board/samsung/goni/lowlevel_init.S

   1 /*
   2  * Memory Setup stuff - taken from blob memsetup.S
   3  *
   4  * Copyright (C) 2009 Samsung Electronics
   5  * Kyungmin Park <kyungmin.park@samsung.com>
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #include <config.h>
  27 #include <version.h>
  28 #include <asm/arch/cpu.h>
  29 #include <asm/arch/clock.h>
  30 #include <asm/arch/power.h>
  31
  32 /*
  33  * Register usages:
  34  *
  35  * r5 has zero always
  36  * r7 has S5PC100 GPIO base, 0xE0300000
  37  * r8 has real GPIO base, 0xE0300000, 0xE0200000 at S5PC100, S5PC110 repectively
  38  * r9 has Mobile DDR size, 1 means 1GiB, 2 means 2GiB and so on
  39  */
  40
  41 _TEXT_BASE:
  42         .word   CONFIG_SYS_TEXT_BASE
  43
  44         .globl lowlevel_init
  45 lowlevel_init:
  46         mov     r11, lr
  47
  48         /* r5 has always zero */
  49         mov     r5, #0
  50
  51         ldr     r7, =S5PC100_GPIO_BASE
  52         ldr     r8, =S5PC100_GPIO_BASE
  53         /* Read CPU ID */
  54         ldr     r2, =S5PC110_PRO_ID
  55         ldr     r0, [r2]
  56         mov     r1, #0x00010000
  57         and     r0, r0, r1
  58         cmp     r0, r5
  59         beq     100f
  60         ldr     r8, =S5PC110_GPIO_BASE
  61 100:
  62         /* Turn on KEY_LED_ON [GPJ4(1)] XMSMWEN */
  63         cmp     r7, r8
  64         beq     skip_check_didle                        @ Support C110 only
  65
  66         ldr     r0, =S5PC110_RST_STAT
  67         ldr     r1, [r0]
  68         and     r1, r1, #0x000D0000
  69         cmp     r1, #(0x1 << 19)                        @ DEEPIDLE_WAKEUP
  70         beq     didle_wakeup
  71         cmp     r7, r8
  72
  73 skip_check_didle:
  74         addeq   r0, r8, #0x280                          @ S5PC100_GPIO_J4
  75         addne   r0, r8, #0x2C0                          @ S5PC110_GPIO_J4
  76         ldr     r1, [r0, #0x0]                          @ GPIO_CON_OFFSET
  77         bic     r1, r1, #(0xf << 4)                     @ 1 * 4-bit
  78         orr     r1, r1, #(0x1 << 4)
  79         str     r1, [r0, #0x0]                          @ GPIO_CON_OFFSET
  80
  81         ldr     r1, [r0, #0x4]                          @ GPIO_DAT_OFFSET
  82         bic     r1, r1, #(1 << 1)
  83         str     r1, [r0, #0x4]                          @ GPIO_DAT_OFFSET
  84
  85         /* Don't setup at s5pc100 */
  86         beq     100f
  87
  88         /*
  89          * Initialize Async Register Setting for EVT1
  90          * Because we are setting EVT1 as the default value of EVT0,
  91          * setting EVT0 as well does not make things worse.
  92          * Thus, for the simplicity, we set for EVT0, too
  93          *
  94          * The "Async Registers" are:
  95          *      0xE0F0_0000
  96          *      0xE1F0_0000
  97          *      0xF180_0000
  98          *      0xF190_0000
  99          *      0xF1A0_0000
 100          *      0xF1B0_0000
 101          *      0xF1C0_0000
 102          *      0xF1D0_0000
 103          *      0xF1E0_0000
 104          *      0xF1F0_0000
 105          *      0xFAF0_0000
 106          */
 107         ldr     r0, =0xe0f00000
 108         ldr     r1, [r0]
 109         bic     r1, r1, #0x1
 110         str     r1, [r0]
 111
 112         ldr     r0, =0xe1f00000
 113         ldr     r1, [r0]
 114         bic     r1, r1, #0x1
 115         str     r1, [r0]
 116
 117         ldr     r0, =0xf1800000
 118         ldr     r1, [r0]
 119         bic     r1, r1, #0x1
 120         str     r1, [r0]
 121
 122         ldr     r0, =0xf1900000
 123         ldr     r1, [r0]
 124         bic     r1, r1, #0x1
 125         str     r1, [r0]
 126
 127         ldr     r0, =0xf1a00000
 128         ldr     r1, [r0]
 129         bic     r1, r1, #0x1
 130         str     r1, [r0]
 131
 132         ldr     r0, =0xf1b00000
 133         ldr     r1, [r0]
 134         bic     r1, r1, #0x1
 135         str     r1, [r0]
 136
 137         ldr     r0, =0xf1c00000
 138         ldr     r1, [r0]
 139         bic     r1, r1, #0x1
 140         str     r1, [r0]
 141
 142         ldr     r0, =0xf1d00000
 143         ldr     r1, [r0]
 144         bic     r1, r1, #0x1
 145         str     r1, [r0]
 146
 147         ldr     r0, =0xf1e00000
 148         ldr     r1, [r0]
 149         bic     r1, r1, #0x1
 150         str     r1, [r0]
 151
 152         ldr     r0, =0xf1f00000
 153         ldr     r1, [r0]
 154         bic     r1, r1, #0x1
 155         str     r1, [r0]
 156
 157         ldr     r0, =0xfaf00000
 158         ldr     r1, [r0]
 159         bic     r1, r1, #0x1
 160         str     r1, [r0]
 161
 162         /*
 163          * Diable ABB block to reduce sleep current at low temperature
 164          * Note that it's hidden register setup don't modify it
 165          */
 166         ldr     r0, =0xE010C300
 167         ldr     r1, =0x00800000
 168         str     r1, [r0]
 169
 170 100:
 171         /* IO retension release */
 172         ldreq   r0, =S5PC100_OTHERS                     @ 0xE0108200
 173         ldrne   r0, =S5PC110_OTHERS                     @ 0xE010E000
 174         ldr     r1, [r0]
 175         ldreq   r2, =(1 << 31)                          @ IO_RET_REL
 176         ldrne   r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28))
 177         orr     r1, r1, r2
 178         /* Do not release retention here for S5PC110 */
 179         streq   r1, [r0]
 180
 181         /* Disable Watchdog */
 182         ldreq   r0, =S5PC100_WATCHDOG_BASE              @ 0xEA200000
 183         ldrne   r0, =S5PC110_WATCHDOG_BASE              @ 0xE2700000
 184         str     r5, [r0]
 185
 186         /* setting SRAM */
 187         ldreq   r0, =S5PC100_SROMC_BASE
 188         ldrne   r0, =S5PC110_SROMC_BASE
 189         ldr     r1, =0x9
 190         str     r1, [r0]
 191
 192         /* S5PC100 has 3 groups of interrupt sources */
 193         ldreq   r0, =S5PC100_VIC0_BASE                  @ 0xE4000000
 194         ldrne   r0, =S5PC110_VIC0_BASE                  @ 0xF2000000
 195         add     r1, r0, #0x00100000
 196         add     r2, r0, #0x00200000
 197
 198         /* Disable all interrupts (VIC0, VIC1 and VIC2) */
 199         mvn     r3, #0x0
 200         str     r3, [r0, #0x14]                         @ INTENCLEAR
 201         str     r3, [r1, #0x14]                         @ INTENCLEAR
 202         str     r3, [r2, #0x14]                         @ INTENCLEAR
 203
 204         /* Set all interrupts as IRQ */
 205         str     r5, [r0, #0xc]                          @ INTSELECT
 206         str     r5, [r1, #0xc]                          @ INTSELECT
 207         str     r5, [r2, #0xc]                          @ INTSELECT
 208
 209         /* Pending Interrupt Clear */
 210         str     r5, [r0, #0xf00]                        @ INTADDRESS
 211         str     r5, [r1, #0xf00]                        @ INTADDRESS
 212         str     r5, [r2, #0xf00]                        @ INTADDRESS
 213
 214         /* for UART */
 215         bl      uart_asm_init
 216
 217         bl      internal_ram_init
 218
 219         cmp     r7, r8
 220         /* Clear wakeup status register */
 221         ldreq   r0, =S5PC100_WAKEUP_STAT
 222         ldrne   r0, =S5PC110_WAKEUP_STAT
 223         ldr     r1, [r0]
 224         str     r1, [r0]
 225
 226         /* IO retension release */
 227         ldreq   r0, =S5PC100_OTHERS                     @ 0xE0108200
 228         ldrne   r0, =S5PC110_OTHERS                     @ 0xE010E000
 229         ldr     r1, [r0]
 230         ldreq   r2, =(1 << 31)                          @ IO_RET_REL
 231         ldrne   r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28))
 232         orr     r1, r1, r2
 233         str     r1, [r0]
 234
 235         b       1f
 236
 237 didle_wakeup:
 238         /* Wait when APLL is locked */
 239         ldr     r0, =0xE0100100                 @ S5PC110_APLL_CON
 240 lockloop:
 241         ldr     r1, [r0]
 242         and     r1, r1, #(1 << 29)
 243         cmp     r1, #(1 << 29)
 244         bne     lockloop
 245
 246         ldr     r0, =S5PC110_INFORM0
 247         ldr     r1, [r0]
 248         mov     pc, r1
 249         nop
 250         nop
 251         nop
 252         nop
 253         nop
 254
 255 1:
 256         mov     lr, r11
 257         mov     pc, lr
 258
 259 /*
 260  * system_clock_init: Initialize core clock and bus clock.
 261  * void system_clock_init(void)
 262  */
 263 system_clock_init:
 264         ldr     r0, =S5PC110_CLOCK_BASE         @ 0xE0100000
 265
 266         /* Check S5PC100 */
 267         cmp     r7, r8
 268         bne     110f
 269 100:
 270         /* Set Lock Time */
 271         ldr     r1, =0xe10                      @ Locktime : 0xe10 = 3600
 272         str     r1, [r0, #0x000]                @ S5PC100_APLL_LOCK
 273         str     r1, [r0, #0x004]                @ S5PC100_MPLL_LOCK
 274         str     r1, [r0, #0x008]                @ S5PC100_EPLL_LOCK
 275         str     r1, [r0, #0x00C]                @ S5PC100_HPLL_LOCK
 276
 277         /* S5P_APLL_CON */
 278         ldr     r1, =0x81bc0400         @ SDIV 0, PDIV 4, MDIV 444 (1333MHz)
 279         str     r1, [r0, #0x100]
 280         /* S5P_MPLL_CON */
 281         ldr     r1, =0x80590201         @ SDIV 1, PDIV 2, MDIV 89 (267MHz)
 282         str     r1, [r0, #0x104]
 283         /* S5P_EPLL_CON */
 284         ldr     r1, =0x80870303         @ SDIV 3, PDIV 3, MDIV 135 (67.5MHz)
 285         str     r1, [r0, #0x108]
 286         /* S5P_HPLL_CON */
 287         ldr     r1, =0x80600603         @ SDIV 3, PDIV 6, MDIV 96
 288         str     r1, [r0, #0x10C]
 289
 290         ldr     r1, [r0, #0x300]
 291         ldr     r2, =0x00003fff
 292         bic     r1, r1, r2
 293         ldr     r2, =0x00011301
 294
 295         orr     r1, r1, r2
 296         str     r1, [r0, #0x300]
 297         ldr     r1, [r0, #0x304]
 298         ldr     r2, =0x00011110
 299         orr     r1, r1, r2
 300         str     r1, [r0, #0x304]
 301         ldr     r1, =0x00000001
 302         str     r1, [r0, #0x308]
 303
 304         /* Set Source Clock */
 305         ldr     r1, =0x00001111                 @ A, M, E, HPLL Muxing
 306         str     r1, [r0, #0x200]                @ S5PC1XX_CLK_SRC0
 307
 308         b       200f
 309 110:
 310         ldr     r0, =0xE010C000                 @ S5PC110_PWR_CFG
 311
 312         /* Set OSC_FREQ value */
 313         ldr     r1, =0xf
 314         str     r1, [r0, #0x100]                @ S5PC110_OSC_FREQ
 315
 316         /* Set MTC_STABLE value */
 317         ldr     r1, =0xffffffff
 318         str     r1, [r0, #0x110]                @ S5PC110_MTC_STABLE
 319
 320         /* Set CLAMP_STABLE value */
 321         ldr     r1, =0x3ff03ff
 322         str     r1, [r0, #0x114]                @ S5PC110_CLAMP_STABLE
 323
 324         ldr     r0, =S5PC110_CLOCK_BASE         @ 0xE0100000
 325
 326         /* Set Clock divider */
 327         ldr     r1, =0x14131330                 @ 1:1:4:4, 1:4:5
 328         str     r1, [r0, #0x300]
 329         ldr     r1, =0x11110111                 @ UART[3210]: MMC[3210]
 330         str     r1, [r0, #0x310]
 331
 332         /* Set Lock Time */
 333         ldr     r1, =0x2cf                      @ Locktime : 30us
 334         str     r1, [r0, #0x000]                @ S5PC110_APLL_LOCK
 335         ldr     r1, =0xe10                      @ Locktime : 0xe10 = 3600
 336         str     r1, [r0, #0x008]                @ S5PC110_MPLL_LOCK
 337         str     r1, [r0, #0x010]                @ S5PC110_EPLL_LOCK
 338         str     r1, [r0, #0x020]                @ S5PC110_VPLL_LOCK
 339
 340         /* S5PC110_APLL_CON */
 341         ldr     r1, =0x80C80601                 @ 800MHz
 342         str     r1, [r0, #0x100]
 343         /* S5PC110_MPLL_CON */
 344         ldr     r1, =0x829B0C01                 @ 667MHz
 345         str     r1, [r0, #0x108]
 346         /* S5PC110_EPLL_CON */
 347         ldr     r1, =0x80600602                 @  96MHz VSEL 0 P 6 M 96 S 2
 348         str     r1, [r0, #0x110]
 349         /* S5PC110_VPLL_CON */
 350         ldr     r1, =0x806C0603                 @  54MHz
 351         str     r1, [r0, #0x120]
 352
 353         /* Set Source Clock */
 354         ldr     r1, =0x10001111                 @ A, M, E, VPLL Muxing
 355         str     r1, [r0, #0x200]                @ S5PC1XX_CLK_SRC0
 356
 357         /* OneDRAM(DMC0) clock setting */
 358         ldr     r1, =0x01000000                 @ ONEDRAM_SEL[25:24] 1 SCLKMPLL
 359         str     r1, [r0, #0x218]                @ S5PC110_CLK_SRC6
 360         ldr     r1, =0x30000000                 @ ONEDRAM_RATIO[31:28] 3 + 1
 361         str     r1, [r0, #0x318]                @ S5PC110_CLK_DIV6
 362
 363         /* XCLKOUT = XUSBXTI 24MHz */
 364         add     r2, r0, #0xE000                 @ S5PC110_OTHERS
 365         ldr     r1, [r2]
 366         orr     r1, r1, #(0x3 << 8)             @ CLKOUT[9:8] 3 XUSBXTI
 367         str     r1, [r2]
 368
 369         /* CLK_IP0 */
 370         ldr     r1, =0x8fefeeb                  @ DMC[1:0] PDMA0[3] IMEM[5]
 371         str     r1, [r0, #0x460]                @ S5PC110_CLK_IP0
 372
 373         /* CLK_IP1 */
 374         ldr     r1, =0xe9fdf0f9                 @ FIMD[0] USBOTG[16]
 375                                                 @ NANDXL[24]
 376         str     r1, [r0, #0x464]                @ S5PC110_CLK_IP1
 377
 378         /* CLK_IP2 */
 379         ldr     r1, =0xf75f7fc                  @ CORESIGHT[8] MODEM[9]
 380                                                 @ HOSTIF[10] HSMMC0[16]
 381                                                 @ HSMMC2[18] VIC[27:24]
 382         str     r1, [r0, #0x468]                @ S5PC110_CLK_IP2
 383
 384         /* CLK_IP3 */
 385         ldr     r1, =0x8eff038c                 @ I2C[8:6]
 386                                                 @ SYSTIMER[16] UART0[17]
 387                                                 @ UART1[18] UART2[19]
 388                                                 @ UART3[20] WDT[22]
 389                                                 @ PWM[23] GPIO[26] SYSCON[27]
 390         str     r1, [r0, #0x46c]                @ S5PC110_CLK_IP3
 391
 392         /* CLK_IP4 */
 393         ldr     r1, =0xfffffff1                 @ CHIP_ID[0] TZPC[8:5]
 394         str     r1, [r0, #0x470]                @ S5PC110_CLK_IP3
 395
 396 200:
 397         /* wait at least 200us to stablize all clock */
 398         mov     r2, #0x10000
 399 1:      subs    r2, r2, #1
 400         bne     1b
 401
 402         mov     pc, lr
 403
 404 internal_ram_init:
 405         ldreq   r0, =0xE3800000
 406         ldrne   r0, =0xF1500000
 407         ldr     r1, =0x0
 408         str     r1, [r0]
 409
 410         mov     pc, lr
 411
 412 /*
 413  * uart_asm_init: Initialize UART's pins
 414  */
 415 uart_asm_init:
 416         /* set GPIO to enable UART0-UART4 */
 417         mov     r0, r8
 418         ldr     r1, =0x22222222
 419         str     r1, [r0, #0x0]                  @ S5PC100_GPIO_A0_OFFSET
 420         ldr     r1, =0x00002222
 421         str     r1, [r0, #0x20]                 @ S5PC100_GPIO_A1_OFFSET
 422
 423         /* Check S5PC100 */
 424         cmp     r7, r8
 425         bne     110f
 426
 427         /* UART_SEL GPK0[5] at S5PC100 */
 428         add     r0, r8, #0x2A0                  @ S5PC100_GPIO_K0_OFFSET
 429         ldr     r1, [r0, #0x0]                  @ S5PC1XX_GPIO_CON_OFFSET
 430         bic     r1, r1, #(0xf << 20)            @ 20 = 5 * 4-bit
 431         orr     r1, r1, #(0x1 << 20)            @ Output
 432         str     r1, [r0, #0x0]                  @ S5PC1XX_GPIO_CON_OFFSET
 433
 434         ldr     r1, [r0, #0x8]                  @ S5PC1XX_GPIO_PULL_OFFSET
 435         bic     r1, r1, #(0x3 << 10)            @ 10 = 5 * 2-bit
 436         orr     r1, r1, #(0x2 << 10)            @ Pull-up enabled
 437         str     r1, [r0, #0x8]                  @ S5PC1XX_GPIO_PULL_OFFSET
 438
 439         ldr     r1, [r0, #0x4]                  @ S5PC1XX_GPIO_DAT_OFFSET
 440         orr     r1, r1, #(1 << 5)               @ 5 = 5 * 1-bit
 441         str     r1, [r0, #0x4]                  @ S5PC1XX_GPIO_DAT_OFFSET
 442
 443         b       200f
 444 110:
 445         /*
 446          * Note that the following address
 447          * 0xE020'0360 is reserved address at S5PC100
 448          */
 449         /* UART_SEL MP0_5[7] at S5PC110 */
 450         add     r0, r8, #0x360                  @ S5PC110_GPIO_MP0_5_OFFSET
 451         ldr     r1, [r0, #0x0]                  @ S5PC1XX_GPIO_CON_OFFSET
 452         bic     r1, r1, #(0xf << 28)            @ 28 = 7 * 4-bit
 453         orr     r1, r1, #(0x1 << 28)            @ Output
 454         str     r1, [r0, #0x0]                  @ S5PC1XX_GPIO_CON_OFFSET
 455
 456         ldr     r1, [r0, #0x8]                  @ S5PC1XX_GPIO_PULL_OFFSET
 457         bic     r1, r1, #(0x3 << 14)            @ 14 = 7 * 2-bit
 458         orr     r1, r1, #(0x2 << 14)            @ Pull-up enabled
 459         str     r1, [r0, #0x8]                  @ S5PC1XX_GPIO_PULL_OFFSET
 460
 461         ldr     r1, [r0, #0x4]                  @ S5PC1XX_GPIO_DAT_OFFSET
 462         orr     r1, r1, #(1 << 7)               @ 7 = 7 * 1-bit
 463         str     r1, [r0, #0x4]                  @ S5PC1XX_GPIO_DAT_OFFSET
 464 200:
 465         mov     pc, lr