board/kup/kup4x/kup4x.c

   1 /*
   2  * (C) Copyright 2000-2004
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 #include <common.h>
  26 #include <mpc8xx.h>
  27 #include <post.h>
  28 #include "../common/kup.h"
  29 #ifdef CONFIG_KUP4K_LOGO
  30 /* #include "s1d13706.h" */
  31 #endif
  32
  33 #define KUP4X_USB
  34
  35
  36 typedef struct {
  37         volatile unsigned char *VmemAddr;
  38         volatile unsigned char *RegAddr;
  39 } FB_INFO_S1D13xxx;
  40
  41 /* ------------------------------------------------------------------------- */
  42
  43 int usb_init_kup4x (void);
  44
  45
  46 #ifdef CONFIG_KUP4K_LOGO
  47 void lcd_logo (bd_t * bd);
  48 #endif
  49
  50 /* ------------------------------------------------------------------------- */
  51
  52 #define _NOT_USED_      0xFFFFFFFF
  53
  54 const uint sdram_table[] = {
  55         /*
  56          * Single Read. (Offset 0 in UPMA RAM)
  57          */
  58         0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
  59         0x1FF77C47,             /* last */
  60
  61         /*
  62          * SDRAM Initialization (offset 5 in UPMA RAM)
  63          *
  64          * This is no UPM entry point. The following definition uses
  65          * the remaining space to establish an initialization
  66          * sequence, which is executed by a RUN command.
  67          *
  68          */
  69         0x1FF77C35, 0xEFEABC34, 0x1FB57C35,     /* last */
  70
  71         /*
  72          * Burst Read. (Offset 8 in UPMA RAM)
  73          */
  74         0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
  75         0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
  76         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
  77         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
  78
  79         /*
  80          * Single Write. (Offset 18 in UPMA RAM)
  81          */
  82         0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
  83         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
  84
  85         /*
  86          * Burst Write. (Offset 20 in UPMA RAM)
  87          */
  88         0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
  89         0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47,     /* last */
  90         _NOT_USED_,
  91         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
  92         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
  93
  94         /*
  95          * Refresh  (Offset 30 in UPMA RAM)
  96          */
  97         0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
  98         0xFFFFFC84, 0xFFFFFC07, /* last */
  99         _NOT_USED_, _NOT_USED_,
 100         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 101
 102         /*
 103          * Exception. (Offset 3c in UPMA RAM)
 104          */
 105         0x7FFFFC07,             /* last */
 106         _NOT_USED_, _NOT_USED_, _NOT_USED_,
 107 };
 108
 109 /* ------------------------------------------------------------------------- */
 110
 111 /*
 112  * Check Board Identity:
 113  */
 114
 115 int checkboard (void)
 116 {
 117         volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 118         volatile memctl8xx_t *memctl = &immap->im_memctl;
 119         volatile uchar *latch;
 120         uchar rev, mod;
 121
 122         /*
 123          * Init ChipSelect #4 (CAN + HW-Latch)
 124          */
 125         memctl->memc_or4 = 0xFFFF8926;
 126         memctl->memc_br4 = 0x90000401;
 127         __asm__ ("eieio");
 128         latch = (volatile uchar *) 0x90000200;
 129         rev = (*latch & 0xF8) >> 3;
 130         mod = (*latch & 0x03);
 131         printf ("Board: KUP4X Rev %d.%d\n",rev,mod);
 132         return (0);
 133 }
 134
 135 /* ------------------------------------------------------------------------- */
 136
 137 phys_size_t initdram (int board_type)
 138 {
 139         volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 140         volatile memctl8xx_t *memctl = &immap->im_memctl;
 141         long int size_b0 = 0;
 142         long int size_b1 = 0;
 143         long int size_b2 = 0;
 144         long int size_b3 = 0;
 145
 146         upmconfig (UPMA, (uint *) sdram_table,
 147                    sizeof (sdram_table) / sizeof (uint));
 148         /*
 149          * Preliminary prescaler for refresh (depends on number of
 150          * banks): This value is selected for four cycles every 62.4 us
 151          * with two SDRAM banks or four cycles every 31.2 us with one
 152          * bank. It will be adjusted after memory sizing.
 153          */
 154         memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 155
 156         memctl->memc_mar = 0x00000088;
 157
 158         /*
 159          * Map controller banks 1 and 2 to the SDRAM banks 2 and 3 at
 160          * preliminary addresses - these have to be modified after the
 161          * SDRAM size has been determined.
 162          */
 163 /*      memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;       */
 164 /*      memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;       */
 165
 166 /*      memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;       */
 167 /*      memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;       */
 168
 169         memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE));   /* no refresh yet */
 170
 171         udelay (200);
 172
 173         /* perform SDRAM initializsation sequence */
 174
 175         memctl->memc_mcr = 0x80002105;  /* SDRAM bank 0 */
 176         udelay (1);
 177         memctl->memc_mcr = 0x80002830;  /* SDRAM bank 0 - execute twice */
 178         udelay (1);
 179         memctl->memc_mcr = 0x80002106;  /* SDRAM bank 0 - RUN MRS Pattern from loc 6 */
 180         udelay (1);
 181
 182         memctl->memc_mcr = 0x80004105;  /* SDRAM bank 1 */
 183         udelay (1);
 184         memctl->memc_mcr = 0x80004830;  /* SDRAM bank 1 - execute twice */
 185         udelay (1);
 186         memctl->memc_mcr = 0x80004106;  /* SDRAM bank 1 - RUN MRS Pattern from loc 6 */
 187         udelay (1);
 188
 189         memctl->memc_mcr = 0x80006105;  /* SDRAM bank 2 */
 190         udelay (1);
 191         memctl->memc_mcr = 0x80006830;  /* SDRAM bank 2 - execute twice */
 192         udelay (1);
 193         memctl->memc_mcr = 0x80006106;  /* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
 194         udelay (1);
 195
 196         memctl->memc_mcr = 0x8000C105;  /* SDRAM bank 2 */
 197         udelay (1);
 198         memctl->memc_mcr = 0x8000C830;  /* SDRAM bank 2 - execute twice */
 199         udelay (1);
 200         memctl->memc_mcr = 0x8000C106;  /* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
 201         udelay (1);
 202
 203         memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
 204         udelay (1000);
 205 #if 0                           /* 4 x 8MB */
 206         size_b0 = 0x00800000;
 207         size_b1 = 0x00800000;
 208         size_b2 = 0x00800000;
 209         size_b3 = 0x00800000;
 210         memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 211         udelay (1000);
 212         memctl->memc_or1 = 0xFF800A00;
 213         memctl->memc_br1 = 0x00000081;
 214         memctl->memc_or2 = 0xFF000A00;
 215         memctl->memc_br2 = 0x00800081;
 216         memctl->memc_or3 = 0xFE000A00;
 217         memctl->memc_br3 = 0x01000081;
 218         memctl->memc_or6 = 0xFE000A00;
 219         memctl->memc_br6 = 0x01800081;
 220 #else  /* 4 x 16 MB */
 221         size_b0 = 0x01000000;
 222         size_b1 = 0x01000000;
 223         size_b2 = 0x01000000;
 224         size_b3 = 0x01000000;
 225         memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 226         udelay (1000);
 227         memctl->memc_or1 = 0xFF000A00;
 228         memctl->memc_br1 = 0x00000081;
 229         memctl->memc_or2 = 0xFE000A00;
 230         memctl->memc_br2 = 0x01000081;
 231         memctl->memc_or3 = 0xFD000A00;
 232         memctl->memc_br3 = 0x02000081;
 233         memctl->memc_or6 = 0xFC000A00;
 234         memctl->memc_br6 = 0x03000081;
 235 #endif
 236         udelay (10000);
 237
 238         return (size_b0 + size_b1 + size_b2 + size_b3);
 239 }
 240
 241 /* ------------------------------------------------------------------------- */
 242
 243 /*
 244  * Check memory range for valid RAM. A simple memory test determines
 245  * the actually available RAM size between addresses `base' and
 246  * `base + maxsize'. Some (not all) hardware errors are detected:
 247  * - short between address lines
 248  * - short between data lines
 249  */
 250 #if 0
 251 static long int dram_size (long int mamr_value, long int *base,
 252                            long int maxsize)
 253 {
 254         volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 255         volatile memctl8xx_t *memctl = &immap->im_memctl;
 256         volatile long int *addr;
 257         ulong cnt, val;
 258         ulong save[32];         /* to make test non-destructive */
 259         unsigned char i = 0;
 260
 261         memctl->memc_mamr = mamr_value;
 262
 263         for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
 264                 addr = base + cnt;      /* pointer arith! */
 265
 266                 save[i++] = *addr;
 267                 *addr = ~cnt;
 268         }
 269
 270         /* write 0 to base address */
 271         addr = base;
 272         save[i] = *addr;
 273         *addr = 0;
 274
 275         /* check at base address */
 276         if ((val = *addr) != 0) {
 277                 *addr = save[i];
 278                 return (0);
 279         }
 280
 281         for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
 282                 addr = base + cnt;      /* pointer arith! */
 283
 284                 val = *addr;
 285                 *addr = save[--i];
 286
 287                 if (val != (~cnt)) {
 288                         return (cnt * sizeof (long));
 289                 }
 290         }
 291         return (maxsize);
 292 }
 293 #endif
 294
 295 int misc_init_r (void)
 296 {
 297         volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 298
 299 #ifdef CONFIG_IDE_LED
 300         /* Configure PA8 as output port */
 301         immap->im_ioport.iop_padir |= 0x80;
 302         immap->im_ioport.iop_paodr |= 0x80;
 303         immap->im_ioport.iop_papar &= ~0x80;
 304         immap->im_ioport.iop_padat |= 0x80;     /* turn it off */
 305 #endif
 306 #ifdef KUP4X_USB
 307         usb_init_kup4x ();
 308 #endif
 309         setenv ("hw", "4x");
 310         poweron_key ();
 311         return (0);
 312 }