]>
Commit | Line | Data |
---|---|---|
46414296 SW |
1 | /* |
2 | * (C) Copyright 2012,2015 Stephen Warren | |
3 | * | |
4 | * SPDX-License-Identifier: GPL-2.0 | |
5 | */ | |
6 | ||
7 | #ifndef _RPI_COMMON_H_ | |
8 | #define _RPI_COMMON_H_ | |
9 | ||
10 | #include <linux/sizes.h> | |
11 | ||
12 | /* Architecture, CPU, etc.*/ | |
13 | #define CONFIG_SYS_GENERIC_BOARD | |
14 | #define CONFIG_BCM2835 | |
15 | #define CONFIG_ARCH_CPU_INIT | |
16 | #define CONFIG_SYS_DCACHE_OFF | |
17 | /* | |
18 | * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, | |
19 | * so 2708 has historically been used rather than a dedicated 2835 ID. | |
20 | * | |
21 | * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation | |
22 | * chose to use someone else's previously registered machine ID (3139, MX51_GGC) | |
23 | * rather than obtaining a valid ID:-/ | |
24 | */ | |
25 | #ifndef CONFIG_BCM2836 | |
26 | #define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 | |
27 | #endif | |
28 | ||
29 | /* Memory layout */ | |
30 | #define CONFIG_NR_DRAM_BANKS 1 | |
31 | #define CONFIG_SYS_SDRAM_BASE 0x00000000 | |
32 | #define CONFIG_SYS_TEXT_BASE 0x00008000 | |
33 | #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE | |
34 | /* | |
35 | * The board really has 256M. However, the VC (VideoCore co-processor) shares | |
36 | * the RAM, and uses a configurable portion at the top. We tell U-Boot that a | |
37 | * smaller amount of RAM is present in order to avoid stomping on the area | |
38 | * the VC uses. | |
39 | */ | |
40 | #define CONFIG_SYS_SDRAM_SIZE SZ_128M | |
41 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ | |
42 | CONFIG_SYS_SDRAM_SIZE - \ | |
43 | GENERATED_GBL_DATA_SIZE) | |
44 | #define CONFIG_SYS_MALLOC_LEN SZ_4M | |
45 | #define CONFIG_SYS_MEMTEST_START 0x00100000 | |
46 | #define CONFIG_SYS_MEMTEST_END 0x00200000 | |
47 | #define CONFIG_LOADADDR 0x00200000 | |
48 | ||
49 | /* Flash */ | |
50 | #define CONFIG_SYS_NO_FLASH | |
51 | ||
52 | /* Devices */ | |
53 | /* GPIO */ | |
54 | #define CONFIG_BCM2835_GPIO | |
55 | /* LCD */ | |
56 | #define CONFIG_LCD | |
57 | #define CONFIG_LCD_DT_SIMPLEFB | |
58 | #define LCD_BPP LCD_COLOR16 | |
59 | /* | |
60 | * Prevent allocation of RAM for FB; the real FB address is queried | |
61 | * dynamically from the VideoCore co-processor, and comes from RAM | |
62 | * not owned by the ARM CPU. | |
63 | */ | |
64 | #define CONFIG_FB_ADDR 0 | |
65 | #define CONFIG_VIDEO_BCM2835 | |
66 | #define CONFIG_SYS_WHITE_ON_BLACK | |
67 | ||
68 | /* SD/MMC configuration */ | |
69 | #define CONFIG_GENERIC_MMC | |
70 | #define CONFIG_MMC | |
71 | #define CONFIG_SDHCI | |
72 | #define CONFIG_MMC_SDHCI_IO_ACCESSORS | |
73 | #define CONFIG_BCM2835_SDHCI | |
74 | ||
75 | #define CONFIG_CMD_USB | |
76 | #ifdef CONFIG_CMD_USB | |
77 | #define CONFIG_USB_DWC2 | |
78 | #ifdef CONFIG_BCM2836 | |
79 | #define CONFIG_USB_DWC2_REG_ADDR 0x3f980000 | |
80 | #else | |
81 | #define CONFIG_USB_DWC2_REG_ADDR 0x20980000 | |
82 | #endif | |
83 | #define CONFIG_USB_STORAGE | |
84 | #define CONFIG_USB_HOST_ETHER | |
85 | #define CONFIG_USB_ETHER_SMSC95XX | |
86 | #define CONFIG_MISC_INIT_R | |
87 | #endif | |
88 | ||
89 | /* Console UART */ | |
90 | #define CONFIG_PL01X_SERIAL | |
91 | #define CONFIG_CONS_INDEX 0 | |
92 | #define CONFIG_BAUDRATE 115200 | |
93 | ||
94 | /* Console configuration */ | |
95 | #define CONFIG_SYS_CBSIZE 1024 | |
96 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ | |
97 | sizeof(CONFIG_SYS_PROMPT) + 16) | |
98 | ||
99 | /* Environment */ | |
100 | #define CONFIG_ENV_SIZE SZ_16K | |
101 | #define CONFIG_ENV_IS_IN_FAT | |
102 | #define FAT_ENV_INTERFACE "mmc" | |
103 | #define FAT_ENV_DEVICE_AND_PART "0:1" | |
104 | #define FAT_ENV_FILE "uboot.env" | |
105 | #define CONFIG_FAT_WRITE | |
106 | #define CONFIG_ENV_VARS_UBOOT_CONFIG | |
107 | #define CONFIG_SYS_LOAD_ADDR 0x1000000 | |
108 | #define CONFIG_CONSOLE_MUX | |
109 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV | |
110 | ||
111 | /* Shell */ | |
112 | #define CONFIG_SYS_MAXARGS 8 | |
113 | #define CONFIG_SYS_PROMPT "U-Boot> " | |
114 | #define CONFIG_COMMAND_HISTORY | |
115 | ||
116 | /* Commands */ | |
117 | #include <config_cmd_default.h> | |
118 | #define CONFIG_CMD_GPIO | |
119 | #define CONFIG_CMD_MMC | |
120 | #define CONFIG_PARTITION_UUIDS | |
121 | #define CONFIG_CMD_PART | |
122 | ||
123 | /* Device tree support */ | |
124 | #define CONFIG_OF_BOARD_SETUP | |
125 | /* ATAGs support for bootm/bootz */ | |
126 | #define CONFIG_SETUP_MEMORY_TAGS | |
127 | #define CONFIG_CMDLINE_TAG | |
128 | #define CONFIG_INITRD_TAG | |
129 | ||
130 | #include <config_distro_defaults.h> | |
131 | ||
132 | /* Some things don't make sense on this HW or yet */ | |
133 | #undef CONFIG_CMD_FPGA | |
134 | ||
135 | /* Environment */ | |
136 | #define ENV_DEVICE_SETTINGS \ | |
137 | "stdin=serial,lcd\0" \ | |
138 | "stdout=serial,lcd\0" \ | |
139 | "stderr=serial,lcd\0" | |
140 | ||
141 | /* | |
142 | * Memory layout for where various images get loaded by boot scripts: | |
143 | * | |
144 | * scriptaddr can be pretty much anywhere that doesn't conflict with something | |
145 | * else. Put it low in memory to avoid conflicts. | |
146 | * | |
147 | * pxefile_addr_r can be pretty much anywhere that doesn't conflict with | |
148 | * something else. Put it low in memory to avoid conflicts. | |
149 | * | |
150 | * kernel_addr_r must be within the first 128M of RAM in order for the | |
151 | * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will | |
152 | * decompress itself to 0x8000 after the start of RAM, kernel_addr_r | |
153 | * should not overlap that area, or the kernel will have to copy itself | |
154 | * somewhere else before decompression. Similarly, the address of any other | |
155 | * data passed to the kernel shouldn't overlap the start of RAM. Pushing | |
156 | * this up to 16M allows for a sizable kernel to be decompressed below the | |
157 | * compressed load address. | |
158 | * | |
159 | * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for | |
160 | * the compressed kernel to be up to 16M too. | |
161 | * | |
162 | * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows | |
163 | * for the FDT/DTB to be up to 1M, which is hopefully plenty. | |
164 | */ | |
165 | #define ENV_MEM_LAYOUT_SETTINGS \ | |
166 | "scriptaddr=0x00000000\0" \ | |
167 | "pxefile_addr_r=0x00100000\0" \ | |
168 | "kernel_addr_r=0x01000000\0" \ | |
169 | "fdt_addr_r=0x02000000\0" \ | |
170 | "ramdisk_addr_r=0x02100000\0" \ | |
171 | ||
172 | #define BOOT_TARGET_DEVICES(func) \ | |
173 | func(MMC, mmc, 0) \ | |
174 | func(USB, usb, 0) \ | |
175 | func(PXE, pxe, na) \ | |
176 | func(DHCP, dhcp, na) | |
177 | #include <config_distro_bootcmd.h> | |
178 | ||
179 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
180 | ENV_DEVICE_SETTINGS \ | |
181 | ENV_MEM_LAYOUT_SETTINGS \ | |
182 | BOOTENV | |
183 | ||
184 | #define CONFIG_BOOTDELAY 2 | |
185 | ||
186 | #endif |