]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/dbau1x00.h
rename CFG_ macros to CONFIG_SYS
[people/ms/u-boot.git] / include / configs / dbau1x00.h
1 /*
2 * (C) Copyright 2003
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24 /*
25 * This file contains the configuration parameters for the dbau1x00 board.
26 */
27
28 #ifndef __CONFIG_H
29 #define __CONFIG_H
30
31 #define CONFIG_MIPS32 1 /* MIPS32 CPU core */
32 #define CONFIG_DBAU1X00 1
33 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
34
35 #ifdef CONFIG_DBAU1000
36 /* Also known as Merlot */
37 #define CONFIG_SOC_AU1000 1
38 #else
39 #ifdef CONFIG_DBAU1100
40 #define CONFIG_SOC_AU1100 1
41 #else
42 #ifdef CONFIG_DBAU1500
43 #define CONFIG_SOC_AU1500 1
44 #else
45 #ifdef CONFIG_DBAU1550
46 /* Cabernet */
47 #define CONFIG_SOC_AU1550 1
48 #else
49 #error "No valid board set"
50 #endif
51 #endif
52 #endif
53 #endif
54
55 #define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */
56
57 #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
58
59 #define CONFIG_BAUDRATE 115200
60
61 /* valid baudrates */
62 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
63
64 #define CONFIG_TIMESTAMP /* Print image info with timestamp */
65 #undef CONFIG_BOOTARGS
66
67 #define CONFIG_EXTRA_ENV_SETTINGS \
68 "addmisc=setenv bootargs ${bootargs} " \
69 "console=ttyS0,${baudrate} " \
70 "panic=1\0" \
71 "bootfile=/tftpboot/vmlinux.srec\0" \
72 "load=tftp 80500000 ${u-boot}\0" \
73 ""
74
75 #ifdef CONFIG_DBAU1550
76 /* Boot from flash by default, revert to bootp */
77 #define CONFIG_BOOTCOMMAND "bootm 0xbfc20000; bootp; bootm"
78 #else /* CONFIG_DBAU1550 */
79 #define CONFIG_BOOTCOMMAND "bootp;bootm"
80 #endif /* CONFIG_DBAU1550 */
81
82
83 /*
84 * BOOTP options
85 */
86 #define CONFIG_BOOTP_BOOTFILESIZE
87 #define CONFIG_BOOTP_BOOTPATH
88 #define CONFIG_BOOTP_GATEWAY
89 #define CONFIG_BOOTP_HOSTNAME
90
91
92 /*
93 * Command line configuration.
94 */
95 #include <config_cmd_default.h>
96
97 #undef CONFIG_CMD_BDI
98 #undef CONFIG_CMD_BEDBUG
99 #undef CONFIG_CMD_ELF
100 #undef CONFIG_CMD_ENV
101 #undef CONFIG_CMD_FAT
102 #undef CONFIG_CMD_FPGA
103 #undef CONFIG_CMD_MII
104 #undef CONFIG_CMD_RUN
105
106
107 #ifdef CONFIG_DBAU1550
108
109 #define CONFIG_CMD_FLASH
110 #define CONFIG_CMD_LOADB
111 #define CONFIG_CMD_NET
112
113 #undef CONFIG_CMD_I2C
114 #undef CONFIG_CMD_IDE
115 #undef CONFIG_CMD_NFS
116 #undef CONFIG_CMD_PCMCIA
117
118 #else
119
120 #define CONFIG_CMD_IDE
121 #define CONFIG_CMD_DHCP
122
123 #undef CONFIG_CMD_FLASH
124 #undef CONFIG_CMD_LOADB
125 #undef CONFIG_CMD_LOADS
126
127 #endif
128
129
130 /*
131 * Miscellaneous configurable options
132 */
133 #define CONFIG_SYS_LONGHELP /* undef to save memory */
134
135 #define CONFIG_SYS_PROMPT "DbAu1xx0 # " /* Monitor Command Prompt */
136
137 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
138 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
139 #define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
140
141 #define CONFIG_SYS_MALLOC_LEN 128*1024
142
143 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
144
145 #define CONFIG_SYS_MHZ 396
146
147 #if (CONFIG_SYS_MHZ % 12) != 0
148 #error "Invalid CPU frequency - must be multiple of 12!"
149 #endif
150
151 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
152
153 #define CONFIG_SYS_HZ 1000
154
155 #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
156
157 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
158
159 #define CONFIG_SYS_MEMTEST_START 0x80100000
160 #define CONFIG_SYS_MEMTEST_END 0x80800000
161
162 /*-----------------------------------------------------------------------
163 * FLASH and environment organization
164 */
165 #ifdef CONFIG_DBAU1550
166
167 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
168 #define CONFIG_SYS_MAX_FLASH_SECT (512) /* max number of sectors on one chip */
169
170 #define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */
171 #define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */
172
173 #else /* CONFIG_DBAU1550 */
174
175 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
176 #define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
177
178 #define PHYS_FLASH_1 0xbec00000 /* Flash Bank #1 */
179 #define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */
180
181 #endif /* CONFIG_DBAU1550 */
182
183 #define CONFIG_SYS_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
184
185 #define CONFIG_SYS_FLASH_CFI 1
186 #define CONFIG_FLASH_CFI_DRIVER 1
187
188 /* The following #defines are needed to get flash environment right */
189 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE
190 #define CONFIG_SYS_MONITOR_LEN (192 << 10)
191
192 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000
193
194 /* We boot from this flash, selected with dip switch */
195 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_2
196
197 /* timeout values are in ticks */
198 #define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
199 #define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
200
201 #define CONFIG_ENV_IS_NOWHERE 1
202
203 /* Address and size of Primary Environment Sector */
204 #define CONFIG_ENV_ADDR 0xB0030000
205 #define CONFIG_ENV_SIZE 0x10000
206
207 #define CONFIG_FLASH_16BIT
208
209 #define CONFIG_NR_DRAM_BANKS 2
210
211 #define CONFIG_NET_MULTI
212
213 #ifdef CONFIG_DBAU1550
214 #define MEM_SIZE 192
215 #else
216 #define MEM_SIZE 64
217 #endif
218
219 #define CONFIG_MEMSIZE_IN_BYTES
220
221 #ifndef CONFIG_DBAU1550
222 /*---ATA PCMCIA ------------------------------------*/
223 #define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
224 #define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
225 #define CONFIG_PCMCIA_SLOT_A
226
227 #define CONFIG_ATAPI 1
228 #define CONFIG_MAC_PARTITION 1
229
230 /* We run CF in "true ide" mode or a harddrive via pcmcia */
231 #define CONFIG_IDE_PCMCIA 1
232
233 /* We only support one slot for now */
234 #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
235 #define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
236
237 #undef CONFIG_IDE_LED /* LED for ide not supported */
238 #undef CONFIG_IDE_RESET /* reset for ide not supported */
239
240 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
241
242 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
243
244 /* Offset for data I/O */
245 #define CONFIG_SYS_ATA_DATA_OFFSET 8
246
247 /* Offset for normal register accesses */
248 #define CONFIG_SYS_ATA_REG_OFFSET 0
249
250 /* Offset for alternate registers */
251 #define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
252 #endif /* CONFIG_DBAU1550 */
253
254 /*-----------------------------------------------------------------------
255 * Cache Configuration
256 */
257 #define CONFIG_SYS_DCACHE_SIZE 16384
258 #define CONFIG_SYS_ICACHE_SIZE 16384
259 #define CONFIG_SYS_CACHELINE_SIZE 32
260
261 #endif /* __CONFIG_H */