include/configs/pogo_e02.h

   1 /*
   2  * Copyright (C) 2012
   3  * David Purdy <david.c.purdy@gmail.com>
   4  *
   5  * Based on Kirkwood support:
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _CONFIG_POGO_E02_H
  14 #define _CONFIG_POGO_E02_H
  15
  16
  17 /*
  18  * Machine type definition and ID
  19  */
  20 #define MACH_TYPE_POGO_E02              3542
  21 #define CONFIG_MACH_TYPE                MACH_TYPE_POGO_E02
  22 #define CONFIG_IDENT_STRING             "\nPogo E02"
  23
  24 /*
  25  * High Level Configuration Options (easy to change)
  26  */
  27 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  28 #define CONFIG_KW88F6281                /* SOC Name */
  29 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  30
  31 /*
  32  * Commands configuration
  33  */
  34 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  35 #define CONFIG_SYS_MVFS
  36 #define CONFIG_CMD_DHCP
  37 #define CONFIG_CMD_ENV
  38 #define CONFIG_CMD_MII
  39 #define CONFIG_CMD_NAND
  40 #define CONFIG_CMD_PING
  41 #define CONFIG_CMD_USB
  42
  43 /*
  44  * mv-common.h should be defined after CMD configs since it used them
  45  * to enable certain macros
  46  */
  47 #include "mv-common.h"
  48
  49 /*
  50  *  Environment variables configurations
  51  */
  52 #ifdef CONFIG_CMD_NAND
  53 #define CONFIG_ENV_IS_IN_NAND
  54 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  55 #else
  56 #define CONFIG_ENV_IS_NOWHERE
  57 #endif
  58
  59 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  60 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  61
  62 /*
  63  * Default environment variables
  64  */
  65 #define CONFIG_BOOTCOMMAND \
  66         "setenv bootargs $(bootargs_console); " \
  67         "run bootcmd_usb; " \
  68         "bootm 0x00800000 0x01100000"
  69
  70 #define CONFIG_EXTRA_ENV_SETTINGS \
  71         "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
  72         "32M(rootfs),-(data)\0"\
  73         "mtdids=nand0=orion_nand\0"\
  74         "bootargs_console=console=ttyS0,115200\0" \
  75         "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
  76         "ext2load usb 0:1 0x01100000 /uInitrd\0"
  77
  78 /*
  79  * Ethernet Driver configuration
  80  */
  81 #ifdef CONFIG_CMD_NET
  82 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  83 #define CONFIG_PHY_BASE_ADR     0
  84 #endif /* CONFIG_CMD_NET */
  85
  86 /*
  87  * File system
  88  */
  89 #define CONFIG_CMD_EXT2
  90 #define CONFIG_CMD_FAT
  91 #define CONFIG_CMD_JFFS2
  92 #define CONFIG_CMD_UBI
  93 #define CONFIG_CMD_UBIFS
  94 #define CONFIG_RBTREE
  95 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
  96 #define CONFIG_MTD_PARTITIONS
  97 #define CONFIG_CMD_MTDPARTS
  98 #define CONFIG_LZO
  99
 100 #endif /* _CONFIG_POGO_E02_H */