include/configs/hcu5.h

   1 /*
   2  * (C) Copyright 2007 Netstal Maschinen AG
   3  * Niklaus Giger (Niklaus.Giger@netstal.com)
   4  *
   5  * (C) Copyright 2006-2007
   6  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   7  *
   8  * (C) Copyright 2006
   9  * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
  10  * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License as
  14  * published by the Free Software Foundation; either version 2 of
  15  * the License, or (at your option) any later version.
  16  *
  17  * This program is distributed in the hope that it will be useful,
  18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  20  * GNU General Public License for more details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  25  * MA 02111-1307 USA
  26  */
  27
  28 /************************************************************************
  29  * hcu5.h - configuration for HCU5 board (derived from sequoia.h)
  30  ***********************************************************************/
  31
  32 #ifndef __CONFIG_H
  33 #define __CONFIG_H
  34
  35 /*-----------------------------------------------------------------------
  36  * High Level Configuration Options
  37  *----------------------------------------------------------------------*/
  38 #define CONFIG_HCU5             1               /* Board is HCU5        */
  39 #define CONFIG_440EPX           1               /* Specific PPC440EPx   */
  40 #define CONFIG_440              1               /* ... PPC440 family    */
  41 #define CONFIG_4xx              1               /* ... PPC4xx family    */
  42 #define CONFIG_SYS_CLK_FREQ     33333333        /* external freq to pll */
  43
  44 #define CONFIG_BOARD_EARLY_INIT_F 1             /* Call board_early_init_f */
  45 #define CONFIG_MISC_INIT_R      1               /* Call misc_init_r     */
  46
  47 /*-----------------------------------------------------------------------
  48  * Base addresses -- Note these are effective addresses where the
  49  * actual resources get mapped (not physical addresses)
  50  *----------------------------------------------------------------------*/
  51 #define CONFIG_SYS_MONITOR_LEN  (320 * 1024)    /* Reserve 320 kB for Monitor   */
  52 #define CONFIG_SYS_MALLOC_LEN           (256 * 1024) /* Reserve 256 kB for malloc() */
  53
  54 #define CONFIG_SYS_TLB_FOR_BOOT_FLASH  3
  55 #define CONFIG_SYS_BOOT_BASE_ADDR       0xfff00000
  56 #define CONFIG_SYS_SDRAM_BASE           0x00000000      /* _must_ be 0          */
  57 #define CONFIG_SYS_FLASH_BASE           0xfff80000      /* start of FLASH       */
  58 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE
  59 #define CONFIG_SYS_OCM_BASE             0xe0010000      /* ocm                  */
  60 #define CONFIG_SYS_OCM_DATA_ADDR        CONFIG_SYS_OCM_BASE
  61 #define CONFIG_SYS_PCI_BASE             0xe0000000      /* Internal PCI regs    */
  62 #define CONFIG_SYS_PCI_MEMBASE          0x80000000      /* mapped pci memory    */
  63 #define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE  + 0x10000000
  64 #define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
  65 #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
  66
  67 /* Don't change either of these */
  68 #define CONFIG_SYS_PERIPHERAL_BASE      0xef600000      /* internal peripherals */
  69
  70 #define CONFIG_SYS_USB2D0_BASE          0xe0000100
  71 #define CONFIG_SYS_USB_DEVICE           0xe0000000
  72 #define CONFIG_SYS_USB_HOST             0xe0000400
  73
  74 /*-----------------------------------------------------------------------
  75  * Initial RAM & stack pointer
  76  *----------------------------------------------------------------------*/
  77 /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache     */
  78 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_BASE     /* OCM                  */
  79
  80 #define CONFIG_SYS_INIT_RAM_END (4 << 10)
  81 #define CONFIG_SYS_GBL_DATA_SIZE        256             /* num bytes initial data */
  82 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
  83 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_POST_WORD_ADDR
  84
  85 /*-----------------------------------------------------------------------
  86  * Serial Port
  87  *----------------------------------------------------------------------*/
  88 #undef CONFIG_SYS_EXT_SERIAL_CLOCK             /* external serial clock */
  89 #define CONFIG_BAUDRATE         9600
  90 #define CONFIG_SERIAL_MULTI     1
  91 /* needed to be able to define
  92         CONFIG_SERIAL_SOFTWARE_FIFO, but
  93         CONFIG_SERIAL_SOFTWARE_FIFO (16) does not work */
  94 /* Size (bytes) of interrupt driven serial port buffer.
  95  * Set to 0 to use polling instead of interrupts.
  96  * Setting to 0 will also disable RTS/CTS handshaking.
  97  */
  98 #undef CONFIG_SERIAL_SOFTWARE_FIFO
  99 #undef CONFIG_UART1_CONSOLE
 100
 101 #undef CONFIG_CMD_HWFLOW
 102 #define CONFIG_SYS_BAUDRATE_TABLE                                               \
 103         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 104
 105 /*-----------------------------------------------------------------------
 106  * Environment
 107  *----------------------------------------------------------------------*/
 108
 109 #undef  CONFIG_ENV_IS_IN_NVRAM
 110 #define  CONFIG_ENV_IS_IN_FLASH
 111 #undef  CONFIG_ENV_IS_IN_EEPROM
 112 #undef  CONFIG_ENV_IS_NOWHERE
 113
 114 #ifdef  CONFIG_ENV_IS_IN_EEPROM
 115 /* Put the environment after the SDRAM and bootstrap configuration */
 116 #define PROM_SIZE       2048
 117 #define CONFIG_SYS_BOOSTRAP_OPTION_OFFSET        512
 118 #define CONFIG_ENV_OFFSET        (CONFIG_SYS_BOOSTRAP_OPTION_OFFSET + 0x10)
 119 #define CONFIG_ENV_SIZE (PROM_SIZE-CONFIG_ENV_OFFSET)
 120 #endif
 121
 122 #ifdef CONFIG_ENV_IS_IN_FLASH
 123 /* Put the environment in Flash */
 124 #define CONFIG_ENV_SECT_SIZE    0x10000 /* size of one complete sector  */
 125 #define CONFIG_ENV_ADDR         ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
 126 #define CONFIG_ENV_SIZE         8*1024  /* 8 KB Environment Sector      */
 127
 128 /* Address and size of Redundant Environment Sector     */
 129 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 130 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 131
 132 #endif
 133
 134 /*-----------------------------------------------------------------------
 135  * DDR SDRAM
 136  *----------------------------------------------------------------------*/
 137 #define CONFIG_SYS_MBYTES_SDRAM        (128)            /* 128 MB or 256 MB     */
 138 #define CONFIG_SYS_DDR_CACHED_ADDR      0x50000000      /* setup 2nd TLB cached here */
 139 #undef  CONFIG_DDR_DATA_EYE             /* Do not use DDR2 optimization */
 140 #define CONFIG_DDR_ECC          1       /* enable ECC                   */
 141
 142 /* Following two definitions must be kept in sync with config.h of vxWorks */
 143 #define USER_RESERVED_MEM     (   0)  /* in kB */
 144 #define PM_RESERVED_MEM       (  64)  /* in kB: pmLib reserved area size */
 145 #define CONFIG_PRAM           ( USER_RESERVED_MEM + PM_RESERVED_MEM )
 146
 147 /*-----------------------------------------------------------------------
 148  * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the
 149  * the second internal I2C controller of the PPC440EPx
 150  *----------------------------------------------------------------------*/
 151 #define CONFIG_SYS_SPD_BUS_NUM  1
 152
 153 #define CONFIG_HARD_I2C 1       /* I2C with hardware support    */
 154 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged               */
 155 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address  */
 156 #define CONFIG_SYS_I2C_SLAVE            0x7F
 157
 158 /* This is the 7bit address of the device, not including P. */
 159 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
 160 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 161
 162 /* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
 163 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW     0x07
 164 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
 165 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 166 #undef CONFIG_SYS_I2C_MULTI_EEPROMS
 167
 168
 169 #define CONFIG_PREBOOT  "echo;"                                         \
 170         "echo Type \"run nfs\" to mount Linux root filesystem over NFS;"\
 171         "echo"
 172
 173 #undef  CONFIG_BOOTARGS
 174
 175 /* Setup some board specific values for the default environment variables */
 176 #define CONFIG_HOSTNAME         hcu5
 177 #define CONFIG_IPADDR           172.25.1.99
 178 #define CONFIG_ETHADDR  00:60:13:00:00:00 /* Netstal Machines AG MAC */
 179 #define CONFIG_OVERWRITE_ETHADDR_ONCE
 180 #define CONFIG_SERVERIP         172.25.1.3
 181
 182 #define CONFIG_SYS_TFTP_LOADADDR 0x01000000 /* @16 MB */
 183
 184 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 185         "netdev=eth0\0"                                                 \
 186         "loadaddr=0x01000000\0"                                         \
 187         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 188                 "nfsroot=${serverip}:${rootpath}\0"                     \
 189         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 190         "addip=setenv bootargs ${bootargs} "                            \
 191                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 192                 ":${hostname}:${netdev}:off panic=1\0"                  \
 193         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 194         "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"         \
 195                 "bootm\0"                                               \
 196                 "bootfile=hcu5/uImage\0"                                \
 197                 "rootpath=/home/hcu/eldk/ppc_4xxFP\0"                   \
 198                 "load=tftp 100000 hcu5/u-boot.bin\0"                    \
 199         "update=protect off FFFB0000 FFFFFFFF;era FFFB0000 FFFFFFFF;"   \
 200                 "cp.b 100000 FFFB0000 50000\0"                          \
 201         "upd=run load update\0"                                         \
 202         "vx_rom=hcu5/hcu5_vx_rom\0"                                     \
 203         "vx=tftp ${loadaddr} ${vx_rom};run vxargs; bootvx\0"            \
 204         "vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}"       \
 205         " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0"        \
 206         "usbargs=setenv bootargs root=/dev/sda1 ro\0"                   \
 207         "linux=usb start; ext2load usb 0 ${loadaddr} /boot/uImage;"     \
 208         "run usbargs addip addtty; bootm\0"                             \
 209         "net_nfs_fdt=tftp 200000 ${bootfile};"                          \
 210                 "tftp ${fdt_addr} ${fdt_file};"                         \
 211                 "run nfsargs addip addtty;"                             \
 212                 "bootm 200000 - ${fdt_addr}\0"                          \
 213                 "fdt_file=hcu5/hcu5.dtb\0"                              \
 214         "fdt_addr=400000\0"                                             \
 215         ""
 216 #define CONFIG_BOOTCOMMAND      "run vx"
 217
 218 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
 219
 220 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 221 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change        */
 222
 223 #define CONFIG_M88E1111_PHY     1
 224 #define CONFIG_IBM_EMAC4_V4     1
 225 #define CONFIG_MII              1       /* MII PHY management           */
 226 #define CONFIG_PHY_ADDR 1       /* PHY address, like on HCU4    */
 227
 228 #define CONFIG_PHY_RESET       1        /* reset phy upon startup         */
 229
 230 #define CONFIG_HAS_ETH0
 231 #define CONFIG_SYS_RX_ETH_BUFFER        32 /* Number of ethernet rx buffers & desc. */
 232
 233 #define CONFIG_NET_MULTI        1
 234 #define CONFIG_HAS_ETH1 1       /* add support for "eth1addr" */
 235 #define CONFIG_PHY1_ADDR        2
 236
 237 /* USB */
 238 #define CONFIG_USB_OHCI
 239 #define CONFIG_USB_STORAGE
 240
 241 /* Comment this out to enable USB 1.1 device */
 242 #define USB_2_0_DEVICE
 243
 244 /* Partitions */
 245 #define CONFIG_MAC_PARTITION
 246 #define CONFIG_DOS_PARTITION
 247 #define CONFIG_ISO_PARTITION
 248
 249 /*
 250  * BOOTP options
 251  */
 252 #define CONFIG_BOOTP_BOOTFILESIZE
 253 #define CONFIG_BOOTP_BOOTPATH
 254 #define CONFIG_BOOTP_GATEWAY
 255 #define CONFIG_BOOTP_HOSTNAME
 256
 257 /*
 258  * Command line configuration.
 259  */
 260 #include <config_cmd_default.h>
 261
 262 #define CONFIG_CMD_ASKENV
 263 #define CONFIG_CMD_DHCP
 264 #define CONFIG_CMD_DIAG
 265 #define CONFIG_CMD_EEPROM
 266 #define CONFIG_CMD_ELF
 267 #define CONFIG_CMD_FLASH
 268 #define CONFIG_CMD_FAT
 269 #define CONFIG_CMD_I2C
 270 #define CONFIG_CMD_IMMAP
 271 #define CONFIG_CMD_IRQ
 272 #define CONFIG_CMD_MII
 273 #define CONFIG_CMD_NET
 274 #define CONFIG_CMD_NFS
 275 #define CONFIG_CMD_PING
 276 #define CONFIG_CMD_REGINFO
 277 #define CONFIG_CMD_SDRAM
 278 #define CONFIG_CMD_USB
 279
 280 /* POST support */
 281 #define CONFIG_POST             (CONFIG_SYS_POST_MEMORY   | \
 282                                  CONFIG_SYS_POST_CPU       | \
 283                                  CONFIG_SYS_POST_UART      | \
 284                                  CONFIG_SYS_POST_I2C       | \
 285                                  CONFIG_SYS_POST_CACHE     | \
 286                                  CONFIG_SYS_POST_FPU       | \
 287                                  CONFIG_SYS_POST_ETHER     | \
 288                                  CONFIG_SYS_POST_SPR)
 289 #define CONFIG_SYS_POST_UART_TABLE      {UART0_BASE}
 290
 291 #define CONFIG_SYS_POST_WORD_ADDR       (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 292 #define CONFIG_SYS_POST_CACHE_ADDR      0x7fff0000 /* free virtual address      */
 293 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 294
 295 #define CONFIG_SUPPORT_VFAT
 296
 297 /*-----------------------------------------------------------------------
 298  * Miscellaneous configurable options
 299  *----------------------------------------------------------------------*/
 300 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 301 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt       */
 302 #if defined(CONFIG_CMD_KGDB)
 303 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
 304 #else
 305 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size      */
 306 #endif
 307 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 308 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 309 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size  */
 310
 311 #define CONFIG_SYS_MEMTEST_START        0x0400000 /* memtest works on           */
 312 #define CONFIG_SYS_MEMTEST_END  0x0C00000 /* 4 ... 12 MB in DRAM        */
 313
 314 #define CONFIG_SYS_LOAD_ADDR            0x100000  /* default load address       */
 315 #define CONFIG_SYS_EXTBDINFO            1       /* To use extended board_into (bd_t) */
 316
 317 #define CONFIG_SYS_HZ                   1000    /* decrementer freq: 1 ms ticks */
 318
 319 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 320 #define CONFIG_LOOPW            1       /* enable loopw command         */
 321 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 322 #define CONFIG_VERSION_VARIABLE 1       /* include version env variable */
 323
 324 /*-----------------------------------------------------------------------
 325  * PCI stuff
 326  *----------------------------------------------------------------------*/
 327 /* General PCI */
 328 #define CONFIG_PCI              1       /* include pci support          */
 329 #undef CONFIG_PCI_PNP                   /* do (not) pci plug-and-play   */
 330 #undef CONFIG_PCI_SCAN_SHOW             /* show pci devices on startup  */
 331 #define CONFIG_SYS_PCI_TARGBASE        0x80000000 /* PCIaddr map to CONFIG_SYS_PCI_MEMBASE*/
 332
 333 /* Board-specific PCI */
 334 #define CONFIG_SYS_PCI_TARGET_INIT
 335 #define CONFIG_SYS_PCI_MASTER_INIT
 336
 337 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8   /* AMCC                         */
 338 #define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe   /* Whatever                     */
 339
 340 /*
 341  * For booting Linux, the board info and command line data
 342  * have to be in the first 8 MB of memory, since this is
 343  * the maximum mapped by the Linux kernel during initialization.
 344  */
 345 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20) /* Initial Memory map for Linux */
 346
 347 /*-----------------------------------------------------------------------
 348  * Flash
 349  *----------------------------------------------------------------------*/
 350
 351 /* Use common CFI driver */
 352 #define CONFIG_SYS_FLASH_CFI
 353 #define CONFIG_FLASH_CFI_DRIVER
 354 /* board provides its own flash_init code */
 355 #define CONFIG_FLASH_CFI_LEGACY         1
 356 #define CONFIG_SYS_FLASH_CFI_WIDTH              FLASH_CFI_8BIT
 357 #define CONFIG_SYS_FLASH_LEGACY_512Kx8 1
 358
 359 /* print 'E' for empty sector on flinfo */
 360 #define CONFIG_SYS_FLASH_EMPTY_INFO
 361
 362 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 363 #define CONFIG_SYS_MAX_FLASH_SECT       8       /* max number of sectors on one chip */
 364
 365 /*-----------------------------------------------------------------------
 366  * External Bus Controller (EBC) Setup
 367  *----------------------------------------------------------------------*/
 368 #define CONFIG_SYS_FLASH                CONFIG_SYS_FLASH_BASE
 369 #define CONFIG_SYS_CS_1         0xC8000000 /* CAN */
 370 #define CONFIG_SYS_CS_2         0xCC000000 /* CPLD and IMC-Bus Standard */
 371 #define CONFIG_SYS_CPLD         CONFIG_SYS_CS_2
 372 #define CONFIG_SYS_CS_3         0xCE000000 /* CPLD and IMC-Bus Fast  */
 373
 374 #define CONFIG_SYS_BOOTFLASH_CS 0       /* Boot Flash chip connected to CSx */
 375 #define CONFIG_SYS_EBC_PB0AP            0x02005400
 376 #define CONFIG_SYS_EBC_PB0CR            0xFFF18000 /* (CONFIG_SYS_FLASH | 0xda000)  */
 377 #define FLASH_BASE0_PRELIM      CONFIG_SYS_FLASH_BASE   /* FLASH bank #0        */
 378
 379 /* Memory Bank 1 CAN-Chips initialization                               */
 380 #define CONFIG_SYS_EBC_PB1AP            0x02054500
 381 #define CONFIG_SYS_EBC_PB1CR            0xC8018000
 382
 383 /* Memory Bank 2 CPLD/IMC-Bus standard initialization                   */
 384 #define CONFIG_SYS_EBC_PB2AP            0x01840300
 385 #define CONFIG_SYS_EBC_PB2CR            0xCC0BA000
 386
 387 /* Memory Bank 3 IMC-Bus fast mode initialization                       */
 388 #define CONFIG_SYS_EBC_PB3AP            0x01800300
 389 #define CONFIG_SYS_EBC_PB3CR            0xCE0BA000
 390
 391 /* Memory Bank 4 (not used) initialization                              */
 392 #undef CONFIG_SYS_EBC_PB4AP
 393 #undef CONFIG_SYS_EBC_PB4CR
 394
 395 /* Memory Bank 5 (not used) initialization                              */
 396 #undef CONFIG_SYS_EBC_PB5AP
 397 #undef CONFIG_SYS_EBC_PB5CR
 398
 399 #define HCU_CPLD_VERSION_REGISTER ( CONFIG_SYS_CPLD + 0x0F00000 )
 400 #define HCU_HW_VERSION_REGISTER   ( CONFIG_SYS_CPLD + 0x1400000 )
 401
 402 #define CONFIG_SYS_HUSH_PARSER                 /* use "hush" command parser    */
 403 #ifdef  CONFIG_SYS_HUSH_PARSER
 404         #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 405 #endif
 406
 407 #if defined(CONFIG_CMD_KGDB)
 408 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 409 #define CONFIG_KGDB_SER_INDEX   2           /* which serial port to use */
 410 #endif
 411
 412 /* pass open firmware flat tree */
 413 #define CONFIG_OF_LIBFDT        1
 414 #define CONFIG_OF_BOARD_SETUP   1
 415
 416 #endif  /* __CONFIG_H */