gas/testsuite/gas/elf/elf.exp

   1 #
   2 # elf tests
   3 #
   4
   5 proc run_elf_list_test { name suffix opts readelf_opts readelf_pipe } {
   6     global READELF
   7     global srcdir subdir
   8     set testname "elf $name list"
   9     set file $srcdir/$subdir/$name
  10     gas_run ${name}.s "$opts -o dump.o" ">&dump.out"
  11     if { ![string match "" $opts]
  12           && [regexp_diff "dump.out" "${file}.l"] } then {
  13         fail $testname
  14         verbose "output is [file_contents "dump.out"]" 2
  15         return
  16     }
  17     send_log "$READELF $readelf_opts dump.o $readelf_pipe > dump.out\n"
  18     set status [gas_host_run "$READELF $readelf_opts dump.o" ">readelf.out"]
  19     if { [lindex $status 0] != 0 || ![string match "" [lindex $status 1]] } then {
  20         send_log "[lindex $status 1]\n"
  21         fail $testname
  22         return
  23     }
  24     catch "exec cat readelf.out $readelf_pipe > dump.out\n" comp_output
  25     if ![string match "" $comp_output] then {
  26         send_log "$comp_output\n"
  27         fail $testname
  28         return
  29     }
  30     verbose_eval {[file_contents "dump.out"]} 3
  31     if { [regexp_diff "dump.out" "${file}.e${suffix}"] } then {
  32         fail $testname
  33         verbose "output is [file_contents "dump.out"]" 2
  34         return
  35     }
  36     pass $testname
  37 }
  38
  39 # We're testing bits in obj-elf -- don't run on anything else.
  40 if { ([istarget "*-*-*elf*"]
  41       || [istarget "*-*-linux*"]
  42       || [istarget "*-*-gnu*"]
  43       || [istarget "m6811-*"]
  44       || [istarget "m6812-*"]
  45       || [istarget "sparc*-*-solaris*"]
  46       || [istarget "mips*-*-irix6*"]
  47       || [istarget "arm*-*-eabi"])
  48      && ![istarget *-*-linux*aout*]
  49      && ![istarget *-*-linux*coff*]
  50      && ![istarget *-*-linux*oldld*]
  51      && ![istarget sh64*-*-linux*]
  52 } then {
  53     set target_machine ""
  54     if {[istarget "mips*-*-*"]} then {
  55         set target_machine -mips
  56     }
  57     if {[istarget m32r*-*-*]} then {
  58         set target_machine -m32r
  59     }
  60     if {[istarget "score-*-*"]} then {
  61         set target_machine -score
  62     }
  63     if {[istarget "tic6x-*-*"]} then {
  64         set target_machine -tic6x
  65     }
  66     if {[istarget "xtensa*-*-*"]} then {
  67         set target_machine -xtensa
  68     }
  69     if {[istarget "rx-*-*"]} then {
  70         set target_machine -rx
  71     }
  72     if {[istarget "arm*-*-*"]} {
  73
  74         if { ([istarget "*-*-*eabi"]
  75               || [istarget "*-*-linux-*"]
  76               || [istarget "*-*-symbianelf"])} then {
  77             set target_machine -armeabi
  78         } else {
  79             set target_machine -armelf
  80         }
  81     }
  82
  83     # The MN10300 and Xtensa ports disable the assembler's call frame
  84     # optimization because it interfers with link-time relaxation of
  85     # function prologues.
  86     if {![istarget "mn10300-*-*"]
  87         && ![istarget "xtensa*-*-*"]
  88         && ![istarget "am3*-*-*"]} then {
  89       run_dump_test "ehopt0"
  90     }
  91     case $target_triplet in {
  92         { m68k-*-* m68[03]??-*-* } {
  93             run_dump_test "file" { { as "--defsym m68k=1" } }
  94         }
  95         { mmix-*-* } {
  96             run_dump_test "file" { { as "--defsym mmix=1" } }
  97         }
  98         { xtensa*-*-* } {
  99             run_dump_test "file" { { as "--rename-section file.s=file.c" } }
 100         }
 101         default {
 102             run_dump_test "file"
 103         }
 104     }
 105     run_dump_test "group0a"
 106     run_dump_test "group0b"
 107     run_dump_test "group0c"
 108     run_dump_test "group1a"
 109     run_dump_test "group1b"
 110     run_dump_test "groupautoa"
 111     case $target_triplet in {
 112         { xtensa*-*-* } { }
 113         default {
 114             run_dump_test "groupautob"
 115         }
 116     }
 117     case $target_triplet in {
 118         { alpha*-*-* } { }
 119         { cr16*-*-* } { }
 120         { crx*-*-* } { }
 121         { h8300-*-* } { }
 122         { hppa*-*-* } { }
 123         { iq2000*-*-* } { }
 124         { mips*-*-* } { }
 125         { mn10200-*-* } { }
 126         { mn10300-*-* } { }
 127         { *c54x*-*-* } { }
 128         { rx-*-* } { }
 129         default {
 130             # The next test can fail if the target does not convert fixups
 131             # against ordinary symbols into relocations against section symbols.
 132             # This is usually revealed by the error message:
 133             #  symbol `sym' required but not present
 134             run_dump_test redef
 135             run_dump_test equ-reloc
 136         }
 137     }
 138     run_dump_test "pseudo"
 139     run_dump_test "section0"
 140     run_dump_test "section1"
 141     if {! [istarget "h8300-*-*"]} then {
 142         # The h8300 port issues a warning message for
 143         # new sections created without atrributes.
 144         run_elf_list_test "section2" "$target_machine" "-al" "-s" ""
 145     }
 146     run_dump_test "section3"
 147     run_dump_test "section4"
 148     if {! [istarget "h8300-*-*"] && ! [istarget "rx-*-*"]} then {
 149         # The h8300 port issues a warning message for
 150         # new sections created without atrributes.
 151         # The RX port does not complain about changing the attributes of the
 152         # .data and .bss sections since it does not use those names.
 153         run_elf_list_test "section5" "" "-al" "-SW" "| grep \" \\\\.test\\\[0-9\\\]\""
 154     }
 155     run_dump_test "struct"
 156     if { ![istarget "alpha*-*-*"] } then {
 157         # The alpha port uses .set for state, e.g. nomacro.
 158         run_dump_test "symtab"
 159     }
 160     run_dump_test "symver"
 161
 162     # The MSP port sets the ELF header's OSABI field to ELFOSABI_STANDALONE.
 163     # The non-eabi ARM ports sets it to ELFOSABI_ARM.
 164     # So for these targets we cannot include an IFUNC symbol type
 165     # in the symbol type test.
 166     if {   [istarget "msp*-*-*"]
 167         || [istarget "arm*-*-*"]} then {
 168             run_elf_list_test "type-noifunc" "" "" "-s" "| grep \"1 *\\\[FONTC\\\]\""
 169     } else {
 170             run_dump_test ifunc-1
 171             run_elf_list_test "type" "" "" "-s" "| grep \"1 *\\\[FIONTCU\\\]\""
 172     }
 173
 174     run_dump_test "section6"
 175     run_dump_test "section7"
 176     run_dump_test "section8"
 177     run_dump_test "section9"
 178     run_dump_test "dwarf2-1"
 179     run_dump_test "dwarf2-2"
 180     run_dump_test "dwarf2-3"
 181     run_dump_test "dwarf2-4"
 182     run_dump_test "bad-section-flag"
 183     run_dump_test "bad-size"
 184     run_dump_test "bad-group"
 185
 186 load_lib gas-dg.exp
 187 dg-init
 188 dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/err-*.s $srcdir/$subdir/warn-*.s]] "" ""
 189 dg-finish
 190
 191 }