#ifdef CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
#define CONFIG_SYS_CLK_FREQ 100000000
#endif
#define CONFIG_CMDLINE_TAG
- #define CONFIG_CMDLINE_EDITING
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_FSL_DEVICE_DISABLE
+ #include <config_distro_defaults.h>
+ #define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0)
+ #include <config_distro_bootcmd.h>
#ifdef CONFIG_LPUART
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
"initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0"
+ "fdt_high=0xffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ BOOTENV \
+ "boot_scripts=ls1021atwr_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm32.itb; " \
+ "bootm $load_addr#ls1021atwr\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size && bootm $load_addr#$board\0"
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
"initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0"
+ "fdt_high=0xffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ BOOTENV \
+ "boot_scripts=ls1021atwr_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm32.itb; " \
+ "bootm $load_addr#ls1021atwr\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size && bootm $load_addr#$board\0"
#endif
+ #undef CONFIG_BOOTCOMMAND
+ #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+ #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run qspi_bootcmd;"
+ #else
+ #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run nor_bootcmd;"
+ #endif
+
+ #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0"
+
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024)
#define CONFIG_FSL_QIXIS /* use common QIXIS code */
#define CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#undef CONFIG_CMDLINE_EDITING
#include <config_distro_defaults.h>
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
+ #ifdef CONFIG_QSPI_BOOT
+ #define MC_INIT_CMD \
+ "mcinitcmd=env exists secureboot && " \
+ "esbc_validate 0x20700000 && " \
+ "esbc_validate 0x20740000;" \
+ "fsl_mc start mc 0x20a00000 0x20e00000 \0"
+ #else
+ #define MC_INIT_CMD \
+ "mcinitcmd=env exists secureboot && " \
+ "esbc_validate 0x580700000 && " \
+ "esbc_validate 0x580740000; " \
+ "fsl_mc start mc 0x580a00000 0x580e00000 \0"
+ #endif
+
/* Initial environment variables */
#undef CONFIG_EXTRA_ENV_SETTINGS
- #ifdef CONFIG_SECURE_BOOT
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "scriptaddr=0x80800000\0" \
- "kernel_addr_r=0x81000000\0" \
- "pxefile_addr_r=0x81000000\0" \
- "fdt_addr_r=0x88000000\0" \
- "ramdisk_addr_r=0x89000000\0" \
- "loadaddr=0x80100000\0" \
- "kernel_addr=0x100000\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x581000000\0" \
- "kernel_load=0xa0000000\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "kernel_start=0x1000000\0" \
+ "kernelheader_start=0x800000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernelheader_addr=0x580800000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "kernelheader_size=0x40000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "mcmemsize=0x40000000\0" \
- "fdtfile=fsl-ls2080a-rdb.dtb\0" \
- "mcinitcmd=esbc_validate 0x580700000;" \
- "esbc_validate 0x580740000;" \
- "fsl_mc start mc 0x580a00000" \
- " 0x580e00000 \0" \
- BOOTENV
- #else
+ "console=ttyAMA0,38400n8\0" \
+ MC_INIT_CMD \
+ BOOTENV \
+ "boot_scripts=ls2088ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls2088ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "bootm $load_addr#ls2088ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_start $kernel_size ; env exists secureboot &&" \
+ "sf read $kernelheader_addr_r $kernelheader_start " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ " bootm $load_addr#$board\0" \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size ; env exists secureboot && " \
+ "cp.b $kernelheader_addr $kernelheader_addr_r " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ "bootm $load_addr#$board\0"
+
+ #undef CONFIG_BOOTCOMMAND
#ifdef CONFIG_QSPI_BOOT
- #define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "scriptaddr=0x80800000\0" \
- "kernel_addr_r=0x81000000\0" \
- "pxefile_addr_r=0x81000000\0" \
- "fdt_addr_r=0x88000000\0" \
- "ramdisk_addr_r=0x89000000\0" \
- "loadaddr=0x80100000\0" \
- "kernel_addr=0x100000\0" \
- "ramdisk_size=0x2000000\0" \
- "fdt_high=0xa0000000\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x21000000\0" \
- "mcmemsize=0x40000000\0" \
- "mcinitcmd=fsl_mc start mc 0x20a00000" \
- " 0x20e00000 \0" \
- BOOTENV
+ /* Try to boot an on-QSPI kernel first, then do normal distro boot */
+ #define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& esbc_validate 0x20780000; " \
+ "env exists mcinitcmd && " \
+ "fsl_mc lazyapply dpl 0x20d00000; " \
+ "run distro_bootcmd;run qspi_bootcmd; " \
+ "env exists secureboot && esbc_halt; "
#else
- #define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "scriptaddr=0x80800000\0" \
- "kernel_addr_r=0x81000000\0" \
- "pxefile_addr_r=0x81000000\0" \
- "fdt_addr_r=0x88000000\0" \
- "ramdisk_addr_r=0x89000000\0" \
- "loadaddr=0x80100000\0" \
- "kernel_addr=0x100000\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
- "fdt_high=0xa0000000\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x581000000\0" \
- "kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
- "mcmemsize=0x40000000\0" \
- "fdtfile=fsl-ls2080a-rdb.dtb\0" \
- "mcinitcmd=fsl_mc start mc 0x580a00000" \
- " 0x580e00000 \0" \
- BOOTENV
- #endif
+ /* Try to boot an on-NOR kernel first, then do normal distro boot */
+ #define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& esbc_validate 0x580780000; env exists mcinitcmd "\
+ "&& fsl_mc lazyapply dpl 0x580d00000;" \
+ "run distro_bootcmd;run nor_bootcmd; " \
+ "env exists secureboot && esbc_halt; "
#endif
-
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0600 " \
"ramdisk_size=0x2000000 default_hugepagesz=2m" \
" hugepagesz=2m hugepages=256"
- #undef CONFIG_BOOTCOMMAND
- #ifdef CONFIG_QSPI_BOOT
- /* Try to boot an on-QSPI kernel first, then do normal distro boot */
- #define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x20d00000" \
- " && bootm $kernel_start" \
- " || run distro_bootcmd"
- #else
- /* Try to boot an on-NOR kernel first, then do normal distro boot */
- #define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \
- " && cp.b $kernel_start $kernel_load $kernel_size" \
- " && bootm $kernel_load" \
- " || run distro_bootcmd"
- #endif
-
/* MAC/PHY configuration */
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_PHYLIB_10G
projects / people / ms / u-boot.git / commitdiff
