[thirdparty/binutils-gdb.git] / sim / cr16 / ChangeLog

2015-12-24  Mike Frysinger  <vapier@gentoo.org>

	* sim-if.c (cris_option_install): Delete.
	(sim_open): Call sim_add_option_table.
	* tconfig.h: Delete sim-module.h include.
	(MODULE_INSTALL_FN, MODULE_LIST): Delete.

2015-11-15  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and
	sim-stop.o.

2015-11-15  Mike Frysinger  <vapier@gentoo.org>

	* cr16_sim.h (cr16_callback): Delete.
	* interp.c (cr16_callback): Delete.
	(do_run): Delete cr16_callback.  Replace
	cr16_callback->printf_filtered with sim_io_printf.
	(sim_open): Delete cr16_callback assignment.
	(step_once, sim_create_inferior): Replace
	cr16_callback->printf_filtered with sim_io_printf.
	* simops.c (move_to_cr, trace_input_func, do_trace_output_flush,
	do_trace_output_finish, trace_output_40, trace_output_32,
	trace_output_16, trace_output_void, trace_output_flag): Replace
	cr16_callback->printf_filtered with sim_io_printf and
	cr16_callback->flush_stdout with sim_io_flush_stdout.
	(OP_14C_14): Likewise.  Rename cr16_callback to cb.

2015-11-15  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.in (SIM_OBJS): Add sim-reason.o, sim-resume.o, and
	sim-stop.o.
	* cr16_sim.h (struct _state): Delete exe and exception.
	* interp.c (lookup_hash): Call sim_engine_halt instead of setting
	State.exception.
	(do_run): Delete unused s and func variables.
	(stop_simulator, sim_stop, sim_stop_reason): Delete.
	(sim_resume): Rename to ...
	(step_once): ... this.  Delete State.exception code and move
	siggnal checking to sim_engine_run.
	(sim_engine_run): New function.
	* simops.c (EXCEPTION): Define.
	(move_to_cr): Call EXCEPTION instead of setting State.exception.
	(OP_1_4, OP_18_8, OP_10_10, OP_C0_8, OP_102_14, OP_148_14, OP_D_C,
	OP_14_D, OP_15_D, OP_2C00_10, OP_16_D, OP_17_D, OP_31E_10, OP_6_10):
	Likewise.
	(OP_C_C): Likewise.  Call sim_engine_halt instead of setting
	State.exception.
	(OP_0_20): Call sim_engine_halt instead of setting State.exception.

2015-11-15  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.in (SIM_OBJS): Delete endian.o.
	(INCLUDE): Delete endian.c.
	* configure.ac (SIM_AC_OPTION_ENDIAN): Declare little endian.
	(SIM_AC_OPTION_ALIGNMENT): release unaligned loads.
	* configure: Regenerate.
	* cr16_sim.h (IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE,
	IMEM_SEGMENTS, DMEM_SEGMENTS, UMEM_SEGMENTS, cr16_memory, dmem_addr,
	imem_addr, decode_pc, get_longword, get_word, write_word,
	write_longword, READ_16): Delete.
	(struct _state): Delete mem member.
	(endian.c): Delete include.
	(SB, RB, SW, RW, SLW): Rewrite to use sim-core functions.
	(get_longword): New function.
	(RLW): Rewrite to use get_longword.
	* endian.c: Delete file.
	* interp.c (map_memory, sim_size, last_segname, last_from, last_to,
	IMAP0_OFFSET, DMAP0_OFFSET, DMAP2_SHADDOW, DMAP2_OFFSET,
	dmap_register, imap_register, sim_cr16_translate_dmap_addr,
	sim_cr16_translate_imap_addr, sim_cr16_translate_addr, map_memory,
	xfer_mem, sim_write, sim_read, dmem_addr, imem_addr): Delete.
	(do_run): Delete iaddr and replace imem_addr/get_longword with RW.
	(sim_open): Call sim_do_commandf.  Delete sim_size call.
	(sim_resume): Delete iaddr and replace imem_addr/get_longword with
	RLW.
	* simops.c (MEMPTR): Rewrite to use sim_core_trans_addr.

2015-11-15  Mike Frysinger  <vapier@gentoo.org>

	* cr16_sim.h (struct simops): Add SIM_DESC and SIM_CPU to func args.
	(SET_CREG, SET_HW_CREG, SET_PSR_BIT): Pass sd and cpu to move_to_cr.
	(dmem_addr, imem_addr, move_to_cr): Add SIM_DESC and SIM_CPU args.
	(RB, SW, RW, SLW, RLW): Pass sd and cpu to dmem_addr.
	* endian.c: Change cr16_sim.h include to sim-main.h.
	* gencode.c: Likewise.  Add SIM_DESC and SIM_CPU args to all OPs.
	* interp.c (lookup_hash, map_memory, do_run, dmap_register,
	imap_register, sim_cr16_translate_dmap_addr, xfer_mem,
	sim_cr16_translate_imap_addr, sim_cr16_translate_addr): Add
	SIM_DESC and SIM_CPU args and adjust all callers.
	(trace_sd): Delete.
	(sim_open): Do not assign trace_sd.
	(sim_resume, sim_create_inferior): Set up cpu from the first one
	in sd.
	(cr16_reg_store): Get sim state from cpu.
	* simops.c (move_to_cr): Add SIM_DESC and SIM_CPU args.
	(trace_input_func, trace_input, do_trace_output_finish,
	do_trace_output_finish, trace_output_40, trace_output_32,
	trace_output_16, trace_output_void, trace_output_flag): Add
	SIM_DESC arg.
	(trace_input_func): Likewise.  Change trace_sd to sd.
	(OP_*): Add SIM_DESC and SIM_CPU args to all OP funcs.

2015-11-15  Mike Frysinger  <vapier@gentoo.org>

	* cr16_sim.h (get_longlong, write_longlong, WRITE_16, READ_64,
	WRITE_64): Delete.
	* endian.c (get_longlong, write_longlong): Likewise.

2015-11-15  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.in (SIM_OBJS): Add sim-reg.o.
	* interp.c (cr16_reg_fetch, cr16_reg_store): Add prototypes.
	(sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
	(cr16_extract_unsigned_integer, cr16_store_unsigned_integer):
	New helper functions.
	(sim_fetch_register): Rename to ...
	(cr16_reg_fetch): ... this.  Use cr16_store_unsigned_integer
	to write out the updated register values.
	(sim_store_register): Rename to ...
	(cr16_reg_store): ... this.  Use cr16_extract_unsigned_integer
	to read in the updated register values.

2015-11-15  Mike Frysinger  <vapier@gentoo.org>

	* interp.c (sim_open): Delete sim_create_inferior call.

2015-11-14  Mike Frysinger  <vapier@gentoo.org>

	* interp.c (sim_close): Delete.

2015-11-10  Mike Frysinger  <vapier@gentoo.org>

	* interp.c (sim_cr16_translate_dmap_addr): Mark static.
	(sim_cr16_translate_imap_addr): Likewise.
	(sim_cr16_translate_addr): Likewise.

2015-06-23  Mike Frysinger  <vapier@gentoo.org>

	* configure: Regenerate.

2015-06-12  Mike Frysinger  <vapier@gentoo.org>

	* configure: Regenerate.

2015-06-12  Mike Frysinger  <vapier@gentoo.org>

	* configure: Regenerate.

2015-04-18  Mike Frysinger  <vapier@gentoo.org>

	* sim-main.h (SIM_CPU): Delete.

2015-04-18  Mike Frysinger  <vapier@gentoo.org>

	* sim-main.h (sim_cia): Delete.

2015-04-17  Mike Frysinger  <vapier@gentoo.org>

	* sim-main.h (CIA_GET, CIA_SET): Delete.

2015-04-17  Mike Frysinger  <vapier@gentoo.org>

	* interp.c (cr16_pc_get, cr16_pc_set): New functions.
	(sim_open): Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.

2015-04-15  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.in (SIM_OBJS): Delete sim-cpu.o.
	* sim-main.h (STATE_CPU): Delete.

2015-04-13  Mike Frysinger  <vapier@gentoo.org>

	* configure: Regenerate.

2015-04-06  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.in (SIM_OBJS): Delete sim-engine.o.

2015-04-01  Mike Frysinger  <vapier@gentoo.org>

	* interp.c (sim_set_profile, sim_set_profile_size): Delete.

2015-03-31  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.in (simops.o): New rule.

2015-03-29  Mike Frysinger  <vapier@gentoo.org>

	* cr16_sim.h (text, text_start, text_end, prog_bfd): Delete.
	(SEXT8, SEXT16, SEXT32): Undefine.
	* interp.c: Delete run-sim.h and cr16_sim.h includes.  Include
	sim-main.h and sim-options.h.
	(myname, sim_kind, init_text_p, prog_bfd_was_opened_p, prog_bfd,
	text, text_start, text_end, decode_pc, sim_set_profile,
	sim_set_profile_size, sim_set_trace, sim_info, sim_set_callbacks,
	sim_trace, sim_complete_command, sim_do_command, sim_load): Delete.
	(do_run): Delete prototype.
	(INLINE): Delete define.
	(do_run, xfer_mem): Pass in SIM_DESC.  Set cr16_callback locally from
	it.
	(sim_size): Mark static.
	(sim_write, sim_read): Pass sd to xfer_mem.
	(free_state): New function.
	(trace_sd): Declare global variable.
	(sim_open): Rewrite to use new common logic.
	(sim_close): Delete body.
	(sim_resume): Pass sd to do_run.
	* Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS): Delete.
	(SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
	* sim-main.h: New file.
	* simops.c: Change cr16_sim.h include to sim-main.h.
	(trace_input_func): Rewrite pc checks to use trace_sd.

2015-03-29  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK.
	* interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL,
	ui_loop_hook_counter, deprecated_ui_loop_hook): Delete.
	(sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code.

2015-03-29  Mike Frysinger  <vapier@gentoo.org>

	* interp.c (old_segment_mapping, ins_type_counters, add_commas,
	set_dmap_register, set_imap_register, HELD_SPI_IDX, HELD_SPU_IDX,
	spu_register, spi_register, set_spi_register, set_spu_register):
	Delete.
	(sim_cr16_translate_addr): Delete old_segment_mapping handling.
	(sim_open): Likewise.
	(sim_info): Delete function body.

2015-03-29  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.in (gencode.o, cr16-opc.o): Add $(WARN_CFLAGS).
	(gencode): Add $(BUILD_LDFLAGS).
	* endian.c (get_word, get_longword, get_longlong, write_word,
	write_longword, write_longlong): Convert old style prototypes.
	* gencode.c: Include string.h.
	(write_header): Convert old style prototype and fix printf format.
	(write_template, write_opcodes): Likewise.
	(check_opcodes): Mark static void and put behind #if 0.
	* interp.c: Include inttypes.h and run-sim.h.
	(add_commas): Delete prototype.
	(decode_pc): Convert old style prototype.
	(do_run): Change h->op compare to 0.
	(add_commas, set_dmap_register, set_imap_register, HELD_SPI_IDX,
	HELD_SPU_IDX, spu_register, spi_register, set_spi_register,
	set_spu_register): Wrap in #if 0.
	(sim_write, sim_read, sim_close, sim_stop, sim_set_callbacks,
	sim_stop_reason, sim_fetch_register, sim_store_register,
	sim_do_command): Convert old style prototypes.
	(sim_create_inferior): Fix pointer cast to use uintptr_t.
	* simops.c [HAVE_TIME_H]: Include time.h.
	[HAVE_SYS_TIME_H]: Include sys/time.h.
	[TARGET_SYS_utime]: Include utime.h.
	[TARGET_SYS_wait]: Include sys/wait.h.
	(strrchr): Delete prototype.
	(cond_stat): Mark static.
	(trace_input_func): Mark name static.
	(trace_input_func, trace_output_void, trace_output_flag): Convert old style prototypes.
	(trace_output_40): Wrap in #if 0.
	(OP_*): Convert old style prototypes.  Move trace_input call below
	all variable decls.  Initialize tmp to 0 when appropriate.

2015-03-29  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.in (SIM_EXTRA_CFLAGS): Delete -DSIM_HAVE_ENVIRONMENT.
	(interp.o, simops.o, endian.o, table.o): Delete rules.
	* configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
	SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, and
	SIM_AC_OPTION_INLINE.
	* config.in, configure: Regenerate.
	* interp.c (sim_trace): Define.

2015-03-16  Mike Frysinger  <vapier@gentoo.org>

	* config.in, configure: Regenerate.

2015-03-14  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.in (SIM_EXTRA_CFLAGS): Add
	-DSIM_USE_DEPRECATED_RUN_FRONTEND.
	(SIM_RUN_OBJS): Set to run.o.

2015-03-14  Mike Frysinger  <vapier@gentoo.org>

	* configure.ac (AC_CHECK_HEADERS): Delete.
	* aclocal.m4, configure: Regenerate.

2014-08-19  Alan Modra  <amodra@gmail.com>

	* configure: Regenerate.

2014-08-15  Roland McGrath  <mcgrathr@google.com>

	* configure: Regenerate.
	* config.in: Regenerate.

2014-03-10  Mike Frysinger  <vapier@gentoo.org>

	* interp.c (sim_do_command): Add const to cmd.

2014-03-05  Mike Frysinger  <vapier@gentoo.org>

	* interp.c (sim_load): Add const to prog.

2014-03-04  Mike Frysinger  <vapier@gentoo.org>

	* configure: Regenerate.

2013-09-23  Alan Modra  <amodra@gmail.com>

	* configure: Regenerate.

2013-06-03  Mike Frysinger  <vapier@gentoo.org>

	* aclocal.m4, configure: Regenerate.

2013-05-10  Freddie Chopin  <freddie_chopin@op.pl>

	* configure: Rebuild.

2012-08-28  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>

	* cr16_sim.h: Add defines for TRAP handling.
	* interp.c (sim_complete_command): New stub function.
	* simops.c: Breakpoint handling code.

2012-06-17  Mike Frysinger  <vapier@gentoo.org>

	* interp.c: Include config.h first.  Also include stdlib.h and
	string.h so we can drop the sysdep.h include.

2012-06-15  Joel Brobecker  <brobecker@adacore.com>

	* config.in, configure: Regenerate.

2012-05-24  Pedro Alves  <palves@redhat.com>

	PR gdb/7205

	Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

2012-03-24  Mike Frysinger  <vapier@gentoo.org>

	* aclocal.m4, config.in, configure: Regenerate.

2011-12-30  Mike Frysinger  <vapier@gentoo.org>

	PR sim/12862
	* simops.c (OP_C_C): Only handle TARGET_SYS_fork, TARGET_SYS_execve,
	TARGET_SYS_pipe, TARGET_SYS_rename, and TARGET_SYS_chown when they
	are defined.

2011-12-03  Mike Frysinger  <vapier@gentoo.org>

	* aclocal.m4: New file.
	* configure: Regenerate.

2011-10-17  Mike Frysinger  <vapier@gentoo.org>

	* configure.ac: Change include to common/acinclude.m4.

2011-10-17  Mike Frysinger  <vapier@gentoo.org>

	* configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
	call.  Replace common.m4 include with SIM_AC_COMMON.
	* configure: Regenerate.

2010-04-14  Mike Frysinger  <vapier@gentoo.org>

	* interp.c (sim_write): Add const to buffer arg.

2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* configure: Regenerate.

2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* config.in: Regenerate.
	* configure: Likewise.

	* configure: Regenerate.

2008-07-11  Hans-Peter Nilsson  <hp@axis.com>

	* configure: Regenerate to track ../common/common.m4 changes.
	* config.in: Ditto.

	* interp.c (hash): Remove incorrect prototype.

2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
	    Daniel Jacobowitz  <dan@codesourcery.com>
	    Joseph Myers  <joseph@codesourcery.com>

	* configure: Regenerate.

2008-05-02  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>

	* interp.c: Update the machine code decode algorithm using hash table.
	* Makefile.in, cr16_sim.h, gencode.c and  simops.c: Update for typos
	and coding standards.

2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>

	* ChangeLog, Makefile.in, configure, configure.in, cr16_sim.h,
	gencode.c, interp.c, simops.c, endian.c: Created.
Commit	Line	Data
9db2b719 MF	1	2015-12-24 Mike Frysinger <vapier@gentoo.org>
	2
	3	* sim-if.c (cris_option_install): Delete.
	4	(sim_open): Call sim_add_option_table.
	5	* tconfig.h: Delete sim-module.h include.
	6	(MODULE_INSTALL_FN, MODULE_LIST): Delete.
	7
797eee42 MF	8	2015-11-15 Mike Frysinger <vapier@gentoo.org>
	9
	10	* Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and
	11	sim-stop.o.
	12
9db36cf8 MF	13	2015-11-15 Mike Frysinger <vapier@gentoo.org>
	14
	15	* cr16_sim.h (cr16_callback): Delete.
	16	* interp.c (cr16_callback): Delete.
	17	(do_run): Delete cr16_callback. Replace
	18	cr16_callback->printf_filtered with sim_io_printf.
	19	(sim_open): Delete cr16_callback assignment.
	20	(step_once, sim_create_inferior): Replace
	21	cr16_callback->printf_filtered with sim_io_printf.
	22	* simops.c (move_to_cr, trace_input_func, do_trace_output_flush,
	23	do_trace_output_finish, trace_output_40, trace_output_32,
	24	trace_output_16, trace_output_void, trace_output_flag): Replace
	25	cr16_callback->printf_filtered with sim_io_printf and
	26	cr16_callback->flush_stdout with sim_io_flush_stdout.
	27	(OP_14C_14): Likewise. Rename cr16_callback to cb.
	28
0ef7f981 MF	29	2015-11-15 Mike Frysinger <vapier@gentoo.org>
	30
	31	* Makefile.in (SIM_OBJS): Add sim-reason.o, sim-resume.o, and
	32	sim-stop.o.
	33	* cr16_sim.h (struct _state): Delete exe and exception.
	34	* interp.c (lookup_hash): Call sim_engine_halt instead of setting
	35	State.exception.
	36	(do_run): Delete unused s and func variables.
	37	(stop_simulator, sim_stop, sim_stop_reason): Delete.
	38	(sim_resume): Rename to ...
	39	(step_once): ... this. Delete State.exception code and move
	40	siggnal checking to sim_engine_run.
	41	(sim_engine_run): New function.
	42	* simops.c (EXCEPTION): Define.
	43	(move_to_cr): Call EXCEPTION instead of setting State.exception.
	44	(OP_1_4, OP_18_8, OP_10_10, OP_C0_8, OP_102_14, OP_148_14, OP_D_C,
	45	OP_14_D, OP_15_D, OP_2C00_10, OP_16_D, OP_17_D, OP_31E_10, OP_6_10):
	46	Likewise.
	47	(OP_C_C): Likewise. Call sim_engine_halt instead of setting
	48	State.exception.
	49	(OP_0_20): Call sim_engine_halt instead of setting State.exception.
	50
761e171a MF	51	2015-11-15 Mike Frysinger <vapier@gentoo.org>
	52
	53	* Makefile.in (SIM_OBJS): Delete endian.o.
	54	(INCLUDE): Delete endian.c.
	55	* configure.ac (SIM_AC_OPTION_ENDIAN): Declare little endian.
	56	(SIM_AC_OPTION_ALIGNMENT): release unaligned loads.
	57	* configure: Regenerate.
	58	* cr16_sim.h (IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE,
	59	IMEM_SEGMENTS, DMEM_SEGMENTS, UMEM_SEGMENTS, cr16_memory, dmem_addr,
	60	imem_addr, decode_pc, get_longword, get_word, write_word,
	61	write_longword, READ_16): Delete.
	62	(struct _state): Delete mem member.
	63	(endian.c): Delete include.
	64	(SB, RB, SW, RW, SLW): Rewrite to use sim-core functions.
	65	(get_longword): New function.
	66	(RLW): Rewrite to use get_longword.
	67	* endian.c: Delete file.
	68	* interp.c (map_memory, sim_size, last_segname, last_from, last_to,
	69	IMAP0_OFFSET, DMAP0_OFFSET, DMAP2_SHADDOW, DMAP2_OFFSET,
	70	dmap_register, imap_register, sim_cr16_translate_dmap_addr,
	71	sim_cr16_translate_imap_addr, sim_cr16_translate_addr, map_memory,
	72	xfer_mem, sim_write, sim_read, dmem_addr, imem_addr): Delete.
	73	(do_run): Delete iaddr and replace imem_addr/get_longword with RW.
	74	(sim_open): Call sim_do_commandf. Delete sim_size call.
	75	(sim_resume): Delete iaddr and replace imem_addr/get_longword with
	76	RLW.
	77	* simops.c (MEMPTR): Rewrite to use sim_core_trans_addr.
	78
267b3b8e MF	79	2015-11-15 Mike Frysinger <vapier@gentoo.org>
	80
	81	* cr16_sim.h (struct simops): Add SIM_DESC and SIM_CPU to func args.
	82	(SET_CREG, SET_HW_CREG, SET_PSR_BIT): Pass sd and cpu to move_to_cr.
	83	(dmem_addr, imem_addr, move_to_cr): Add SIM_DESC and SIM_CPU args.
	84	(RB, SW, RW, SLW, RLW): Pass sd and cpu to dmem_addr.
	85	* endian.c: Change cr16_sim.h include to sim-main.h.
	86	* gencode.c: Likewise. Add SIM_DESC and SIM_CPU args to all OPs.
	87	* interp.c (lookup_hash, map_memory, do_run, dmap_register,
	88	imap_register, sim_cr16_translate_dmap_addr, xfer_mem,
	89	sim_cr16_translate_imap_addr, sim_cr16_translate_addr): Add
	90	SIM_DESC and SIM_CPU args and adjust all callers.
	91	(trace_sd): Delete.
	92	(sim_open): Do not assign trace_sd.
	93	(sim_resume, sim_create_inferior): Set up cpu from the first one
	94	in sd.
	95	(cr16_reg_store): Get sim state from cpu.
	96	* simops.c (move_to_cr): Add SIM_DESC and SIM_CPU args.
	97	(trace_input_func, trace_input, do_trace_output_finish,
	98	do_trace_output_finish, trace_output_40, trace_output_32,
	99	trace_output_16, trace_output_void, trace_output_flag): Add
	100	SIM_DESC arg.
	101	(trace_input_func): Likewise. Change trace_sd to sd.
	102	(OP_*): Add SIM_DESC and SIM_CPU args to all OP funcs.
	103
137fbfd2 MF	104	2015-11-15 Mike Frysinger <vapier@gentoo.org>
	105
	106	* cr16_sim.h (get_longlong, write_longlong, WRITE_16, READ_64,
	107	WRITE_64): Delete.
	108	* endian.c (get_longlong, write_longlong): Likewise.
	109
c2270cd8 MF	110	2015-11-15 Mike Frysinger <vapier@gentoo.org>
	111
	112	* Makefile.in (SIM_OBJS): Add sim-reg.o.
	113	* interp.c (cr16_reg_fetch, cr16_reg_store): Add prototypes.
	114	(sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
	115	(cr16_extract_unsigned_integer, cr16_store_unsigned_integer):
	116	New helper functions.
	117	(sim_fetch_register): Rename to ...
	118	(cr16_reg_fetch): ... this. Use cr16_store_unsigned_integer
	119	to write out the updated register values.
	120	(sim_store_register): Rename to ...
	121	(cr16_reg_store): ... this. Use cr16_extract_unsigned_integer
	122	to read in the updated register values.
	123
7ea08e8c MF	124	2015-11-15 Mike Frysinger <vapier@gentoo.org>
	125
	126	* interp.c (sim_open): Delete sim_create_inferior call.
	127
6e4f085c MF	128	2015-11-14 Mike Frysinger <vapier@gentoo.org>
	129
	130	* interp.c (sim_close): Delete.
	131
6637a426 MF	132	2015-11-10 Mike Frysinger <vapier@gentoo.org>
	133
	134	* interp.c (sim_cr16_translate_dmap_addr): Mark static.
	135	(sim_cr16_translate_imap_addr): Likewise.
	136	(sim_cr16_translate_addr): Likewise.
	137
8d0978fb MF	138	2015-06-23 Mike Frysinger <vapier@gentoo.org>
	139
	140	* configure: Regenerate.
	141
a3487082 MF	142	2015-06-12 Mike Frysinger <vapier@gentoo.org>
	143
	144	* configure: Regenerate.
	145
306f4178 MF	146	2015-06-12 Mike Frysinger <vapier@gentoo.org>
	147
	148	* configure: Regenerate.
	149
20bca71d MF	150	2015-04-18 Mike Frysinger <vapier@gentoo.org>
	151
	152	* sim-main.h (SIM_CPU): Delete.
	153
7e83aa92 MF	154	2015-04-18 Mike Frysinger <vapier@gentoo.org>
	155
	156	* sim-main.h (sim_cia): Delete.
	157
034685f9 MF	158	2015-04-17 Mike Frysinger <vapier@gentoo.org>
	159
	160	* sim-main.h (CIA_GET, CIA_SET): Delete.
	161
27b97b40 MF	162	2015-04-17 Mike Frysinger <vapier@gentoo.org>
	163
	164	* interp.c (cr16_pc_get, cr16_pc_set): New functions.
	165	(sim_open): Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
	166
78e9aa70 MF	167	2015-04-15 Mike Frysinger <vapier@gentoo.org>
	168
	169	* Makefile.in (SIM_OBJS): Delete sim-cpu.o.
	170	* sim-main.h (STATE_CPU): Delete.
	171
bf12d44e MF	172	2015-04-13 Mike Frysinger <vapier@gentoo.org>
	173
	174	* configure: Regenerate.
	175
122bbfb5 MF	176	2015-04-06 Mike Frysinger <vapier@gentoo.org>
	177
	178	* Makefile.in (SIM_OBJS): Delete sim-engine.o.
	179
0fe84f3f MF	180	2015-04-01 Mike Frysinger <vapier@gentoo.org>
	181
	182	* interp.c (sim_set_profile, sim_set_profile_size): Delete.
	183
b38f7f34 MF	184	2015-03-31 Mike Frysinger <vapier@gentoo.org>
	185
	186	* Makefile.in (simops.o): New rule.
	187
247ac9ee MF	188	2015-03-29 Mike Frysinger <vapier@gentoo.org>
	189
	190	* cr16_sim.h (text, text_start, text_end, prog_bfd): Delete.
	191	(SEXT8, SEXT16, SEXT32): Undefine.
	192	* interp.c: Delete run-sim.h and cr16_sim.h includes. Include
	193	sim-main.h and sim-options.h.
	194	(myname, sim_kind, init_text_p, prog_bfd_was_opened_p, prog_bfd,
	195	text, text_start, text_end, decode_pc, sim_set_profile,
	196	sim_set_profile_size, sim_set_trace, sim_info, sim_set_callbacks,
	197	sim_trace, sim_complete_command, sim_do_command, sim_load): Delete.
	198	(do_run): Delete prototype.
	199	(INLINE): Delete define.
	200	(do_run, xfer_mem): Pass in SIM_DESC. Set cr16_callback locally from
	201	it.
	202	(sim_size): Mark static.
	203	(sim_write, sim_read): Pass sd to xfer_mem.
	204	(free_state): New function.
	205	(trace_sd): Declare global variable.
	206	(sim_open): Rewrite to use new common logic.
	207	(sim_close): Delete body.
	208	(sim_resume): Pass sd to do_run.
	209	* Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS): Delete.
	210	(SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
	211	* sim-main.h: New file.
	212	* simops.c: Change cr16_sim.h include to sim-main.h.
	213	(trace_input_func): Rewrite pc checks to use trace_sd.
	214
4b0cc5ed MF	215	2015-03-29 Mike Frysinger <vapier@gentoo.org>
	216
	217	* Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK.
	218	* interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL,
	219	ui_loop_hook_counter, deprecated_ui_loop_hook): Delete.
	220	(sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code.
	221
1e504675 MF	222	2015-03-29 Mike Frysinger <vapier@gentoo.org>
	223
	224	* interp.c (old_segment_mapping, ins_type_counters, add_commas,
	225	set_dmap_register, set_imap_register, HELD_SPI_IDX, HELD_SPU_IDX,
	226	spu_register, spi_register, set_spi_register, set_spu_register):
	227	Delete.
	228	(sim_cr16_translate_addr): Delete old_segment_mapping handling.
	229	(sim_open): Likewise.
	230	(sim_info): Delete function body.
	231
5aedb83b MF	232	2015-03-29 Mike Frysinger <vapier@gentoo.org>
	233
	234	* Makefile.in (gencode.o, cr16-opc.o): Add $(WARN_CFLAGS).
	235	(gencode): Add $(BUILD_LDFLAGS).
	236	* endian.c (get_word, get_longword, get_longlong, write_word,
	237	write_longword, write_longlong): Convert old style prototypes.
	238	* gencode.c: Include string.h.
	239	(write_header): Convert old style prototype and fix printf format.
	240	(write_template, write_opcodes): Likewise.
	241	(check_opcodes): Mark static void and put behind #if 0.
	242	* interp.c: Include inttypes.h and run-sim.h.
	243	(add_commas): Delete prototype.
	244	(decode_pc): Convert old style prototype.
	245	(do_run): Change h->op compare to 0.
	246	(add_commas, set_dmap_register, set_imap_register, HELD_SPI_IDX,
	247	HELD_SPU_IDX, spu_register, spi_register, set_spi_register,
	248	set_spu_register): Wrap in #if 0.
	249	(sim_write, sim_read, sim_close, sim_stop, sim_set_callbacks,
	250	sim_stop_reason, sim_fetch_register, sim_store_register,
	251	sim_do_command): Convert old style prototypes.
	252	(sim_create_inferior): Fix pointer cast to use uintptr_t.
	253	* simops.c [HAVE_TIME_H]: Include time.h.
	254	[HAVE_SYS_TIME_H]: Include sys/time.h.
	255	[TARGET_SYS_utime]: Include utime.h.
	256	[TARGET_SYS_wait]: Include sys/wait.h.
	257	(strrchr): Delete prototype.
	258	(cond_stat): Mark static.
	259	(trace_input_func): Mark name static.
	260	(trace_input_func, trace_output_void, trace_output_flag): Convert old style prototypes.
	261	(trace_output_40): Wrap in #if 0.
	262	(OP_*): Convert old style prototypes. Move trace_input call below
	263	all variable decls. Initialize tmp to 0 when appropriate.
	264
ca968da4 MF	265	2015-03-29 Mike Frysinger <vapier@gentoo.org>
	266
	267	* Makefile.in (SIM_EXTRA_CFLAGS): Delete -DSIM_HAVE_ENVIRONMENT.
	268	(interp.o, simops.o, endian.o, table.o): Delete rules.
	269	* configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
	270	SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, and
	271	SIM_AC_OPTION_INLINE.
	272	* config.in, configure: Regenerate.
	273	* interp.c (sim_trace): Define.
	274
ae7d0cac MF	275	2015-03-16 Mike Frysinger <vapier@gentoo.org>
	276
	277	* config.in, configure: Regenerate.
	278
465fb143 MF	279	2015-03-14 Mike Frysinger <vapier@gentoo.org>
	280
	281	* Makefile.in (SIM_EXTRA_CFLAGS): Add
	282	-DSIM_USE_DEPRECATED_RUN_FRONTEND.
	283	(SIM_RUN_OBJS): Set to run.o.
	284
5cddc23a MF	285	2015-03-14 Mike Frysinger <vapier@gentoo.org>
	286
	287	* configure.ac (AC_CHECK_HEADERS): Delete.
	288	* aclocal.m4, configure: Regenerate.
	289
2974be62 AM	290	2014-08-19 Alan Modra <amodra@gmail.com>
	291
	292	* configure: Regenerate.
	293
faa743bb RM	294	2014-08-15 Roland McGrath <mcgrathr@google.com>
	295
	296	* configure: Regenerate.
	297	* config.in: Regenerate.
	298
60d847df MF	299	2014-03-10 Mike Frysinger <vapier@gentoo.org>
	300
	301	* interp.c (sim_do_command): Add const to cmd.
	302
b2b255bd MF	303	2014-03-05 Mike Frysinger <vapier@gentoo.org>
	304
	305	* interp.c (sim_load): Add const to prog.
	306
1a8a700e MF	307	2014-03-04 Mike Frysinger <vapier@gentoo.org>
	308
	309	* configure: Regenerate.
	310
bf3d9781 AM	311	2013-09-23 Alan Modra <amodra@gmail.com>
	312
	313	* configure: Regenerate.
	314
31e6ad7d MF	315	2013-06-03 Mike Frysinger <vapier@gentoo.org>
	316
	317	* aclocal.m4, configure: Regenerate.
	318
d3685d60 TT	319	2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
	320
	321	* configure: Rebuild.
	322
4881a75b MF	323	2012-08-28 Kaushik Phatak <kaushik.phatak@kpitcummins.com>
4881a75b MF	324
5a06d7c4	325	* cr16_sim.h: Add defines for TRAP handling.
4881a75b	326	* interp.c (sim_complete_command): New stub function.
5a06d7c4	327	* simops.c: Breakpoint handling code.
4881a75b	328
26687999 MF	329	2012-06-17 Mike Frysinger <vapier@gentoo.org>
	330
	331	* interp.c: Include config.h first. Also include stdlib.h and
	332	string.h so we can drop the sysdep.h include.
	333
5f3ef9d0 JB	334	2012-06-15 Joel Brobecker <brobecker@adacore.com>
	335
	336	* config.in, configure: Regenerate.
	337
a493e3e2 PA	338	2012-05-24 Pedro Alves <palves@redhat.com>
	339
	340	PR gdb/7205
	341
72f4393d	342	Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
a493e3e2	343
2232061b MF	344	2012-03-24 Mike Frysinger <vapier@gentoo.org>
	345
	346	* aclocal.m4, config.in, configure: Regenerate.
	347
9220438c MF	348	2011-12-30 Mike Frysinger <vapier@gentoo.org>
	349
	350	PR sim/12862
	351	* simops.c (OP_C_C): Only handle TARGET_SYS_fork, TARGET_SYS_execve,
	352	TARGET_SYS_pipe, TARGET_SYS_rename, and TARGET_SYS_chown when they
	353	are defined.
	354
db2e4d67 MF	355	2011-12-03 Mike Frysinger <vapier@gentoo.org>
	356
	357	* aclocal.m4: New file.
	358	* configure: Regenerate.
	359
9c082ca8 MF	360	2011-10-17 Mike Frysinger <vapier@gentoo.org>
	361
	362	* configure.ac: Change include to common/acinclude.m4.
	363
6ffe910a MF	364	2011-10-17 Mike Frysinger <vapier@gentoo.org>
	365
	366	* configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
	367	call. Replace common.m4 include with SIM_AC_COMMON.
	368	* configure: Regenerate.
	369
5558e7e6 MF	370	2010-04-14 Mike Frysinger <vapier@gentoo.org>
	371
	372	* interp.c (sim_write): Add const to buffer arg.
	373
3725885a RW	374	2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
	375
	376	* configure: Regenerate.
	377
d6416cdc RW	378	2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
d6416cdc RW	379
81ecdfbb RW	380	* config.in: Regenerate.
	381	* configure: Likewise.
	382
d6416cdc RW	383	* configure: Regenerate.
d6416cdc RW	384
35e497c8 HPN	385	2008-07-11 Hans-Peter Nilsson <hp@axis.com>
35e497c8 HPN	386
b5bd9624 HPN	387	* configure: Regenerate to track ../common/common.m4 changes.
	388	* config.in: Ditto.
	389
35e497c8 HPN	390	* interp.c (hash): Remove incorrect prototype.
35e497c8 HPN	391
6efef468	392	2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
72f4393d L	393	Daniel Jacobowitz <dan@codesourcery.com>
72f4393d L	394	Joseph Myers <joseph@codesourcery.com>
6efef468 JM	395
	396	* configure: Regenerate.
	397
bff92e66 SR	398	2008-05-02 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
	399
	400	* interp.c: Update the machine code decode algorithm using hash table.
	401	* Makefile.in, cr16_sim.h, gencode.c and simops.c: Update for typos
	402	and coding standards.
	403
fee8ec00 SR	404	2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
fee8ec00 SR	405
72f4393d	406	* ChangeLog, Makefile.in, configure, configure.in, cr16_sim.h,
fee8ec00 SR	407	gencode.c, interp.c, simops.c, endian.c: Created.
fee8ec00 SR	408