board/amcc/katmai/init.S

   1 /*
   2  * (C) Copyright 2007
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #include <ppc_asm.tmpl>
  27 #include <config.h>
  28 #include <asm-ppc/mmu.h>
  29
  30 /**************************************************************************
  31  * TLB TABLE
  32  *
  33  * This table is used by the cpu boot code to setup the initial tlb
  34  * entries. Rather than make broad assumptions in the cpu source tree,
  35  * this table lets each board set things up however they like.
  36  *
  37  *  Pointer to the table is returned in r1
  38  *
  39  *************************************************************************/
  40
  41         .section .bootpg,"ax"
  42
  43 /**************************************************************************
  44  * TLB table for revA
  45  *************************************************************************/
  46         .globl tlbtabA
  47 tlbtabA:
  48         tlbtab_start
  49
  50         /*
  51          * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
  52          * speed up boot process. It is patched after relocation to enable SA_I
  53          */
  54         tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
  55
  56         /*
  57          * TLB entries for SDRAM are not needed on this platform.
  58          * They are dynamically generated in the SPD DDR(2) detection
  59          * routine.
  60          */
  61
  62         tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
  63         tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
  64
  65         tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
  66         tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
  67         tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
  68         tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
  69
  70         tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
  71         tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
  72         tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
  73         tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
  74         tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
  75         tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
  76         tlbtab_end
  77
  78 /**************************************************************************
  79  * TLB table for revB
  80  *
  81  * Notice: revB of the 440SPe chip is very strict about PLB real addresses
  82  * and ranges to be mapped for config space: it seems to only work with
  83  * d_nnnn_nnnn range (hangs the core upon config transaction attempts when
  84  * set otherwise) while revA uses c_nnnn_nnnn.
  85  *************************************************************************/
  86         .globl tlbtabB
  87 tlbtabB:
  88         tlbtab_start
  89
  90         /*
  91          * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
  92          * speed up boot process. It is patched after relocation to enable SA_I
  93          */
  94         tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
  95
  96         /*
  97          * TLB entries for SDRAM are not needed on this platform.
  98          * They are dynamically generated in the SPD DDR(2) detection
  99          * routine.
 100          */
 101
 102         tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
 103
 104         tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
 105
 106         tlbentry(CONFIG_SYS_ACE_BASE, SZ_1K, CONFIG_SYS_ACE_BASE, 4,AC_R|AC_W|SA_G|SA_I)
 107
 108         tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 109         tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 110         tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 111
 112         tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 113         tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 114         tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 115         tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 116         tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 117         tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 118         tlbtab_end