TOOLCHAINVER=20171121
+###############################################################################
+#
+# Beautifying variables & presentation & input output interface
+#
+###############################################################################
+
+## Screen Dimentions
+# Find current screen size
+if [ -z "${COLUMNS}" ]; then
+ COLUMNS=$(stty size)
+ COLUMNS=${COLUMNS##* }
+fi
+
+# When using remote connections, such as a serial port, stty size returns 0
+if [ "${COLUMNS}" = "0" ]; then
+ COLUMNS=80
+fi
+
+## Measurements for positioning result messages
+RESULT_WIDTH=4
+TIME_WIDTH=8
+OPT_WIDTH=6
+VER_WIDTH=10
+RESULT_COL=$((${COLUMNS} - $RESULT_WIDTH - 4))
+TIME_COL=$((${RESULT_COL} - $TIME_WIDTH - 5))
+OPT_COL=$((${TIME_COL} - $OPT_WIDTH - 5))
+VER_COL=$((${OPT_COL} - $VER_WIDTH - 5))
+
+## Set Cursur Position Commands, used via echo -e
+SET_RESULT_COL="\\033[${RESULT_COL}G"
+SET_TIME_COL="\\033[${TIME_COL}G"
+SET_OPT_COL="\\033[${OPT_COL}G"
+SET_VER_COL="\\033[${VER_COL}G"
+
+# Define color for messages
+BOLD="\\033[1;39m"
+DONE="\\033[1;32m"
+SKIP="\\033[1;34m"
+WARN="\\033[1;35m"
+FAIL="\\033[1;31m"
+NORMAL="\\033[0;39m"
+
# New architecture variables
HOST_ARCH="$(uname -m)"
+PWD=$(pwd)
+BASENAME=$(basename $0)
+
# Debian specific settings
if [ ! -e /etc/debian_version ]; then
FULLPATH=`which $0`
fi
fi
-PWD=`pwd`
-BASENAME=`basename $0`
-BASEDIR=`echo $FULLPATH | sed "s/\/$BASENAME//g"`
+# This is the directory where make.sh is in
+BASEDIR=$(echo $FULLPATH | sed "s/\/$BASENAME//g")
+
LOGFILE=$BASEDIR/log/_build.preparation.log
export BASEDIR LOGFILE
DIR_CHK=$BASEDIR/cache/check
mkdir $BASEDIR/log/ 2>/dev/null
+system_processors() {
+ getconf _NPROCESSORS_ONLN 2>/dev/null || echo "1"
+}
+
+system_memory() {
+ local key val unit
+
+ while read -r key val unit; do
+ case "${key}" in
+ MemTotal:*)
+ # Convert to MB
+ echo "$(( ${val} / 1024 ))"
+ break
+ ;;
+ esac
+ done < /proc/meminfo
+}
+
+configure_build() {
+ local build_arch="${1}"
+
+ if [ "${build_arch}" = "default" ]; then
+ build_arch="$(configure_build_guess)"
+ fi
+
+ case "${build_arch}" in
+ x86_64)
+ BUILDTARGET="${build_arch}-unknown-linux-gnu"
+ CROSSTARGET="${build_arch}-cross-linux-gnu"
+ BUILD_PLATFORM="x86"
+ CFLAGS_ARCH="-m64 -mtune=generic"
+ ;;
+
+ i586)
+ BUILDTARGET="${build_arch}-pc-linux-gnu"
+ CROSSTARGET="${build_arch}-cross-linux-gnu"
+ BUILD_PLATFORM="x86"
+ CFLAGS_ARCH="-march=i586 -mtune=generic -fomit-frame-pointer"
+ ;;
+
+ aarch64)
+ BUILDTARGET="${build_arch}-unknown-linux-gnu"
+ CROSSTARGET="${build_arch}-cross-linux-gnu"
+ BUILD_PLATFORM="arm"
+ CFLAGS_ARCH=""
+ ;;
+
+ armv7hl)
+ BUILDTARGET="${build_arch}-unknown-linux-gnueabi"
+ CROSSTARGET="${build_arch}-cross-linux-gnueabi"
+ BUILD_PLATFORM="arm"
+ CFLAGS_ARCH="-march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard"
+ ;;
+
+ armv5tel)
+ BUILDTARGET="${build_arch}-unknown-linux-gnueabi"
+ CROSSTARGET="${build_arch}-cross-linux-gnueabi"
+ BUILD_PLATFORM="arm"
+ CFLAGS_ARCH="-march=armv5te -mfloat-abi=soft -fomit-frame-pointer"
+ ;;
+
+ *)
+ exiterror "Cannot build for architure ${build_arch}"
+ ;;
+ esac
+
+ # Check if the QEMU helper is available if needed.
+ if qemu_is_required "${build_arch}"; then
+ local qemu_build_helper="$(qemu_find_build_helper_name "${build_arch}")"
+
+ if [ -n "${qemu_build_helper}" ]; then
+ QEMU_TARGET_HELPER="${qemu_build_helper}"
+ else
+ exiterror "Could not find a binfmt_misc helper entry for ${build_arch}"
+ fi
+ fi
+
+ BUILD_ARCH="${build_arch}"
+ TOOLS_DIR="/tools_${BUILD_ARCH}"
+
+ # Enables hardening
+ HARDENING_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4"
+
+ CFLAGS="-O2 -pipe -Wall -fexceptions -fPIC ${CFLAGS_ARCH}"
+ CXXFLAGS="${CFLAGS}"
+
+ # Determine parallelism
+ if [ -z "${MAKETUNING}" ]; then
+ # We assume that each process consumes about
+ # 192MB of memory. Therefore we find out how
+ # many processes fit into memory.
+ local mem_max=$(( ${HOST_MEM} / 192 ))
+
+ local processors="$(system_processors)"
+ local cpu_max=$(( ${processors} * 2 ))
+
+ local parallelism
+ if [ ${mem_max} -lt ${cpu_max} ]; then
+ parallelism=${mem_max}
+ else
+ parallelism=${cpu_max}
+ fi
+
+ MAKETUNING="-j${parallelism}"
+ fi
+}
+
+configure_build_guess() {
+ case "${HOST_ARCH}" in
+ x86_64|i686|i586)
+ echo "i586"
+ ;;
+
+ aarch64)
+ echo "aarch64"
+ ;;
+
+ armv7*|armv6*|armv5*)
+ echo "armv5tel"
+ ;;
+
+ *)
+ exiterror "Cannot guess build architecture"
+ ;;
+ esac
+}
+
+evaluate() {
+ if [ "$?" -eq "0" ]; then
+ beautify message DONE
+ else
+ EXITCODE=$1
+ shift 1
+ beautify message FAIL
+ $*
+ if [ $EXITCODE -ne "0" ]; then
+ exit $EXITCODE
+ fi
+ fi
+}
+
+position_cursor() {
+ # ARG1=starting position on screen
+ # ARG2=string to be printed
+ # ARG3=offset, negative for left movement, positive for right movement, relative to ARG1
+ # For example if your starting position is column 50 and you want to print Hello three columns to the right
+ # of your starting position, your call will look like this:
+ # position_cursor 50 "Hello" 3 (you'll get the string Hello at position 53 (= 50 + 3)
+ # If on the other hand you want your string "Hello" to end three columns to the left of position 50,
+ # your call will look like this:
+ # position_cursor 50 "Hello" -3 (you'll get the string Hello at position 42 (= 50 - 5 -3)
+ # If you want to start printing at the exact starting location, use offset 0
+
+ START=$1
+ STRING=$2
+ OFFSET=$3
+
+ STRING_LENGTH=${#STRING}
+
+ if [ ${OFFSET} -lt 0 ]; then
+ COL=$((${START} + ${OFFSET} - ${STRING_LENGTH}))
+ else
+ COL=$((${START} + ${OFFSET}))
+ fi
+
+ SET_COL="\\033[${COL}G"
+
+ echo $SET_COL
+}
+
+beautify() {
+ # Commands: build_stage, make_pkg, message, result
+ case "$1" in
+ message)
+ case "$2" in
+ DONE)
+ echo -ne "${SET_RESULT_COL}[${DONE} DONE ${NORMAL}]\n"
+ ;;
+ WARN)
+ echo -ne "${WARN}${3}${NORMAL}${SET_RESULT_COL}[${WARN} WARN ${NORMAL}]\n"
+ ;;
+ FAIL)
+ echo -ne "${SET_RESULT_COL}[${FAIL} FAIL ${NORMAL}]\n"
+ ;;
+ SKIP)
+ echo -ne "${SET_RESULT_COL}[${SKIP} SKIP ${NORMAL}]\n"
+ ;;
+ esac
+ ;;
+ build_stage)
+ MESSAGE=$2
+ if [ "$STAGE_TIME_START" ]; then
+ LAST_STAGE_TIME=$[ `date +%s` - $STAGE_TIME_START ]
+ fi
+ STAGE_TIME_START=`date +%s`
+ echo -ne "${BOLD}*** (${BUILD_ARCH}) ${MESSAGE}${NORMAL}"
+ if [ "$LAST_STAGE_TIME" ]; then
+ echo -ne "${DONE} (Last stage took $LAST_STAGE_TIME secs)${NORMAL}\n"
+ fi
+ echo -ne "${BOLD}${SET_VER_COL} version${SET_OPT_COL} options${SET_TIME_COL} time (sec)${SET_RESULT_COL} status${NORMAL}\n"
+ ;;
+ build_start)
+ BUILD_TIME_START=`date +%s`
+ ;;
+ build_end)
+ BUILD_TIME_END=`date +%s`
+ seconds=$[ $BUILD_TIME_END - $BUILD_TIME_START ]
+ hours=$((seconds / 3600))
+ seconds=$((seconds % 3600))
+ minutes=$((seconds / 60))
+ seconds=$((seconds % 60))
+
+ echo -ne "${DONE}***Build is finished now and took $hours hour(s) $minutes minute(s) $seconds second(s)!${NORMAL}\n"
+ ;;
+ make_pkg)
+ echo "$2" | while read PKG_VER PROGRAM OPTIONS
+ do
+ SET_VER_COL_REAL=`position_cursor $OPT_COL $PKG_VER -3`
+
+ if [ "$OPTIONS" == "" ]; then
+ echo -ne "${PROGRAM}${SET_VER_COL}[ ${BOLD}${SET_VER_COL_REAL}${PKG_VER}"
+ echo -ne "${NORMAL} ]${SET_RESULT_COL}"
+ else
+ echo -ne "${PROGRAM}${SET_VER_COL}[ ${BOLD}${SET_VER_COL_REAL}${PKG_VER}"
+ echo -ne "${NORMAL} ]${SET_OPT_COL}[ ${BOLD}${OPTIONS}"
+ echo -ne "${NORMAL} ]${SET_RESULT_COL}"
+ fi
+ done
+ ;;
+ result)
+ RESULT=$2
+
+ if [ ! $3 ]; then
+ PKG_TIME=0
+ else
+ PKG_TIME=$3
+ fi
+
+ SET_TIME_COL_REAL=`position_cursor $RESULT_COL $PKG_TIME -3`
+ case "$RESULT" in
+ DONE)
+ echo -ne "${SET_TIME_COL}[ ${BOLD}${SET_TIME_COL_REAL}$PKG_TIME${NORMAL} ]"
+ echo -ne "${SET_RESULT_COL}[${DONE} DONE ${NORMAL}]\n"
+ ;;
+ FAIL)
+ echo -ne "${SET_TIME_COL}[ ${BOLD}${SET_TIME_COL_REAL}$PKG_TIME${NORMAL} ]"
+ echo -ne "${SET_RESULT_COL}[${FAIL} FAIL ${NORMAL}]\n"
+ ;;
+ SKIP)
+ echo -ne "${SET_RESULT_COL}[${SKIP} SKIP ${NORMAL}]\n"
+ ;;
+ esac
+ ;;
+ esac
+}
+
+get_pkg_ver() {
+ PKG_VER=`grep -E "^VER |^VER=|^VER " $1 | awk '{print $3}'`
+
+ if [ -z $PKG_VER ]; then
+ PKG_VER=`grep "Exp " $1 | awk '{print $4}'`
+ fi
+ if [ -z $PKG_VER ]; then
+ PKG_VER="?"
+ fi
+ if [ ${#PKG_VER} -gt $VER_WIDTH ]; then
+ # If a package version number is greater than $VER_WIDTH, we keep the first 4 characters
+ # and replace enough characters to fit the resulting string on the screen. We'll replace
+ # the extra character with .. (two dots). That's why the "+ 2" in the formula below.
+ # Example: if we have a 21-long version number that we want to fit into a 10-long space,
+ # we have to remove 11 characters. But if we replace 11 characters with 2 characters, we'll
+ # end up with a 12-character long string. That's why we replace 12 characters with ..
+ REMOVE=`expr substr "$PKG_VER" 4 $[ ${#PKG_VER} - $VER_WIDTH + 2 ]`
+ PKG_VER=`echo ${PKG_VER/$REMOVE/..}`
+ fi
+
+ echo "$PKG_VER"
+}
+
+stdumount() {
+ umount $BASEDIR/build/sys 2>/dev/null;
+ umount $BASEDIR/build/dev/shm 2>/dev/null;
+ umount $BASEDIR/build/dev/pts 2>/dev/null;
+ umount $BASEDIR/build/dev 2>/dev/null;
+ umount $BASEDIR/build/proc 2>/dev/null;
+ umount $BASEDIR/build/install/mnt 2>/dev/null;
+ umount $BASEDIR/build/usr/src/cache 2>/dev/null;
+ umount $BASEDIR/build/usr/src/ccache 2>/dev/null;
+ umount $BASEDIR/build/usr/src/config 2>/dev/null;
+ umount $BASEDIR/build/usr/src/doc 2>/dev/null;
+ umount $BASEDIR/build/usr/src/html 2>/dev/null;
+ umount $BASEDIR/build/usr/src/langs 2>/dev/null;
+ umount $BASEDIR/build/usr/src/lfs 2>/dev/null;
+ umount $BASEDIR/build/usr/src/log 2>/dev/null;
+ umount $BASEDIR/build/usr/src/src 2>/dev/null;
+}
+
+exiterror() {
+ stdumount
+ for i in `seq 0 7`; do
+ if ( losetup /dev/loop${i} 2>/dev/null | grep -q "/install/images" ); then
+ losetup -d /dev/loop${i} 2>/dev/null
+ fi;
+ done
+
+ if [ -n "${LOGFILE}" ]; then
+ echo # empty line
+
+ local line
+ while read -r line; do
+ echo " ${line}"
+ done <<< "$(tail -n30 ${LOGFILE})"
+ fi
+
+ echo -e "\nERROR: $*"
+ echo " Check $LOGFILE for errors if applicable"
+ exit 1
+}
+
+enterchroot() {
+ # Install QEMU helper, if needed
+ qemu_install_helper
+
+ local PATH="${TOOLS_DIR}/ccache/bin:/bin:/usr/bin:/sbin:/usr/sbin:${TOOLS_DIR}/bin"
+
+ PATH="${PATH}" chroot ${LFS} env -i \
+ HOME="/root" \
+ TERM="${TERM}" \
+ PS1="${PS1}" \
+ PATH="${PATH}" \
+ SYSTEM_RELEASE="${SYSTEM_RELEASE}" \
+ PAKFIRE_CORE="${PAKFIRE_CORE}" \
+ NAME="${NAME}" \
+ SNAME="${SNAME}" \
+ VERSION="${VERSION}" \
+ CORE="${CORE}" \
+ SLOGAN="${SLOGAN}" \
+ TOOLS_DIR="${TOOLS_DIR}" \
+ CONFIG_ROOT="${CONFIG_ROOT}" \
+ CFLAGS="${CFLAGS} ${HARDENING_CFLAGS}" \
+ CXXFLAGS="${CXXFLAGS} ${HARDENING_CFLAGS}" \
+ BUILDTARGET="${BUILDTARGET}" \
+ CROSSTARGET="${CROSSTARGET}" \
+ BUILD_ARCH="${BUILD_ARCH}" \
+ BUILD_PLATFORM="${BUILD_PLATFORM}" \
+ CCACHE_DIR=/usr/src/ccache \
+ CCACHE_COMPRESS="${CCACHE_COMPRESS}" \
+ CCACHE_COMPILERCHECK="${CCACHE_COMPILERCHECK}" \
+ KVER="${KVER}" \
+ $(fake_environ) \
+ $(qemu_environ) \
+ "$@"
+}
+
+entershell() {
+ if [ ! -e $BASEDIR/build/usr/src/lfs/ ]; then
+ exiterror "No such file or directory: $BASEDIR/build/usr/src/lfs/"
+ fi
+
+ echo "Entering to a shell inside LFS chroot, go out with exit"
+ local PS1="ipfire build chroot ($(uname -m)) \u:\w\$ "
+
+ if enterchroot bash -i; then
+ stdumount
+ else
+ beautify message FAIL
+ exiterror "chroot error"
+ fi
+}
+
+lfsmakecommoncheck() {
+ # Script present?
+ if [ ! -f $BASEDIR/lfs/$1 ]; then
+ exiterror "No such file or directory: $BASEDIR/$1"
+ fi
+
+ local PKG_VER=`get_pkg_ver $BASEDIR/lfs/$1`
+ beautify make_pkg "$PKG_VER $*"
+
+ # Check if this package is supported by our architecture.
+ # If no SUP_ARCH is found, we assume the package can be built for all.
+ if grep "^SUP_ARCH" ${BASEDIR}/lfs/${1} >/dev/null; then
+ # Check if package supports ${BUILD_ARCH} or all architectures.
+ if ! grep -E "^SUP_ARCH.*${BUILD_ARCH}|^SUP_ARCH.*all" ${BASEDIR}/lfs/${1} >/dev/null; then
+ beautify result SKIP
+ return 1
+ fi
+ fi
+
+ # Script slipped?
+ local i
+ for i in $SKIP_PACKAGE_LIST
+ do
+ if [ "$i" == "$1" ]; then
+ beautify result SKIP
+ return 1;
+ fi
+ done
+
+ echo -ne "`date -u '+%b %e %T'`: Building $* " >> $LOGFILE
+
+ cd $BASEDIR/lfs && make -s -f $* LFS_BASEDIR=$BASEDIR BUILD_ARCH="${BUILD_ARCH}" \
+ MESSAGE="$1\t " download >> $LOGFILE 2>&1
+ if [ $? -ne 0 ]; then
+ exiterror "Download error in $1"
+ fi
+
+ cd $BASEDIR/lfs && make -s -f $* LFS_BASEDIR=$BASEDIR BUILD_ARCH="${BUILD_ARCH}" \
+ MESSAGE="$1\t md5sum" md5 >> $LOGFILE 2>&1
+ if [ $? -ne 0 ]; then
+ exiterror "md5sum error in $1, check file in cache or signature"
+ fi
+
+ return 0 # pass all!
+}
+
+lfsmake1() {
+ lfsmakecommoncheck $*
+ [ $? == 1 ] && return 0
+
+ local PKG_TIME_START=`date +%s`
+
+ cd $BASEDIR/lfs && env -i \
+ PATH="${TOOLS_DIR}/ccache/bin:${TOOLS_DIR}/bin:$PATH" \
+ CCACHE_DIR="${CCACHE_DIR}" \
+ CCACHE_COMPRESS="${CCACHE_COMPRESS}" \
+ CCACHE_COMPILERCHECK="${CCACHE_COMPILERCHECK}" \
+ CFLAGS="${CFLAGS}" \
+ CXXFLAGS="${CXXFLAGS}" \
+ MAKETUNING="${MAKETUNING}" \
+ make -f $* \
+ TOOLCHAIN=1 \
+ TOOLS_DIR="${TOOLS_DIR}" \
+ CROSSTARGET="${CROSSTARGET}" \
+ BUILDTARGET="${BUILDTARGET}" \
+ BUILD_ARCH="${BUILD_ARCH}" \
+ BUILD_PLATFORM="${BUILD_PLATFORM}" \
+ LFS_BASEDIR="${BASEDIR}" \
+ ROOT="${LFS}" \
+ KVER="${KVER}" \
+ install >> $LOGFILE 2>&1
+
+ local COMPILE_SUCCESS=$?
+ local PKG_TIME_END=`date +%s`
+
+ if [ $COMPILE_SUCCESS -ne 0 ]; then
+ beautify result FAIL $[ $PKG_TIME_END - $PKG_TIME_START ]
+ exiterror "Building $*";
+ else
+ beautify result DONE $[ $PKG_TIME_END - $PKG_TIME_START ]
+ fi
+
+ return 0
+}
+
+lfsmake2() {
+ lfsmakecommoncheck $*
+ [ $? == 1 ] && return 0
+
+ local PKG_TIME_START=`date +%s`
+ local PS1='\u:\w$ '
+
+ enterchroot \
+ bash -x -c "cd /usr/src/lfs && \
+ MAKETUNING=${MAKETUNING} \
+ make -f $* \
+ LFS_BASEDIR=/usr/src install" \
+ >> ${LOGFILE} 2>&1
+
+ local COMPILE_SUCCESS=$?
+ local PKG_TIME_END=`date +%s`
+
+ if [ $COMPILE_SUCCESS -ne 0 ]; then
+ beautify result FAIL $[ $PKG_TIME_END - $PKG_TIME_START ]
+ exiterror "Building $*";
+ else
+ beautify result DONE $[ $PKG_TIME_END - $PKG_TIME_START ]
+ fi
+
+ return 0
+}
+
+ipfiredist() {
+ lfsmakecommoncheck $*
+ [ $? == 1 ] && return 0
+
+ local PKG_TIME_START=`date +%s`
+ local PS1='\u:\w$ '
+
+ enterchroot \
+ bash -x -c "cd /usr/src/lfs && make -f $* LFS_BASEDIR=/usr/src dist" \
+ >> ${LOGFILE} 2>&1
+
+ local COMPILE_SUCCESS=$?
+ local PKG_TIME_END=`date +%s`
+
+ if [ $COMPILE_SUCCESS -ne 0 ]; then
+ beautify result FAIL $[ $PKG_TIME_END - $PKG_TIME_START ]
+ exiterror "Packaging $*";
+ else
+ beautify result DONE $[ $PKG_TIME_END - $PKG_TIME_START ]
+ fi
+ return 0
+}
+
+fake_environ() {
+ [ -e "${BASEDIR}/build${TOOLS_DIR}/lib/libpakfire_preload.so" ] || return
+
+ local env="LD_PRELOAD=${TOOLS_DIR}/lib/libpakfire_preload.so"
+
+ # Fake kernel version, because some of the packages do not compile
+ # with kernel 3.0 and later.
+ env="${env} UTS_RELEASE=${KVER}"
+
+ # Fake machine version.
+ env="${env} UTS_MACHINE=${BUILD_ARCH}"
+
+ echo "${env}"
+}
+
+qemu_environ() {
+ local env
+
+ # Don't add anything if qemu is not used.
+ if ! qemu_is_required; then
+ return
+ fi
+
+ # Set default qemu options
+ case "${BUILD_ARCH}" in
+ arm*)
+ QEMU_CPU="${QEMU_CPU:-cortex-a9}"
+
+ env="${env} QEMU_CPU=${QEMU_CPU}"
+ ;;
+ esac
+
+ # Enable QEMU strace
+ #env="${env} QEMU_STRACE=1"
+
+ echo "${env}"
+}
+
+qemu_is_required() {
+ local build_arch="${1}"
+
+ if [ -z "${build_arch}" ]; then
+ build_arch="${BUILD_ARCH}"
+ fi
+
+ case "${HOST_ARCH},${build_arch}" in
+ x86_64,arm*|i?86,arm*|i?86,x86_64)
+ return 0
+ ;;
+ *)
+ return 1
+ ;;
+ esac
+}
+
+qemu_install_helper() {
+ # Do nothing, if qemu is not required
+ if ! qemu_is_required; then
+ return 0
+ fi
+
+ if [ ! -e /proc/sys/fs/binfmt_misc/status ]; then
+ exiterror "binfmt_misc not mounted. QEMU_TARGET_HELPER not useable."
+ fi
+
+ if [ ! $(cat /proc/sys/fs/binfmt_misc/status) = 'enabled' ]; then
+ exiterror "binfmt_misc not enabled. QEMU_TARGET_HELPER not useable."
+ fi
+
+
+ if [ -z "${QEMU_TARGET_HELPER}" ]; then
+ exiterror "QEMU_TARGET_HELPER not set"
+ fi
+
+ # Check if the helper is already installed.
+ if [ -x "${LFS}${QEMU_TARGET_HELPER}" ]; then
+ return 0
+ fi
+
+ # Try to find a suitable binary that we can install
+ # to the build environment.
+ local file
+ for file in "${QEMU_TARGET_HELPER}" "${QEMU_TARGET_HELPER}-static"; do
+ # file must exist and be executable.
+ [ -x "${file}" ] || continue
+
+ # Must be static.
+ file_is_static "${file}" || continue
+
+ local dirname="${LFS}$(dirname "${file}")"
+ mkdir -p "${dirname}"
+
+ install -m 755 "${file}" "${LFS}${QEMU_TARGET_HELPER}"
+ return 0
+ done
+
+ exiterror "Could not find a statically-linked QEMU emulator: ${QEMU_TARGET_HELPER}"
+}
+
+qemu_find_build_helper_name() {
+ local build_arch="${1}"
+
+ local magic
+ case "${build_arch}" in
+ arm*)
+ magic="7f454c4601010100000000000000000002002800"
+ ;;
+ x86_64)
+ magic="7f454c4602010100000000000000000002003e00"
+ ;;
+ esac
+
+ [ -z "${magic}" ] && return 1
+
+ local file
+ for file in /proc/sys/fs/binfmt_misc/*; do
+ # skip write only register entry
+ [ $(basename "${file}") = "register" ] && continue
+ # Search for the file with the correct magic value.
+ grep -qE "^magic ${magic}$" "${file}" || continue
+
+ local interpreter="$(grep "^interpreter" "${file}" | awk '{ print $2 }')"
+
+ [ -n "${interpreter}" ] || continue
+ [ "${interpreter:0:1}" = "/" ] || continue
+ [ -x "${interpreter}" ] || continue
+
+ echo "${interpreter}"
+ return 0
+ done
+
+ return 1
+}
+
+file_is_static() {
+ local file="${1}"
+
+ file ${file} 2>/dev/null | grep -q "statically linked"
+}
+
+update_language_list() {
+ local path="${1}"
+
+ local lang
+ for lang in ${path}/*.po; do
+ lang="$(basename "${lang}")"
+ echo "${lang%*.po}"
+ done | sort -u > "${path}/LINGUAS"
+}
+
# Load configuration file
if [ -f .config ]; then
. .config
fi
-# Include funtions
-. tools/make-functions
-
# Get the amount of memory in this build system
HOST_MEM=$(system_memory)
fi
prepareenv() {
- ############################################################################
- # #
- # Are we running the right shell? #
- # #
- ############################################################################
- if [ ! "$BASH" ]; then
+ ############################################################################
+ # #
+ # Are we running the right shell? #
+ # #
+ ############################################################################
+ if [ ! "$BASH" ]; then
exiterror "BASH environment variable is not set. You're probably running the wrong shell."
- fi
+ fi
- if [ -z "${BASH_VERSION}" ]; then
+ if [ -z "${BASH_VERSION}" ]; then
exiterror "Not running BASH shell."
- fi
+ fi
- ############################################################################
- # #
- # Trap on emergency exit #
- # #
- ############################################################################
- trap "exiterror 'Build process interrupted'" SIGINT SIGTERM SIGKILL SIGSTOP SIGQUIT
+ ############################################################################
+ # #
+ # Trap on emergency exit #
+ # #
+ ############################################################################
+ trap "exiterror 'Build process interrupted'" SIGINT SIGTERM SIGKILL SIGSTOP SIGQUIT
- ############################################################################
- # #
- # Resetting our nice level #
- # #
- ############################################################################
- echo -ne "Resetting our nice level to $NICE" | tee -a $LOGFILE
- renice $NICE $$ > /dev/null
- if [ `nice` != "$NICE" ]; then
+ ############################################################################
+ # #
+ # Resetting our nice level #
+ # #
+ ############################################################################
+ echo -ne "Resetting our nice level to $NICE" | tee -a $LOGFILE
+ renice $NICE $$ > /dev/null
+ if [ `nice` != "$NICE" ]; then
beautify message FAIL
exiterror "Failed to set correct nice level"
- else
+ else
beautify message DONE
- fi
+ fi
- ############################################################################
- # #
- # Checking if running as root user #
- # #
- ############################################################################
- echo -ne "Checking if we're running as root user" | tee -a $LOGFILE
- if [ `id -u` != 0 ]; then
+ ############################################################################
+ # #
+ # Checking if running as root user #
+ # #
+ ############################################################################
+ echo -ne "Checking if we're running as root user" | tee -a $LOGFILE
+ if [ `id -u` != 0 ]; then
beautify message FAIL
exiterror "Not building as root"
- else
+ else
beautify message DONE
- fi
-
-
- ############################################################################
- # #
- # Checking for necessary temporary space #
- # #
- ############################################################################
- echo -ne "Checking for necessary space on disk $BASE_DEV" | tee -a $LOGFILE
- BASE_DEV=`df -P -k $BASEDIR | tail -n 1 | awk '{ print $1 }'`
- BASE_ASPACE=`df -P -k $BASEDIR | tail -n 1 | awk '{ print $4 }'`
- if (( 2048000 > $BASE_ASPACE )); then
+ fi
+
+
+ ############################################################################
+ # #
+ # Checking for necessary temporary space #
+ # #
+ ############################################################################
+ echo -ne "Checking for necessary space on disk $BASE_DEV" | tee -a $LOGFILE
+ BASE_DEV=`df -P -k $BASEDIR | tail -n 1 | awk '{ print $1 }'`
+ BASE_ASPACE=`df -P -k $BASEDIR | tail -n 1 | awk '{ print $4 }'`
+ if (( 2048000 > $BASE_ASPACE )); then
BASE_USPACE=`du -skx $BASEDIR | awk '{print $1}'`
if (( 2048000 - $BASE_USPACE > $BASE_ASPACE )); then
beautify message FAIL
exiterror "Not enough temporary space available, need at least 2GB on $BASE_DEV"
fi
- else
+ else
beautify message DONE
- fi
-
- ############################################################################
- # #
- # Building Linux From Scratch system #
- # #
- ############################################################################
- # Set umask
- umask 022
-
- # Set LFS Directory
- LFS=$BASEDIR/build
-
- # Check ${TOOLS_DIR} symlink
- if [ -h "${TOOLS_DIR}" ]; then
- rm -f "${TOOLS_DIR}"
- fi
-
- if [ ! -e "${TOOLS_DIR}" ]; then
- ln -s "${BASEDIR}/build${TOOLS_DIR}" "${TOOLS_DIR}"
- fi
-
- if [ ! -h "${TOOLS_DIR}" ]; then
- exiterror "Could not create ${TOOLS_DIR} symbolic link"
- fi
-
- # Setup environment
- set +h
- LC_ALL=POSIX
- export LFS LC_ALL CFLAGS CXXFLAGS MAKETUNING
- unset CC CXX CPP LD_LIBRARY_PATH LD_PRELOAD
-
- # Make some extra directories
- mkdir -p "${BASEDIR}/build${TOOLS_DIR}" 2>/dev/null
- mkdir -p $BASEDIR/build/{etc,usr/src} 2>/dev/null
- mkdir -p $BASEDIR/build/{dev/{shm,pts},proc,sys}
- mkdir -p $BASEDIR/{cache,ccache} 2>/dev/null
- mkdir -p $BASEDIR/build/usr/src/{cache,config,doc,html,langs,lfs,log,src,ccache}
-
- mknod -m 600 $BASEDIR/build/dev/console c 5 1 2>/dev/null
- mknod -m 666 $BASEDIR/build/dev/null c 1 3 2>/dev/null
-
- # Make all sources and proc available under lfs build
- mount --bind /dev $BASEDIR/build/dev
- mount --bind /dev/pts $BASEDIR/build/dev/pts
- mount --bind /dev/shm $BASEDIR/build/dev/shm
- mount --bind /proc $BASEDIR/build/proc
- mount --bind /sys $BASEDIR/build/sys
- mount --bind $BASEDIR/cache $BASEDIR/build/usr/src/cache
- mount --bind $BASEDIR/ccache $BASEDIR/build/usr/src/ccache
- mount --bind $BASEDIR/config $BASEDIR/build/usr/src/config
- mount --bind $BASEDIR/doc $BASEDIR/build/usr/src/doc
- mount --bind $BASEDIR/html $BASEDIR/build/usr/src/html
- mount --bind $BASEDIR/langs $BASEDIR/build/usr/src/langs
- mount --bind $BASEDIR/lfs $BASEDIR/build/usr/src/lfs
- mount --bind $BASEDIR/log $BASEDIR/build/usr/src/log
- mount --bind $BASEDIR/src $BASEDIR/build/usr/src/src
-
- # Run LFS static binary creation scripts one by one
- export CCACHE_DIR=$BASEDIR/ccache
- export CCACHE_COMPRESS=1
- export CCACHE_COMPILERCHECK="string:toolchain-${TOOLCHAINVER} ${BUILD_ARCH}"
-
- # Remove pre-install list of installed files in case user erase some files before rebuild
- rm -f $BASEDIR/build/usr/src/lsalr 2>/dev/null
-
- # Prepare string for /etc/system-release.
- SYSTEM_RELEASE="${NAME} ${VERSION} (${BUILD_ARCH})"
- if [ "$(git status -s | wc -l)" == "0" ]; then
+ fi
+
+ ############################################################################
+ # #
+ # Building Linux From Scratch system #
+ # #
+ ############################################################################
+ # Set umask
+ umask 022
+
+ # Set LFS Directory
+ LFS=$BASEDIR/build
+
+ # Check ${TOOLS_DIR} symlink
+ if [ -h "${TOOLS_DIR}" ]; then
+ rm -f "${TOOLS_DIR}"
+ fi
+
+ if [ ! -e "${TOOLS_DIR}" ]; then
+ ln -s "${BASEDIR}/build${TOOLS_DIR}" "${TOOLS_DIR}"
+ fi
+
+ if [ ! -h "${TOOLS_DIR}" ]; then
+ exiterror "Could not create ${TOOLS_DIR} symbolic link"
+ fi
+
+ # Setup environment
+ set +h
+ LC_ALL=POSIX
+ export LFS LC_ALL CFLAGS CXXFLAGS MAKETUNING
+ unset CC CXX CPP LD_LIBRARY_PATH LD_PRELOAD
+
+ # Make some extra directories
+ mkdir -p "${BASEDIR}/build${TOOLS_DIR}" 2>/dev/null
+ mkdir -p $BASEDIR/build/{etc,usr/src} 2>/dev/null
+ mkdir -p $BASEDIR/build/{dev/{shm,pts},proc,sys}
+ mkdir -p $BASEDIR/{cache,ccache} 2>/dev/null
+ mkdir -p $BASEDIR/build/usr/src/{cache,config,doc,html,langs,lfs,log,src,ccache}
+
+ mknod -m 600 $BASEDIR/build/dev/console c 5 1 2>/dev/null
+ mknod -m 666 $BASEDIR/build/dev/null c 1 3 2>/dev/null
+
+ # Make all sources and proc available under lfs build
+ mount --bind /dev $BASEDIR/build/dev
+ mount --bind /dev/pts $BASEDIR/build/dev/pts
+ mount --bind /dev/shm $BASEDIR/build/dev/shm
+ mount --bind /proc $BASEDIR/build/proc
+ mount --bind /sys $BASEDIR/build/sys
+ mount --bind $BASEDIR/cache $BASEDIR/build/usr/src/cache
+ mount --bind $BASEDIR/ccache $BASEDIR/build/usr/src/ccache
+ mount --bind $BASEDIR/config $BASEDIR/build/usr/src/config
+ mount --bind $BASEDIR/doc $BASEDIR/build/usr/src/doc
+ mount --bind $BASEDIR/html $BASEDIR/build/usr/src/html
+ mount --bind $BASEDIR/langs $BASEDIR/build/usr/src/langs
+ mount --bind $BASEDIR/lfs $BASEDIR/build/usr/src/lfs
+ mount --bind $BASEDIR/log $BASEDIR/build/usr/src/log
+ mount --bind $BASEDIR/src $BASEDIR/build/usr/src/src
+
+ # Run LFS static binary creation scripts one by one
+ export CCACHE_DIR=$BASEDIR/ccache
+ export CCACHE_COMPRESS=1
+ export CCACHE_COMPILERCHECK="string:toolchain-${TOOLCHAINVER} ${BUILD_ARCH}"
+
+ # Remove pre-install list of installed files in case user erase some files before rebuild
+ rm -f $BASEDIR/build/usr/src/lsalr 2>/dev/null
+
+ # Prepare string for /etc/system-release.
+ SYSTEM_RELEASE="${NAME} ${VERSION} (${BUILD_ARCH})"
+ if [ "$(git status -s | wc -l)" == "0" ]; then
GIT_STATUS=""
- else
+ else
GIT_STATUS="-dirty"
- fi
- case "$GIT_BRANCH" in
+ fi
+ case "$GIT_BRANCH" in
core*|beta?|rc?)
SYSTEM_RELEASE="${SYSTEM_RELEASE} - $GIT_BRANCH$GIT_STATUS"
;;
*)
SYSTEM_RELEASE="${SYSTEM_RELEASE} - Development Build: $GIT_BRANCH/$GIT_LASTCOMMIT$GIT_STATUS"
;;
- esac
+ esac
}
buildtoolchain() {
- local error=false
- case "${BUILD_ARCH}:${HOST_ARCH}" in
- # x86_64
- x86_64:x86_64)
- # This is working.
- ;;
-
- # x86
- i586:i586|i586:i686|i586:x86_64)
- # These are working.
- ;;
- i586:*)
- error=true
- ;;
-
- # ARM
- arvm7hl:armv7hl|armv7hl:armv7l)
- # These are working.
- ;;
-
- armv5tel:armv5tel|armv5tel:armv5tejl|armv5tel:armv6l|armv5tel:armv7l|armv5tel:aarch64)
- # These are working.
- ;;
- armv5tel:*)
- error=true
- ;;
- esac
-
- ${error} && \
- exiterror "Cannot build ${BUILD_ARCH} toolchain on $(uname -m). Please use the download if any."
-
- local gcc=$(type -p gcc)
- if [ -z "${gcc}" ]; then
- exiterror "Could not find GCC. You will need a working build enviroment in order to build the toolchain."
- fi
-
- LOGFILE="$BASEDIR/log/_build.toolchain.log"
- export LOGFILE
-
- lfsmake1 stage1
- lfsmake1 ccache PASS=1
- lfsmake1 binutils PASS=1
- lfsmake1 gcc PASS=1
- lfsmake1 linux KCFG="-headers"
- lfsmake1 glibc
- lfsmake1 gcc PASS=L
- lfsmake1 binutils PASS=2
- lfsmake1 gcc PASS=2
- lfsmake1 ccache PASS=2
- lfsmake1 tcl
- lfsmake1 expect
- lfsmake1 dejagnu
- lfsmake1 pkg-config
- lfsmake1 ncurses
- lfsmake1 bash
- lfsmake1 bzip2
- lfsmake1 automake
- lfsmake1 coreutils
- lfsmake1 diffutils
- lfsmake1 findutils
- lfsmake1 gawk
- lfsmake1 gettext
- lfsmake1 grep
- lfsmake1 gzip
- lfsmake1 m4
- lfsmake1 make
- lfsmake1 patch
- lfsmake1 perl
- lfsmake1 sed
- lfsmake1 tar
- lfsmake1 texinfo
- lfsmake1 xz
- lfsmake1 fake-environ
- lfsmake1 cleanup-toolchain
+ local error=false
+ case "${BUILD_ARCH}:${HOST_ARCH}" in
+ # x86_64
+ x86_64:x86_64)
+ # This is working.
+ ;;
+
+ # x86
+ i586:i586|i586:i686|i586:x86_64)
+ # These are working.
+ ;;
+ i586:*)
+ error=true
+ ;;
+
+ # ARM
+ arvm7hl:armv7hl|armv7hl:armv7l)
+ # These are working.
+ ;;
+
+ armv5tel:armv5tel|armv5tel:armv5tejl|armv5tel:armv6l|armv5tel:armv7l|armv5tel:aarch64)
+ # These are working.
+ ;;
+ armv5tel:*)
+ error=true
+ ;;
+ esac
+
+ ${error} && \
+ exiterror "Cannot build ${BUILD_ARCH} toolchain on $(uname -m). Please use the download if any."
+
+ local gcc=$(type -p gcc)
+ if [ -z "${gcc}" ]; then
+ exiterror "Could not find GCC. You will need a working build enviroment in order to build the toolchain."
+ fi
+
+ LOGFILE="$BASEDIR/log/_build.toolchain.log"
+ export LOGFILE
+
+ lfsmake1 stage1
+ lfsmake1 ccache PASS=1
+ lfsmake1 binutils PASS=1
+ lfsmake1 gcc PASS=1
+ lfsmake1 linux KCFG="-headers"
+ lfsmake1 glibc
+ lfsmake1 gcc PASS=L
+ lfsmake1 binutils PASS=2
+ lfsmake1 gcc PASS=2
+ lfsmake1 ccache PASS=2
+ lfsmake1 tcl
+ lfsmake1 expect
+ lfsmake1 dejagnu
+ lfsmake1 pkg-config
+ lfsmake1 ncurses
+ lfsmake1 bash
+ lfsmake1 bzip2
+ lfsmake1 automake
+ lfsmake1 coreutils
+ lfsmake1 diffutils
+ lfsmake1 findutils
+ lfsmake1 gawk
+ lfsmake1 gettext
+ lfsmake1 grep
+ lfsmake1 gzip
+ lfsmake1 m4
+ lfsmake1 make
+ lfsmake1 patch
+ lfsmake1 perl
+ lfsmake1 sed
+ lfsmake1 tar
+ lfsmake1 texinfo
+ lfsmake1 xz
+ lfsmake1 fake-environ
+ lfsmake1 cleanup-toolchain
}
buildbase() {
- LOGFILE="$BASEDIR/log/_build.base.log"
- export LOGFILE
- lfsmake2 stage2
- lfsmake2 linux KCFG="-headers"
- lfsmake2 man-pages
- lfsmake2 glibc
- lfsmake2 tzdata
- lfsmake2 cleanup-toolchain
- lfsmake2 zlib
- lfsmake2 binutils
- lfsmake2 gmp
- lfsmake2 gmp-compat
- lfsmake2 mpfr
- lfsmake2 libmpc
- lfsmake2 file
- lfsmake2 gcc
- lfsmake2 sed
- lfsmake2 autoconf
- lfsmake2 automake
- lfsmake2 berkeley
- lfsmake2 coreutils
- lfsmake2 iana-etc
- lfsmake2 m4
- lfsmake2 bison
- lfsmake2 ncurses-compat
- lfsmake2 ncurses
- lfsmake2 procps
- lfsmake2 libtool
- lfsmake2 perl
- lfsmake2 readline
- lfsmake2 readline-compat
- lfsmake2 bzip2
- lfsmake2 pcre
- lfsmake2 pcre-compat
- lfsmake2 bash
- lfsmake2 diffutils
- lfsmake2 e2fsprogs
- lfsmake2 ed
- lfsmake2 findutils
- lfsmake2 flex
- lfsmake2 gawk
- lfsmake2 gettext
- lfsmake2 grep
- lfsmake2 groff
- lfsmake2 gperf
- lfsmake2 gzip
- lfsmake2 hostname
- lfsmake2 iproute2
- lfsmake2 jwhois
- lfsmake2 kbd
- lfsmake2 less
- lfsmake2 make
- lfsmake2 man
- lfsmake2 kmod
- lfsmake2 net-tools
- lfsmake2 patch
- lfsmake2 psmisc
- lfsmake2 shadow
- lfsmake2 sysklogd
- lfsmake2 sysvinit
- lfsmake2 tar
- lfsmake2 texinfo
- lfsmake2 util-linux
- lfsmake2 udev
- lfsmake2 vim
- lfsmake2 xz
- lfsmake2 paxctl
+ LOGFILE="$BASEDIR/log/_build.base.log"
+ export LOGFILE
+ lfsmake2 stage2
+ lfsmake2 linux KCFG="-headers"
+ lfsmake2 man-pages
+ lfsmake2 glibc
+ lfsmake2 tzdata
+ lfsmake2 cleanup-toolchain
+ lfsmake2 zlib
+ lfsmake2 binutils
+ lfsmake2 gmp
+ lfsmake2 gmp-compat
+ lfsmake2 mpfr
+ lfsmake2 libmpc
+ lfsmake2 file
+ lfsmake2 gcc
+ lfsmake2 sed
+ lfsmake2 autoconf
+ lfsmake2 automake
+ lfsmake2 berkeley
+ lfsmake2 coreutils
+ lfsmake2 iana-etc
+ lfsmake2 m4
+ lfsmake2 bison
+ lfsmake2 ncurses-compat
+ lfsmake2 ncurses
+ lfsmake2 procps
+ lfsmake2 libtool
+ lfsmake2 perl
+ lfsmake2 readline
+ lfsmake2 readline-compat
+ lfsmake2 bzip2
+ lfsmake2 pcre
+ lfsmake2 pcre-compat
+ lfsmake2 bash
+ lfsmake2 diffutils
+ lfsmake2 e2fsprogs
+ lfsmake2 ed
+ lfsmake2 findutils
+ lfsmake2 flex
+ lfsmake2 gawk
+ lfsmake2 gettext
+ lfsmake2 grep
+ lfsmake2 groff
+ lfsmake2 gperf
+ lfsmake2 gzip
+ lfsmake2 hostname
+ lfsmake2 iproute2
+ lfsmake2 jwhois
+ lfsmake2 kbd
+ lfsmake2 less
+ lfsmake2 make
+ lfsmake2 man
+ lfsmake2 kmod
+ lfsmake2 net-tools
+ lfsmake2 patch
+ lfsmake2 psmisc
+ lfsmake2 shadow
+ lfsmake2 sysklogd
+ lfsmake2 sysvinit
+ lfsmake2 tar
+ lfsmake2 texinfo
+ lfsmake2 util-linux
+ lfsmake2 udev
+ lfsmake2 vim
+ lfsmake2 xz
+ lfsmake2 paxctl
}
buildipfire() {
done
stdumount
for i in `seq 0 7`; do
- if ( losetup /dev/loop${i} 2>/dev/null | grep -q "/install/images" ); then
+ if ( losetup /dev/loop${i} 2>/dev/null | grep -q "/install/images" ); then
umount /dev/loop${i} 2>/dev/null;
losetup -d /dev/loop${i} 2>/dev/null;
- fi;
+ fi;
done
rm -rf $BASEDIR/build
rm -rf $BASEDIR/cdrom
exit 0
;;
lang)
- update_langs
+ echo -ne "Checking the translations for missing or obsolete strings..."
+ chmod 755 $BASEDIR/tools/{check_strings.pl,sort_strings.pl,check_langs.sh}
+ $BASEDIR/tools/sort_strings.pl en
+ $BASEDIR/tools/sort_strings.pl de
+ $BASEDIR/tools/sort_strings.pl fr
+ $BASEDIR/tools/sort_strings.pl es
+ $BASEDIR/tools/sort_strings.pl pl
+ $BASEDIR/tools/sort_strings.pl ru
+ $BASEDIR/tools/sort_strings.pl nl
+ $BASEDIR/tools/sort_strings.pl tr
+ $BASEDIR/tools/sort_strings.pl it
+ $BASEDIR/tools/check_strings.pl en > $BASEDIR/doc/language_issues.en
+ $BASEDIR/tools/check_strings.pl de > $BASEDIR/doc/language_issues.de
+ $BASEDIR/tools/check_strings.pl fr > $BASEDIR/doc/language_issues.fr
+ $BASEDIR/tools/check_strings.pl es > $BASEDIR/doc/language_issues.es
+ $BASEDIR/tools/check_strings.pl es > $BASEDIR/doc/language_issues.pl
+ $BASEDIR/tools/check_strings.pl ru > $BASEDIR/doc/language_issues.ru
+ $BASEDIR/tools/check_strings.pl nl > $BASEDIR/doc/language_issues.nl
+ $BASEDIR/tools/check_strings.pl tr > $BASEDIR/doc/language_issues.tr
+ $BASEDIR/tools/check_strings.pl it > $BASEDIR/doc/language_issues.it
+ $BASEDIR/tools/check_langs.sh > $BASEDIR/doc/language_missings
+ beautify message DONE
+
+ echo -ne "Updating language lists..."
+ update_language_list ${BASEDIR}/src/installer/po
+ update_language_list ${BASEDIR}/src/setup/po
+ beautify message DONE
;;
*)
echo "Usage: $0 {build|changelog|clean|gettoolchain|downloadsrc|shell|sync|toolchain}"
+++ /dev/null
-#!/bin/bash
-###############################################################################
-# #
-# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2016 IPFire Team <info@ipfire.org> #
-# #
-# This program is free software: you can redistribute it and/or modify #
-# it under the terms of the GNU General Public License as published by #
-# the Free Software Foundation, either version 3 of the License, or #
-# (at your option) any later version. #
-# #
-# This program is distributed in the hope that it will be useful, #
-# but WITHOUT ANY WARRANTY; without even the implied warranty of #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
-# GNU General Public License for more details. #
-# #
-# You should have received a copy of the GNU General Public License #
-# along with this program. If not, see <http://www.gnu.org/licenses/>. #
-# #
-###############################################################################
-###############################################################################
-#
-# Beautifying variables & presentation & input output interface
-#
-###############################################################################
-
-## Screen Dimentions
-# Find current screen size
-if [ -z "${COLUMNS}" ]; then
- COLUMNS=$(stty size)
- COLUMNS=${COLUMNS##* }
-fi
-
-# When using remote connections, such as a serial port, stty size returns 0
-if [ "${COLUMNS}" = "0" ]; then
- COLUMNS=80
-fi
-
-## Measurements for positioning result messages
-RESULT_WIDTH=4
-TIME_WIDTH=8
-OPT_WIDTH=6
-VER_WIDTH=10
-RESULT_COL=$((${COLUMNS} - $RESULT_WIDTH - 4))
-TIME_COL=$((${RESULT_COL} - $TIME_WIDTH - 5))
-OPT_COL=$((${TIME_COL} - $OPT_WIDTH - 5))
-VER_COL=$((${OPT_COL} - $VER_WIDTH - 5))
-
-## Set Cursur Position Commands, used via echo -e
-SET_RESULT_COL="\\033[${RESULT_COL}G"
-SET_TIME_COL="\\033[${TIME_COL}G"
-SET_OPT_COL="\\033[${OPT_COL}G"
-SET_VER_COL="\\033[${VER_COL}G"
-
-# Define color for messages
-BOLD="\\033[1;39m"
-DONE="\\033[1;32m"
-SKIP="\\033[1;34m"
-WARN="\\033[1;35m"
-FAIL="\\033[1;31m"
-NORMAL="\\033[0;39m"
-
-system_processors() {
- getconf _NPROCESSORS_ONLN 2>/dev/null || echo "1"
-}
-
-system_memory() {
- local key val unit
-
- while read -r key val unit; do
- case "${key}" in
- MemTotal:*)
- # Convert to MB
- echo "$(( ${val} / 1024 ))"
- break
- ;;
- esac
- done < /proc/meminfo
-}
-
-configure_build() {
- local build_arch="${1}"
-
- if [ "${build_arch}" = "default" ]; then
- build_arch="$(configure_build_guess)"
- fi
-
- case "${build_arch}" in
- x86_64)
- BUILDTARGET="${build_arch}-unknown-linux-gnu"
- CROSSTARGET="${build_arch}-cross-linux-gnu"
- BUILD_PLATFORM="x86"
- CFLAGS_ARCH="-m64 -mtune=generic"
- ;;
-
- i586)
- BUILDTARGET="${build_arch}-pc-linux-gnu"
- CROSSTARGET="${build_arch}-cross-linux-gnu"
- BUILD_PLATFORM="x86"
- CFLAGS_ARCH="-march=i586 -mtune=generic -fomit-frame-pointer"
- ;;
-
- aarch64)
- BUILDTARGET="${build_arch}-unknown-linux-gnu"
- CROSSTARGET="${build_arch}-cross-linux-gnu"
- BUILD_PLATFORM="arm"
- CFLAGS_ARCH=""
- ;;
-
- armv7hl)
- BUILDTARGET="${build_arch}-unknown-linux-gnueabi"
- CROSSTARGET="${build_arch}-cross-linux-gnueabi"
- BUILD_PLATFORM="arm"
- CFLAGS_ARCH="-march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard"
- ;;
-
- armv5tel)
- BUILDTARGET="${build_arch}-unknown-linux-gnueabi"
- CROSSTARGET="${build_arch}-cross-linux-gnueabi"
- BUILD_PLATFORM="arm"
- CFLAGS_ARCH="-march=armv5te -mfloat-abi=soft -fomit-frame-pointer"
- ;;
-
- *)
- exiterror "Cannot build for architure ${build_arch}"
- ;;
- esac
-
- # Check if the QEMU helper is available if needed.
- if qemu_is_required "${build_arch}"; then
- local qemu_build_helper="$(qemu_find_build_helper_name "${build_arch}")"
-
- if [ -n "${qemu_build_helper}" ]; then
- QEMU_TARGET_HELPER="${qemu_build_helper}"
- else
- exiterror "Could not find a binfmt_misc helper entry for ${build_arch}"
- fi
- fi
-
- BUILD_ARCH="${build_arch}"
- TOOLS_DIR="/tools_${BUILD_ARCH}"
-
- # Enables hardening
- HARDENING_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4"
-
- CFLAGS="-O2 -pipe -Wall -fexceptions -fPIC ${CFLAGS_ARCH}"
- CXXFLAGS="${CFLAGS}"
-
- # Determine parallelism
- if [ -z "${MAKETUNING}" ]; then
- # We assume that each process consumes about
- # 192MB of memory. Therefore we find out how
- # many processes fit into memory.
- local mem_max=$(( ${HOST_MEM} / 192 ))
-
- local processors="$(system_processors)"
- local cpu_max=$(( ${processors} * 2 ))
-
- local parallelism
- if [ ${mem_max} -lt ${cpu_max} ]; then
- parallelism=${mem_max}
- else
- parallelism=${cpu_max}
- fi
-
- MAKETUNING="-j${parallelism}"
- fi
-}
-
-configure_build_guess() {
- case "${HOST_ARCH}" in
- x86_64|i686|i586)
- echo "i586"
- ;;
-
- aarch64)
- echo "aarch64"
- ;;
-
- armv7*|armv6*|armv5*)
- echo "armv5tel"
- ;;
-
- *)
- exiterror "Cannot guess build architecture"
- ;;
- esac
-}
-
-evaluate() {
- if [ "$?" -eq "0" ]; then
- beautify message DONE
- else
- EXITCODE=$1
- shift 1
- beautify message FAIL
- $*
- if [ $EXITCODE -ne "0" ]; then
- exit $EXITCODE
- fi
- fi
-}
-
-position_cursor()
-{
- # ARG1=starting position on screen
- # ARG2=string to be printed
- # ARG3=offset, negative for left movement, positive for right movement, relative to ARG1
- # For example if your starting position is column 50 and you want to print Hello three columns to the right
- # of your starting position, your call will look like this:
- # position_cursor 50 "Hello" 3 (you'll get the string Hello at position 53 (= 50 + 3)
- # If on the other hand you want your string "Hello" to end three columns to the left of position 50,
- # your call will look like this:
- # position_cursor 50 "Hello" -3 (you'll get the string Hello at position 42 (= 50 - 5 -3)
- # If you want to start printing at the exact starting location, use offset 0
-
- START=$1
- STRING=$2
- OFFSET=$3
-
- STRING_LENGTH=${#STRING}
-
- if [ ${OFFSET} -lt 0 ]; then
- COL=$((${START} + ${OFFSET} - ${STRING_LENGTH}))
- else
- COL=$((${START} + ${OFFSET}))
- fi
-
- SET_COL="\\033[${COL}G"
-
- echo $SET_COL
-} # End of position_cursor()
-
-
-beautify()
-{
- # Commands: build_stage, make_pkg, message, result
- case "$1" in
- message)
- case "$2" in
- DONE)
- echo -ne "${SET_RESULT_COL}[${DONE} DONE ${NORMAL}]\n"
- ;;
- WARN)
- echo -ne "${WARN}${3}${NORMAL}${SET_RESULT_COL}[${WARN} WARN ${NORMAL}]\n"
- ;;
- FAIL)
- echo -ne "${SET_RESULT_COL}[${FAIL} FAIL ${NORMAL}]\n"
- ;;
- SKIP)
- echo -ne "${SET_RESULT_COL}[${SKIP} SKIP ${NORMAL}]\n"
- ;;
- esac
- ;;
- build_stage)
- MESSAGE=$2
- if [ "$STAGE_TIME_START" ]; then
- LAST_STAGE_TIME=$[ `date +%s` - $STAGE_TIME_START ]
- fi
- STAGE_TIME_START=`date +%s`
- echo -ne "${BOLD}*** (${BUILD_ARCH}) ${MESSAGE}${NORMAL}"
- if [ "$LAST_STAGE_TIME" ]; then
- echo -ne "${DONE} (Last stage took $LAST_STAGE_TIME secs)${NORMAL}\n"
- fi
- echo -ne "${BOLD}${SET_VER_COL} version${SET_OPT_COL} options${SET_TIME_COL} time (sec)${SET_RESULT_COL} status${NORMAL}\n"
- ;;
- build_start)
- BUILD_TIME_START=`date +%s`
- ;;
- build_end)
- BUILD_TIME_END=`date +%s`
- seconds=$[ $BUILD_TIME_END - $BUILD_TIME_START ]
- hours=$((seconds / 3600))
- seconds=$((seconds % 3600))
- minutes=$((seconds / 60))
- seconds=$((seconds % 60))
-
- echo -ne "${DONE}***Build is finished now and took $hours hour(s) $minutes minute(s) $seconds second(s)!${NORMAL}\n"
- ;;
- make_pkg)
- echo "$2" | while read PKG_VER PROGRAM OPTIONS
- do
- SET_VER_COL_REAL=`position_cursor $OPT_COL $PKG_VER -3`
-
- if [ "$OPTIONS" == "" ]; then
- echo -ne "${PROGRAM}${SET_VER_COL}[ ${BOLD}${SET_VER_COL_REAL}${PKG_VER}"
- echo -ne "${NORMAL} ]${SET_RESULT_COL}"
- else
- echo -ne "${PROGRAM}${SET_VER_COL}[ ${BOLD}${SET_VER_COL_REAL}${PKG_VER}"
- echo -ne "${NORMAL} ]${SET_OPT_COL}[ ${BOLD}${OPTIONS}"
- echo -ne "${NORMAL} ]${SET_RESULT_COL}"
- fi
- done
- ;;
- result)
- RESULT=$2
-
- if [ ! $3 ]; then
- PKG_TIME=0
- else
- PKG_TIME=$3
- fi
-
- SET_TIME_COL_REAL=`position_cursor $RESULT_COL $PKG_TIME -3`
- case "$RESULT" in
- DONE)
- echo -ne "${SET_TIME_COL}[ ${BOLD}${SET_TIME_COL_REAL}$PKG_TIME${NORMAL} ]"
- echo -ne "${SET_RESULT_COL}[${DONE} DONE ${NORMAL}]\n"
- ;;
- FAIL)
- echo -ne "${SET_TIME_COL}[ ${BOLD}${SET_TIME_COL_REAL}$PKG_TIME${NORMAL} ]"
- echo -ne "${SET_RESULT_COL}[${FAIL} FAIL ${NORMAL}]\n"
- ;;
- SKIP)
- echo -ne "${SET_RESULT_COL}[${SKIP} SKIP ${NORMAL}]\n"
- ;;
- esac
- ;;
- esac
-} # End of beautify()
-
-
-get_pkg_ver()
-{
- PKG_VER=`grep -E "^VER |^VER=|^VER " $1 | awk '{print $3}'`
-
- if [ -z $PKG_VER ]; then
- PKG_VER=`grep "Exp " $1 | awk '{print $4}'`
- fi
- if [ -z $PKG_VER ]; then
- PKG_VER="?"
- fi
- if [ ${#PKG_VER} -gt $VER_WIDTH ]; then
- # If a package version number is greater than $VER_WIDTH, we keep the first 4 characters
- # and replace enough characters to fit the resulting string on the screen. We'll replace
- # the extra character with .. (two dots). That's why the "+ 2" in the formula below.
- # Example: if we have a 21-long version number that we want to fit into a 10-long space,
- # we have to remove 11 characters. But if we replace 11 characters with 2 characters, we'll
- # end up with a 12-character long string. That's why we replace 12 characters with ..
- REMOVE=`expr substr "$PKG_VER" 4 $[ ${#PKG_VER} - $VER_WIDTH + 2 ]`
- PKG_VER=`echo ${PKG_VER/$REMOVE/..}`
- fi
-
- echo "$PKG_VER"
-} # End of get_pkg_ver()
-
-# Define immediately
-stdumount() {
- umount $BASEDIR/build/sys 2>/dev/null;
- umount $BASEDIR/build/dev/shm 2>/dev/null;
- umount $BASEDIR/build/dev/pts 2>/dev/null;
- umount $BASEDIR/build/dev 2>/dev/null;
- umount $BASEDIR/build/proc 2>/dev/null;
- umount $BASEDIR/build/install/mnt 2>/dev/null;
- umount $BASEDIR/build/usr/src/cache 2>/dev/null;
- umount $BASEDIR/build/usr/src/ccache 2>/dev/null;
- umount $BASEDIR/build/usr/src/config 2>/dev/null;
- umount $BASEDIR/build/usr/src/doc 2>/dev/null;
- umount $BASEDIR/build/usr/src/html 2>/dev/null;
- umount $BASEDIR/build/usr/src/langs 2>/dev/null;
- umount $BASEDIR/build/usr/src/lfs 2>/dev/null;
- umount $BASEDIR/build/usr/src/log 2>/dev/null;
- umount $BASEDIR/build/usr/src/src 2>/dev/null;
-}
-
-exiterror() {
- stdumount
- for i in `seq 0 7`; do
- if ( losetup /dev/loop${i} 2>/dev/null | grep -q "/install/images" ); then
- losetup -d /dev/loop${i} 2>/dev/null
- fi;
- done
-
- if [ -n "${LOGFILE}" ]; then
- echo # empty line
-
- local line
- while read -r line; do
- echo " ${line}"
- done <<< "$(tail -n30 ${LOGFILE})"
- fi
-
- echo -e "\nERROR: $*"
- echo " Check $LOGFILE for errors if applicable"
- exit 1
-}
-
-fake_environ() {
- [ -e "${BASEDIR}/build${TOOLS_DIR}/lib/libpakfire_preload.so" ] || return
-
- local env="LD_PRELOAD=${TOOLS_DIR}/lib/libpakfire_preload.so"
-
- # Fake kernel version, because some of the packages do not compile
- # with kernel 3.0 and later.
- env="${env} UTS_RELEASE=${KVER}"
-
- # Fake machine version.
- env="${env} UTS_MACHINE=${BUILD_ARCH}"
-
- echo "${env}"
-}
-
-qemu_environ() {
- local env
-
- # Don't add anything if qemu is not used.
- if ! qemu_is_required; then
- return
- fi
-
- # Set default qemu options
- case "${BUILD_ARCH}" in
- arm*)
- QEMU_CPU="${QEMU_CPU:-cortex-a9}"
-
- env="${env} QEMU_CPU=${QEMU_CPU}"
- ;;
- esac
-
- # Enable QEMU strace
- #env="${env} QEMU_STRACE=1"
-
- echo "${env}"
-}
-
-qemu_is_required() {
- local build_arch="${1}"
-
- if [ -z "${build_arch}" ]; then
- build_arch="${BUILD_ARCH}"
- fi
-
- case "${HOST_ARCH},${build_arch}" in
- x86_64,arm*|i?86,arm*|i?86,x86_64)
- return 0
- ;;
- *)
- return 1
- ;;
- esac
-}
-
-qemu_install_helper() {
- # Do nothing, if qemu is not required
- if ! qemu_is_required; then
- return 0
- fi
-
- if [ ! -e /proc/sys/fs/binfmt_misc/status ]; then
- exiterror "binfmt_misc not mounted. QEMU_TARGET_HELPER not useable."
- fi
-
- if [ ! $(cat /proc/sys/fs/binfmt_misc/status) = 'enabled' ]; then
- exiterror "binfmt_misc not enabled. QEMU_TARGET_HELPER not useable."
- fi
-
-
- if [ -z "${QEMU_TARGET_HELPER}" ]; then
- exiterror "QEMU_TARGET_HELPER not set"
- fi
-
- # Check if the helper is already installed.
- if [ -x "${LFS}${QEMU_TARGET_HELPER}" ]; then
- return 0
- fi
-
- # Try to find a suitable binary that we can install
- # to the build environment.
- local file
- for file in "${QEMU_TARGET_HELPER}" "${QEMU_TARGET_HELPER}-static"; do
- # file must exist and be executable.
- [ -x "${file}" ] || continue
-
- # Must be static.
- file_is_static "${file}" || continue
-
- local dirname="${LFS}$(dirname "${file}")"
- mkdir -p "${dirname}"
-
- install -m 755 "${file}" "${LFS}${QEMU_TARGET_HELPER}"
- return 0
- done
-
- exiterror "Could not find a statically-linked QEMU emulator: ${QEMU_TARGET_HELPER}"
-}
-
-qemu_find_build_helper_name() {
- local build_arch="${1}"
-
- local magic
- case "${build_arch}" in
- arm*)
- magic="7f454c4601010100000000000000000002002800"
- ;;
- x86_64)
- magic="7f454c4602010100000000000000000002003e00"
- ;;
- esac
-
- [ -z "${magic}" ] && return 1
-
- local file
- for file in /proc/sys/fs/binfmt_misc/*; do
- # skip write only register entry
- [ $(basename "${file}") = "register" ] && continue
- # Search for the file with the correct magic value.
- grep -qE "^magic ${magic}$" "${file}" || continue
-
- local interpreter="$(grep "^interpreter" "${file}" | awk '{ print $2 }')"
-
- [ -n "${interpreter}" ] || continue
- [ "${interpreter:0:1}" = "/" ] || continue
- [ -x "${interpreter}" ] || continue
-
- echo "${interpreter}"
- return 0
- done
-
- return 1
-}
-
-file_is_static() {
- local file="${1}"
-
- file ${file} 2>/dev/null | grep -q "statically linked"
-}
-
-enterchroot() {
- # Install QEMU helper, if needed
- qemu_install_helper
-
- local PATH="${TOOLS_DIR}/ccache/bin:/bin:/usr/bin:/sbin:/usr/sbin:${TOOLS_DIR}/bin"
-
- PATH="${PATH}" chroot ${LFS} env -i \
- HOME="/root" \
- TERM="${TERM}" \
- PS1="${PS1}" \
- PATH="${PATH}" \
- SYSTEM_RELEASE="${SYSTEM_RELEASE}" \
- PAKFIRE_CORE="${PAKFIRE_CORE}" \
- NAME="${NAME}" \
- SNAME="${SNAME}" \
- VERSION="${VERSION}" \
- CORE="${CORE}" \
- SLOGAN="${SLOGAN}" \
- TOOLS_DIR="${TOOLS_DIR}" \
- CONFIG_ROOT="${CONFIG_ROOT}" \
- CFLAGS="${CFLAGS} ${HARDENING_CFLAGS}" \
- CXXFLAGS="${CXXFLAGS} ${HARDENING_CFLAGS}" \
- BUILDTARGET="${BUILDTARGET}" \
- CROSSTARGET="${CROSSTARGET}" \
- BUILD_ARCH="${BUILD_ARCH}" \
- BUILD_PLATFORM="${BUILD_PLATFORM}" \
- CCACHE_DIR=/usr/src/ccache \
- CCACHE_COMPRESS="${CCACHE_COMPRESS}" \
- CCACHE_COMPILERCHECK="${CCACHE_COMPILERCHECK}" \
- KVER="${KVER}" \
- $(fake_environ) \
- $(qemu_environ) \
- "$@"
-}
-
-entershell() {
- if [ ! -e $BASEDIR/build/usr/src/lfs/ ]; then
- exiterror "No such file or directory: $BASEDIR/build/usr/src/lfs/"
- fi
-
- echo "Entering to a shell inside LFS chroot, go out with exit"
- local PS1="ipfire build chroot ($(uname -m)) \u:\w\$ "
-
- if enterchroot bash -i; then
- stdumount
- else
- beautify message FAIL
- exiterror "chroot error"
- fi
-}
-
-############################################################################
-# #
-# Necessary shell functions #
-# #
-############################################################################
-#
-# Common checking before entering the chroot and compilling
-#
-# Return:0 caller can continue
-# :1 skip (nothing to do)
-# or fail if no script file found
-#
-lfsmakecommoncheck()
-{
- # Script present?
- if [ ! -f $BASEDIR/lfs/$1 ]; then
- exiterror "No such file or directory: $BASEDIR/$1"
- fi
-
- local PKG_VER=`get_pkg_ver $BASEDIR/lfs/$1`
- beautify make_pkg "$PKG_VER $*"
-
- # Check if this package is supported by our architecture.
- # If no SUP_ARCH is found, we assume the package can be built for all.
- if grep "^SUP_ARCH" ${BASEDIR}/lfs/${1} >/dev/null; then
- # Check if package supports ${BUILD_ARCH} or all architectures.
- if ! grep -E "^SUP_ARCH.*${BUILD_ARCH}|^SUP_ARCH.*all" ${BASEDIR}/lfs/${1} >/dev/null; then
- beautify result SKIP
- return 1
- fi
- fi
-
- # Script slipped?
- local i
- for i in $SKIP_PACKAGE_LIST
- do
- if [ "$i" == "$1" ]; then
- beautify result SKIP
- return 1;
- fi
- done
-
- echo -ne "`date -u '+%b %e %T'`: Building $* " >> $LOGFILE
-
- cd $BASEDIR/lfs && make -s -f $* LFS_BASEDIR=$BASEDIR BUILD_ARCH="${BUILD_ARCH}" \
- MESSAGE="$1\t " download >> $LOGFILE 2>&1
- if [ $? -ne 0 ]; then
- exiterror "Download error in $1"
- fi
-
- cd $BASEDIR/lfs && make -s -f $* LFS_BASEDIR=$BASEDIR BUILD_ARCH="${BUILD_ARCH}" \
- MESSAGE="$1\t md5sum" md5 >> $LOGFILE 2>&1
- if [ $? -ne 0 ]; then
- exiterror "md5sum error in $1, check file in cache or signature"
- fi
-
- return 0 # pass all!
-} # End of lfsmakecommoncheck()
-
-lfsmake1() {
- lfsmakecommoncheck $*
- [ $? == 1 ] && return 0
-
- local PKG_TIME_START=`date +%s`
-
- cd $BASEDIR/lfs && env -i \
- PATH="${TOOLS_DIR}/ccache/bin:${TOOLS_DIR}/bin:$PATH" \
- CCACHE_DIR="${CCACHE_DIR}" \
- CCACHE_COMPRESS="${CCACHE_COMPRESS}" \
- CCACHE_COMPILERCHECK="${CCACHE_COMPILERCHECK}" \
- CFLAGS="${CFLAGS}" \
- CXXFLAGS="${CXXFLAGS}" \
- MAKETUNING="${MAKETUNING}" \
- make -f $* \
- TOOLCHAIN=1 \
- TOOLS_DIR="${TOOLS_DIR}" \
- CROSSTARGET="${CROSSTARGET}" \
- BUILDTARGET="${BUILDTARGET}" \
- BUILD_ARCH="${BUILD_ARCH}" \
- BUILD_PLATFORM="${BUILD_PLATFORM}" \
- LFS_BASEDIR="${BASEDIR}" \
- ROOT="${LFS}" \
- KVER="${KVER}" \
- install >> $LOGFILE 2>&1
-
- local COMPILE_SUCCESS=$?
- local PKG_TIME_END=`date +%s`
-
- if [ $COMPILE_SUCCESS -ne 0 ]; then
- beautify result FAIL $[ $PKG_TIME_END - $PKG_TIME_START ]
- exiterror "Building $*";
- else
- beautify result DONE $[ $PKG_TIME_END - $PKG_TIME_START ]
- fi
-
- return 0
-}
-
-lfsmake2() {
- lfsmakecommoncheck $*
- [ $? == 1 ] && return 0
-
- local PKG_TIME_START=`date +%s`
- local PS1='\u:\w$ '
-
- enterchroot \
- bash -x -c "cd /usr/src/lfs && \
- MAKETUNING=${MAKETUNING} \
- make -f $* \
- LFS_BASEDIR=/usr/src install" \
- >> ${LOGFILE} 2>&1
-
- local COMPILE_SUCCESS=$?
- local PKG_TIME_END=`date +%s`
-
- if [ $COMPILE_SUCCESS -ne 0 ]; then
- beautify result FAIL $[ $PKG_TIME_END - $PKG_TIME_START ]
- exiterror "Building $*";
- else
- beautify result DONE $[ $PKG_TIME_END - $PKG_TIME_START ]
- fi
-
- return 0
-}
-
-ipfiredist() {
- lfsmakecommoncheck $*
- [ $? == 1 ] && return 0
-
- local PKG_TIME_START=`date +%s`
- local PS1='\u:\w$ '
-
- enterchroot \
- bash -x -c "cd /usr/src/lfs && make -f $* LFS_BASEDIR=/usr/src dist" \
- >> ${LOGFILE} 2>&1
-
- local COMPILE_SUCCESS=$?
- local PKG_TIME_END=`date +%s`
-
- if [ $COMPILE_SUCCESS -ne 0 ]; then
- beautify result FAIL $[ $PKG_TIME_END - $PKG_TIME_START ]
- exiterror "Packaging $*";
- else
- beautify result DONE $[ $PKG_TIME_END - $PKG_TIME_START ]
- fi
- return 0
-}
-
-update_langs() {
- echo -ne "Checking the translations for missing or obsolete strings..."
- chmod 755 $BASEDIR/tools/{check_strings.pl,sort_strings.pl,check_langs.sh}
- $BASEDIR/tools/sort_strings.pl en
- $BASEDIR/tools/sort_strings.pl de
- $BASEDIR/tools/sort_strings.pl fr
- $BASEDIR/tools/sort_strings.pl es
- $BASEDIR/tools/sort_strings.pl pl
- $BASEDIR/tools/sort_strings.pl ru
- $BASEDIR/tools/sort_strings.pl nl
- $BASEDIR/tools/sort_strings.pl tr
- $BASEDIR/tools/sort_strings.pl it
- $BASEDIR/tools/check_strings.pl en > $BASEDIR/doc/language_issues.en
- $BASEDIR/tools/check_strings.pl de > $BASEDIR/doc/language_issues.de
- $BASEDIR/tools/check_strings.pl fr > $BASEDIR/doc/language_issues.fr
- $BASEDIR/tools/check_strings.pl es > $BASEDIR/doc/language_issues.es
- $BASEDIR/tools/check_strings.pl es > $BASEDIR/doc/language_issues.pl
- $BASEDIR/tools/check_strings.pl ru > $BASEDIR/doc/language_issues.ru
- $BASEDIR/tools/check_strings.pl nl > $BASEDIR/doc/language_issues.nl
- $BASEDIR/tools/check_strings.pl tr > $BASEDIR/doc/language_issues.tr
- $BASEDIR/tools/check_strings.pl it > $BASEDIR/doc/language_issues.it
- $BASEDIR/tools/check_langs.sh > $BASEDIR/doc/language_missings
- beautify message DONE
-
- echo -ne "Updating language lists..."
- update_language_list ${BASEDIR}/src/installer/po
- update_language_list ${BASEDIR}/src/setup/po
- beautify message DONE
-}
-
-update_language_list() {
- local path="${1}"
-
- local lang
- for lang in ${path}/*.po; do
- lang="$(basename "${lang}")"
- echo "${lang%*.po}"
- done | sort -u > "${path}/LINGUAS"
-}