include/configs/highbank.h

   1 /*
   2  * Copyright 2010-2011 Calxeda, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_SYS_DCACHE_OFF
  11
  12 #define CONFIG_SYS_BOOTMAPSZ            (16 << 20)
  13
  14 #define CONFIG_SYS_TIMER_RATE           (150000000/256)
  15 #define CONFIG_SYS_TIMER_COUNTER        (0xFFF34000 + 0x4)
  16 #define CONFIG_SYS_TIMER_COUNTS_DOWN
  17
  18 /*
  19  * Size of malloc() pool
  20  */
  21 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024)
  22
  23 #define CONFIG_PL011_CLOCK              150000000
  24 #define CONFIG_PL01x_PORTS              { (void *)(0xFFF36000) }
  25 #define CONFIG_CONS_INDEX               0
  26
  27 #define CONFIG_SYS_BOOTCOUNT_LE         /* Use little-endian accessors */
  28
  29 #define CONFIG_MISC_INIT_R
  30 #define CONFIG_SCSI_AHCI_PLAT
  31 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     5
  32 #define CONFIG_SYS_SCSI_MAX_LUN         1
  33 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  34                                         CONFIG_SYS_SCSI_MAX_LUN)
  35
  36 #define CONFIG_CALXEDA_XGMAC
  37
  38 /*
  39  * Command line configuration.
  40  */
  41
  42 #define CONFIG_BOOT_RETRY_TIME          -1
  43 #define CONFIG_RESET_TO_RETRY
  44
  45 /*
  46  * Miscellaneous configurable options
  47  */
  48 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  49 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  50
  51 #define CONFIG_SYS_LOAD_ADDR            0x800000
  52 #define CONFIG_SYS_64BIT_LBA
  53
  54 /*-----------------------------------------------------------------------
  55  * Physical Memory Map
  56  * The DRAM is already setup, so do not touch the DT node later.
  57  */
  58 #define CONFIG_NR_DRAM_BANKS            0
  59 #define PHYS_SDRAM_1_SIZE               (4089 << 20)
  60 #define CONFIG_SYS_MEMTEST_START        0x100000
  61 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_1_SIZE - 0x100000)
  62
  63 /* Environment data setup
  64 */
  65 #define CONFIG_SYS_NVRAM_BASE_ADDR      0xfff88000      /* NVRAM base address */
  66 #define CONFIG_SYS_NVRAM_SIZE           0x8000          /* NVRAM size */
  67 #define CONFIG_ENV_SIZE                 0x2000          /* Size of Environ */
  68 #define CONFIG_ENV_ADDR                 CONFIG_SYS_NVRAM_BASE_ADDR
  69
  70 #define CONFIG_SYS_SDRAM_BASE           0x00000000
  71 #define CONFIG_SYS_INIT_SP_ADDR         0x01000000
  72 #define CONFIG_SKIP_LOWLEVEL_INIT
  73
  74 #endif