include/configs/pcm058.h

   1 /*
   2  * Copyright (C) Stefano Babic <sbabic@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7
   8 #ifndef __PCM058_CONFIG_H
   9 #define __PCM058_CONFIG_H
  10
  11 #include <config_distro_defaults.h>
  12
  13 #ifdef CONFIG_SPL
  14 #define CONFIG_SPL_YMODEM_SUPPORT
  15 #define CONFIG_SPL_SPI_SUPPORT
  16 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  17 #define CONFIG_SPL_SPI_LOAD
  18 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
  19 #include "imx6_spl.h"
  20 #endif
  21
  22 #include "mx6_common.h"
  23
  24 /* Thermal */
  25 #define CONFIG_IMX_THERMAL
  26
  27 /* Serial */
  28 #define CONFIG_MXC_UART
  29 #define CONFIG_MXC_UART_BASE           UART2_BASE
  30 #define CONFIG_CONSOLE_DEV              "ttymxc1"
  31
  32 #define PHYS_SDRAM_SIZE         (1u * 1024 * 1024 * 1024)
  33
  34 /* Early setup */
  35 #define CONFIG_BOARD_EARLY_INIT_F
  36 #define CONFIG_BOARD_LATE_INIT
  37 #define CONFIG_DISPLAY_BOARDINFO_LATE
  38
  39
  40 /* Size of malloc() pool */
  41 #define CONFIG_SYS_MALLOC_LEN           (8 * SZ_1M)
  42
  43 /* Ethernet */
  44 #define CONFIG_FEC_MXC
  45 #define CONFIG_MII
  46 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  47 #define CONFIG_FEC_XCV_TYPE             RGMII
  48 #define CONFIG_ETHPRIME                 "FEC"
  49 #define CONFIG_FEC_MXC_PHYADDR          3
  50
  51 #define CONFIG_PHYLIB
  52 #define CONFIG_PHY_MICREL
  53 #define CONFIG_PHY_KSZ9031
  54
  55 /* SPI Flash */
  56 #define CONFIG_MXC_SPI
  57 #define CONFIG_SF_DEFAULT_BUS           0
  58 #define CONFIG_SF_DEFAULT_CS            0
  59 #define CONFIG_SF_DEFAULT_SPEED         20000000
  60 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  61
  62 /* I2C Configs */
  63 #define CONFIG_SYS_I2C
  64 #define CONFIG_SYS_I2C_MXC
  65 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 2 */
  66 #define CONFIG_SYS_I2C_SPEED              100000
  67
  68 #ifndef CONFIG_SPL_BUILD
  69 #define CONFIG_CMD_NAND
  70 /* Enable NAND support */
  71 #define CONFIG_CMD_NAND_TRIMFFS
  72 #define CONFIG_NAND_MXS
  73 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  74 #define CONFIG_SYS_NAND_BASE            0x40000000
  75 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  76 #define CONFIG_SYS_NAND_ONFI_DETECTION
  77 #endif
  78
  79 /* DMA stuff, needed for GPMI/MXS NAND support */
  80 #define CONFIG_APBH_DMA
  81 #define CONFIG_APBH_DMA_BURST
  82 #define CONFIG_APBH_DMA_BURST8
  83
  84 /* Filesystem support */
  85 #define CONFIG_LZO
  86 #define CONFIG_CMD_UBIFS
  87 #define CONFIG_CMD_MTDPARTS
  88 #define CONFIG_MTD_PARTITIONS
  89 #define CONFIG_MTD_DEVICE
  90 #define MTDIDS_DEFAULT    "nand0=nand"
  91 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
  92
  93 /* Various command support */
  94 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
  95 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
  96 #define CONFIG_CMD_GSC
  97 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
  98 #define CONFIG_CMD_UBI
  99 #define CONFIG_RBTREE
 100
 101 /* Physical Memory Map */
 102 #define CONFIG_NR_DRAM_BANKS           1
 103 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 104
 105 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 106 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 107 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 108
 109 #define CONFIG_SYS_INIT_SP_OFFSET \
 110         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 111 #define CONFIG_SYS_INIT_SP_ADDR \
 112         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 113
 114 /* MMC Configs */
 115 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 116 #define CONFIG_SYS_FSL_USDHC_NUM        1
 117
 118 /* Environment organization */
 119 #define CONFIG_ENV_IS_IN_SPI_FLASH
 120 #define CONFIG_ENV_SIZE                (16 * 1024)
 121 #define CONFIG_ENV_OFFSET               (1024 * SZ_1K)
 122 #define CONFIG_ENV_SECT_SIZE            (64 * SZ_1K)
 123 #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 124 #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 125 #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 126 #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 127 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 128 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
 129                                                 CONFIG_ENV_SECT_SIZE)
 130 #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 131
 132 #ifdef CONFIG_ENV_IS_IN_NAND
 133 #define CONFIG_ENV_OFFSET              (0x1E0000)
 134 #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 135 #endif
 136
 137 #endif