binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2 #
   3 #   Copyright (C) 2012-2021 Free Software Foundation, Inc.
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 3 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; see the file COPYING3.  If not see
  17 # <http://www.gnu.org/licenses/>.
  18 #
  19
  20 AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
  21 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
  22
  23 SUBDIRS = doc po
  24
  25 tooldir = $(exec_prefix)/$(target_alias)
  26
  27 ## These aren't set by automake, because they appear in
  28 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  29 ## thus is not seen by automake.
  30 CC_FOR_BUILD = @CC_FOR_BUILD@
  31 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  32
  33 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  34 YFLAGS = -d
  35 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  36 LEXLIB = @LEXLIB@
  37
  38 # Automake 1.10+ disables lex and yacc output file regeneration if
  39 # maintainer mode is disabled.  Avoid this.
  40 am__skiplex =
  41 am__skipyacc =
  42
  43 # This is where we get zlib from.  zlibdir is -L../zlib and zlibinc is
  44 # -I../zlib, unless we were configured with --with-system-zlib, in which
  45 # case both are empty.
  46 ZLIB = @zlibdir@ -lz
  47 ZLIBINC = @zlibinc@
  48
  49 WARN_CFLAGS = @WARN_CFLAGS@
  50 WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
  51 NO_WERROR = @NO_WERROR@
  52 AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC)
  53 AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC)
  54 LIBICONV = @LIBICONV@
  55
  56 DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
  57
  58 # these two are almost the same program
  59 AR_PROG=ar
  60 RANLIB_PROG=ranlib
  61
  62 # objcopy and strip should be the same program
  63 OBJCOPY_PROG=objcopy
  64 STRIP_PROG=strip-new
  65
  66 STRINGS_PROG=strings
  67
  68 READELF_PROG=readelf
  69
  70 ELFEDIT_PROG=elfedit
  71
  72 # These should all be the same program too.
  73 SIZE_PROG=size
  74 NM_PROG=nm-new
  75 OBJDUMP_PROG=objdump
  76
  77 # This is the demangler, as a standalone program.
  78 # Note: This one is used as the installed name too, unlike the above.
  79 DEMANGLER_PROG=cxxfilt
  80
  81 ADDR2LINE_PROG=addr2line
  82
  83 DLLTOOL_PROG=dlltool
  84 WINDRES_PROG=windres
  85 WINDMC_PROG=windmc
  86 DLLWRAP_PROG=dllwrap
  87
  88 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  89
  90 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
  91
  92 bin_SCRIPTS = @BUILD_INSTALL_MISC@
  93 EXTRA_SCRIPTS = embedspu
  94
  95 ## Test programs.
  96 BFDTEST1_PROG = bfdtest1
  97 BFDTEST2_PROG = bfdtest2
  98 GENTESTDLLS_PROG = testsuite/gentestdlls
  99
 100 TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) $(GENTESTDLLS_PROG)
 101
 102 ## We need a special rule to install the programs which are built with
 103 ## -new, and to rename cxxfilt to c++filt.
 104 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
 105 noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@
 106
 107 EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
 108
 109 # Stuff that goes in tooldir/ if appropriate.
 110 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf
 111
 112 BASEDIR = $(srcdir)/..
 113 BFDDIR = $(BASEDIR)/bfd
 114 INCDIR  = $(BASEDIR)/include
 115
 116 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
 117          @HDEFINES@ \
 118          @INCINTL@ \
 119          @LARGEFILE_CPPFLAGS@ \
 120          -DLOCALEDIR="\"$(datadir)/locale\"" \
 121          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
 122
 123 HFILES = \
 124         arsup.h binemul.h bucomm.h budbg.h \
 125         coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h \
 126         objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
 127         windmc.h
 128
 129 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
 130 BUILT_SOURCES = $(GENERATED_HFILES)
 131
 132 CFILES = \
 133         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
 134         coffdump.c coffgrok.c cxxfilt.c \
 135         dwarf.c debug.c dlltool.c dllwrap.c \
 136         elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
 137         is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
 138         nm.c not-ranlib.c not-strip.c \
 139         objcopy.c objdump.c prdbg.c \
 140         od-elf32_avr.c od-macho.c od-xcoff.c \
 141         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 142         resbin.c rescoff.c resrc.c resres.c \
 143         size.c srconv.c stabs.c strings.c sysdump.c \
 144         syslex_wrap.c unwind-ia64.c elfedit.c version.c \
 145         windres.c winduni.c wrstabs.c \
 146         windmc.c mclex.c
 147
 148 GENERATED_CFILES = \
 149         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 150         defparse.c deflex.c rcparse.c mcparse.c
 151
 152 DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c
 153 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 154
 155 # Extra object files for objdump
 156 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
 157
 158 # Code shared by all the binutils.
 159 BULIBS = bucomm.c version.c filemode.c
 160
 161 # Code shared by the ELF related programs.
 162 ELFLIBS = elfcomm.c
 163
 164 BFDLIB = ../bfd/libbfd.la
 165
 166 OPCODES = ../opcodes/libopcodes.la
 167
 168 if ENABLE_LIBCTF
 169 LIBCTF = ../libctf/libctf.la
 170 LIBCTF_NOBFD = ../libctf/libctf-nobfd.la
 171 else
 172 LIBCTF =
 173 LIBCTF_NOBFD =
 174 endif
 175
 176 LIBIBERTY = ../libiberty/libiberty.a
 177
 178 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 179 po/POTFILES.in: @MAINT@ Makefile
 180         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 181           && mv tmp $(srcdir)/po/POTFILES.in
 182
 183 EXPECT = expect
 184 RUNTEST = runtest
 185
 186 CC_FOR_TARGET = ` \
 187   if [ -f $$r/../gcc/xgcc ] ; then \
 188     if [ -f $$r/../newlib/Makefile ] ; then \
 189       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 190     else \
 191       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 192     fi; \
 193   else \
 194     if [ "@host@" = "@target@" ] ; then \
 195       echo $(CC); \
 196     else \
 197       echo gcc | sed '$(transform)'; \
 198     fi; \
 199   fi`
 200
 201 check-DEJAGNU: site.exp
 202         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 203         r=`pwd`; export r; \
 204         LC_ALL=C; export LC_ALL; \
 205         EXPECT=$(EXPECT); export EXPECT; \
 206         runtest=$(RUNTEST); \
 207         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 208           CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \
 209           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 210                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 211                         $(RUNTESTFLAGS); \
 212         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 213         fi
 214
 215 development.exp: $(BFDDIR)/development.sh
 216         $(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh  \
 217           | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
 218
 219 installcheck-local:
 220         /bin/sh $(srcdir)/sanity.sh $(bindir)
 221
 222 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 223 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 224 # non-empty until configure time.  Ugh!
 225 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 226 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(LIBCTF) $(OBJDUMP_PRIVATE_OFILES)
 227 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 228 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 229 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 230 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 231 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 232 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 233 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 234 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 235 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 236 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 237 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 238 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 239 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 240 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 241 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(LIBCTF_NOBFD)
 242 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
 243 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 244 bfdtest1_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 245 bfdtest2_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 246
 247 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 248
 249 size_SOURCES = size.c $(BULIBS)
 250
 251 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 252
 253 strings_SOURCES = strings.c $(BULIBS)
 254
 255 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
 256 readelf_LDADD   = $(LIBCTF_NOBFD) $(LIBINTL) $(LIBIBERTY) $(ZLIB) $(DEBUGINFOD_LIBS)
 257
 258 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
 259 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
 260
 261 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 262
 263 nm_new_SOURCES = nm.c $(BULIBS)
 264
 265 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
 266 EXTRA_objdump_SOURCES = od-xcoff.c
 267 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) $(DEBUGINFOD_LIBS)
 268
 269 objdump.@OBJEXT@:objdump.c
 270 if am__fastdepCC
 271         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 272         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 273 else
 274 if AMDEP
 275         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 276         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 277 endif
 278         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 279 endif
 280
 281 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 282
 283 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 284         emul_$(EMULATION).c $(BULIBS)
 285 EXTRA_ar_SOURCES = $(CFILES)
 286 ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 287
 288 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 289         binemul.c emul_$(EMULATION).c $(BULIBS)
 290 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 291
 292 addr2line_SOURCES = addr2line.c $(BULIBS)
 293
 294 # The following is commented out for the conversion to automake.
 295 # This rule creates a single binary that switches between ar and ranlib
 296 # by looking at argv[0].  Use this kludge to save some disk space.
 297 # However, you have to install things by hand.
 298 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 299 # Alternatively, you can install ranlib.sh as ranlib.
 300 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 301 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 302 #       -rm -f $(RANLIB_PROG)
 303 #       -ln $(AR_PROG) $(RANLIB_PROG)
 304 #
 305 # objcopy and strip in one binary that uses argv[0] to decide its action.
 306 #
 307 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 308 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 309 #       -rm -f $(STRIP_PROG)
 310 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 311
 312 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 313         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 314         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 315         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 316
 317 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 318         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 319
 320 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 321         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 322
 323 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
 324         $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
 325
 326 sysinfo.@OBJEXT@: sysinfo.c
 327         if [ -r sysinfo.c ]; then \
 328           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
 329         else \
 330           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
 331         fi
 332
 333 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
 334         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
 335
 336 embedspu: embedspu.sh Makefile
 337         awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
 338         chmod a+x $@
 339
 340 # We need these for parallel make.
 341 sysinfo.h: sysinfo.c
 342
 343 # Disable -Werror, if it has been enabled, since old versions of bison/
 344 # yacc will produce working code which contain compile time warnings.
 345 arparse.@OBJEXT@: arparse.c
 346 if am__fastdepCC
 347         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 348         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 349 else
 350 if AMDEP
 351         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 352         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 353 endif
 354         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 355 endif
 356
 357 arlex.@OBJEXT@: arlex.c
 358 if am__fastdepCC
 359         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 360         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 361 else
 362 if AMDEP
 363         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 364         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 365 endif
 366         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 367 endif
 368
 369 sysroff.@OBJEXT@: sysroff.c
 370 if am__fastdepCC
 371         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 372         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 373 else
 374 if AMDEP
 375         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 376         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 377 endif
 378         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 379 endif
 380
 381 defparse.@OBJEXT@: defparse.c
 382 if am__fastdepCC
 383         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 384         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 385 else
 386 if AMDEP
 387         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 388         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 389 endif
 390         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 391 endif
 392
 393 deflex.@OBJEXT@: deflex.c
 394 if am__fastdepCC
 395         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 396         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 397 else
 398 if AMDEP
 399         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 400         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 401 endif
 402         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 403 endif
 404
 405 rcparse.@OBJEXT@: rcparse.c
 406 if am__fastdepCC
 407         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 408         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 409 else
 410 if AMDEP
 411         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 412         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 413 endif
 414         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 415 endif
 416
 417 mcparse.@OBJEXT@: mcparse.c
 418 if am__fastdepCC
 419         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 420         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 421 else
 422 if AMDEP
 423         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 424         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 425 endif
 426         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 427 endif
 428
 429 rclex.@OBJEXT@: rclex.c
 430 if am__fastdepCC
 431         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 432         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 433 else
 434 if AMDEP
 435         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 436         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 437 endif
 438         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 439 endif
 440
 441 mclex.@OBJEXT@: mclex.c
 442 if am__fastdepCC
 443         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 444         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 445 else
 446 if AMDEP
 447         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 448         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 449 endif
 450         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 451 endif
 452
 453 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 454 srconv.@OBJEXT@: sysroff.c
 455
 456 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 457 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 458
 459 dlltool.@OBJEXT@:
 460 if am__fastdepCC
 461         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 462         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 463 else
 464 if AMDEP
 465         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 466         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 467 endif
 468         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 469 endif
 470
 471 rescoff.@OBJEXT@:
 472 if am__fastdepCC
 473         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 474         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 475 else
 476 if AMDEP
 477         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 478         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 479 endif
 480         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 481 endif
 482
 483 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 484
 485 sysdump_SOURCES = sysdump.c $(BULIBS)
 486 sysdump.@OBJEXT@: sysroff.c
 487
 488 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 489         winduni.c resres.c $(BULIBS)
 490 windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
 491
 492 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 493         winduni.c $(BULIBS)
 494 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
 495
 496 dllwrap_SOURCES = dllwrap.c version.c
 497 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 498
 499
 500 EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \
 501         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 502         mcparse.h mcparse.c embedspu.sh
 503
 504 diststuff: $(EXTRA_DIST) info
 505 all: info
 506
 507 # development.sh is used to determine -Werror default.
 508 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh
 509
 510 EXTRA_DEJAGNU_SITE_CONFIG = development.exp
 511
 512 DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \
 513   site.bak embedspu
 514
 515 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 516   binutils.log binutils.sum abcdefgh*
 517 mostlyclean-local:
 518         -rm -rf tmpdir
 519
 520 .PHONY: install-exec-local
 521
 522 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 523         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 524           if test -f $$p$(EXEEXT); then \
 525             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 526             $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 527           else :; fi; \
 528         done
 529         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 530         for i in $(TOOL_PROGS); do \
 531           if [ -f $$i$(EXEEXT) ]; then \
 532             j=`echo $$i | sed -e 's/-new//'`; \
 533             k=`echo $$j | sed '$(transform)'`; \
 534             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 535               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 536               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 537                 || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 538             fi; \
 539           else true; \
 540           fi; \
 541         done