include/configs/3c120_devboard.h

   1 /*
   2  * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
   3  * Scott McNutt <smcnutt@psyent.com>
   4  * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /*
  13  * BOARD/CPU
  14  */
  15 #define CONFIG_DISPLAY_CPUINFO
  16 #define CONFIG_DISPLAY_BOARDINFO_LATE
  17
  18 /*
  19  * SERIAL
  20  */
  21 #define CONFIG_BAUDRATE                 115200
  22 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* Suppress console info */
  23
  24 /*
  25  * CFI Flash
  26  */
  27 #define CONFIG_FLASH_CFI_DRIVER
  28 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
  29 #define CONFIG_SYS_FLASH_CFI
  30 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  31 #define CONFIG_SYS_FLASH_PROTECTION
  32 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT       1
  33 #define CONFIG_SYS_MAX_FLASH_SECT       512
  34
  35 /*
  36  * NET options
  37  */
  38 #define CONFIG_SYS_RX_ETH_BUFFER        0
  39 #define CONFIG_CMD_MII
  40 #define CONFIG_PHY_GIGE
  41 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  42 #define CONFIG_PHY_MARVELL
  43
  44 /*
  45  * BOOTP options
  46  */
  47 #define CONFIG_BOOTP_BOOTFILESIZE
  48 #define CONFIG_BOOTP_BOOTPATH
  49 #define CONFIG_BOOTP_GATEWAY
  50 #define CONFIG_BOOTP_HOSTNAME
  51
  52 /*
  53  * FDT options
  54  */
  55 #define CONFIG_OF_LIBFDT
  56 #define CONFIG_OF_BOARD_SETUP
  57 #define CONFIG_LMB
  58
  59 /*
  60  * MEMORY ORGANIZATION
  61  * -Monitor at top of sdram.
  62  * -The heap is placed below the monitor
  63  * -The stack is placed below the heap (&grows down).
  64  */
  65 #define CONFIG_SYS_SDRAM_BASE           0xD0000000
  66 #define CONFIG_SYS_SDRAM_SIZE           0x08000000
  67 #define CONFIG_NR_DRAM_BANKS            1
  68 #define CONFIG_MONITOR_IS_IN_RAM
  69 #define CONFIG_SYS_MONITOR_LEN          0x80000 /* Reserve 512k */
  70 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
  71                                          CONFIG_SYS_SDRAM_SIZE - \
  72                                          CONFIG_SYS_MONITOR_LEN)
  73 #define CONFIG_SYS_MALLOC_LEN           0x20000
  74
  75 /*
  76  * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
  77  * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
  78  * reset address, no? This will keep the environment in user region
  79  * of flash. NOTE: the monitor length must be multiple of sector size
  80  * (which is common practice).
  81  */
  82 #define CONFIG_ENV_IS_IN_FLASH
  83
  84 #define CONFIG_ENV_SIZE                 0x20000 /* 128k, 1 sector */
  85 #define CONFIG_ENV_OVERWRITE            /* Serial change Ok     */
  86 #define CONFIG_ENV_ADDR                 (0xe2800000 + CONFIG_SYS_MONITOR_LEN)
  87
  88 /*
  89  * MISC
  90  */
  91 #define CONFIG_SYS_LONGHELP             /* Provide extended help */
  92 #define CONFIG_SYS_CBSIZE               256     /* Console I/O buf size */
  93 #define CONFIG_SYS_MAXARGS              16      /* Max command args     */
  94 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Bootarg buf size */
  95 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
  96                                         sizeof(CONFIG_SYS_PROMPT) + \
  97                                          16)    /* Print buf size */
  98 #define CONFIG_SYS_LOAD_ADDR            0xd4000000      /* Half of RAM */
  99 #define CONFIG_LOADADDR                 CONFIG_SYS_LOAD_ADDR
 100 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 101 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MONITOR_BASE - \
 102                                          CONFIG_ENV_SIZE - \
 103                                          CONFIG_SYS_MALLOC_LEN -        \
 104                                          0x10000)
 105 #define CONFIG_VERSION_VARIABLE
 106 #define CONFIG_AUTO_COMPLETE
 107 #define CONFIG_CMDLINE_EDITING
 108
 109 #endif /* __CONFIG_H */