Jeff King [Thu, 13 Aug 2020 14:59:36 +0000 (10:59 -0400)]
make git-bugreport a builtin
There's no reason that bugreport has to be a separate binary. And since
it links against libgit.a, it has a rather large disk footprint. Let's
make it a builtin, which reduces the size of a stripped installation
from 24MB to 22MB.
This also simplifies our Makefile a bit. And we can take advantage of
builtin niceties like RUN_SETUP_GENTLY.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 13 Aug 2020 14:58:55 +0000 (10:58 -0400)]
make credential helpers builtins
There's no real reason for credential helpers to be separate binaries. I
did them this way originally under the notion that helper don't _need_
to be part of Git, and so can be built totally separately (and indeed,
the ones in contrib/credential are). But the ones in our main Makefile
build on libgit.a, and the resulting binaries are reasonably large.
We can slim down our total disk footprint by just making them builtins.
This reduces the size of:
make strip install
from 29MB to 24MB on my Debian system.
Note that credential-cache can't operate without support for Unix
sockets. Currently we just don't build it at all when NO_UNIX_SOCKETS is
set. We could continue that with conditionals in the Makefile and our
list of builtins. But instead, let's build a dummy implementation that
dies with an informative message. That has two advantages:
- it's simpler, because the conditional bits are all kept inside
the credential-cache source
- a user who is expecting it to exist will be told _why_ they can't
use it, rather than getting the "credential-cache is not a git
command" error which makes it look like the Git install is broken.
Note that our dummy implementation does still respond to "-h" in order
to appease t0012 (and this may be a little friendlier for users, as
well).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 13 Aug 2020 14:57:19 +0000 (10:57 -0400)]
Makefile: drop builtins from MSVC pdb list
Over the years some more programs have become builtins, but nobody
updated this MSVC-specific section of the file (which specifically says
that it should not include builtins). Let's bring it up to date.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 12 Aug 2020 01:04:13 +0000 (18:04 -0700)]
Merge branch 'ss/cmake-build'
CMake support to build with MSVC for Windows bypassing the Makefile.
* ss/cmake-build:
ci: modification of main.yml to use cmake for vs-build job
cmake: support for building git on windows with msvc and clang.
cmake: support for building git on windows with mingw
cmake: support for testing git when building out of the source tree
cmake: support for testing git with ctest
cmake: installation support for git
cmake: generate the shell/perl/python scripts and templates, translations
Introduce CMake support for configuring Git
Junio C Hamano [Wed, 12 Aug 2020 01:04:12 +0000 (18:04 -0700)]
Merge branch 'tb/upload-pack-filters'
The component to respond to "git fetch" request is made more
configurable to selectively allow or reject object filtering
specification used for partial cloning.
* tb/upload-pack-filters:
t5616: use test_i18ngrep for upload-pack errors
upload-pack.c: introduce 'uploadpackfilter.tree.maxDepth'
upload-pack.c: allow banning certain object filter(s)
list_objects_filter_options: introduce 'list_object_filter_config_name'
Junio C Hamano [Wed, 12 Aug 2020 01:04:12 +0000 (18:04 -0700)]
Merge branch 'es/worktree-doc-cleanups'
Doc cleanup around "worktree".
* es/worktree-doc-cleanups:
git-worktree.txt: link to man pages when citing other Git commands
git-worktree.txt: make start of new sentence more obvious
git-worktree.txt: fix minor grammatical issues
git-worktree.txt: consistently use term "working tree"
git-worktree.txt: employ fixed-width typeface consistently
Junio C Hamano [Wed, 12 Aug 2020 01:04:11 +0000 (18:04 -0700)]
Merge branch 'bc/sha-256-part-3'
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
Junio C Hamano [Mon, 10 Aug 2020 17:24:04 +0000 (10:24 -0700)]
Merge branch 'pb/guide-docs'
Update "git help guides" documentation organization.
* pb/guide-docs:
git.txt: add list of guides
Documentation: don't hardcode command categories twice
help: drop usage of 'common' and 'useful' for guides
command-list.txt: add missing 'gitcredentials' and 'gitremote-helpers'
Junio C Hamano [Mon, 10 Aug 2020 17:24:02 +0000 (10:24 -0700)]
Merge branch 'en/eol-attrs-gotchas'
All "mergy" operations that internally use the merge-recursive
machinery should honor the merge.renormalize configuration, but
many of them didn't.
* en/eol-attrs-gotchas:
checkout: support renormalization with checkout -m <paths>
merge: make merge.renormalize work for all uses of merge machinery
t6038: remove problematic test
t6038: make tests fail for the right reason
Junio C Hamano [Mon, 10 Aug 2020 17:24:02 +0000 (10:24 -0700)]
Merge branch 'jk/compiler-fixes-and-workarounds'
Small fixes and workarounds.
* jk/compiler-fixes-and-workarounds:
revision: avoid leak when preparing bloom filter for "/"
revision: avoid out-of-bounds read/write on empty pathspec
config: work around gcc-10 -Wstringop-overflow warning
Junio C Hamano [Mon, 10 Aug 2020 17:23:58 +0000 (10:23 -0700)]
Merge branch 'es/worktree-cleanup'
Code cleanup around "worktree" API implementation.
* es/worktree-cleanup:
worktree: retire special-case normalization of main worktree path
worktree: drop bogus and unnecessary path munging
worktree: drop unused code from get_linked_worktree()
worktree: drop pointless strbuf_release()
Junio C Hamano [Mon, 10 Aug 2020 17:23:57 +0000 (10:23 -0700)]
Merge branch 'jk/strvec'
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
Jeff King [Wed, 5 Aug 2020 08:42:40 +0000 (04:42 -0400)]
t5616: use test_i18ngrep for upload-pack errors
The tests added to t5616 in 6dd3456a8c (upload-pack.c: allow banning
certain object filter(s), 2020-08-03) can fail racily, but only with
GETTEXT_POISON enabled.
The remote upload-pack process writes that error message both as an ERR
packet, but also via a die() message. In theory we should see the
message twice in the "err" file. The client relays the message from the
packet to its stderr (with a "remote error:" prefix), and because this
is a local-system clone, upload-pack's stderr goes to the same place.
But because clone may be writing to the pipe when upload-pack calls
die(), it may get SIGPIPE and fail to relay the message. That's why we
need our "ok=sigpipe" trick. But our grep should still work reliably in
that case. Either:
- we got SIGPIPE on the client, which means upload-pack completed its
die(), and we'll see that version of the message.
- the client didn't get SIGPIPE, and so it successfully relays the
message.
In theory we'd see both copies of the message in the second case. But
now always! As soon as the client sees ERR, it exits and we run grep.
But we have no guarantee that the upload-pack process has exited at this
point, or even written its die() message. We might only see the client
version of the message.
Normally that's OK. We only need to see one or the other to pass the
test. But now consider GETTEXT_POISON. upload-pack doesn't translate the
die() message nor the ERR packet. But once the client receives it, it
calls:
die(_("remote error: %s"), buffer + 4);
That message _is_ marked for translation. Normally we'd just replace the
"remote error:" portion of it, but in GETTEXT_POISON mode, we replace
the whole thing with "# GETTEXT POISON #" and don't include the "%s"
part at all. So the whole text from the ERR packet is dropped, and so we
may racily see a test failure if upload-pack's die() call wasn't yet
written.
We can fix it by using test_i18ngrep, which just makes this grep a noop
in the poison mode.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Wed, 5 Aug 2020 01:19:07 +0000 (01:19 +0000)]
git.txt: add list of guides
Not all man5/man7 guides are mentioned in the 'git(1)' documentation,
which makes the missing ones somewhat hard to find.
Add a list of the guides to git(1) by leveraging the existing
`Documentation/cmd-list.perl` script to generate a file `cmds-guide.txt`
which gets included in git.txt.
Also, do not hard-code the manual section '1'. Instead, use a regex so
that the manual section is discovered from the first line of each
`git*.txt` file.
This addition was hinted at in 1b81d8cb19 (help: use command-list.txt
for the source of guides, 2018-05-20).
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding the list of command categories in both
`Documentation/Makefile` and `Documentation/cmd-list.perl`, make the
Makefile the authoritative source and tweak `cmd-list.perl` so that it
receives the list of command categories as argument.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Wed, 5 Aug 2020 01:19:05 +0000 (01:19 +0000)]
help: drop usage of 'common' and 'useful' for guides
Since 1b81d8cb19 (help: use command-list.txt for the source of guides,
2018-05-20), all man5/man7 guides listed in command-list.txt appear in
the output of 'git help -g'.
However, 'git help -g' still prefixes this list with "The common Git
guides are:", which makes one wonder if there are others!
In the same spirit, the man page for 'git help' describes the '--guides'
option as listing 'useful' guides, which is not false per se but can
also be taken to mean that there are other guides that exist but are not
useful.
Instead of 'common' and 'useful', use 'Git concept guides' in both
places. To keep the code in line with this change, rename
help.c::list_common_guides_help to list_guides_help.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Wed, 5 Aug 2020 01:19:04 +0000 (01:19 +0000)]
command-list.txt: add missing 'gitcredentials' and 'gitremote-helpers'
The guides 'gitcredentials' and 'gitremote-helpers' do not currently
appear in command-list.txt.
'gitcredentials' was forgotten back when guides were added to
command-list.txt in 1b81d8cb19 (help: use command-list.txt for the
source of guides, 2018-05-20).
'gitremote-helpers' was moved to section 7 in 439cc74632 (docs: move
gitremote-helpers into section 7, 2019-03-25), but command-list.txt was
not updated at the time.
Add these two guides to the list of guides in 'command-list.txt', so
that they appear in the output of 'git help --guides', and capitalize
the first word of the description of 'gitcredentials', as was done in 1b81d8c (help: use command-list.txt for the source of guides,
2018-05-20) for the other guides.
While at it, add a comment in Documentation/Makefile to remind developers
to update command-list.txt if they add a new guide.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pretend-object mechanism checks if the given object already
exists in the object store before deciding to keep the data
in-core, but the check would have triggered lazy fetching of such
an object from a promissor remote.
* jt/pretend-object-never-come-from-elsewhere:
sha1-file: make pretend_object_file() not prefetch
Junio C Hamano [Tue, 4 Aug 2020 20:53:57 +0000 (13:53 -0700)]
Merge branch 'jt/pack-objects-prefetch-in-batch'
While packing many objects in a repository with a promissor remote,
lazily fetching missing objects from the promissor remote one by
one may be inefficient---the code now attempts to fetch all the
missing objects in batch (obviously this won't work for a lazy
clone that lazily fetches tree objects as you cannot even enumerate
what blobs are missing until you learn which trees are missing).
* jt/pack-objects-prefetch-in-batch:
pack-objects: prefetch objects to be packed
pack-objects: refactor to oid_object_info_extended
Jeff King [Tue, 4 Aug 2020 07:50:17 +0000 (03:50 -0400)]
revision: avoid leak when preparing bloom filter for "/"
If we're given an empty pathspec, we refuse to set up bloom filters, as
described in f3c2a36810 (revision: empty pathspecs should not use Bloom
filters, 2020-07-01).
But before the empty string check, we drop any trailing slash by
allocating a new string without it. So a pathspec consisting only of "/"
will allocate that string, but then still cause us to bail, leaking the
new string. Let's make sure to free it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 4 Aug 2020 07:46:52 +0000 (03:46 -0400)]
revision: avoid out-of-bounds read/write on empty pathspec
Running t4216 with ASan results in it complaining of an out-of-bounds
read in prepare_to_use_bloom_filter(). The issue is this code to strip a
trailing slash:
last_index = pi->len - 1;
if (pi->match[last_index] == '/') {
because we have no guarantee that pi->len isn't zero. This can happen if
the pathspec is ".", as we translate that to an empty string. And if
that read of random memory does trigger the conditional, we'd then do an
out-of-bounds write:
Let's make sure to check the length before subtracting. Note that for an
empty pathspec, we'd end up bailing from the function a few lines later,
which makes it tempting to just:
if (!pi->len)
return;
early here. But our code here is stripping a trailing slash, and we need
to check for emptiness after stripping that slash, too. So we'd have two
blocks, which would require repeating some cleanup code.
Instead, just skip the trailing-slash for an empty string. Setting
last_index at all in the case is awkward since it will have a nonsense
value (and it uses an "int", which is a too-small type for a string
anyway). So while we're here, let's:
- drop last_index entirely; it's only used in two spots right next to
each other and writing out "pi->len - 1" in both is actually easier
to follow
- use xmemdupz() to duplicate the string. This is slightly more
efficient, but more importantly makes the intent more clear by
allocating the correct-sized substring in the first place. It also
eliminates any question of whether path_alloc is as long as
pi->match (which it would not be if pi->match has any embedded NULs,
though in practice this is probably impossible).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 4 Aug 2020 07:43:53 +0000 (03:43 -0400)]
config: work around gcc-10 -Wstringop-overflow warning
Compiling with gcc-10, -O2, and -fsanitize=undefined results in a
compiler warning:
config.c: In function ‘git_config_copy_or_rename_section_in_file’:
config.c:3170:17: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
3170 | output[0] = '\t';
| ~~~~~~~~~~^~~~~~
config.c:3076:7: note: at offset -1 to object ‘buf’ with size 1024 declared here
3076 | char buf[1024];
| ^~~
This is a false positive. The interesting lines of code are:
int i;
char *output = buf;
...
for (i = 0; buf[i] && isspace(buf[i]); i++)
; /* do nothing */
...
int offset;
offset = section_name_match(&buf[i], old_name);
if (offset > 0) {
...
output += offset + i;
if (strlen(output) > 0) {
/*
* More content means there's
* a declaration to put on the
* next line; indent with a
* tab
*/
output -= 1;
output[0] = '\t';
}
}
So we do assign output to buf initially. Later we increment it based on
"offset" and "i" and then subtract "1" from it. That latter step is what
the compiler is complaining about; it could lead to going off the left
side of the array if "output == buf" at the moment of the subtraction.
For that to be the case, then "offset + i" would have to be 0. But that
can't happen:
- we know that "offset" is at least 1, since we're in a conditional
block that checks that
- we know that "i" is not negative, since it started at 0 and only
incremented over whitespace
So the sum must be at least 1, and therefore it's OK to subtract one
from "output".
But that's not quite the whole story. Since "i" is an int, it could in
theory be possible to overflow to negative (when counting whitespace on
a very large string). But we know that's impossible because we're
counting the 1024-byte buffer we just fed to fgets(), so it can never be
larger than that.
Switching the type of "i" to "unsigned" makes the warning go away, so
let's do that.
Arguably size_t is an even better type (for this and for the other
length fields), but switching to it produces a similar but distinct
warning:
config.c: In function ‘git_config_copy_or_rename_section_in_file’:
config.c:3170:13: error: array subscript -1 is outside array bounds of ‘char[1024]’ [-Werror=array-bounds]
3170 | output[0] = '\t';
| ~~~~~~^~~
config.c:3076:7: note: while referencing ‘buf’
3076 | char buf[1024];
| ^~~
If we were to ever switch off of fgets() to strbuf_getline() or similar,
we'd probably need to use size_t to avoid other overflow problems. But
for now we know we're safe because of the small fixed size of our
buffer.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Tue, 4 Aug 2020 00:55:35 +0000 (20:55 -0400)]
git-worktree.txt: link to man pages when citing other Git commands
When citing other Git commands, rather than merely formatting them with
a fixed-width typeface, improve the reader experience by linking to them
directly via `linkgit:`.
Suggested-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Tue, 4 Aug 2020 00:55:34 +0000 (20:55 -0400)]
git-worktree.txt: make start of new sentence more obvious
When reading the rendered description of `add`, it's easy to trip over
and miss the end of one sentence and the start of the next, making it
seem as if they are part of the same statement, separated only by a
dash:
... specific files such as HEAD, index, etc. - may also be
specified as <commit-ish>; it is synonymous with...
This can be particularly confusing since the thoughts expressed by the
two sentences are unrelated. Reduce the likelihood of confusion by
making it obvious that the two sentences are distinct.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Tue, 4 Aug 2020 00:55:32 +0000 (20:55 -0400)]
git-worktree.txt: consistently use term "working tree"
As originally composed, git-worktree.txt employed a mix of "worktree"
and "working tree" which was inconsistent and potentially confusing to
readers. bc483285b7 (Documentation/git-worktree: consistently use term
"linked working tree", 2015-07-20) undertook the task of employing the
term "working tree" consistently throughout the document and avoiding
"worktree" altogether for descriptive text. Since that time, some
instances of "worktree" have crept back in. Continue the work of bc483285b7 by transforming these to "working tree", as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree documentation generally does a good job of formatting
literal text using a fixed-width typeface, however, some instances of
unformatted literal text have crept in over time. Fix these.
While at it, also fix a few incorrect typefaces resulting from wrong
choice of Asciidoc quotes.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b79cf959b2 (upload-pack.c: allow banning certain object filter(s),
2020-02-26), we introduced functionality to disallow certain object
filters from being chosen from within 'git upload-pack'. Traditionally,
administrators use this functionality to disallow filters that are known
to perform slowly, for e.g., those that do not have bitmap-level
filtering.
In the past, the '--filter=tree:<n>' was one such filter that does not
have bitmap-level filtering support, and so was likely to be banned by
administrators.
However, in the previous couple of commits, we introduced bitmap-level
filtering for the case when 'n' is equal to '0', i.e., as if we had a
'--filter=tree:none' choice.
While it would be sufficient to simply write
$ git config uploadpackfilter.tree.allow true
(since it would allow all values of 'n'), we would like to be able to
allow this filter for certain values of 'n', i.e., those no greater than
some pre-specified maximum.
In order to do this, introduce a new configuration key, as follows:
$ git config uploadpackfilter.tree.maxDepth <m>
where '<m>' specifies the maximum allowed value of 'n' in the filter
'tree:n'. Administrators who wish to allow for only the value '0' can
write:
Taylor Blau [Mon, 3 Aug 2020 18:00:10 +0000 (14:00 -0400)]
upload-pack.c: allow banning certain object filter(s)
Git clients may ask the server for a partial set of objects, where the
set of objects being requested is refined by one or more object filters.
Server administrators can configure 'git upload-pack' to allow or ban
these filters by setting the 'uploadpack.allowFilter' variable to
'true' or 'false', respectively.
However, administrators using bitmaps may wish to allow certain kinds of
object filters, but ban others. Specifically, they may wish to allow
object filters that can be optimized by the use of bitmaps, while
rejecting other object filters which aren't and represent a perceived
performance degradation (as well as an increased load factor on the
server).
Allow configuring 'git upload-pack' to support object filters on a
case-by-case basis by introducing two new configuration variables:
where '<kind>' may be one of 'blobNone', 'blobLimit', 'tree', and so on.
Setting the second configuration variable for any valid value of
'<kind>' explicitly allows or disallows restricting that kind of object
filter.
If a client requests the object filter <kind> and the respective
configuration value is not set, 'git upload-pack' will default to the
value of 'uploadpackfilter.allow', which itself defaults to 'true' to
maintain backwards compatibility. Note that this differs from
'uploadpack.allowfilter', which controls whether or not the 'filter'
capability is advertised.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit, we will add configuration options that are
specific to each kind of object filter, in which case it is handy to
have a function that translates between 'enum
list_objects_filter_choice' and an appropriate configuration-friendly
string.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 6e6029a8 (fmt-merge-msg: allow merge destination to be omitted again)
we get back the behavior where merges against 'master', by default, do
not include "into 'master'" at the end of the merge message. This test
fix is no longer needed.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 3 Aug 2020 18:41:19 +0000 (18:41 +0000)]
merge: make merge.renormalize work for all uses of merge machinery
The 'merge' command is not the only one that does merges; other commands
like checkout -m or rebase do as well. Unfortunately, the only area of
the code that checked for the "merge.renormalize" config setting was in
builtin/merge.c, meaning it could only affect merges performed by the
"merge" command. Move the handling of this config setting to
merge_recursive_config() so that other commands can benefit from it as
well. Fixes a few tests in t6038.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 3 Aug 2020 18:41:18 +0000 (18:41 +0000)]
t6038: remove problematic test
t6038.11, 'cherry-pick patch from after text=auto' was a test of
undefined behavior. To make matters worse, while there are a couple
possible correct answers, this test was coded to only check for an
obviously incorrect answer. And the final cherry on top is that the
test is marked test_expect_failure, meaning it can't provide much value,
other than possibly confusing future folks who come along and try to
work on attributes and look at existing tests. Because of all these
problems, just remove the test.
But for any future code spelunkers, here's my understanding of the two
possible correct answers:
This test was set up so that on a branch with no .gitattributes file,
you cherry-picked a patch from a branch that had a .gitattributes file
(containing '* text=auto'). Further, the two branches had a file which
differed only in line endings. In this situation, correct behavior is
not well defined: should the .gitattributes file affect the merge or
not?
If the .gitattributes file on the other branch should not affect the
merge, then we would have a content conflict with all three stages
different (the merge base didn't match either side).
If the .gitattributes file from the other branch should affect the
merge, then we would expect the line endings to be normalized to LF for
the version to be recorded in the repository. This would mean that when
doing a three-way content merge on the file that differed in line
endings, that the three-way content merge would see that the versions on
both sides matched and so the cherry-pick has no conflicts and can
succeed. The line endings in the file as recorded in the repository
will change from CRLF to LF. The version checked out in the working
copy will depend on the platform (since there's no eol attribute defined
for the file).
Also, as a final side note, this test expected an error message that was
built assuming cherry-pick was the old scripted version, because
cherry-pick no longer uses the error message that was encoded in this
test. So it was wrong for yet another reason.
Given that the handling of .gitattributes is not well defined and this
test was obviously broken and could do nothing but confuse future
readers, just remove it.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 3 Aug 2020 18:41:17 +0000 (18:41 +0000)]
t6038: make tests fail for the right reason
t6038 had a pair of tests that were expected to fail, but weren't
failing for the expected reason. Both were meant to do a merge that
could be done cleanly after renormalization, but were supposed to fail
for lack of renormalization. Unfortunately, both tests had staged
changes, and checkout -m would abort due to the presence of those staged
changes before even attempting a merge.
Fix this first issue by utilizing git-restore instead of git-checkout,
so that the index is left alone and just the working directory gets the
changes we want.
However, there is a second issue with these tests. Technically, they
just wanted to verify that after renormalization, no conflicts would be
present. This could have been checked for by grepping for a lack of
conflict markers, but the test instead tried to compare the working
directory files to an expected result. Unfortunately, the setting of
"text=auto" without setting core.eol to any value meant that the content
of the file (in particular, the line endings) would be
platform-dependent and the tests could only pass on some platforms.
Replace the existing comparison with a call to 'git diff --no-index
--ignore-cr-at-eol' to verify that the contents, other than possible
carriage returns in the file, match the expected results and in
particular that the file has no conflicts from the checkout -m
operation.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 2 Aug 2020 14:36:50 +0000 (16:36 +0200)]
bisect: use oid_to_hex_r() instead of memcpy()+oid_to_hex()
Write the hexadecimal object ID directly into the destination buffer
using oid_to_hex_r() instead of writing it into a static buffer first
using oid_to_hex() and then copying it from there using memcpy().
This is shorter, simpler and a bit more efficient.
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 2 Aug 2020 03:14:27 +0000 (03:14 +0000)]
merge-recursive: fix unclear and outright wrong comments
Commits 7c0a6c8e47 ("merge-recursive: move some definitions around to
clean up the header", 2019-08-17), and b4db8a2b76 ("merge-recursive:
remove useless parameter in merge_trees()", 2019-08-17) added some
useful documentation to the functions, but had a few places where the
new comments were unclear or even misleading. Fix those comments.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sat, 1 Aug 2020 22:06:11 +0000 (00:06 +0200)]
t1450: fix quoting of NUL byte when corrupting pack
We use
printf '\0'
to generate a NUL byte which we then `dd` into the packfile to ensure
that we modify the first byte of the first object, thereby
(probabilistically) invalidating the checksum. Except the single quotes
we're using are interpreted to match with the ones we enclose the whole
test in. So we actually execute
printf \0
and end up injecting the ASCII code for "0", 0x30, instead.
The comment right above this `printf` invocation says that "at least one
of [the type bits] is not zero, so setting the first byte to 0 is
sufficient". Substituting "0x30" for "0" in that comment won't do: we'd
need to reason about which bits go where and just what the packfile
looks like that we're modifying in this test.
Let's avoid all of that by actually executing
printf "\0"
to generate a NUL byte, as intended.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Fri, 31 Jul 2020 23:32:14 +0000 (19:32 -0400)]
worktree: retire special-case normalization of main worktree path
In order for "git-worktree list" to present consistent results,
get_main_worktree() performs manual normalization on the repository
path (returned by get_common_dir()) after passing it through
strbuf_add_absolute_path(). In particular, it cleans up the path for
three distinct cases when the current working directory is (1) the main
worktree, (2) the .git/ subdirectory, or (3) a bare repository.
The need for such special-cases is a direct consequence of employing
strbuf_add_absolute_path() which, for the sake of efficiency, doesn't
bother normalizing the path (such as folding out redundant path
components) after making it absolute. Lack of normalization is not
typically a problem since redundant path elements make no difference
when working with paths at the filesystem level. However, when preparing
paths for presentation, possible redundant path components make it
difficult to ensure consistency.
Eliminate the need for these special cases by instead making the path
absolute via strbuf_add_real_path() which normalizes the path for us.
Once normalized, the only case we need to handle manually is converting
it to the path of the main worktree by stripping the "/.git" suffix.
This stripping of the "/.git" suffix is a regular idiom in
worktree-related code; for instance, it is employed by
get_linked_worktree(), as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Fri, 31 Jul 2020 23:32:13 +0000 (19:32 -0400)]
worktree: drop bogus and unnecessary path munging
The content of .git/worktrees/<id>/gitdir must be a path of the form
"/path/to/worktree/.git". Any other content would be indicative of a
corrupt "gitdir" file. To determine the path of the worktree itself one
merely strips the "/.git" suffix, and this is indeed how the worktree
path was determined from inception.
However, 5193490442 (worktree: add a function to get worktree details,
2015-10-08) extended the path manipulation in a mysterious way. If it is
unable to strip "/.git" from the path, then it instead reports the
current working directory as the linked worktree's path:
if (!strbuf_strip_suffix(&worktree_path, "/.git")) {
strbuf_reset(&worktree_path);
strbuf_add_absolute_path(&worktree_path, ".");
strbuf_strip_suffix(&worktree_path, "/.");
}
This logic is clearly bogus; it can never be generally correct behavior.
It materialized out of thin air in 5193490442 with neither explanation
nor tests to illustrate a case in which it would be desirable.
It's possible that this logic was introduced to somehow deal with a
corrupt "gitdir" file, so that it returns _some_ sort of meaningful
value, but returning the current working directory is not helpful. In
fact, it is quite misleading (except in the one specific case when the
current directory is the worktree whose "gitdir" entry is corrupt).
Moreover, reporting the corrupt value to the user, rather than fibbing
about it and hiding it outright, is more helpful since it may aid in
diagnosing the problem.
Therefore, drop this bogus path munging and restore the logic to the
original behavior of merely stripping "/.git".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Fri, 31 Jul 2020 23:32:11 +0000 (19:32 -0400)]
worktree: drop pointless strbuf_release()
The content of this strbuf is unconditionally detached several lines
before the strbuf_release() and the strbuf is never touched again after
that point.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Fri, 31 Jul 2020 18:26:07 +0000 (20:26 +0200)]
t6300: fix issues related to %(contents:size)
b6839fda68 (ref-filter: add support for %(contents:size), 2020-07-16)
added a new format for ref-filter, and added a function to generate
tests for this new feature in t6300. Unfortunately, it tries to run
`test_expect_sucess' instead of `test_expect_success', and writes
$expect to `expected', but tries to read `expect'. Those two issues
were probably unnoticed because the script only printed errors, but did
not crash. This fixes these issues.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs: move the logic to add \t to reflog to the files backend
523fa69c (reflog: cleanse messages in the refs.c layer, 2020-07-10)
centralized reflog normalizaton. However, the normalizaton added a
leading "\t" to the message. This is an artifact of the reflog
storage format in the files backend, so it should be added there.
Routines that parse back the reflog (such as grab_nth_branch_switch)
expect the "\t" to not be in the message, so without this fix, git
with reftable cannot process the "@{-1}" syntax.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 29 Jul 2020 00:37:20 +0000 (20:37 -0400)]
strvec: rename struct fields
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 30 Jul 2020 20:20:35 +0000 (13:20 -0700)]
Merge branch 'ct/mv-unmerged-path-error' into master
"git mv src dst", when src is an unmerged path, errored out
correctly but with an incorrect error message to claim that src is
not tracked, which has been clarified.
* ct/mv-unmerged-path-error:
git-mv: improve error message for conflicted file
Junio C Hamano [Thu, 30 Jul 2020 20:20:34 +0000 (13:20 -0700)]
Merge branch 'bc/push-cas-cquoted-refname' into master
Pushing a ref whose name contains non-ASCII character with the
"--force-with-lease" option did not work over smart HTTP protocol,
which has been corrected.
* bc/push-cas-cquoted-refname:
remote-curl: make --force-with-lease work with non-ASCII ref names
* cc/pretty-contents-size:
ref-filter: add support for %(contents:size)
t6300: test refs pointing to tree and blob
Documentation: clarify %(contents:XXXX) doc
Junio C Hamano [Thu, 30 Jul 2020 20:20:32 +0000 (13:20 -0700)]
Merge branch 'jt/avoid-lazy-fetching-upon-have-check' into master
Fetching from a lazily cloned repository resulted at the server
side in attempts to lazy fetch objects that the client side has,
many of which will not be available from the third-party anyway.
* jt/avoid-lazy-fetching-upon-have-check:
upload-pack: do not lazy-fetch "have" objects
Junio C Hamano [Thu, 30 Jul 2020 20:20:32 +0000 (13:20 -0700)]
Merge branch 'dl/test-must-fail-fixes-6' into master
Dev support to limit the use of test_must_fail to only git commands.
* dl/test-must-fail-fixes-6:
test-lib-functions: restrict test_must_fail usage
t9400: don't use test_must_fail with cvs
t9834: remove use of `test_might_fail p4`
t7107: don't use test_must_fail()
t5324: reorder `run_with_limited_open_files test_might_fail`
t3701: stop using `env` in force_color()
Junio C Hamano [Thu, 30 Jul 2020 20:20:32 +0000 (13:20 -0700)]
Merge branch 'jk/reject-newer-extensions-in-v0' into master
With the base fix to 2.27 regresion, any new extensions in a v0
repository would still be silently honored, which is not quite
right. Instead, complain and die loudly.
* jk/reject-newer-extensions-in-v0:
verify_repository_format(): complain about new extensions in v0 repo
Junio C Hamano [Thu, 30 Jul 2020 20:20:32 +0000 (13:20 -0700)]
Merge branch 'hn/reftable' into master
Preliminary clean-up of the refs API in preparation for adding a
new refs backend "reftable".
* hn/reftable:
reflog: cleanse messages in the refs.c layer
bisect: treat BISECT_HEAD as a pseudo ref
t3432: use git-reflog to inspect the reflog for HEAD
lib-t6000.sh: write tag using git-update-ref
Junio C Hamano [Thu, 30 Jul 2020 20:20:32 +0000 (13:20 -0700)]
Merge branch 'bw/fail-cloning-into-non-empty' into master
"git clone --separate-git-dir=$elsewhere" used to stomp on the
contents of the existing directory $elsewhere, which has been
taught to fail when $elsewhere is not an empty directory.
* bw/fail-cloning-into-non-empty:
git clone: don't clone into non-empty directory
Junio C Hamano [Thu, 30 Jul 2020 20:20:31 +0000 (13:20 -0700)]
Merge branch 'pb/log-rev-list-doc' into master
"git help log" has been enhanced by sharing more material from the
documentation for the underlying "git rev-list" command.
* pb/log-rev-list-doc:
git-log.txt: include rev-list-description.txt
git-rev-list.txt: move description to separate file
git-rev-list.txt: tweak wording in set operations
git-rev-list.txt: fix Asciidoc syntax
revisions.txt: describe 'rev1 rev2 ...' meaning for ranges
git-log.txt: add links to 'rev-list' and 'diff' docs
Junio C Hamano [Thu, 30 Jul 2020 20:20:31 +0000 (13:20 -0700)]
Merge branch 'ds/commit-graph-bloom-updates' into master
Updates to the changed-paths bloom filter.
* ds/commit-graph-bloom-updates:
commit-graph: check all leading directories in changed path Bloom filters
revision: empty pathspecs should not use Bloom filters
revision.c: fix whitespace
commit-graph: check chunk sizes after writing
commit-graph: simplify chunk writes into loop
commit-graph: unify the signatures of all write_graph_chunk_*() functions
commit-graph: persist existence of changed-paths
bloom: fix logic in get_bloom_filter()
commit-graph: change test to die on parse, not load
commit-graph: place bloom_settings in context
Junio C Hamano [Thu, 30 Jul 2020 20:20:30 +0000 (13:20 -0700)]
Merge branch 'sg/commit-graph-cleanups' into master
The changed-path Bloom filter is improved using ideas from an
independent implementation.
* sg/commit-graph-cleanups:
commit-graph: simplify write_commit_graph_file() #2
commit-graph: simplify write_commit_graph_file() #1
commit-graph: simplify parse_commit_graph() #2
commit-graph: simplify parse_commit_graph() #1
commit-graph: clean up #includes
diff.h: drop diff_tree_oid() & friends' return value
commit-slab: add a function to deep free entries on the slab
commit-graph-format.txt: all multi-byte numbers are in network byte order
commit-graph: fix parsing the Chunk Lookup table
tree-walk.c: don't match submodule entries for 'submod/anything'
Junio C Hamano [Wed, 29 Jul 2020 22:50:01 +0000 (15:50 -0700)]
fmt-merge-msg: allow merge destination to be omitted again
In Git 2.28, we stopped special casing 'master' when producing the
default merge message by just removing the code to squelch "into
'master'" at the end of the message.
Introduce multi-valued merge.suppressDest configuration variable
that gives a set of globs to match against the name of the branch
into which the merge is being made, to let users specify for which
branch fmt-merge-msg's output should be shortened. When it is not
set, 'master' is used as the sole value of the variable by default.
The above move mostly reverts the pre-2.28 default in repositories
that have no relevant configuration.
Add a few tests to protect the behaviour with the new configuration
variable from future regression.
Helped-by: Linus Torvalds <torvalds@linux-foundation.org> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 489947cee5095b168cbac111ff7bd1eadbbd90dd, which
stopped treating merges into the 'master' branch as special when
preparing the default merge message. As the goal was not to have
any single branch designated as special, it solved it by leaving the
"into <branchname>" at the end of the title of the default merge
message for any and all branches. An obvious and easy alternative
to treat everybody equally could have been to remove it for every
branch, but that involves loss of information.
We'll introduce a new mechanism to let end-users specify merges into
which branches would omit the "into <branchname>" from the title of
the default merge message, and make the mechanism, when unconfigured,
treat the traditional 'master' special again, so all the changes to
the tests we made earlier will become unnecessary, as these tests
will be run without configuring the said new mechanism.
brian m. carlson [Wed, 29 Jul 2020 23:14:28 +0000 (23:14 +0000)]
t: remove test_oid_init in tests
Now that we call test_oid_init in the setup for all test scripts,
there's no point in calling it individually. Remove all of the places
where we've done so to help keep tests tidy.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:27 +0000 (23:14 +0000)]
docs: add documentation for extensions.objectFormat
Document the extensions.objectFormat config setting. Warn users not to
modify it themselves.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:26 +0000 (23:14 +0000)]
ci: run tests with SHA-256
Now that we have Git supporting SHA-256, we'd like to make sure that we
don't regress that state. Unfortunately, it's easy to do so, so to
help, let's add code to run one of our CI jobs with SHA-256 as the
default hash. This will help us detect any problems that may occur.
We pick the linux-clang job because it's relatively fast and the
linux-gcc job already runs the testsuite twice. We want our tests to
run as fast as possible, so we wouldn't want to add a third run to the
linux-gcc job. To make sure we properly exercise the code, let's run
the tests in the default mode (SHA-1) first and then run a second time
with SHA-256. We explicitly specify SHA-1 for the first run so that if
we change the default in the future, we make sure to test both cases.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:25 +0000 (23:14 +0000)]
t: make SHA1 prerequisite depend on default hash
Currently, the SHA1 prerequisite depends on the output of git
hash-object. However, in order for that to produce sane behavior, we
must be in a repository. If we are not, the default will remain SHA-1,
and we'll produce wrong results if we're using SHA-256 for the testsuite
but the test assertion starts when we're not in a repository.
Check the environment variable we use for this purpose, leaving it to
default to SHA-1 if none is specified.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:24 +0000 (23:14 +0000)]
t: allow testing different hash algorithms via environment
To allow developers to run the testsuite with a different algorithm than
the default, provide an environment variable, GIT_TEST_DEFAULT_HASH, to
specify the algorithm to use. Compute the fixed constants using
test_oid. Move the constant initialization down below the point where
test-lib-functions.sh is loaded so the functions are defined.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:23 +0000 (23:14 +0000)]
t: add test_oid option to select hash algorithm
In some tests, we have data files which are written with a particular
hash algorithm. Instead of keeping two copies of the test files, we can
keep one, and translate the value on the fly.
In order to do so, we'll need to read both the source algorithm and the
current algorithm, so add an optional flag to the test_oid helper that
lets us look up a value for a specified hash algorithm. This should
not cause any conflicts with existing tests, since key arguments to
test_oid are allowed to contains only shell identifier characters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:22 +0000 (23:14 +0000)]
repository: enable SHA-256 support by default
Now that we have a complete SHA-256 implementation in Git, let's enable
it so people can use it. Remove the ENABLE_SHA256 define constant
everywhere it's used. Add tests for initializing a repository with
SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:21 +0000 (23:14 +0000)]
setup: add support for reading extensions.objectformat
The transition plan specifies extensions.objectFormat as the indication
that we're using a given hash in a certain repo. Read this as one of
the extensions we support. If the user has specified an invalid value,
fail.
Ensure that we reject the extension if the repository format version is
0.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:20 +0000 (23:14 +0000)]
bundle: add new version for use with SHA-256
Currently we detect the hash algorithm in use by the length of the
object ID. This is inelegant and prevents us from using a different
hash algorithm that is also 256 bits in length.
Since we cannot extend the v2 format in a backward-compatible way, let's
add a v3 format, which is identical, except for the addition of
capabilities, which are prefixed by an at sign. We add "object-format"
as the only capability and reject unknown capabilities, since we do not
have a network connection and therefore cannot negotiate with the other
side.
For compatibility, default to the v2 format for SHA-1 and require v3
for SHA-256.
In t5510, always use format v3 so we can be sure we produce consistent
results across hash algorithms. Since head -n N lists the top N lines
instead of the Nth line, let's run our output through sed to normalize
it and compare it against a fixed value, which will make sure we get
exactly what we're expecting.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:19 +0000 (23:14 +0000)]
builtin/verify-pack: implement an --object-format option
A recently added test in t5702 started using git verify-pack outside of
a repository. While this poses no problems with SHA-1, with SHA-256 we
implicitly rely on the setup of the repository to initialize our hash
algorithm settings.
Since we're not in a repository here, we need to provide git verify-pack
help to set things up properly. git index-pack already knows an
--object-format option, so let's accept one as well and pass it down to
our git index-pack invocation. Since we're now dynamically adjusting
the elements in argv, let's switch to using struct argv_array to manage
them. Finally, let's make t5702 pass the proper argument on down to its
git verify-pack caller.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:18 +0000 (23:14 +0000)]
http-fetch: set up git directory before parsing pack hashes
In dd4b732df7 ("upload-pack: send part of packfile response as uri",
2020-06-10), the git http-fetch code learned how to take ac --packfile
option. This option takes an argument, which is the name of a packfile
hash, and parses it using parse_oid_hex. It does so before calling
setup_git_directory.
However, in a SHA-256 repository this fails to work, since we have not
set the hash algorithm in use and parse_oid_hex fails as a consequence.
To ensure that we can parse packfile hashes of the right length, let's
set up the git directory before we start parsing arguments.
Since we still want to allow the invocation of -h to print the help when
we're not in a repository, gracefully handle us being outside of one and
produce an error after argument parsing has finished.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:17 +0000 (23:14 +0000)]
t0410: mark test with SHA1 prerequisite
These tests try to check that we behave properly if we encounter a
repository with version 0 but an extension. This is a laudable goal,
but the test cannot work with SHA-256, since SHA-256 repositories always
have an existing extension and are never version 0.
Add a SHA1 prerequisite to these tests.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:16 +0000 (23:14 +0000)]
t5308: make test work with SHA-256
This test needs multiple object IDs that have the same first byte.
Update the pack test code to generate a suitable packed value for
SHA-256. Update the test to use this value when using SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:15 +0000 (23:14 +0000)]
t9700: make hash size independent
The Perl test script for t9700 was matching on exactly 40 hex
characters. With SHA-256, we'll have 64 hex-character object IDs.
Create a variable with a regex which matches exactly 40 or 64 hex
characters and use that to match the output. Note that both of the uses
of this can be anchored, which makes the code simpler, so do that as
well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 29 Jul 2020 23:14:14 +0000 (23:14 +0000)]
t9500: ensure that algorithm info is preserved in config
When we use a hash algorithm other than SHA-1, it's important to
preserve the hash-related values in the config file, but this test
overwrites the config file with a new one. Ensure we copy these values
properly from the old config to the new one so that the repository can
be read if it's using SHA-256.
Note that if there is no extensions.objectFormat value set, git config
will return unsuccessfully if we try to read it; since this is not an
error for us, use test_might_fail.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
