include/configs/colibri_vf.h

   1 /*
   2  * Copyright 2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex VF50/VF61 module.
   5  *
   6  * Based on vf610twr.h:
   7  * Copyright 2013 Freescale Semiconductor, Inc.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 #define CONFIG_VF610
  18 #define CONFIG_SYS_THUMB_BUILD
  19 #define CONFIG_USE_ARCH_MEMCPY
  20 #define CONFIG_USE_ARCH_MEMSET
  21 #define CONFIG_SYS_FSL_CLK
  22
  23 #define CONFIG_ARCH_MISC_INIT
  24 #define CONFIG_DISPLAY_CPUINFO
  25 #define CONFIG_DISPLAY_BOARDINFO
  26
  27 #define CONFIG_SKIP_LOWLEVEL_INIT
  28
  29 #define CONFIG_CMD_FUSE
  30 #ifdef CONFIG_CMD_FUSE
  31 #define CONFIG_MXC_OCOTP
  32 #endif
  33
  34 /* Size of malloc() pool */
  35 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  36
  37 #define CONFIG_BOARD_EARLY_INIT_F
  38
  39 /* Allow to overwrite serial and ethaddr */
  40 #define CONFIG_ENV_OVERWRITE
  41 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  42 #define CONFIG_BAUDRATE                 115200
  43
  44 /* NAND support */
  45 #define CONFIG_CMD_NAND
  46 #define CONFIG_SYS_NAND_ONFI_DETECTION
  47 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  48 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  49
  50 /* Dynamic MTD partition support */
  51 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
  52 #define CONFIG_MTD_PARTITIONS
  53 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  54 #define MTDIDS_DEFAULT          "nand0=vf610_nfc"
  55 #define MTDPARTS_DEFAULT        "mtdparts=vf610_nfc:"           \
  56                                 "128k(vf-bcb)ro,"               \
  57                                 "1408k(u-boot)ro,"              \
  58                                 "512k(u-boot-env),"             \
  59                                 "-(ubi)"
  60
  61 #define CONFIG_MMC
  62 #define CONFIG_FSL_ESDHC
  63 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  64 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  65
  66 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  67
  68 #define CONFIG_GENERIC_MMC
  69 #define CONFIG_DOS_PARTITION
  70
  71 #define CONFIG_RBTREE
  72 #define CONFIG_LZO
  73 #define CONFIG_CMD_UBI
  74 #define CONFIG_MTD_UBI_FASTMAP
  75 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
  76
  77 #define CONFIG_FEC_MXC
  78 #define CONFIG_MII
  79 #define IMX_FEC_BASE                    ENET1_BASE_ADDR
  80 #define CONFIG_FEC_XCV_TYPE             RMII
  81 #define CONFIG_FEC_MXC_PHYADDR          0
  82 #define CONFIG_PHYLIB
  83 #define CONFIG_PHY_MICREL
  84
  85 #define CONFIG_IPADDR           192.168.10.2
  86 #define CONFIG_NETMASK          255.255.255.0
  87 #define CONFIG_SERVERIP         192.168.10.1
  88
  89 #define CONFIG_BOARD_LATE_INIT
  90
  91 #define CONFIG_LOADADDR                 0x80008000
  92 #define CONFIG_FDTADDR                  0x84000000
  93
  94 /* We boot from the gfxRAM area of the OCRAM. */
  95 #define CONFIG_SYS_TEXT_BASE            0x3f408000
  96 #define CONFIG_BOARD_SIZE_LIMIT         524288
  97
  98 #define SD_BOOTCMD \
  99         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
 100         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
 101         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
 102         "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
 103         "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 104         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 105
 106 #define NFS_BOOTCMD \
 107         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
 108         "nfsboot=run setup; " \
 109         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
 110         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
 111         "dhcp ${kernel_addr_r} && "     \
 112         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 113         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 114
 115 #define UBI_BOOTCMD     \
 116         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 117         "ubi.fm_autoconvert=1\0" \
 118         "ubiboot=run setup; " \
 119         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 120         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 121         "ubi part ubi && ubifsmount ubi0:rootfs && " \
 122         "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
 123         "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 124         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 125
 126 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 127
 128 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 129
 130 #define CONFIG_EXTRA_ENV_SETTINGS \
 131         "kernel_addr_r=0x82000000\0" \
 132         "fdt_addr_r=0x84000000\0" \
 133         "kernel_file=zImage\0" \
 134         "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 135         "fdt_board=eval-v3\0" \
 136         "defargs=\0" \
 137         "console=ttyLP0\0" \
 138         "setup=setenv setupargs " \
 139         "console=tty1 console=${console}" \
 140         ",${baudrate}n8 ${memargs}\0" \
 141         "setsdupdate=mmc rescan && set interface mmc && " \
 142         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 143         "source ${loadaddr}\0" \
 144         "setusbupdate=usb start && set interface usb && " \
 145         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 146         "source ${loadaddr}\0" \
 147         "setupdate=run setsdupdate || run setusbupdate\0" \
 148         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 149         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 150         SD_BOOTCMD \
 151         NFS_BOOTCMD \
 152         UBI_BOOTCMD
 153
 154 /* Miscellaneous configurable options */
 155 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 156 #undef CONFIG_AUTO_COMPLETE
 157 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 158 #define CONFIG_SYS_PBSIZE               \
 159                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 160 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 161 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 162
 163 #define CONFIG_SYS_MEMTEST_START        0x80010000
 164 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 165
 166 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 167 #define CONFIG_SYS_HZ                   1000
 168 #define CONFIG_CMDLINE_EDITING
 169
 170 /*
 171  * Stack sizes
 172  * The stack sizes are set up in start.S using the settings below
 173  */
 174 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 175
 176 /* Physical memory map */
 177 #define CONFIG_NR_DRAM_BANKS            1
 178 #define PHYS_SDRAM                      (0x80000000)
 179 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 180
 181 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 182 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 183 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 184
 185 #define CONFIG_SYS_INIT_SP_OFFSET \
 186         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 187 #define CONFIG_SYS_INIT_SP_ADDR \
 188         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 189
 190 /* Environment organization */
 191 #define CONFIG_SYS_NO_FLASH
 192
 193 #ifdef CONFIG_ENV_IS_IN_MMC
 194 #define CONFIG_SYS_MMC_ENV_DEV          0
 195 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 196 #define CONFIG_ENV_SIZE                 (8 * 1024)
 197 #endif
 198
 199 #ifdef CONFIG_ENV_IS_IN_NAND
 200 #define CONFIG_ENV_SIZE                 (64 * 2048)
 201 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 202 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 203 #endif
 204
 205 #define CONFIG_SYS_NO_FLASH
 206
 207 /* USB Host Support */
 208 #define CONFIG_USB_EHCI
 209 #define CONFIG_USB_EHCI_VF
 210 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 211 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 212
 213 /* USB Client Support */
 214 #define CONFIG_TRDX_VID                  0x1B67
 215 #define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
 216 #define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
 217 #define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
 218 #define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019
 219
 220 /* USB DFU */
 221 #define CONFIG_USB_FUNCTION_DFU
 222 #define CONFIG_DFU_NAND
 223 #define CONFIG_DFU_MMC
 224 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 225
 226 /* USB Storage */
 227 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 228
 229 #endif /* __CONFIG_H */