Peter Tyser <ptyser@xes-inc.com>
- XPEDITE1000 PPC440GX
- XPEDITE5170 MPC8640
- XPEDITE5200 MPC8548
- XPEDITE5370 MPC8572
+ xpedite1000 PPC440GX
+ xpedite5170 MPC8640
+ xpedite5200 MPC8548
+ xpedite5370 MPC8572
+ xpedite5500 P2020
David Updegraff <dave@cray.com>
COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o
COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o
COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o
+COBJS-$(CONFIG_P2020) += fsl_8xxx_clk.o
COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o
+COBJS-$(CONFIG_FSL_DDR3) += fsl_8xxx_ddr.o
+COBJS-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o
+COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o
COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
--- /dev/null
+/*
+ * Copyright 2009 Extreme Engineering Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include "fsl_8xxx_misc.h"
+
+int checkboard(void)
+{
+ char name[] = CONFIG_SYS_BOARD_NAME;
+ char *s;
+
+#ifdef CONFIG_SYS_FORM_CUSTOM
+ s = "Custom";
+#elif CONFIG_SYS_FORM_6U_CPCI
+ s = "6U CompactPCI";
+#elif CONFIG_SYS_FORM_ATCA_PMC
+ s = "ATCA w/PMC";
+#elif CONFIG_SYS_FORM_ATCA_AMC
+ s = "ATCA w/AMC";
+#elif CONFIG_SYS_FORM_VME
+ s = "VME";
+#elif CONFIG_SYS_FORM_6U_VPX
+ s = "6U VPX";
+#elif CONFIG_SYS_FORM_PMC
+ s = "PMC";
+#elif CONFIG_SYS_FORM_PCI
+ s = "PCI";
+#elif CONFIG_SYS_FORM_3U_CPCI
+ s = "3U CompactPCI";
+#elif CONFIG_SYS_FORM_AMC
+ s = "AdvancedMC";
+#elif CONFIG_SYS_FORM_XMC
+ s = "XMC";
+#elif CONFIG_SYS_FORM_PMC_XMC
+ s = "PMC/XMC";
+#elif CONFIG_SYS_FORM_PCI_EXPRESS
+ s = "PCI Express";
+#elif CONFIG_SYS_FORM_3U_VPX
+ s = "3U VPX";
+#else
+#error "Form factor not defined"
+#endif
+
+ name[strlen(name) - 1] += get_board_derivative();
+ printf("Board: X-ES %s %s SBC\n", name, s);
+
+ /* Display board specific information */
+ puts(" ");
+ if ((s = getenv("board_rev")))
+ printf("Rev %s, ", s);
+ if ((s = getenv("serial#")))
+ printf("Serial# %s, ", s);
+ if ((s = getenv("board_cfg")))
+ printf("Cfg %s", s);
+ puts("\n");
+
+ return 0;
+}
if (in_be32(&gur->gpporcr) & 0x10000)
return 66666666;
else
+#ifdef CONFIG_P2020
+ return 100000000;
+#else
return 50000000;
+#endif
}
#ifdef CONFIG_MPC85xx
if (ddr_ratio == 0x7)
return get_board_sys_clk(dummy);
+#ifdef CONFIG_P2020
+ if (in_be32(&gur->gpporcr) & 0x20000)
+ return 66666666;
+ else
+ return 100000000;
+#else
return 66666666;
+#endif
}
#endif
--- /dev/null
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+#ifdef CONFIG_PCA953X
+#include <pca953x.h>
+
+/*
+ * Determine if a board's flashes are write protected
+ */
+int board_flash_wp_on(void)
+{
+ if (pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
+ CONFIG_SYS_PCA953X_NVM_WP)
+ return 1;
+
+ return 0;
+}
+#endif
+
+/*
+ * Return a board's derivative model number. For example:
+ * return 2 for the XPedite5372 and return 1 for the XPedite5201.
+ */
+uint get_board_derivative(void)
+{
+#if defined(CONFIG_MPC85xx)
+ volatile ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+#elif defined(CONFIG_MPC86xx)
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+#endif
+
+ /*
+ * The top 4 lines of the local bus address are pulled low/high and
+ * can be read to determine the least significant digit of a board's
+ * model number.
+ */
+ return gur->gpporcr >> 28;
+}
+
+
--- /dev/null
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSL_8XXX_MISC_H___
+#define __FSL_8XXX_MISC_H___
+
+uint get_board_derivative(void);
+
+#endif /* __FSL_8XXX_MISC_H__ */
#include <pci.h>
#include <asm/fsl_pci.h>
#include <asm/io.h>
+#include <linux/compiler.h>
#include <libfdt.h>
#include <fdt_support.h>
-int first_free_busno = 0;
#ifdef CONFIG_PCI1
static struct pci_controller pci1_hose;
static struct pci_controller pcie3_hose;
#endif
-#ifdef CONFIG_MPC8572
-/* Correlate host/agent POR bits to usable info. Table 4-14 */
-struct host_agent_cfg_t {
- uchar pcie_root[3];
- uchar rio_host;
-} host_agent_cfg[8] = {
- {{0, 0, 0}, 0},
- {{0, 1, 1}, 1},
- {{1, 0, 1}, 0},
- {{1, 1, 0}, 1},
- {{0, 0, 1}, 0},
- {{0, 1, 0}, 1},
- {{1, 0, 0}, 0},
- {{1, 1, 1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-15 */
-struct io_port_cfg_t {
- uchar pcie_width[3];
- uchar rio_width;
-} io_port_cfg[16] = {
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{4, 0, 0}, 0},
- {{4, 4, 0}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 4},
- {{4, 2, 2}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{4, 0, 0}, 4},
- {{4, 0, 0}, 4},
- {{0, 0, 0}, 4},
- {{0, 0, 0}, 4},
- {{8, 0, 0}, 0},
-};
-#elif defined CONFIG_MPC8548
-/* Correlate host/agent POR bits to usable info. Table 4-12 */
-struct host_agent_cfg_t {
- uchar pci_host[2];
- uchar pcie_root[1];
- uchar rio_host;
-} host_agent_cfg[8] = {
- {{1, 1}, {0}, 0},
- {{1, 1}, {1}, 0},
- {{1, 1}, {0}, 1},
- {{0, 0}, {0}, 0}, /* reserved */
- {{0, 1}, {1}, 0},
- {{1, 1}, {1}, 0},
- {{0, 1}, {1}, 1},
- {{1, 1}, {1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-13 */
-struct io_port_cfg_t {
- uchar pcie_width[1];
- uchar rio_width;
-} io_port_cfg[8] = {
- {{0}, 0},
- {{0}, 0},
- {{0}, 0},
- {{4}, 4},
- {{4}, 4},
- {{0}, 4},
- {{0}, 4},
- {{8}, 0},
-};
-#elif defined CONFIG_MPC86xx
-/* Correlate host/agent POR bits to usable info. Table 4-17 */
-struct host_agent_cfg_t {
- uchar pcie_root[2];
- uchar rio_host;
-} host_agent_cfg[8] = {
- {{0, 0}, 0},
- {{1, 0}, 1},
- {{0, 1}, 0},
- {{1, 1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-16 */
-struct io_port_cfg_t {
- uchar pcie_width[2];
- uchar rio_width;
-} io_port_cfg[16] = {
- {{0, 0}, 0},
- {{0, 0}, 0},
- {{8, 0}, 0},
- {{8, 8}, 0},
- {{0, 0}, 0},
- {{8, 0}, 4},
- {{8, 0}, 4},
- {{8, 0}, 4},
- {{0, 0}, 0},
- {{0, 0}, 4},
- {{0, 0}, 4},
- {{0, 0}, 4},
- {{0, 0}, 0},
- {{0, 0}, 0},
- {{0, 8}, 0},
- {{8, 8}, 0},
-};
-#endif
-
/*
* 85xx and 86xx share naming conventions, but different layout.
* Correlate names to CPU-specific values to share common
void pci_init_board(void)
{
- struct pci_controller *hose;
- volatile ccsr_fsl_pci_t *pci;
- int width;
- int host;
+ struct fsl_pci_info pci_info[3];
+ int first_free_busno = 0;
+ int num = 0;
+ int pcie_ep;
+ __maybe_unused int pcie_configured;
+
#if defined(CONFIG_MPC85xx)
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#elif defined(CONFIG_MPC86xx)
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
#endif
- uint devdisr = in_be32(&gur->devdisr);
- uint io_sel = (in_be32(&gur->pordevsr) & MPC8xxx_PORDEVSR_IO_SEL) >>
+ u32 devdisr = in_be32(&gur->devdisr);
+ u32 pordevsr = in_be32(&gur->pordevsr);
+ __maybe_unused uint io_sel = (pordevsr & MPC8xxx_PORDEVSR_IO_SEL) >>
MPC8xxx_PORDEVSR_IO_SEL_SHIFT;
- uint host_agent = (in_be32(&gur->porbmsr) & MPC8xxx_PORBMSR_HA) >>
- MPC8xxx_PORBMSR_HA_SHIFT;
- struct pci_region *r;
#ifdef CONFIG_PCI1
uint pci_spd_norm = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_SPD;
uint pcix = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1;
uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000;
- width = 0; /* Silence compiler warning... */
- io_sel &= 0xf; /* Silence compiler warning... */
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- hose = &pci1_hose;
- host = host_agent_cfg[host_agent].pci_host[0];
- r = hose->regions;
-
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+ SET_STD_PCI_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
printf("\n PCI1: %d bit %s, %s %d MHz, %s, %s\n",
pci_32 ? 32 : 64,
pcix ? "PCIX" : "PCI",
pci_spd_norm ? ">=" : "<=",
pcix ? freq * 2 : freq,
- host ? "host" : "agent",
+ pcie_ep ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter");
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BASE,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BASE,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCI1 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
} else {
printf(" PCI1: disabled\n");
}
/* PCI1 not present on MPC8572 */
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
#endif
-#ifdef CONFIG_PCIE1
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- hose = &pcie1_hose;
- host = host_agent_cfg[host_agent].pcie_root[0];
- width = io_port_cfg[io_sel].pcie_width[0];
- r = hose->regions;
-
- if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
- printf("\n PCIE1 connected as %s (x%d)",
- host ? "Root Complex" : "Endpoint", width);
- if (in_be32(&pci->pme_msg_det)) {
- out_be32(&pci->pme_msg_det, 0xffffffff);
- debug(" with errors. Clearing. Now 0x%08x",
- in_be32(&pci->pme_msg_det));
- }
- printf("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BASE,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BASE,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCIE1 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+#ifdef CONFIG_PCIE1
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+ printf(" PCIE1 connected as %s\n",
+ pcie_ep ? "Endpoint" : "Root Complex");
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
+ } else {
+ printf(" PCIE1: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1);
#endif /* CONFIG_PCIE1 */
#ifdef CONFIG_PCIE2
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
- hose = &pcie2_hose;
- host = host_agent_cfg[host_agent].pcie_root[1];
- width = io_port_cfg[io_sel].pcie_width[1];
- r = hose->regions;
-
- if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
- printf("\n PCIE2 connected as %s (x%d)",
- host ? "Root Complex" : "Endpoint", width);
- if (in_be32(&pci->pme_msg_det)) {
- out_be32(&pci->pme_msg_det, 0xffffffff);
- debug(" with errors. Clearing. Now 0x%08x",
- in_be32(&pci->pme_msg_det));
- }
- printf("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_MEM_BASE,
- CONFIG_SYS_PCIE2_MEM_PHYS,
- CONFIG_SYS_PCIE2_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_IO_BASE,
- CONFIG_SYS_PCIE2_IO_PHYS,
- CONFIG_SYS_PCIE2_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCIE2 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
+ SET_STD_PCIE_INFO(pci_info[num], 2);
+ pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
+ printf(" PCIE2 connected as %s\n",
+ pcie_ep ? "Endpoint" : "Root Complex");
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie2_hose, first_free_busno);
+ } else {
+ printf(" PCIE2: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2);
#endif /* CONFIG_PCIE2 */
#ifdef CONFIG_PCIE3
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
- hose = &pcie3_hose;
- host = host_agent_cfg[host_agent].pcie_root[2];
- width = io_port_cfg[io_sel].pcie_width[2];
- r = hose->regions;
-
- if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
- printf("\n PCIE3 connected as %s (x%d)",
- host ? "Root Complex" : "Endpoint", width);
- if (in_be32(&pci->pme_msg_det)) {
- out_be32(&pci->pme_msg_det, 0xffffffff);
- debug(" with errors. Clearing. Now 0x%08x",
- in_be32(&pci->pme_msg_det));
- }
- printf("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_MEM_BASE,
- CONFIG_SYS_PCIE3_MEM_PHYS,
- CONFIG_SYS_PCIE3_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_IO_BASE,
- CONFIG_SYS_PCIE3_IO_PHYS,
- CONFIG_SYS_PCIE3_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCIE3 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
+ SET_STD_PCIE_INFO(pci_info[num], 3);
+ pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
+ printf(" PCIE3 connected as %s\n",
+ pcie_ep ? "Endpoint" : "Root Complex");
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie3_hose, first_free_busno);
+ } else {
+ printf(" PCIE3: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3);
#include <asm/io.h>
#include <fdt_support.h>
#include <pca953x.h>
+#include "../common/fsl_8xxx_misc.h"
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_PCI)
extern void ft_board_pci_setup(void *blob, bd_t *bd);
#endif
-int checkboard(void)
-{
- char *s;
-
- printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME);
- printf(" ");
- s = getenv("board_rev");
- if (s)
- printf("Rev %s, ", s);
- s = getenv("serial#");
- if (s)
- printf("Serial# %s, ", s);
- s = getenv("board_cfg");
- if (s)
- printf("Cfg %s", s);
- printf("\n");
-
- return 0;
-}
/*
* Print out which flash was booted from and if booting from the 2nd flash,
* swap flash chip selects to maintain consistent flash numbering/addresses.
extern void ft_board_pci_setup(void *blob, bd_t *bd);
-int checkboard(void)
-{
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
- volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
- char *s;
-
- printf("Board: X-ES %s PMC\n", CONFIG_SYS_BOARD_NAME);
- printf(" ");
- s = getenv("board_rev");
- if (s)
- printf("Rev %s, ", s);
- s = getenv("serial#");
- if (s)
- printf("Serial# %s, ", s);
- s = getenv("board_cfg");
- if (s)
- printf("Cfg %s", s);
- printf("\n");
-
- out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */
- out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */
- out_be32(&ecm->eedr, 0xffffffff); /* Clear ecm errors */
- out_be32(&ecm->eeer, 0xffffffff); /* Enable ecm errors */
-
- return 0;
-}
-
static void flash_cs_fixup(void)
{
int flash_sel;
extern void ft_board_pci_setup(void *blob, bd_t *bd);
-int checkboard(void)
-{
- char *s;
-
- printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME);
- printf(" ");
- s = getenv("board_rev");
- if (s)
- printf("Rev %s, ", s);
- s = getenv("serial#");
- if (s)
- printf("Serial# %s, ", s);
- s = getenv("board_cfg");
- if (s)
- printf("Cfg %s", s);
- printf("\n");
-
- return 0;
-}
-
static void flash_cs_fixup(void)
{
int flash_sel;
--- /dev/null
+#
+# Copyright 2007-2008 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += $(BOARD).o
+COBJS-y += ddr.o
+COBJS-y += law.o
+COBJS-y += tlb.o
+
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+ i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
+ sizeof(ddr3_spd_eeprom_t));
+}
+
+void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd,
+ unsigned int ctrl_num)
+{
+ unsigned int i;
+ unsigned int i2c_address = 0;
+
+ for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+ if (ctrl_num == 0 && i == 0)
+ i2c_address = SPD_EEPROM_ADDRESS1;
+ get_spd(&(ctrl_dimms_spd[i]), i2c_address);
+ }
+}
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+ return get_ddr_freq(0);
+}
+
+/*
+ * There are traditionally three board-specific SDRAM timing parameters
+ * which must be calculated based on the particular PCB artwork. These are:
+ * 1.) CPO (Read Capture Delay)
+ * - TIMING_CFG_2 register
+ * Source: Calculation based on board trace lengths and
+ * chip-specific internal delays.
+ * 2.) CLK_ADJUST (Clock and Addr/Cmd alignment control)
+ * - DDR_SDRAM_CLK_CNTL register
+ * Source: Signal Integrity Simulations
+ * 3.) 2T Timing on Addr/Ctl
+ * - TIMING_CFG_2 register
+ * Source: Signal Integrity Simulations
+ * Usually only needed with heavy load/very high speed (>DDR2-800)
+ *
+ * ====== XPedite550x DDR3-800 read delay calculations ======
+ *
+ * The P2020 processor provides an autoleveling option. Setting CPO to
+ * 0x1f enables this auto configuration.
+ */
+
+typedef struct {
+ unsigned short datarate_mhz_low;
+ unsigned short datarate_mhz_high;
+ unsigned char clk_adjust;
+ unsigned char cpo;
+} board_specific_parameters_t;
+
+const board_specific_parameters_t board_specific_parameters[][20] = {
+ {
+ /* Controller 0 */
+ {
+ /* DDR3-600/667 */
+ .datarate_mhz_low = 500,
+ .datarate_mhz_high = 750,
+ .clk_adjust = 5,
+ .cpo = 31,
+ },
+ {
+ /* DDR3-800 */
+ .datarate_mhz_low = 750,
+ .datarate_mhz_high = 850,
+ .clk_adjust = 5,
+ .cpo = 31,
+ },
+ },
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ const board_specific_parameters_t *pbsp =
+ &(board_specific_parameters[ctrl_num][0]);
+ u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
+ sizeof(board_specific_parameters[0][0]);
+ u32 i;
+ ulong ddr_freq;
+
+ /*
+ * Set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+ * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+ * there are two dimms in the controller, set odt_rd_cfg to 3 and
+ * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
+ */
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (i&1) { /* odd CS */
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+ popts->cs_local_opts[i].odt_wr_cfg = 0;
+ } else { /* even CS */
+ if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+ popts->cs_local_opts[i].odt_wr_cfg = 4;
+ } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
+ popts->cs_local_opts[i].odt_rd_cfg = 3;
+ popts->cs_local_opts[i].odt_wr_cfg = 3;
+ }
+ }
+ }
+
+ /*
+ * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(0) / 1000000;
+
+ for (i = 0; i < num_params; i++) {
+ if (ddr_freq >= pbsp->datarate_mhz_low &&
+ ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->cpo_override = pbsp->cpo;
+ popts->twoT_en = 0;
+ }
+ pbsp++;
+ }
+
+ /*
+ * Factors to consider for half-strength driver enable:
+ * - number of DIMMs installed
+ */
+ popts->half_strength_driver_enable = 0;
+
+ /*
+ * Enable on-die termination.
+ * From the Micron Technical Node TN-41-04, RTT_Nom should typically
+ * be 30 to 40 ohms, while RTT_WR should be 120 ohms. Setting RTT_WR
+ * is handled in the Freescale DDR3 driver. Set RTT_Nom here.
+ */
+ popts->rtt_override = 1;
+ popts->rtt_override_value = 3;
+}
+
--- /dev/null
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+ SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+#ifdef CONFIG_SYS_PCIE1_MEM_PHYS
+ SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+#endif
+#ifdef CONFIG_SYS_PCIE2_MEM_PHYS
+ SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
+ SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_2),
+#endif
+#ifdef CONFIG_SYS_PCIE3_MEM_PHYS
+ SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_3),
+ SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_3),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
--- /dev/null
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* W**G* - NOR flashes */
+ /* This will be changed to *I*G* after relocation to RAM. */
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_256M, 1),
+
+ /* *I*G* - CCSRBAR */
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_1M, 1),
+
+ /* *I*G* - NAND flash */
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_1M, 1),
+
+ /* **M** - Boot page for secondary processors */
+ SET_TLB_ENTRY(1, CONFIG_BPTR_VIRT_ADDR, CONFIG_BPTR_VIRT_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
+ 0, 3, BOOKE_PAGESZ_4K, 1),
+
+#ifdef CONFIG_PCIE1
+ /* *I*G* - PCIe */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_1G, 1),
+#endif
+
+#ifdef CONFIG_PCIE2
+ /* *I*G* - PCIe */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256M, 1),
+#endif
+
+#ifdef CONFIG_PCIE3
+ /* *I*G* - PCIe */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_256M, 1),
+#endif
+
+#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3)
+ /* *I*G* - PCIe */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_64M, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
--- /dev/null
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <pca953x.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void ft_board_pci_setup(void *blob, bd_t *bd);
+
+static void flash_cs_fixup(void)
+{
+ int flash_sel;
+
+ /*
+ * Print boot dev and swap flash flash chip selects if booted from 2nd
+ * flash. Swapping chip selects presents user with a common memory
+ * map regardless of which flash was booted from.
+ */
+ flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
+ CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS));
+ printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
+
+ if (flash_sel) {
+ set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
+ set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
+
+ set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
+ set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
+ }
+}
+
+int board_early_init_r(void)
+{
+ /* Initialize PCA9557 devices */
+ pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0);
+ pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0);
+ pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR2, 0xff, 0);
+ pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR3, 0xff, 0);
+
+ /*
+ * Remap NOR flash region to caching-inhibited
+ * so that flash can be erased/programmed properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+
+ /* Invalidate existing TLB entry for NOR flash */
+ disable_tlb(0);
+ set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
+ (CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_256M, 1);
+
+ flash_cs_fixup();
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_PCI
+ ft_board_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
+}
+#endif
+
+#ifdef CONFIG_MP
+extern void cpu_mp_lmb_reserve(struct lmb *lmb);
+
+void board_lmb_reserve(struct lmb *lmb)
+{
+ cpu_mp_lmb_reserve(lmb);
+}
+#endif
MPC8544DS powerpc mpc85xx mpc8544ds freescale
MPC8560ADS powerpc mpc85xx mpc8560ads freescale
MPC8568MDS powerpc mpc85xx mpc8568mds freescale
-XPEDITE5200 powerpc mpc85xx xpedite5200 xes
-XPEDITE5370 powerpc mpc85xx xpedite5370 xes
+xpedite520x powerpc mpc85xx - xes
+xpedite537x powerpc mpc85xx - xes
+xpedite550x powerpc mpc85xx - xes
sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540
sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540
sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33
P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020,SDCARD
sbc8641d powerpc mpc86xx
MPC8610HPCD powerpc mpc86xx mpc8610hpcd freescale
-XPEDITE5170 powerpc mpc86xx xpedite5170 xes
+xpedite517x powerpc mpc86xx - xes
MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale - MPC8641HPCN
cogent_mpc8xx powerpc mpc8xx cogent
ESTEEM192E powerpc mpc8xx esteem192e
DASA_SIM powerpc ppc4xx dasa_sim esd
PMC405DE powerpc ppc4xx pmc405de esd
METROBOX powerpc ppc4xx metrobox sandburst
-XPEDITE1000 powerpc ppc4xx xpedite1000 xes
+xpedite1000 powerpc ppc4xx - xes
korat_perm powerpc ppc4xx korat - - korat:KORAT_PERMANENT
haleakala powerpc ppc4xx kilauea amcc - kilauea:HALEAKALA
sycamore powerpc ppc4xx walnut amcc - walnut
if ((bdf = get_pci_dev(argv[2])) == -1)
return 1;
break;
+#ifdef CONFIG_CMD_PCI_ENUM
+ case 'e':
+ break;
+#endif
default: /* scan bus */
value = 1; /* short listing */
bdf = 0; /* bus number */
return 0;
case 'd': /* display */
return pci_cfg_display(bdf, addr, size, value);
+#ifdef CONFIG_CMD_PCI_ENUM
+ case 'e':
+ pci_init();
+ return 0;
+#endif
case 'n': /* next */
if (argc < 4)
goto usage;
"list and access PCI Configuration Space",
"[bus] [long]\n"
" - short or long list of PCI devices on bus 'bus'\n"
+#ifdef CONFIG_CMD_PCI_ENUM
+ "pci enum\n"
+ " - re-enumerate PCI buses\n"
+#endif
"pci header b.d.f\n"
" - show header of PCI device 'bus.device.function'\n"
"pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
2.2.2.1. I2C test
For verifying the I2C bus, a full I2C bus scanning will be performed
-using the i2c_probe() routine. If any I2C device is found, the test
-will be considered as passed, otherwise failed. This particular way
-will be used because it provides the most common method of testing.
-For example, using the internal loopback mode of the CPM I2C
-controller for testing would not work on boards where the software
-I2C driver (also known as bit-banged driver) is used.
+using the i2c_probe() routine. If a board defines
+CONFIG_SYS_POST_I2C_ADDRS the I2C test will pass if all devices
+listed in CONFIG_SYS_POST_I2C_ADDRS are found, and no additional
+devices are detected. If CONFIG_SYS_POST_I2C_ADDRS is not defined
+the test will pass if any I2C device is found.
+
+The CONFIG_SYS_POST_I2C_IGNORES define can be used to list I2C
+devices which may or may not be present when using
+CONFIG_SYS_POST_I2C_ADDRS. The I2C POST test will pass regardless
+if the devices in CONFIG_SYS_POST_I2C_IGNORES are found or not.
+This is useful in cases when I2C devices are optional (eg on a
+daughtercard that may or may not be present) or not critical
+to board operation.
2.2.2.2. Watchdog timer test
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) addr;
+ /* Reset hose to make sure its in a clean state */
+ memset(hose, 0, sizeof(struct pci_controller));
+
pci_setup_indirect(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
return fsl_is_pci_agent(hose);
*
*/
-static struct pci_controller* hose_head = NULL;
+static struct pci_controller* hose_head;
void pci_register_hose(struct pci_controller* hose)
{
}
#endif /* CONFIG_PCI_BOOTDELAY */
+ hose_head = NULL;
+
/* now call board specific pci_init()... */
pci_init_board();
}
/* List of I2C addresses to be verified by POST */
-#define I2C_ADDR_LIST {CONFIG_SYS_I2C_PICIO_ADDR, \
- CONFIG_SYS_I2C_RTC_ADDR, \
- }
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_PICIO_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR, \
+ }
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
/* List of I2C addresses to be verified by POST */
-#define I2C_ADDR_LIST {CONFIG_SYS_I2C_PICIO_ADDR, \
- CONFIG_SYS_I2C_RTC_ADDR, \
- }
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_PICIO_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR, \
+ }
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
/* List of I2C addresses to be verified by POST */
-#undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \
- CONFIG_SYS_I2C_RTC_ADDR, \
- CONFIG_SYS_I2C_SLAVE }
+#undef CONFIG_SYS_POST_I2C_ADDRS
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR, \
+ CONFIG_SYS_I2C_SLAVE}
/*
* Flash configuration
/* List of I2C addresses to be verified by POST */
#if defined (CONFIG_MINIFAP)
-#undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \
- CONFIG_SYS_I2C_HWMON_ADDR, \
- CONFIG_SYS_I2C_SLAVE }
+#undef CONFIG_SYS_POST_I2C_ADDRS
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_HWMON_ADDR, \
+ CONFIG_SYS_I2C_SLAVE}
#endif
/*
#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C)
#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
/* List of I2C addresses to be verified by POST */
-#define I2C_ADDR_LIST { CONFIG_SYS_I2C_SLAVE, CONFIG_SYS_I2C_IO, CONFIG_SYS_I2C_EEPROM }
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_SLAVE, \
+ CONFIG_SYS_I2C_IO, \
+ CONFIG_SYS_I2C_EEPROM}
/* display image timestamps */
#define CONFIG_TIMESTAMP 1
#endif
#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* List of I2C addresses to be verified by POST */
#ifdef CONFIG_USE_FRAM
-#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \
- CONFIG_SYS_I2C_SYSMON_ADDR, \
- CONFIG_SYS_I2C_RTC_ADDR, \
- CONFIG_SYS_I2C_POWER_A_ADDR, \
- CONFIG_SYS_I2C_POWER_B_ADDR, \
- CONFIG_SYS_I2C_KEYBD_ADDR, \
- CONFIG_SYS_I2C_PICIO_ADDR, \
- CONFIG_SYS_I2C_EEPROM_ADDR, \
- }
+#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \
+ CONFIG_SYS_I2C_SYSMON_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR, \
+ CONFIG_SYS_I2C_POWER_A_ADDR, \
+ CONFIG_SYS_I2C_POWER_B_ADDR, \
+ CONFIG_SYS_I2C_KEYBD_ADDR, \
+ CONFIG_SYS_I2C_PICIO_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_ADDR, \
+ }
#else /* Use EEPROM - which show up on 8 consequtive addresses */
-#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \
- CONFIG_SYS_I2C_SYSMON_ADDR, \
- CONFIG_SYS_I2C_RTC_ADDR, \
- CONFIG_SYS_I2C_POWER_A_ADDR, \
- CONFIG_SYS_I2C_POWER_B_ADDR, \
- CONFIG_SYS_I2C_KEYBD_ADDR, \
- CONFIG_SYS_I2C_PICIO_ADDR, \
- CONFIG_SYS_I2C_EEPROM_ADDR+0, \
- CONFIG_SYS_I2C_EEPROM_ADDR+1, \
- CONFIG_SYS_I2C_EEPROM_ADDR+2, \
- CONFIG_SYS_I2C_EEPROM_ADDR+3, \
- CONFIG_SYS_I2C_EEPROM_ADDR+4, \
- CONFIG_SYS_I2C_EEPROM_ADDR+5, \
- CONFIG_SYS_I2C_EEPROM_ADDR+6, \
- CONFIG_SYS_I2C_EEPROM_ADDR+7, \
- }
+#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \
+ CONFIG_SYS_I2C_SYSMON_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR, \
+ CONFIG_SYS_I2C_POWER_A_ADDR, \
+ CONFIG_SYS_I2C_POWER_B_ADDR, \
+ CONFIG_SYS_I2C_KEYBD_ADDR, \
+ CONFIG_SYS_I2C_PICIO_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+0, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+1, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+2, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+3, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+4, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+5, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+6, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+7, \
+ }
#endif /* CONFIG_USE_FRAM */
/*-----------------------------------------------------------------------
#define CONFIG_SYS_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */
#define CONFIG_SYS_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */
-#define I2C_ADDR_LIST { \
- CONFIG_SYS_I2C_RTC_ADDR, \
- CONFIG_SYS_I2C_EEPROM_CPU_ADDR, \
- CONFIG_SYS_I2C_EEPROM_MB_ADDR, \
- CONFIG_SYS_I2C_DSPIC_ADDR, \
- CONFIG_SYS_I2C_DSPIC_2_ADDR, \
- CONFIG_SYS_I2C_DSPIC_KEYB_ADDR, \
- CONFIG_SYS_I2C_DSPIC_IO_ADDR }
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_RTC_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_CPU_ADDR,\
+ CONFIG_SYS_I2C_EEPROM_MB_ADDR, \
+ CONFIG_SYS_I2C_DSPIC_ADDR, \
+ CONFIG_SYS_I2C_DSPIC_2_ADDR, \
+ CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,\
+ CONFIG_SYS_I2C_DSPIC_IO_ADDR }
/*
* Pass open firmware flat tree
/* List of I2C addresses to be verified by POST */
#if defined (CONFIG_MINIFAP)
-#undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \
- CONFIG_SYS_I2C_HWMON_ADDR, \
- CONFIG_SYS_I2C_SLAVE }
+#undef CONFIG_SYS_POST_I2C_ADDRS
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_HWMON_ADDR, \
+ CONFIG_SYS_I2C_SLAVE}
#endif
/*
/* High Level Configuration Options */
#define CONFIG_XPEDITE1000 1
#define CONFIG_SYS_BOARD_NAME "XPedite1000"
+#define CONFIG_SYS_FORM_PMC 1
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_440 1
#define CONFIG_440GX 1 /* 440 GX */
"misc_args=ip=on\0" \
"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
"bootfile=/home/user/file\0" \
- "osfile=/home/user/uImage-XPedite1000\0" \
- "fdtfile=/home/user/xpedite1000.dtb\0" \
+ "osfile=/home/user/board.uImage\0" \
+ "fdtfile=/home/user/board.dtb\0" \
"ubootfile=/home/user/u-boot.bin\0" \
"fdtaddr=c00000\0" \
"osaddr=0x1000000\0" \
*/
/*
- * xpedite5170 board configuration file
+ * xpedite517x board configuration file
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_MPC8641 1 /* MPC8641 specific */
#define CONFIG_XPEDITE5140 1 /* MPC8641HPCN board specific */
#define CONFIG_SYS_BOARD_NAME "XPedite5170"
+#define CONFIG_SYS_FORM_3U_VPX 1
#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
+#define CONFIG_POST (CONFIG_SYS_POST_MEMORY |\
+ CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST {CONFIG_SYS_I2C_DS1621_ADDR, \
+ CONFIG_SYS_I2C_DS4510_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_LM90_ADDR, \
+ CONFIG_SYS_I2C_PCA9553_ADDR, \
+ CONFIG_SYS_I2C_PCA953X_ADDR0, \
+ CONFIG_SYS_I2C_PCA953X_ADDR1, \
+ CONFIG_SYS_I2C_PCA953X_ADDR2, \
+ CONFIG_SYS_I2C_PCA953X_ADDR3, \
+ CONFIG_SYS_I2C_PEX8518_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR}
+/* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */
+#define I2C_ADDR_IGNORE_LIST {0x50}
/*
* Memory map
#define CONFIG_SYS_I2C_DS1621_ADDR 0x48
#define CONFIG_DTT_DS1621
#define CONFIG_DTT_SENSORS { 0 }
+#define CONFIG_SYS_I2C_LM90_ADDR 0x4c
/* I2C EEPROM - AT24C128B */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
#define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e
#define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f
#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0
+#define CONFIG_SYS_I2C_PCA9553_ADDR 0x62
/*
* PU = pulled high, PD = pulled low
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
/* PCIE1 - PEX8518 */
-#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */
-#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
/* PCIE2 - VPX P1 */
-#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SNTP
"misc_args=ip=on\0" \
"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
"bootfile=/home/user/file\0" \
- "osfile=/home/user/uImage-XPedite5170\0" \
- "fdtfile=/home/user/xpedite5170.dtb\0" \
+ "osfile=/home/user/board.uImage\0" \
+ "fdtfile=/home/user/board.dtb\0" \
"ubootfile=/home/user/u-boot.bin\0" \
"fdtaddr=c00000\0" \
"osaddr=0x1000000\0" \
*/
/*
- * xpedite5200 board configuration file
+ * xpedite520x board configuration file
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_MPC8548 1
#define CONFIG_XPEDITE5200 1
#define CONFIG_SYS_BOARD_NAME "XPedite5200"
+#define CONFIG_SYS_FORM_PMC_XMC 1
#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
+#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
+ CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST {CONFIG_SYS_I2C_MAX1237_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_PCA953X_ADDR0, \
+ CONFIG_SYS_I2C_PCA953X_ADDR1, \
+ CONFIG_SYS_I2C_RTC_ADDR}
/*
* Memory map
#define CONFIG_SYS_PCA953X_BRD_CFG2 0x04
#define CONFIG_SYS_PCA953X_XMC_ROOT0 0x08
#define CONFIG_SYS_PCA953X_FLASH_PASS_CS 0x10
-#define CONFIG_SYS_PCA953X_FLASH_WP 0x20
+#define CONFIG_SYS_PCA953X_NVM_WP 0x20
#define CONFIG_SYS_PCA953X_MONARCH 0x40
#define CONFIG_SYS_PCA953X_EREADY 0x80
#define CONFIG_SYS_PCA953X_P14_IO6 0x40
#define CONFIG_SYS_PCA953X_P14_IO7 0x80
+/* 12-bit ADC used to measure CPU diode */
+#define CONFIG_SYS_I2C_MAX1237_ADDR 0x34
+
/*
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS
#define CONFIG_SYS_PCI1_MEM_SIZE 0x40000000 /* 1G */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
#define CONFIG_SYS_PCI1_IO_PHYS 0xe8000000
#define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 1M */
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
#define CONFIG_CMD_PING
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_REGINFO
"misc_args=ip=on\0" \
"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
"bootfile=/home/user/file\0" \
- "osfile=/home/user/uImage-XPedite5200\0" \
- "fdtfile=/home/user/xpedite5200.dtb\0" \
+ "osfile=/home/user/board.uImage\0" \
+ "fdtfile=/home/user/board.dtb\0" \
"ubootfile=/home/user/u-boot.bin\0" \
"fdtaddr=c00000\0" \
"osaddr=0x1000000\0" \
*/
/*
- * xpedite5370 board configuration file
+ * xpedite537x board configuration file
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_MPC8572 1
#define CONFIG_XPEDITE5370 1
#define CONFIG_SYS_BOARD_NAME "XPedite5370"
+#define CONFIG_SYS_FORM_3U_VPX 1
#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
+#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
+ CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST {CONFIG_SYS_I2C_DS1621_ADDR, \
+ CONFIG_SYS_I2C_DS4510_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_LM90_ADDR, \
+ CONFIG_SYS_I2C_PCA953X_ADDR0, \
+ CONFIG_SYS_I2C_PCA953X_ADDR1, \
+ CONFIG_SYS_I2C_PCA953X_ADDR2, \
+ CONFIG_SYS_I2C_PCA953X_ADDR3, \
+ CONFIG_SYS_I2C_PEX8518_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR}
+/* The XPedite5370 can host an XMC which has an EEPROM at address 0x50 */
+#define I2C_ADDR_IGNORE_LIST {0x50}
/*
* Memory map
#define CONFIG_SYS_I2C_DS1621_ADDR 0x48
#define CONFIG_DTT_DS1621
#define CONFIG_DTT_SENSORS { 0 }
+#define CONFIG_SYS_I2C_LM90_ADDR 0x4c
/* I2C EEPROM - AT24C128B */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
/* PCIE1 - VPX P1 */
-#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */
-#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
/* PCIE2 - PEX8518 */
-#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
#define CONFIG_CMD_PING
#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_SNTP
"misc_args=ip=on\0" \
"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
"bootfile=/home/user/file\0" \
- "osfile=/home/user/uImage-XPedite5370\0" \
- "fdtfile=/home/user/xpedite5370.dtb\0" \
+ "osfile=/home/user/board.uImage\0" \
+ "fdtfile=/home/user/board.dtb\0" \
"ubootfile=/home/user/u-boot.bin\0" \
"fdtaddr=c00000\0" \
"osaddr=0x1000000\0" \
--- /dev/null
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * xpedite550x board configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_BOOKE 1 /* BOOKE */
+#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
+#define CONFIG_P2020 1
+#define CONFIG_XPEDITE550X 1
+#define CONFIG_SYS_BOARD_NAME "XPedite5500"
+#define CONFIG_SYS_FORM_PMC_XMC 1
+#define CONFIG_PRPMC_PCI_ALIAS "pci0" /* Processor PMC interface on pci0 */
+#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0xfff80000
+#endif
+
+#define CONFIG_PCI 1 /* Enable PCI/PCIE */
+#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
+#define CONFIG_PCIE1 1 /* PCIE controler 1 (PEX8112 or XMC) */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
+#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+#define CONFIG_FSL_ELBC 1
+
+/*
+ * Multicore config
+ */
+#define CONFIG_MP
+#define CONFIG_BPTR_VIRT_ADDR 0xee000000 /* virt boot page address */
+#define CONFIG_MPC8xxx_DISABLE_BPTR /* Don't leave BPTR enabled */
+
+/*
+ * DDR config
+ */
+#define CONFIG_FSL_DDR3
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#define CONFIG_DDR_SPD
+#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#define SPD_EEPROM_ADDRESS1 0x54
+#define SPD_EEPROM_OFFSET 0x200 /* OFFSET of SPD in EEPROM */
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_CHIP_SELECTS_PER_CTRL 2
+#define CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_board_sys_clk(unsigned long dummy);
+extern unsigned long get_board_ddr_clk(unsigned long dummy);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */
+#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /* ddrclk for MPC85xx */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_ENABLE_36BIT_PHYS 1
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+
+/*
+ * Diagnostics
+ */
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END 0x20000000
+#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
+ CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST {CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_LM75_ADDR, \
+ CONFIG_SYS_I2C_LM90_ADDR, \
+ CONFIG_SYS_I2C_PCA953X_ADDR0, \
+ CONFIG_SYS_I2C_PCA953X_ADDR2, \
+ CONFIG_SYS_I2C_PCA953X_ADDR3, \
+ CONFIG_SYS_I2C_RTC_ADDR}
+
+/*
+ * Memory map
+ * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable
+ * 0x8000_0000 0xbfff_ffff PCIe1 Mem 1G non-cacheable
+ * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable
+ * 0xe800_0000 0xe87f_ffff PCIe1 IO 8M non-cacheable
+ * 0xee00_0000 0xee00_ffff Boot page translation 4K non-cacheable
+ * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable
+ * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable
+ * 0xf000_0000 0xf7ff_ffff NOR Flash 2 128M non-cacheable
+ * 0xf800_0000 0xffff_ffff NOR Flash 1 128M non-cacheable
+ */
+
+#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_3)
+
+/*
+ * NAND flash configuration
+ */
+#define CONFIG_SYS_NAND_BASE 0xef800000
+#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */
+#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \
+ CONFIG_SYS_NAND_BASE2}
+#define CONFIG_SYS_MAX_NAND_DEVICE 2
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */
+#define CONFIG_NAND_FSL_ELBC
+
+/*
+ * NOR flash configuration
+ */
+#define CONFIG_SYS_FLASH_BASE 0xf8000000
+#define CONFIG_SYS_FLASH_BASE2 0xf0000000
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \
+ {0xf7f40000, 0xc0000} }
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+
+/*
+ * Chip select configuration
+ */
+/* NOR Flash 0 on CS0 */
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
+ BR_PS_16 | \
+ BR_V)
+#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB | \
+ OR_GPCM_CSNT | \
+ OR_GPCM_XACS | \
+ OR_GPCM_ACS_DIV2 | \
+ OR_GPCM_SCY_8 | \
+ OR_GPCM_TRLX | \
+ OR_GPCM_EHTR | \
+ OR_GPCM_EAD)
+
+/* NOR Flash 1 on CS1 */
+#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 | \
+ BR_PS_16 | \
+ BR_V)
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
+
+/* NAND flash on CS2 */
+#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE | \
+ (2<<BR_DECC_SHIFT) | \
+ BR_PS_8 | \
+ BR_MS_FCM | \
+ BR_V)
+
+/* NAND flash on CS2 */
+#define CONFIG_SYS_OR2_PRELIM (OR_AM_256KB | \
+ OR_FCM_PGS | \
+ OR_FCM_CSCT | \
+ OR_FCM_CST | \
+ OR_FCM_CHT | \
+ OR_FCM_SCY_1 | \
+ OR_FCM_TRLX | \
+ OR_FCM_EHTR)
+
+/* NAND flash on CS3 */
+#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE2 | \
+ (2<<BR_DECC_SHIFT) | \
+ BR_PS_8 | \
+ BR_MS_FCM | \
+ BR_V)
+#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
+
+/*
+ * Use L1 as initial stack
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK 1
+#define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000
+#define CONFIG_SYS_INIT_RAM_END 0x00004000
+
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * Use the HUSH parser
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+#define CONFIG_FDT_FIXUP_PCI_IRQ 1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_SYS_I2C2_OFFSET 0x3100
+#define CONFIG_I2C_MULTI_BUS
+
+/* I2C DS7505 temperature sensor */
+#define CONFIG_DTT_LM75
+#define CONFIG_DTT_SENSORS { 0 }
+#define CONFIG_SYS_I2C_LM75_ADDR 0x48
+
+/* I2C ADT7461 temperature sensor */
+#define CONFIG_SYS_I2C_LM90_ADDR 0x4C
+
+/* I2C EEPROM - AT24C128B */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T11 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
+
+/* GPIO */
+#define CONFIG_PCA953X
+#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18
+#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x1c
+#define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e
+#define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f
+#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0
+
+/*
+ * GPIO pin definitions, PU = pulled high, PD = pulled low
+ */
+/* PCA9557 @ 0x18*/
+#define CONFIG_SYS_PCA953X_C0_SER0_EN 0x01 /* PU; UART0 enable (1: enabled) */
+#define CONFIG_SYS_PCA953X_C0_SER0_MODE 0x02 /* PU; UART0 serial mode select (1: RS-485, 0: RS-232) */
+#define CONFIG_SYS_PCA953X_C0_SER1_EN 0x04 /* PU; UART1 enable (1: enabled) */
+#define CONFIG_SYS_PCA953X_C0_SER1_MODE 0x08 /* PU; UART1 serial mode select (1: RS-485, 0: RS-232) */
+#define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS 0x10 /* PU; Boot flash CS select */
+#define CONFIG_SYS_PCA953X_NVM_WP 0x20 /* PU; Write protection (0: disabled, 1: enabled) */
+
+/* PCA9557 @ 0x1e*/
+#define CONFIG_SYS_PCA953X_XMC_GA0 0x01 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_GA1 0x02 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_GA2 0x04 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_WAKE 0x10 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_BIST 0x20 /* Enable XMC BIST */
+#define CONFIG_SYS_PCA953X_PMC_EREADY 0x40 /* PU; PMC PCI eready */
+#define CONFIG_SYS_PCA953X_PMC_MONARCH 0x80 /* PMC monarch mode enable */
+
+/* PCA9557 @ 0x1f */
+#define CONFIG_SYS_PCA953X_MC_GPIO0 0x01 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO1 0x02 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO2 0x04 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO3 0x08 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO4 0x10 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO5 0x20 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO6 0x40 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO7 0x80 /* PU; */
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 1 - PEX8112 or XMC, depending on build option */
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
+
+
+/*
+ * Networking options
+ */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_TSEC_TBI
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
+#define CONFIG_ETHPRIME "eTSEC2"
+
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC1"
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC1_PHY_ADDR 1
+#define TSEC1_PHYIDX 0
+#define CONFIG_HAS_ETH0
+
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC2"
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_PHY_ADDR 2
+#define TSEC2_PHYIDX 0
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC3"
+#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC3_PHY_ADDR 3
+#define TSEC3_PHYIDX 0
+#define CONFIG_HAS_ETH2
+
+/*
+ * USB
+ */
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Command configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+#define CONFIG_PREBOOT /* enable preboot variable */
+#define CONFIG_FIT 1
+#define CONFIG_FIT_VERBOSE 1
+#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
+
+/*
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */
+#define CONFIG_ENV_SIZE 0x8000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
+
+/*
+ * Flash memory map:
+ * fff80000 - ffffffff Pri U-Boot (512 KB)
+ * fff40000 - fff7ffff Pri U-Boot Environment (256 KB)
+ * fff00000 - fff3ffff Pri FDT (256KB)
+ * fef00000 - ffefffff Pri OS image (16MB)
+ * f8000000 - feefffff Pri OS Use/Filesystem (111MB)
+ *
+ * f7f80000 - f7ffffff Sec U-Boot (512 KB)
+ * f7f40000 - f7f7ffff Sec U-Boot Environment (256 KB)
+ * f7f00000 - f7f3ffff Sec FDT (256KB)
+ * f6f00000 - f7efffff Sec OS image (16MB)
+ * f0000000 - f6efffff Sec OS Use/Filesystem (111MB)
+ */
+#define CONFIG_UBOOT1_ENV_ADDR MK_STR(0xfff80000)
+#define CONFIG_UBOOT2_ENV_ADDR MK_STR(0xf7f80000)
+#define CONFIG_FDT1_ENV_ADDR MK_STR(0xfff00000)
+#define CONFIG_FDT2_ENV_ADDR MK_STR(0xf7f00000)
+#define CONFIG_OS1_ENV_ADDR MK_STR(0xfef00000)
+#define CONFIG_OS2_ENV_ADDR MK_STR(0xf6f00000)
+
+#define CONFIG_PROG_UBOOT1 \
+ "$download_cmd $loadaddr $ubootfile; " \
+ "if test $? -eq 0; then " \
+ "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \
+ "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \
+ "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \
+ "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \
+ "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \
+ "if test $? -ne 0; then " \
+ "echo PROGRAM FAILED; " \
+ "else; " \
+ "echo PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_UBOOT2 \
+ "$download_cmd $loadaddr $ubootfile; " \
+ "if test $? -eq 0; then " \
+ "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \
+ "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \
+ "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \
+ "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \
+ "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \
+ "if test $? -ne 0; then " \
+ "echo PROGRAM FAILED; " \
+ "else; " \
+ "echo PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_BOOT_OS_NET \
+ "$download_cmd $osaddr $osfile; " \
+ "if test $? -eq 0; then " \
+ "if test -n $fdtaddr; then " \
+ "$download_cmd $fdtaddr $fdtfile; " \
+ "if test $? -eq 0; then " \
+ "bootm $osaddr - $fdtaddr; " \
+ "else; " \
+ "echo FDT DOWNLOAD FAILED; " \
+ "fi; " \
+ "else; " \
+ "bootm $osaddr; " \
+ "fi; " \
+ "else; " \
+ "echo OS DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_OS1 \
+ "$download_cmd $osaddr $osfile; " \
+ "if test $? -eq 0; then " \
+ "erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \
+ "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \
+ "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \
+ "if test $? -ne 0; then " \
+ "echo OS PROGRAM FAILED; " \
+ "else; " \
+ "echo OS PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo OS DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_OS2 \
+ "$download_cmd $osaddr $osfile; " \
+ "if test $? -eq 0; then " \
+ "erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \
+ "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \
+ "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \
+ "if test $? -ne 0; then " \
+ "echo OS PROGRAM FAILED; " \
+ "else; " \
+ "echo OS PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo OS DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_FDT1 \
+ "$download_cmd $fdtaddr $fdtfile; " \
+ "if test $? -eq 0; then " \
+ "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \
+ "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \
+ "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \
+ "if test $? -ne 0; then " \
+ "echo FDT PROGRAM FAILED; " \
+ "else; " \
+ "echo FDT PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo FDT DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_FDT2 \
+ "$download_cmd $fdtaddr $fdtfile; " \
+ "if test $? -eq 0; then " \
+ "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \
+ "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \
+ "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \
+ "if test $? -ne 0; then " \
+ "echo FDT PROGRAM FAILED; " \
+ "else; " \
+ "echo FDT PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo FDT DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "autoload=yes\0" \
+ "download_cmd=tftp\0" \
+ "console_args=console=ttyS0,115200\0" \
+ "root_args=root=/dev/nfs rw\0" \
+ "misc_args=ip=on\0" \
+ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
+ "bootfile=/home/user/file\0" \
+ "osfile=/home/user/board.uImage\0" \
+ "fdtfile=/home/user/board.dtb\0" \
+ "ubootfile=/home/user/u-boot.bin\0" \
+ "fdtaddr=c00000\0" \
+ "osaddr=0x1000000\0" \
+ "loadaddr=0x1000000\0" \
+ "prog_uboot1="CONFIG_PROG_UBOOT1"\0" \
+ "prog_uboot2="CONFIG_PROG_UBOOT2"\0" \
+ "prog_os1="CONFIG_PROG_OS1"\0" \
+ "prog_os2="CONFIG_PROG_OS2"\0" \
+ "prog_fdt1="CONFIG_PROG_FDT1"\0" \
+ "prog_fdt2="CONFIG_PROG_FDT2"\0" \
+ "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \
+ "bootcmd_flash1=run set_bootargs; " \
+ "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
+ "bootcmd_flash2=run set_bootargs; " \
+ "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
+ "bootcmd=run bootcmd_flash1\0"
+#endif /* __CONFIG_H */
#include <asm/immap_85xx.h>
#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr))
+#elif defined (CONFIG_MPC86xx)
+#include <asm/immap_86xx.h>
+#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr))
+
#elif defined (CONFIG_4xx)
#define _POST_WORD_ADDR \
(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
* MA 02111-1307 USA
*/
-#include <common.h>
-
/*
* I2C test
*
* For verifying the I2C bus, a full I2C bus scanning is performed.
*
- * #ifdef I2C_ADDR_LIST
- * The test is considered as passed if all the devices and
- * only the devices in the list are found.
- * #else [ ! I2C_ADDR_LIST ]
+ * #ifdef CONFIG_SYS_POST_I2C_ADDRS
+ * The test is considered as passed if all the devices and only the devices
+ * in the list are found.
+ * #ifdef CONFIG_SYS_POST_I2C_IGNORES
+ * Ignore devices listed in CONFIG_SYS_POST_I2C_IGNORES. These devices
+ * are optional or not vital to board functionality.
+ * #endif
+ * #else [ ! CONFIG_SYS_POST_I2C_ADDRS ]
* The test is considered as passed if any I2C device is found.
* #endif
*/
+#include <common.h>
#include <post.h>
#include <i2c.h>
#if CONFIG_POST & CONFIG_SYS_POST_I2C
+static int i2c_ignore_device(unsigned int chip)
+{
+#ifdef CONFIG_SYS_POST_I2C_IGNORES
+ const unsigned char i2c_ignore_list[] = CONFIG_SYS_POST_I2C_IGNORES;
+ int i;
+
+ for (i = 0; i < sizeof(i2c_ignore_list); i++)
+ if (i2c_ignore_list[i] == chip)
+ return 1;
+#endif
+
+ return 0;
+}
+
int i2c_post_test (int flags)
{
unsigned int i;
- unsigned int good = 0;
-#ifdef I2C_ADDR_LIST
- unsigned int bad = 0;
+#ifndef CONFIG_SYS_POST_I2C_ADDRS
+ /* Start at address 1, address 0 is the general call address */
+ for (i = 1; i < 128; i++)
+ if (i2c_ignore_device(i))
+ continue;
+ if (i2c_probe (i) == 0)
+ return 0;
+
+ /* No devices found */
+ return -1;
+#else
+ unsigned int ret = 0;
int j;
- unsigned char i2c_addr_list[] = I2C_ADDR_LIST;
- unsigned char i2c_miss_list[] = I2C_ADDR_LIST;
-#endif
+ const unsigned char i2c_addr_list[] = CONFIG_SYS_POST_I2C_ADDRS;
- for (i = 0; i < 128; i++) {
- if (i2c_probe (i) == 0) {
-#ifndef I2C_ADDR_LIST
- good++;
-#else /* I2C_ADDR_LIST */
- for (j=0; j<sizeof(i2c_addr_list); ++j) {
- if (i == i2c_addr_list[j]) {
- good++;
- i2c_miss_list[j] = 0xFF;
- break;
- }
- }
- if (j == sizeof(i2c_addr_list)) {
- bad++;
- post_log ("I2C: addr %02X not expected\n",
- i);
+ /* Start at address 1, address 0 is the general call address */
+ for (i = 1; i < 128; i++) {
+ if (i2c_ignore_device(i))
+ continue;
+ if (i2c_probe(i) != 0)
+ continue;
+
+ for (j = 0; j < sizeof(i2c_addr_list); ++j) {
+ if (i == i2c_addr_list[j]) {
+ i2c_addr_list[j] = 0xff;
+ break;
}
-#endif /* I2C_ADDR_LIST */
}
- }
-#ifndef I2C_ADDR_LIST
- return good > 0 ? 0 : -1;
-#else /* I2C_ADDR_LIST */
- if (good != sizeof(i2c_addr_list)) {
- for (j=0; j<sizeof(i2c_miss_list); ++j) {
- if (i2c_miss_list[j] != 0xFF) {
- post_log ("I2C: addr %02X did not respond\n",
- i2c_miss_list[j]);
- }
+ if (j == sizeof(i2c_addr_list)) {
+ ret = -1;
+ post_log("I2C: addr %02x not expected\n", i);
}
}
- return ((good == sizeof(i2c_addr_list)) && (bad == 0)) ? 0 : -1;
+
+ for (i = 0; i < sizeof(i2c_addr_list); ++i) {
+ if (i2c_addr_list[i] == 0xff)
+ continue;
+ post_log("I2C: addr %02x did not respond\n", i2c_addr_list[i]);
+ ret = -1;
+ }
+
+ return ret;
#endif
}
projects / people / ms / u-boot.git / commitdiff
