When tls_set_device_offload_rx() fails at tls_dev_add(), the error path
calls tls_sw_free_resources_rx() to clean up the SW context that was
initialized by tls_set_sw_offload(). This function calls
tls_sw_release_resources_rx() (which stops the strparser via
tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context),
but never frees the anchor skb that was allocated by alloc_skb(0) in
tls_strp_init().
Note that tls_sw_free_resources_rx() is exclusively used for this
"failed to start offload" code path, there's no other caller.
The leak did not exist before commit 84c61fe1a75b ("tls: rx: do not use
the standard strparser"), because the standard strparser doesn't try
to pre-allocate an skb.
The normal close path in tls_sk_proto_close() handles cleanup by calling
tls_sw_strparser_done() (which calls tls_strp_done()) after dropping
the socket lock, because tls_strp_done() does cancel_work_sync() and
the strparser work handler takes the socket lock.
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20260428231559.1358502-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paul Chaignon [Thu, 30 Apr 2026 08:45:24 +0000 (10:45 +0200)]
selftests/bpf: Test insns processed breakdown
This patch covers in global subprog selftests the new verifier log with
the breakdown of instructions processed by global subprogs. The test
ensures the log line is present and that it has the right number of
subcounts.
Paul Chaignon [Thu, 30 Apr 2026 08:44:28 +0000 (10:44 +0200)]
bpf: Print breakdown of insns processed by subprogs
When using global functions (i.e. subprogs), the verifier performs
function-by-function verification. In that case, the sum of the
instructions processed in each global function and in the main program
counts towards the 1 million instructions limit. Only that sum is
reported in the verifier logs.
While starting to use global functions in Cilium (finally!), we found it
can be useful to have the breakdown per global function, to understand
exactly where the budget is currently spent. This patch implements this
breakdown, under BPF_LOG_STATS, as done for the stack depths.
When iterating over subprogs, we need to skip the hidden subprogs at the
end because they don't have a corresponding func_info_aux entry and
calling bpf_subprog_is_global() would result in an OOB access.
Maciej Falkowski [Wed, 29 Apr 2026 08:39:58 +0000 (10:39 +0200)]
MAINTAINERS: accel/ivpu: Remove myself and add Andrzej as maintainer
As I will be departing from my current position, I will
no longer maintain the driver, and remove myself from
ivpu's maintainers entry. Andrzej will support Karol
in maintaining the driver.
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Link: https://patch.msgid.link/20260429083958.2148777-1-maciej.falkowski@linux.intel.com
pinctrl: mediatek: eint: Drop base from mtk_eint_chip_write_mask()
When support for multiple EINT base addresses was added in commit 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple
addresses"), mtk_eint_chip_write_mask() was changed to write interrupt
masks for all base addresses in one call. However the "base" parameter
was left around and now causes sparse warnings:
Thomas Huth [Tue, 21 Apr 2026 11:30:12 +0000 (13:30 +0200)]
irqchip/gic: Replace __ASSEMBLY__ with __ASSEMBLER__
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a macro that
only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace and kernelspace
coding, or when dealing with uapi headers that rather should use
__ASSEMBLER__ instead.
Standardize now on the __ASSEMBLER__ macro that is provided by the
compilers.
irqchip/starfive: Implement irq_set_type() and irq_ack() callbacks
Add irq_set_type() callback to support configuring interrupt trigger types
(level high/low, edge rising/falling) for the JHB100 interrupt controller.
Also add irq_ack() callback as required by handle_edge_irq().
irqchip/starfive: Use devm_ interfaces to simplify resource release
Use devm_ interfaces to simplify resource release. Make clock and reset get
optional as they are not used on the JHB100 SoC. Replace pr_ logging with
dev_* logging. Use __free(kfree) cleanup attribute to auto-free irqc on
error paths
The StarFive JH8100 SoC was discontinued before production. The newly
taped-out JHB100 SoC uses the same interrupt controller IP. Rename the
driver file, Kconfig symbol, and internal references from "jh8100" to
"jhb100" to accurately reflect the supported hardware.
dt-bindings: interrupt-controller: Repurpose binding for unreleased jh8100 for jhb100
The StarFive JH8100 SoC was discontinued before production. The newly
taped-out JHB100 SoC uses the same interrupt controller IP.
Rename the binding file, compatible string, and MAINTAINERS entry from
"jh8100" to "jhb100". In JHB100 SoC, The clocks and resets are not operated
by users, but they exist in the hardware. Mark them as optional.
Ryan Chen [Tue, 7 Apr 2026 03:08:07 +0000 (11:08 +0800)]
irqchip/aspeed-intc: Remove AST2700-A0 support
The existing AST2700 interrupt controller driver ("aspeed,ast2700-intc-ic")
was written against the A0 pre-production design.
From A1 onwards (retained in the A2 production silicon), the interrupt
fabric was re-architected: interrupt routing is programmable and interrupt
outputs can be directed to multiple upstream controllers (PSP GIC,
Secondary Service Processor (SSP) NVIC, Tertiary Service Processor (TSP)
NVIC, and Boot MCU interrupt controller). This design requires route
resolution and a controller hierarchy model which the A0 driver cannot
represent.
Remove driver support for A0 in favour of the driver for the A2 production
design.
Ryan Chen [Tue, 7 Apr 2026 03:08:05 +0000 (11:08 +0800)]
irqchip/ast2700-intc: Add AST2700-A2 support
The AST2700 interrupt fabric is shared by multiple integrated processors
(PSP/SSP/TSP/BootMCU), each with its own interrupt controller and its own
devicetree view of the system. As a result, interrupt routing cannot be
treated as fixed: the valid route for a peripheral interrupt depends on
which processor is consuming it.
The INTC0 driver models this by creating a hierarchical irqdomain under
the upstream interrupt controller selected by the interrupt-parent
property in the devicetree. Information derived from this relationship
is incorporated into the route resolution logic for the controller.
The INTC1 driver implements the banked INTM-fed controller and forwards
interrupts toward INTC0, without embedding assumptions about the final
destination processor.
Ryan Chen [Tue, 7 Apr 2026 03:08:04 +0000 (11:08 +0800)]
dt-bindings: interrupt-controller: Describe AST2700-A2 hardware instead of A0
Introduce a new binding describing the AST2700 interrupt controller
architecture implemented in the A2 production silicon.
The AST2700 SoC has undergone multiple silicon revisions (A0, A1, A2)
prior to mass production. The interrupt architecture was substantially
reworked after the A0 revision for A1, and the A1 design is retained
unchanged in the A2 production silicon.
The existing AST2700 interrupt controller binding ("aspeed,ast2700-intc-ic")
was written against the pre-production A0 design.
That binding does not accurately describe the interrupt hierarchy and
routing model present in A1/A2, where interrupts can be routed to multiple
processor-local interrupt controllers (Primary Service Processor (PSP) GIC,
Secondary Service Processor (SSP)/Tertiary Service Processor (TSP) NVICs,
and BootMCU APLIC) depending on the execution context.
Remove the binding for the pre-production A0 design in favour of the
binding for the A2 production design. There is no significant user
impact from the removal as there are no existing devicetrees in any
of Linux, u-boot or Zephyr that make use of the A0 binding.
Hardware connectivity between interrupt controllers is expressed using
the aspeed,interrupt-ranges property.
A mbox rx channel is requested using mbox_request_channel_byname() in
probe. In remove callback, the rx mailbox channel is cleaned up when the
rx_chan is NULL due to incorrect condition check. The mailbox channel is
not shutdown and it can receive messages even after the device removal.
This leads to use after free. Also the channel resources are not freed.
Fix this by checking the rx_chan correctly.
soc: xilinx: Fix race condition in event registration
The zynqmp_power driver registers handlers for suspend and subsystem
restart events using register_event(). However, the work structures
(zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by
these handlers were allocated and initialized after the registration
call.
This created a race window where, if the firmware triggered an event
immediately after registration but before allocation, the callback
(suspend_event_callback or subsystem_restart_event_callback) would
dereference a NULL pointer in work_pending(), leading to a crash.
Fix this by allocating and initializing the work structures before
registering the events.
i3c: dw-i3c-master: Fix IBI count register selection for versalnet
On DesignWare I3C controllers where IC_HAS_IBI_DATA=0 (such as versalnet),
the IBI_STS_CNT field (bits [28:24] of QUEUE_STATUS_LEVEL) is hardwired
to 0. The IBI status entry count is instead reported via IBI_BUF_BLR
(bits [23:16] of the same register).
irq_handle_ibis() was unconditionally reading IBI_STS_CNT, causing it to
always see 0 pending IBIs on versalnet and return early without draining
the IBI buffer. Since INTR_IBI_THLD_STAT is level-triggered against the
buffer fill level, this left the interrupt permanently asserted.
Detect IBI data capability at probe time by writing the IBI data threshold
field in QUEUE_THLD_CTRL and reading it back. Use the result to select the
correct register field in irq_handle_ibis().
Replace mutex_init()/mutex_destroy() with drmm_mutex_init() for the
VRAM manager lock. This leverages DRM managed infrastructure to
automatically destroy the mutex during device teardown, eliminating
manual mutex_destroy() calls in both the normal fini path and the
gpu_buddy_init() error path.
i3c: master: Replace sprintf() with sysfs_emit() family
Replace sprintf() function calls with sysfs_emit() and
sysfs_emit_at() function calls where appropriate. This will help
harden the driver and help modernize it. While at it, add missing
newlines at the end of some sysfs_emit() (formerly sprintf()) calls.
Stanley Chu [Mon, 13 Apr 2026 00:50:40 +0000 (08:50 +0800)]
i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845
On NPCM845, when a target on the I3C bus gets stuck holding SDA low,
the controller reports a false Master Request (MR) in-band interrupt
event. The driver handles this by emitting a STOP condition to restore
the bus.
However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that
emitting a STOP condition may spuriously set the SLVSTART interrupt
status bit. In the Master Request case, this creates a feedback loop:
the STOP triggers a new SLVSTART event, the IRQ handler fires again,
the controller still reports an MR type, another STOP is emitted, and
the cycle repeats indefinitely, resulting in an IRQ storm that can lock
up the CPU.
Clear the SLVSTART status bit explicitly after emitting the STOP in the
Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk
is set. This breaks the feedback loop without affecting normal SLVSTART
processing, which is already guarded in the top-level IRQ handler by
checking that MSTATUS is in SLVREQ state.
Stanley Chu [Mon, 13 Apr 2026 00:50:39 +0000 (08:50 +0800)]
i3c: master: svc: Fix missed IBI after false SLVSTART on NPCM845
The NPCM845 I3C controller may raise a false SLVSTART interrupt. The
handler first latches MSTATUS and then clears SLVSTART. If a real IBI
request arrives after the handler latches MSTATUS but before it clears
the SLVSTART interrupt status, HW sets the SLVREQ state. However, the
handler still relies on the stale MSTATUS snapshot, returns early, and
misses the real IBI. No further interrupt is generated for this pending
IBI.
Re-read MSTATUS to obtain the latest state and avoid missing a real IBI
due to this race condition.
Fixes: 4dd12e944f07 ("i3c: master: svc: Fix npcm845 invalid slvstart event") Signed-off-by: Stanley Chu <yschu@nuvoton.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260413005040.1211107-2-yschu@nuvoton.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
====================
Intel Wired LAN Update 2026-04-27 (ice, iavf)
Petr Oros from RedHat has accumulated a number of fixes for the Intel ice
and iavf drivers, bundled together in this series.
First, a series of 4 fixes to resolve issues with the iavf driver logic for
handling VLAN filters. This includes keeping VLAN filters while the
interface is brought down, waiting for confirmation on filter deletion
before deleting filters from the driver tracking structures, and handling
the VIRTCHNL_OP_ADD_VLAN for the old v1 VLAN_ADD command.
A fix for a crash in ice_reset_all_vfs(), properly checking for errors when
ice_vf_rebuild_vsi() fails.
A fix for a possible infinite recursion in ice_cfg_tx_topo() that occurs
when trying to apply invalid Tx topology configuration.
A fix to initialize the SMA pins in the DPLL subsystem properly.
A fix to change the SMA and U.FL pin state for paired pins, ensuring that
all flows changing one pin will also update its shared pin appropriately.
A preparatory patch to export __dpll_pin_change_ntf() so that drivers can
notify pin changes while already holding the dpll_lock.
A fix to ensure DPLL notifications are sent for the software-controlled
pins which wrap the physical CGU input/output pins.
A fix to add DPLL notifications for peer pins when changing the SMA or U.FL
pins, ensuring DPLL subsystem is notified about the paired connected pins.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Petr Oros [Tue, 28 Apr 2026 05:22:23 +0000 (22:22 -0700)]
ice: add dpll peer notification for paired SMA and U.FL pins
SMA and U.FL pins share physical signal paths in pairs (SMA1/U.FL1 and
SMA2/U.FL2). When one pin's state changes via a PCA9575 GPIO write,
the paired pin's state also changes, but no notification is sent for
the peer pin. Userspace consumers monitoring the peer via dpll netlink
subscribe never learn about the update.
Add ice_dpll_sw_pin_notify_peer() which sends a change notification for
the paired SW pin. Call it from ice_dpll_pin_sma_direction_set(),
ice_dpll_sma_pin_state_set(), and ice_dpll_ufl_pin_state_set() after
pf->dplls.lock is released. Use __dpll_pin_change_ntf() because
dpll_lock is still held by the dpll netlink layer (dpll_pin_pre_doit).
Fixes: 2dd5d03c77e2 ("ice: redesign dpll sma/u.fl pins control") Signed-off-by: Petr Oros <poros@redhat.com> Tested-by: Alexander Nowlin <alexander.nowlin@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-11-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Oros [Tue, 28 Apr 2026 05:22:22 +0000 (22:22 -0700)]
ice: fix missing dpll notifications for SW pins
The SMA/U.FL pin redesign (commit 2dd5d03c77e2 ("ice: redesign dpll
sma/u.fl pins control")) introduced software-controlled pins that wrap
backing CGU input/output pins, but never updated the notification and
data paths to propagate pin events to these SW wrappers.
The periodic work sends dpll_pin_change_ntf() only for direct CGU input
pins. SW pins that wrap these inputs never receive change or phase
offset notifications, so userspace consumers such as synce4l monitoring
SMA pins via dpll netlink never learn about state transitions or phase
offset updates. Similarly, ice_dpll_phase_offset_get() reads the SW
pin's own phase_offset field which is never updated; the PPS monitor
writes to the backing CGU input's field instead.
Fix by introducing ice_dpll_pin_ntf(), a wrapper around
dpll_pin_change_ntf() that also notifies any registered SMA/U.FL pin
whose backing CGU input matches. Replace all direct
dpll_pin_change_ntf() calls in the periodic notification paths with
this wrapper. Fix ice_dpll_phase_offset_get() to return the backing
CGU input's phase_offset for input-direction SW pins.
Fixes: 2dd5d03c77e2 ("ice: redesign dpll sma/u.fl pins control") Signed-off-by: Petr Oros <poros@redhat.com> Tested-by: Alexander Nowlin <alexander.nowlin@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-10-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ivan Vecera [Tue, 28 Apr 2026 05:22:21 +0000 (22:22 -0700)]
dpll: export __dpll_pin_change_ntf() for use under dpll_lock
Export __dpll_pin_change_ntf() so that drivers can send pin change
notifications from within pin callbacks, which are already called
under dpll_lock. Using dpll_pin_change_ntf() in that context would
deadlock.
Add lockdep_assert_held() to catch misuse without the lock held.
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Petr Oros <poros@redhat.com> Tested-by: Alexander Nowlin <alexander.nowlin@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-9-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Oros [Tue, 28 Apr 2026 05:22:20 +0000 (22:22 -0700)]
ice: fix SMA and U.FL pin state changes affecting paired pin
SMA and U.FL pins share physical signal paths in pairs (SMA1/U.FL1 and
SMA2/U.FL2) controlled by the PCA9575 GPIO expander. Each pair can
only have one active pin at a time: SMA1 output and U.FL1 output share
the same CGU output, SMA2 input and U.FL2 input share the same CGU
input. The PCA9575 register bits determine which connector in each
pair owns the signal path.
The driver does not account for this pairing in two places:
ice_dpll_ufl_pin_state_set() modifies PCA9575 bits and disables the
backing CGU pin without checking whether the U.FL pin is currently
active. Disconnecting an already inactive U.FL pin flips bits that
the paired SMA pin relies on, breaking its connection.
ice_dpll_sma_direction_set() does not propagate direction changes to
the paired U.FL pin. For SMA2/U.FL2 the ICE_SMA2_UFL2_RX_DIS bit is
never managed, so U.FL2 stays disconnected after SMA2 switches to
output. For both pairs the backing CGU pin of the U.FL side is never
enabled when a direction change activates it, so userspace sees the
pin as disconnected even though the routing is correct.
Fix by guarding the U.FL disconnect path against inactive pins and by
updating the paired U.FL pin fully on SMA direction changes: manage
ICE_SMA2_UFL2_RX_DIS for the SMA2/U.FL2 pair and enable the backing
CGU pin whenever the peer becomes active.
Fixes: 2dd5d03c77e2 ("ice: redesign dpll sma/u.fl pins control") Signed-off-by: Petr Oros <poros@redhat.com> Tested-by: Alexander Nowlin <alexander.nowlin@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-8-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Oros [Tue, 28 Apr 2026 05:22:19 +0000 (22:22 -0700)]
ice: fix missing SMA pin initialization in DPLL subsystem
The DPLL SMA/U.FL pin redesign introduced ice_dpll_sw_pin_frequency_get()
which gates frequency reporting on the pin's active flag. This flag is
determined by ice_dpll_sw_pins_update() from the PCA9575 GPIO expander
state. Before the redesign, SMA pins were exposed as direct HW
input/output pins and ice_dpll_frequency_get() returned the CGU
frequency unconditionally — the PCA9575 state was never consulted.
The PCA9575 powers on with all outputs high, setting ICE_SMA1_DIR_EN,
ICE_SMA1_TX_EN, ICE_SMA2_DIR_EN and ICE_SMA2_TX_EN. Nothing in the
driver writes the register during initialization, so
ice_dpll_sw_pins_update() sees all pins as inactive and
ice_dpll_sw_pin_frequency_get() permanently returns 0 Hz for every
SW pin.
Fix this by writing a default SMA configuration in
ice_dpll_init_info_sw_pins(): clear all SMA bits, then set SMA1 and
SMA2 as active inputs (DIR_EN=0) with U.FL1 output and U.FL2 input
disabled. Each SMA/U.FL pair shares a physical signal path so only
one pin per pair can be active at a time. U.FL pins still report
frequency 0 after this fix: U.FL1 (output-only) is disabled by
ICE_SMA1_TX_EN which keeps the TX output buffer off, and U.FL2
(input-only) is disabled by ICE_SMA2_UFL2_RX_DIS. They can be
activated by changing the corresponding SMA pin direction via dpll
netlink.
Fixes: 2dd5d03c77e2 ("ice: redesign dpll sma/u.fl pins control") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Alexander Nowlin <alexander.nowlin@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-7-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Oros [Tue, 28 Apr 2026 05:22:18 +0000 (22:22 -0700)]
ice: fix infinite recursion in ice_cfg_tx_topo via ice_init_dev_hw
On certain E810 configurations where firmware supports Tx scheduler
topology switching (tx_sched_topo_comp_mode_en), ice_cfg_tx_topo()
may need to apply a new 5-layer or 9-layer topology from the DDP
package. If the AQ command to set the topology fails (e.g. due to
invalid DDP data or firmware limitations), the global configuration
lock must still be cleared via a CORER reset.
Commit 86aae43f21cf ("ice: don't leave device non-functional if Tx
scheduler config fails") correctly fixed this by refactoring
ice_cfg_tx_topo() to always trigger CORER after acquiring the global
lock and re-initialize hardware via ice_init_hw() afterwards.
However, commit 8a37f9e2ff40 ("ice: move ice_deinit_dev() to the end
of deinit paths") later moved ice_init_dev_hw() into ice_init_hw(),
breaking the reinit path introduced by 86aae43f21cf. This creates an
infinite recursive call chain:
Fix by moving ice_init_dev_hw() back out of ice_init_hw() and calling
it explicitly from ice_probe() and ice_devlink_reinit_up(). The third
caller, ice_cfg_tx_topo(), intentionally does not need ice_init_dev_hw()
during its reinit, it only needs the core HW reinitialization. This
breaks the recursion cleanly without adding flags or guards.
The deinit ordering changes from commit 8a37f9e2ff40 ("ice: move
ice_deinit_dev() to the end of deinit paths") which fixed slow rmmod
are preserved, only the init-side placement of ice_init_dev_hw() is
reverted.
Fixes: 8a37f9e2ff40 ("ice: move ice_deinit_dev() to the end of deinit paths") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Alexander Nowlin <alexander.nowlin@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-6-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Oros [Tue, 28 Apr 2026 05:22:17 +0000 (22:22 -0700)]
ice: fix NULL pointer dereference in ice_reset_all_vfs()
ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi().
When the VSI rebuild fails (e.g. during NVM firmware update via
nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path,
leaving txq_map and rxq_map as NULL. The subsequent unconditional call
to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in
ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0].
The single-VF reset path in ice_reset_vf() already handles this
correctly by checking the return value of ice_vf_reconfig_vsi() and
skipping ice_vf_post_vsi_rebuild() on failure.
Apply the same pattern to ice_reset_all_vfs(): check the return value
of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and
ice_eswitch_attach_vf() on failure. The VF is left safely disabled
(ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can
be recovered via a VFLR triggered by a PCI reset of the VF
(sysfs reset or driver rebind).
Note that this patch does not prevent the VF VSI rebuild from failing
during NVM update — the underlying cause is firmware being in a
transitional state while the EMP reset is processed, which can cause
Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This
patch only prevents the subsequent NULL pointer dereference that
crashes the kernel when the rebuild does fail.
dmesg:
ice 0000:13:00.0: firmware recommends not updating fw.mgmt, as it
may result in a downgrade. continuing anyways
ice 0000:13:00.1: ice_init_nvm failed -5
ice 0000:13:00.1: Rebuild failed, unload and reload driver
Petr Oros [Tue, 28 Apr 2026 05:22:16 +0000 (22:22 -0700)]
iavf: add VIRTCHNL_OP_ADD_VLAN to success completion handler
The V1 ADD_VLAN opcode had no success handler; filters sent via V1
stayed in ADDING state permanently. Add a fallthrough case so V1
filters also transition ADDING -> ACTIVE on PF confirmation.
Critically, add an `if (v_retval) break` guard: the error switch in
iavf_virtchnl_completion() does NOT return after handling errors,
it falls through to the success switch. Without this guard, a
PF-rejected ADD would incorrectly mark ADDING filters as ACTIVE,
creating a driver/HW mismatch where the driver believes the filter
is installed but the PF never accepted it.
For V2, this is harmless: iavf_vlan_add_reject() in the error
block already kfree'd all ADDING filters, so the success handler
finds nothing to transition.
Fixes: 968996c070ef ("iavf: Fix VLAN_V2 addition/rejection") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-4-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Oros [Tue, 28 Apr 2026 05:22:15 +0000 (22:22 -0700)]
iavf: wait for PF confirmation before removing VLAN filters
The VLAN filter DELETE path was asymmetric with the ADD path: ADD
waits for PF confirmation (ADD -> ADDING -> ACTIVE), but DELETE
immediately frees the filter struct after sending the DEL message
without waiting for the PF response.
This is problematic because:
- If the PF rejects the DEL, the filter remains in HW but the driver
has already freed the tracking structure, losing sync.
- Race conditions between DEL pending and other operations
(add, reset) cannot be properly resolved if the filter struct
is already gone.
Add IAVF_VLAN_REMOVING state to make the DELETE path symmetric:
In iavf_del_vlans(), transition filters from REMOVE to REMOVING
instead of immediately freeing them. The new DEL completion handler
in iavf_virtchnl_completion() frees filters on success or reverts
them to ACTIVE on error.
Update iavf_add_vlan() to handle the REMOVING state: if a DEL is
pending and the user re-adds the same VLAN, queue it for ADD so
it gets re-programmed after the PF processes the DEL.
The !VLAN_FILTERING_ALLOWED early-exit path still frees filters
directly since no PF message is sent in that case.
Also update iavf_del_vlan() to skip filters already in REMOVING
state: DEL has been sent to PF and the completion handler will
free the filter when PF confirms. Without this guard, the sequence
DEL(pending) -> user-del -> second DEL could cause the PF to return
an error for the second DEL (filter already gone), causing the
completion handler to incorrectly revert a deleted filter back to
ACTIVE.
Fixes: 968996c070ef ("iavf: Fix VLAN_V2 addition/rejection") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-3-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Oros [Tue, 28 Apr 2026 05:22:14 +0000 (22:22 -0700)]
iavf: stop removing VLAN filters from PF on interface down
When a VF goes down, the driver currently sends DEL_VLAN to the PF for
every VLAN filter (ACTIVE -> DISABLE -> send DEL -> INACTIVE), then
re-adds them all on UP (INACTIVE -> ADD -> send ADD -> ADDING ->
ACTIVE). This round-trip is unnecessary because:
1. The PF disables the VF's queues via VIRTCHNL_OP_DISABLE_QUEUES,
which already prevents all RX/TX traffic regardless of VLAN filter
state.
2. The VLAN filters remaining in PF HW while the VF is down is
harmless - packets matching those filters have nowhere to go with
queues disabled.
3. The DEL+ADD cycle during down/up creates race windows where the
VLAN filter list is incomplete. With spoofcheck enabled, the PF
enables TX VLAN filtering on the first non-zero VLAN add, blocking
traffic for any VLANs not yet re-added.
Remove the entire DISABLE/INACTIVE state machinery:
- Remove IAVF_VLAN_DISABLE and IAVF_VLAN_INACTIVE enum values
- Remove iavf_restore_filters() and its call from iavf_open()
- Remove VLAN filter handling from iavf_clear_mac_vlan_filters(),
rename it to iavf_clear_mac_filters()
- Remove DEL_VLAN_FILTER scheduling from iavf_down()
- Remove all DISABLE/INACTIVE handling from iavf_del_vlans()
VLAN filters now stay ACTIVE across down/up cycles. Only explicit
user removal (ndo_vlan_rx_kill_vid) or PF/VF reset triggers VLAN
filter deletion/re-addition.
Fixes: ed1f5b58ea01 ("i40evf: remove VLAN filters on close") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-2-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Oros [Tue, 28 Apr 2026 05:22:13 +0000 (22:22 -0700)]
iavf: rename IAVF_VLAN_IS_NEW to IAVF_VLAN_ADDING
Rename the IAVF_VLAN_IS_NEW state to IAVF_VLAN_ADDING to better
describe what the state represents: an ADD request has been sent to
the PF and is waiting for a response.
This is a pure rename with no behavioral change, preparing for a
cleanup of the VLAN filter state machine.
Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-1-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
drm: renesas: shmobile: remove now-redundant call to drm_connector_attach_encoder()
shmob_drm_connector_create() can init the connector in two ways, based on
the 'if (sdev->pdata)':
1. manually in shmob_drm_connector_create(), or
2. delegating to drm_bridge_connector_init()
Whichever branch is taken, drm_connector_attach_encoder() is called
immediately after to attach the connector to the encoder.
Now drm_bridge_connector_init() calls drm_connector_attach_encoder() on the
connector so it is not needed anymore in case 2 and should be removed, but
it is still needed in case 1. Move drm_connector_attach_encoder() from the
common path to inside shmob_drm_connector_create() in order to get back to
a single drm_connector_attach_encoder() in both cases.
This series is targeting net-next for 7.2. To make this series
self-contained in the networking code, I dropped the patches that remove
support for transformation cloning from the crypto API, which is a
further negative 275-line cleanup and optimization this series enables.
That will be done as a follow-up, either through the crypto tree for
7.3, or still through net-next for 7.2 at maintainer preference.
This series refactors the TCP-AO (TCP Authentication Option) code to do
MAC and KDF computations using lib/crypto/ instead of crypto_ahash.
This greatly simplifies the code and makes it much more efficient. The
entire tcp_sigpool mechanism becomes unnecessary and is removed, as the
problems it was designed to solve don't exist with the library APIs.
The crypto API's support for crypto transformation cloning also becomes
unnecessary and will be removed in follow-up patches. Note that as part
of that, we'll be able to roll back the addition of the reference count
to crypto_tfm, which had regressed performance for all crypto API users.
To make this simplification and optimization possible, this series also
updates the TCP-AO code to support a specific set of algorithms, rather
than arbitrary algorithms that don't make sense and are very likely not
being used, e.g. CRC-32 and HMAC-MD5.
Specifically, this series retains the support for AES-128-CMAC,
HMAC-SHA1, and HMAC-SHA256. AES-128-CMAC and HMAC-SHA1 are the only
algorithms that are actually standardized for use in TCP-AO, while
HMAC-SHA256 makes sense to continue supporting as a Linux extension. Of
course, other algorithms can still be (re-)added later if ever needed.
It's worth noting that TCP-AO MACs are limited to 20 bytes by the TCP
options space, which limits the benefit of further algorithm upgrades.
This series passes the tcp_ao selftests
(sudo make -C tools/testing/selftests/net/tcp_ao/ run_tests).
To get a sense for how much more efficient this makes the TCP-AO code,
here's a microbenchmark for tcp_ao_hash_skb() with skb->len == 128:
Eric Biggers [Mon, 27 Apr 2026 17:27:27 +0000 (10:27 -0700)]
net/tcp: Remove tcp_sigpool
tcp_sigpool is no longer used. It existed only as a workaround for
issues in the design of the crypto_ahash API, which have been avoided by
switching to the much easier-to-use library APIs instead. Remove it.
Eric Biggers [Mon, 27 Apr 2026 17:27:26 +0000 (10:27 -0700)]
net/tcp-ao: Return void from functions that can no longer fail
Since tcp-ao now uses the crypto library API instead of crypto_ahash,
and MACs and keys now have a statically-known maximum size, many tcp-ao
functions can no longer fail. Propagate this change up into the return
types of various functions.
Eric Biggers [Mon, 27 Apr 2026 17:27:25 +0000 (10:27 -0700)]
net/tcp-ao: Use stack-allocated MAC and traffic_key buffers
Now that the maximum MAC and traffic key lengths are statically-known
small values, allocate MACs and traffic keys on the stack instead of
with kmalloc. This eliminates multiple failure-prone GFP_ATOMIC
allocations.
Note that some cases such as tcp_ao_prepare_reset() are left unchanged
for now since they would require slightly wider changes.
Eric Biggers [Mon, 27 Apr 2026 17:27:24 +0000 (10:27 -0700)]
net/tcp-ao: Use crypto library API instead of crypto_ahash
Currently the kernel's TCP-AO implementation does the MAC and KDF
computations using the crypto_ahash API. This API is inefficient and
difficult to use, and it has required extensive workarounds in the form
of per-CPU preallocated objects (tcp_sigpool) to work at all.
Let's use lib/crypto/ instead. This means switching to straightforward
stack-allocated structures, virtually addressed buffers, and direct
function calls. It also means removing quite a bit of error handling.
This makes TCP-AO quite a bit faster.
This also enables many additional cleanups, which later commits will
handle: removing tcp-sigpool, removing support for crypto_tfm cloning,
removing more error handling, and replacing more dynamically-allocated
buffers with stack buffers based on the now-statically-known limits.
Eric Biggers [Mon, 27 Apr 2026 17:27:23 +0000 (10:27 -0700)]
net/tcp-ao: Drop support for most non-RFC-specified algorithms
RFC 5926 (https://datatracker.ietf.org/doc/html/rfc5926) specifies the
use of AES-128-CMAC and HMAC-SHA1 with TCP-AO. This includes a
specification for how traffic keys shall be derived for each algorithm.
Support for any other algorithms with TCP-AO isn't standardized, though
an expired Internet Draft (a work-in-progress document, not a standard)
from 2019 does propose adding HMAC-SHA256 support:
https://datatracker.ietf.org/doc/html/draft-nayak-tcp-sha2-03
Since both documents specify the KDF for each algorithm individually, it
isn't necessarily clear how any other algorithm should be integrated.
Nevertheless, the Linux implementation of TCP-AO allows userspace to
specify the MAC algorithm as a string tcp_ao_add::alg_name naming either
"cmac(aes128)" or an arbitrary algorithm in the crypto_ahash API. The
set of valid strings is undocumented. The implementation assumes that
"cmac(aes128)" is the only algorithm that requires an entropy extraction
step and that all algorithms accept keys with length equal to the
untruncated MAC; thus, arbitrary HMAC algorithms probably do work, but
some other MAC algorithms like AES-256-CMAC have never actually worked.
Unfortunately, this undocumented string allows many obsolete, insecure,
or redundant algorithms. For example, "hmac(md5)" and the
non-cryptographic "crc32" are accepted. It also ties the implementation
to crypto_ahash and requires that most memory be dynamically allocated,
making the implementation unnecessarily complex and inefficient. Still
furthermore, this implementation requires the crypto API to support
"transformation cloning", whose only user is this feature.
Fortunately, it's very likely that only a few algorithms are actually
used in practice. Let's restrict the set of allowed algorithms to
"cmac(aes128)" (or "cmac(aes)" with keylen=16), "hmac(sha1)", and
"hmac(sha256)". The first two are the actually standard ones, while
HMAC-SHA256 seems like a reasonable algorithm to continue supporting as
a Linux extension, considering the Internet Draft for it and the fact
that SHA-256 is the usual choice of upgrade from the outdated SHA-1.
If any other algorithm ever turns out to be needed, e.g. HMAC-SHA512, it
can of course be (re-)added in library form. However, note that the TCP
options space limits TCP-AO MACs to 20 bytes (160 bits) anyway, which
limits the potential benefit of any further upgrade to the algorithm.
drm/i915/psr: Disable Panel Replay on Dell XPS 16 DA16260 as a quirk
We are observing same problems with Dell XPS 16 DA16260 as we saw with XPS
14 DA16260. This device seem to have also LGD panel with same feature as in
XPS 14. Due to this disable Panel Replay as a quirk on this setup as well.
parisc: Fix build failure for 32-bit kernel with PA2.0 instruction set
The CONFIG_PA11 option can not be used as a reliable check if we build a
32-bit kernel which needs the 32-bit VDSO.
Instead depend on CONFIG_64BIT and CONFIG_COMPAT only.
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by: Helge Deller <deller@gmx.de>
Petr Tesarik [Fri, 10 Apr 2026 11:35:06 +0000 (13:35 +0200)]
dma-direct: fix use of max_pfn
Calculate the correct physical address of the last byte of memory. Since
max_pfn is in fact "the PFN of the first page after the highest system RAM
in physical address space", the highest address that might be used for a
DMA buffer is one byte below max_pfn << PAGE_SHIFT.
This fix is unlikely to make any difference in practice. It's just that the
current formula is slightly confusing.
Randy Dunlap [Wed, 29 Apr 2026 22:57:51 +0000 (15:57 -0700)]
ASoC: docs: fix TAS675x doc build warnings
Add tas675x.rst to the index file and extend the heading underline
to avoid build warnings:
Documentation/sound/codecs/tas675x.rst: WARNING: document isn't included in any toctree [toc.not_included]
Documentation/sound/codecs/tas675x.rst:659: WARNING: Title underline too short.
Overtemperature Shutdown (0x87)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [docutils]
netfilter: nf_tables: fix netdev hook allocation memleak with dormant tables
sashiko says:
could the related code in __nf_tables_abort() leak the struct nft_hook objects when the table is dormant?
In __nf_tables_abort(), when rolling back a NEWCHAIN transaction that
updates hooks, the code conditionally unregisters and frees the hooks only
if the table is not dormant [..]
if (!(table->flags & NFT_TABLE_F_DORMANT)) {
nft_netdev_unregister_hooks(net,
&nft_trans_chain_hooks(trans),
true);
}
...
nft_trans_destroy(trans);
Unfortunately netdev family mixes hook registration and allocation.
Push table struct down and only check for the flag to unregister.
Fixes: 216e7bf7402c ("netfilter: nf_tables: skip netdev hook unregistration if table is dormant") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: xt_CT: fix usersize for v1 and v2 revision
While resurrecting the conntrack-tool test cases I found following bug:
In:
iptables -I OUTPUT -t raw -p 13 -j CT --timeout test-generic
Out:
[0:0] -A OUTPUT -p 13 -j CT --timeout test
Data after first four bytes of the timeout policy name is never
copied to userspace because its treated as kernel-only.
Fixes: ec2318904965 ("xtables: extend matches and targets with .usersize") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add initial support for correctable error handling which is serviced
using system controller event. Currently we only log the errors in
dmesg but this serves as a foundation for RAS infrastructure and will
be further extended to facilitate other RAS features.
drm/xe/sysctrl: Add system controller event support
System controller reports different types of events to GFX endpoint for
different usecases, add initial support for them. This will be further
extended to service those usecases.
drm/xe/sysctrl: Add system controller interrupt handler
Add system controller interrupt handler which is denoted by 11th bit in
GFX master interrupt register. While at it, add worker for scheduling
system controller work.
Merge tag 'trace-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix inverted check of registering the stats for branch tracing
When calling register_stat_tracer() which returns zero on success and
negative on error, the callers were checking the return of zero as an
error and printing a warning message. Because this was just a normal
printk() message and not a WARN(), it wasn't caught in any testing.
Fix the check to print the warning message when an error actually
happens.
- Fix a typo in a comment in tracepoint.h
- Limit the size of event probes to 3K in size
It is possible to create a dynamic event probe via the tracefs system
that is greater than the max size of an event that the ring buffer
can hold. This basically causes the event to become useless.
Limit the size of an event probe to be 3K as that should be large
enough to handle any dynamic events being created, and fits within
the PAGE_SIZE sub-buffers of the ring buffer.
* tag 'trace-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Limit size of event probe to 3K
tracepoint: Fix typo in tracepoint.h comment
tracing: branch: Fix inverted check on stat tracer registration
regulator: rpi-panel-attiny: add back GPIOLIB dependency
This driver provides a gpio chip, which is only possible when GPIOLIB
is enabled, which was previously guaranteed by the CONFIG_OF_GPIO
dependency that is now gone:
riscv: Define __riscv_copy_{,vec_}{words,bytes}_unaligned() using SYM_TYPED_FUNC_START
After commit 67bdd7b01387 ("riscv: Split out measure_cycles() for
reuse") and commit c03ad15f7cf6 ("riscv: Reuse measure_cycles() in
check_vector_unaligned_access()"), there are CFI failure when booting
kernels with CONFIG_CFI=y:
CFI failure at measure_cycles+0x38/0xe0 (target: __riscv_copy_words_unaligned+0x0/0x50; expected type: ...)
CFI failure at measure_cycles+0x38/0xe0 (target: __riscv_copy_vec_words_unaligned+0x0/0x24; expected type: ...)
The __riscv_copy_*_unaligned() functions are now called indirectly but
they are not defined with SYM_TYPED_FUNC_START, which is required for
assembly functions called indirectly from C to pass CFI checking. Switch
to SYM_TYPED_FUNC_START to clear up the CFI failures.
Fixes: 67bdd7b01387 ("riscv: Split out measure_cycles() for reuse") Fixes: c03ad15f7cf6 ("riscv: Reuse measure_cycles() in check_vector_unaligned_access()") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nam Cao <namcao@linutronix.de> Link: https://patch.msgid.link/20260406-measure_cycles-cfi-failure-v1-1-03e0234ae02f@kernel.org Signed-off-by: Paul Walmsley <pjw@kernel.org>
Hasan Basbunar [Tue, 28 Apr 2026 17:07:39 +0000 (19:07 +0200)]
page_pool: fix memory-provider leak in page_pool_create_percpu() error path
When page_pool_create_percpu() fails on page_pool_list(), it falls
through to its err_uninit: label, which calls page_pool_uninit().
At that point page_pool_init() has already taken two references
when the user requested PP_FLAG_ALLOW_UNREADABLE_NETMEM:
Neither is undone by page_pool_uninit(); both are only undone by
__page_pool_destroy() (success-side teardown). The error path
therefore leaks the per-provider reference taken by mp_ops->init
(io_zcrx_ifq->refs in the io_uring zcrx provider, the dmabuf
binding refcount in the devmem provider) plus one increment of
the page_pool_mem_providers static branch on every failure of
xa_alloc_cyclic() inside page_pool_list().
The leaked io_zcrx_ifq->refs in turn pins everything
io_zcrx_ifq_free() would release on cleanup: ifq->user (uid),
ifq->mm_account (mmdrop), ifq->dev (device refcount),
ifq->netdev_tracker (netdev refcount), and the rbuf region.
The leaked static branch increment forces all subsequent
page_pool_alloc_netmems() and page_pool_return_page() callers to
take the slow mp_ops branch for the lifetime of the kernel.
The same shape applies to the devmem dmabuf provider via
mp_dmabuf_devmem_init()/mp_dmabuf_devmem_destroy().
Restore the cleanup symmetry by moving the mp_ops->destroy() and
static_branch_dec() calls out of __page_pool_destroy() and into
page_pool_uninit(), so page_pool_uninit() is again the strict
inverse of page_pool_init(). page_pool_uninit() has only two
callers (the err_uninit: path and __page_pool_destroy()), so this
preserves the single-call invariant on the success path while
fixing the err path. The error path of page_pool_init() itself
still skips the mp_ops cleanup correctly: mp_ops->init is the
last action that takes a reference before page_pool_init() returns
0, so when it returns an error neither the refcount nor the static
branch has been touched.
Triggering the bug requires xa_alloc_cyclic() to fail with -ENOMEM,
which under normal GFP_KERNEL retry behaviour is rare. It is
deterministic under CONFIG_FAULT_INJECTION with fail_page_alloc /
xa fault injection, or under sustained memory pressure. The leak
is silent: there is no warning, and the released kernel build
continues running with a permanently-incremented static branch.
projects / thirdparty / kernel / linux.git / log
