libvirt: Update version to 8.10.0

- Update from version 8.9.0 to 8.10.0
- Update of rootfile
- Changelog
    v8.10.0 (2022-12-01)
	**New features**
		  * Tool for validating SEV firmware boot measurement of QEMU VMs
		     The ``virt-qemu-sev-validate`` program will compare a reported SEV/SEV-ES
		     domain launch measurement, to a computed launch measurement. This
		     determines whether the domain has been tampered with during launch.
		  * Support for SGX EPC (enclave page cache)
		     Users can add a ``<memory model='sgx-epc'>`` device to lauch a VM with
		     ``Intel Software Guard Extensions``.
		  * Support migration of vTPM state of QEMU vms on shared storage
		     Pass ``--migration`` option if appropriate in order for ``swtpm`` to
		     properly migrate on shared storage.
	**Improvements**
		  * Mark close callback (un-)register API as high priority
		     High priority APIs use a separate thread pool thus can help in eliminating
		     problems with stuck VMs. Marking the close callback API as high priority
		     allows ``virsh`` to properly connect to the daemon in case the normal
		     priority workers are stuck allowing other high priority API usage.
		  * Updated x86 CPU features
		     The following features for the x86 platform were added:
		      ``v-vmsave-vmload``, ``vgif``, ``avx512-vp2intersect``, ``avx512-fp16``,
		      ``serialize``, ``tsx-ldtrk``, ``arch-lbr``, ``xfd``, ``intel-pt-lip``,
		      ``avic``, ``sgx``, ``sgxlc``, ``sgx-exinfo``, ``sgx1``, ``sgx2``,
		      ``sgx-debug``, ``sgx-mode64``, ``sgx-provisionkey``, ``sgx-tokenkey``,
		      ``sgx-kss``, ``bus-lock-detect``, ``pks``, ``amx``.
		  * Add support for ``hv-avic`` Hyper-V enlightenment
		     ``qemu-6.2`` introduced support for the ``hv-avic`` enlightenment which
		     allows to use Hyper-V SynIC with hardware APICv/AVIC enabled.
		  * qemu: Run memory preallocation with numa-pinned threads
		     Run the thread allocating memory in the proper NUMA node to reduce overhead.
		  * RPM packaging changes
		    - add optional dependancy of ``libvirt-daemon`` on ``libvirt-client``
		       The ``libvirt-guests.`` tool requires the ``virsh`` client to work
		       properly, but we don't want to require the installation of the daemon
		       if the tool is not used.
		    - relax required ``python3-libvirt`` version for ``libvirt-client-qemu``
		       The ``virt-qemu-qmp-proxy`` tool requires python but doesn't strictly
		       need the newest version. Remove the strict versioning requirement in
		       order to prevent cyclic dependency when building.
	**Bug fixes**
		  * Skip initialization of ``cache`` capabilities if host doesn't support them
		     Hypervisor drivers would fail to initialize on ``aarch64`` hosts with
		     following error ::
		       virStateInitialize:657 : Initialisation of cloud-hypervisor state driver failed: no error
		     which prevented the startup of the daemon.
		  * Allow incoming connections to guests on routed networks w/firewalld
		     A change in handling of implicit rules in ``firewalld 1.0.0`` broke
		     incomming connections to VMs when using ``routed`` network. This is fixed
		     by adding a new ``libvirt-routed`` zone configured to once again allow
		     incoming sessions to guests on routed networks.
		  * Fix infinite loop in nodedev driver
		     Certain udev entries might be of a size that makes libudev emit EINVAL
		     which caused a busy loop burning CPU. Fix it by ignoring the return code.

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>

diff --git a/config/rootfiles/packages/libvirt b/config/rootfiles/packages/libvirt
index 5682b73c8a0ed0f38628e143a189e4d7d332f430..8b3819aa5d6b39b496920dacf4fa1c49059b812d 100644 (file)
--- a/config/rootfiles/packages/libvirt
+++ b/config/rootfiles/packages/libvirt
@@ -60,6 +60,7 @@ usr/bin/virt-pki-query-dn
 usr/bin/virt-pki-validate
 usr/bin/virt-qemu-qmp-proxy
 usr/bin/virt-qemu-run
+usr/bin/virt-qemu-sev-validate
 usr/bin/virt-ssh-helper
 usr/bin/virt-xml-validate
 #usr/include/libvirt
@@ -84,16 +85,16 @@ usr/bin/virt-xml-validate
 #usr/lib/libvirt
 #usr/lib/libvirt-admin.so
 usr/lib/libvirt-admin.so.0
-usr/lib/libvirt-admin.so.0.8009.0
+usr/lib/libvirt-admin.so.0.8010.0
 #usr/lib/libvirt-lxc.so
 usr/lib/libvirt-lxc.so.0
-usr/lib/libvirt-lxc.so.0.8009.0
+usr/lib/libvirt-lxc.so.0.8010.0
 #usr/lib/libvirt-qemu.so
 usr/lib/libvirt-qemu.so.0
-usr/lib/libvirt-qemu.so.0.8009.0
+usr/lib/libvirt-qemu.so.0.8010.0
 #usr/lib/libvirt.so
 usr/lib/libvirt.so.0
-usr/lib/libvirt.so.0.8009.0
+usr/lib/libvirt.so.0.8010.0
 #usr/lib/libvirt/connection-driver
 usr/lib/libvirt/connection-driver/libvirt_driver_ch.so
 usr/lib/libvirt/connection-driver/libvirt_driver_interface.so
@@ -317,6 +318,7 @@ usr/share/libvirt/schemas/nodedev.rng
 usr/share/libvirt/schemas/nwfilter.rng
 usr/share/libvirt/schemas/nwfilter_params.rng
 usr/share/libvirt/schemas/nwfilterbinding.rng
+usr/share/libvirt/schemas/privatedata.rng
 usr/share/libvirt/schemas/secret.rng
 usr/share/libvirt/schemas/storagecommon.rng
 usr/share/libvirt/schemas/storagepool.rng

diff --git a/lfs/libvirt b/lfs/libvirt
index aa28ef2dc6bd8d001bfbe9fff896c355808391fa..bb7abbb284214f0bdc5dcd909f30b2125a3f817f 100644 (file)
--- a/lfs/libvirt
+++ b/lfs/libvirt
@@ -26,7 +26,7 @@ include Config
 
 SUMMARY           = Server side daemon and supporting files for libvirt
 
-VER        = 8.9.0
+VER        = 8.10.0
 
 THISAPP    = libvirt-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -35,7 +35,7 @@ DIR_APP    = $(DIR_SRC)/$(THISAPP)
 TARGET     = $(DIR_INFO)/$(THISAPP)
 SUP_ARCH   = x86_64 aarch64
 PROG       = libvirt
-PAK_VER    = 30
+PAK_VER    = 31
 
 DEPS       = ebtables libpciaccess libtirpc libyajl ncat qemu
 
@@ -49,7 +49,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_BLAKE2 = 537b6badb6171110e99561613fb1318144991107139401296248afb747ae6f9cfafcd17b2292b8d8dcc9188ff4206035ea814efa6c129bae50c0518f61be9b81
+$(DL_FILE)_BLAKE2 = 6c99428dd74ae1e535d0918bb48da0a851b03e9dfc38f96fca060a33b6be6c23c8b4a789695e8cf930536c156c8a893e18753a58c8a827f464b83a61b47c4846
 
 install : $(TARGET)
 check : $(patsubst %,$(DIR_CHK)/%,$(objects))