include/configs/wb45n.h

   1 /*
   2  * Configuation settings for the WB45N CPU Module.
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H__
   8 #define __CONFIG_H__
   9
  10 #include <asm/hardware.h>
  11
  12 /* ARM asynchronous clock */
  13 #define CONFIG_SYS_AT91_SLOW_CLOCK  32768
  14 #define CONFIG_SYS_AT91_MAIN_CLOCK  12000000    /* 12 MHz crystal */
  15
  16 #define CONFIG_CMDLINE_TAG      /* enable passing of ATAGs */
  17 #define CONFIG_SETUP_MEMORY_TAGS
  18 #define CONFIG_INITRD_TAG
  19 #define CONFIG_SKIP_LOWLEVEL_INIT
  20
  21 /* general purpose I/O */
  22 #define CONFIG_ATMEL_LEGACY     /* required until (g)pio is fixed */
  23 #define CONFIG_AT91_GPIO
  24
  25 /* serial console */
  26 #define CONFIG_ATMEL_USART
  27 #define CONFIG_USART_BASE   ATMEL_BASE_DBGU
  28 #define CONFIG_USART_ID     ATMEL_ID_SYS
  29
  30 /*
  31  * BOOTP options
  32  */
  33 #define CONFIG_BOOTP_BOOTFILESIZE
  34 #define CONFIG_BOOTP_BOOTPATH
  35 #define CONFIG_BOOTP_GATEWAY
  36 #define CONFIG_BOOTP_HOSTNAME
  37
  38 /* SDRAM */
  39 #define CONFIG_NR_DRAM_BANKS        1
  40 #define CONFIG_SYS_SDRAM_BASE       0x20000000
  41 #define CONFIG_SYS_SDRAM_SIZE       0x04000000  /* 64 MB */
  42
  43 #define CONFIG_SYS_INIT_SP_ADDR \
  44     (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  45
  46 /* NAND flash */
  47 #define CONFIG_NAND_ATMEL
  48 #define CONFIG_SYS_MAX_NAND_DEVICE  1
  49 #define CONFIG_SYS_NAND_BASE        0x40000000
  50 /* our ALE is AD21 */
  51 #define CONFIG_SYS_NAND_MASK_ALE    (1 << 21)
  52 /* our CLE is AD22 */
  53 #define CONFIG_SYS_NAND_MASK_CLE    (1 << 22)
  54 #define CONFIG_SYS_NAND_ENABLE_PIN  AT91_PIN_PD4
  55 #define CONFIG_SYS_NAND_READY_PIN   AT91_PIN_PD5
  56
  57 /* PMECC & PMERRLOC */
  58 #define CONFIG_ATMEL_NAND_HWECC     1
  59 #define CONFIG_ATMEL_NAND_HW_PMECC  1
  60 #define CONFIG_PMECC_CAP            4
  61 #define CONFIG_PMECC_SECTOR_SIZE    512
  62
  63 #define CONFIG_MTD_DEVICE
  64 #define CONFIG_CMD_MTDPARTS
  65 #define CONFIG_MTD_PARTITIONS
  66 #define CONFIG_RBTREE
  67 #define CONFIG_LZO
  68
  69 /* Ethernet */
  70 #define CONFIG_MACB
  71 #define CONFIG_RMII
  72 #define CONFIG_NET_RETRY_COUNT      20
  73 #define CONFIG_MACB_SEARCH_PHY
  74 #define CONFIG_ETHADDR              C0:EE:40:00:00:00
  75 #define CONFIG_ENV_OVERWRITE        1
  76
  77 /* System */
  78 #define CONFIG_SYS_LOAD_ADDR        0x22000000  /* load address */
  79 #define CONFIG_SYS_MEMTEST_START    CONFIG_SYS_SDRAM_BASE
  80 #define CONFIG_SYS_MEMTEST_END      0x23e00000
  81
  82 #ifdef CONFIG_SYS_USE_NANDFLASH
  83 /* bootstrap + u-boot + env + linux in nandflash */
  84 #define CONFIG_ENV_OFFSET           0xa0000
  85 #define CONFIG_ENV_OFFSET_REDUND    0xc0000
  86 #define CONFIG_ENV_SIZE             0x20000     /* 1 block = 128 kB */
  87
  88 #define CONFIG_BOOTCOMMAND  "nand read 0x22000000 0xe0000 0x280000; " \
  89     "run _mtd; bootm"
  90
  91 #define MTDIDS_DEFAULT      "nand0=atmel_nand"
  92 #define MTDPARTS_DEFAULT    "mtdparts=atmel_nand:" \
  93                             "128K(at91bs)," \
  94                             "512K(u-boot)," \
  95                             "128K(u-boot-env)," \
  96                             "128K(redund-env)," \
  97                             "2560K(kernel-a)," \
  98                             "2560K(kernel-b)," \
  99                             "38912K(rootfs-a)," \
 100                             "38912K(rootfs-b)," \
 101                             "46208K(user)," \
 102                             "512K(logs)"
 103
 104 #else
 105 #error No boot method selected, please select 'CONFIG_SYS_USE_NANDFLASH'
 106 #endif
 107
 108 #define CONFIG_BOOTARGS     "console=ttyS0,115200 earlyprintk " \
 109                             "rw noinitrd mem=64M "              \
 110                             "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6"
 111
 112 #define CONFIG_EXTRA_ENV_SETTINGS       \
 113     "_mtd=mtdparts default; setenv bootargs ${bootargs} ${mtdparts}\0" \
 114     "autoload=no\0" \
 115     "autostart=no\0" \
 116     "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
 117     "\0"
 118
 119 #define CONFIG_SYS_CBSIZE   256
 120 #define CONFIG_SYS_MAXARGS  16
 121 #define CONFIG_SYS_LONGHELP
 122 #define CONFIG_CMDLINE_EDITING
 123 #define CONFIG_AUTO_COMPLETE
 124
 125 /*
 126  * Size of malloc() pool
 127  */
 128 #define CONFIG_SYS_MALLOC_LEN       (512 * 1024 + 0x1000)
 129
 130 /* SPL */
 131 #define CONFIG_SPL_FRAMEWORK
 132 #define CONFIG_SPL_TEXT_BASE        0x300000
 133 #define CONFIG_SPL_MAX_SIZE         0x6000
 134 #define CONFIG_SPL_STACK            0x308000
 135
 136 #define CONFIG_SPL_BSS_START_ADDR   0x20000000
 137 #define CONFIG_SPL_BSS_MAX_SIZE     0x80000
 138 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000
 139 #define CONFIG_SYS_SPL_MALLOC_SIZE  0x80000
 140
 141 #define CONFIG_SYS_MONITOR_LEN      (512 << 10)
 142
 143 #define CONFIG_SYS_MASTER_CLOCK     132096000
 144 #define CONFIG_SYS_AT91_PLLA        0x20c73f03
 145 #define CONFIG_SYS_MCKR             0x1301
 146 #define CONFIG_SYS_MCKR_CSS         0x1302
 147
 148 #define CONFIG_SPL_NAND_DRIVERS
 149 #define CONFIG_SPL_NAND_BASE
 150 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
 151 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 152 #define CONFIG_SYS_NAND_PAGE_SIZE   0x800
 153 #define CONFIG_SYS_NAND_PAGE_COUNT  64
 154 #define CONFIG_SYS_NAND_OOBSIZE     64
 155 #define CONFIG_SYS_NAND_BLOCK_SIZE  0x20000
 156 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
 157 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 158
 159 #endif                          /* __CONFIG_H__ */