generation number. In all the
cases I tried, the commit-graph layers themselves "protect" any
incorrect behavior since none of the commits in the lower layer can
reach the commits in the upper layer.
This issue would manifest itself as a performance problem in this case,
especially with something like "git log --graph" since the low
generation numbers would cause the in-degree queue to walk all of the
commits in the lower layer before allowing the topo-order queue to write
anything to output (depending on the size of the upper layer).
Therefore, When writing the new layer in split commit-graph, we write a
GDAT chunk only if the topmost layer has a GDAT chunk. This guarantees
that if a layer has GDAT chunk, all lower layers must have a GDAT chunk
as well.
Rewriting layers follows similar approach: if the topmost layer below
the set of layers being rewritten (in the split commit-graph chain)
exists, and it does not contain GDAT chunk, then the result of rewrite
does not have GDAT chunks either.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abhishek Kumar [Sat, 16 Jan 2021 18:11:15 +0000 (18:11 +0000)]
commit-graph: implement generation data chunk
As discovered by Ævar, we cannot increment graph version to
distinguish between generation numbers v1 and v2 [1]. Thus, one of
pre-requistes before implementing generation number v2 was to
distinguish between graph versions in a backwards compatible manner.
We are going to introduce a new chunk called Generation DATa chunk (or
GDAT). GDAT will store corrected committer date offsets whereas CDAT
will still store topological level.
Old Git does not understand GDAT chunk and would ignore it, reading
topological levels from CDAT. New Git can parse GDAT and take advantage
of newer generation numbers, falling back to topological levels when
GDAT chunk is missing (as it would happen with a commit-graph written
by old Git).
We introduce a test environment variable 'GIT_TEST_COMMIT_GRAPH_NO_GDAT'
which forces commit-graph file to be written without generation data
chunk to emulate a commit-graph file written by old Git.
To minimize the space required to store corrrected commit date, Git
stores corrected commit date offsets into the commit-graph file, instea
of corrected commit dates. This saves us 4 bytes per commit, decreasing
the GDAT chunk size by half, but it's possible for the offset to
overflow the 4-bytes allocated for storage. As such overflows are and
should be exceedingly rare, we use the following overflow management
scheme:
We introduce a new commit-graph chunk, Generation Data OVerflow ('GDOV')
to store corrected commit dates for commits with offsets greater than
GENERATION_NUMBER_V2_OFFSET_MAX.
If the offset is greater than GENERATION_NUMBER_V2_OFFSET_MAX, we set
the MSB of the offset and the other bits store the position of corrected
commit date in GDOV chunk, similar to how Extra Edge List is maintained.
We test the overflow-related code with the following repo history:
F - N - U
/ \
U - N - U N
\ /
N - F - N
Where the commits denoted by U have committer date of zero seconds
since Unix epoch, the commits denoted by N have committer date of 1112354055 (default committer date for the test suite) seconds since
Unix epoch and the commits denoted by F have committer date of
(2 ^ 31 - 2) seconds since Unix epoch.
The largest offset observed is 2 ^ 31, just large enough to overflow.
Abhishek Kumar [Sat, 16 Jan 2021 18:11:14 +0000 (18:11 +0000)]
commit-graph: implement corrected commit date
With most of preparations done, let's implement corrected commit date.
The corrected commit date for a commit is defined as:
* A commit with no parents (a root commit) has corrected commit date
equal to its committer date.
* A commit with at least one parent has corrected commit date equal to
the maximum of its commit date and one more than the largest corrected
commit date among its parents.
As a special case, a root commit with timestamp of zero (01.01.1970
00:00:00Z) has corrected commit date of one, to be able to distinguish
from GENERATION_NUMBER_ZERO (that is, an uncomputed corrected commit
date).
To minimize the space required to store corrected commit date, Git
stores corrected commit date offsets into the commit-graph file. The
corrected commit date offset for a commit is defined as the difference
between its corrected commit date and actual commit date.
Storing corrected commit date requires sizeof(timestamp_t) bytes, which
in most cases is 64 bits (uintmax_t). However, corrected commit date
offsets can be safely stored using only 32-bits. This halves the size
of GDAT chunk, which is a reduction of around 6% in the size of
commit-graph file.
However, using offsets be problematic if a commit is malformed but valid
and has committer date of 0 Unix time, as the offset would be the same
as corrected commit date and thus require 64-bits to be stored properly.
While Git does not write out offsets at this stage, Git stores the
corrected commit dates in member generation of struct commit_graph_data.
It will begin writing commit date offsets with the introduction of
generation data chunk.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abhishek Kumar [Sat, 16 Jan 2021 18:11:13 +0000 (18:11 +0000)]
commit-graph: return 64-bit generation number
In a preparatory step for introducing corrected commit dates, let's
return timestamp_t values from commit_graph_generation(), use
timestamp_t for local variables and define GENERATION_NUMBER_INFINITY
as (2 ^ 63 - 1) instead.
We rename GENERATION_NUMBER_MAX to GENERATION_NUMBER_V1_MAX to
represent the largest topological level we can store in the commit data
chunk.
With corrected commit dates implemented, we will have two such *_MAX
variables to denote the largest offset and largest topological level
that can be stored.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abhishek Kumar [Sat, 16 Jan 2021 18:11:12 +0000 (18:11 +0000)]
commit-graph: add a slab to store topological levels
In a later commit we will introduce corrected commit date as the
generation number v2. Corrected commit dates will be stored in the new
seperate Generation Data chunk. However, to ensure backwards
compatibility with "Old" Git we need to continue to write generation
number v1 (topological levels) to the commit data chunk. Thus, we need
to compute and store both versions of generation numbers to write the
commit-graph file.
Therefore, let's introduce a commit-slab `topo_level_slab` to store
topological levels; corrected commit date will be stored in the member
`generation` of struct commit_graph_data.
The macros `GENERATION_NUMBER_INFINITY` and `GENERATION_NUMBER_ZERO`
mark commits not in the commit-graph file and commits written by a
version of Git that did not compute generation numbers respectively.
Generation numbers are computed identically for both kinds of commits.
A "slab-miss" should return `GENERATION_NUMBER_INFINITY` as the commit
is not in the commit-graph file. However, since the slab is
zero-initialized, it returns 0 (or rather `GENERATION_NUMBER_ZERO`).
Thus, we no longer need to check if the topological level of a commit is
`GENERATION_NUMBER_INFINITY`.
We will add a pointer to the slab in `struct write_commit_graph_context`
and `struct commit_graph` to populate the slab in
`fill_commit_graph_info` if the commit has a pre-computed topological
level as in case of split commit-graphs.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abhishek Kumar [Sat, 16 Jan 2021 18:11:11 +0000 (18:11 +0000)]
t6600-test-reach: generalize *_three_modes
In a preparatory step to implement generation number v2, we add tests to
ensure Git can read and parse commit-graph files without Generation Data
chunk. These files represent commit-graph files written by Old Git and
are neccesary for backward compatability.
We extend run_three_modes() and test_three_modes() to *_all_modes() with
the fourth mode being "commit-graph without generation data chunk".
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abhishek Kumar [Sat, 16 Jan 2021 18:11:10 +0000 (18:11 +0000)]
commit-graph: consolidate fill_commit_graph_info
Both fill_commit_graph_info() and fill_commit_in_graph() parse
information present in commit data chunk. Let's simplify the
implementation by calling fill_commit_graph_info() within
fill_commit_in_graph().
fill_commit_graph_info() used to not load committer data from commit data
chunk. However, with the upcoming switch to using corrected committer
date as generation number v2, we will have to load committer date to
compute generation number value anyway.
e51217e15 (t5000: test tar files that overflow ustar headers,
30-06-2016) introduced a test 'generate tar with future mtime' that
creates a commit with committer date of (2^36 + 1) seconds since
EPOCH. The CDAT chunk provides 34-bits for storing committer date, thus
committer time overflows into generation number (within CDAT chunk) and
has undefined behavior.
The test used to pass as fill_commit_graph_info() would not set struct
member `date` of struct commit and load committer date from the object
database, generating a tar file with the expected mtime.
However, with corrected commit date, we will load the committer date
from CDAT chunk (truncated to lower 34-bits to populate the generation
number. Thus, Git sets date and generates tar file with the truncated
mtime.
The ustar format (the header format used by most modern tar programs)
only has room for 11 (or 12, depending on some implementations) octal
digits for the size and mtime of each file.
As the CDAT chunk is overflow by 12-octal digits but not 11-octal
digits, we split the existing tests to test both implementations
separately and add a new explicit test for 11-digit implementation.
To test the 11-octal digit implementation, we create a future commit
with committer date of 2^34 - 1, which overflows 11-octal digits without
overflowing 34-bits of the Commit Date chunks.
To test the 12-octal digit implementation, the smallest committer date
possible is 2^36 + 1, which overflows the CDAT chunk and thus
commit-graph must be disabled for the test.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abhishek Kumar [Sat, 16 Jan 2021 18:11:09 +0000 (18:11 +0000)]
revision: parse parent in indegree_walk_step()
In indegree_walk_step(), we add unvisited parents to the indegree queue.
However, parents are not guaranteed to be parsed. As the indegree queue
sorts by generation number, let's parse parents before inserting them to
ensure the correct priority order.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abhishek Kumar [Sat, 16 Jan 2021 18:11:08 +0000 (18:11 +0000)]
commit-graph: fix regression when computing Bloom filters
Before computing Bloom filters, the commit-graph machinery uses
commit_gen_cmp to sort commits by generation order for improved diff
performance. 3d11275505 (commit-graph: examine commits by generation
number, 2020-03-30) claims that this sort can reduce the time spent to
compute Bloom filters by nearly half.
But since c49c82aa4c (commit: move members graph_pos, generation to a
slab, 2020-06-17), this optimization is broken, since asking for a
'commit_graph_generation()' directly returns GENERATION_NUMBER_INFINITY
while writing.
Not all hope is lost, though: 'commit_gen_cmp()' falls back to
comparing commits by their date when they have equal generation number,
and so since c49c82aa4c is purely a date comparison function. This
heuristic is good enough that we don't seem to loose appreciable
performance while computing Bloom filters.
Applying this patch (compared with v2.30.0) speeds up computing Bloom
filters by factors ranging from 0.40% to 5.19% on various repositories [1].
So, avoid the useless 'commit_graph_generation()' while writing by
instead accessing the slab directly. This returns the newly-computed
generation numbers, and allows us to avoid the heuristic by directly
comparing generation numbers.
Derrick Stolee [Thu, 7 Jan 2021 16:32:11 +0000 (16:32 +0000)]
cache-tree: speed up consecutive path comparisons
The previous change reduced time spent in strlen() while comparing
consecutive paths in verify_cache(), but we can do better. The
conditional checks the existence of a directory separator at the correct
location, but only after doing a string comparison. Swap the order to be
logically equivalent but perform fewer string comparisons.
To test the effect on performance, I used a repository with over three
million paths in the index. I then ran the following command on repeat:
Derrick Stolee [Thu, 7 Jan 2021 16:32:09 +0000 (16:32 +0000)]
index-format: discuss recursion of cache-tree better
The end of the cache tree index extension format trails off with
ellipses ever since 23fcc98 (doc: technical details about the index
file format, 2011-03-01). While an intuitive reader could gather what
this means, it could be better to use "and so on" instead.
Really, this is only justified because I also wanted to point out that
the number of subtrees in the index format is used to determine when the
recursive depth-first-search stack should be "popped." This should help
to add clarity to the format.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 7 Jan 2021 16:32:08 +0000 (16:32 +0000)]
index-format: update preamble to cache tree extension
I had difficulty in my efforts to learn about the cache tree extension
based on the documentation and code because I had an incorrect
assumption about how it behaved. This might be due to some ambiguity in
the documentation, so this change modifies the beginning of the cache
tree format by expanding the description of the feature.
My hope is that this documentation clarifies a few things:
1. There is an in-memory recursive tree structure that is constructed
from the extension data. This structure has a few differences, such
as where the name is stored.
2. What does it mean for an entry to be invalid?
3. When exactly are "new" trees created?
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 7 Jan 2021 16:32:07 +0000 (16:32 +0000)]
index-format: use 'cache tree' over 'cached tree'
The index has a "cache tree" extension. This corresponds to a
significant API implemented in cache-tree.[ch]. However, there are a few
places that refer to this erroneously as "cached tree". These are rare,
but notably the index-format.txt file itself makes this error.
The only other reference is in t7104-reset-hard.sh.
Reported-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 4 Jan 2021 03:09:14 +0000 (03:09 +0000)]
cache-tree: trace regions for prime_cache_tree
Commands such as "git reset --hard" rebuild the in-memory representation
of the cache tree index extension by parsing tree objects starting at a
known root tree. The performance of this operation can vary widely
depending on the width and depth of the repository's working directory
structure. Measure the time in this operation using trace2 regions in
prime_cache_tree().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 4 Jan 2021 03:09:13 +0000 (03:09 +0000)]
cache-tree: trace regions for I/O
As we write or read the cache tree index extension, it can be good to
isolate how much of the file I/O time is spent constructing this
in-memory tree from the existing index or writing it out again to the
new index file. Use trace2 regions to indicate that we are spending time
on this operation.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 16 Jan 2021 05:48:45 +0000 (21:48 -0800)]
Merge branch 'mt/t4129-with-setgid-dir'
Some tests expect that "ls -l" output has either '-' or 'x' for
group executable bit, but setgid bit can be inherited from parent
directory and make these fields 'S' or 's' instead, causing test
failures.
* mt/t4129-with-setgid-dir:
t4129: don't fail if setgid is set in the test directory
Junio C Hamano [Sat, 16 Jan 2021 05:48:45 +0000 (21:48 -0800)]
Merge branch 'ds/maintenance-part-4'
Follow-up on the "maintenance part-3" which introduced scheduled
maintenance tasks to support platforms whose native scheduling
methods are not 'cron'.
* ds/maintenance-part-4:
maintenance: use Windows scheduled tasks
maintenance: use launchctl on macOS
maintenance: include 'cron' details in docs
maintenance: extract platform-specific scheduling
projects / thirdparty / git.git / log
