dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb
+dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
+
targets += $(dtb-y)
# Add any required device tree compiler flags here
--- /dev/null
+#ifndef _ST_PINCFG_H_
+#define _ST_PINCFG_H_
+
+/* Alternate functions */
+#define ALT1 1
+#define ALT2 2
+#define ALT3 3
+#define ALT4 4
+#define ALT5 5
+#define ALT6 6
+#define ALT7 7
+
+/* Output enable */
+#define OE (1 << 27)
+/* Pull Up */
+#define PU (1 << 26)
+/* Open Drain */
+#define OD (1 << 25)
+#define RT (1 << 23)
+#define INVERTCLK (1 << 22)
+#define CLKNOTDATA (1 << 21)
+#define DOUBLE_EDGE (1 << 20)
+#define CLK_A (0 << 18)
+#define CLK_B (1 << 18)
+#define CLK_C (2 << 18)
+#define CLK_D (3 << 18)
+
+/* User-frendly defines for Pin Direction */
+ /* oe = 0, pu = 0, od = 0 */
+#define IN (0)
+ /* oe = 0, pu = 1, od = 0 */
+#define IN_PU (PU)
+ /* oe = 1, pu = 0, od = 0 */
+#define OUT (OE)
+ /* oe = 1, pu = 0, od = 1 */
+#define BIDIR (OE | OD)
+ /* oe = 1, pu = 1, od = 1 */
+#define BIDIR_PU (OE | PU | OD)
+
+/* RETIME_TYPE */
+/*
+ * B Mode
+ * Bypass retime with optional delay parameter
+ */
+#define BYPASS (0)
+/*
+ * R0, R1, R0D, R1D modes
+ * single-edge data non inverted clock, retime data with clk
+ */
+#define SE_NICLK_IO (RT)
+/*
+ * RIV0, RIV1, RIV0D, RIV1D modes
+ * single-edge data inverted clock, retime data with clk
+ */
+#define SE_ICLK_IO (RT | INVERTCLK)
+/*
+ * R0E, R1E, R0ED, R1ED modes
+ * double-edge data, retime data with clk
+ */
+#define DE_IO (RT | DOUBLE_EDGE)
+/*
+ * CIV0, CIV1 modes with inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define ICLK (RT | CLKNOTDATA | INVERTCLK)
+/*
+ * CLK0, CLK1 modes with non-inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define NICLK (RT | CLKNOTDATA)
+#endif /* _ST_PINCFG_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <dt-bindings/clock/stih407-clks.h>
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ clk_sysin: clk-sysin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * A9 PLL.
+ */
+ clockgen-a9@92b0000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x92b0000 0xffff>;
+
+ clockgen_a9_pll: clockgen-a9-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-clkgen-plla9";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clockgen-a9-pll-odf";
+ };
+ };
+
+ /*
+ * ARM CPU related clocks.
+ */
+ clk_m_a9: clk-m-a9@92b0000 {
+ #clock-cells = <0>;
+ compatible = "st,stih407-clkgen-a9-mux";
+ reg = <0x92b0000 0x10000>;
+
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_s_c0_flexgen 13>;
+
+ clock-output-names = "clk-m-a9-ext2f-div2";
+
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ clk_ext2f_a9: clockgen-c0@13 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ clock-output-names = "clk-s-icn-reg-0";
+ };
+
+ clockgen-a@090ff000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x90ff000 0x1000>;
+
+ clk_s_a0_pll: clk-s-a0-pll {
+ #clock-cells = <1>;
+ compatible = "st,clkgen-pll0";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-pll-ofd-0";
+ };
+
+ clk_s_a0_flexgen: clk-s-a0-flexgen {
+ compatible = "st,flexgen";
+
+ #clock-cells = <1>;
+
+ clocks = <&clk_s_a0_pll 0>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-ic-lmi0";
+ };
+ };
+
+ clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-pll";
+ reg = <0x9103000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-fs0-ch0",
+ "clk-s-c0-fs0-ch1",
+ "clk-s-c0-fs0-ch2",
+ "clk-s-c0-fs0-ch3";
+ };
+
+ clk_s_c0: clockgen-c@09103000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9103000 0x1000>;
+
+ clk_s_c0_pll0: clk-s-c0-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,clkgen-pll0";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll0-odf-0";
+ };
+
+ clk_s_c0_pll1: clk-s-c0-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,clkgen-pll1";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll1-odf-0";
+ };
+
+ clk_s_c0_flexgen: clk-s-c0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_c0_pll0 0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_quadfs 0>,
+ <&clk_s_c0_quadfs 1>,
+ <&clk_s_c0_quadfs 2>,
+ <&clk_s_c0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-icn-gpu",
+ "clk-fdma",
+ "clk-nand",
+ "clk-hva",
+ "clk-proc-stfe",
+ "clk-proc-tp",
+ "clk-rx-icn-dmu",
+ "clk-rx-icn-hva",
+ "clk-icn-cpu",
+ "clk-tx-icn-dmu",
+ "clk-mmc-0",
+ "clk-mmc-1",
+ "clk-jpegdec",
+ "clk-ext2fa9",
+ "clk-ic-bdisp-0",
+ "clk-ic-bdisp-1",
+ "clk-pp-dmu",
+ "clk-vid-dmu",
+ "clk-dss-lpc",
+ "clk-st231-aud-0",
+ "clk-st231-gp-1",
+ "clk-st231-dmu",
+ "clk-icn-lmi",
+ "clk-tx-icn-disp-1",
+ "clk-icn-sbc",
+ "clk-stfe-frc2",
+ "clk-eth-phy",
+ "clk-eth-ref-phyclk",
+ "clk-flash-promip",
+ "clk-main-disp",
+ "clk-aux-disp",
+ "clk-compo-dvp";
+ };
+ };
+
+ clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+ #clock-cells = <1>;
+ compatible = "st,quadfs";
+ reg = <0x9104000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d0-fs0-ch0",
+ "clk-s-d0-fs0-ch1",
+ "clk-s-d0-fs0-ch2",
+ "clk-s-d0-fs0-ch3";
+ };
+
+ clockgen-d0@09104000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9104000 0x1000>;
+
+ clk_s_d0_flexgen: clk-s-d0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen-audio", "st,flexgen";
+
+ clocks = <&clk_s_d0_quadfs 0>,
+ <&clk_s_d0_quadfs 1>,
+ <&clk_s_d0_quadfs 2>,
+ <&clk_s_d0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-pcm-0",
+ "clk-pcm-1",
+ "clk-pcm-2",
+ "clk-spdiff";
+ };
+ };
+
+ clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+ #clock-cells = <1>;
+ compatible = "st,quadfs";
+ reg = <0x9106000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d2-fs0-ch0",
+ "clk-s-d2-fs0-ch1",
+ "clk-s-d2-fs0-ch2",
+ "clk-s-d2-fs0-ch3";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ clockgen-d2@x9106000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9106000 0x1000>;
+
+ clk_s_d2_flexgen: clk-s-d2-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen-video", "st,flexgen";
+
+ clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>,
+ <&clk_s_d2_quadfs 2>,
+ <&clk_s_d2_quadfs 3>,
+ <&clk_sysin>,
+ <&clk_sysin>,
+ <&clk_tmdsout_hdmi>;
+
+ clock-output-names = "clk-pix-main-disp",
+ "clk-pix-pip",
+ "clk-pix-gdp1",
+ "clk-pix-gdp2",
+ "clk-pix-gdp3",
+ "clk-pix-gdp4",
+ "clk-pix-aux-disp",
+ "clk-denc",
+ "clk-pix-hddac",
+ "clk-hddac",
+ "clk-sddac",
+ "clk-pix-dvo",
+ "clk-dvo",
+ "clk-pix-hdmi",
+ "clk-tmds-hdmi",
+ "clk-ref-hdmiphy";
+ };
+ };
+
+ clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+ #clock-cells = <1>;
+ compatible = "st,quadfs";
+ reg = <0x9107000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d3-fs0-ch0",
+ "clk-s-d3-fs0-ch1",
+ "clk-s-d3-fs0-ch2",
+ "clk-s-d3-fs0-ch3";
+ };
+
+ clockgen-d3@9107000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9107000 0x1000>;
+
+ clk_s_d3_flexgen: clk-s-d3-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d3_quadfs 0>,
+ <&clk_s_d3_quadfs 1>,
+ <&clk_s_d3_quadfs 2>,
+ <&clk_s_d3_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-stfe-frc1",
+ "clk-tsout-0",
+ "clk-tsout-1",
+ "clk-mchi",
+ "clk-vsens-compo",
+ "clk-frc1-remote",
+ "clk-lpc-0",
+ "clk-lpc-1";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-pinctrl.dtsi"
+#include <dt-bindings/mfd/st-lpc.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/stih407-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dmu_reserved: rproc@44000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x44000000 0x01000000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+
+ /* u-boot puts hpen in SBC dmem at 0xa4 offset */
+ cpu-release-addr = <0x94100A4>;
+
+ /* kHz uV */
+ operating-points = <1500000 0
+ 1200000 0
+ 800000 0
+ 500000 0>;
+
+ clocks = <&clk_m_a9>;
+ clock-names = "cpu";
+ clock-latency = <100000>;
+ st,syscfg = <&syscfg_core 0x8e0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+
+ /* u-boot puts hpen in SBC dmem at 0xa4 offset */
+ cpu-release-addr = <0x94100A4>;
+
+ /* kHz uV */
+ operating-points = <1500000 0
+ 1200000 0
+ 800000 0
+ 500000 0>;
+ };
+ };
+
+ intc: interrupt-controller@08761000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+ };
+
+ scu@08760000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x08760000 0x1000>;
+ };
+
+ timer@08760200 {
+ interrupt-parent = <&intc>;
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x08760200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&arm_periph_clk>;
+ };
+
+ l2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0x08762000 0x1000>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ arm-pmu {
+ interrupt-parent = <&intc>;
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pwm_regulator: pwm-regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 3 8448>;
+ regulator-name = "CPU_1V0_AVS";
+ regulator-min-microvolt = <784000>;
+ regulator-max-microvolt = <1299000>;
+ regulator-always-on;
+ max-duty-cycle = <255>;
+ status = "okay";
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+ compatible = "simple-bus";
+
+ restart {
+ compatible = "st,stih407-restart";
+ st,syscfg = <&syscfg_sbc_reg>;
+ status = "okay";
+ };
+
+ powerdown: powerdown-controller {
+ compatible = "st,stih407-powerdown";
+ #reset-cells = <1>;
+ };
+
+ softreset: softreset-controller {
+ compatible = "st,stih407-softreset";
+ #reset-cells = <1>;
+ };
+
+ picophyreset: picophyreset-controller {
+ compatible = "st,stih407-picophyreset";
+ #reset-cells = <1>;
+ };
+
+ syscfg_sbc: sbc-syscfg@9620000 {
+ compatible = "st,stih407-sbc-syscfg", "syscon";
+ reg = <0x9620000 0x1000>;
+ };
+
+ syscfg_front: front-syscfg@9280000 {
+ compatible = "st,stih407-front-syscfg", "syscon";
+ reg = <0x9280000 0x1000>;
+ };
+
+ syscfg_rear: rear-syscfg@9290000 {
+ compatible = "st,stih407-rear-syscfg", "syscon";
+ reg = <0x9290000 0x1000>;
+ };
+
+ syscfg_flash: flash-syscfg@92a0000 {
+ compatible = "st,stih407-flash-syscfg", "syscon";
+ reg = <0x92a0000 0x1000>;
+ };
+
+ syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
+ compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+ reg = <0x9600000 0x1000>;
+ };
+
+ syscfg_core: core-syscfg@92b0000 {
+ compatible = "st,stih407-core-syscfg", "syscon";
+ reg = <0x92b0000 0x1000>;
+ };
+
+ syscfg_lpm: lpm-syscfg@94b5100 {
+ compatible = "st,stih407-lpm-syscfg", "syscon";
+ reg = <0x94b5100 0x1000>;
+ };
+
+ irq-syscfg {
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_core>;
+ st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+ <ST_IRQ_SYSCFG_PMU_1>;
+ st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+ <ST_IRQ_SYSCFG_DISABLED>;
+ };
+
+ /* Display */
+ vtg_main: sti-vtg-main@8d02800 {
+ compatible = "st,vtg";
+ reg = <0x8d02800 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux@8d00200 {
+ compatible = "st,vtg";
+ reg = <0x8d00200 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ };
+
+ serial@9830000 {
+ compatible = "st,asc";
+ reg = <0x9830000 0x2c>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial0>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+ status = "disabled";
+ };
+
+ serial@9831000 {
+ compatible = "st,asc";
+ reg = <0x9831000 0x2c>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial1>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+ status = "disabled";
+ };
+
+ serial@9832000 {
+ compatible = "st,asc";
+ reg = <0x9832000 0x2c>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial2>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+ status = "disabled";
+ };
+
+ /* SBC_ASC0 - UART10 */
+ sbc_serial0: serial@9530000 {
+ compatible = "st,asc";
+ reg = <0x9530000 0x2c>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial0>;
+ clocks = <&clk_sysin>;
+
+ status = "disabled";
+ };
+
+ serial@9531000 {
+ compatible = "st,asc";
+ reg = <0x9531000 0x2c>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial1>;
+ clocks = <&clk_sysin>;
+
+ status = "disabled";
+ };
+
+ i2c@9840000 {
+ compatible = "st,comms-ssc4-i2c";
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x9840000 0x110>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@9841000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9841000 0x110>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@9842000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9842000 0x110>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@9843000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9843000 0x110>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@9844000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9844000 0x110>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@9845000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9845000 0x110>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+
+ /* SSCs on SBC */
+ i2c@9540000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9540000 0x110>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@9541000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9541000 0x110>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c11_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb2_picophy0: phy1 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0x100 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY2_RESET>;
+ reset-names = "global", "port";
+ };
+
+ miphy28lp_phy: miphy28lp@9b22000 {
+ compatible = "st,miphy28lp-phy";
+ st,syscfg = <&syscfg_core>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ phy_port0: port@9b22000 {
+ reg = <0x9b22000 0xff>,
+ <0x9b09000 0xff>,
+ <0x9b04000 0xff>;
+ reg-names = "sata-up",
+ "pcie-up",
+ "pipew";
+
+ st,syscfg = <0x114 0x818 0xe0 0xec>;
+ #phy-cells = <1>;
+
+ reset-names = "miphy-sw-rst";
+ resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
+ };
+
+ phy_port1: port@9b2a000 {
+ reg = <0x9b2a000 0xff>,
+ <0x9b19000 0xff>,
+ <0x9b14000 0xff>;
+ reg-names = "sata-up",
+ "pcie-up",
+ "pipew";
+
+ st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+ #phy-cells = <1>;
+
+ reset-names = "miphy-sw-rst";
+ resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
+ };
+
+ phy_port2: port@8f95000 {
+ reg = <0x8f95000 0xff>,
+ <0x8f90000 0xff>;
+ reg-names = "pipew",
+ "usb3-up";
+
+ st,syscfg = <0x11c 0x820>;
+
+ #phy-cells = <1>;
+
+ reset-names = "miphy-sw-rst";
+ resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
+ };
+ };
+
+ spi@9840000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9840000 0x110>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi@9841000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9841000 0x110>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ status = "disabled";
+ };
+
+ spi@9842000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9842000 0x110>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
+
+ status = "disabled";
+ };
+
+ spi@9843000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9843000 0x110>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi3_default>;
+
+ status = "disabled";
+ };
+
+ spi@9844000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9844000 0x110>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi4_default>;
+
+ status = "disabled";
+ };
+
+ /* SBC SSC */
+ spi@9540000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9540000 0x110>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi10_default>;
+
+ status = "disabled";
+ };
+
+ spi@9541000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9541000 0x110>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi11_default>;
+
+ status = "disabled";
+ };
+
+ spi@9542000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9542000 0x110>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi12_default>;
+
+ status = "disabled";
+ };
+
+ mmc0: sdhci@09060000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ status = "disabled";
+ reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+ reg-names = "mmc", "top-mmc-delay";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc", "icn";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+ <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
+ bus-width = <8>;
+ };
+
+ mmc1: sdhci@09080000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ status = "disabled";
+ reg = <0x09080000 0x7ff>;
+ reg-names = "mmc";
+ interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1>;
+ clock-names = "mmc", "icn";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+ <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
+ resets = <&softreset STIH407_MMC1_SOFTRESET>;
+ bus-width = <4>;
+ };
+
+ /* Watchdog and Real-Time Clock */
+ lpc@8787000 {
+ compatible = "st,stih407-lpc";
+ reg = <0x8787000 0x1000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+ timeout-sec = <120>;
+ st,syscfg = <&syscfg_core>;
+ st,lpc-mode = <ST_LPC_MODE_WDT>;
+ };
+
+ lpc@8788000 {
+ compatible = "st,stih407-lpc";
+ reg = <0x8788000 0x1000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
+ st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
+ };
+
+ sata0: sata@9b20000 {
+ compatible = "st,ahci";
+ reg = <0x9b20000 0x1000>;
+
+ interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+ interrupt-names = "hostc";
+
+ phys = <&phy_port0 PHY_TYPE_SATA>;
+ phy-names = "ahci_phy";
+
+ resets = <&powerdown STIH407_SATA0_POWERDOWN>,
+ <&softreset STIH407_SATA0_SOFTRESET>,
+ <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+ reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
+
+ clock-names = "ahci_clk";
+ clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+ ports-implemented = <0x1>;
+
+ status = "disabled";
+ };
+
+ sata1: sata@9b28000 {
+ compatible = "st,ahci";
+ reg = <0x9b28000 0x1000>;
+
+ interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
+ interrupt-names = "hostc";
+
+ phys = <&phy_port1 PHY_TYPE_SATA>;
+ phy-names = "ahci_phy";
+
+ resets = <&powerdown STIH407_SATA1_POWERDOWN>,
+ <&softreset STIH407_SATA1_SOFTRESET>,
+ <&softreset STIH407_SATA1_PWR_SOFTRESET>;
+ reset-names = "pwr-dwn",
+ "sw-rst",
+ "pwr-rst";
+
+ clock-names = "ahci_clk";
+ clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+ ports-implemented = <0x1>;
+
+ status = "disabled";
+ };
+
+
+ st_dwc3: dwc3@8f94000 {
+ compatible = "st,stih407-dwc3";
+ reg = <0x08f94000 0x1000>, <0x110 0x4>;
+ reg-names = "reg-glue", "syscfg-reg";
+ st,syscfg = <&syscfg_core>;
+ resets = <&powerdown STIH407_USB3_POWERDOWN>,
+ <&softreset STIH407_MIPHY2_SOFTRESET>;
+ reset-names = "powerdown", "softreset";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
+ ranges;
+
+ status = "disabled";
+
+ dwc3: dwc3@9900000 {
+ compatible = "snps,dwc3";
+ reg = <0x09900000 0x100000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+ dr_mode = "host";
+ phy-names = "usb2-phy", "usb3-phy";
+ phys = <&usb2_picophy0>,
+ <&phy_port2 PHY_TYPE_USB3>;
+ };
+ };
+
+ /* COMMS PWM Module */
+ pwm0: pwm@9810000 {
+ compatible = "st,sti-pwm";
+ #pwm-cells = <2>;
+ reg = <0x9810000 0x68>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <1>;
+
+ status = "disabled";
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@9510000 {
+ compatible = "st,sti-pwm";
+ #pwm-cells = <2>;
+ reg = <0x9510000 0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ &pinctrl_pwm1_chan1_default
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <4>;
+
+ status = "disabled";
+ };
+
+ rng10: rng@08a89000 {
+ compatible = "st,rng";
+ reg = <0x08a89000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ rng11: rng@08a8a000 {
+ compatible = "st,rng";
+ reg = <0x08a8a000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ ethernet0: dwmac@9630000 {
+ device_type = "network";
+ status = "disabled";
+ compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+ reg = <0x9630000 0x8000>, <0x80 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+
+ st,syscon = <&syscfg_sbc_reg 0x80>;
+ st,gmac_en;
+ resets = <&softreset STIH407_ETH1_SOFTRESET>;
+ reset-names = "stmmaceth";
+
+ interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
+ <GIC_SPI 99 IRQ_TYPE_NONE>;
+ interrupt-names = "macirq", "eth_wake_irq";
+
+ /* DMA Bus Mode */
+ snps,pbl = <8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1>;
+
+ clock-names = "stmmaceth", "sti-ethclk";
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_ETH_PHY>;
+ };
+
+ cec: sti-cec@094a087c {
+ compatible = "st,stih-cec";
+ reg = <0x94a087c 0x64>;
+ clocks = <&clk_sysin>;
+ clock-names = "cec-clk";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+ interrupt-names = "cec-irq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cec0_default>;
+ resets = <&softreset STIH407_LPM_SOFTRESET>;
+ };
+
+ rng10: rng@08a89000 {
+ compatible = "st,rng";
+ reg = <0x08a89000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ rng11: rng@08a8a000 {
+ compatible = "st,rng";
+ reg = <0x08a8a000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ mailbox0: mailbox@8f00000 {
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f00000 0x1000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>;
+ #mbox-cells = <2>;
+ mbox-name = "a9";
+ status = "okay";
+ };
+
+ mailbox1: mailbox@8f01000 {
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f01000 0x1000>;
+ #mbox-cells = <2>;
+ mbox-name = "st231_gp_1";
+ status = "okay";
+ };
+
+ mailbox2: mailbox@8f02000 {
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f02000 0x1000>;
+ #mbox-cells = <2>;
+ mbox-name = "st231_gp_0";
+ status = "okay";
+ };
+
+ mailbox3: mailbox@8f03000 {
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f03000 0x1000>;
+ #mbox-cells = <2>;
+ mbox-name = "st231_audio_video";
+ status = "okay";
+ };
+
+ st231_delta: st231-delta@44000000 {
+ compatible = "st,st231-rproc";
+ memory-region = <&dmu_reserved>;
+ resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
+ reset-names = "sw_reset";
+ clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
+ clock-frequency = <600000000>;
+ st,syscfg = <&syscfg_core 0x224>;
+ #mbox-cells = <1>;
+ mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+ mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
+ };
+
+ /* fdma audio */
+ fdma0: dma-controller@8e20000 {
+ compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+ reg = <0x8e20000 0x8000>,
+ <0x8e30000 0x3000>,
+ <0x8e37000 0x1000>,
+ <0x8e38000 0x8000>;
+ reg-names = "slimcore", "dmem", "peripherals", "imem";
+ clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+ dma-channels = <16>;
+ #dma-cells = <3>;
+ };
+
+ /* fdma app */
+ fdma1: dma-controller@8e40000 {
+ compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
+ reg = <0x8e40000 0x8000>,
+ <0x8e50000 0x3000>,
+ <0x8e57000 0x1000>,
+ <0x8e58000 0x8000>;
+ reg-names = "slimcore", "dmem", "peripherals", "imem";
+ clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+ <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+ <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
+ dma-channels = <16>;
+ #dma-cells = <3>;
+ };
+
+ /* fdma free running */
+ fdma2: dma-controller@8e60000 {
+ compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
+ reg = <0x8e60000 0x8000>,
+ <0x8e70000 0x3000>,
+ <0x8e77000 0x1000>,
+ <0x8e78000 0x8000>;
+ reg-names = "slimcore", "dmem", "peripherals", "imem";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
+ dma-channels = <16>;
+ #dma-cells = <3>;
+ clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ };
+
+ sti_sasg_codec: sti-sasg-codec {
+ compatible = "st,stih407-sas-codec";
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ st,syscfg = <&syscfg_core>;
+ };
+
+ sti_uni_player0: sti-uni-player@8d80000 {
+ compatible = "st,stih407-uni-player-hdmi";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
+ assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
+ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
+ assigned-clock-rates = <50000000>;
+ reg = <0x8d80000 0x158>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 2 0 1>;
+ dma-names = "tx";
+
+ status = "disabled";
+ };
+
+ sti_uni_player1: sti-uni-player@8d81000 {
+ compatible = "st,stih407-uni-player-pcm-out";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
+ assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
+ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
+ assigned-clock-rates = <50000000>;
+ reg = <0x8d81000 0x158>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 3 0 1>;
+ dma-names = "tx";
+
+ status = "disabled";
+ };
+
+ sti_uni_player2: sti-uni-player@8d82000 {
+ compatible = "st,stih407-uni-player-dac";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+ assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
+ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
+ assigned-clock-rates = <50000000>;
+ reg = <0x8d82000 0x158>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 4 0 1>;
+ dma-names = "tx";
+
+ status = "disabled";
+ };
+
+ sti_uni_player3: sti-uni-player@8d85000 {
+ compatible = "st,stih407-uni-player-spdif";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
+ assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
+ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
+ assigned-clock-rates = <50000000>;
+ reg = <0x8d85000 0x158>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 7 0 1>;
+ dma-names = "tx";
+
+ status = "disabled";
+ };
+
+ sti_uni_reader0: sti-uni-reader@8d83000 {
+ compatible = "st,stih407-uni-reader-pcm_in";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ reg = <0x8d83000 0x158>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 5 0 1>;
+ dma-names = "rx";
+
+ status = "disabled";
+ };
+
+ sti_uni_reader1: sti-uni-reader@8d84000 {
+ compatible = "st,stih407-uni-reader-hdmi";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ reg = <0x8d84000 0x158>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 6 0 1>;
+ dma-names = "rx";
+
+ status = "disabled";
+ };
+
+ rc: rc@09518000 {
+ compatible = "st,comms-irb";
+ reg = <0x09518000 0x234>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_NONE>;
+ rx-mode = "infrared";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ir
+ &pinctrl_uhf
+ &pinctrl_tx
+ &pinctrl_tx_od>;
+ clocks = <&clk_sysin>;
+ resets = <&softreset STIH407_IRB_SOFTRESET>;
+
+ status = "disabled";
+ };
+
+ socinfo {
+ compatible = "st,stih407-socinfo";
+ st,syscfg = <&syscfg_core>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+ aliases {
+ /* 0-5: PIO_SBC */
+ gpio0 = &pio0;
+ gpio1 = &pio1;
+ gpio2 = &pio2;
+ gpio3 = &pio3;
+ gpio4 = &pio4;
+ gpio5 = &pio5;
+ /* 10-19: PIO_FRONT0 */
+ gpio6 = &pio10;
+ gpio7 = &pio11;
+ gpio8 = &pio12;
+ gpio9 = &pio13;
+ gpio10 = &pio14;
+ gpio11 = &pio15;
+ gpio12 = &pio16;
+ gpio13 = &pio17;
+ gpio14 = &pio18;
+ gpio15 = &pio19;
+ /* 20: PIO_FRONT1 */
+ gpio16 = &pio20;
+ /* 30-35: PIO_REAR */
+ gpio17 = &pio30;
+ gpio18 = &pio31;
+ gpio19 = &pio32;
+ gpio20 = &pio33;
+ gpio21 = &pio34;
+ gpio22 = &pio35;
+ /* 40-42: PIO_FLASH */
+ gpio23 = &pio40;
+ gpio24 = &pio41;
+ gpio25 = &pio42;
+ };
+
+ soc {
+ pin-controller-sbc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-sbc-pinctrl";
+ st,syscfg = <&syscfg_sbc>;
+ reg = <0x0961f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ interrupt-names = "irqmux";
+ ranges = <0 0x09610000 0x6000>;
+
+ pio0: gpio@09610000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO0";
+ };
+ pio1: gpio@09611000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO1";
+ };
+ pio2: gpio@09612000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO2";
+ };
+ pio3: gpio@09613000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO3";
+ };
+ pio4: gpio@09614000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO4";
+ };
+
+ pio5: gpio@09615000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO5";
+ st,retime-pin-mask = <0x3f>;
+ };
+
+ cec0 {
+ pinctrl_cec0_default: cec0-default {
+ st,pins {
+ hdmi_cec = <&pio2 4 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ rc {
+ pinctrl_ir: ir0 {
+ st,pins {
+ ir = <&pio4 0 ALT2 IN>;
+ };
+ };
+
+ pinctrl_uhf: uhf0 {
+ st,pins {
+ ir = <&pio4 1 ALT2 IN>;
+ };
+ };
+
+ pinctrl_tx: tx0 {
+ st,pins {
+ tx = <&pio4 2 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_tx_od: tx_od0 {
+ st,pins {
+ tx_od = <&pio4 3 ALT2 OUT>;
+ };
+ };
+ };
+
+ /* SBC_ASC0 - UART10 */
+ sbc_serial0 {
+ pinctrl_sbc_serial0: sbc_serial0-0 {
+ st,pins {
+ tx = <&pio3 4 ALT1 OUT>;
+ rx = <&pio3 5 ALT1 IN>;
+ };
+ };
+ };
+ /* SBC_ASC1 - UART11 */
+ sbc_serial1 {
+ pinctrl_sbc_serial1: sbc_serial1-0 {
+ st,pins {
+ tx = <&pio2 6 ALT3 OUT>;
+ rx = <&pio2 7 ALT3 IN>;
+ };
+ };
+ };
+
+ i2c10 {
+ pinctrl_i2c10_default: i2c10-default {
+ st,pins {
+ sda = <&pio4 6 ALT1 BIDIR>;
+ scl = <&pio4 5 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ i2c11 {
+ pinctrl_i2c11_default: i2c11-default {
+ st,pins {
+ sda = <&pio5 1 ALT1 BIDIR>;
+ scl = <&pio5 0 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ keyscan {
+ pinctrl_keyscan: keyscan {
+ st,pins {
+ keyin0 = <&pio4 0 ALT6 IN>;
+ keyin1 = <&pio4 5 ALT4 IN>;
+ keyin2 = <&pio0 4 ALT2 IN>;
+ keyin3 = <&pio2 6 ALT2 IN>;
+
+ keyout0 = <&pio4 6 ALT4 OUT>;
+ keyout1 = <&pio1 7 ALT2 OUT>;
+ keyout2 = <&pio0 6 ALT2 OUT>;
+ keyout3 = <&pio2 7 ALT2 OUT>;
+ };
+ };
+ };
+
+ gmac1 {
+ /*
+ * Almost all the boards based on STiH407 SoC have an embedded
+ * switch where the mdio/mdc have been used for managing the SMI
+ * iface via I2C. For this reason these lines can be allocated
+ * by using dedicated configuration (in case of there will be a
+ * standard PHY transceiver on-board).
+ */
+ pinctrl_rgmii1: rgmii1-0 {
+ st,pins {
+
+ txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
+ rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>;
+ };
+ };
+
+ pinctrl_rgmii1_mdio: rgmii1-mdio {
+ st,pins {
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ };
+ };
+
+ pinctrl_rgmii1_mdio_1: rgmii1-mdio-1 {
+ st,pins {
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ };
+ };
+
+ pinctrl_mii1: mii1 {
+ st,pins {
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+ mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+ };
+ };
+
+ pinctrl_rmii1: rmii1-0 {
+ st,pins {
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+
+ pinctrl_rmii1_phyclk: rmii1_phyclk {
+ st,pins {
+ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+ };
+ };
+
+ pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
+ st,pins {
+ phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
+ };
+ };
+ };
+
+ pwm1 {
+ pinctrl_pwm1_chan0_default: pwm1-0-default {
+ st,pins {
+ pwm-out = <&pio3 0 ALT1 OUT>;
+ pwm-capturein = <&pio3 2 ALT1 IN>;
+ };
+ };
+ pinctrl_pwm1_chan1_default: pwm1-1-default {
+ st,pins {
+ pwm-capturein = <&pio4 3 ALT1 IN>;
+ pwm-out = <&pio4 4 ALT1 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan2_default: pwm1-2-default {
+ st,pins {
+ pwm-out = <&pio4 6 ALT3 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan3_default: pwm1-3-default {
+ st,pins {
+ pwm-out = <&pio4 7 ALT3 OUT>;
+ };
+ };
+ };
+
+ spi10 {
+ pinctrl_spi10_default: spi10-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio4 6 ALT1 OUT>;
+ mrst = <&pio4 7 ALT1 IN>;
+ scl = <&pio4 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio4 6 ALT1 BIDIR_PU>;
+ scl = <&pio4 5 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi11 {
+ pinctrl_spi11_default: spi11-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 1 ALT2 OUT>;
+ mrst = <&pio3 0 ALT2 IN>;
+ scl = <&pio3 2 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 1 ALT2 BIDIR_PU>;
+ scl = <&pio3 2 ALT2 OUT>;
+ };
+ };
+ };
+
+ spi12 {
+ pinctrl_spi12_default: spi12-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 6 ALT2 OUT>;
+ mrst = <&pio3 4 ALT2 IN>;
+ scl = <&pio3 7 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 6 ALT2 BIDIR_PU>;
+ scl = <&pio3 7 ALT2 OUT>;
+ };
+ };
+ };
+ };
+
+ pin-controller-front0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-front-pinctrl";
+ st,syscfg = <&syscfg_front>;
+ reg = <0x0920f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+ interrupt-names = "irqmux";
+ ranges = <0 0x09200000 0x10000>;
+
+ pio10: pio@09200000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO10";
+ };
+ pio11: pio@09201000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO11";
+ };
+ pio12: pio@09202000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO12";
+ };
+ pio13: pio@09203000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO13";
+ };
+ pio14: pio@09204000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO14";
+ };
+ pio15: pio@09205000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO15";
+ };
+ pio16: pio@09206000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x100>;
+ st,bank-name = "PIO16";
+ };
+ pio17: pio@09207000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x100>;
+ st,bank-name = "PIO17";
+ };
+ pio18: pio@09208000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x100>;
+ st,bank-name = "PIO18";
+ };
+ pio19: pio@09209000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x100>;
+ st,bank-name = "PIO19";
+ };
+
+ /* Comms */
+ serial0 {
+ pinctrl_serial0: serial0-0 {
+ st,pins {
+ tx = <&pio17 0 ALT1 OUT>;
+ rx = <&pio17 1 ALT1 IN>;
+ };
+ };
+ pinctrl_serial0_rts: serial0_rts {
+ st,pins {
+ rts = <&pio17 3 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_serial0_cts: serial0_cts {
+ st,pins {
+ cts = <&pio17 2 ALT1 IN>;
+ };
+ };
+ };
+
+ serial1 {
+ pinctrl_serial1: serial1-0 {
+ st,pins {
+ tx = <&pio16 0 ALT1 OUT>;
+ rx = <&pio16 1 ALT1 IN>;
+ };
+ };
+ };
+
+ serial2 {
+ pinctrl_serial2: serial2-0 {
+ st,pins {
+ tx = <&pio15 0 ALT1 OUT>;
+ rx = <&pio15 1 ALT1 IN>;
+ };
+ };
+ };
+
+ mmc1 {
+ pinctrl_sd1: sd1-0 {
+ st,pins {
+ sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
+ sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
+ sd_led = <&pio16 6 ALT6 OUT>;
+ sd_pwren = <&pio16 7 ALT6 OUT>;
+ sd_cd = <&pio19 0 ALT6 IN>;
+ sd_wp = <&pio19 1 ALT6 IN>;
+ };
+ };
+ };
+
+
+ i2c0 {
+ pinctrl_i2c0_default: i2c0-default {
+ st,pins {
+ sda = <&pio10 6 ALT2 BIDIR>;
+ scl = <&pio10 5 ALT2 BIDIR>;
+ };
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_default: i2c1-default {
+ st,pins {
+ sda = <&pio11 1 ALT2 BIDIR>;
+ scl = <&pio11 0 ALT2 BIDIR>;
+ };
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_default: i2c2-default {
+ st,pins {
+ sda = <&pio15 6 ALT2 BIDIR>;
+ scl = <&pio15 5 ALT2 BIDIR>;
+ };
+ };
+
+ pinctrl_i2c2_alt2_1: i2c2-alt2-1 {
+ st,pins {
+ sda = <&pio12 6 ALT2 BIDIR>;
+ scl = <&pio12 5 ALT2 BIDIR>;
+ };
+ };
+ };
+
+ i2c3 {
+ pinctrl_i2c3_default: i2c3-alt1-0 {
+ st,pins {
+ sda = <&pio18 6 ALT1 BIDIR>;
+ scl = <&pio18 5 ALT1 BIDIR>;
+ };
+ };
+ pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
+ st,pins {
+ sda = <&pio17 7 ALT1 BIDIR>;
+ scl = <&pio17 6 ALT1 BIDIR>;
+ };
+ };
+ pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
+ st,pins {
+ sda = <&pio13 6 ALT3 BIDIR>;
+ scl = <&pio13 5 ALT3 BIDIR>;
+ };
+ };
+ };
+
+ spi0 {
+ pinctrl_spi0_default: spi0-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio10 6 ALT2 OUT>;
+ mrst = <&pio10 7 ALT2 IN>;
+ scl = <&pio10 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio10 6 ALT2 BIDIR_PU>;
+ scl = <&pio10 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio19 7 ALT1 OUT>;
+ mrst = <&pio19 5 ALT1 IN>;
+ scl = <&pio19 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio19 7 ALT1 BIDIR_PU>;
+ scl = <&pio19 6 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1_default: spi1-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio11 1 ALT2 OUT>;
+ mrst = <&pio11 2 ALT2 IN>;
+ scl = <&pio11 0 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio11 1 ALT2 BIDIR_PU>;
+ scl = <&pio11 0 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 3 ALT1 OUT>;
+ mrst = <&pio14 4 ALT1 IN>;
+ scl = <&pio14 2 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 3 ALT1 BIDIR_PU>;
+ scl = <&pio14 2 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi2 {
+ pinctrl_spi2_default: spi2-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio12 6 ALT2 OUT>;
+ mrst = <&pio12 7 ALT2 IN>;
+ scl = <&pio12 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio12 6 ALT2 BIDIR_PU>;
+ scl = <&pio12 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 6 ALT1 OUT>;
+ mrst = <&pio14 7 ALT1 IN>;
+ scl = <&pio14 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 6 ALT1 BIDIR_PU>;
+ scl = <&pio14 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
+ st,pins {
+ mtsr = <&pio15 6 ALT2 OUT>;
+ mrst = <&pio15 7 ALT2 IN>;
+ scl = <&pio15 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
+ st,pins {
+ mtsr = <&pio15 6 ALT2 BIDIR_PU>;
+ scl = <&pio15 5 ALT2 OUT>;
+ };
+ };
+ };
+
+ spi3 {
+ pinctrl_spi3_default: spi3-4w-alt3-0 {
+ st,pins {
+ mtsr = <&pio13 6 ALT3 OUT>;
+ mrst = <&pio13 7 ALT3 IN>;
+ scl = <&pio13 5 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
+ st,pins {
+ mtsr = <&pio13 6 ALT3 BIDIR_PU>;
+ scl = <&pio13 5 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio17 7 ALT1 OUT>;
+ mrst = <&pio17 5 ALT1 IN>;
+ scl = <&pio17 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio17 7 ALT1 BIDIR_PU>;
+ scl = <&pio17 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
+ st,pins {
+ mtsr = <&pio18 6 ALT1 OUT>;
+ mrst = <&pio18 7 ALT1 IN>;
+ scl = <&pio18 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
+ st,pins {
+ mtsr = <&pio18 6 ALT1 BIDIR_PU>;
+ scl = <&pio18 5 ALT1 OUT>;
+ };
+ };
+ };
+
+ tsin0 {
+ pinctrl_tsin0_parallel: tsin0_parallel {
+ st,pins {
+ DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA6 = <&pio10 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA5 = <&pio10 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA4 = <&pio10 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA3 = <&pio11 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA2 = <&pio11 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA1 = <&pio11 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA0 = <&pio11 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ pinctrl_tsin0_serial: tsin0_serial {
+ st,pins {
+ DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsin1 {
+ pinctrl_tsin1_parallel: tsin1_parallel {
+ st,pins {
+ DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ pinctrl_tsin1_serial: tsin1_serial {
+ st,pins {
+ DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsin2 {
+ pinctrl_tsin2_parallel: tsin2_parallel {
+ st,pins {
+ DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA6 = <&pio13 5 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+ DATA5 = <&pio13 6 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+ DATA4 = <&pio13 7 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+ DATA3 = <&pio14 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ DATA2 = <&pio14 1 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+ DATA1 = <&pio14 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ DATA0 = <&pio14 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ pinctrl_tsin2_serial: tsin2_serial {
+ st,pins {
+ DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsin3 {
+ pinctrl_tsin3_serial: tsin3_serial {
+ st,pins {
+ DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsin4 {
+ pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 {
+ st,pins {
+ DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+ ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+ PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsin5 {
+ pinctrl_tsin5_serial_alt1: tsin5_serial_alt1 {
+ st,pins {
+ DATA7 = <&pio18 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio18 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio18 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio18 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio18 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ pinctrl_tsin5_serial_alt2: tsin5_serial_alt2 {
+ st,pins {
+ DATA7 = <&pio19 4 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio19 3 ALT2 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio19 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio19 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio19 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsout0 {
+ pinctrl_tsout0_parallel: tsout0_parallel {
+ st,pins {
+ DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+ VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ pinctrl_tsout0_serial: tsout0_serial {
+ st,pins {
+ DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+ VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsout1 {
+ pinctrl_tsout1_serial: tsout1_serial {
+ st,pins {
+ DATA7 = <&pio19 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio19 3 ALT1 OUT NICLK 0 CLK_A>;
+ VALID = <&pio19 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio19 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio19 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ mtsin0 {
+ pinctrl_mtsin0_parallel: mtsin0_parallel {
+ st,pins {
+ DATA7 = <&pio10 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA6 = <&pio10 5 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA5 = <&pio10 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA4 = <&pio10 7 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA3 = <&pio11 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA2 = <&pio11 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA1 = <&pio11 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA0 = <&pio11 3 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio10 3 ALT3 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio10 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio10 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio10 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ systrace {
+ pinctrl_systrace_default: systrace-default {
+ st,pins {
+ trc_data0 = <&pio11 3 ALT5 OUT>;
+ trc_data1 = <&pio11 4 ALT5 OUT>;
+ trc_data2 = <&pio11 5 ALT5 OUT>;
+ trc_data3 = <&pio11 6 ALT5 OUT>;
+ trc_clk = <&pio11 7 ALT5 OUT>;
+ };
+ };
+ };
+ };
+
+ pin-controller-front1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-front-pinctrl";
+ st,syscfg = <&syscfg_front>;
+ reg = <0x0921f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+ interrupt-names = "irqmux";
+ ranges = <0 0x09210000 0x10000>;
+
+ pio20: pio@09210000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO20";
+ };
+
+ tsin4 {
+ pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
+ st,pins {
+ DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+ };
+
+ pin-controller-rear {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-rear-pinctrl";
+ st,syscfg = <&syscfg_rear>;
+ reg = <0x0922f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+ interrupt-names = "irqmux";
+ ranges = <0 0x09220000 0x6000>;
+
+ pio30: gpio@09220000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO30";
+ };
+ pio31: gpio@09221000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO31";
+ };
+ pio32: gpio@09222000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO32";
+ };
+ pio33: gpio@09223000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO33";
+ };
+ pio34: gpio@09224000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO34";
+ };
+ pio35: gpio@09225000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO35";
+ st,retime-pin-mask = <0x7f>;
+ };
+
+ dvo {
+ pinctrl_dvo: dvo {
+ st,pins {
+ hs = <&pio30 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ vs = <&pio30 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ de = <&pio30 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ ck = <&pio30 3 ALT2 (OE | CLKNOTDATA) 0>;
+ d0 = <&pio30 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d1 = <&pio30 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d2 = <&pio30 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d3 = <&pio30 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d4 = <&pio31 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d5 = <&pio31 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d6 = <&pio31 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d7 = <&pio31 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d8 = <&pio31 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d9 = <&pio31 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d10 = <&pio31 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d11 = <&pio31 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d12 = <&pio32 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d13 = <&pio32 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d14 = <&pio32 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d15 = <&pio32 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d16 = <&pio32 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d17 = <&pio32 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d18 = <&pio32 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d19 = <&pio32 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d20 = <&pio33 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d21 = <&pio33 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d22 = <&pio33 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ d23 = <&pio33 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ i2c4 {
+ pinctrl_i2c4_default: i2c4-default {
+ st,pins {
+ sda = <&pio30 1 ALT1 BIDIR>;
+ scl = <&pio30 0 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ i2c5 {
+ pinctrl_i2c5_default: i2c5-default {
+ st,pins {
+ sda = <&pio34 4 ALT1 BIDIR>;
+ scl = <&pio34 3 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ usb3 {
+ pinctrl_usb3: usb3-2 {
+ st,pins {
+ usb-oc-detect = <&pio35 4 ALT1 IN>;
+ usb-pwr-enable = <&pio35 5 ALT1 OUT>;
+ usb-vbus-valid = <&pio35 6 ALT1 IN>;
+ };
+ };
+ };
+
+ pwm0 {
+ pinctrl_pwm0_chan0_default: pwm0-0-default {
+ st,pins {
+ pwm-capturein = <&pio31 0 ALT1 IN>;
+ pwm-out = <&pio31 1 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi4 {
+ pinctrl_spi4_default: spi4-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio30 1 ALT1 OUT>;
+ mrst = <&pio30 2 ALT1 IN>;
+ scl = <&pio30 0 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio30 1 ALT1 BIDIR_PU>;
+ scl = <&pio30 0 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
+ st,pins {
+ mtsr = <&pio34 1 ALT3 OUT>;
+ mrst = <&pio34 2 ALT3 IN>;
+ scl = <&pio34 0 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
+ st,pins {
+ mtsr = <&pio34 1 ALT3 BIDIR_PU>;
+ scl = <&pio34 0 ALT3 OUT>;
+ };
+ };
+ };
+
+ i2s_out {
+ pinctrl_i2s_8ch_out: i2s_8ch_out{
+ st,pins {
+ mclk = <&pio33 5 ALT1 OUT>;
+ lrclk = <&pio33 7 ALT1 OUT>;
+ sclk = <&pio33 6 ALT1 OUT>;
+ data0 = <&pio33 4 ALT1 OUT>;
+ data1 = <&pio34 0 ALT1 OUT>;
+ data2 = <&pio34 1 ALT1 OUT>;
+ data3 = <&pio34 2 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_i2s_2ch_out: i2s_2ch_out{
+ st,pins {
+ mclk = <&pio33 5 ALT1 OUT>;
+ lrclk = <&pio33 7 ALT1 OUT>;
+ sclk = <&pio33 6 ALT1 OUT>;
+ data0 = <&pio33 4 ALT1 OUT>;
+ };
+ };
+ };
+
+ i2s_in {
+ pinctrl_i2s_8ch_in: i2s_8ch_in{
+ st,pins {
+ mclk = <&pio32 5 ALT1 IN>;
+ lrclk = <&pio32 7 ALT1 IN>;
+ sclk = <&pio32 6 ALT1 IN>;
+ data0 = <&pio32 4 ALT1 IN>;
+ data1 = <&pio33 0 ALT1 IN>;
+ data2 = <&pio33 1 ALT1 IN>;
+ data3 = <&pio33 2 ALT1 IN>;
+ data4 = <&pio33 3 ALT1 IN>;
+ };
+ };
+
+ pinctrl_i2s_2ch_in: i2s_2ch_in{
+ st,pins {
+ mclk = <&pio32 5 ALT1 IN>;
+ lrclk = <&pio32 7 ALT1 IN>;
+ sclk = <&pio32 6 ALT1 IN>;
+ data0 = <&pio32 4 ALT1 IN>;
+ };
+ };
+ };
+
+ spdif_out {
+ pinctrl_spdif_out: spdif_out{
+ st,pins {
+ spdif_out = <&pio34 7 ALT1 OUT>;
+ };
+ };
+ };
+
+ serial3 {
+ pinctrl_serial3: serial3-0 {
+ st,pins {
+ tx = <&pio31 3 ALT1 OUT>;
+ rx = <&pio31 4 ALT1 IN>;
+ };
+ };
+ };
+ };
+
+ pin-controller-flash {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-flash-pinctrl";
+ st,syscfg = <&syscfg_flash>;
+ reg = <0x0923f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
+ interrupts-names = "irqmux";
+ ranges = <0 0x09230000 0x3000>;
+
+ pio40: gpio@09230000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO40";
+ };
+ pio41: gpio@09231000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO41";
+ };
+ pio42: gpio@09232000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO42";
+ };
+
+ mmc0 {
+ pinctrl_mmc0: mmc0-0 {
+ st,pins {
+ emmc_clk = <&pio40 6 ALT1 BIDIR>;
+ emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+ emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
+ emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
+ emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
+ emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
+ emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
+ emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
+ emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
+ emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
+ };
+ };
+ pinctrl_sd0: sd0-0 {
+ st,pins {
+ sd_clk = <&pio40 6 ALT1 BIDIR>;
+ sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+ sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
+ sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
+ sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
+ sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
+ sd_led = <&pio42 0 ALT2 OUT>;
+ sd_pwren = <&pio42 2 ALT2 OUT>;
+ sd_vsel = <&pio42 3 ALT2 OUT>;
+ sd_cd = <&pio42 4 ALT2 IN>;
+ sd_wp = <&pio42 5 ALT2 IN>;
+ };
+ };
+ };
+
+ fsm {
+ pinctrl_fsm: fsm {
+ st,pins {
+ spi-fsm-clk = <&pio40 1 ALT1 OUT>;
+ spi-fsm-cs = <&pio40 0 ALT1 OUT>;
+ spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
+ spi-fsm-miso = <&pio40 3 ALT1 IN>;
+ spi-fsm-hol = <&pio40 5 ALT1 OUT>;
+ spi-fsm-wp = <&pio40 4 ALT1 OUT>;
+ };
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand {
+ st,pins {
+ nand_cs1 = <&pio40 6 ALT3 OUT>;
+ nand_cs0 = <&pio40 7 ALT3 OUT>;
+ nand_d0 = <&pio41 0 ALT3 BIDIR>;
+ nand_d1 = <&pio41 1 ALT3 BIDIR>;
+ nand_d2 = <&pio41 2 ALT3 BIDIR>;
+ nand_d3 = <&pio41 3 ALT3 BIDIR>;
+ nand_d4 = <&pio41 4 ALT3 BIDIR>;
+ nand_d5 = <&pio41 5 ALT3 BIDIR>;
+ nand_d6 = <&pio41 6 ALT3 BIDIR>;
+ nand_d7 = <&pio41 7 ALT3 BIDIR>;
+ nand_we = <&pio42 0 ALT3 OUT>;
+ nand_dqs = <&pio42 1 ALT3 OUT>;
+ nand_ale = <&pio42 2 ALT3 OUT>;
+ nand_cle = <&pio42 3 ALT3 OUT>;
+ nand_rnb = <&pio42 4 ALT3 IN>;
+ nand_oe = <&pio42 5 ALT3 OUT>;
+ };
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
+ * Author: Patrice Chotard <patrice.chotard@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "STiH410 B2260";
+ compatible = "st,stih410-b2260", "st,stih410";
+
+ chosen {
+ bootargs = "console=ttyAS1,115200";
+ linux,stdout-path = &uart1;
+ stdout-path = &uart1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x40000000>;
+ };
+
+ aliases {
+ ttyAS1 = &uart1;
+ ethernet0 = ðernet0;
+ };
+
+ soc {
+
+ leds {
+ compatible = "gpio-leds";
+ user_green_1 {
+ label = "User_green_1";
+ gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ user_green_2 {
+ label = "User_green_2";
+ gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ user_green_3 {
+ label = "User_green_3";
+ gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ user_green_4 {
+ label = "User_green_4";
+ gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wifi_yellow {
+ label = "Wifi_yellow";
+ gpios = <&pio4 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "wifi-activity";
+ default-state = "off";
+ };
+
+ bt_blue {
+ label = "Bluetooth_blue";
+ gpios = <&pio3 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "hci0-power";
+ default-state = "off";
+ };
+ };
+
+ /* Low speed expansion connector */
+ uart0: serial@9830000 {
+ label = "LS-UART0";
+ status = "okay";
+ };
+
+ /* Low speed expansion connector */
+ uart1: serial@9831000 {
+ label = "LS-UART1";
+ status = "okay";
+ };
+
+ /* Low speed expansion connector */
+ spi0: spi@9844000 {
+ label = "LS-SPI0";
+ cs-gpios = <&pio30 3 0>;
+ status = "okay";
+ };
+
+ /* Low speed expansion connector */
+ i2c0: i2c@9840000 {
+ label = "LS-I2C0";
+ status = "okay";
+ };
+
+ /* Low speed expansion connector */
+ i2c1: i2c@9841000 {
+ label = "LS-I2C1";
+ status = "okay";
+ };
+
+ /* high speed expansion connector */
+ i2c2: i2c@9842000 {
+ label = "HS-I2C2";
+ pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
+ status = "okay";
+ };
+
+ /* high speed expansion connector */
+ i2c3: i2c@9843000 {
+ label = "HS-I2C3";
+ pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
+ status = "okay";
+ };
+
+ mmc0: sdhci@09060000 {
+ pinctrl-0 = <&pinctrl_sd0>;
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ /* high speed expansion connector */
+ mmc1: sdhci@09080000 {
+ status = "okay";
+ };
+
+ pwm0: pwm@9810000 {
+ status = "okay";
+ };
+
+ pwm1: pwm@9510000 {
+ status = "okay";
+ };
+
+ usb2_picophy1: phy2 {
+ status = "okay";
+ };
+
+ usb2_picophy2: phy3 {
+ status = "okay";
+ };
+
+ ohci0: usb@9a03c00 {
+ status = "okay";
+ };
+
+ ehci0: usb@9a03e00 {
+ status = "okay";
+ };
+
+ ohci1: usb@9a83c00 {
+ status = "okay";
+ };
+
+ ehci1: usb@9a83e00 {
+ status = "okay";
+ };
+
+ st_dwc3: dwc3@8f94000 {
+ status = "okay";
+ };
+
+ ethernet0: dwmac@9630000 {
+ phy-mode = "rgmii";
+ pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
+
+ snps,phy-bus-name = "stmmac";
+ snps,phy-bus-id = <0>;
+ snps,phy-addr = <0>;
+ snps,reset-gpio = <&pio0 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+
+ status = "okay";
+ };
+
+ sti_uni_player0: sti-uni-player@8d80000 {
+ status = "okay";
+ };
+
+ /* SSC11 to HDMI */
+ hdmiddc: i2c@9541000 {
+ /* HDMI V1.3a supports Standard mode only */
+ clock-frequency = <100000>;
+ st,i2c-min-scl-pulse-width-us = <0>;
+ st,i2c-min-sda-pulse-width-us = <1>;
+ status = "okay";
+ };
+
+ miphy28lp_phy: miphy28lp@9b22000 {
+ phy_port1: port@9b2a000 {
+ st,osc-force-ext;
+ };
+ };
+
+ sata1: sata@9b28000 {
+ status = "okay";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "STI-B2260";
+ status = "okay";
+
+ simple-audio-card,dai-link@0 {
+ /* DAC */
+ format = "i2s";
+ mclk-fs = <128>;
+ cpu {
+ sound-dai = <&sti_uni_player0>;
+ };
+
+ codec {
+ sound-dai = <&sti_hdmi>;
+ };
+ };
+ };
+
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <dt-bindings/clock/stih410-clks.h>
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ compatible = "st,stih410-clk", "simple-bus";
+
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ clk_sysin: clk-sysin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ clock-output-names = "CLK_SYSIN";
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * A9 PLL.
+ */
+ clockgen-a9@92b0000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x92b0000 0xffff>;
+
+ clockgen_a9_pll: clockgen-a9-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-clkgen-plla9";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clockgen-a9-pll-odf";
+ };
+ };
+
+ /*
+ * ARM CPU related clocks.
+ */
+ clk_m_a9: clk-m-a9@92b0000 {
+ #clock-cells = <0>;
+ compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+ reg = <0x92b0000 0x10000>;
+
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_s_c0_flexgen 13>;
+
+ clock-output-names = "clk-m-a9-ext2f-div2";
+
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ clk_ext2f_a9: clockgen-c0@13 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ clock-output-names = "clk-s-icn-reg-0";
+ };
+
+ clockgen-a@090ff000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x90ff000 0x1000>;
+
+ clk_s_a0_pll: clk-s-a0-pll {
+ #clock-cells = <1>;
+ compatible = "st,clkgen-pll0";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-pll-ofd-0";
+ clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
+ };
+
+ clk_s_a0_flexgen: clk-s-a0-flexgen {
+ compatible = "st,flexgen";
+
+ #clock-cells = <1>;
+
+ clocks = <&clk_s_a0_pll 0>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-ic-lmi0",
+ "clk-ic-lmi1";
+ clock-critical = <CLK_IC_LMI0>;
+ };
+ };
+
+ clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-pll";
+ reg = <0x9103000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-fs0-ch0",
+ "clk-s-c0-fs0-ch1",
+ "clk-s-c0-fs0-ch2",
+ "clk-s-c0-fs0-ch3";
+ clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
+ };
+
+ clk_s_c0: clockgen-c@09103000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9103000 0x1000>;
+
+ clk_s_c0_pll0: clk-s-c0-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,clkgen-pll0";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll0-odf-0";
+ clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
+ };
+
+ clk_s_c0_pll1: clk-s-c0-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,clkgen-pll1";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll1-odf-0";
+ };
+
+ clk_s_c0_flexgen: clk-s-c0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_c0_pll0 0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_quadfs 0>,
+ <&clk_s_c0_quadfs 1>,
+ <&clk_s_c0_quadfs 2>,
+ <&clk_s_c0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-icn-gpu",
+ "clk-fdma",
+ "clk-nand",
+ "clk-hva",
+ "clk-proc-stfe",
+ "clk-proc-tp",
+ "clk-rx-icn-dmu",
+ "clk-rx-icn-hva",
+ "clk-icn-cpu",
+ "clk-tx-icn-dmu",
+ "clk-mmc-0",
+ "clk-mmc-1",
+ "clk-jpegdec",
+ "clk-ext2fa9",
+ "clk-ic-bdisp-0",
+ "clk-ic-bdisp-1",
+ "clk-pp-dmu",
+ "clk-vid-dmu",
+ "clk-dss-lpc",
+ "clk-st231-aud-0",
+ "clk-st231-gp-1",
+ "clk-st231-dmu",
+ "clk-icn-lmi",
+ "clk-tx-icn-disp-1",
+ "clk-icn-sbc",
+ "clk-stfe-frc2",
+ "clk-eth-phy",
+ "clk-eth-ref-phyclk",
+ "clk-flash-promip",
+ "clk-main-disp",
+ "clk-aux-disp",
+ "clk-compo-dvp",
+ "clk-tx-icn-hades",
+ "clk-rx-icn-hades",
+ "clk-icn-reg-16",
+ "clk-pp-hades",
+ "clk-clust-hades",
+ "clk-hwpe-hades",
+ "clk-fc-hades";
+ clock-critical = <CLK_ICN_CPU>,
+ <CLK_TX_ICN_DMU>,
+ <CLK_EXT2F_A9>,
+ <CLK_ICN_LMI>,
+ <CLK_ICN_SBC>;
+ };
+ };
+
+ clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+ #clock-cells = <1>;
+ compatible = "st,quadfs";
+ reg = <0x9104000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d0-fs0-ch0",
+ "clk-s-d0-fs0-ch1",
+ "clk-s-d0-fs0-ch2",
+ "clk-s-d0-fs0-ch3";
+ };
+
+ clockgen-d0@09104000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9104000 0x1000>;
+
+ clk_s_d0_flexgen: clk-s-d0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen-audio", "st,flexgen";
+
+ clocks = <&clk_s_d0_quadfs 0>,
+ <&clk_s_d0_quadfs 1>,
+ <&clk_s_d0_quadfs 2>,
+ <&clk_s_d0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-pcm-0",
+ "clk-pcm-1",
+ "clk-pcm-2",
+ "clk-spdiff",
+ "clk-pcmr10-master",
+ "clk-usb2-phy";
+ };
+ };
+
+ clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+ #clock-cells = <1>;
+ compatible = "st,quadfs";
+ reg = <0x9106000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d2-fs0-ch0",
+ "clk-s-d2-fs0-ch1",
+ "clk-s-d2-fs0-ch2",
+ "clk-s-d2-fs0-ch3";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ clockgen-d2@x9106000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9106000 0x1000>;
+
+ clk_s_d2_flexgen: clk-s-d2-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen-video", "st,flexgen";
+
+ clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>,
+ <&clk_s_d2_quadfs 2>,
+ <&clk_s_d2_quadfs 3>,
+ <&clk_sysin>,
+ <&clk_sysin>,
+ <&clk_tmdsout_hdmi>;
+
+ clock-output-names = "clk-pix-main-disp",
+ "clk-pix-pip",
+ "clk-pix-gdp1",
+ "clk-pix-gdp2",
+ "clk-pix-gdp3",
+ "clk-pix-gdp4",
+ "clk-pix-aux-disp",
+ "clk-denc",
+ "clk-pix-hddac",
+ "clk-hddac",
+ "clk-sddac",
+ "clk-pix-dvo",
+ "clk-dvo",
+ "clk-pix-hdmi",
+ "clk-tmds-hdmi",
+ "clk-ref-hdmiphy";
+ };
+ };
+
+ clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+ #clock-cells = <1>;
+ compatible = "st,quadfs";
+ reg = <0x9107000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d3-fs0-ch0",
+ "clk-s-d3-fs0-ch1",
+ "clk-s-d3-fs0-ch2",
+ "clk-s-d3-fs0-ch3";
+ };
+
+ clockgen-d3@9107000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9107000 0x1000>;
+
+ clk_s_d3_flexgen: clk-s-d3-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d3_quadfs 0>,
+ <&clk_s_d3_quadfs 1>,
+ <&clk_s_d3_quadfs 2>,
+ <&clk_s_d3_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-stfe-frc1",
+ "clk-tsout-0",
+ "clk-tsout-1",
+ "clk-mchi",
+ "clk-vsens-compo",
+ "clk-frc1-remote",
+ "clk-lpc-0",
+ "clk-lpc-1";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+/ {
+
+ soc {
+ pin-controller-rear {
+
+ usb0 {
+ pinctrl_usb0: usb2-0 {
+ st,pins {
+ usb-oc-detect = <&pio35 0 ALT1 IN>;
+ usb-pwr-enable = <&pio35 1 ALT1 OUT>;
+ };
+ };
+ };
+
+ usb1 {
+ pinctrl_usb1: usb2-1 {
+ st,pins {
+ usb-oc-detect = <&pio35 2 ALT1 IN>;
+ usb-pwr-enable = <&pio35 3 ALT1 OUT>;
+ };
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih410-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stih410-pinctrl.dtsi"
+/ {
+ aliases {
+ bdisp0 = &bdisp0;
+ };
+
+ cpus {
+ cpu@0 {
+ st,syscfg = <&syscfg_core 0x8e0>;
+ st,syscfg-eng = <&syscfg_opp 0x4 0x0>;
+ clocks = <&clk_m_a9>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ cpu@1 {
+ clocks = <&clk_m_a9>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@1500000000 {
+ opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
+ opp-hz = /bits/ 64 <1500000000>;
+ clock-latency-ns = <10000000>;
+ opp-suspend;
+ };
+ opp@1200000000 {
+ opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
+ opp-hz = /bits/ 64 <1200000000>;
+ clock-latency-ns = <10000000>;
+ };
+ opp@800000000 {
+ opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
+ opp-hz = /bits/ 64 <800000000>;
+ clock-latency-ns = <10000000>;
+ };
+ opp@400000000 {
+ opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
+ opp-hz = /bits/ 64 <400000000>;
+ clock-latency-ns = <10000000>;
+ };
+ };
+
+ soc {
+ syscfg_opp: @08a6583c {
+ compatible = "syscon";
+ reg = <0x08a6583c 0x8>;
+ };
+
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+
+ status = "disabled";
+ };
+
+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
+
+ status = "disabled";
+ };
+
+ ohci0: usb@9a03c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0x9a03c00 0x100>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+ <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy1>;
+ phy-names = "usb";
+
+ status = "disabled";
+ };
+
+ ehci0: usb@9a03e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0x9a03e00 0x100>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+ <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy1>;
+ phy-names = "usb";
+
+ status = "disabled";
+ };
+
+ ohci1: usb@9a83c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0x9a83c00 0x100>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+ <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy2>;
+ phy-names = "usb";
+
+ status = "disabled";
+ };
+
+ ehci1: usb@9a83e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0x9a83e00 0x100>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+ <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy2>;
+ phy-names = "usb";
+
+ status = "disabled";
+ };
+
+ sti-display-subsystem {
+ compatible = "st,sti-display-subsystem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ assigned-clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+ <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP4>;
+
+ assigned-clock-parents = <0>,
+ <0>,
+ <0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>;
+
+ assigned-clock-rates = <297000000>,
+ <297000000>,
+ <0>,
+ <400000000>,
+ <400000000>;
+
+ ranges;
+
+ sti-compositor@9d11000 {
+ compatible = "st,stih407-compositor";
+ reg = <0x9d11000 0x1000>;
+
+ clock-names = "compo_main",
+ "compo_aux",
+ "pix_main",
+ "pix_aux",
+ "pix_gdp1",
+ "pix_gdp2",
+ "pix_gdp3",
+ "pix_gdp4",
+ "main_parent",
+ "aux_parent";
+
+ clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+ <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+ <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP4>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+
+ reset-names = "compo-main", "compo-aux";
+ resets = <&softreset STIH407_COMPO_SOFTRESET>,
+ <&softreset STIH407_COMPO_SOFTRESET>;
+ st,vtg = <&vtg_main>, <&vtg_aux>;
+ };
+
+ sti-tvout@8d08000 {
+ compatible = "st,stih407-tvout";
+ reg = <0x8d08000 0x1000>;
+ reg-names = "tvout-reg";
+ reset-names = "tvout";
+ resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+ <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+ <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+ <&clk_s_d0_flexgen CLK_PCM_0>,
+ <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+ <&clk_s_d2_flexgen CLK_HDDAC>;
+
+ assigned-clock-parents = <&clk_s_d2_quadfs 0>,
+ <&clk_tmdsout_hdmi>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d0_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>;
+ };
+
+ sti_hdmi: sti-hdmi@8d04000 {
+ compatible = "st,stih407-hdmi";
+ #sound-dai-cells = <0>;
+ reg = <0x8d04000 0x1000>;
+ reg-names = "hdmi-reg";
+ interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+ interrupt-names = "irq";
+ clock-names = "pix",
+ "tmds",
+ "phy",
+ "audio",
+ "main_parent",
+ "aux_parent";
+
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+ <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+ <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+ <&clk_s_d0_flexgen CLK_PCM_0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+
+ hdmi,hpd-gpio = <&pio5 3>;
+ reset-names = "hdmi";
+ resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+ ddc = <&hdmiddc>;
+ };
+
+ sti-hda@8d02000 {
+ compatible = "st,stih407-hda";
+ status = "disabled";
+ reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+ reg-names = "hda-reg", "video-dacs-ctrl";
+ clock-names = "pix",
+ "hddac",
+ "main_parent",
+ "aux_parent";
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+ <&clk_s_d2_flexgen CLK_HDDAC>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+ };
+
+ sti-dvo@8d00400 {
+ compatible = "st,stih407-dvo";
+ status = "disabled";
+ reg = <0x8d00400 0x200>;
+ reg-names = "dvo-reg";
+ clock-names = "dvo_pix",
+ "dvo",
+ "main_parent",
+ "aux_parent";
+ clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>,
+ <&clk_s_d2_flexgen CLK_DVO>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dvo>;
+ };
+
+ sti-hqvdp@9c000000 {
+ compatible = "st,stih407-hqvdp";
+ reg = <0x9C00000 0x100000>;
+ clock-names = "hqvdp", "pix_main";
+ clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
+ reset-names = "hqvdp";
+ resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
+ st,vtg = <&vtg_main>;
+ };
+ };
+
+ bdisp0:bdisp@9f10000 {
+ compatible = "st,stih407-bdisp";
+ reg = <0x9f10000 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
+ clock-names = "bdisp";
+ clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
+ };
+
+ hva@8c85000 {
+ compatible = "st,st-hva";
+ reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
+ reg-names = "hva_registers", "hva_esram";
+ interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
+ <GIC_SPI 59 IRQ_TYPE_NONE>;
+ clock-names = "clk_hva";
+ clocks = <&clk_s_c0_flexgen CLK_HVA>;
+ };
+
+ thermal@91a0000 {
+ compatible = "st,stih407-thermal";
+ reg = <0x91a0000 0x28>;
+ clock-names = "thermal";
+ clocks = <&clk_sysin>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ g1@8c80000 {
+ compatible = "st,g1";
+ reg = <0x8c80000 0x194>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
+ };
+
+ temp0{
+ compatible = "st,stih407-thermal";
+ reg = <0x91a0000 0x28>;
+ clock-names = "thermal";
+ clocks = <&clk_sysin>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ delta0 {
+ compatible = "st,delta";
+ clock-names = "delta", "delta-st231", "delta-flash-promip";
+ clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+ <&clk_s_c0_flexgen CLK_ST231_DMU>,
+ <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+ };
+
+ h264pp0: h264pp@8c00000 {
+ compatible = "st,h264pp";
+ reg = <0x8c00000 0x20000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
+ clock-names = "clk_h264pp_0";
+ clocks = <&clk_s_c0_flexgen CLK_PP_DMU>;
+ };
+
+ mali: mali@09f00000 {
+ compatible = "arm,mali-400";
+ reg = <0x09f00000 0x10000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_NONE>,
+ <GIC_SPI 50 IRQ_TYPE_NONE>,
+ <GIC_SPI 41 IRQ_TYPE_NONE>,
+ <GIC_SPI 45 IRQ_TYPE_NONE>,
+ <GIC_SPI 42 IRQ_TYPE_NONE>,
+ <GIC_SPI 46 IRQ_TYPE_NONE>,
+ <GIC_SPI 43 IRQ_TYPE_NONE>,
+ <GIC_SPI 47 IRQ_TYPE_NONE>,
+ <GIC_SPI 44 IRQ_TYPE_NONE>,
+ <GIC_SPI 48 IRQ_TYPE_NONE>;
+ interrupt-names = "IRQGP",
+ "IRQGPMMU",
+ "IRQPP0",
+ "IRQPPMMU0",
+ "IRQPP1",
+ "IRQPPMMU1",
+ "IRQPP2",
+ "IRQPPMMU2",
+ "IRQPP3",
+ "IRQPPMMU3";
+ clock-names = "gpu-clk";
+ clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
+ reset-names = "gpu";
+ resets = <&softreset STIH407_GPU_SOFTRESET>;
+ };
+
+ delta0 {
+ compatible = "st,st-delta";
+ clock-names = "delta",
+ "delta-st231",
+ "delta-flash-promip";
+ clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+ <&clk_s_c0_flexgen CLK_ST231_DMU>,
+ <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+ };
+
+ h264pp0: h264pp@8c00000 {
+ compatible = "st,h264pp";
+ reg = <0x8c00000 0x20000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
+ clock-names = "clk_h264pp_0";
+ clocks = <&clk_s_c0_flexgen CLK_PP_DMU>;
+ };
+
+ mali: mali@09f00000 {
+ compatible = "arm,mali-400";
+ reg = <0x09f00000 0x10000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_NONE>,
+ <GIC_SPI 50 IRQ_TYPE_NONE>,
+ <GIC_SPI 41 IRQ_TYPE_NONE>,
+ <GIC_SPI 45 IRQ_TYPE_NONE>,
+ <GIC_SPI 42 IRQ_TYPE_NONE>,
+ <GIC_SPI 46 IRQ_TYPE_NONE>,
+ <GIC_SPI 43 IRQ_TYPE_NONE>,
+ <GIC_SPI 47 IRQ_TYPE_NONE>,
+ <GIC_SPI 44 IRQ_TYPE_NONE>,
+ <GIC_SPI 48 IRQ_TYPE_NONE>;
+ interrupt-names = "IRQGP",
+ "IRQGPMMU",
+ "IRQPP0",
+ "IRQPPMMU0",
+ "IRQPP1",
+ "IRQPPMMU1",
+ "IRQPP2",
+ "IRQPPMMU2",
+ "IRQPP3",
+ "IRQPPMMU3";
+ clock-names = "gpu-clk";
+ clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
+ reset-names = "gpu";
+ resets = <&softreset STIH407_GPU_SOFTRESET>;
+ };
+
+ hva@8c85000{
+ compatible = "st,st-hva";
+ reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
+ reg-names = "hva_registers", "hva_esram";
+ interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
+ <GIC_SPI 59 IRQ_TYPE_NONE>;
+ clock-names = "clk_hva";
+ clocks = <&clk_s_c0_flexgen CLK_HVA>;
+ };
+ };
+};
config MMC_SDHCI_STI
bool "SDHCI support for STMicroelectronics SoC"
- depends on MMC_SDHCI
+ depends on MMC_SDHCI && OF_CONTROL
help
This selects the Secure Digital Host Controller Interface (SDHCI)
on STMicroelectronics STiH410 SoC.
--- /dev/null
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH407 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH407
+#define _DT_BINDINGS_CLK_STIH407
+
+/* CLOCKGEN A0 */
+#define CLK_IC_LMI0 0
+#define CLK_IC_LMI1 1
+
+/* CLOCKGEN C0 */
+#define CLK_ICN_GPU 0
+#define CLK_FDMA 1
+#define CLK_NAND 2
+#define CLK_HVA 3
+#define CLK_PROC_STFE 4
+#define CLK_PROC_TP 5
+#define CLK_RX_ICN_DMU 6
+#define CLK_RX_ICN_DISP_0 6
+#define CLK_RX_ICN_DISP_1 6
+#define CLK_RX_ICN_HVA 7
+#define CLK_RX_ICN_TS 7
+#define CLK_ICN_CPU 8
+#define CLK_TX_ICN_DMU 9
+#define CLK_TX_ICN_HVA 9
+#define CLK_TX_ICN_TS 9
+#define CLK_ICN_COMPO 9
+#define CLK_MMC_0 10
+#define CLK_MMC_1 11
+#define CLK_JPEGDEC 12
+#define CLK_ICN_REG 13
+#define CLK_TRACE_A9 13
+#define CLK_PTI_STM 13
+#define CLK_EXT2F_A9 13
+#define CLK_IC_BDISP_0 14
+#define CLK_IC_BDISP_1 15
+#define CLK_PP_DMU 16
+#define CLK_VID_DMU 17
+#define CLK_DSS_LPC 18
+#define CLK_ST231_AUD_0 19
+#define CLK_ST231_GP_0 19
+#define CLK_ST231_GP_1 20
+#define CLK_ST231_DMU 21
+#define CLK_ICN_LMI 22
+#define CLK_TX_ICN_DISP_0 23
+#define CLK_TX_ICN_DISP_1 23
+#define CLK_ICN_SBC 24
+#define CLK_STFE_FRC2 25
+#define CLK_ETH_PHY 26
+#define CLK_ETH_REF_PHYCLK 27
+#define CLK_FLASH_PROMIP 28
+#define CLK_MAIN_DISP 29
+#define CLK_AUX_DISP 30
+#define CLK_COMPO_DVP 31
+
+/* CLOCKGEN D0 */
+#define CLK_PCM_0 0
+#define CLK_PCM_1 1
+#define CLK_PCM_2 2
+#define CLK_SPDIFF 3
+
+/* CLOCKGEN D2 */
+#define CLK_PIX_MAIN_DISP 0
+#define CLK_PIX_PIP 1
+#define CLK_PIX_GDP1 2
+#define CLK_PIX_GDP2 3
+#define CLK_PIX_GDP3 4
+#define CLK_PIX_GDP4 5
+#define CLK_PIX_AUX_DISP 6
+#define CLK_DENC 7
+#define CLK_PIX_HDDAC 8
+#define CLK_HDDAC 9
+#define CLK_SDDAC 10
+#define CLK_PIX_DVO 11
+#define CLK_DVO 12
+#define CLK_PIX_HDMI 13
+#define CLK_TMDS_HDMI 14
+#define CLK_REF_HDMIPHY 15
+
+/* CLOCKGEN D3 */
+#define CLK_STFE_FRC1 0
+#define CLK_TSOUT_0 1
+#define CLK_TSOUT_1 2
+#define CLK_MCHI 3
+#define CLK_VSENS_COMPO 4
+#define CLK_FRC1_REMOTE 5
+#define CLK_LPC_0 6
+#define CLK_LPC_1 7
+#endif
--- /dev/null
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH410 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH410
+#define _DT_BINDINGS_CLK_STIH410
+
+#include "stih407-clks.h"
+
+/* STiH410 introduces new clock outputs compared to STiH407 */
+
+/* CLOCKGEN C0 */
+#define CLK_TX_ICN_HADES 32
+#define CLK_RX_ICN_HADES 33
+#define CLK_ICN_REG_16 34
+#define CLK_PP_HADES 35
+#define CLK_CLUST_HADES 36
+#define CLK_HWPE_HADES 37
+#define CLK_FC_HADES 38
+
+/* CLOCKGEN D0 */
+#define CLK_PCMR10_MASTER 4
+#define CLK_USB2_PHY 5
+
+#endif
--- /dev/null
+/*
+ * include/linux/irqchip/irq-st.h
+ *
+ * Copyright (C) 2014 STMicroelectronics All Rights Reserved
+ *
+ * Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H
+
+#define ST_IRQ_SYSCFG_EXT_0 0
+#define ST_IRQ_SYSCFG_EXT_1 1
+#define ST_IRQ_SYSCFG_EXT_2 2
+#define ST_IRQ_SYSCFG_CTI_0 3
+#define ST_IRQ_SYSCFG_CTI_1 4
+#define ST_IRQ_SYSCFG_PMU_0 5
+#define ST_IRQ_SYSCFG_PMU_1 6
+#define ST_IRQ_SYSCFG_pl310_L2 7
+#define ST_IRQ_SYSCFG_DISABLED 0xFFFFFFFF
+
+#define ST_IRQ_SYSCFG_EXT_1_INV 0x1
+#define ST_IRQ_SYSCFG_EXT_2_INV 0x2
+#define ST_IRQ_SYSCFG_EXT_3_INV 0x4
+
+#endif
--- /dev/null
+/*
+ * This header provides shared DT/Driver defines for ST's LPC device
+ *
+ * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
+ *
+ * Author: Lee Jones <lee.jones@linaro.org> for STMicroelectronics
+ */
+
+#ifndef __DT_BINDINGS_ST_LPC_H__
+#define __DT_BINDINGS_ST_LPC_H__
+
+#define ST_LPC_MODE_RTC 0
+#define ST_LPC_MODE_WDT 1
+#define ST_LPC_MODE_CLKSRC 2
+
+#endif /* __DT_BINDINGS_ST_LPC_H__ */
--- /dev/null
+/*
+ * This header provides constants for the reset controller
+ * based peripheral powerdown requests on the STMicroelectronics
+ * STiH407 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH407
+#define _DT_BINDINGS_RESET_CONTROLLER_STIH407
+
+/* Powerdown requests control 0 */
+#define STIH407_EMISS_POWERDOWN 0
+#define STIH407_NAND_POWERDOWN 1
+
+/* Synp GMAC PowerDown */
+#define STIH407_ETH1_POWERDOWN 2
+
+/* Powerdown requests control 1 */
+#define STIH407_USB3_POWERDOWN 3
+#define STIH407_USB2_PORT1_POWERDOWN 4
+#define STIH407_USB2_PORT0_POWERDOWN 5
+#define STIH407_PCIE1_POWERDOWN 6
+#define STIH407_PCIE0_POWERDOWN 7
+#define STIH407_SATA1_POWERDOWN 8
+#define STIH407_SATA0_POWERDOWN 9
+
+/* Reset defines */
+#define STIH407_ETH1_SOFTRESET 0
+#define STIH407_MMC1_SOFTRESET 1
+#define STIH407_PICOPHY_SOFTRESET 2
+#define STIH407_IRB_SOFTRESET 3
+#define STIH407_PCIE0_SOFTRESET 4
+#define STIH407_PCIE1_SOFTRESET 5
+#define STIH407_SATA0_SOFTRESET 6
+#define STIH407_SATA1_SOFTRESET 7
+#define STIH407_MIPHY0_SOFTRESET 8
+#define STIH407_MIPHY1_SOFTRESET 9
+#define STIH407_MIPHY2_SOFTRESET 10
+#define STIH407_SATA0_PWR_SOFTRESET 11
+#define STIH407_SATA1_PWR_SOFTRESET 12
+#define STIH407_DELTA_SOFTRESET 13
+#define STIH407_BLITTER_SOFTRESET 14
+#define STIH407_HDTVOUT_SOFTRESET 15
+#define STIH407_HDQVDP_SOFTRESET 16
+#define STIH407_VDP_AUX_SOFTRESET 17
+#define STIH407_COMPO_SOFTRESET 18
+#define STIH407_HDMI_TX_PHY_SOFTRESET 19
+#define STIH407_JPEG_DEC_SOFTRESET 20
+#define STIH407_VP8_DEC_SOFTRESET 21
+#define STIH407_GPU_SOFTRESET 22
+#define STIH407_HVA_SOFTRESET 23
+#define STIH407_ERAM_HVA_SOFTRESET 24
+#define STIH407_LPM_SOFTRESET 25
+#define STIH407_KEYSCAN_SOFTRESET 26
+#define STIH407_USB2_PORT0_SOFTRESET 27
+#define STIH407_USB2_PORT1_SOFTRESET 28
+#define STIH407_ST231_AUD_SOFTRESET 29
+#define STIH407_ST231_DMU_SOFTRESET 30
+#define STIH407_ST231_GP0_SOFTRESET 31
+#define STIH407_ST231_GP1_SOFTRESET 32
+
+/* Picophy reset defines */
+#define STIH407_PICOPHY0_RESET 0
+#define STIH407_PICOPHY1_RESET 1
+#define STIH407_PICOPHY2_RESET 2
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH407 */
projects / people / ms / u-boot.git / commitdiff
