include/configs/openrd.h

   1 /*
   2  * (C) Copyright 2009
   3  * Net Insight <www.netinsight.net>
   4  * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
   5  *
   6  * Based on sheevaplug.h:
   7  * (C) Copyright 2009
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef _CONFIG_OPENRD_H
  15 #define _CONFIG_OPENRD_H
  16
  17 /*
  18  * Version number information
  19  */
  20 #ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
  21 # define CONFIG_IDENT_STRING    "\nOpenRD-Ultimate"
  22 #else
  23 # ifdef CONFIG_BOARD_IS_OPENRD_CLIENT
  24 #  define CONFIG_IDENT_STRING   "\nOpenRD-Client"
  25 # else
  26 #  ifdef CONFIG_BOARD_IS_OPENRD_BASE
  27 #   define CONFIG_IDENT_STRING  "\nOpenRD-Base"
  28 #  else
  29 #   error Unknown OpenRD board specified
  30 #  endif
  31 # endif
  32 #endif
  33
  34 /*
  35  * High Level Configuration Options (easy to change)
  36  */
  37 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  38 #define CONFIG_KIRKWOOD         1       /* SOC Family Name */
  39 #define CONFIG_KW88F6281        1       /* SOC Name */
  40 #define CONFIG_MACH_OPENRD_BASE /* Machine type */
  41 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  42
  43 /*
  44  * Commands configuration
  45  */
  46 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  47 #define CONFIG_SYS_MVFS
  48 #include <config_cmd_default.h>
  49 #define CONFIG_CMD_DHCP
  50 #define CONFIG_CMD_ENV
  51 #define CONFIG_CMD_MII
  52 #define CONFIG_CMD_NAND
  53 #define CONFIG_CMD_PING
  54 #define CONFIG_CMD_USB
  55 #define CONFIG_CMD_IDE
  56
  57 /*
  58  * mv-common.h should be defined after CMD configs since it used them
  59  * to enable certain macros
  60  */
  61 #include "mv-common.h"
  62
  63 /*
  64  *  Environment variables configurations
  65  */
  66 #ifdef CONFIG_CMD_NAND
  67 #define CONFIG_ENV_IS_IN_NAND           1
  68 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  69 #else
  70 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  71 #endif
  72 /*
  73  * max 4k env size is enough, but in case of nand
  74  * it has to be rounded to sector size
  75  */
  76 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  77 #define CONFIG_ENV_ADDR                 0x60000
  78 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  79
  80 /*
  81  * Default environment variables
  82  */
  83 #define CONFIG_BOOTCOMMAND              "${x_bootcmd_kernel}; " \
  84         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  85         "${x_bootcmd_usb}; bootm 0x6400000;"
  86
  87 #define MTDIDS_DEFAULT          "nand0=nand_mtd"
  88 #define MTDPARTS_DEFAULT        "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
  89         "0x400000@0x100000(uImage),"\
  90         "0x1fb00000@0x500000(rootfs)"
  91
  92 #define CONFIG_EXTRA_ENV_SETTINGS       "x_bootargs=console"            \
  93         "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0"         \
  94         "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"      \
  95         "x_bootcmd_usb=usb start\0"                                     \
  96         "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"           \
  97         "mtdids="MTDIDS_DEFAULT"\0"                                     \
  98         "mtdparts="MTDPARTS_DEFAULT"\0"
  99
 100 /*
 101  * Ethernet Driver configuration
 102  */
 103 #ifdef CONFIG_CMD_NET
 104 # ifdef CONFIG_BOARD_IS_OPENRD_BASE
 105 #  define CONFIG_MVGBE_PORTS    {1, 0}  /* enable port 0 only */
 106 # else
 107 #  define CONFIG_MVGBE_PORTS    {1, 1}  /* enable both ports */
 108 # endif
 109 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
 110 #  define CONFIG_PHY_BASE_ADR   0x0
 111 #  define PHY_NO                "88E1121"
 112 # else
 113 #  define CONFIG_PHY_BASE_ADR   0x8
 114 #  define PHY_NO                "88E1116"
 115 # endif
 116 #endif /* CONFIG_CMD_NET */
 117
 118 /*
 119  * SATA Driver configuration
 120  */
 121 #ifdef CONFIG_MVSATA_IDE
 122 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 123 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
 124 #endif /*CONFIG_MVSATA_IDE*/
 125
 126 #endif /* _CONFIG_OPENRD_BASE_H */