Add a missing cond_resched() in bpf_fd_array_map_clear() loop.
For PROG_ARRAY maps with many entries this loop calls
prog_array_map_poke_run() per entry which can be expensive, and
without yielding this can cause RCU stalls under load:
====================
bpf: fix and improve open-coded task_vma iterator
Changelog:
v5: https://lore.kernel.org/all/20260326151111.4002475-1-puranjay@kernel.org/
Changes in v6:
- Replace local_irq_disable() + get_task_mm() with spin_trylock() on
alloc_lock to avoid a softirq deadlock: if the target task holds its
alloc_lock and gets interrupted, a softirq BPF program iterating
that task would deadlock on task_lock() (Gemini)
- Gate on CONFIG_MMU in patch 1 so that the mmput() fallback in
bpf_iter_mmput_async() cannot sleep in non-sleepable BPF context
on NOMMU; patch 2 tightens this to CONFIG_PER_VMA_LOCK (Gemini)
- Merge the split if (irq_work_busy) / if (!mmap_read_trylock())
back into a single if statement in patch 1 (Andrii)
- Flip comparison direction in bpf_iter_task_vma_find_next() so both
the locked and unlocked VMA failure cases read consistently:
end <= next_addr → PAGE_SIZE, else - use end (Andrii)
- Add Acked-by from Andrii on patch 3
v4: https://lore.kernel.org/all/20260316185736.649940-1-puranjay@kernel.org/
Changes in v5:
- Use get_task_mm() instead of a lockless task->mm read followed by
mmget_not_zero() to fix a use-after-free: mm_struct is not
SLAB_TYPESAFE_BY_RCU, so the lockless pointer can go stale (AI)
- Add a local bpf_iter_mmput_async() wrapper with #ifdef CONFIG_MMU
to avoid modifying fork.c and sched/mm.h outside the BPF tree
- Drop the fork.c and sched/mm.h changes that widened the
mmput_async() #if guard
- Disable IRQs around get_task_mm() to prevent raw tracepoint
re-entrancy from deadlocking on task_lock()
v3: https://lore.kernel.org/all/20260311225726.808332-1-puranjay@kernel.org/
Changes in v4:
- Disable task_vma iterator in irq_disabled() contexts to mitigate deadlocks (Alexei)
- Use a helper function to reset the snapshot (Andrii)
- Remove the redundant snap->vm_mm = kit->data->mm; (Andrii)
- Remove all irq_work deferral as the iterator will not work in
irq_disabled() sections anymore and _new() will return -EBUSY early.
v2: https://lore.kernel.org/all/20260309155506.23490-1-puranjay@kernel.org/
Changes in v3:
- Remove the rename patch 1 (Andrii)
- Put the irq_work in the iter data, per-cpu slot is not needed (Andrii)
- Remove the unnecessary !in_hardirq() in the deferral path (Alexei)
- Use PAGE_SIZE advancement in case vma shrinks back to maintain the
forward progress guarantee (AI)
v1: https://lore.kernel.org/all/20260304142026.1443666-1-puranjay@kernel.org/
Changes in v2:
- Add a preparatory patch to rename mmap_unlock_irq_work to
bpf_iter_mm_irq_work (Mykyta)
- Fix bpf_iter_mmput() to also defer for IRQ disabled regions (Alexei)
- Fix a build issue where mmpu_async() is not available without
CONFIG_MMU (kernel test robot)
- Reuse mmap_unlock_irq_work (after rename) for mmput (Mykyta)
- Move vma lookup (retry block) to a separate function (Mykyta)
This series fixes the mm lifecycle handling in the open-coded task_vma
BPF iterator and switches it from mmap_lock to per-VMA locking to reduce
contention. It then fixes a deadlock that is caused by holding locks
accross the body of the iterator where faulting is allowed.
Patch 1 fixes a use-after-free where task->mm was read locklessly and
could be freed before the iterator used it. It uses a trylock on
alloc_lock to safely read task->mm and acquire an mm reference, and
disables the iterator in irq_disabled() contexts by returning -EBUSY
from _new().
Patch 2 switches from holding mmap_lock for the entire iteration to
per-VMA locking via lock_vma_under_rcu(). This still doesn't fix the
deadlock problem because holding the per-vma lock for the whole
iteration can still cause lock ordering issues when a faultable helper
is called in the body of the iterator.
Patch 3 resolves the lock ordering problems caused by holding the
per-VMA lock or the mmap_lock (not applicable after patch 2) across BPF
program execution. It snapshots VMA fields under the lock, then drops
the lock before returning to the BPF program. File references are
managed via get_file()/fput() across iterations.
====================
Holding the per-VMA lock across the BPF program body creates a lock
ordering problem when helpers acquire locks that depend on mmap_lock:
vm_lock -> i_rwsem -> mmap_lock -> vm_lock
Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then
drop the lock before returning. The BPF program accesses only the
snapshot.
The verifier only trusts vm_mm and vm_file pointers (see
BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference-
counted with get_file() under the lock and released via fput() on the
next iteration or in _destroy(). vm_mm is already correct because
lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers
are left as-is by memcpy() since the verifier treats them as untrusted.
bpf: switch task_vma iterator from mmap_lock to per-VMA locks
The open-coded task_vma iterator holds mmap_lock for the entire duration
of iteration, increasing contention on this highly contended lock.
Switch to per-VMA locking. Find the next VMA via an RCU-protected maple
tree walk and lock it with lock_vma_under_rcu(). lock_next_vma() is not
used because its fallback takes mmap_read_lock(), and the iterator must
work in non-sleepable contexts.
lock_vma_under_rcu() is a point lookup (mas_walk) that finds the VMA
containing a given address but cannot iterate across gaps. An
RCU-protected vma_next() walk (mas_find) first locates the next VMA's
vm_start to pass to lock_vma_under_rcu().
Between the RCU walk and the lock, the VMA may be removed, shrunk, or
write-locked. On failure, advance past it using vm_end from the RCU
walk. Because the VMA slab is SLAB_TYPESAFE_BY_RCU, vm_end may be
stale; fall back to PAGE_SIZE advancement when it does not make forward
progress. Concurrent VMA insertions at addresses already passed by the
iterator are not detected.
CONFIG_PER_VMA_LOCK is required; return -EOPNOTSUPP without it.
bpf: fix mm lifecycle in open-coded task_vma iterator
The open-coded task_vma iterator reads task->mm locklessly and acquires
mmap_read_trylock() but never calls mmget(). If the task exits
concurrently, the mm_struct can be freed as it is not
SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free.
Safely read task->mm with a trylock on alloc_lock and acquire an mm
reference. Drop the reference via bpf_iter_mmput_async() in _destroy()
and error paths. bpf_iter_mmput_async() is a local wrapper around
mmput_async() with a fallback to mmput() on !CONFIG_MMU.
Reject irqs-disabled contexts (including NMI) up front. Operations used
by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async)
take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from
NMI or from a tracepoint that fires with those locks held could
deadlock.
A trylock on alloc_lock is used instead of the blocking task_lock()
(get_task_mm) to avoid a deadlock when a softirq BPF program iterates
a task that already holds its alloc_lock on the same CPU.
arm64: errata: Work around early CME DVMSync acknowledgement
C1-Pro acknowledges DVMSync messages before completing the SME/CME
memory accesses. Work around this by issuing an IPI to the affected CPUs
if they are running in EL0 with SME enabled.
Note that we avoid the local DSB in the IPI handler as the kernel runs
with SCTLR_EL1.IESB=1. This is sufficient to complete SME memory
accesses at EL0 on taking an exception to EL1. On the return to user
path, no barrier is necessary either. See the comment in
sme_set_active() and the more detailed explanation in the link below.
To avoid a potential IPI flood from malicious applications (e.g.
madvise(MADV_PAGEOUT) in a tight loop), track where a process is active
via mm_cpumask() and only interrupt those CPUs.
Link: https://lore.kernel.org/r/ablEXwhfKyJW1i7l@J2N7QTR9R3 Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: James Morse <james.morse@arm.com> Reviewed-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: tlb: Introduce __tlbi_sync_s1ish_{kernel,batch}() for TLB maintenance
Add __tlbi_sync_s1ish_kernel() similar to __tlbi_sync_s1ish() and use it
for kernel TLB maintenance. Also use this function in flush_tlb_all()
which is only used in relation to kernel mappings. Subsequent patches
can differentiate between workarounds that apply to user only or both
user and kernel.
A subsequent patch will add mm_struct to __tlbi_sync_s1ish(). Since
arch_tlbbatch_flush() is not specific to an mm, add a corresponding
__tlbi_sync_s1ish_batch() helper.
Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The kf_tasks[] design assumes task-based SCX ops don't nest - if they
did, kf_tasks[0] would get clobbered. The old scx_kf_allow() WARN_ONCE
caught invalid nesting via kf_mask, but that machinery is gone now.
Add a WARN_ON_ONCE(current->scx.kf_tasks[0]) at the top of each
SCX_CALL_OP_TASK*() macro. Checking kf_tasks[0] alone is sufficient: all
three variants (SCX_CALL_OP_TASK, SCX_CALL_OP_TASK_RET,
SCX_CALL_OP_2TASKS_RET) write to kf_tasks[0], so a non-NULL value at
entry to any of the three means re-entry from somewhere in the family.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Andrea Righi <arighi@nvidia.com>
sched_ext: Rename scx_kf_allowed_on_arg_tasks() to scx_kf_arg_task_ok()
The "kf_allowed" framing on this helper comes from the old runtime
scx_kf_allowed() gate, which has been removed. Rename it to describe what it
actually does in the new model.
Pure rename, no functional change.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Andrea Righi <arighi@nvidia.com>
Now that scx_kfunc_context_filter enforces context-sensitive kfunc
restrictions at BPF load time, the per-task runtime enforcement via
scx_kf_mask is redundant. Remove it entirely:
- Delete enum scx_kf_mask, the kf_mask field on sched_ext_entity, and
the scx_kf_allow()/scx_kf_disallow()/scx_kf_allowed() helpers along
with the higher_bits()/highest_bit() helpers they used.
- Strip the @mask parameter (and the BUILD_BUG_ON checks) from the
SCX_CALL_OP[_RET]/SCX_CALL_OP_TASK[_RET]/SCX_CALL_OP_2TASKS_RET
macros and update every call site. Reflow call sites that were
wrapped only to fit the old 5-arg form and now collapse onto a single
line under ~100 cols.
- Remove the in-kfunc scx_kf_allowed() runtime checks from
scx_dsq_insert_preamble(), scx_dsq_move(), scx_bpf_dispatch_nr_slots(),
scx_bpf_dispatch_cancel(), scx_bpf_dsq_move_to_local___v2(),
scx_bpf_sub_dispatch(), scx_bpf_reenqueue_local(), and the per-call
guard inside select_cpu_from_kfunc().
scx_bpf_task_cgroup() and scx_kf_allowed_on_arg_tasks() were already
cleaned up in the "drop redundant rq-locked check" patch.
scx_kf_allowed_if_unlocked() was rewritten in the preceding "decouple"
patch. No further changes to those helpers here.
Co-developed-by: Juntong Deng <juntong.deng@outlook.com> Signed-off-by: Juntong Deng <juntong.deng@outlook.com> Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
Move enforcement of SCX context-sensitive kfunc restrictions from per-task
runtime kf_mask checks to BPF verifier-time filtering, using the BPF core's
struct_ops context information.
A shared .filter callback is attached to each context-sensitive BTF set
and consults a per-op allow table (scx_kf_allow_flags[]) indexed by SCX
ops member offset. Disallowed calls are now rejected at program load time
instead of at runtime.
The old model split reachability across two places: each SCX_CALL_OP*()
set bits naming its op context, and each kfunc's scx_kf_allowed() check
OR'd together the bits it accepted. A kfunc was callable when those two
masks overlapped. The new model transposes the result to the caller side -
each op's allow flags directly list the kfunc groups it may call. The old
bit assignments were:
Unlocked ops carried no kf_mask bits and reached only unlocked kfuncs;
that maps directly to UNLOCKED in the new table.
Equivalence was checked by walking every (op, kfunc-group) combination
across SCX ops, SYSCALL, and non-SCX struct_ops callers against the old
scx_kf_allowed() runtime checks. With two intended exceptions (see below),
all combinations reach the same verdict; disallowed calls are now caught at
load time instead of firing scx_error() at runtime.
scx_bpf_dsq_move_set_slice() and scx_bpf_dsq_move_set_vtime() are
exceptions: they have no runtime check at all, but the new filter rejects
them from ops outside dispatch/unlocked. The affected cases are nonsensical
- the values these setters store are only read by
scx_bpf_dsq_move{,_vtime}(), which is itself restricted to
dispatch/unlocked, so a setter call from anywhere else was already dead
code.
Runtime scx_kf_mask enforcement is left in place by this patch and removed
in a follow-up.
Original-patch-by: Juntong Deng <juntong.deng@outlook.com> Original-patch-by: Cheng-Yang Chou <yphbchou0911@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
sched_ext: Drop redundant rq-locked check from scx_bpf_task_cgroup()
scx_kf_allowed_on_arg_tasks() runs both an scx_kf_allowed(__SCX_KF_RQ_LOCKED)
mask check and a kf_tasks[] check. After the preceding call-site fixes,
every SCX_CALL_OP_TASK*() invocation has kf_mask & __SCX_KF_RQ_LOCKED
non-zero, so the mask check is redundant whenever the kf_tasks[] check
passes. Drop it and simplify the helper to take only @sch and @p.
Fold the locking guarantee into the SCX_CALL_OP_TASK() comment block, which
scx_bpf_task_cgroup() now points to.
No functional change.
Extracted from a larger verifier-time kfunc context filter patch
originally written by Juntong Deng.
Original-patch-by: Juntong Deng <juntong.deng@outlook.com> Cc: Cheng-Yang Chou <yphbchou0911@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
sched_ext: Decouple kfunc unlocked-context check from kf_mask
scx_kf_allowed_if_unlocked() uses !current->scx.kf_mask as a proxy for "no
SCX-tracked lock held". kf_mask is removed in a follow-up patch, so its two
callers - select_cpu_from_kfunc() and scx_dsq_move() - need another basis.
Add a new bool scx_rq.in_select_cpu, set across the SCX_CALL_OP_TASK_RET
that invokes ops.select_cpu(), to capture the one case where SCX itself
holds no lock but try_to_wake_up() holds @p's pi_lock. Together with
scx_locked_rq(), it expresses the same accepted-context set.
select_cpu_from_kfunc() needs a runtime test because it has to take
different locking paths depending on context. Open-code as a three-way
branch. The unlocked branch takes raw_spin_lock_irqsave(&p->pi_lock)
directly - pi_lock alone is enough for the fields the kfunc reads, and is
lighter than task_rq_lock().
scx_dsq_move() doesn't really need a runtime test - its accepted contexts
could be enforced at verifier load time. But since the runtime state is
already there and using it keeps the upcoming load-time filter simpler, just
write it the same way: (scx_locked_rq() || in_select_cpu) &&
!kf_allowed(DISPATCH).
scx_kf_allowed_if_unlocked() is deleted with the conversions.
No semantic change.
v2: s/No functional change/No semantic change/ - the unlocked path now acquires
pi_lock instead of the heavier task_rq_lock() (Andrea Righi).
Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
sched_ext: Fix ops.cgroup_move() invocation kf_mask and rq tracking
sched_move_task() invokes ops.cgroup_move() inside task_rq_lock(tsk), so
@p's rq lock is held. The SCX_CALL_OP_TASK invocation mislabels this:
- kf_mask = SCX_KF_UNLOCKED (== 0), claiming no lock is held.
- rq = NULL, so update_locked_rq() doesn't run and scx_locked_rq()
returns NULL.
Switch to SCX_KF_REST and pass task_rq(p), matching ops.set_cpumask()
from set_cpus_allowed_scx().
Three effects:
- scx_bpf_task_cgroup() becomes callable (was rejected by
scx_kf_allowed(__SCX_KF_RQ_LOCKED)). Safe; rq lock is held.
- scx_bpf_dsq_move() is now rejected (was allowed via the unlocked
branch). Calling it while holding an unrelated task's rq lock is
risky; rejection is correct.
- scx_bpf_select_cpu_*() previously took the unlocked branch in
select_cpu_from_kfunc() and called task_rq_lock(p, &rf), which
would deadlock against the already-held pi_lock. Now it takes the
locked-rq branch and is rejected with -EPERM via the existing
kf_allowed(SCX_KF_SELECT_CPU | SCX_KF_ENQUEUE) check. Latent
deadlock fix.
No in-tree scheduler is known to call any of these from ops.cgroup_move().
v2: Add Fixes: tag (Andrea Righi).
Fixes: 18853ba782be ("sched_ext: Track currently locked rq") Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
sched_ext: Add select_cpu kfuncs to scx_kfunc_ids_unlocked
select_cpu_from_kfunc() has an extra scx_kf_allowed_if_unlocked() branch
that accepts calls from unlocked contexts and takes task_rq_lock() itself
- a "callable from unlocked" property encoded in the kfunc body rather
than in set membership. That's fine while the runtime check is the
authoritative gate, but the upcoming verifier-time filter uses set
membership as the source of truth and needs it to reflect every context
the kfunc may be called from.
Add the three select_cpu kfuncs to scx_kfunc_ids_unlocked so their full
set of callable contexts is captured by set membership. This follows the
existing dual-set convention used by scx_bpf_dsq_move{,_vtime} and
scx_bpf_dsq_move_set_{slice,vtime}, which are members of both
scx_kfunc_ids_dispatch and scx_kfunc_ids_unlocked.
While at it, add brief comments on each duplicate BTF_ID_FLAGS block
(including the pre-existing dsq_move ones) explaining the dual
membership.
No runtime behavior change: the runtime check in select_cpu_from_kfunc()
remains the authoritative gate until it is removed along with the rest
of the scx_kf_mask enforcement in a follow-up.
v2: Clarify dispatch-set comment to name scx_bpf_dsq_move*() explicitly so it
doesn't appear to cover scx_bpf_sub_dispatch() (Andrea Righi).
Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
sched_ext: Drop TRACING access to select_cpu kfuncs
The select_cpu kfuncs - scx_bpf_select_cpu_dfl(), scx_bpf_select_cpu_and()
and __scx_bpf_select_cpu_and() - take task_rq_lock() internally. Exposing
them via scx_kfunc_set_idle to BPF_PROG_TYPE_TRACING is unsafe: arbitrary
tracing contexts (kprobes, tracepoints, fentry, LSM) may run with @p's
pi_lock state unknown.
Move them out of scx_kfunc_ids_idle into a new scx_kfunc_ids_select_cpu
set registered only for STRUCT_OPS and SYSCALL.
Extracted from a larger verifier-time kfunc context filter patch
originally written by Juntong Deng.
Original-patch-by: Juntong Deng <juntong.deng@outlook.com> Cc: Cheng-Yang Chou <yphbchou0911@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
Miquel Raynal [Wed, 25 Mar 2026 17:04:50 +0000 (18:04 +0100)]
mtd: spinand: winbond: Declare the QE bit on W25NxxJW
Factory default for this bit is "set" (at least on the chips I have),
but we must make sure it is actually set by Linux explicitly, as the
bit is writable by an earlier stage.
Fixes: 6a804fb72de5 ("mtd: spinand: winbond: add support for serial NAND flash") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Leo Yan [Fri, 10 Apr 2026 07:37:01 +0000 (08:37 +0100)]
perf arm_spe: Improve SIMD flags setting
Fill in ASE and SME operations for the SIMD arch field.
Also set the predicate flags for SVE and SME, but differences between
them: SME does not have a predicate flag, so the setting is based on
events. SVE provides a predicate flag to indicate whether the predicate
is disabled, which allows it to be distinguished into four cases: full
predicates, empty predicates, fully predicated, and disabled predicates.
Reviewed-by: James Clark <james.clark@linaro.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Leo Yan [Fri, 10 Apr 2026 07:37:00 +0000 (08:37 +0100)]
perf report: Update document for SIMD flags
Update SIMD architecture and predicate flags.
Reviewed-by: James Clark <james.clark@linaro.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Leo Yan [Fri, 10 Apr 2026 07:36:59 +0000 (08:36 +0100)]
perf sort: Sort disabled and full predicated flags
According to the Arm ARM (ARM DDI 0487, L.a), section D18.2.6
"Events packet", apart from the empty predicate and partial
predicates, an SVE or SME operation can be predicate-disabled
or full predicated.
To provide complete results, introduce two predicate types for
these cases.
Reviewed-by: James Clark <james.clark@linaro.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Leo Yan [Fri, 10 Apr 2026 07:36:58 +0000 (08:36 +0100)]
perf sort: Support sort ASE and SME
Support sort Advance SIMD extension (ASE) and SME.
Reviewed-by: James Clark <james.clark@linaro.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Paulo Alcantara [Tue, 7 Apr 2026 22:51:35 +0000 (19:51 -0300)]
smb: client: set ATTR_TEMPORARY with O_TMPFILE | O_EXCL
Set ATTR_TEMPORARY attribute on temporary delete-on-close files when
O_EXCL is specified in conjunction with O_TMPFILE to let some servers
cache as much data as possible and possibly never persist them into
storage, thereby improving performance.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Cc: David Howells <dhowells@redhat.com> Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Tue, 7 Apr 2026 19:58:10 +0000 (16:58 -0300)]
smb: client: add support for O_TMPFILE
Implement O_TMPFILE support for SMB2+ in the CIFS client.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Tue, 7 Apr 2026 19:58:09 +0000 (16:58 -0300)]
vfs: introduce d_mark_tmpfile_name()
CIFS requires O_TMPFILE dentries to have names of newly created
delete-on-close files in the server so it can build full pathnames
from the root of the share when performing operations on them.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: David Howells <dhowells@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: linux-fsdevel@vger.kernel.org Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
Thomas Huth [Fri, 10 Apr 2026 15:46:37 +0000 (17:46 +0200)]
efi/capsule-loader: fix incorrect sizeof in phys array reallocation
The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses
sizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might be
causing an undersized allocation.
The allocation is also inconsistent with the initial array allocation in
efi_capsule_open() that allocates one entry with sizeof(phys_addr_t),
and the efi_capsule_write() function that stores phys_addr_t values (not
pointers) via page_to_phys().
On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), this
goes unnoticed. On 32-bit systems with PAE where phys_addr_t is 64-bit but
pointers are 32-bit, this allocates half the required space, which might
lead to a heap buffer overflow when storing physical addresses.
This is similar to the bug fixed in commit fccfa646ef36 ("efi/capsule-loader:
fix incorrect allocation size") which fixed the same issue at the initial
allocation site.
Merge tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"The kernfs rbtree is keyed by (hash, ns, name) where the hash
is seeded with the raw namespace pointer via init_name_hash(ns).
The resulting hash values are exposed to userspace through
readdir seek positions, and the pointer-based ordering in
kernfs_name_compare() is observable through entry order.
Switch from raw pointers to ns_common::ns_id for both hashing
and comparison.
A preparatory commit first replaces all const void * namespace
parameters with const struct ns_common * throughout kernfs, sysfs,
and kobject so the code can access ns->ns_id. Also compare the
ns_id when hashes match in the rbtree to handle crafted collisions.
Also fix eventpoll RCU grace period issue and a cachefiles refcount
problem"
* tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
kernfs: make directory seek namespace-aware
kernfs: use namespace id instead of pointer for hashing and comparison
kernfs: pass struct ns_common instead of const void * for namespace tags
eventpoll: defer struct eventpoll free to RCU grace period
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
hwmon: (powerz) Avoid cacheline sharing for DMA buffer
Depending on the architecture the transfer buffer may share a cacheline
with the following mutex. As the buffer may be used for DMA, that is
problematic.
Use the high-level DMA helpers to make sure that cacheline sharing can
not happen.
Also drop the comment, as the helpers are documentation enough.
Li Ming [Sat, 21 Mar 2026 06:14:59 +0000 (14:14 +0800)]
cxl/hdm: Add support for 32 switch decoders
Per CXL r4.0 section 8.2.4.20.1. CXL host bridge and switch ports can
support 32 HDM decoders. Current implementation misses some decoders on
CXL host bridge and switch in the case that the value of Decoder Count
field in CXL HDM decoder Capability Register is greater than or equal to
9.
Update calculation implementation to ensure the decoder count calculation
is correct for CXL host bridge/switch ports.
Signed-off-by: Li Ming <ming.li@zohomail.com> Reviewed-by: Gregory Price <gourry@gourry.net> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Link: https://patch.msgid.link/20260321061459.1910205-1-ming.li@zohomail.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This exceeds LONG_MAX (2,147,483,647), resulting in signed integer
overflow.
Additionally, dividing before multiplying by regval loses precision
unnecessarily.
Use u64 arithmetic with div_u64() and multiply before dividing to
retain precision. The intermediate product cannot overflow u64
(worst case: 51200000 * 8 * 65535 = 26843136000000). Power is
inherently non-negative, so unsigned types are the natural fit.
Cap the result to LONG_MAX before returning it through the hwmon
callback.
Fixes: 39671a14df4f2 ("hwmon: (isl28022) new driver for ISL28022 power monitor") Cc: stable@vger.kernel.org Signed-off-by: Sanman Pradhan <psanman@juniper.net> Link: https://lore.kernel.org/r/20260410002613.424557-1-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data()
Fix two bugs in pt5161l_read_block_data():
1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24],
but i2c_smbus_read_block_data() can return up to
I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into
the caller's buffer before the return value can be checked, so
the post-read length validation does not prevent a stack overrun
if a device returns more than 24 bytes. Resize the buffer to
I2C_SMBUS_BLOCK_MAX.
2. Unexpected positive return on length mismatch: When all three
retries are exhausted because the device returns data with an
unexpected length, i2c_smbus_read_block_data() returns a positive
byte count. The function returns this directly, and callers treat
any non-negative return as success, processing stale or incomplete
buffer contents. Return -EIO when retries are exhausted with a
positive return value, preserving the negative error code on I2C
failure.
hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt
wait_for_completion_interruptible_timeout() returns -ERESTARTSYS when
interrupted. This needs to abort the URB and return an error. No data
has been received from the device so any reads from the transfer
buffer are invalid.
The original code tests !ret, which only catches the timeout case (0).
On signal delivery (-ERESTARTSYS), !ret is false so the function skips
usb_kill_urb() and falls through to read from the unfilled transfer
buffer.
Fix by capturing the return value into a long (matching the function
return type) and handling signal (negative) and timeout (zero) cases
with separate checks that both call usb_kill_urb() before returning.
hwmon: (powerz) Fix use-after-free on USB disconnect
After powerz_disconnect() frees the URB and releases the mutex, a
subsequent powerz_read() call can acquire the mutex and call
powerz_read_data(), which dereferences the freed URB pointer.
Fix by:
- Setting priv->urb to NULL in powerz_disconnect() so that
powerz_read_data() can detect the disconnected state.
- Adding a !priv->urb check at the start of powerz_read_data()
to return -ENODEV on a disconnected device.
- Moving usb_set_intfdata() before hwmon registration so the
disconnect handler can always find the priv pointer.
Merge tag 'pinctrl-v7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some late pin control fixes. I'm not happy to have bugs so late in the
kernel cycle, but they are all driver specifics so I guess it's how it
is.
- Three fixes for the Intel pin control driver fixing the feature set
for the new silicon
- One fix for an IRQ storm in the MCP23S08 pin controller/GPIO
expander"
* tag 'pinctrl-v7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mcp23s08: Disable all pin interrupts during probe
pinctrl: intel: Enable 3-bit PAD_OWN feature
pinctrl: intel: Fix the revision for new features (1kOhm PD, HW debouncer)
pinctrl: intel: Improve capability support
Chris Packham [Fri, 10 Apr 2026 01:24:12 +0000 (13:24 +1200)]
hwmon: pmbus: Add support for Sony APS-379
Add pmbus support for Sony APS-379 power supplies. There are a few PMBUS
commands that return data that is undocumented/invalid so these need to
be rejected with -ENXIO. The READ_VOUT command returns data in linear11
format instead of linear16 so we need to workaround this.
HID: logitech-dj: fix wrong detection of bad DJ_SHORT output report
commit b6a57912854e ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT
related user initiated OOB write") assumed that all HID devices attached
to the logitech-dj driver was having an output report of DJ_SHORT.
However, on the receiver itself, we have 2 other HID device we attach
here: the mouse emulation and the keyboard emulation. For those devices
the value of rep is NULL and we are triggered a segfault here.
This is doubly required because logitech-dj also handles non DJ devices
that might not have the DJ collection.
Fixes: b6a57912854e ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write") Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
ALSA: usb-audio: Add quirk for PreSonus AudioBox USB
The PreSonus AudioBox USB (0x194f:0x0301) only supports S24_3LE
format for both playback and capture. It does not support S16_LE
despite being a USB full-speed device. Add explicit format quirks
for both the playback (interface 2) and capture (interface 3)
interfaces to ensure correct format negotiation.
fbdev: udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO
Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash.
fbdev: tdfxfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO
Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash.
Wolfram Sang [Fri, 10 Apr 2026 14:31:25 +0000 (16:31 +0200)]
Documentation: seq_file: drop 2.6 reference
Even kernels after 2.6 have seq-file support.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260410143234.43610-2-wsa+renesas@sang-engineering.com>
Cássio Gabriel [Fri, 10 Apr 2026 13:56:52 +0000 (10:56 -0300)]
ALSA: interwave: guard PM-only restore helpers with CONFIG_PM
The InterWave PM patch added snd_interwave_restore_regs() and
snd_interwave_restore_memory() as static helpers, but both are used only
from the resume path under CONFIG_PM.
On configurations without CONFIG_PM, such as alpha allyesconfig, this
leaves both helpers unused and triggers -Wunused-function warnings with
W=1.
Move the PM-only helpers into the existing CONFIG_PM section. Keep
__snd_interwave_restore_regs() outside the guard because it is also used
during probe-time initialization.
ALSA: usb-audio: Evaluate packsize caps at the right place
We introduced the upper bound checks of the packet sizes by the
ep->maxframesize for avoiding the URB submission errors. However, the
check was applied at an incorrect place in the function
snd_usb_endpoint_set_params() where ep->maxframesize isn't defined
yet; the value is defined at a bit later position. So this ended up
with a failure at the first run while the second run works.
For fixing it, move the check at the correct place, right after the
calculation of ep->maxframesize in the same function.
Vincent Guittot [Fri, 10 Apr 2026 13:23:21 +0000 (15:23 +0200)]
sched/eevdf: Clear buddies for preempt_short
next buddy should not prevent shorter slice preemption. Don't take buddy
into account when checking if shorter slice entity can preempt and clear it
if the entity with a shorter slice can preempt current.
Test on snapdragon rb5:
hackbench -T -p -l 16000000 -g 2 1> /dev/null &
hackbench runs in cgroup /test-A
cyclictest -t 1 -i 2777 -D 63 --policy=fair --mlock -h 20000 -q
cyclictest runs in cgroup /test-B
Dmitry Baryshkov [Tue, 10 Mar 2026 23:02:58 +0000 (01:02 +0200)]
Bluetooth: qca: enable pwrseq support for WCN39xx devices
The WCN39xx family of WiFi/BT chips incorporates a simple PMU, spreading
voltages over internal rails. Implement support for using powersequencer
for this family of QCA devices in addition to using regulators.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Kiran K [Sat, 28 Feb 2026 09:12:31 +0000 (14:42 +0530)]
Bluetooth: btintel: Add support for hybrid signature for ScP2 onwards
If FW image has hybrid signature (ECDSA and LMS) then send CSS header,
ECDSA public key, ECDSA signature, LMS public key, LMS signature and
command buffer to device.
Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Christian Eggers [Wed, 25 Feb 2026 17:07:26 +0000 (18:07 +0100)]
Bluetooth: L2CAP: CoC: Disconnect if received packet size exceeds MPS
Core 6.0, Vol 3, Part A, 3.4.3:
"... If the payload size of any K-frame exceeds the receiver's MPS, the
receiver shall disconnect the channel..."
This fixes L2CAP/LE/CFC/BV-27-C (running together with 'l2test -r -P
0x0027 -V le_public -I 100').
Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Co-developed-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Co-developed-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Co-developed-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sean Wang [Tue, 24 Feb 2026 06:13:18 +0000 (00:13 -0600)]
mmc: sdio: add MediaTek MT7902 SDIO device ID
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Thorsten Blum [Mon, 23 Feb 2026 23:33:42 +0000 (00:33 +0100)]
Bluetooth: btintel_pcie: Use struct_size to improve hci_drv_read_info
Use struct_size(), which provides additional compile-time checks for
structures with flexible array members (e.g., __must_be_array()), to
determine the allocation size for a new 'struct hci_drv_rp_read_info'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dylan Eray [Thu, 19 Feb 2026 19:32:09 +0000 (20:32 +0100)]
Bluetooth: btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
Add USB device ID (04ca:3807) for a Lite-On Wireless_Device containing
a MediaTek MT7921 (MT7920) Bluetooth chipset found in Acer laptops.
Without this entry, btusb binds via the generic USB class-based wildcard
match but never sets the BTUSB_MEDIATEK flag. This means btmtk never
triggers firmware loading, and the driver sends a raw HCI Reset that
the uninitialized chip cannot respond to, resulting in:
Bluetooth: hci0: Opcode 0x0c03 failed: -110
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below:
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Dylan Eray <dylan.eray6@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hans de Goede [Thu, 12 Feb 2026 14:17:21 +0000 (15:17 +0100)]
Bluetooth: hci_qca: Fix BT not getting powered-off on rmmod
The BT core skips calling the hci_dev's shutdown method when the HCI
is unregistered. This means that qca_power_off() was not getting called
leaving BT powered on.
This causes regulators / pwrseq providers to not get disabled which also
causes problem when re-loading the module because regulators and pwrseq
providers have an enablecount which now has never dropped to 0, causing
the BT to not get properly reset between rmmod and re-load which causes
initialization failure on the re-load.
Fix this by calling qca_power_off() from qca_close() when BT has not
already been powered off through a qca_hci_shutdown() call.
hci_ldisc.c will call qca_close() after freeing the hdev, so this
means that qca_power_off() can now no longer deref hu->hdev, change
the logging in qca_power_off() to no longer use hu->hdev.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hans de Goede [Thu, 12 Feb 2026 14:17:20 +0000 (15:17 +0100)]
Bluetooth: hci_qca: Fix confusing shutdown() and power_off() naming
The function called qca_power_off() is actually the hci_dev shutdown
handler, rename it to qca_hci_shutdown() to make this clear.
While the qca_power_shutdown() function is actually the counter-part
of qca_power_on() rename it to qca_power_off() to make this clear.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Marek Vasut [Mon, 9 Feb 2026 17:11:48 +0000 (18:11 +0100)]
Bluetooth: btbcm: Add entry for BCM4343A2 UART Bluetooth
This patch adds the device ID for the BCM4343A2 module, found e.g.
in the muRata 1YN WiFi+BT combined device. The required firmware
file is named 'BCM4343A2.hcd'.
Signed-off-by: Marek Vasut <marex@nabladev.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Vivek Sahu [Tue, 10 Feb 2026 12:01:01 +0000 (17:31 +0530)]
Bluetooth: qca: Refactor code on the basis of chipset names
Whenever new chipset support is added to the driver code,
we ended up adding chipset name to the last of the switch case
arising code readability issue because of improper sorting of
the chipset names in various places of the code.
Refactor code such a way that new chipset can be added easily
in the code without compromising code readability.
Signed-off-by: Vivek Sahu <vivek.sahu@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Chris Lu [Tue, 3 Feb 2026 06:25:10 +0000 (14:25 +0800)]
Bluetooth: btmtk: Add reset mechanism if downloading firmware failed
Add a new flag 'BTMTK_FIRMWARE_DL_RETRY'.
If an error occurs during mt79xx firmware download process, this flag
will be set and cleared after a reset. If the flag is already set and
firmware still cannot be loaded successfully after a reset, no further
reset attempts will be made. In other words, if there is a problem during
firmware download, only one reset will be attempted.
Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Chris Lu [Tue, 3 Feb 2026 06:25:09 +0000 (14:25 +0800)]
Bluetooth: btmtk: add status check in mt79xx firmware setup
To prevent abnormal controller states, it is necessary to check
status in another part of the mt79xx firmware setup. During this
process, receiving the 'BTMTK_WMT_PATCH_PROGRESS' status is unexpected.
If this occurs, it should be treated as an error, and driver must be
prevented from continuing execution.
Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Richard Cheng [Thu, 9 Apr 2026 05:19:02 +0000 (13:19 +0800)]
fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal
CXL is linked before fwctl in drivers/Makefile. Both use `module_init, so
`cxl_pci_driver_init()` runs first. When `cxl_pci_probe()` calls
`fwctl_register()` and then `device_add()`, fwctl_class is not yet
registered because fwctl_init() hasn't run, causing `class_to_subsys()` to
return NULL and skip knode_class initialization.
On device removal, `class_to_subsys()` returns non-NULL, and
`device_del()` calls `klist_del()` on the uninitialized knode, triggering
a NULL pointer dereference.
Fixes: 858ce2f56b52 ("cxl: Add FWCTL support to CXL") Link: https://patch.msgid.link/r/20260409051902.40218-1-icheng@nvidia.com Signed-off-by: Richard Cheng <icheng@nvidia.com> Reviewed-by: Kai-Heng Feng <kaihengf@nvidia.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If retries are exhausted, driver should not do futher operation.
During mt79xx firmware download process, if the retry count reaches0,
driver will return an -EIO error and release the firmware resources.
Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dongyang Jin [Tue, 3 Feb 2026 07:10:48 +0000 (15:10 +0800)]
Bluetooth: btbcm: remove done label in btbcm_patchram
There is no point in having the label since all it does is return the
value in the 'err' variable. Instead make every goto return directly
and remove the label.
Signed-off-by: Dongyang Jin <jindongyang@kylinos.cn> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Tue, 3 Feb 2026 19:57:21 +0000 (21:57 +0200)]
Bluetooth: hci_core: Rate limit the logging of invalid ISO handle
Some controller firmwares (eg for MT7925) continuously send invalid ISO
packet, which result to "ISO unknown handle" error spam in logs. It's
not important to show all of them to the user.
Rate limit these ISO error messages, similarly as we do for SCO.
Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
platform/x86: int3472: Parameterize LED con_id in registration
Add a con_id parameter to skl_int3472_register_led() to allow callers
to specify both the LED name suffix and lookup con_id instead of
hardcoding "privacy". This prepares for registering additional LED
types with different names.
While at it, rename the privacy LED's GPIO con_id from "privacy-led"
to "privacy" in int3472_get_con_id_and_polarity() and pass it
directly to skl_int3472_register_led(), reducing churn when adding
new LED types.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Marco Nenciarini <mnencia@kcore.it> Link: https://patch.msgid.link/20260401203638.1601661-4-mnencia@kcore.it Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: int3472: Rename pled to led in LED registration code
Rename the privacy LED type, struct member, and functions from "pled"
to "led" in preparation for supporting additional LED types beyond
just the privacy LED.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Marco Nenciarini <mnencia@kcore.it> Link: https://patch.msgid.link/20260401203638.1601661-3-mnencia@kcore.it Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: int3472: Use local variable for LED struct access
Introduce a local struct int3472_pled pointer in the LED registration,
unregistration, and brightness callback functions to avoid repeatedly
dereferencing int3472->pled. In the brightness callback, use
container_of() to get the int3472_pled struct directly instead of
going through int3472_discrete_device.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Marco Nenciarini <mnencia@kcore.it> Link: https://patch.msgid.link/20260401203638.1601661-2-mnencia@kcore.it Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Jonathan Corbet [Fri, 10 Apr 2026 13:50:40 +0000 (07:50 -0600)]
Merge tag 'Chinese-docs-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/alexs/linux into tmp
Chinese translation docs for 7.1
This is the Chinese translation subtree for 7.1. It includes
the following changes:
- Add the rust docs translation
- Fix an inconsistent statement in dev-tools/testing-overview
- sync process/2.Process.rst with English version
Merge branches 'for-next/misc', 'for-next/tlbflush', 'for-next/ttbr-macros-cleanup', 'for-next/kselftest', 'for-next/feat_lsui', 'for-next/mpam', 'for-next/hotplug-batched-tlbi', 'for-next/bbml2-fixes', 'for-next/sysreg', 'for-next/generic-entry' and 'for-next/acpi', remote-tracking branches 'arm64/for-next/perf' and 'arm64/for-next/read-once' into for-next/core
* arm64/for-next/perf:
: Perf updates
perf/arm-cmn: Fix resource_size_t printk specifier in arm_cmn_init_dtc()
perf/arm-cmn: Fix incorrect error check for devm_ioremap()
perf: add NVIDIA Tegra410 C2C PMU
perf: add NVIDIA Tegra410 CPU Memory Latency PMU
perf/arm_cspmu: nvidia: Add Tegra410 PCIE-TGT PMU
perf/arm_cspmu: nvidia: Add Tegra410 PCIE PMU
perf/arm_cspmu: Add arm_cspmu_acpi_dev_get
perf/arm_cspmu: nvidia: Add Tegra410 UCF PMU
perf/arm_cspmu: nvidia: Rename doc to Tegra241
perf/arm-cmn: Stop claiming entire iomem region
arm64: cpufeature: Use pmuv3_implemented() function
arm64: cpufeature: Make PMUVer and PerfMon unsigned
KVM: arm64: Read PMUVer as unsigned
* arm64/for-next/read-once:
: Fixes for __READ_ONCE() with CONFIG_LTO=y
arm64, compiler-context-analysis: Permit alias analysis through __READ_ONCE() with CONFIG_LTO=y
arm64: Optimize __READ_ONCE() with CONFIG_LTO=y
* for-next/misc:
: Miscellaneous cleanups/fixes
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
arm64: mm: Use generic enum pgtable_level
arm64: scs: Remove redundant save/restore of SCS SP on entry to/from EL0
arm64: remove ARCH_INLINE_*
* for-next/tlbflush:
: Refactor the arm64 TLB invalidation API and implementation
arm64: mm: __ptep_set_access_flags must hint correct TTL
arm64: mm: Provide level hint for flush_tlb_page()
arm64: mm: Wrap flush_tlb_page() around __do_flush_tlb_range()
arm64: mm: More flags for __flush_tlb_range()
arm64: mm: Refactor __flush_tlb_range() to take flags
arm64: mm: Refactor flush_tlb_page() to use __tlbi_level_asid()
arm64: mm: Simplify __flush_tlb_range_limit_excess()
arm64: mm: Simplify __TLBI_RANGE_NUM() macro
arm64: mm: Re-implement the __flush_tlb_range_op macro in C
arm64: mm: Inline __TLBI_VADDR_RANGE() into __tlbi_range()
arm64: mm: Push __TLBI_VADDR() into __tlbi_level()
arm64: mm: Implicitly invalidate user ASID based on TLBI operation
arm64: mm: Introduce a C wrapper for by-range TLB invalidation
arm64: mm: Re-implement the __tlbi_level macro as a C function
* for-next/ttbr-macros-cleanup:
: Cleanups of the TTBR1_* macros
arm64/mm: Directly use TTBRx_EL1_CnP
arm64/mm: Directly use TTBRx_EL1_ASID_MASK
arm64/mm: Describe TTBR1_BADDR_4852_OFFSET
* for-next/kselftest:
: arm64 kselftest updates
selftests/arm64: Implement cmpbr_sigill() to hwcap test
* for-next/feat_lsui:
: Futex support using FEAT_LSUI instructions to avoid toggling PAN
arm64: armv8_deprecated: Disable swp emulation when FEAT_LSUI present
arm64: Kconfig: Add support for LSUI
KVM: arm64: Use CAST instruction for swapping guest descriptor
arm64: futex: Support futex with FEAT_LSUI
arm64: futex: Refactor futex atomic operation
KVM: arm64: kselftest: set_id_regs: Add test for FEAT_LSUI
KVM: arm64: Expose FEAT_LSUI to guests
arm64: cpufeature: Add FEAT_LSUI
* for-next/mpam: (40 commits)
: Expose MPAM to user-space via resctrl:
: - Add architecture context-switch and hiding of the feature from KVM.
: - Add interface to allow MPAM to be exposed to user-space using resctrl.
: - Add errata workaoround for some existing platforms.
: - Add documentation for using MPAM and what shape of platforms can use resctrl
arm64: mpam: Add initial MPAM documentation
arm_mpam: Quirk CMN-650's CSU NRDY behaviour
arm_mpam: Add workaround for T241-MPAM-6
arm_mpam: Add workaround for T241-MPAM-4
arm_mpam: Add workaround for T241-MPAM-1
arm_mpam: Add quirk framework
arm_mpam: resctrl: Call resctrl_init() on platforms that can support resctrl
arm64: mpam: Select ARCH_HAS_CPU_RESCTRL
arm_mpam: resctrl: Add empty definitions for assorted resctrl functions
arm_mpam: resctrl: Update the rmid reallocation limit
arm_mpam: resctrl: Add resctrl_arch_rmid_read()
arm_mpam: resctrl: Allow resctrl to allocate monitors
arm_mpam: resctrl: Add support for csu counters
arm_mpam: resctrl: Add monitor initialisation and domain boilerplate
arm_mpam: resctrl: Add kunit test for control format conversions
arm_mpam: resctrl: Add support for 'MB' resource
arm_mpam: resctrl: Wait for cacheinfo to be ready
arm_mpam: resctrl: Add rmid index helpers
arm_mpam: resctrl: Convert to/from MPAMs fixed-point formats
arm_mpam: resctrl: Hide CDP emulation behind CONFIG_EXPERT
...
* for-next/hotplug-batched-tlbi:
: arm64/mm: Enable batched TLB flush in unmap_hotplug_range()
arm64/mm: Reject memory removal that splits a kernel leaf mapping
arm64/mm: Enable batched TLB flush in unmap_hotplug_range()
* for-next/bbml2-fixes:
: Fixes for realm guest and BBML2_NOABORT
arm64: mm: Remove pmd_sect() and pud_sect()
arm64: mm: Handle invalid large leaf mappings correctly
arm64: mm: Fix rodata=full block mapping support for realm guests
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update SMIDR_EL1 to DDI0601 2025-06
* for-next/generic-entry:
: More arm64 refactoring towards using the generic entry code
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
entry: Fix stale comment for irqentry_enter()
dm cache: fix missing return in invalidate_committed's error path
In passthrough mode, dm-cache defers write submission until after
metadata commit completes via the invalidate_committed() continuation.
On commit error, invalidate_committed() calls invalidate_complete() to
end the bio and free the migration struct, after which it should return
immediately.
The patch 4ca8b8bd952d ("dm cache: fix write hang in passthrough mode")
omitted this early return, causing execution to fall through into the
success path on error. This results in use-after-free on the migration
struct in the subsequent calls.
Fix by adding the missing return after the invalidate_complete() call.
Fixes: 4ca8b8bd952d ("dm cache: fix write hang in passthrough mode") Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/dm-devel/adjMq6T5RRjv_uxM@stanley.mountain/ Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
This occurs because perf_l2_init() calls err(). However, the code has been
written in such a manner that it is able to perform cleanup and continue.
Therefore, this issue can be addressed by changing the appropriate calls
to err() to warnx().
Additionally, correct the PMU type arguments passed to the warning strings
in the ecore and lcore blocks so the logs accurately reflect the failing
counter type.
Signed-off-by: David Arcari <darcari@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
Ming Lei [Fri, 10 Apr 2026 12:41:36 +0000 (20:41 +0800)]
ublk: fix tautological comparison warning in ublk_ctrl_reg_buf
On 32-bit architectures, 'unsigned long size' can never exceed
UBLK_SHMEM_BUF_SIZE_MAX (1ULL << 32), causing a tautological
comparison warning. Validate buf_reg.len (__u64) directly before
using it, and consolidate all input validation into a single check.
Also remove the unnecessary local variables 'addr' and 'size' since
buf_reg.addr and buf_reg.len can be used directly.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202604101952.3NOzqnu9-lkp@intel.com/ Fixes: 23b3b6f0b584 ("ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support") Signed-off-by: Ming Lei <tom.leiming@gmail.com> Link: https://patch.msgid.link/20260410124136.3983429-1-tom.leiming@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cássio Gabriel [Fri, 10 Apr 2026 03:54:33 +0000 (00:54 -0300)]
ALSA: sc6000: Restore board setup across suspend
snd_wss_resume() restores only the codec register image. The SC-6000
driver also programs card-specific DSP routing and enters MSS mode
during probe, and that setup is not replayed after suspend.
Cache the WSS chip pointer in the SC-6000 card state and wire ISA
suspend and resume callbacks to the shared board-programming helper,
so the board is reinitialized before the codec state is restored.
This keeps the old/new DSP split in one place and restores the
board-level MSS setup that the codec resume path does not cover.
Cássio Gabriel [Fri, 10 Apr 2026 03:54:32 +0000 (00:54 -0300)]
ALSA: sc6000: Keep the programmed board state in card-private data
The driver may auto-select IRQ and DMA resources at probe time, but
sc6000_init_board() still derives the SC-6000 soft configuration from
the module parameter arrays. When irq=auto or dma=auto is used, the
codec is created with the selected resources while the board is
programmed with the unresolved values.
Store the mapped ports and generated SC-6000 board configuration in
card-private data, build that configuration from the live probe
results instead of the raw module parameters, and keep the probe-time
board programming in a shared helper.
This fixes the resource-programming mismatch and leaves the driver
with a stable board-state block that can be reused by suspend/resume.
projects / thirdparty / kernel / linux.git / log
