include/configs/M54418TWR.h

   1 /*
   2  * Configuation settings for the Freescale MCF54418 TWR board.
   3  *
   4  * Copyright 2010-2012 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M54418TWR_H
  15 #define _M54418TWR_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_M54418TWR        /* M54418TWR board */
  22
  23 #define CONFIG_MCFUART
  24 #define CONFIG_SYS_UART_PORT            (0)
  25 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600 , 19200 , 38400 , 57600, 115200 }
  26
  27 #undef CONFIG_WATCHDOG
  28
  29 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  30
  31 /*
  32  * BOOTP options
  33  */
  34 #define CONFIG_BOOTP_BOOTFILESIZE
  35 #define CONFIG_BOOTP_BOOTPATH
  36 #define CONFIG_BOOTP_GATEWAY
  37 #define CONFIG_BOOTP_HOSTNAME
  38
  39 /*
  40  * NAND FLASH
  41  */
  42 #ifdef CONFIG_CMD_NAND
  43 #define CONFIG_JFFS2_NAND
  44 #define CONFIG_NAND_FSL_NFC
  45 #define CONFIG_SYS_NAND_BASE            0xFC0FC000
  46 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  47 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
  48 #define CONFIG_SYS_NAND_SELECT_DEVICE
  49 #endif
  50
  51 /* Network configuration */
  52 #define CONFIG_MCFFEC
  53 #ifdef CONFIG_MCFFEC
  54 #define CONFIG_MII                      1
  55 #define CONFIG_MII_INIT         1
  56 #define CONFIG_SYS_DISCOVER_PHY
  57 #define CONFIG_SYS_RX_ETH_BUFFER        2
  58 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  59 #define CONFIG_SYS_TX_ETH_BUFFER        2
  60 #define CONFIG_HAS_ETH1
  61
  62 #define CONFIG_SYS_FEC0_PINMUX          0
  63 #define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
  64 #define CONFIG_SYS_FEC1_PINMUX          0
  65 #define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_MIIBASE
  66 #define MCFFEC_TOUT_LOOP                50000
  67 #define CONFIG_SYS_FEC0_PHYADDR 0
  68 #define CONFIG_SYS_FEC1_PHYADDR 1
  69
  70
  71 #ifdef  CONFIG_SYS_NAND_BOOT
  72 #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \
  73                                 "mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \
  74                                 "-(jffs2) console=ttyS0,115200"
  75 #else
  76 #define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot="     \
  77                                 __stringify(CONFIG_SERVERIP) ":/tftpboot/" \
  78                                 __stringify(CONFIG_IPADDR) "  ip="      \
  79                                 __stringify(CONFIG_IPADDR) ":"  \
  80                                 __stringify(CONFIG_SERVERIP)":" \
  81                                 __stringify(CONFIG_GATEWAYIP)": "       \
  82                                 __stringify(CONFIG_NETMASK)             \
  83                                 "::eth0:off:rw console=ttyS0,115200"
  84 #endif
  85
  86 #define CONFIG_ETHPRIME "FEC0"
  87 #define CONFIG_IPADDR           192.168.1.2
  88 #define CONFIG_NETMASK          255.255.255.0
  89 #define CONFIG_SERVERIP 192.168.1.1
  90 #define CONFIG_GATEWAYIP        192.168.1.1
  91
  92 #define CONFIG_SYS_FEC_BUF_USE_SRAM
  93 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  94 #ifndef CONFIG_SYS_DISCOVER_PHY
  95 #define FECDUPLEX       FULL
  96 #define FECSPEED        _100BASET
  97 #define LINKSTATUS      1
  98 #else
  99 #define LINKSTATUS      0
 100 #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 101 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 102 #endif
 103 #endif                  /* CONFIG_SYS_DISCOVER_PHY */
 104 #endif
 105
 106 #define CONFIG_HOSTNAME         M54418TWR
 107
 108 #if defined(CONFIG_CF_SBF)
 109 /* ST Micro serial flash */
 110 #define CONFIG_SYS_LOAD_ADDR2           0x40010007
 111 #define CONFIG_EXTRA_ENV_SETTINGS               \
 112         "netdev=eth0\0"                         \
 113         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 114         "loadaddr=0x40010000\0"                 \
 115         "sbfhdr=sbfhdr.bin\0"                   \
 116         "uboot=u-boot.bin\0"                    \
 117         "load=tftp ${loadaddr} ${sbfhdr};"      \
 118         "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"       \
 119         "upd=run load; run prog\0"              \
 120         "prog=sf probe 0:1 1000000 3;"          \
 121         "sf erase 0 40000;"                     \
 122         "sf write ${loadaddr} 0 40000;"         \
 123         "save\0"                                \
 124         ""
 125 #elif defined(CONFIG_SYS_NAND_BOOT)
 126 #define CONFIG_EXTRA_ENV_SETTINGS               \
 127         "netdev=eth0\0"                         \
 128         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 129         "loadaddr=0x40010000\0"                 \
 130         "u-boot=u-boot.bin\0"                   \
 131         "load=tftp ${loadaddr} ${u-boot};\0"    \
 132         "upd=run load; run prog\0"              \
 133         "prog=nand device 0;"                   \
 134         "nand erase 0 40000;"                   \
 135         "nb_update ${loadaddr} ${filesize};"    \
 136         "save\0"                                \
 137         ""
 138 #else
 139 #define CONFIG_SYS_UBOOT_END    0x3FFFF
 140 #define CONFIG_EXTRA_ENV_SETTINGS               \
 141         "netdev=eth0\0"                         \
 142         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 143         "loadaddr=40010000\0"                   \
 144         "u-boot=u-boot.bin\0"                   \
 145         "load=tftp ${loadaddr) ${u-boot}\0"     \
 146         "upd=run load; run prog\0"              \
 147         "prog=prot off mram" " ;"       \
 148         "cp.b ${loadaddr} 0 ${filesize};"       \
 149         "save\0"                                \
 150         ""
 151 #endif
 152
 153 /* Realtime clock */
 154 #undef CONFIG_MCFRTC
 155 #define CONFIG_RTC_MCFRRTC
 156 #define CONFIG_SYS_MCFRRTC_BASE         0xFC0A8000
 157
 158 /* Timer */
 159 #define CONFIG_MCFTMR
 160 #undef CONFIG_MCFPIT
 161
 162 /* I2c */
 163 #undef CONFIG_SYS_FSL_I2C
 164 #undef  CONFIG_SYS_I2C_SOFT     /* I2C bit-banged */
 165 /* I2C speed and slave address  */
 166 #define CONFIG_SYS_I2C_SPEED            80000
 167 #define CONFIG_SYS_I2C_SLAVE            0x7F
 168 #define CONFIG_SYS_I2C_OFFSET           0x58000
 169 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
 170
 171 /* DSPI and Serial Flash */
 172 #define CONFIG_CF_SPI
 173 #define CONFIG_CF_DSPI
 174 #define CONFIG_SERIAL_FLASH
 175 #define CONFIG_HARD_SPI
 176 #define CONFIG_SYS_SBFHDR_SIZE          0x7
 177 #ifdef CONFIG_CMD_SPI
 178
 179 #       define CONFIG_SYS_DSPI_CTAR0    (DSPI_CTAR_TRSZ(7) | \
 180                                          DSPI_CTAR_PCSSCK_1CLK | \
 181                                          DSPI_CTAR_PASC(0) | \
 182                                          DSPI_CTAR_PDT(0) | \
 183                                          DSPI_CTAR_CSSCK(0) | \
 184                                          DSPI_CTAR_ASC(0) | \
 185                                          DSPI_CTAR_DT(1))
 186 #       define CONFIG_SYS_DSPI_CTAR1    (CONFIG_SYS_DSPI_CTAR0)
 187 #       define CONFIG_SYS_DSPI_CTAR2    (CONFIG_SYS_DSPI_CTAR0)
 188 #endif
 189
 190 /* Input, PCI, Flexbus, and VCO */
 191 #define CONFIG_EXTRA_CLOCK
 192
 193 #define CONFIG_PRAM                     2048    /* 2048 KB */
 194
 195 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 196
 197 #if defined(CONFIG_CMD_KGDB)
 198 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 199 #else
 200 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 201 #endif
 202 /* Print Buffer Size */
 203 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 204                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 205 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 206 /* Boot Argument Buffer Size    */
 207 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 208
 209 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x10000)
 210
 211 #define CONFIG_SYS_MBAR         0xFC000000
 212
 213 /*
 214  * Low Level Configuration Settings
 215  * (address mappings, register initial values, etc.)
 216  * You should know what you are doing if you make changes here.
 217  */
 218
 219 /*-----------------------------------------------------------------------
 220  * Definitions for initial stack pointer and data area (in DPRAM)
 221  */
 222 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 223 /* End of used area in internal SRAM */
 224 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
 225 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 226 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - \
 227                                         GENERATED_GBL_DATA_SIZE) - 32)
 228 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 229 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 230
 231 /*-----------------------------------------------------------------------
 232  * Start addresses for the final memory configuration
 233  * (Set up by the startup code)
 234  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 235  */
 236 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 237 #define CONFIG_SYS_SDRAM_SIZE           128     /* SDRAM size in MB */
 238
 239 #define CONFIG_SYS_MEMTEST_START        (CONFIG_SYS_SDRAM_BASE + 0x400)
 240 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 241 #define CONFIG_SYS_DRAM_TEST
 242
 243 #if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT)
 244 #define CONFIG_SERIAL_BOOT
 245 #endif
 246
 247 #if defined(CONFIG_SERIAL_BOOT)
 248 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
 249 #else
 250 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 251 #endif
 252
 253 #define CONFIG_SYS_BOOTPARAMS_LEN       (64 * 1024)
 254 /* Reserve 256 kB for Monitor */
 255 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)
 256 /* Reserve 256 kB for malloc() */
 257 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 258
 259 /*
 260  * For booting Linux, the board info and command line data
 261  * have to be in the first 8 MB of memory, since this is
 262  * the maximum mapped by the Linux kernel during initialization ??
 263  */
 264 /* Initial Memory map for Linux */
 265 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \
 266                                 (CONFIG_SYS_SDRAM_SIZE << 20))
 267
 268 /* Configuration for environment
 269  * Environment is embedded in u-boot in the second sector of the flash
 270  */
 271 #if !defined(CONFIG_SERIAL_BOOT)  /*MRAM boot*/
 272 #define CONFIG_ENV_ADDR         (0x40000 - 0x1000) /*MRAM size 40000*/
 273 #define CONFIG_ENV_SIZE         0x1000
 274 #endif
 275
 276 #if defined(CONFIG_CF_SBF)
 277 #define CONFIG_ENV_SPI_CS               1
 278 #define CONFIG_ENV_OFFSET               0x40000
 279 #define CONFIG_ENV_SIZE         0x2000
 280 #define CONFIG_ENV_SECT_SIZE            0x10000
 281 #endif
 282 #if defined(CONFIG_SYS_NAND_BOOT)
 283 #define CONFIG_ENV_OFFSET       0x80000
 284 #define CONFIG_ENV_SIZE 0x20000
 285 #define CONFIG_ENV_SECT_SIZE    0x20000
 286 #endif
 287 #undef CONFIG_ENV_OVERWRITE
 288
 289 /* FLASH organization */
 290 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 291
 292 #undef CONFIG_SYS_FLASH_CFI
 293 #ifdef CONFIG_SYS_FLASH_CFI
 294
 295 #define CONFIG_FLASH_CFI_DRIVER 1
 296 /* Max size that the board might have */
 297 #define CONFIG_SYS_FLASH_SIZE           0x1000000
 298 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 299 /* max number of memory banks */
 300 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 301 /* max number of sectors on one chip */
 302 #define CONFIG_SYS_MAX_FLASH_SECT       270
 303 /* "Real" (hardware) sectors protection */
 304 #define CONFIG_SYS_FLASH_PROTECTION
 305 #define CONFIG_SYS_FLASH_CHECKSUM
 306 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_CS0_BASE }
 307 #else
 308 /* max number of sectors on one chip */
 309 #define CONFIG_SYS_MAX_FLASH_SECT       270
 310 /* max number of sectors on one chip */
 311 #define CONFIG_SYS_MAX_FLASH_BANKS      0
 312 #endif
 313
 314 /*
 315  * This is setting for JFFS2 support in u-boot.
 316  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 317  */
 318 #ifdef CONFIG_CMD_JFFS2
 319 #define CONFIG_JFFS2_DEV                "nand0"
 320 #define CONFIG_JFFS2_PART_OFFSET        (0x800000)
 321 #define CONFIG_MTD_DEVICE
 322 #define MTDIDS_DEFAULT          "nand0=m54418twr.nand"
 323
 324 #define MTDPARTS_DEFAULT        "mtdparts=m54418twr.nand:1m(data),"     \
 325                                                 "7m(kernel),"           \
 326                                                 "-(rootfs)"
 327
 328 #endif
 329
 330 #ifdef CONFIG_CMD_UBI
 331 #define CONFIG_MTD_DEVICE       /* needed for mtdparts command */
 332 #define CONFIG_MTD_PARTITIONS   /* mtdparts and UBI support */
 333 #define MTDIDS_DEFAULT          "nand0=NAND"
 334 #define MTDPARTS_DEFAULT        "mtdparts=NAND:1m(u-boot),"     \
 335                                         "-(ubi)"
 336 #endif
 337 /* Cache Configuration */
 338 #define CONFIG_SYS_CACHELINE_SIZE       16
 339 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 340                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 341 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 342                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 343 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_BCINVA + CF_CACR_ICINVA)
 344 #define CONFIG_SYS_DCACHE_INV           (CF_CACR_DCINVA)
 345 #define CONFIG_SYS_CACHE_ACR2           (CONFIG_SYS_SDRAM_BASE | \
 346                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 347                                          CF_ACR_EN | CF_ACR_SM_ALL)
 348 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_BEC | CF_CACR_IEC | \
 349                                          CF_CACR_ICINVA | CF_CACR_EUSP)
 350 #define CONFIG_SYS_CACHE_DCACR          ((CONFIG_SYS_CACHE_ICACR | \
 351                                          CF_CACR_DEC | CF_CACR_DDCM_P | \
 352                                          CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
 353
 354 #define CACR_STATUS     (CONFIG_SYS_INIT_RAM_ADDR + \
 355                         CONFIG_SYS_INIT_RAM_SIZE - 12)
 356
 357 /*-----------------------------------------------------------------------
 358  * Memory bank definitions
 359  */
 360 /*
 361  * CS0 - NOR Flash 16MB
 362  * CS1 - Available
 363  * CS2 - Available
 364  * CS3 - Available
 365  * CS4 - Available
 366  * CS5 - Available
 367  */
 368
 369  /* Flash */
 370 #define CONFIG_SYS_CS0_BASE             0x00000000
 371 #define CONFIG_SYS_CS0_MASK             0x000F0101
 372 #define CONFIG_SYS_CS0_CTRL             0x00001D60
 373
 374 #endif                          /* _M54418TWR_H */