]> git.ipfire.org Git - people/ms/u-boot.git/blob - board/atmel/atngw100/atngw100.c
Merge branch 'fixes' into cleanups
[people/ms/u-boot.git] / board / atmel / atngw100 / atngw100.c
1 /*
2 * Copyright (C) 2006 Atmel Corporation
3 *
4 * See file CREDITS for list of people who contributed to this
5 * project.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22 #include <common.h>
23
24 #include <asm/io.h>
25 #include <asm/sdram.h>
26 #include <asm/arch/clk.h>
27 #include <asm/arch/gpio.h>
28 #include <asm/arch/hmatrix.h>
29 #include <asm/arch/portmux.h>
30 #include <netdev.h>
31
32 DECLARE_GLOBAL_DATA_PTR;
33
34 static const struct sdram_config sdram_config = {
35 .data_bits = SDRAM_DATA_16BIT,
36 .row_bits = 13,
37 .col_bits = 9,
38 .bank_bits = 2,
39 .cas = 3,
40 .twr = 2,
41 .trc = 7,
42 .trp = 2,
43 .trcd = 2,
44 .tras = 5,
45 .txsr = 5,
46 /* 7.81 us */
47 .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
48 };
49
50 int board_early_init_f(void)
51 {
52 /* Enable SDRAM in the EBI mux */
53 hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
54
55 portmux_enable_ebi(16, 23, 0, PORTMUX_DRIVE_HIGH);
56 portmux_enable_usart1(PORTMUX_DRIVE_MIN);
57
58 #if defined(CONFIG_MACB)
59 portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
60 portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
61 #endif
62 #if defined(CONFIG_MMC)
63 portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
64 #endif
65 #if defined(CONFIG_ATMEL_SPI)
66 portmux_enable_spi0(1 << 0, PORTMUX_DRIVE_LOW);
67 #endif
68
69 return 0;
70 }
71
72 phys_size_t initdram(int board_type)
73 {
74 unsigned long expected_size;
75 unsigned long actual_size;
76 void *sdram_base;
77
78 sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
79
80 expected_size = sdram_init(sdram_base, &sdram_config);
81 actual_size = get_ram_size(sdram_base, expected_size);
82
83 unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
84
85 if (expected_size != actual_size)
86 printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
87 actual_size >> 20, expected_size >> 20);
88
89 return actual_size;
90 }
91
92 int board_early_init_r(void)
93 {
94 gd->bd->bi_phy_id[0] = 0x01;
95 gd->bd->bi_phy_id[1] = 0x03;
96 return 0;
97 }
98
99 #ifdef CONFIG_CMD_NET
100 int board_eth_init(bd_t *bi)
101 {
102 macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
103 macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);
104 return 0;
105 }
106 #endif
107
108 /* SPI chip select control */
109 #ifdef CONFIG_ATMEL_SPI
110 #include <spi.h>
111
112 #define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA(3)
113
114 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
115 {
116 return bus == 0 && cs == 0;
117 }
118
119 void spi_cs_activate(struct spi_slave *slave)
120 {
121 gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 0);
122 }
123
124 void spi_cs_deactivate(struct spi_slave *slave)
125 {
126 gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 1);
127 }
128 #endif /* CONFIG_ATMEL_SPI */