]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/platinum.h
e34cf3dfe6321e46db5c2e837b62372ce400bfaf
[people/ms/u-boot.git] / include / configs / platinum.h
1 /*
2 * Copyright (C) 2014, Barco (www.barco.com)
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef __PLATINUM_CONFIG_H__
8 #define __PLATINUM_CONFIG_H__
9
10 /* SPL */
11
12 /* Location in NAND to read U-Boot from */
13 #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
14
15 #include "imx6_spl.h" /* common IMX6 SPL configuration */
16 #include "mx6_common.h"
17
18 /*
19 * Console configuration
20 */
21
22 #define CONFIG_CMD_BMODE
23 #define CONFIG_CMD_MTDPARTS
24 #define CONFIG_CMD_NAND
25 #define CONFIG_CMD_NAND_TRIMFFS
26 #define CONFIG_CMD_UBI
27 #define CONFIG_CMD_UBIFS
28
29 /*
30 * Hardware configuration
31 */
32
33 /* UART config */
34 #define CONFIG_MXC_UART
35 #define CONFIG_MXC_UART_BASE UART1_BASE
36
37 /* I2C config */
38 #define CONFIG_SYS_I2C
39 #define CONFIG_SYS_I2C_MXC
40 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
41 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
42 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
43 #define CONFIG_SYS_I2C_SPEED 100000
44
45 /* MMC config */
46 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
47 #define CONFIG_SYS_FSL_USDHC_NUM 1
48
49 /* Ethernet config */
50 #define CONFIG_FEC_MXC
51 #define CONFIG_MII
52 #define IMX_FEC_BASE ENET_BASE_ADDR
53
54 #define CONFIG_PHYLIB
55
56 /* USB config */
57 #define CONFIG_USB_EHCI
58 #define CONFIG_USB_EHCI_MX6
59 #define CONFIG_MXC_USB_PORT 1
60 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
61 #define CONFIG_MXC_USB_FLAGS 0
62
63 /* Memory config */
64 #define CONFIG_NR_DRAM_BANKS 1
65 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
66 #ifndef PHYS_SDRAM_SIZE
67 #define PHYS_SDRAM_SIZE (1024 << 20)
68 #endif
69
70 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
71 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
72 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
73
74 #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
75 GENERATED_GBL_DATA_SIZE)
76 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
77 CONFIG_SYS_INIT_SP_OFFSET)
78
79 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
80
81 #ifdef CONFIG_CMD_NAND
82
83 /* NAND config */
84 #define CONFIG_NAND_MXS
85 #ifndef CONFIG_SYS_NAND_MAX_CHIPS
86 #define CONFIG_SYS_NAND_MAX_CHIPS 2
87 #endif
88 #define CONFIG_SYS_MAX_NAND_DEVICE 1
89 #define CONFIG_SYS_NAND_BASE 0x40000000
90 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
91 #define CONFIG_SYS_NAND_ONFI_DETECTION
92
93 /* DMA config, needed for GPMI/MXS NAND support */
94 #define CONFIG_APBH_DMA
95 #define CONFIG_APBH_DMA_BURST
96 #define CONFIG_APBH_DMA_BURST8
97
98 /* Environment in NAND */
99 #define CONFIG_ENV_IS_IN_NAND
100 #define CONFIG_ENV_OFFSET (16 << 20)
101 #define CONFIG_ENV_SECT_SIZE (128 << 10)
102 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
103 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
104 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
105
106 #else /* CONFIG_CMD_NAND */
107
108 /* Environment in MMC */
109 #define CONFIG_ENV_SIZE (8 << 10)
110 #define CONFIG_ENV_IS_IN_MMC
111 #define CONFIG_ENV_OFFSET (6 * 64 * 1024)
112 #define CONFIG_SYS_MMC_ENV_DEV 0
113
114 #endif /* CONFIG_CMD_NAND */
115
116 /*
117 * U-Boot configuration
118 */
119
120 /* Board startup config */
121 #define CONFIG_BOARD_EARLY_INIT_F
122 #define CONFIG_MISC_INIT_R
123
124 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
125 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
126 PHYS_SDRAM_SIZE - (12 << 20))
127
128 #define CONFIG_BOOTCOMMAND "run bootubi_scr"
129
130 /* Miscellaneous configurable options */
131 #define CONFIG_PREBOOT
132
133 /* Print Buffer Size */
134 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
135 sizeof(CONFIG_SYS_PROMPT) + 16)
136
137 /* MTD/UBI/UBIFS config */
138 #define CONFIG_LZO
139 #define CONFIG_MTD_DEVICE
140 #define CONFIG_MTD_PARTITIONS
141 #define CONFIG_RBTREE
142
143 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
144 #define MTDIDS_DEFAULT "nand0=gpmi-nand"
145 #define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
146 "512k(env1),512k(env2),-(ubi)"
147 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
148 #define MTDIDS_DEFAULT "nand0=gpmi-nand"
149 #define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
150 "512k(env1),512k(env2),495M(ubi0)," \
151 "14M(res0),2M(res1)," \
152 "512k(res2),512k(res3),-(ubi1)"
153 #endif
154
155 /*
156 * Environment configuration
157 */
158
159 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
160 #define CONFIG_COMMON_ENV_UBI \
161 "setubipartition=env set ubipartition ubi\0" \
162 "setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
163 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
164 #define CONFIG_COMMON_ENV_UBI \
165 "setubipartition=env set ubipartition ubi$boot_vol\0" \
166 "setubirfs=env set ubirfs ubi0:rootfs\0"
167 #endif
168
169 #define CONFIG_COMMON_ENV_MISC \
170 "user=user\0" \
171 "project="CONFIG_PLATINUM_PROJECT"\0" \
172 "uimage=uImage\0" \
173 "dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
174 "serverip=serverip\0" \
175 "memaddrlinux=0x10800000\0" \
176 "memaddrsrc=0x11000000\0" \
177 "memaddrdtb=0x12000000\0" \
178 "console=ttymxc0\0" \
179 "baudrate=115200\0" \
180 "boot_scr=boot.uboot\0" \
181 "boot_vol=0\0" \
182 "mtdids="MTDIDS_DEFAULT"\0" \
183 "mtdparts="MTDPARTS_DEFAULT"\0" \
184 "mmcfs=ext2\0" \
185 "mmcrootpart=1\0" \
186 \
187 "setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
188 "settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
189 "settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
190 "setubifilelinux=env set ubifilelinux boot/$uimage\0" \
191 "setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
192 "setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
193 "setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
194 "setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
195 \
196 "loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
197 "loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
198 "loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
199 "loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
200 "loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
201 "$mmcfilelinux\0" \
202 "loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
203 "$mmcfiledtb\0" \
204 \
205 "ubipart=ubi part $ubipartition\0" \
206 "ubimount=ubifsmount $ubirfs\0" \
207 \
208 "setbootargscommon=env set bootargs $bootargs " \
209 "console=$console,$baudrate enable_wait_mode=off\0" \
210 "setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
211 "setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
212 "setbootargsubirfs=env set bootargs $bootargs " \
213 "ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
214 "setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
215 "nfsroot=$serverip:$nfspath,v3,tcp\0" \
216 "setbootargsmmcrfs=env set bootargs $bootargs " \
217 "root=$mmcrootdev rootwait rw\0" \
218 \
219 "bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
220 "setbootargscommon setbootargsmtd setbootargsdhcp " \
221 "setbootargsnfsrfs;" \
222 "run loadtftpkernel loadtftpdtb;" \
223 "bootm $memaddrlinux - $memaddrdtb\0" \
224 "bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
225 "run setubipartition setubirfs;" \
226 "run setbootargscommon setbootargsmtd " \
227 "setbootargsubirfs;" \
228 "run loadtftpkernel loadtftpdtb;" \
229 "bootm $memaddrlinux - $memaddrdtb\0" \
230 "bootubi=run setubipartition setubirfs setubifilelinux " \
231 "setubipfiledtb;" \
232 "run setbootargscommon setbootargsmtd " \
233 "setbootargsubirfs;" \
234 "run ubipart ubimount loadubikernel loadubidtb;" \
235 "bootm $memaddrlinux - $memaddrdtb\0" \
236 "bootubi_scr=run setubipartition setubirfs;" \
237 "run ubipart ubimount;" \
238 "if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
239 "then source ${memaddrsrc}; else run bootubi; fi\0" \
240 "bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
241 "setbootargscommon setbootargsmmcrfs;" \
242 "run loadmmckernel loadmmcdtb;" \
243 "bootm $memaddrlinux - $memaddrdtb\0" \
244 \
245 "bootcmd="CONFIG_BOOTCOMMAND"\0"
246
247 #define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
248 CONFIG_COMMON_ENV_UBI
249 #endif /* __PLATINUM_CONFIG_H__ */