include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #include <asm/config_mpc85xx.h>
  14
  15 #ifdef CONFIG_RAMBOOT_PBL
  16
  17 #ifndef CONFIG_SECURE_BOOT
  18 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  19 #else
  20 #define CONFIG_SYS_FSL_PBL_PBI \
  21                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  22 #endif
  23
  24 #define CONFIG_SPL_FLUSH_IMAGE
  25 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  26 #define CONFIG_SYS_TEXT_BASE            0x30001000
  27 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  28 #define CONFIG_SPL_PAD_TO               0x40000
  29 #define CONFIG_SPL_MAX_SIZE             0x28000
  30 #ifdef CONFIG_SPL_BUILD
  31 #define CONFIG_SPL_SKIP_RELOCATE
  32 #define CONFIG_SPL_COMMON_INIT_DDR
  33 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  34 #define CONFIG_SYS_NO_FLASH
  35 #endif
  36 #define RESET_VECTOR_OFFSET             0x27FFC
  37 #define BOOT_PAGE_OFFSET                0x27000
  38
  39 #ifdef CONFIG_NAND
  40 #ifdef CONFIG_SECURE_BOOT
  41 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  42 /*
  43  * HDR would be appended at end of image and copied to DDR along
  44  * with U-Boot image.
  45  */
  46 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  47                                          CONFIG_U_BOOT_HDR_SIZE)
  48 #else
  49 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  50 #endif
  51 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  52 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  53 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  54 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  55 #ifdef CONFIG_TARGET_T1040RDB
  56 #define CONFIG_SYS_FSL_PBL_RCW \
  57 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
  58 #endif
  59 #ifdef CONFIG_TARGET_T1042RDB_PI
  60 #define CONFIG_SYS_FSL_PBL_RCW \
  61 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
  62 #endif
  63 #ifdef CONFIG_TARGET_T1042RDB
  64 #define CONFIG_SYS_FSL_PBL_RCW \
  65 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
  66 #endif
  67 #ifdef CONFIG_TARGET_T1040D4RDB
  68 #define CONFIG_SYS_FSL_PBL_RCW \
  69 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
  70 #endif
  71 #ifdef CONFIG_TARGET_T1042D4RDB
  72 #define CONFIG_SYS_FSL_PBL_RCW \
  73 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
  74 #endif
  75 #define CONFIG_SPL_NAND_BOOT
  76 #endif
  77
  78 #ifdef CONFIG_SPIFLASH
  79 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  80 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  82 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  83 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  84 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  85 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  86 #ifndef CONFIG_SPL_BUILD
  87 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  88 #endif
  89 #ifdef CONFIG_TARGET_T1040RDB
  90 #define CONFIG_SYS_FSL_PBL_RCW \
  91 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
  92 #endif
  93 #ifdef CONFIG_TARGET_T1042RDB_PI
  94 #define CONFIG_SYS_FSL_PBL_RCW \
  95 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
  96 #endif
  97 #ifdef CONFIG_TARGET_T1042RDB
  98 #define CONFIG_SYS_FSL_PBL_RCW \
  99 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
 100 #endif
 101 #ifdef CONFIG_TARGET_T1040D4RDB
 102 #define CONFIG_SYS_FSL_PBL_RCW \
 103 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
 104 #endif
 105 #ifdef CONFIG_TARGET_T1042D4RDB
 106 #define CONFIG_SYS_FSL_PBL_RCW \
 107 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 108 #endif
 109 #define CONFIG_SPL_SPI_BOOT
 110 #endif
 111
 112 #ifdef CONFIG_SDCARD
 113 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 114 #define CONFIG_SPL_MMC_MINIMAL
 115 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 116 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 117 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 118 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 119 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 120 #ifndef CONFIG_SPL_BUILD
 121 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 122 #endif
 123 #ifdef CONFIG_TARGET_T1040RDB
 124 #define CONFIG_SYS_FSL_PBL_RCW \
 125 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 126 #endif
 127 #ifdef CONFIG_TARGET_T1042RDB_PI
 128 #define CONFIG_SYS_FSL_PBL_RCW \
 129 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 130 #endif
 131 #ifdef CONFIG_TARGET_T1042RDB
 132 #define CONFIG_SYS_FSL_PBL_RCW \
 133 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 134 #endif
 135 #ifdef CONFIG_TARGET_T1040D4RDB
 136 #define CONFIG_SYS_FSL_PBL_RCW \
 137 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 138 #endif
 139 #ifdef CONFIG_TARGET_T1042D4RDB
 140 #define CONFIG_SYS_FSL_PBL_RCW \
 141 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 142 #endif
 143 #define CONFIG_SPL_MMC_BOOT
 144 #endif
 145
 146 #endif
 147
 148 /* High Level Configuration Options */
 149 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 150 #define CONFIG_MP                       /* support multiple processors */
 151
 152 /* support deep sleep */
 153 #define CONFIG_DEEP_SLEEP
 154
 155 #ifndef CONFIG_SYS_TEXT_BASE
 156 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 157 #endif
 158
 159 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 160 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 161 #endif
 162
 163 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 164 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
 165 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 166 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 167 #define CONFIG_PCI_INDIRECT_BRIDGE
 168 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 169 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 170 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 171 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 172
 173 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 174 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 175
 176 #define CONFIG_ENV_OVERWRITE
 177
 178 #ifndef CONFIG_SYS_NO_FLASH
 179 #define CONFIG_FLASH_CFI_DRIVER
 180 #define CONFIG_SYS_FLASH_CFI
 181 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 182 #endif
 183
 184 #if defined(CONFIG_SPIFLASH)
 185 #define CONFIG_SYS_EXTRA_ENV_RELOC
 186 #define CONFIG_ENV_IS_IN_SPI_FLASH
 187 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 188 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 189 #define CONFIG_ENV_SECT_SIZE            0x10000
 190 #elif defined(CONFIG_SDCARD)
 191 #define CONFIG_SYS_EXTRA_ENV_RELOC
 192 #define CONFIG_ENV_IS_IN_MMC
 193 #define CONFIG_SYS_MMC_ENV_DEV          0
 194 #define CONFIG_ENV_SIZE                 0x2000
 195 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 196 #elif defined(CONFIG_NAND)
 197 #ifdef CONFIG_SECURE_BOOT
 198 #define CONFIG_RAMBOOT_NAND
 199 #define CONFIG_BOOTSCRIPT_COPY_RAM
 200 #endif
 201 #define CONFIG_SYS_EXTRA_ENV_RELOC
 202 #define CONFIG_ENV_IS_IN_NAND
 203 #define CONFIG_ENV_SIZE                 0x2000
 204 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 205 #else
 206 #define CONFIG_ENV_IS_IN_FLASH
 207 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 208 #define CONFIG_ENV_SIZE         0x2000
 209 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 210 #endif
 211
 212 #define CONFIG_SYS_CLK_FREQ     100000000
 213 #define CONFIG_DDR_CLK_FREQ     66666666
 214
 215 /*
 216  * These can be toggled for performance analysis, otherwise use default.
 217  */
 218 #define CONFIG_SYS_CACHE_STASHING
 219 #define CONFIG_BACKSIDE_L2_CACHE
 220 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 221 #define CONFIG_BTB                      /* toggle branch predition */
 222 #define CONFIG_DDR_ECC
 223 #ifdef CONFIG_DDR_ECC
 224 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 225 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 226 #endif
 227
 228 #define CONFIG_ENABLE_36BIT_PHYS
 229
 230 #define CONFIG_ADDR_MAP
 231 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 232
 233 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 234 #define CONFIG_SYS_MEMTEST_END          0x00400000
 235 #define CONFIG_SYS_ALT_MEMTEST
 236 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 237
 238 /*
 239  *  Config the L3 Cache as L3 SRAM
 240  */
 241 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 242 /*
 243  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 244  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 245  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 246  */
 247 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 248 #define CONFIG_SYS_L3_SIZE              256 << 10
 249 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 250 #ifdef CONFIG_RAMBOOT_PBL
 251 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 252 #endif
 253 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 254 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 255 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 256 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 257
 258 #define CONFIG_SYS_DCSRBAR              0xf0000000
 259 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 260
 261 /*
 262  * DDR Setup
 263  */
 264 #define CONFIG_VERY_BIG_RAM
 265 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 266 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 267
 268 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 269 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 270
 271 #define CONFIG_DDR_SPD
 272
 273 #define CONFIG_SYS_SPD_BUS_NUM  0
 274 #define SPD_EEPROM_ADDRESS      0x51
 275
 276 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 277
 278 /*
 279  * IFC Definitions
 280  */
 281 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 282 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 283
 284 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 285 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 286                                 CSPR_PORT_SIZE_16 | \
 287                                 CSPR_MSEL_NOR | \
 288                                 CSPR_V)
 289 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 290
 291 /*
 292  * TDM Definition
 293  */
 294 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 295
 296 /* NOR Flash Timing Params */
 297 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 298 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 299                                 FTIM0_NOR_TEADC(0x5) | \
 300                                 FTIM0_NOR_TEAHC(0x5))
 301 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 302                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 303                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 304 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 305                                 FTIM2_NOR_TCH(0x4) | \
 306                                 FTIM2_NOR_TWPH(0x0E) | \
 307                                 FTIM2_NOR_TWP(0x1c))
 308 #define CONFIG_SYS_NOR_FTIM3    0x0
 309
 310 #define CONFIG_SYS_FLASH_QUIET_TEST
 311 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 312
 313 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 314 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 315 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 316 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 317
 318 #define CONFIG_SYS_FLASH_EMPTY_INFO
 319 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 320
 321 /* CPLD on IFC */
 322 #define CPLD_LBMAP_MASK                 0x3F
 323 #define CPLD_BANK_SEL_MASK              0x07
 324 #define CPLD_BANK_OVERRIDE              0x40
 325 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 326 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 327 #define CPLD_LBMAP_RESET                0xFF
 328 #define CPLD_LBMAP_SHIFT                0x03
 329
 330 #if defined(CONFIG_TARGET_T1042RDB_PI)
 331 #define CPLD_DIU_SEL_DFP                0x80
 332 #elif defined(CONFIG_TARGET_T1042D4RDB)
 333 #define CPLD_DIU_SEL_DFP                0xc0
 334 #endif
 335
 336 #if defined(CONFIG_TARGET_T1040D4RDB)
 337 #define CPLD_INT_MASK_ALL               0xFF
 338 #define CPLD_INT_MASK_THERM             0x80
 339 #define CPLD_INT_MASK_DVI_DFP           0x40
 340 #define CPLD_INT_MASK_QSGMII1           0x20
 341 #define CPLD_INT_MASK_QSGMII2           0x10
 342 #define CPLD_INT_MASK_SGMI1             0x08
 343 #define CPLD_INT_MASK_SGMI2             0x04
 344 #define CPLD_INT_MASK_TDMR1             0x02
 345 #define CPLD_INT_MASK_TDMR2             0x01
 346 #endif
 347
 348 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 349 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 350 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 351 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 352                                 | CSPR_PORT_SIZE_8 \
 353                                 | CSPR_MSEL_GPCM \
 354                                 | CSPR_V)
 355 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 356 #define CONFIG_SYS_CSOR2        0x0
 357 /* CPLD Timing parameters for IFC CS2 */
 358 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 359                                         FTIM0_GPCM_TEADC(0x0e) | \
 360                                         FTIM0_GPCM_TEAHC(0x0e))
 361 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 362                                         FTIM1_GPCM_TRAD(0x1f))
 363 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 364                                         FTIM2_GPCM_TCH(0x8) | \
 365                                         FTIM2_GPCM_TWP(0x1f))
 366 #define CONFIG_SYS_CS2_FTIM3            0x0
 367
 368 /* NAND Flash on IFC */
 369 #define CONFIG_NAND_FSL_IFC
 370 #define CONFIG_SYS_NAND_BASE            0xff800000
 371 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 372
 373 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 374 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 375                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 376                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 377                                 | CSPR_V)
 378 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 379
 380 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 381                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 382                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 383                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 384                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 385                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 386                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 387
 388 #define CONFIG_SYS_NAND_ONFI_DETECTION
 389
 390 /* ONFI NAND Flash mode0 Timing Params */
 391 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 392                                         FTIM0_NAND_TWP(0x18)   | \
 393                                         FTIM0_NAND_TWCHT(0x07) | \
 394                                         FTIM0_NAND_TWH(0x0a))
 395 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 396                                         FTIM1_NAND_TWBE(0x39)  | \
 397                                         FTIM1_NAND_TRR(0x0e)   | \
 398                                         FTIM1_NAND_TRP(0x18))
 399 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 400                                         FTIM2_NAND_TREH(0x0a) | \
 401                                         FTIM2_NAND_TWHRE(0x1e))
 402 #define CONFIG_SYS_NAND_FTIM3           0x0
 403
 404 #define CONFIG_SYS_NAND_DDR_LAW         11
 405 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 406 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 407 #define CONFIG_CMD_NAND
 408
 409 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 410
 411 #if defined(CONFIG_NAND)
 412 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 413 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 414 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 415 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 416 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 417 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 418 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 419 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 420 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 421 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 422 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 423 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 424 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 425 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 426 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 427 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 428 #else
 429 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 430 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 431 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 432 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 433 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 434 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 435 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 436 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 437 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 438 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 439 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 440 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 441 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 442 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 443 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 444 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 445 #endif
 446
 447 #ifdef CONFIG_SPL_BUILD
 448 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 449 #else
 450 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 451 #endif
 452
 453 #if defined(CONFIG_RAMBOOT_PBL)
 454 #define CONFIG_SYS_RAMBOOT
 455 #endif
 456
 457 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 458 #if defined(CONFIG_NAND)
 459 #define CONFIG_A008044_WORKAROUND
 460 #endif
 461 #endif
 462
 463 #define CONFIG_BOARD_EARLY_INIT_R
 464 #define CONFIG_MISC_INIT_R
 465
 466 #define CONFIG_HWCONFIG
 467
 468 /* define to use L1 as initial stack */
 469 #define CONFIG_L1_INIT_RAM
 470 #define CONFIG_SYS_INIT_RAM_LOCK
 471 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 472 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 473 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 474 /* The assembler doesn't like typecast */
 475 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 476         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 477           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 478 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 479
 480 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 481                                         GENERATED_GBL_DATA_SIZE)
 482 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 483
 484 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 485 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 486
 487 /* Serial Port - controlled on board with jumper J8
 488  * open - index 2
 489  * shorted - index 1
 490  */
 491 #define CONFIG_CONS_INDEX       1
 492 #define CONFIG_SYS_NS16550_SERIAL
 493 #define CONFIG_SYS_NS16550_REG_SIZE     1
 494 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 495
 496 #define CONFIG_SYS_BAUDRATE_TABLE       \
 497         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 498
 499 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 500 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 501 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 502 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 503
 504 #if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
 505 /* Video */
 506 #define CONFIG_FSL_DIU_FB
 507
 508 #ifdef CONFIG_FSL_DIU_FB
 509 #define CONFIG_FSL_DIU_CH7301
 510 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 511 #define CONFIG_CMD_BMP
 512 #define CONFIG_VIDEO_LOGO
 513 #define CONFIG_VIDEO_BMP_LOGO
 514 #endif
 515 #endif
 516
 517 /* I2C */
 518 #define CONFIG_SYS_I2C
 519 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 520 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 521 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 522 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 523 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 524 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 525 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 526 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 527 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 528 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 529 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 530 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 531 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 532
 533 /* I2C bus multiplexer */
 534 #define I2C_MUX_PCA_ADDR                0x70
 535 #define I2C_MUX_CH_DEFAULT      0x8
 536
 537 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 538         defined(CONFIG_TARGET_T1040D4RDB)       || \
 539         defined(CONFIG_TARGET_T1042D4RDB)
 540 /* LDI/DVI Encoder for display */
 541 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 542 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 543
 544 /*
 545  * RTC configuration
 546  */
 547 #define RTC
 548 #define CONFIG_RTC_DS1337               1
 549 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 550
 551 /*DVI encoder*/
 552 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 553 #endif
 554
 555 /*
 556  * eSPI - Enhanced SPI
 557  */
 558 #define CONFIG_SPI_FLASH_BAR
 559 #define CONFIG_SF_DEFAULT_SPEED         10000000
 560 #define CONFIG_SF_DEFAULT_MODE          0
 561 #define CONFIG_ENV_SPI_BUS              0
 562 #define CONFIG_ENV_SPI_CS               0
 563 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 564 #define CONFIG_ENV_SPI_MODE             0
 565
 566 /*
 567  * General PCI
 568  * Memory space is mapped 1-1, but I/O space must start from 0.
 569  */
 570
 571 #ifdef CONFIG_PCI
 572 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 573 #ifdef CONFIG_PCIE1
 574 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 575 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 576 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 577 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 578 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 579 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 580 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 581 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 582 #endif
 583
 584 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 585 #ifdef CONFIG_PCIE2
 586 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 587 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 588 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 589 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 590 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 591 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 592 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 593 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 594 #endif
 595
 596 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 597 #ifdef CONFIG_PCIE3
 598 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 599 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 600 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 601 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 602 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 603 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 604 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 605 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 606 #endif
 607
 608 /* controller 4, Base address 203000 */
 609 #ifdef CONFIG_PCIE4
 610 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 611 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 612 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 613 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 614 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 615 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 616 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 617 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 618 #endif
 619
 620 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 621 #define CONFIG_DOS_PARTITION
 622 #endif  /* CONFIG_PCI */
 623
 624 /* SATA */
 625 #define CONFIG_FSL_SATA_V2
 626 #ifdef CONFIG_FSL_SATA_V2
 627 #define CONFIG_LIBATA
 628 #define CONFIG_FSL_SATA
 629
 630 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 631 #define CONFIG_SATA1
 632 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 633 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 634
 635 #define CONFIG_LBA48
 636 #define CONFIG_CMD_SATA
 637 #define CONFIG_DOS_PARTITION
 638 #endif
 639
 640 /*
 641 * USB
 642 */
 643 #define CONFIG_HAS_FSL_DR_USB
 644
 645 #ifdef CONFIG_HAS_FSL_DR_USB
 646 #define CONFIG_USB_EHCI
 647
 648 #ifdef CONFIG_USB_EHCI
 649 #define CONFIG_USB_EHCI_FSL
 650 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 651 #endif
 652 #endif
 653
 654 #ifdef CONFIG_MMC
 655 #define CONFIG_FSL_ESDHC
 656 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 657 #define CONFIG_GENERIC_MMC
 658 #define CONFIG_DOS_PARTITION
 659 #endif
 660
 661 /* Qman/Bman */
 662 #ifndef CONFIG_NOBQFMAN
 663 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 664 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 665 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 666 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 667 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 668 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 669 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 670 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 671 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 672 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 673                                         CONFIG_SYS_BMAN_CENA_SIZE)
 674 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 675 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 676 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 677 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 678 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 679 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 680 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 681 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 682 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 683 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 684 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 685                                         CONFIG_SYS_QMAN_CENA_SIZE)
 686 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 687 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 688
 689 #define CONFIG_SYS_DPAA_FMAN
 690 #define CONFIG_SYS_DPAA_PME
 691
 692 #define CONFIG_QE
 693 #define CONFIG_U_QE
 694
 695 /* Default address of microcode for the Linux Fman driver */
 696 #if defined(CONFIG_SPIFLASH)
 697 /*
 698  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 699  * env, so we got 0x110000.
 700  */
 701 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 702 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 703 #elif defined(CONFIG_SDCARD)
 704 /*
 705  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 706  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 707  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 708  */
 709 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 710 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 711 #elif defined(CONFIG_NAND)
 712 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 713 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 714 #else
 715 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 716 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 717 #endif
 718
 719 #if defined(CONFIG_SPIFLASH)
 720 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 721 #elif defined(CONFIG_SDCARD)
 722 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 723 #elif defined(CONFIG_NAND)
 724 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 725 #else
 726 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 727 #endif
 728
 729 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 730 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 731 #endif /* CONFIG_NOBQFMAN */
 732
 733 #ifdef CONFIG_SYS_DPAA_FMAN
 734 #define CONFIG_FMAN_ENET
 735 #define CONFIG_PHY_VITESSE
 736 #define CONFIG_PHY_REALTEK
 737 #endif
 738
 739 #ifdef CONFIG_FMAN_ENET
 740 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 741 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 742 #elif defined(CONFIG_TARGET_T1040D4RDB)
 743 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 744 #elif defined(CONFIG_TARGET_T1042D4RDB)
 745 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 746 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 747 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 748 #endif
 749
 750 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 751 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 752 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 753 #else
 754 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 755 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 756 #endif
 757
 758 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 759 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 760 #define CONFIG_VSC9953
 761 #define CONFIG_CMD_ETHSW
 762 #ifdef CONFIG_TARGET_T1040RDB
 763 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 764 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 765 #else
 766 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 767 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 768 #endif
 769 #endif
 770
 771 #define CONFIG_MII              /* MII PHY management */
 772 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 773 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 774 #endif
 775
 776 /*
 777  * Environment
 778  */
 779 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 780 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 781
 782 /*
 783  * Command line configuration.
 784  */
 785 #ifdef CONFIG_TARGET_T1042RDB_PI
 786 #define CONFIG_CMD_DATE
 787 #endif
 788 #define CONFIG_CMD_ERRATA
 789 #define CONFIG_CMD_IRQ
 790 #define CONFIG_CMD_REGINFO
 791
 792 #ifdef CONFIG_PCI
 793 #define CONFIG_CMD_PCI
 794 #endif
 795
 796 /* Hash command with SHA acceleration supported in hardware */
 797 #ifdef CONFIG_FSL_CAAM
 798 #define CONFIG_CMD_HASH
 799 #define CONFIG_SHA_HW_ACCEL
 800 #endif
 801
 802 /*
 803  * Miscellaneous configurable options
 804  */
 805 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 806 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 807 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 808 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 809 #ifdef CONFIG_CMD_KGDB
 810 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 811 #else
 812 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 813 #endif
 814 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 815 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 816 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 817
 818 /*
 819  * For booting Linux, the board info and command line data
 820  * have to be in the first 64 MB of memory, since this is
 821  * the maximum mapped by the Linux kernel during initialization.
 822  */
 823 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 824 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 825
 826 #ifdef CONFIG_CMD_KGDB
 827 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 828 #endif
 829
 830 /*
 831  * Dynamic MTD Partition support with mtdparts
 832  */
 833 #ifndef CONFIG_SYS_NO_FLASH
 834 #define CONFIG_MTD_DEVICE
 835 #define CONFIG_MTD_PARTITIONS
 836 #define CONFIG_CMD_MTDPARTS
 837 #define CONFIG_FLASH_CFI_MTD
 838 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 839                         "spi0=spife110000.0"
 840 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 841                                 "128k(dtb),96m(fs),-(user);"\
 842                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 843                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 844                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 845 #endif
 846
 847 /*
 848  * Environment Configuration
 849  */
 850 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 851 #define CONFIG_BOOTFILE         "uImage"
 852 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 853
 854 /* default location for tftp and bootm */
 855 #define CONFIG_LOADADDR         1000000
 856
 857
 858 #define CONFIG_BAUDRATE 115200
 859
 860 #define __USB_PHY_TYPE  utmi
 861 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 862
 863 #ifdef CONFIG_TARGET_T1040RDB
 864 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 865 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 866 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 867 #elif defined(CONFIG_TARGET_T1042RDB)
 868 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 869 #elif defined(CONFIG_TARGET_T1040D4RDB)
 870 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 871 #elif defined(CONFIG_TARGET_T1042D4RDB)
 872 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 873 #endif
 874
 875 #ifdef CONFIG_FSL_DIU_FB
 876 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 877 #else
 878 #define DIU_ENVIRONMENT
 879 #endif
 880
 881 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 882         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 883         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 884         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 885         "netdev=eth0\0"                                         \
 886         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 887         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 888         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 889         "tftpflash=tftpboot $loadaddr $uboot && "               \
 890         "protect off $ubootaddr +$filesize && "                 \
 891         "erase $ubootaddr +$filesize && "                       \
 892         "cp.b $loadaddr $ubootaddr $filesize && "               \
 893         "protect on $ubootaddr +$filesize && "                  \
 894         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 895         "consoledev=ttyS0\0"                                    \
 896         "ramdiskaddr=2000000\0"                                 \
 897         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 898         "fdtaddr=1e00000\0"                                     \
 899         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 900         "bdev=sda3\0"
 901
 902 #define CONFIG_LINUX                       \
 903         "setenv bootargs root=/dev/ram rw "            \
 904         "console=$consoledev,$baudrate $othbootargs;"  \
 905         "setenv ramdiskaddr 0x02000000;"               \
 906         "setenv fdtaddr 0x00c00000;"                   \
 907         "setenv loadaddr 0x1000000;"                   \
 908         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 909
 910 #define CONFIG_HDBOOT                                   \
 911         "setenv bootargs root=/dev/$bdev rw "           \
 912         "console=$consoledev,$baudrate $othbootargs;"   \
 913         "tftp $loadaddr $bootfile;"                     \
 914         "tftp $fdtaddr $fdtfile;"                       \
 915         "bootm $loadaddr - $fdtaddr"
 916
 917 #define CONFIG_NFSBOOTCOMMAND                   \
 918         "setenv bootargs root=/dev/nfs rw "     \
 919         "nfsroot=$serverip:$rootpath "          \
 920         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 921         "console=$consoledev,$baudrate $othbootargs;"   \
 922         "tftp $loadaddr $bootfile;"             \
 923         "tftp $fdtaddr $fdtfile;"               \
 924         "bootm $loadaddr - $fdtaddr"
 925
 926 #define CONFIG_RAMBOOTCOMMAND                           \
 927         "setenv bootargs root=/dev/ram rw "             \
 928         "console=$consoledev,$baudrate $othbootargs;"   \
 929         "tftp $ramdiskaddr $ramdiskfile;"               \
 930         "tftp $loadaddr $bootfile;"                     \
 931         "tftp $fdtaddr $fdtfile;"                       \
 932         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 933
 934 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 935
 936 #include <asm/fsl_secure_boot.h>
 937
 938 #endif  /* __CONFIG_H */