board/freescale/mx25pdk/mx25pdk.c

   1 /*
   2  * (C) Copyright 2011 Freescale Semiconductor, Inc.
   3  *
   4  * Author: Fabio Estevam <fabio.estevam@freescale.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <asm/io.h>
  11 #include <asm/gpio.h>
  12 #include <asm/arch/imx-regs.h>
  13 #include <asm/arch/iomux-mx25.h>
  14 #include <asm/arch/clock.h>
  15 #include <mmc.h>
  16 #include <fsl_esdhc.h>
  17 #include <i2c.h>
  18 #include <power/pmic.h>
  19 #include <fsl_pmic.h>
  20 #include <mc34704.h>
  21
  22 #define FEC_RESET_B             IMX_GPIO_NR(4, 8)
  23 #define FEC_ENABLE_B            IMX_GPIO_NR(2, 3)
  24 #define CARD_DETECT             IMX_GPIO_NR(2, 1)
  25
  26 DECLARE_GLOBAL_DATA_PTR;
  27
  28 #ifdef CONFIG_FSL_ESDHC
  29 struct fsl_esdhc_cfg esdhc_cfg[1] = {
  30         {IMX_MMC_SDHC1_BASE},
  31 };
  32 #endif
  33
  34 /*
  35  * FIXME: need to revisit this
  36  * The original code enabled PUE and 100-k pull-down without PKE, so the right
  37  * value here is likely:
  38  *      0 for no pull
  39  * or:
  40  *      PAD_CTL_PUS_100K_DOWN for 100-k pull-down
  41  */
  42 #define FEC_OUT_PAD_CTRL        0
  43
  44 #define I2C_PAD_CTRL            (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
  45                                  PAD_CTL_ODE)
  46
  47 static void mx25pdk_fec_init(void)
  48 {
  49         static const iomux_v3_cfg_t fec_pads[] = {
  50                 MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
  51                 MX25_PAD_FEC_RX_DV__FEC_RX_DV,
  52                 MX25_PAD_FEC_RDATA0__FEC_RDATA0,
  53                 NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL),
  54                 NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL),
  55                 NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL),
  56                 MX25_PAD_FEC_MDIO__FEC_MDIO,
  57                 MX25_PAD_FEC_RDATA1__FEC_RDATA1,
  58                 NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL),
  59
  60                 NEW_PAD_CTRL(MX25_PAD_D12__GPIO_4_8, 0), /* FEC_RESET_B */
  61                 NEW_PAD_CTRL(MX25_PAD_A17__GPIO_2_3, 0), /* FEC_ENABLE_B */
  62         };
  63
  64         static const iomux_v3_cfg_t i2c_pads[] = {
  65                 NEW_PAD_CTRL(MX25_PAD_I2C1_CLK__I2C1_CLK, I2C_PAD_CTRL),
  66                 NEW_PAD_CTRL(MX25_PAD_I2C1_DAT__I2C1_DAT, I2C_PAD_CTRL),
  67         };
  68
  69         imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
  70
  71         /* Assert RESET and ENABLE low */
  72         gpio_direction_output(FEC_RESET_B, 0);
  73         gpio_direction_output(FEC_ENABLE_B, 0);
  74
  75         udelay(10);
  76
  77         /* Deassert RESET and ENABLE */
  78         gpio_set_value(FEC_RESET_B, 1);
  79         gpio_set_value(FEC_ENABLE_B, 1);
  80
  81         /* Setup I2C pins so that PMIC can turn on PHY supply */
  82         imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
  83 }
  84
  85 int dram_init(void)
  86 {
  87         /* dram_init must store complete ramsize in gd->ram_size */
  88         gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
  89                                 PHYS_SDRAM_1_SIZE);
  90         return 0;
  91 }
  92
  93 /*
  94  * Set up input pins with hysteresis and 100-k pull-ups
  95  */
  96 #define UART1_IN_PAD_CTRL       (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP)
  97 /*
  98  * FIXME: need to revisit this
  99  * The original code enabled PUE and 100-k pull-down without PKE, so the right
 100  * value here is likely:
 101  *      0 for no pull
 102  * or:
 103  *      PAD_CTL_PUS_100K_DOWN for 100-k pull-down
 104  */
 105 #define UART1_OUT_PAD_CTRL      0
 106
 107 static void mx25pdk_uart1_init(void)
 108 {
 109         static const iomux_v3_cfg_t uart1_pads[] = {
 110                 NEW_PAD_CTRL(MX25_PAD_UART1_RXD__UART1_RXD, UART1_IN_PAD_CTRL),
 111                 NEW_PAD_CTRL(MX25_PAD_UART1_TXD__UART1_TXD, UART1_OUT_PAD_CTRL),
 112                 NEW_PAD_CTRL(MX25_PAD_UART1_RTS__UART1_RTS, UART1_OUT_PAD_CTRL),
 113                 NEW_PAD_CTRL(MX25_PAD_UART1_CTS__UART1_CTS, UART1_IN_PAD_CTRL),
 114         };
 115
 116         imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
 117 }
 118
 119 int board_early_init_f(void)
 120 {
 121         mx25pdk_uart1_init();
 122
 123         return 0;
 124 }
 125
 126 int board_init(void)
 127 {
 128         /* address of boot parameters */
 129         gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 130
 131         return 0;
 132 }
 133
 134 int board_late_init(void)
 135 {
 136         struct pmic *p;
 137         int ret;
 138
 139         mx25pdk_fec_init();
 140
 141         ret = pmic_init(I2C_PMIC);
 142         if (ret)
 143                 return ret;
 144
 145         p = pmic_get("FSL_PMIC");
 146         if (!p)
 147                 return -ENODEV;
 148
 149         /* Turn on Ethernet PHY supply */
 150         pmic_reg_write(p, MC34704_GENERAL2_REG, ONOFFE);
 151
 152         return 0;
 153 }
 154
 155 #ifdef CONFIG_FSL_ESDHC
 156 int board_mmc_getcd(struct mmc *mmc)
 157 {
 158         /* Set up the Card Detect pin. */
 159         imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX25_PAD_A15__GPIO_2_1, 0));
 160
 161         gpio_direction_input(CARD_DETECT);
 162         return !gpio_get_value(CARD_DETECT);
 163 }
 164
 165 int board_mmc_init(bd_t *bis)
 166 {
 167         static const iomux_v3_cfg_t sdhc1_pads[] = {
 168                 NEW_PAD_CTRL(MX25_PAD_SD1_CMD__SD1_CMD, NO_PAD_CTRL),
 169                 NEW_PAD_CTRL(MX25_PAD_SD1_CLK__SD1_CLK, NO_PAD_CTRL),
 170                 NEW_PAD_CTRL(MX25_PAD_SD1_DATA0__SD1_DATA0, NO_PAD_CTRL),
 171                 NEW_PAD_CTRL(MX25_PAD_SD1_DATA1__SD1_DATA1, NO_PAD_CTRL),
 172                 NEW_PAD_CTRL(MX25_PAD_SD1_DATA2__SD1_DATA2, NO_PAD_CTRL),
 173                 NEW_PAD_CTRL(MX25_PAD_SD1_DATA3__SD1_DATA3, NO_PAD_CTRL),
 174         };
 175
 176         imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
 177
 178         esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
 179         return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
 180 }
 181 #endif
 182
 183 int checkboard(void)
 184 {
 185         puts("Board: MX25PDK\n");
 186
 187         return 0;
 188 }