include/configs/am335x_evm.h

   1 /*
   2  * am335x_evm.h
   3  *
   4  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation version 2.
   9  *
  10  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  11  * kind, whether express or implied; without even the implied warranty
  12  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  */
  15
  16 #ifndef __CONFIG_AM335X_EVM_H
  17 #define __CONFIG_AM335X_EVM_H
  18
  19 #include <configs/ti_am335x_common.h>
  20
  21 #ifndef CONFIG_SPL_BUILD
  22 # define CONFIG_FIT
  23 # define CONFIG_TIMESTAMP
  24 # define CONFIG_LZO
  25 # ifdef CONFIG_ENABLE_VBOOT
  26 #  define CONFIG_FIT_SIGNATURE
  27 #  define CONFIG_RSA
  28 # endif
  29 #endif
  30
  31 #define CONFIG_SYS_BOOTM_LEN            (16 << 20)
  32
  33 #define MACH_TYPE_TIAM335EVM            3589    /* Until the next sync */
  34 #define CONFIG_MACH_TYPE                MACH_TYPE_TIAM335EVM
  35 #define CONFIG_BOARD_LATE_INIT
  36
  37 /* Clock Defines */
  38 #define V_OSCK                          24000000  /* Clock output from T2 */
  39 #define V_SCLK                          (V_OSCK)
  40
  41 /* Custom script for NOR */
  42 #define CONFIG_SYS_LDSCRIPT             "board/ti/am335x/u-boot.lds"
  43
  44 /* Always 128 KiB env size */
  45 #define CONFIG_ENV_SIZE                 (128 << 10)
  46
  47 /* Enhance our eMMC support / experience. */
  48 #define CONFIG_CMD_GPT
  49 #define CONFIG_EFI_PARTITION
  50 #define CONFIG_PARTITION_UUIDS
  51 #define CONFIG_CMD_PART
  52
  53 #ifdef CONFIG_NAND
  54 #define NANDARGS \
  55         "mtdids=" MTDIDS_DEFAULT "\0" \
  56         "mtdparts=" MTDPARTS_DEFAULT "\0" \
  57         "nandargs=setenv bootargs console=${console} " \
  58                 "${optargs} " \
  59                 "root=${nandroot} " \
  60                 "rootfstype=${nandrootfstype}\0" \
  61         "nandroot=ubi0:rootfs rw ubi.mtd=9,2048\0" \
  62         "nandrootfstype=ubifs rootwait=1\0" \
  63         "nandboot=echo Booting from nand ...; " \
  64                 "run nandargs; " \
  65                 "nand read ${fdtaddr} u-boot-spl-os; " \
  66                 "nand read ${loadaddr} kernel; " \
  67                 "bootz ${loadaddr} - ${fdtaddr}\0"
  68 #else
  69 #define NANDARGS ""
  70 #endif
  71
  72 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  73
  74 #ifndef CONFIG_SPL_BUILD
  75 #define CONFIG_EXTRA_ENV_SETTINGS \
  76         DEFAULT_LINUX_BOOT_ENV \
  77         "boot_fdt=try\0" \
  78         "bootpart=0:2\0" \
  79         "bootdir=/boot\0" \
  80         "bootfile=zImage\0" \
  81         "fdtfile=undefined\0" \
  82         "console=ttyO0,115200n8\0" \
  83         "partitions=" \
  84                 "uuid_disk=${uuid_gpt_disk};" \
  85                 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
  86         "optargs=\0" \
  87         "mmcdev=0\0" \
  88         "mmcroot=/dev/mmcblk0p2 ro\0" \
  89         "mmcrootfstype=ext4 rootwait\0" \
  90         "rootpath=/export/rootfs\0" \
  91         "nfsopts=nolock\0" \
  92         "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
  93                 "::off\0" \
  94         "ramroot=/dev/ram0 rw\0" \
  95         "ramrootfstype=ext2\0" \
  96         "mmcargs=setenv bootargs console=${console} " \
  97                 "${optargs} " \
  98                 "root=${mmcroot} " \
  99                 "rootfstype=${mmcrootfstype}\0" \
 100         "spiroot=/dev/mtdblock4 rw\0" \
 101         "spirootfstype=jffs2\0" \
 102         "spisrcaddr=0xe0000\0" \
 103         "spiimgsize=0x362000\0" \
 104         "spibusno=0\0" \
 105         "spiargs=setenv bootargs console=${console} " \
 106                 "${optargs} " \
 107                 "root=${spiroot} " \
 108                 "rootfstype=${spirootfstype}\0" \
 109         "netargs=setenv bootargs console=${console} " \
 110                 "${optargs} " \
 111                 "root=/dev/nfs " \
 112                 "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
 113                 "ip=dhcp\0" \
 114         "bootenv=uEnv.txt\0" \
 115         "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 116         "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
 117                 "source ${loadaddr}\0" \
 118         "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
 119         "importbootenv=echo Importing environment from mmc ...; " \
 120                 "env import -t -r $loadaddr $filesize\0" \
 121         "ramargs=setenv bootargs console=${console} " \
 122                 "${optargs} " \
 123                 "root=${ramroot} " \
 124                 "rootfstype=${ramrootfstype}\0" \
 125         "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
 126         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 127         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 128         "mmcloados=run mmcargs; " \
 129                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 130                         "if run loadfdt; then " \
 131                                 "bootz ${loadaddr} - ${fdtaddr}; " \
 132                         "else " \
 133                                 "if test ${boot_fdt} = try; then " \
 134                                         "bootz; " \
 135                                 "else " \
 136                                         "echo WARN: Cannot load the DT; " \
 137                                 "fi; " \
 138                         "fi; " \
 139                 "else " \
 140                         "bootz; " \
 141                 "fi;\0" \
 142         "mmcboot=mmc dev ${mmcdev}; " \
 143                 "if mmc rescan; then " \
 144                         "echo SD/MMC found on device ${mmcdev};" \
 145                         "if run loadbootscript; then " \
 146                                 "run bootscript;" \
 147                         "else " \
 148                                 "if run loadbootenv; then " \
 149                                         "echo Loaded environment from ${bootenv};" \
 150                                         "run importbootenv;" \
 151                                 "fi;" \
 152                                 "if test -n $uenvcmd; then " \
 153                                         "echo Running uenvcmd ...;" \
 154                                         "run uenvcmd;" \
 155                                 "fi;" \
 156                                 "if run loadimage; then " \
 157                                         "run mmcloados;" \
 158                                 "fi;" \
 159                         "fi ;" \
 160                 "fi;\0" \
 161         "spiboot=echo Booting from spi ...; " \
 162                 "run spiargs; " \
 163                 "sf probe ${spibusno}:0; " \
 164                 "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
 165                 "bootz ${loadaddr}\0" \
 166         "netboot=echo Booting from network ...; " \
 167                 "setenv autoload no; " \
 168                 "dhcp; " \
 169                 "tftp ${loadaddr} ${bootfile}; " \
 170                 "tftp ${fdtaddr} ${fdtfile}; " \
 171                 "run netargs; " \
 172                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 173         "ramboot=echo Booting from ramdisk ...; " \
 174                 "run ramargs; " \
 175                 "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
 176         "findfdt="\
 177                 "if test $board_name = A335BONE; then " \
 178                         "setenv fdtfile am335x-bone.dtb; fi; " \
 179                 "if test $board_name = A335BNLT; then " \
 180                         "setenv fdtfile am335x-boneblack.dtb; fi; " \
 181                 "if test $board_name = A33515BB; then " \
 182                         "setenv fdtfile am335x-evm.dtb; fi; " \
 183                 "if test $board_name = A335X_SK; then " \
 184                         "setenv fdtfile am335x-evmsk.dtb; fi; " \
 185                 "if test $fdtfile = undefined; then " \
 186                         "echo WARNING: Could not determine device tree to use; fi; \0" \
 187         NANDARGS \
 188         DFUARGS
 189 #endif
 190
 191 #define CONFIG_BOOTCOMMAND \
 192         "run findfdt; " \
 193         "run mmcboot;" \
 194         "setenv mmcdev 1; " \
 195         "setenv bootpart 1:2; " \
 196         "run mmcboot;" \
 197         "run nandboot;"
 198
 199 /* NS16550 Configuration */
 200 #define CONFIG_SYS_NS16550_COM1         0x44e09000      /* Base EVM has UART0 */
 201 #define CONFIG_SYS_NS16550_COM2         0x48022000      /* UART1 */
 202 #define CONFIG_SYS_NS16550_COM3         0x48024000      /* UART2 */
 203 #define CONFIG_SYS_NS16550_COM4         0x481a6000      /* UART3 */
 204 #define CONFIG_SYS_NS16550_COM5         0x481a8000      /* UART4 */
 205 #define CONFIG_SYS_NS16550_COM6         0x481aa000      /* UART5 */
 206 #define CONFIG_BAUDRATE                 115200
 207
 208 #define CONFIG_CMD_EEPROM
 209 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 210 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* Main EEPROM */
 211 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 212 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 213
 214 /* PMIC support */
 215 #define CONFIG_POWER_TPS65217
 216 #define CONFIG_POWER_TPS65910
 217
 218 /* SPL */
 219 #ifndef CONFIG_NOR_BOOT
 220 #define CONFIG_SPL_POWER_SUPPORT
 221 #define CONFIG_SPL_YMODEM_SUPPORT
 222
 223 /* Bootcount using the RTC block */
 224 #define CONFIG_BOOTCOUNT_LIMIT
 225 #define CONFIG_BOOTCOUNT_AM33XX
 226
 227 /* USB gadget RNDIS */
 228 #define CONFIG_SPL_MUSB_NEW_SUPPORT
 229
 230 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/am33xx/u-boot-spl.lds"
 231 #endif
 232
 233 #ifdef CONFIG_NAND
 234 /* NAND: device related configs */
 235 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 236 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 237                                          CONFIG_SYS_NAND_PAGE_SIZE)
 238 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 239 #define CONFIG_SYS_NAND_OOBSIZE         64
 240 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 241 /* NAND: driver related configs */
 242 #define CONFIG_NAND_OMAP_GPMC
 243 #define CONFIG_NAND_OMAP_ELM
 244 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 245 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 246                                          10, 11, 12, 13, 14, 15, 16, 17, \
 247                                          18, 19, 20, 21, 22, 23, 24, 25, \
 248                                          26, 27, 28, 29, 30, 31, 32, 33, \
 249                                          34, 35, 36, 37, 38, 39, 40, 41, \
 250                                          42, 43, 44, 45, 46, 47, 48, 49, \
 251                                          50, 51, 52, 53, 54, 55, 56, 57, }
 252
 253 #define CONFIG_SYS_NAND_ECCSIZE         512
 254 #define CONFIG_SYS_NAND_ECCBYTES        14
 255 #define CONFIG_SYS_NAND_ONFI_DETECTION
 256 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 257 #define MTDIDS_DEFAULT                  "nand0=nand.0"
 258 #define MTDPARTS_DEFAULT                "mtdparts=nand.0:" \
 259                                         "128k(NAND.SPL)," \
 260                                         "128k(NAND.SPL.backup1)," \
 261                                         "128k(NAND.SPL.backup2)," \
 262                                         "128k(NAND.SPL.backup3)," \
 263                                         "256k(NAND.u-boot-spl-os)," \
 264                                         "1m(NAND.u-boot)," \
 265                                         "128k(NAND.u-boot-env)," \
 266                                         "128k(NAND.u-boot-env.backup1)," \
 267                                         "8m(NAND.kernel)," \
 268                                         "-(NAND.rootfs)"
 269 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x000c0000
 270 #undef CONFIG_ENV_IS_NOWHERE
 271 #define CONFIG_ENV_IS_IN_NAND
 272 #define CONFIG_ENV_OFFSET               0x001c0000
 273 #define CONFIG_ENV_OFFSET_REDUND        0x001e0000
 274 #define CONFIG_SYS_ENV_SECT_SIZE        CONFIG_SYS_NAND_BLOCK_SIZE
 275 /* NAND: SPL related configs */
 276 #ifdef CONFIG_SPL_NAND_SUPPORT
 277 #define CONFIG_SPL_NAND_AM33XX_BCH
 278 #endif
 279 #ifdef CONFIG_SPL_OS_BOOT
 280 #define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
 281 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
 282 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 283 #endif
 284 #endif /* !CONFIG_NAND */
 285
 286 /*
 287  * For NOR boot, we must set this to the start of where NOR is mapped
 288  * in memory.
 289  */
 290 #ifdef CONFIG_NOR_BOOT
 291 #define CONFIG_SYS_TEXT_BASE            0x08000000
 292 #endif
 293
 294 /*
 295  * USB configuration.  We enable MUSB support, both for host and for
 296  * gadget.  We set USB0 as peripheral and USB1 as host, based on the
 297  * board schematic and physical port wired to each.  Then for host we
 298  * add mass storage support and for gadget we add both RNDIS ethernet
 299  * and DFU.
 300  */
 301 #define CONFIG_USB_MUSB_DSPS
 302 #define CONFIG_ARCH_MISC_INIT
 303 #define CONFIG_MUSB_GADGET
 304 #define CONFIG_MUSB_PIO_ONLY
 305 #define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
 306 #define CONFIG_USB_GADGET
 307 #define CONFIG_USBDOWNLOAD_GADGET
 308 #define CONFIG_USB_GADGET_DUALSPEED
 309 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 310 #define CONFIG_MUSB_HOST
 311 #define CONFIG_AM335X_USB0
 312 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
 313 #define CONFIG_AM335X_USB1
 314 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 315
 316 #ifdef CONFIG_MUSB_HOST
 317 #define CONFIG_CMD_USB
 318 #define CONFIG_USB_STORAGE
 319 #endif
 320
 321 #ifdef CONFIG_MUSB_GADGET
 322 #define CONFIG_USB_ETHER
 323 #define CONFIG_USB_ETH_RNDIS
 324 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
 325
 326 /* USB TI's IDs */
 327 #define CONFIG_G_DNL_VENDOR_NUM 0x0403
 328 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
 329 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 330 #endif /* CONFIG_MUSB_GADGET */
 331
 332 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
 333 /* disable host part of MUSB in SPL */
 334 #undef CONFIG_MUSB_HOST
 335 /* disable EFI partitions and partition UUID support */
 336 #undef CONFIG_PARTITION_UUIDS
 337 #undef CONFIG_EFI_PARTITION
 338 /* General network SPL  */
 339 #define CONFIG_SPL_NET_SUPPORT
 340 #define CONFIG_SPL_ENV_SUPPORT
 341 #define CONFIG_SPL_NET_VCI_STRING       "AM335x U-Boot SPL"
 342 #endif
 343
 344 /* USB Device Firmware Update support */
 345 #ifndef CONFIG_SPL_BUILD
 346 #define CONFIG_DFU_FUNCTION
 347 #define CONFIG_DFU_MMC
 348 #define CONFIG_CMD_DFU
 349 #define DFU_ALT_INFO_MMC \
 350         "dfu_alt_info_mmc=" \
 351         "boot part 0 1;" \
 352         "rootfs part 0 2;" \
 353         "MLO fat 0 1;" \
 354         "MLO.raw mmc 0x100 0x100;" \
 355         "u-boot.img.raw mmc 0x300 0x400;" \
 356         "spl-os-args.raw mmc 0x80 0x80;" \
 357         "spl-os-image.raw mmc 0x900 0x2000;" \
 358         "spl-os-args fat 0 1;" \
 359         "spl-os-image fat 0 1;" \
 360         "u-boot.img fat 0 1;" \
 361         "uEnv.txt fat 0 1\0"
 362 #ifdef CONFIG_NAND
 363 #define CONFIG_DFU_NAND
 364 #define DFU_ALT_INFO_NAND \
 365         "dfu_alt_info_nand=" \
 366         "SPL part 0 1;" \
 367         "SPL.backup1 part 0 2;" \
 368         "SPL.backup2 part 0 3;" \
 369         "SPL.backup3 part 0 4;" \
 370         "u-boot part 0 5;" \
 371         "u-boot-spl-os part 0 6;" \
 372         "kernel part 0 8;" \
 373         "rootfs part 0 9\0"
 374 #else
 375 #define DFU_ALT_INFO_NAND ""
 376 #endif
 377 #define CONFIG_DFU_RAM
 378 #define DFU_ALT_INFO_RAM \
 379         "dfu_alt_info_ram=" \
 380         "kernel ram 0x80200000 0xD80000;" \
 381         "fdt ram 0x80F80000 0x80000;" \
 382         "ramdisk ram 0x81000000 0x4000000\0"
 383 #define DFUARGS \
 384         "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
 385         DFU_ALT_INFO_MMC \
 386         DFU_ALT_INFO_RAM \
 387         DFU_ALT_INFO_NAND
 388 #endif
 389
 390 /*
 391  * Default to using SPI for environment, etc.
 392  * 0x000000 - 0x020000 : SPL (128KiB)
 393  * 0x020000 - 0x0A0000 : U-Boot (512KiB)
 394  * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB)
 395  * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB)
 396  * 0x0E0000 - 0x442000 : Linux Kernel
 397  * 0x442000 - 0x800000 : Userland
 398  */
 399 #if defined(CONFIG_SPI_BOOT)
 400 /* SPL related */
 401 #undef CONFIG_SPL_OS_BOOT               /* Not supported by existing map */
 402 #define CONFIG_SPL_SPI_SUPPORT
 403 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 404 #define CONFIG_SPL_SPI_LOAD
 405 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 406
 407 #define CONFIG_ENV_IS_IN_SPI_FLASH
 408 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 409 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 410 #define CONFIG_ENV_SECT_SIZE            (4 << 10) /* 4 KB sectors */
 411 #define CONFIG_ENV_OFFSET               (768 << 10) /* 768 KiB in */
 412 #define CONFIG_ENV_OFFSET_REDUND        (896 << 10) /* 896 KiB in */
 413 #define MTDIDS_DEFAULT                  "nor0=m25p80-flash.0"
 414 #define MTDPARTS_DEFAULT                "mtdparts=m25p80-flash.0:128k(SPL)," \
 415                                         "512k(u-boot),128k(u-boot-env1)," \
 416                                         "128k(u-boot-env2),3464k(kernel)," \
 417                                         "-(rootfs)"
 418 #elif defined(CONFIG_EMMC_BOOT)
 419 #undef CONFIG_ENV_IS_NOWHERE
 420 #define CONFIG_ENV_IS_IN_MMC
 421 #define CONFIG_SPL_ENV_SUPPORT
 422 #define CONFIG_SYS_MMC_ENV_DEV          1
 423 #define CONFIG_SYS_MMC_ENV_PART         2
 424 #define CONFIG_ENV_OFFSET               0x0
 425 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 426 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 427 #endif
 428
 429 /* SPI flash. */
 430 #define CONFIG_CMD_SF
 431 #define CONFIG_SPI_FLASH
 432 #define CONFIG_SPI_FLASH_WINBOND
 433 #define CONFIG_SF_DEFAULT_SPEED         24000000
 434
 435 /* Network. */
 436 #define CONFIG_PHY_GIGE
 437 #define CONFIG_PHYLIB
 438 #define CONFIG_PHY_SMSC
 439
 440 /*
 441  * NOR Size = 16 MiB
 442  * Number of Sectors/Blocks = 128
 443  * Sector Size = 128 KiB
 444  * Word length = 16 bits
 445  * Default layout:
 446  * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
 447  * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
 448  * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
 449  * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
 450  * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
 451  */
 452 #if defined(CONFIG_NOR)
 453 #undef CONFIG_SYS_NO_FLASH
 454 #define CONFIG_CMD_FLASH
 455 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 456 #define CONFIG_SYS_FLASH_PROTECTION
 457 #define CONFIG_SYS_FLASH_CFI
 458 #define CONFIG_FLASH_CFI_DRIVER
 459 #define CONFIG_FLASH_CFI_MTD
 460 #define CONFIG_SYS_MAX_FLASH_SECT       128
 461 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 462 #define CONFIG_SYS_FLASH_BASE           (0x08000000)
 463 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 464 #define CONFIG_SYS_FLASH_SIZE           0x01000000
 465 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 466 /* Reduce SPL size by removing unlikey targets */
 467 #ifdef CONFIG_NOR_BOOT
 468 #define CONFIG_ENV_IS_IN_FLASH
 469 #define CONFIG_ENV_SECT_SIZE            (128 << 10)     /* 128 KiB */
 470 #define CONFIG_ENV_OFFSET               (512 << 10)     /* 512 KiB */
 471 #define CONFIG_ENV_OFFSET_REDUND        (768 << 10)     /* 768 KiB */
 472 #define MTDIDS_DEFAULT                  "nor0=physmap-flash.0"
 473 #define MTDPARTS_DEFAULT                "mtdparts=physmap-flash.0:" \
 474                                         "512k(u-boot)," \
 475                                         "128k(u-boot-env1)," \
 476                                         "128k(u-boot-env2)," \
 477                                         "4m(kernel),-(rootfs)"
 478 #endif
 479 #endif  /* NOR support */
 480
 481 #endif  /* ! __CONFIG_AM335X_EVM_H */