Add ZT trace bus and ZTR trace clocks on R-Mobile A1.
These clocks supply the coresight tracing modules, PTM, TPIU, ETB and
replicator. Without these clock, coresight tracing can not be operated.
Enable the Gigabit Ethernet Interfaces (GBETH0) populated on the RZ/G3L
SMARC EVK. The eth1, pincontrol definitions and hotplug support will be
added later.
Biju Das [Thu, 26 Mar 2026 11:19:49 +0000 (11:19 +0000)]
arm64: dts: renesas: r9a08g046: Add GBETH nodes
Renesas RZ/G3L SoC is equipped with 2x Synopsys DesignWare Ethernet
(10/100/1000 BASE) with TSN, IP block version 5.30. Add GBETH nodes
to R9A08G046 RZ/G3L SoC DTSI.
Rong Zhang [Thu, 30 Apr 2026 18:45:23 +0000 (02:45 +0800)]
PCI: loongson: Do not ignore downstream devices on external bridges
Loongson PCI host controllers have a hardware quirk that requires
software to ignore downstream devices with device number > 0 on the
internal bridges. The current implementation applies the workaround to
all non-root buses, which breaks external bridges (e.g., PCIe switches)
with multiple downstream devices.
Fix it by only applying the workaround to internal bridges.
Tested on Loongson-LS3A4000-7A1000-NUC-SE, using AMD Promontory 21
chipset add-in card [1].
Valery Borovsky [Mon, 11 May 2026 17:12:11 +0000 (20:12 +0300)]
media: sun4i-csi: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
sun4i_csi_start_streaming() returned -EINVAL when no matching CSI
format could be found, before any setup (scratch buffer allocation,
pipeline start) had been performed. The remaining error paths already
converge on the err_clear_dma_queue label, which calls
return_all_buffers(..., VB2_BUF_STATE_QUEUED) under csi->qlock. Jump
to that label directly: the intermediate err_disable_device /
err_disable_pipeline / err_free_scratch_buffer labels are skipped,
which is correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
Valery Borovsky [Mon, 11 May 2026 17:12:10 +0000 (20:12 +0300)]
media: stm32-dcmipp: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
dcmipp_bytecap_start_streaming() returned -EINVAL when the source
subdevice could not be resolved from the media graph, before
pm_runtime_resume_and_get() and media_pipeline_start() had been called.
The remaining error paths already converge on the err_buffer_done
label, which calls dcmipp_bytecap_all_buffers_done(...,
VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate
err_pm_put / err_media_pipeline_stop labels are skipped, which is
correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
Fixes: 28e0f3772296 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver") Cc: stable@vger.kernel.org Signed-off-by: Valery Borovsky <vebohr@gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Valery Borovsky [Mon, 11 May 2026 17:12:09 +0000 (20:12 +0300)]
media: rtl2832_sdr: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
rtl2832_sdr_start_streaming() had multiple error paths that hit this
trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six
`goto err` paths covering subdev s_power, tuner setup, ADC setup,
stream-buffer allocation, urb allocation, and urb submission failures.
None of them returned the queued buffers.
The original function had no distinct success exit and fell straight
through into the err label, which previously only did mutex_unlock and
"return ret". Adding queued-buffer cleanup at err must therefore be
paired with an explicit success return; otherwise every successful
start would also drain the buffer queue and kill streaming. Add that
success return, then add rtl2832_sdr_cleanup_queued_bufs() at the err
label and before each early return.
The cleanup helper takes a vb2_buffer_state argument so that the
start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as
expected by userspace on start_streaming failure) while stop_streaming
keeps its existing VB2_BUF_STATE_ERROR semantics.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
The err label still does not roll back power_ctrl(), frontend_ctrl(),
the POWER_ON flag, or stream/URB allocations that may have happened
before the failing step. Those are pre-existing leaks of a different
class and are not addressed here.
Valery Borovsky [Mon, 11 May 2026 17:12:08 +0000 (20:12 +0300)]
media: pwc: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
pwc's start_streaming() had two early returns that hit this trap:
-ENODEV when the USB device was already disconnected, and -ERESTARTSYS
when mutex_lock_interruptible() was interrupted by a signal. Call the
existing pwc_cleanup_queued_bufs() helper with VB2_BUF_STATE_QUEUED
before returning (matching the state already used by the
pwc_isoc_init() error path in the same function).
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
Valery Borovsky [Mon, 11 May 2026 17:12:07 +0000 (20:12 +0300)]
media: msi2500: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
msi2500_start_streaming() had five error paths that all hit this trap
and were further tangled by ret-overwriting between calls:
- -ENODEV when the USB device was already disconnected
- -ERESTARTSYS when mutex_lock_interruptible() was interrupted
- msi2500_set_usb_adc() failure: ret was silently overwritten by
the next call (msi2500_isoc_init), so the error was lost entirely
- msi2500_isoc_init() failure: cleanup_queued_bufs was called, but
the function then fell through to msi2500_ctrl_msg() and again
masked the original error by overwriting ret
- msi2500_ctrl_msg(CMD_START_STREAMING) failure: no cleanup at all,
leaving isoc URBs submitted with no way for the driver to consume
them
Consolidate the error paths into a small goto chain. Every failure
now stops the function, drains the queued-buffer list, and returns
the real error code. The ctrl_msg failure path also rolls back the
preceding msi2500_isoc_init() via msi2500_isoc_cleanup() before
unlocking and draining.
The cleanup helper takes a vb2_buffer_state argument so that the
start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as
expected by userspace on start_streaming failure) while stop_streaming
keeps its existing VB2_BUF_STATE_ERROR semantics.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
Valery Borovsky [Mon, 11 May 2026 17:12:06 +0000 (20:12 +0300)]
media: airspy: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
airspy_start_streaming() returned -ENODEV early when the USB device had
been disconnected (s->udev == NULL) without returning any buffers that
buf_queue() had already accepted. Take v4l2_lock first and jump to the
existing err_clear_bit label, which already drains s->queued_bufs via
vb2_buffer_done(..., VB2_BUF_STATE_QUEUED) before unlocking.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
Arash Golgol [Sat, 9 May 2026 16:10:13 +0000 (19:40 +0330)]
media: video-i2c: use vb2_video_unregister_device on driver removal
The driver uses vb2_fop_release() as its file release operation, so
vb2_video_unregister_device() should be used instead of
video_unregister_device() during driver removal.
This ensures that the vb2 queue is properly disconnected before the
video device is unregistered.
Signed-off-by: Arash Golgol <arash.golgol@gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ricardo Ribalda [Thu, 7 May 2026 20:58:10 +0000 (20:58 +0000)]
media: staging: ipu3-imgu: Add range check for imgu_css_cfg_acc_stripe
If the driver's stripe information is invalid it can result in an integer
underflow. Add a range check to avoid this kind of error.
This patch fixes the following smatch error:
drivers/staging/media/ipu3/ipu3-css-params.c:1792 imgu_css_cfg_acc_stripe() warn: 'acc->stripe.bds_out_stripes[0]->width - 2 * f' 4294967168 can't fit into 65535 'acc->stripe.bds_out_stripes[1]->offset'
Cc: stable@vger.kernel.org Fixes: e11110a5b744 ("media: staging/intel-ipu3: css: Compute and program ccs") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ricardo Ribalda [Thu, 7 May 2026 20:58:07 +0000 (20:58 +0000)]
media: i2c: mt9p031: Rewrite assignment to make smatch happy
The current code makes smatch a bit uncomfortable:
drivers/media/i2c/mt9p031.c:799 mt9p031_s_ctrl() warn: assigning (-1952) to unsigned variable 'data'
Probably because smatch is not clever enough (yet). Do a simple rewrite
to make sure that smatch understands what we are doing here.
Ricardo Ribalda [Thu, 7 May 2026 20:58:06 +0000 (20:58 +0000)]
media: v4l2-dev: Add range check for vdev->minor
If the fixed minor ranges are not properly set we could end up in a
situation where the calculated minor is invalid. Add a check for this in
the code to make it more robust.
This check also fixes the following false positive smatch warning:
Hungyu Lin [Thu, 7 May 2026 02:22:13 +0000 (02:22 +0000)]
media: tegra-video: vi: fix invalid u32 return value in format lookup
tegra_get_format_fourcc_by_idx() returns a u32 but uses -EINVAL to
signal an out-of-bounds index. This results in a large unsigned
value being returned, which may be interpreted as a valid fourcc.
Returning 0 is not a valid fourcc either. This condition should
never happen, so use WARN_ON_ONCE() to catch unexpected out-of-bounds
access and return a valid fallback format instead.
Suggested-by: Hans Verkuil <hverkuil+cisco@kernel.org> Fixes: 3d8a97eabef0 ("media: tegra-video: Add Tegra210 Video input driver") Cc: stable@vger.kernel.org Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Hungyu Lin <dennylin0707@gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ben Hoff [Sun, 10 May 2026 23:50:36 +0000 (19:50 -0400)]
media: pci: add AVMatrix HWS capture driver
Add an in-tree AVMatrix HWS PCIe capture driver. The driver supports
up to four HDMI inputs and exposes the video capture path through
V4L2 with vb2-dma-contig streaming, DV timings, and per-input
controls. Audio support is intentionally omitted from this
submission.
This patch also adds the MAINTAINERS entry for the new driver.
This driver is derived from a GPL out-of-tree driver.
Changes since v6:
- v6 accidently contained legacy history, resubmitting with latest
- remove an unused mode-change label reported by W=1
Changes since v5:
- keep queue_setup() and alloc_sizeimage on the logical sizeimage value
- drop the dead queue_setup() fallback that rebuilt pix.sizeimage
on the fly
- clarify that hws_calc_sizeimage() models the packed-YUYV-only path
- add Assisted-by attribution for Codex
Changes since v4:
- replace plain 64-bit elapsed-time divisions in debug logging with
div_u64() so i386 module builds do not emit __udivdi3 references
Changes since v3:
- fold the MAINTAINERS update into this patch so per-patch CI sees the
new file pattern
- wrap the validation text for checkpatch
Changes since v2:
- keep scratch DMA allocation on a single probe-owned path
- avoid double-freeing V4L2 control handlers on register unwind
- drop the extra per-node resolution sysfs ABI
- turn live geometry changes into explicit SOURCE_CHANGE renegotiation
- report live DV timings and reject attempts to retime a live source
- stop advertising RESOLUTION source changes for fps-only updates
- keep live fps state across harmless S_FMT restarts
- stop exposing an unvalidated DV RX power-present signal
- clean the imported sources for checkpatch and W=1 builds
Validation:
- build-tested with W=1 against a local kernel build tree
- compiled the driver with ARCH=i386 allmodconfig and verified the
resulting hws_pci.o, hws_video.o, and hws.o do not reference
__udivdi3
- v4l2-compliance 1.33.0-5459 from v4l-utils commit 4a0d2c3b4f523406cb9a6f4c541ef14f72f19f3d on /dev/video2:
48 tests succeeded, 0 failed, 1 warning
DV_RX_POWER_PRESENT is intentionally left unsupported in this revision
because current hardware evidence does not expose a validated
receiver-side power-detect signal distinct from active video presence.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202604020522.z22eZuW8-lkp@intel.com/ Assisted-by: Codex:gpt-5.5 Signed-off-by: Ben Hoff <hoff.benjamin.k@gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The two halves of the splat refer to two different events on
&ht->mutex.
The kswapd0 path is unambiguous: shmem_evict_inode at mm/shmem.c:1429
calls simple_xattrs_free(), which calls rhashtable_free_and_destroy()
on the per-inode simple_xattrs rhashtable being torn down with the
inode.
The previously-recorded ht->mutex -> fs_reclaim edge comes from
rht_deferred_worker -> rhashtable_rehash_alloc ->
bucket_table_alloc(GFP_KERNEL) -> __kvmalloc_node ->
might_alloc -> fs_reclaim. That stack stops at generic library code:
there is no subsystem-specific frame above rht_deferred_worker, so
the splat does not identify which rhashtable's worker recorded the
edge -- only that some rhashtable in the system did.
Whether or not that recording happened on the same simple_xattrs ht
that is now being destroyed, the predicted deadlock cannot occur:
rhashtable_free_and_destroy() does cancel_work_sync(&ht->run_work)
before taking ht->mutex, so the deferred worker cannot be running on
the instance being torn down. If the recording was on a different
rhashtable instance, the two ht->mutex acquisitions are on distinct
mutex objects and cannot deadlock either.
Lockdep flags a cycle regardless because mutex_init(&ht->mutex) lives
on a single source line in rhashtable_init_noprof(), so every
ht->mutex in the kernel shares one static lockdep class. Lockdep
matches by class, not by instance, and collapses all of these into
one node.
Lift the lockdep key out of rhashtable_init_noprof() and into the
caller. The user-visible rhashtable_init_noprof() /
rhltable_init_noprof() identifiers become macros that declare a
per-call-site static lock_class_key.
Link: https://patch.msgid.link/20260427-work-rhashtable-lockdep-v1-1-f69e8bd91cb2@kernel.org Fixes: c6307674ed82 ("mm: kvmalloc: add non-blocking support for vmalloc") Acked-by: Michal Hocko <mhocko@suse.com> Reported-by: syzbot+5af806780f38a5fe691f@syzkaller.appspotmail.com Closes: https://lore.kernel.org/69e798fe.050a0220.24bfd3.0032.GAE@google.com Signed-off-by: Christian Brauner <brauner@kernel.org>
drm/i915/dp: Fix VSC dynamic range signaling for RGB formats
For RGB, set dynamic_range to CTA or VESA based on
crtc_state->limited_color_range so sinks apply correct
quantization. YCbCr remains limited (CTA) range.
(DP v1.4, Table 5-1)
drm/i915: skip __i915_request_skip() for already signaled requests
After a GPU reset the HWSP is zeroed, so previously completed
requests appear incomplete. If such a request is picked up during
reset_rewind() and marked guilty, i915_request_set_error_once()
returns early (fence already signaled), leaving fence.error without
a fatal error code. The subsequent __i915_request_skip() then hits:
```
GEM_BUG_ON(!fatal_error(rq->fence.error))
```
Fixes a kernel BUG observed on Sandy Bridge (Gen6) during
heartbeat-triggered engine resets.
```
kernel BUG at drivers/gpu/drm/i915/i915_request.c:556!
RIP: __i915_request_skip+0x15e/0x1d0 [i915]
...
__i915_request_reset+0x212/0xa70 [i915]
reset_rewind+0xe4/0x280 [i915]
intel_gt_reset+0x30d/0x5b0 [i915]
heartbeat+0x516/0x530 [i915]
```
Guard __i915_request_skip() with i915_request_signaled(), if the
fence is already signaled, the ring content is committed and there
is nothing left to skip.
Fixes: 36e191f0644b ("drm/i915: Apply i915_request_skip() on submission") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/13729 Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Cc: stable@vger.kernel.org # v5.7+ Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/fe76921d35b6ae85aa651822726d0d9815aa5362.1776339012.git.sebastian.brzezinka@intel.com
(cherry picked from commit 5ba54393dcd7adf75a9f39f5a933b1538349cad5) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Sophie D [Sat, 9 May 2026 02:54:05 +0000 (22:54 -0400)]
drm/gud: Add RCade Display Adapter VID/PID pair
The RCade Display Adapter is a hardware device that allows driving an
Arcade CRT display via the GUD protocol. Currently it spoofs an
existing GUD VID/PID pair. However, now that it has its own pair
assigned, it makes sense to add this to the list of pairs that GUD
supports natively.
More information can be found in the project repositories:
https://gitlab.scd31.com/stephen/stm32-usb-vga-adapter-hardware
https://gitlab.scd31.com/stephen/stm32-usb-vga-rcade-adapter
Sven Eckelmann [Sat, 2 May 2026 19:25:19 +0000 (21:25 +0200)]
batman-adv: tt: prevent TVLV entry number overflow
The helpers to prepare the buffers for the local and global TT based
replies are trying to sum up all TT entries which can be found for each
VLAN. In theory, this sum can be too big for an u16 and therefore overflow.
A too small buffer would then be allocated for the TVLV.
The too small buffer will be handled gracefully by
batadv_tt_tvlv_generate() and is not causing a buffer overflow - just a
truncated reply. But this overflow shouldn't have happened in the first and
the too small buffer should never have been allocated when an overflow was
detected.
Cc: stable@kernel.org Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Sven Eckelmann [Sat, 2 May 2026 18:47:34 +0000 (20:47 +0200)]
batman-adv: tt: avoid empty VLAN responses
The commit 16116dac2339 ("batman-adv: prevent TT request storms by not
sending inconsistent TT TLVLs") added checks to the local (direct) TT
response code. But the response can also be done indirectly by another node
using the global TT state. To avoid such inconsistency states reported in
the original fix, also avoid sending empty VLANs for replies from the
global TT state.
Cc: stable@kernel.org Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Sven Eckelmann [Sat, 2 May 2026 17:47:11 +0000 (19:47 +0200)]
batman-adv: tt: fix TOCTOU race for reported vlans
The local TT based TVLV is generated by first checking the number of VLANs
which have at least one TT entry. A new buffer with the correct size for
the VLANs is then allocated. Only then, the list of VLANs s used to fill
the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock
is held. But the actual number of TT entries of each VLAN can still
increase during this time - just not the number of VLANs in the list.
But the prefilter used in the buffer size calculation might still cause an
increase of the number of VLANs which need to be stored. Simply because a
VLAN might now suddenly have at least one entry when it had none in the
pre-alloc check - and then needs to occupy space which was not allocated.
It is better to overestimate the buffer size at the beginning and then fill
the buffer only with the VLANs which are not empty.
Cc: stable@kernel.org Fixes: 16116dac2339 ("batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Sven Eckelmann [Sat, 2 May 2026 17:53:21 +0000 (19:53 +0200)]
batman-adv: tt: fix negative last_changeset_len
batadv_piv_tt::last_changeset_len len was declared as s16, but the field is
never intended to hold a negative value. When a value greater than 32767 is
assigned, it wraps to a negative signed integer.
In batadv_send_my_tt_response(), last_changeset_len is temporarily widened
to s32. The incorrectly negative s16 value propagates into the s32, causing
batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but
populates only a small portion of it with the collected changeset. All
remaining bits are kept uninitialized.
Using an u16 avoids this type confusion and ensures that no (negative) sign
extension is performed in batadv_send_my_tt_response().
Sven Eckelmann [Sat, 2 May 2026 17:53:21 +0000 (19:53 +0200)]
batman-adv: tt: fix negative tt_buff_len
batadv_orig_node::tt_buff_len was declared as s16, but the field is never
intended to hold a negative value. When a value greater than 32767 is
assigned, it wraps to a negative signed integer.
In batadv_send_other_tt_response(), tt_buff_len is temporarily widened to
s32. The incorrectly negative s16 value propagates into the s32, causing
batadv_tt_prepare_tvlv_global_data() to allocate a full sized buffer but
populates only a small portion of it with the collected changeset. All
remaining bits are kept uninitialized.
Using an u16 avoids this type confusion and ensures that no (negative) sign
extension is performed in batadv_send_other_tt_response().
Sven Eckelmann [Sat, 2 May 2026 17:08:37 +0000 (19:08 +0200)]
batman-adv: tt: reject oversized local TVLV buffers
The commit 3a359bf5c61d ("batman-adv: reject oversized global TT response
buffers") added a check to ensure that a global return buffer size can be
stored in an u16. The same buffer handling also exists for the local data
buffer but was not touched.
A similar check should be also be in place for the local TVLV buffer. It
doesn't have the similar attack surface because it is only generated from
locally discovered MAC addresses but the dynamic nature could still cause
temporarily to large buffers.
Cc: stable@kernel.org Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann <sven@narfation.org>
powerpc/hv-gpci: fix preempt count leak in sysfs show paths
Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb)
(which calls preempt_disable()) but only call the matching put_cpu_var()
on the error path under the 'out:' label. Every successful read leaks
one preempt_disable():
(affinity_domain_via_partition_show() was already correct.)
On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and
eventually return to userspace with preemption still disabled. The
next user-mode page fault then hits faulthandler_disabled() == 1,
gets forced to SIGSEGV, and the resulting coredump trips
'BUG: scheduling while atomic' in call_usermodehelper_exec ->
wait_for_completion_state -> schedule:
powerpc: fix dead default for GUEST_STATE_BUFFER_TEST
The GUEST_STATE_BUFFER_TEST config option should default
to KUNIT_ALL_TESTS so that if all tests are enabled then
it is included, but currently the 'default KUNIT_ALL_TESTS'
statement is shadowed by 'def_tristate n',
meaning that this second default statement is currently dead code.
It looks to me like the commit 6ccbbc33f06a ("KVM: PPC: Add helper library for Guest State Buffers")
intended to set the default to KUNIT_ALL_TESTS, but mistakenly
missed the def_tristate.
This dead code was found by kconfirm, a static analysis tool for Kconfig.
Fixes: 6ccbbc33f06a ("KVM: PPC: Add helper library for Guest State Buffers") Signed-off-by: Julian Braha <julianbraha@gmail.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Reviewed-by: Amit Machhiwal <amachhiw@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260405161545.161006-1-julianbraha@gmail.com
Commit a28d3af2a26c ("[PATCH] 2/5 powerpc: Rework PowerMac i2c part 2")
removed the last calls to the pmac_low_i2c_{lock,unlock}() functions.
Hence, remove these two functions.
Ma Ke [Sun, 16 Nov 2025 02:44:11 +0000 (10:44 +0800)]
powerpc/warp: Fix error handling in pika_dtm_thread
pika_dtm_thread() acquires client through of_find_i2c_device_by_node()
but fails to release it in error handling path. This could result in a
reference count leak, preventing proper cleanup and potentially
leading to resource exhaustion. Add put_device() to release the
reference in the error handling path.
Found by code review.
Cc: stable@vger.kernel.org Fixes: 3984114f0562 ("powerpc/warp: Platform fix for i2c change") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20251116024411.21968-1-make24@iscas.ac.cn
Ally Heev [Sun, 16 Nov 2025 14:25:44 +0000 (19:55 +0530)]
powerpc: 82xx: fix uninitialized pointers with free attribute
Uninitialized pointers with `__free` attribute can cause undefined
behavior as the memory allocated to the pointer is freed automatically
when the pointer goes out of scope.
powerpc/km82xx doesn't have any bugs related to this as of now, but,
it is better to initialize and assign pointers with `__free` attribute
in one statement to ensure proper scope-based cleanup
Linus Walleij [Tue, 5 May 2026 18:47:56 +0000 (20:47 +0200)]
powerpc/g5: Enable all windfarms by default
The G5 defconfig is clearly intended for the G5 Powermac
series, and that should enable all the available
windfarm drivers, or the machine will overheat a short
while after booting and shut itself down, which is
annoying.
Sibi Sankar [Fri, 13 Mar 2026 12:08:14 +0000 (17:38 +0530)]
arm64: dts: qcom: glymur-crd: Enable ADSP and CDSP
Enable ADSP and CDSP on Glymur CRD board.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260313120814.1312410-6-sibi.sankar@oss.qualcomm.com
[bjorn: Moved snippet to common glymur-crd.dtsi] Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Guangshuo Li [Thu, 7 May 2026 10:06:03 +0000 (18:06 +0800)]
drm/bridge: imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
imx8qxp_pxl2dpi_get_available_ep_from_port() returns ERR_PTR()
on errors. imx8qxp_pxl2dpi_find_next_bridge() stores its return
value in a __free(device_node) variable before checking IS_ERR().
When the function returns on the error path, the cleanup action calls
of_node_put() on the ERR_PTR() value.
Do not let a device_node cleanup variable hold error pointers. Change
imx8qxp_pxl2dpi_get_available_ep_from_port() to return an int and pass
the endpoint node through an output argument. Initialize the output
argument to NULL so callers hold either NULL on error paths or a valid
device_node pointer on successful path.
Fixes: ceea3f7806a10 ("drm/bridge: imx8qxp-pxl2dpi: simplify put of device_node pointers") Cc: stable@vger.kernel.org Reviewed-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Link: https://patch.msgid.link/20260507100604.667731-1-lgs201920130244@gmail.com Signed-off-by: Liu Ying <victor.liu@nxp.com>
Tao Cui [Fri, 8 May 2026 12:54:12 +0000 (20:54 +0800)]
net: ethtool: fix missing closing paren in rings_reply_size()
sizeof(u32) on the _RINGS_CQE_SIZE line is missing its closing
parenthesis, causing nla_total_size() to absorb the subsequent
_TX_PUSH and _RX_PUSH entries.
The resulting size estimate happens to be numerically identical
due to NLA alignment, so not treating this as a real fix.
But the nesting is wrong and misleading.
Signed-off-by: Tao Cui <cuitao@kylinos.cn> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20260508125412.189804-1-cuitao@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ASoC: SOF: amd: Fix error code handling in psp_send_cmd()
The smn_read_register() helper returns negative error codes on failure
or the register value on success. When used with read_poll_timeout(),
the return value is stored in the 'data' variable.
Currently 'data' is declared as u32, which causes negative error codes
to be cast to large positive values. This makes the condition 'data > 0'
incorrectly treat errors as success.
Fix by changing 'data' from u32 to int, matching the pattern used in
psp_mbox_ready() which correctly handles the same helper function.
Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/linux-sound/agGES8vWrLOrBu28@stanley.mountain/ Fixes: f120cf33d232 ("ASoC: SOF: amd: Use AMD_NODE") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20260511153638.724810-1-mario.limonciello@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
qed: fix division by zero in qed_init_wfq_param when all vports are configured
In qed_init_wfq_param(), variable non_requested_count can become zero
when the number of vports with the configured flag set (including the
current vport being configured) equals total num_vports. This happens
when configuring the last unconfigured vport or when re-configuring
an already configured vport.
The function then calculates left_rate_per_vp = total_left_rate /
non_requested_count, which causes division by zero.
Fix this by skipping the division when non_requested_count is zero.
In that case, there is no remaining bandwidth to distribute, so just
record the configuration for the current vport and return success.
====================
net: phy: motorcomm: add ACPI _DSD property support
This series makes the Motorcomm PHY driver parse firmware properties via
device_property_*() so the same property set can be provided by either
Devicetree or ACPI _DSD.
Patch 1 switches drivers/net/phy/motorcomm.c from of_property_*() to
device_property_*() on &phydev->mdio.dev.
Patch 2 documents Motorcomm yt8xxx PHY ACPI _DSD properties under
Documentation/firmware-guide/acpi/dsd and links the new document from
the ACPI index.
====================
chunzhi.lin [Thu, 7 May 2026 04:02:20 +0000 (12:02 +0800)]
net: phy: motorcomm: use device properties for firmware tuning
The Motorcomm PHY driver reads optional firmware properties via
of_property_read_*() from phydev->mdio.dev.of_node. This works for
Device Tree based systems, but causes ACPI platforms to ignore the same
properties when they are supplied through _DSD.
As a result, ACPI-described Motorcomm PHY devices fall back to default
settings instead of applying firmware-provided tuning such as
rx/tx internal delay, drive strength, clock output frequency, and
optional boolean controls like auto-sleep-disabled,
keep-pll-enabled, and tx clock inversion.
Switch these lookups to device_property_read_*() so the driver uses the
generic firmware node interface and can consume the same property names
from either Device Tree or ACPI.
This keeps the existing DT behavior unchanged while allowing ACPI
platforms to honor PHY configuration from firmware.
We have completed testing on Sophgo RISC-V architecture server SD3-10.
This server has a 64-core Thead C920 CPU whose DWMAC is connected to
Motorcomm's PHY YT8531. This server supports UEFI boot and it would like
to use the ACPI table.
Davide Caratti [Fri, 8 May 2026 17:05:10 +0000 (19:05 +0200)]
net/sched: dualpi2: initialize timer earlier in dualpi2_init()
'pi2_timer' needs to be initialized in all error paths of dualpi2_init():
otherwise, a failure in qdisc_create_dflt() causes the following crash in
dualpi2_destroy():
Allow switching from 8 to 64 for the maximum number of subflows and
accepted ADD_ADDR, and from 8 to 255 for the number of MPTCP endpoints.
The previous limit of 8 subflows makes sense in most cases. Using more
subflows will very likely *not* improve the situation, and could even
decrease the performances. But there are no technical limitations nor
performance impact to raise this limit, so let's do it: this will allow
people with very specific use-cases, and researchers to easily create
more subflows, and measure the performance impact by themselves.
- Patches 1-2: increase subflows and accepted ADD_ADDR limits.
- Patches 3-4: increase endpoints limit.
- Patches 5-7: validate the new limits: 64 subflows, 255 endpoints.
- Patch 8: selftests: use send()/recv() instead of sendto()/recvfrom().
====================
These limits have been recently updated, from 8 to:
- 64 for the subflows and accepted add_addr
- 255 for the MPTCP endpoints
These modifications validate the new limits, but are also compatible
with the previous ones, to be able to continue to validate stable kernel
using the last version of the selftests. That's why new variables are
now used instead of hard-coded values.
The limits have been recently increased, it is required to validate that
having 64 subflows is allowed.
Here, both the client and the server have 8 network interfaces. The
server has 8 endpoints marked as 'signal' to announce all its v4
addresses. The client also has 8 endpoints, but marked as 'subflow' and
'fullmesh' in order to create 8 subflows to each address announced by
the server. This means 63 additional subflows will be created after the
initial one.
If it is not possible to increase the limits to 64, it means an older
kernel version is being used, and the test is skipped.
selftests: mptcp: join: allow changing ifaces nr per test
By default, 4 network interfaces are created per subtest in a dedicated
net namespace. Each netns has a dedicated pair of v4 and v6 addresses.
Future tests will need more.
Simply always creating more network interfaces per test will increase
the execution time for all other tests, for no other benefits. So now it
is possible to change this number only when needed, by setting ifaces_nr
when calling 'reset' and 'init_shapers', e.g.
Note that it might also be interesting to decrease the default value to
2 to reduce the setup time, especially when a debug kernel config is
being used.
The endpoints are managed in a list which was limited to 8 entries.
This limit can be too small in some cases: by having the same limit as
the number of subflows, it might not allow creating all expected
subflows when having a mix of v4 and v6 addresses that can all use MPTCP
on v4/v6 only networks.
While increasing the limit above the new subflows one, why not using the
technical limit: 255. Indeed, the endpoint will each have an ID that
will be used on the wire, limited to u8, and the ID 0 is reserved to the
initial subflow.
mptcp: pm: kernel: allow flushing more than 8 endpoints
The mptcp_rm_list structure contains an array of IDs of 8 entries: to be
able to send a RM_ADDR with 8 IDs. This limitation was OK so far because
there could maximum 8 endpoints.
But this is going to change in the next commit. To cope with that, if
one of the arrays is full, the iteration stops, the lists are processed,
then the iteration continues where it previously stopped.
Note that if there are many endpoints to remove, and multiple RM_ADDR to
send, it might be more likely that some of these RM_ADDRs are dropped or
lost. This is a known limitation: RM_ADDR are not retransmitted in
MPTCPv1.
This means switching the maximum from 8 to 64 for the number of subflows
and accepted ADD_ADDR.
The previous limit of 8 subflows makes sense in most cases. Using more
subflows will very likely *not* improve the situation, and could even
decrease the performances. But there are no technical limitations nor
performance impact to raise this limit, so let's do it: this will allow
people with very specific use-cases, and researchers to easily create
more subflows, and measure the performance impact by themselves.
The theoretical limit is 255 -- the ID is written in a u8 on the wire --
but 64 is more than enough. With so many subflows, it will be costly to
iterate over all of them when operations are done in bottom half.
Note that the in-kernel PM will continue to create subflows in reply to
ADD_ADDR with a single batch of maximum 8 subflows. Same when adding new
"subflow" endpoints with the fullmesh flag. Increasing those batch
limits would have a memory impact, and it looks fine not to cover these
cases with larger batches for the moment. If more is needed later, the
position of the last subflow from the list could be remembered, and the
list iteration could continue later.
mptcp: pm: in-kernel: explicitly limit batches to array size
The in-kernel PM can create subflows in reply to ADD_ADDR by batch of
maximum 8 subflows for the moment. Same when adding new "subflow"
endpoints with the fullmesh flag. This limit is linked to the arrays
used during these steps.
There was no explicit limit to the arrays size (8), because the limit of
extra subflows is the same (8). It seems safer to use an explicit limit,
but also these two sizes are going to be different in the next commit.
Abel Vesa [Tue, 14 Apr 2026 17:05:51 +0000 (20:05 +0300)]
arm64: dts: qcom: glymur: Drop RPMh CXO clocks from QMP PHYs
On Glymur, all QMP PHYs except the one used by USB SS0 take their
reference clock from the TCSR clock controller. Since these TCSR clocks
already derive from RPMH_CXO_CLK as their sole parent, there is no need
to provide an extra `clkref` clock to the PHY nodes.
Drop the extra RPMh CXO clock inputs and use the TCSR clocks as the PHY
reference clocks instead.
This also fixes the devicetree schema validation, as the bindings do not
allow a separate `clkref` clock.
Fixes: 4eee57dd4df9 ("arm64: dts: qcom: glymur: Add USB related nodes") Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reported-by: Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/r/20260410145205.GA554754-robh@kernel.org/ Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260414-dts-glymur-drop-rpmh-cxo-clk-from-qmpphys-v1-1-ab12d77c4aec@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Breno Leitao [Fri, 8 May 2026 13:55:04 +0000 (06:55 -0700)]
tools/bootconfig: render kernel.* subtree as cmdline string with -C
Add a -C option that finds the "kernel" subtree of a bootconfig file
and prints it as a flat, space-separated cmdline string by calling the
shared xbc_snprint_cmdline() renderer. An empty or absent kernel.*
subtree produces empty output and exits successfully.
This lets the kernel build embed a bootconfig file as a plain cmdline
string at build time, so embedded bootconfig values can reach
parse_early_param() during architecture setup without parsing the
bootconfig at runtime.
The renderer is intentionally limited to the kernel.* subtree: that is
the only thing the kernel build needs to embed; init.* and other
subtrees keep going through the runtime parser.
Example of this new mode:
# cat /tmp/test.bconf
kernel {
foo = bar
baz = "hello world"
arr = 1, 2
}
init.foo = nope
Breno Leitao [Fri, 8 May 2026 13:55:03 +0000 (06:55 -0700)]
bootconfig: move xbc_snprint_cmdline() to lib/bootconfig.c
Move xbc_snprint_cmdline() from init/main.c to lib/bootconfig.c so the
function (and its xbc_namebuf scratch buffer) becomes part of the shared
parser library. tools/bootconfig already compiles lib/bootconfig.c
directly, which lets a follow-up patch reuse the same renderer in the
userspace tool to convert a bootconfig file into a flat cmdline string
at build time.
David Yang [Thu, 7 May 2026 21:40:51 +0000 (05:40 +0800)]
net: mention the convention for .ndo_setup_tc()
qdisc_offload_dump_helper(), originated from commit 602f3baf2218
("net_sch: red: Add offload ability to RED qdisc"), is designed to that
Whether RED is being offloaded is being determined every time dump
action is being called because parent change of this qdisc could
change its offload state but doesn't require any RED function to be
called.
and returning -EOPNOTSUPP (for dump queries) does not mean "I don't have
any statistics", but "I don't offload this qdisc anymore". At least two
existing drivers did it wrong, so it is worth mentioning.
net: ena: PHC: Check return code before setting timestamp output
ena_phc_gettimex64() is setting the output parameter regardless
of whether ena_com_phc_get_timestamp() succeeded or failed.
When ena_com_phc_get_timestamp() returns an error, the timestamp
parameter may contain uninitialized stack memory (e.g., when PHC is
disabled or in blocked state) or invalid hardware values. Passing
these to userspace via the PTP ioctl is both a security issue
(information leak) and a correctness bug.
Fix by checking the return code after releasing the lock and only
setting the output timestamp on success.
Fixes: e0ea34158ee8 ("net: ena: Add PHC support in the ENA driver") Cc: stable@vger.kernel.org Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20260507003518.22554-1-akiyano@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/rds: reset op_nents when zerocopy page pin fails
When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(),
the pinned pages are released with put_page(), and
rm->data.op_mmp_znotifier is cleared. But we fail to properly
clear rm->data.op_nents.
Later when rds_message_purge() is called from rds_sendmsg() the
cleanup loop iterates over the incorrectly non zero number of
op_nents and frees them again.
Fix this by properly resetting op_nents when it should be in
rds_message_zcopy_from_user().
The 'atu' information is already set in the dwc core, if it is specified in
the devicetree. The driver uses its own default, if not set in the
devicetree. This information is hardware-specific and should therefore be
maintained in the devicetree rather than in the source.
To be backward compatible, this field is not mandatory. If 'atu' resource
is not specified in the devicetree, the driver’s default value is used.
PCI: intel-gw: Fix ATU base address setup and add optional DT 'atu' region
The ATU base address was set in intel_pcie_host_setup(), which is called
via pp->ops->init(). However, dw_pcie_get_resources() runs before this
callback and sets a default atu_base of 0x300000, which then gets
overwritten by the driver's value of 0xC0000.
But this ordering is broken because atu_base must be set before
dw_pcie_get_resources() runs, not after. So move the atu_base assignment
from intel_pcie_host_setup() to intel_pcie_probe() to fix the
initialization order.
The call stack is:
intel_pcie_probe
dw_pcie_host_init
dw_pcie_host_get_resources
dw_pcie_get_resources <- sets atu_base = 0x300000
pp->ops->init
intel_pcie_rc_init
intel_pcie_host_setup <- was overwriting atu_base here
Additionally, add support for parsing the ATU region from the device tree.
If an 'atu' region is present in DT, the DWC core parses it via
dw_pcie_get_resources() and the driver does not set atu_base explicitly.
If 'atu' is absent, the driver falls back to the hardcoded offset (0xC0000
from DBI base) for backwards compatibility, with a warning to the user.
The pcie-intel-gw driver had no .start_link() callback. Add one so the
driver works again and does not abort with the following error messages
during probing:
intel-gw-pcie d1000000.pcie: host bridge /soc/pcie@d1000000 ranges:
intel-gw-pcie d1000000.pcie: MEM 0x00dc000000..0x00ddffffff -> 0x00dc000000
intel-combo-phy d0c00000.combo-phy: Set combo mode: combophy[1]: mode: PCIe single lane mode
intel-gw-pcie d1000000.pcie: No outbound iATU found
intel-gw-pcie d1000000.pcie: Cannot initialize host
intel-gw-pcie d1000000.pcie: probe with driver intel-gw-pcie failed with error -22
intel-gw-pcie c1100000.pcie: host bridge /soc/pcie@c1100000 ranges:
intel-gw-pcie c1100000.pcie: MEM 0x00ce000000..0x00cfffffff -> 0x00ce000000
intel-combo-phy c0c00000.combo-phy: Set combo mode: combophy[3]: mode: PCIe single lane mode
intel-gw-pcie c1100000.pcie: No outbound iATU found
intel-gw-pcie c1100000.pcie: Cannot initialize host
intel-gw-pcie c1100000.pcie: probe with driver intel-gw-pcie failed with error -22
Fixes: c5097b9869a1 ("Revert "PCI: dwc: Wait for link up only if link is started"") Fixes: da56a1bfbab5 ("PCI: dwc: Wait for link up only if link is started") Signed-off-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: remove timestamps] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-5-0a2b933fe04f@dev.tdt.de
To ensure that the boot sequence is correct, the DWC PCIe core clock must
be switched on before PHY init call [1]. This changes are based on patched
kernel sources of the MaxLinear SDK.
The reason why the MaxLinear SDK is used as a reference here is, that this
PCIe DWC IP is used in the URX851 and URX850 SoC. This SoC was originally
developed by Intel when they acquired Lantiq’s home networking division in
2015 [2]. In 2020 the home network division was sold to MaxLinear [3].
Since then, this SoC belongs to MaxLinear. They use their own SDK, which
runs on kernel version '5.15.x'.
PCI: intel-gw: Move interrupt enable to own function
To improve the readability of the code, move the interrupt enable
instructions to a separate function. That is already done for the disable
interrupt instruction.
In addition, clear and disable all pending interrupts, as is done in
intel_pcie_core_irq_disable(). After that, enable all relevant interrupts
again. The 'PCIE_APP_IRNEN' definition contains all the relevant interrupts
that are of interest.
This change is also done in the MaxLinear SDK [1]. As I unfortunately don’t
have any documentation for this IP core, I suspect that the intention is to
set the IP core for interrupt handling to a specific state. Perhaps the
problem is that the IP core did not reinitialize the interrupt register
properly after a power cycle.
In my view, it can’t do any harm to switch the interrupt off and then on
again to set them to a specific state.
The reason why the MaxLinear SDK is used as a reference here is, that this
PCIe DWC IP is used in the URX851 and URX850 SoC. This SoC was originally
developed by Intel when they acquired Lantiq’s home networking division in
2015 [2]. In 2020 the home network division was sold to MaxLinear [3].
Since then, this SoC belongs to MaxLinear. They use their own SDK, which
runs on kernel version '5.15.x'.
projects / thirdparty / linux.git / log
