Jiang Xin [Wed, 11 Nov 2020 11:32:00 +0000 (19:32 +0800)]
t5411: new helper filter_out_user_friendly_and_stable_output
New helper `filter_out_user_friendly_and_stable_output` will call
common helpr function `make_user_friendly_and_stable_output` and use
additional arguments to filter out messages for specific test cases.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.mak.uname: remove unused NEEDS_SSL_WITH_CURL flag
The NEEDS_SSL_WITH_CURL flag was still being set in one case, but
hasn't existed since 23c4bbe28e6 ("build: link with curl-defined
linker flags", 2018-11-03). Remove it, and a comment which referred to
it. See 6c109904bc8 ("Port to HP NonStop", 2012-09-19) for the initial
addition of the comment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.mak.uname: remove unused the NO_R_TO_GCC_LINKER flag
The NO_R_TO_GCC_LINKER flag was still being on some platforms. It
hasn't been used since my 0f50c8e32c8 ("Makefile: remove the
NO_R_TO_GCC_LINKER flag", 2019-05-17).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Daniel Gurney [Wed, 11 Nov 2020 08:32:27 +0000 (10:32 +0200)]
compat/bswap.h: don't assume MSVC is little-endian
In 1af265f0 (compat/bswap.h: simplify MSVC endianness
detection, 2020-11-08) we attempted to simplify code by assuming MSVC
builds will be for little-endian machines, since only unusably old
versions of MSVC supported big-endian MIPS and m68k architectures.
However, it's possible that MSVC could be ported to build for a
big-endian architecture again, so the simplification wasn't as
future-proof as hoped.
So let's go back to the old way of detecting MSVC, and then checking
architecture from a list of little-endian architecture macros.
Note that MSVC does not treat ARM64 as bi-endian, so we can safely treat
it as little-endian.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Helped-by: Jeff King <peff@peff.net> Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Daniel Gurney <dgurney99@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jinoh Kang [Fri, 6 Nov 2020 17:14:52 +0000 (17:14 +0000)]
t7800: simplify difftool test
The new test added by the previous commit can be simplified a lot.
Let's do so.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jinoh Kang <luke1337@theori.io> Signed-off-by: Junio C Hamano <gitster@pobox.com>
add -i (built-in): use correct names to load color.diff.* config
The builtin version of add-interactive mistakenly loads diff colors from
color.interactive.* instead of color.diff.*. It also accidentally spells
`frag` as `fraginfo`.
Let's fix that.
Note also that we don't respect the historical `diff.color.*`. The perl
version never did, and those have been deprecated since 2007.
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com> Co-authored-by: Jeff King <peff@peff.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
add -i (built-in): prevent the `reset` "color" from being configured
The Perl version of that command sneakily uses `git config --get-color`
to figure out the ANSI sequence to reset the color, but passes the empty
string and therefore cannot actually match any config entry.
This was missed when re-implementing the command as a built-in command.
Let's fix this, preventing the `reset` sequence from being overridden
via the config.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In libxdiff, imitating GNU diff, the hunk headers only show the line
count if it is different from 1. When splitting hunks, the Perl version
of `git add -p` already imitates this. Let's do the same in the built-in
version of said command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Perl version of that command already does that since a301973641f
(add -p: print errors in separate color, 2009-02-05). The built-in
version's development started by reimplementing the initial version from 5cde71d64af (git-add --interactive, 2006-12-10) for simplicity, though,
which still printed error messages to stdout.
Let's fix that by imitating the Perl version's behavior in the built-in
version of that command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
add -i (built-in): do show an error message for incorrect inputs
There is a neat feature in `git add -i` where it allows users to select
items via unique prefixes.
In the built-in version of `git add -i`, we specifically sort the items
(unless they are already sorted) and then perform a binary search to
figure out whether the input constitutes a unique prefix. Unfortunately,
by mistake this code misidentifies matches even if the input string is
not actually a prefix of any item.
For example, in the initial menu, where there is a `status` and an
`update` command, the input `tadaa` was mistaken as a prefix of
`update`.
Let's fix this by looking a bit closer whether the input is actually a
prefix of the item at the found insert index.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 10 Nov 2020 21:40:19 +0000 (16:40 -0500)]
rev-parse: handle --end-of-options
We taught rev-list a new way to separate options from revisions in 19e8789b23 (revision: allow --end-of-options to end option parsing,
2019-08-06), but rev-parse uses its own parser. It should know about
--end-of-options not only for consistency, but because it may be
presented with similarly ambiguous cases. E.g., if a caller does:
git rev-parse "$rev" -- "$path"
to parse an untrusted input, then it will get confused if $rev contains
an option-like string like "--local-env-vars". Or even "--not-real",
which we'd keep as an option to pass along to rev-list.
Or even more importantly:
git rev-parse --verify "$rev"
can be confused by options, even though its purpose is safely parsing
untrusted input. On the plus side, it will always fail the --verify
part, as it will not have parsed a revision, so the caller will
generally "fail closed" rather than continue to use the untrusted
string. But it will still trigger whatever option was in "$rev"; this
should be mostly harmless, since rev-parse options are all read-only,
but I didn't carefully audit all paths.
This patch lets callers write:
git rev-parse --end-of-options "$rev" -- "$path"
and:
git rev-parse --verify --end-of-options "$rev"
which will both treat "$rev" always as a revision parameter. The latter
is a bit clunky. It would be nicer if we had defined "--verify" to
require that its next argument be the revision. But we have not
historically done so, and:
git rev-parse --verify -q "$rev"
does currently work. I added a test here to confirm that we didn't break
that.
A few implementation notes:
- We don't document --end-of-options explicitly in commands, but rather
in gitcli(7). So I didn't give it its own section in git-rev-parse(1).
But I did call it out specifically in the --verify section, and
include it in the examples, which should show best practices.
- We don't have to re-indent the main option-parsing block, because we
can combine our "did we see end of options" check with "does it start
with a dash". The exception is the pre-setup options, which need
their own block.
- We do however have to pull the "--" parsing out of the "does it start
with dash" block, because we want to parse it even if we've seen
--end-of-options.
- We'll leave "--end-of-options" in the output. This is probably not
technically necessary, as a careful caller will do:
git rev-parse --end-of-options $revs -- $paths
and anything in $revs will be resolved to an object id. However, it
does help a slightly less careful caller like:
git rev-parse --end-of-options $revs_or_paths
where a path "--foo" will remain in the output as long as it also
exists on disk. In that case, it's helpful to retain --end-of-options
to get passed along to rev-list, s it would otherwise see just
"--foo".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 10 Nov 2020 21:38:03 +0000 (16:38 -0500)]
rev-parse: put all options under the "-" check
The option-parsing loop of rev-parse checks whether the first character
of an arg is "-". If so, then it enters a series of conditionals
checking for individual options. But some options are inexplicably
outside of that outer conditional.
This doesn't produce the wrong behavior; the conditional is actually
redundant with the individual option checks, and it's really only its
fallback "continue" that we care about. But we should at least be
consistent.
One obvious alternative is that we could get rid of the conditional
entirely. But we'll be using the extra block it provides in the next
patch.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 10 Nov 2020 21:37:27 +0000 (16:37 -0500)]
rev-parse: don't accept options after dashdash
Because of the order in which we check options in rev-parse, there are a
few options we accept even after a "--". This is wrong, because the
whole point of "--" is to say "everything after here is a path". Let's
move the "did we see a dashdash" check (it's called "as_is" in the code)
to the top of the parsing loop.
Note there is one subtlety here. The options are ordered so that some
are checked before we even see if we're in a repository (they continue
the loop, and if we get past a certain point, then we do the repository
setup). By moving the as_is check higher, it's also in that "before
setup" section, even though it might look at the repository via
verify_filename(). However, this works out: we'd never set as_is until
we parse "--", and we don't parse that until after doing the setup.
An alternative here to avoid the subtlety is to put the as_is check at
the top of the post-setup options. But then every pre-setup option would
have to remember to check "if (!as_is && !strcmp(...))". So while this
is a bit magical, it's harder for future code to get wrong.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 610e2b9240 (blame: validate and peel the object names on the
ignore list, 2020-09-24) git blame reports checks if objects specified
with --ignore-rev and in files loaded with --ignore-revs-file and config
option blame.ignoreRevsFile are actual objects and dies if they aren't.
The intent is to report typos to the user.
This also breaks the ability to use a single ignore file for multiple
repositories. Typos are presumably less likely in files than on the
command line, so alerting is less useful here. Restore that feature by
skipping non-commits without dying.
Reported-by: Jean-Yves Avenard <jyavenard@mozilla.com> Signed-off-by: René Scharfe <l.s.r@web.de> Reviewed-by: Barret Rhoden <brho@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 6 Nov 2020 21:56:24 +0000 (13:56 -0800)]
format-patch: make output filename configurable
For the past 15 years, we've used the hardcoded 64 as the length
limit of the filename of the output from the "git format-patch"
command. Since the value is shorter than the 80-column terminal, it
could grow without line wrapping a bit. At the same time, since the
value is longer than half of the 80-column terminal, we could fit
two or more of them in "ls" output on such a terminal if we allowed
to lower it.
Introduce a new command line option --filename-max-length=<n> and a
new configuration variable format.filenameMaxLength to override the
hardcoded default.
While we are at it, remove a check that the name of output directory
does not exceed PATH_MAX---this check is pointless in that by the
time control reaches the function, the caller would already have
done an equivalent of "mkdir -p", so if the system does not like an
overly long directory name, the control wouldn't have reached here,
and otherwise, we know that the system allowed the output directory
to exist. In the worst case, we will get an error when we try to
open the output file and handle the error correctly anyway.
Prepare a test script to transition of the default branch name to
'main'.
* js/default-branch-name-adjust-t5411:
t5411: finish preparing for `main` being the default branch name
t5411: adjust the remaining support files for init.defaultBranch=main
t5411: start adjusting the support files for init.defaultBranch=main
t5411: start using the default branch name "main"
Junio C Hamano [Mon, 9 Nov 2020 22:06:26 +0000 (14:06 -0800)]
Merge branch 'pb/ref-filter-with-crlf'
A commit and tag object may have CR at the end of each and
every line (you can create such an object with hash-object or
using --cleanup=verbatim to decline the default clean-up
action), but it would make it impossible to have a blank line
to separate the title from the body of the message. Be lenient
and accept a line with lone CR on it as a blank line, too.
* pb/ref-filter-with-crlf:
log, show: add tests for messages containing CRLF
ref-filter: handle CRLF at end-of-line more gracefully
Junio C Hamano [Mon, 9 Nov 2020 22:06:25 +0000 (14:06 -0800)]
Merge branch 'nk/diff-files-vs-fsmonitor'
"git diff" and other commands that share the same machinery to
compare with working tree files have been taught to take advantage
of the fsmonitor data when available.
* nk/diff-files-vs-fsmonitor:
p7519-fsmonitor: add a git add benchmark
p7519-fsmonitor: refactor to avoid code duplication
perf lint: add make test-lint to perf tests
t/perf: add fsmonitor perf test for git diff
t/perf/p7519-fsmonitor.sh: warm cache on first git status
t/perf/README: elaborate on output format
fsmonitor: use fsmonitor data in `git diff`
Junio C Hamano [Mon, 9 Nov 2020 22:06:25 +0000 (14:06 -0800)]
Merge branch 'en/dir-rename-tests'
More preliminary tests have been added to document desired outcome
of various "directory rename" situations.
* en/dir-rename-tests:
t6423: more involved rules for renaming directories into each other
t6423: update directory rename detection tests with new rule
t6423: more involved directory rename test
directory-rename-detection.txt: update references to regression tests
This patch will let the new `check-whitespace` GitHub workflow be happy
with the upcoming patch series that wants to search-and-replace `master`
with `main` in t9603 and some other test scripts.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two blocks in t5570 want to align the closing double quotes, padding
with spaces if needed. Since the maximum length of those lines is
defined by the branch name `master`, the upcoming rename to `main` would
unalign the quotes.
But then, it is unclear how those aligned closing quotes should help
readability anyway, so let's just remove that padding altogether.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5400,t5402: consistently indent with tabs, not with spaces
This patch actually prepares for the upcoming patches to replace
`master` with `main` in these tests: we do not want those changes to be
flagged by the new `check-whitespace` GitHub workflow (even if those
changes do not introduce the whitespace issues, they touch lines
affected by those issues without fixing them).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b6211b89eb3 (tests: avoid variations of the `master` branch name,
2020-09-26), the `master[123]` branch names were renamed to
`topic_[123]`. A non-literal mention of the corresponding files was
missed in that commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message in question reads awkward with the name "master", but will
be even more confusing once that is renamed to "main". Let's adjust it
in advance of said rename.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modern MSVC or Windows versions don't support big-endian, so it's
unnecessary to consider architectures when using it.
This also makes ARM64 MSVC builds succeed.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Daniel Gurney <dgurney99@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Mon, 9 Nov 2020 16:05:31 +0000 (17:05 +0100)]
archive: support compression levels beyond 9
Compression programs like zip, gzip, bzip2 and xz allow to adjust the
trade-off between CPU cost and size gain with numerical options from -1
for fast compression and -9 for high compression ratio. zip also
accepts -0 for storing files verbatim. git archive directly support
these single-digit compression levels for ZIP output and passes them to
filters like gzip.
Zstandard additionally supports compression level options -10 to -19, or
up to -22 with --ultra. This *seems* to work with git archive in most
cases, e.g. it will produce an archive with -19 without complaining, but
since it only supports single-digit compression level options this is
the same as -1 -9 and thus -9.
Allow git archive to accept multi-digit compression levels to support
the full range supported by zstd. Explicitly reject them for the ZIP
format, as otherwise deflateInit2() would just fail with a somewhat
cryptic "stream consistency error".
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ci: avoid using the deprecated `set-env` construct
The `set-env` construct was deprecated as of the announcement in
https://github.blog/changelog/2020-10-01-github-actions-deprecating-set-env-and-add-path-commands/
Let's use the recommended alternative instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: consolidate the `file_size` function into `test-lib-functions.sh`
In 8de7eeb54b6 (compression: unify pack.compression configuration
parsing, 2016-11-15), we introduced identical copies of the `file_size`
helper into three test scripts, with the plan to eventually consolidate
them into a single copy.
Let's do that, and adjust the function name to adhere to the `test_*`
naming convention.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jinoh Kang [Fri, 6 Nov 2020 17:14:52 +0000 (17:14 +0000)]
diff: allow passing NULL to diff_free_filespec_data()
Commit 3aef54e8b8 ("diff: munmap() file contents before running external
diff") introduced calls to diff_free_filespec_data in
run_external_diff, which may pass NULL pointers.
Fix this and prevent any such bugs in the future by making
`diff_free_filespec_data(NULL)` a no-op.
Fixes: 3aef54e8b8 ("diff: munmap() file contents before running external diff") Signed-off-by: Jinoh Kang <luke1337@theori.io> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Fri, 6 Nov 2020 00:24:54 +0000 (00:24 +0000)]
strmap: add a strset sub-type
Similar to adding strintmap for special-casing a string -> int mapping,
add a strset type for cases where we really are only interested in using
strmap for storing a set rather than a mapping. In this case, we'll
always just store NULL for the value but the different struct type makes
it clearer than code comments how a variable is intended to be used.
The difference in usage also results in some differences in API: a few
things that aren't necessary or meaningful are dropped (namely, the
free_values argument to *_clear(), and the *_get() function), and
strset_add() is chosen as the API instead of strset_put().
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Thu, 5 Nov 2020 00:22:41 +0000 (00:22 +0000)]
strmap: add functions facilitating use as a string->int map
Although strmap could be used as a string->int map, one either had to
allocate an int for every entry and then deallocate later, or one had to
do a bunch of casting between (void*) and (intptr_t).
Add some special functions that do the casting. Also, rename put->set
for such wrapper functions since 'put' implied there may be some
deallocation needed if the string was already found in the map, which
isn't the case when we're storing an int value directly in the void*
slot instead of using the void* slot as a pointer to data.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Thu, 5 Nov 2020 00:22:40 +0000 (00:22 +0000)]
strmap: enable faster clearing and reusing of strmaps
When strmaps are used heavily, such as is done by my new merge-ort
algorithm, and strmaps need to be cleared but then re-used (because of
e.g. picking multiple commits to cherry-pick, or due to a recursive
merge having several different merges while recursing), free-ing and
reallocating map->table repeatedly can add up in time, especially since
it will likely be reallocated to a much smaller size but the previous
merge provides a good guide to the right size to use for the next merge.
Introduce strmap_partial_clear() to take advantage of this type of
situation; it will act similar to strmap_clear() except that
map->table's entries are zeroed instead of map->table being free'd.
Making use of this function reduced the cost of
clear_or_reinit_internal_opts() by about 20% in mert-ort, and dropped
the overall runtime of my rebase testcase by just under 2%.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Thu, 5 Nov 2020 00:22:39 +0000 (00:22 +0000)]
strmap: add more utility functions
This adds a number of additional convienence functions I want/need:
* strmap_get_size()
* strmap_empty()
* strmap_remove()
* strmap_for_each_entry()
* strmap_get_entry()
I suspect the first four are self-explanatory.
strmap_get_entry() is similar to strmap_get() except that instead of just
returning the void* value that the string maps to, it returns the
strmap_entry that contains both the string and the void* value (or
NULL if the string isn't in the map). This is helpful because it avoids
multiple lookups, e.g. in some cases a caller would need to call:
* strmap_contains() to check that the map has an entry for the string
* strmap_get() to get the void* value
* <do some work to update the value>
* strmap_put() to update/overwrite the value
If the void* pointer returned really is a pointer, then the last step is
unnecessary, but if the void* pointer is just cast to an integer then
strmap_put() will be needed. In contrast, one can call strmap_get_entry()
and then:
* check if the string was in the map by whether the pointer is NULL
* access the value via entry->value
* directly update entry->value
meaning that we can replace two or three hash table lookups with one.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Wed, 4 Nov 2020 15:29:40 +0000 (15:29 +0000)]
rebase -i: simplify get_revision_ranges()
Now that all the external users of head_hash have been converted to
use a opts->orig_head instead we can stop returning head_hash from
get_revision_ranges().
Because we want to pass the full object names back to the caller in
`revisions` the find_unique_abbrev_r() call that was used to initialize
`head_hash` is replaced with oid_to_hex().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Wed, 4 Nov 2020 15:29:38 +0000 (15:29 +0000)]
rebase -i: use struct object_id rather than looking up commit
We already have a struct object_id containing the oid that we want to
set ORIG_HEAD to so use that rather than converting it to a string and
then calling get_oid() on that string.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Wed, 4 Nov 2020 15:29:37 +0000 (15:29 +0000)]
rebase -i: stop overwriting ORIG_HEAD buffer
After rebasing, ORIG_HEAD is supposed to point to the old HEAD of the
rebased branch. The code used find_unique_abbrev() to obtain the
object name of the old HEAD and wrote to both
.git/rebase-merge/orig-head (used by `rebase --abort` to go back to
the previous state) and to ORIG_HEAD. The buffer find_unique_abbrev()
gives back is volatile, unfortunately, and was overwritten after the
former file is written but before ORIG_FILE is written, leaving an
incorrect object name in it.
Avoid relying on the volatile buffer of find_unique_abbrev(), and
instead supply our own buffer to keep the object name.
I think that all of the users of head_hash should actually be using
opts->orig_head instead as passing a string rather than a struct
object_id around is a hang over from the scripted implementation. This
patch just fixes the immediate bug and adds a regression test based on
Caspar's reproduction example[1]. The users will be converted to use
struct object_id and head_hash removed in the next few commits.
Jeff King [Wed, 4 Nov 2020 19:28:36 +0000 (14:28 -0500)]
format-patch: support --output option
We've never intended to support diff's --output option in format-patch.
And until baa4adc66a (parse-options: disable option abbreviation with
PARSE_OPT_KEEP_UNKNOWN, 2019-01-27), it was impossible to trigger. We
first parse the format-patch options before handing the remainder off to
setup_revisions(). Before that commit, we'd accept "--output=foo" as an
abbreviation for "--output-directory=foo". But afterwards, we don't
check abbreviations, and --output gets passed to the diff code.
This results in nonsense behavior and bugs. The diff code will have
opened a filehandle at rev.diffopt.file, but we'll overwrite that with
our own handles that we open for each individual patch file. So the
--output file will always just be empty. But worse, the diff code also
sets rev.diffopt.close_file, so log_tree_commit() will close the
filehandle itself. And then the main loop in cmd_format_patch() will try
to close it again, resulting in a double-free.
The simplest solution would be to just disallow --output with
format-patch, as nobody ever intended it to work. However, we have
accidentally documented it (because format-patch includes diff-options).
And it does work with "git log", which writes the whole output to the
specified file. It's easy enough to make that work for format-patch,
too: it's really the same as --stdout, but pointed at a specific file.
We can detect the use of the --output option by the "close_file" flag
(note that we can't use rev.diffopt.file, since the diff setup will
otherwise set it to stdout). So we just need to unset that flag, but
don't have to do anything else. Our situation is otherwise exactly like
--stdout (note that we don't fclose() the file, but nor does the stdout
case; exiting the program takes care of that for us).
Reported-by: Johannes Postler <johannes.postler@txture.io> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 4 Nov 2020 19:28:34 +0000 (14:28 -0500)]
format-patch: tie file-opening logic to output_directory
In format-patch we're either outputting to stdout or to individual files
in an output directory (which may be just "./"). Our logic for whether
to open a new file for each patch is checked with "!use_stdout", but it
is equally correct to check for a non-NULL output_directory.
The distinction will matter when we add a new single-stream output in a
future patch, when only one of the three methods will want individual
files. Let's swap the logic here in preparation.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 4 Nov 2020 19:28:31 +0000 (14:28 -0500)]
format-patch: refactor output selection
The --stdout and --output-directory options are mutually exclusive, but
it's hard to tell from reading the code. We have three separate
conditionals that check for use_stdout, and it's only after we've set up
the output_directory fully that we check whether the user also specified
--stdout.
Instead, let's check the exclusion explicitly first, then have a single
conditional that handles stdout versus an output directory. This is
slightly easier to follow now, and also will keep things sane when we
add another output mode in a future patch.
We'll add a few tests as well, covering the mutual exclusion and the
fact that we are not confused by a configured output directory.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 4 Nov 2020 22:01:37 +0000 (14:01 -0800)]
doc: clarify that --abbrev=<n> is about the minimum length
Early text written in 2006 explains the "--abbrev=<n>" option to
"show only a partial prefix", without saying that the length of the
partial prefix is not necessarily the number given to the option to
ensure that the output names the object uniquely.
Update documentation for the diff family of commands, "blame",
"branch --verbose", "ls-files" and "ls-tree" to stress that the
short prefix must uniquely refer to an object, and <n> is merely
the mininum number of hexdigits used in the prefix.
Helped-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 4 Nov 2020 17:54:01 +0000 (09:54 -0800)]
log: diagnose -L used with pathspec as an error
The -L option is documented to accept no pathspec, but the
command line option parser has allowed the combination without
checking so far. Ensure that there is no pathspec when the -L
option is in effect to fix this.
Incidentally, this change fixes another bug in the command line
option parser, which has allowed the -L option used together
with the --follow option. Because the latter requires exactly
one path given, but the former takes no pathspec, they become
mutually incompatible automatically. Because the -L option
follows renames on its own, there is no reason to give --follow
at the same time.
The new tests say they may fail with "-L and --follow being
incompatible" instead of "-L and pathspec being incompatible".
Currently the expected failure can come only from the latter, but
this is to futureproof them, in case we decide to add code to
explicititly die on -L and --follow used together.
Heled-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 32c83afc2c69 (ci: github action - add check for whitespace errors,
2020-09-22), we introduced a GitHub workflow that automatically checks
Pull Requests for whitespace problems.
However, when affected lines contain one or more double quote
characters, this workflow failed to attach the informative comment
because the Javascript snippet incorrectly interpreted these quotes
instead of using the `git log` output as-is.
Let's fix that.
While at it, let's `await` the result of the `createComment()` function.
Finally, we enclose the log in the comment with ```...``` to avoid
having the diff marker be misinterpreted as an enumeration bullet.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c57b3367bed (worktree: teach `list` to annotate locked worktree,
2020-10-11), we introduced a test case that wanted to talk about
"worktrees" but talked about "worktress" instead. Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5515: use `main` as the name of the main branch for testing (conclusion)
In the previous three commits, We prepared the `t5515` script and the
files in `t/t5515/` for the upcoming change of the default branch name
to `main`. The changes were made over the course of three commits
because the overall patch would have been too big to send to the Git
mailing list for review.
Naturally, the test could not pass in the transitional stages and was
therefore disabled via the `PREPARE_FOR_MAIN_BRANCH` prereq. Now that
the transition is complete, we can re-enable it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5515: use `main` as the name of the main branch for testing (part 3)
In the previous two commits, We just started preparing the `t5515` script
and part of `t/t5515/` for the upcoming change of the default
branch name to `main`. This patch adjusts the remainder of the supporting
material in `t/t5515/` (the patch adjusting all of `t/t5515/` would have
weighed more than 100kB and therefore not made it to the Git mailing
list for review).
Similar to what we did for the `t5515` script itself in the previous
commit, this patch was generated via:
t5515: use `main` as the name of the main branch for testing (part 2)
We just started preparing t5515 for the upcoming change of the default
branch name to `main`. This patch adjusts roughly half of the supporting
material in `t/t5515/` (the patch adjusting all of `t/t5515/` would have
weighed more than 100kB and therefore not made it to the Git mailing
list for review).
Similar to what we did for the `t5515` script itself in the previous
commit, this patch was generated via:
t5515: use `main` as the name of the main branch for testing (part 1)
As part of the effort to change the default branch name to `main`, let's
prepare t5515.
In addition to adjusting the references to the branch name itself, this
also requires two commit hashes to be adjusted (actually four, as there
is a SHA-1 _and_ a SHA-256 of both).
These commit hashes have been determined manually, of course, by running
the test after adjusting only the branch names, and then copying the
hashes from the log of the failed run.
Note: this patch only touches the t5515 script so far, not the
supporting material in t/t5515/. The resulting patch would have weighed
over 100kB and therefore the Git mailing list would have dropped it. The
files in t/t5515/ will be adjusted in the next two commits. As t5515
would fail without these adjustments, we temporarily skip it via the
`PREPARE_FOR_MAIN_BRANCH` prereq.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 2 Nov 2020 23:45:34 +0000 (23:45 +0000)]
merge,rebase,revert: select ort or recursive by config or environment
Allow the testsuite to run where it treats requests for "recursive" or
the default merge algorithm via consulting the environment variable
GIT_TEST_MERGE_ALGORITHM which is expected to either be "recursive" (the
old traditional algorithm) or "ort" (the new algorithm).
Also, allow folks to pick the new algorithm via config setting. It
turns out builtin/merge.c already had a way to allow users to specify a
different default merge algorithm: pull.twohead. Rather odd
configuration name (especially to be in the 'pull' namespace rather than
'merge') but it's there. Add that same configuration to rebase,
cherry-pick, and revert.
This required updating the various callsites that called merge_trees()
or merge_recursive() to conditionally call the new API, so this serves
as another demonstration of what the new API looks and feels like.
There are almost certainly some callsites that have not yet been
modified to work with the new merge algorithm, but this represents the
ones that I have been testing with thus far.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust tests so that they won't scream when the default initial
branch name is changed to 'main'.
* js/default-branch-name-part-4-minus-1:
t1400: prepare for `main` being default branch name
tests: prepare aligned mentions of the default branch name
t9902: prepare a test for the upcoming default branch name
t3200: prepare for `main` being shorter than `master`
t5703: adjust a test case for the upcoming default branch name
t6200: adjust suppression pattern to also match "main"
tests: start moving to a different default main branch name
t9801: use `--` in preparation for default branch rename
fmt-merge-msg: also suppress "into main" by default
Junio C Hamano [Mon, 2 Nov 2020 21:17:43 +0000 (13:17 -0800)]
Merge branch 'jt/apply-reverse-twice'
"git apply -R" did not handle patches that touch the same path
twice correctly, which has been corrected. This is most relevant
in a patch that changes a path from a regular file to a symbolic
link (and vice versa).
* jt/apply-reverse-twice:
apply: when -R, also reverse list of sections
Junio C Hamano [Mon, 2 Nov 2020 21:17:43 +0000 (13:17 -0800)]
Merge branch 'sc/sequencer-gpg-octopus'
"git rebase --rebase-merges" did not correctly pass --gpg-sign
command line option to underlying "git merge" when replaying a merge
using non-default merge strategy or when replaying an octopus merge
(because replaying a two-head merge with the default strategy was
done in a separate codepath, the problem did not trigger for most
users), which has been corrected.
* sc/sequencer-gpg-octopus:
t3435: add tests for rebase -r GPG signing
sequencer: pass explicit --no-gpg-sign to merge
sequencer: fix gpg option passed to merge subcommand
Junio C Hamano [Mon, 2 Nov 2020 21:17:42 +0000 (13:17 -0800)]
Merge branch 'en/test-selector'
Our test scripts can be told to run only individual pieces while
skipping others with the "--run=..." option; they were taught to
take a substring of test title, in addition to numbers, to name the
test pieces to run.
* en/test-selector:
test-lib: reduce verbosity of skipped tests
t6006, t6012: adjust tests to use 'setup' instead of synonyms
test-lib: allow selecting tests by substring/glob with --run
Junio C Hamano [Mon, 2 Nov 2020 21:17:39 +0000 (13:17 -0800)]
Merge branch 'bk/sob-dco'
Document that the meaning of a Signed-off-by trailer can vary from
project to project in the end-user documentation, and clarify what
it means to this project.
* bk/sob-dco:
Documentation: stylistically normalize references to Signed-off-by:
SubmittingPatches: clarify DCO is our --signoff rule
Documentation: clarify and expand description of --signoff
doc: preparatory clean-up of description on the sign-off option
Junio C Hamano [Mon, 2 Nov 2020 21:17:39 +0000 (13:17 -0800)]
Merge branch 'ds/commit-graph-merging-fix'
When "git commit-graph" detects the same commit recorded more than
once while it is merging the layers, it used to die. The code now
ignores all but one of them and continues.
* ds/commit-graph-merging-fix:
commit-graph: don't write commit-graph when disabled
commit-graph: ignore duplicates when merging layers
Junio C Hamano [Mon, 2 Nov 2020 21:17:38 +0000 (13:17 -0800)]
Merge branch 'es/test-cmp-typocatcher'
A test helper "test_cmp A B" was taught to diagnose missing files A
or B as a bug in test, but some tests legitimately wanted to notice
a failure to even create file B as an error, in addition to leaving
the expected result in it, and were misdiagnosed as a bug. This
has been corrected.
Junio C Hamano [Mon, 2 Nov 2020 21:17:37 +0000 (13:17 -0800)]
Merge branch 'js/avoid-split-sideband-message'
The side-band status report can be sent at the same time as the
primary payload multiplexed, but the demultiplexer on the receiving
end incorrectly split a single status report into two, which has
been corrected.
* js/avoid-split-sideband-message:
test-pkt-line: drop colon from sideband identity
sideband: report unhandled incomplete sideband messages as bugs
sideband: avoid reporting incomplete sideband messages
Elijah Newren [Mon, 2 Nov 2020 18:55:06 +0000 (18:55 +0000)]
strmap: new utility functions
Add strmap as a new struct and associated utility functions,
specifically for hashmaps that map strings to some value. The API is
taken directly from Peff's proposal at
https://lore.kernel.org/git/20180906191203.GA26184@sigill.intra.peff.net/
Note that similar string-list, I have a strdup_strings setting.
However, unlike string-list, strmap_init() does not take a parameter for
this setting and instead automatically sets it to 1; callers who want to
control this detail need to instead call strmap_init_with_options().
(Future patches will add additional parameters to
strmap_init_with_options()).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 2 Nov 2020 18:55:05 +0000 (18:55 +0000)]
hashmap: provide deallocation function names
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
Elijah Newren [Mon, 2 Nov 2020 18:55:04 +0000 (18:55 +0000)]
hashmap: introduce a new hashmap_partial_clear()
merge-ort is a heavy user of strmaps, which are built on hashmap.[ch].
clear_or_reinit_internal_opts() in merge-ort was taking about 12% of
overall runtime in my testcase involving rebasing 35 patches of
linux.git across a big rename. clear_or_reinit_internal_opts() was
calling hashmap_free() followed by hashmap_init(), meaning that not only
was it freeing all the memory associated with each of the strmaps just
to immediately allocate a new array again, it was allocating a new array
that was likely smaller than needed (thus resulting in later need to
rehash things). The ending size of the map table on the previous commit
was likely almost perfectly sized for the next commit we wanted to pick,
and not dropping and reallocating the table immediately is a win.
Add some new API to hashmap to clear a hashmap of entries without
freeing map->table (and instead only zeroing it out like alloc_table()
would do, along with zeroing the count of items in the table and the
shrink_at field).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 2 Nov 2020 18:55:03 +0000 (18:55 +0000)]
hashmap: allow re-use after hashmap_free()
Previously, once map->table had been freed, any calls to hashmap_put(),
hashmap_get(), or hashmap_remove() would cause a NULL pointer
dereference (since hashmap_free_() also zeros the memory; without that
zeroing, calling these functions would cause a use-after-free problem).
Modify these functions to check for a NULL table and automatically
allocate as needed.
Also add a HASHMAP_INIT(fn, data) macro for initializing hashmaps on the
stack without calling hashmap_init().
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sibo Dong [Sat, 31 Oct 2020 22:09:46 +0000 (22:09 +0000)]
git-prompt.sh: localize `option` in __git_ps1_show_upstream
The variable 'option' is used in __git_ps1_show_upstream()
without being localized.
This clobbers the variable the user may be using for other
purposes, which is bad. Luckily, $option is not used to carry
information around in the script as a global variable. The use
of it in this script has very limited scope (namely, only inside
this function), so just declare that it is "local".
Signed-off-by: Sibo Dong <sibo.dong@outlook.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The penultimate commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_blame_bloom_data'. Since 'cmd_blame' is the only caller
of 'setup_blame_bloom_data', it is now unnecessary for
'setup_blame_bloom_data' to receive 'path' as a separate argument, as
'sb.path' is already initialized.
Remove this argument from setup_blame_bloom_data's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Sun, 1 Nov 2020 17:28:46 +0000 (17:28 +0000)]
blame: simplify 'setup_scoreboard' interface
The previous commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_scoreboard'. Since 'cmd_blame' is the only caller of
'setup_scoreboard', it is now unnecessary for 'setup_scoreboard' to
receive 'path' as a separate argument, as 'sb.path' is already
initialized.
Remove this argument from setup_scoreboard's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Sun, 1 Nov 2020 17:28:45 +0000 (17:28 +0000)]
blame: enable funcname blaming with userdiff driver
In blame.c::cmd_blame, we send the 'path' field of the 'sb' 'struct
blame_scoreboard' as the 'path' argument to
'line-range.c::parse_range_arg', but 'sb.path' is not set yet; it's set
to the local variable 'path' a few lines later at line 1137.
This 'path' argument is only used in 'parse_range_arg' if we are blaming
a funcname, i.e. `git blame -L :<funcname> <path>`, and in that case it
is sent to 'parse_range_funcname', where it is used to determine if a
userdiff driver should be used for said <path> to match the given
funcname.
Since 'path' is yet unset, the userdiff driver is never used, so we fall
back to the default funcname regex, which is usually not appropriate for
paths that are set to use a specific userdiff driver, and thus either we
match some unrelated lines, or we die with
fatal: -L parameter '<funcname>' starting at line 1: no match
This has been the case ever since `git blame` learned to blame a
funcname in 13b8f68c1f (log -L: :pattern:file syntax to find by
funcname, 2013-03-28).
Enable funcname blaming for paths using specific userdiff drivers by
initializing 'sb.path' earlier in 'cmd_blame', when some of its other
fields are initialized, so that it is set when passed to
'parse_range_arg'.
Add a regression test in 'annotate-tests.sh', which is sourced in
t8001-annotate.sh and t8002-blame.sh, leveraging an existing file used
to test the userdiff patterns in t4018-diff-funcname.
Also, use 'sb.path' instead of 'path' when constructing the error
message at line 1114, for consistency.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
