]> git.ipfire.org Git - people/ms/u-boot.git/blob - board/mx1fs2/lowlevel_init.S
rename CFG_ macros to CONFIG_SYS
[people/ms/u-boot.git] / board / mx1fs2 / lowlevel_init.S
1 /*
2 * Copyright (C) 2004 Sascha Hauer, Pengutronix
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version 2
7 * of the License, or (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
17 * 02111-1307, USA.
18 *
19 */
20
21 #include <config.h>
22 #include <version.h>
23 #include <asm/arch/imx-regs.h>
24
25 .globl lowlevel_init
26 lowlevel_init:
27
28 mov r10, lr
29
30 /* Change PERCLK1DIV to 14 ie 14+1 */
31 ldr r0, =PCDR
32 ldr r1, =CONFIG_SYS_PCDR_VAL
33 str r1, [r0]
34
35 /* set MCU PLL Control Register 0 */
36
37 ldr r0, =MPCTL0
38 ldr r1, =CONFIG_SYS_MPCTL0_VAL
39 str r1, [r0]
40
41 /* set MCU PLL Control Register 1 */
42
43 ldr r0, =MPCTL1
44 ldr r1, =CONFIG_SYS_MPCTL1_VAL
45 str r1, [r0]
46
47 /* set mpll restart bit */
48 ldr r0, =CSCR
49 ldr r1, [r0]
50 orr r1,r1,#(1<<21)
51 str r1, [r0]
52
53 mov r2,#0x10
54 1:
55 mov r3,#0x2000
56 2:
57 subs r3,r3,#1
58 bne 2b
59
60 subs r2,r2,#1
61 bne 1b
62
63 /* set System PLL Control Register 0 */
64
65 ldr r0, =SPCTL0
66 ldr r1, =CONFIG_SYS_SPCTL0_VAL
67 str r1, [r0]
68
69 /* set System PLL Control Register 1 */
70
71 ldr r0, =SPCTL1
72 ldr r1, =CONFIG_SYS_SPCTL1_VAL
73 str r1, [r0]
74
75 /* set spll restart bit */
76 ldr r0, =CSCR
77 ldr r1, [r0]
78 orr r1,r1,#(1<<22)
79 str r1, [r0]
80
81 mov r2,#0x10
82 1:
83 mov r3,#0x2000
84 2:
85 subs r3,r3,#1
86 bne 2b
87
88 subs r2,r2,#1
89 bne 1b
90
91 ldr r0, =CSCR
92 ldr r1, =CONFIG_SYS_CSCR_VAL
93 str r1, [r0]
94
95 ldr r0, =GPCR
96 ldr r1, =CONFIG_SYS_GPCR_VAL
97 str r1, [r0]
98
99 /*
100 * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
101 * this.....
102 *
103 * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
104 * register 1, this stops it using the output of the PLL and thus runs at the
105 * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
106 * use the value set in the CM_OSC registers...regardless of what you set it
107 * too! Thus, although i thought i was running at 140MHz, i'm actually running
108 * at 40!..
109 *
110 * Slapping this into my bootloader does the trick...
111 *
112 * MRC p15,0,r0,c1,c0,0 ; read core configuration register
113 * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode
114 * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration
115 * register
116 *
117 */
118 MRC p15,0,r0,c1,c0,0
119 /* ORR r0,r0,#0xC0000000 async mode */
120 /* ORR r0,r0,#0x40000000 sync mode */
121 ORR r0,r0,#0xC0000000
122 MCR p15,0,r0,c1,c0,0
123
124 ldr r0, =GIUS(0)
125 ldr r1, =CONFIG_SYS_GIUS_A_VAL
126 str r1, [r0]
127
128 ldr r0, =FMCR
129 ldr r1, =CONFIG_SYS_FMCR_VAL
130 str r1, [r0]
131
132 ldr r0, =CS0U
133 ldr r1, =CONFIG_SYS_CS0U_VAL
134 str r1, [r0]
135
136 ldr r0, =CS0L
137 ldr r1, =CONFIG_SYS_CS0L_VAL
138 str r1, [r0]
139
140 ldr r0, =CS1U
141 ldr r1, =CONFIG_SYS_CS1U_VAL
142 str r1, [r0]
143
144 ldr r0, =CS1L
145 ldr r1, =CONFIG_SYS_CS1L_VAL
146 str r1, [r0]
147
148 ldr r0, =CS4U
149 ldr r1, =CONFIG_SYS_CS4U_VAL
150 str r1, [r0]
151
152 ldr r0, =CS4L
153 ldr r1, =CONFIG_SYS_CS4L_VAL
154 str r1, [r0]
155
156 ldr r0, =CS5U
157 ldr r1, =CONFIG_SYS_CS5U_VAL
158 str r1, [r0]
159
160 ldr r0, =CS5L
161 ldr r1, =CONFIG_SYS_CS5L_VAL
162 str r1, [r0]
163
164 /* SDRAM Setup */
165
166 ldr r1,=0x00221000 /* adr of SDCTRL0 */
167 ldr r0,=0x92120200
168 str r0,[r1,#0] /* put in precharge command mode */
169 ldr r2,=0x08200000 /* adr for precharge cmd */
170 ldr r0,[r2,#0] /* precharge */
171 ldr r0,=0xA2120200
172 ldr r2,=0x08000000 /* start of SDRAM */
173 str r0,[r1,#0] /* put in auto-refresh mode */
174 ldr r0,[r2,#0] /* auto-refresh */
175 ldr r0,[r2,#0] /* auto-refresh */
176 ldr r0,[r2,#0] /* auto-refresh */
177 ldr r0,[r2,#0] /* auto-refresh */
178 ldr r0,[r2,#0] /* auto-refresh */
179 ldr r0,[r2,#0] /* auto-refresh */
180 ldr r0,[r2,#0] /* auto-refresh */
181 ldr r0,=0xB2120200
182 ldr r2,=0x08111800
183 str r0,[r1,#0] /* setup for mode register of SDRAM */
184 ldr r0,[r2,#0] /* program mode register */
185 ldr r0,=0x82124267
186 str r0,[r1,#0] /* back to normal operation */
187
188 mov pc,r10