ld/scripttempl/armbpabi.sc

   1 # This variant of elf.sc is used for ARM BPABI platforms, like Symbian
   2 # OS, where a separate postlinker will operated on the generated
   3 # executable or shared object.  See elf.sc for configuration variables
   4 # that apply; only BPABI-specific variables will be noted here.
   5 #
   6 # Copyright (C) 2014-2021 Free Software Foundation, Inc.
   7 #
   8 # Copying and distribution of this file, with or without modification,
   9 # are permitted in any medium without royalty provided the copyright
  10 # notice and this notice are preserved.
  11
  12 test -z "$ENTRY" && ENTRY=_start
  13 test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
  14 test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
  15 if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
  16 test -z "${ELFSIZE}" && ELFSIZE=32
  17 test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
  18 test "$LD_FLAG" = "N" && DATA_ADDR=.
  19 test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
  20 test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
  21 test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
  22 DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
  23 DATA_SEGMENT_RELRO_END=""
  24 DATA_SEGMENT_RELRO_GOTPLT_END=""
  25 DATA_SEGMENT_END=""
  26 if test -n "${COMMONPAGESIZE}"; then
  27   DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
  28   DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
  29   if test -n "${SEPARATE_GOTPLT}"; then
  30     DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (. + ${SEPARATE_GOTPLT});"
  31   else
  32     DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (.);"
  33   fi
  34 fi
  35 INTERP=".interp       0 : { *(.interp) }"
  36 PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
  37 RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
  38 DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro .data.rel.ro.*) }"
  39 DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink)  *(.gnu.lto_*) }"
  40 if test -z "${NO_SMALL_DATA}"; then
  41   SBSS=".sbss         ${RELOCATING-0} :
  42   {
  43     ${RELOCATING+PROVIDE (__sbss_start = .);}
  44     ${RELOCATING+PROVIDE (___sbss_start = .);}
  45     ${RELOCATING+*(.dynsbss)}
  46     *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
  47     ${RELOCATING+*(.scommon)}
  48     ${RELOCATING+PROVIDE (__sbss_end = .);}
  49     ${RELOCATING+PROVIDE (___sbss_end = .);}
  50   }"
  51   SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
  52   SDATA="/* We want the small data sections together, so single-instruction offsets
  53      can access them all, and initialized data all before uninitialized, so
  54      we can shorten the on-disk segment size.  */
  55   .sdata        ${RELOCATING-0} :
  56   {
  57     ${RELOCATING+${SDATA_START_SYMBOLS}}
  58     *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
  59   }"
  60   SDATA2=".sdata2       ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
  61   REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
  62   .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
  63   REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
  64   .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
  65   REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
  66   .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
  67   REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
  68   .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
  69 else
  70   NO_SMALL_DATA=" "
  71 fi
  72 test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
  73 INIT_ARRAY=".init_array   ${RELOCATING-0} :
  74   {
  75     /* SymbianOS uses this symbol.  */
  76     ${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Base = .);}
  77     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}}
  78     KEEP (*(SORT(.init_array.*)))
  79     KEEP (*(.init_array))
  80     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}}
  81     /* SymbianOS uses this symbol.  */
  82     ${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Limit = .);}
  83   }"
  84 FINI_ARRAY=".fini_array   ${RELOCATING-0} :
  85   {
  86     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}}
  87     KEEP (*(SORT(.fini_array.*)))
  88     KEEP (*(.fini_array))
  89     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}}
  90   }"
  91 CTOR=".ctors        ${CONSTRUCTING-0} :
  92   {
  93     ${CONSTRUCTING+${CTOR_START}}
  94     /* gcc uses crtbegin.o to find the start of
  95        the constructors, so we make sure it is
  96        first.  Because this is a wildcard, it
  97        doesn't matter if the user does not
  98        actually link against crtbegin.o; the
  99        linker won't look for a file to match a
 100        wildcard.  The wildcard also means that it
 101        doesn't matter which directory crtbegin.o
 102        is in.  */
 103
 104     KEEP (*crtbegin.o(.ctors))
 105     KEEP (*crtbegin?.o(.ctors))
 106
 107     /* We don't want to include the .ctor section from
 108        the crtend.o file until after the sorted ctors.
 109        The .ctor section from the crtend file contains the
 110        end of ctors marker and it must be last */
 111
 112     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
 113     KEEP (*(SORT(.ctors.*)))
 114     KEEP (*(.ctors))
 115     ${CONSTRUCTING+${CTOR_END}}
 116   }"
 117 DTOR=".dtors        ${CONSTRUCTING-0} :
 118   {
 119     ${CONSTRUCTING+${DTOR_START}}
 120     KEEP (*crtbegin.o(.dtors))
 121     KEEP (*crtbegin?.o(.dtors))
 122     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
 123     KEEP (*(SORT(.dtors.*)))
 124     KEEP (*(.dtors))
 125     ${CONSTRUCTING+${DTOR_END}}
 126   }"
 127 STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
 128   {
 129     ${RELOCATING+_stack = .;}
 130     *(.stack)
 131   }"
 132
 133 TEXT_START_ADDR="SEGMENT_START(\"text\", ${TEXT_START_ADDR})"
 134 SHLIB_TEXT_START_ADDR="SEGMENT_START(\"text\", ${SHLIB_TEXT_START_ADDR:-0})"
 135 DATA_ADDR="SEGMENT_START(\"data\", ${DATA_ADDR-${DATA_SEGMENT_ALIGN}})"
 136 SHLIB_DATA_ADDR="SEGMENT_START(\"data\", ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}})"
 137
 138 # If this is for an embedded system, don't add SIZEOF_HEADERS.
 139 if [ -z "$EMBEDDED" ]; then
 140    test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
 141    SHLIB_BASE_ADDRESS="${SHLIB_TEXT_START_ADDR} + SIZEOF_HEADERS"
 142 else
 143    test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
 144    SHLIB_BASE_ADDRESS="${SHLIB_TEXT_START_ADDR}"
 145 fi
 146
 147 cat <<EOF
 148 /* Copyright (C) 2014-2021 Free Software Foundation, Inc.
 149
 150    Copying and distribution of this script, with or without modification,
 151    are permitted in any medium without royalty provided the copyright
 152    notice and this notice are preserved.  */
 153
 154 OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
 155               "${LITTLE_OUTPUT_FORMAT}")
 156 OUTPUT_ARCH(${OUTPUT_ARCH})
 157 EOF
 158
 159 test -n "${RELOCATING}" && cat <<EOF
 160 ENTRY(${ENTRY})
 161
 162 ${LIB_SEARCH_DIRS}
 163 /* Do we need any of these for elf?
 164    __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */
 165 ${EXECUTABLE_SYMBOLS}
 166 ${INPUT_FILES}
 167
 168 /* ARM's proprietary toolchain generate these symbols to match the start
 169    and end of particular sections of the image.  SymbianOS uses these
 170    symbols.  We provide them for compatibility with ARM's toolchains.
 171    These symbols should be bound locally; each shared object may define
 172    its own version of these symbols.  */
 173
 174 VERSION
 175 {
 176   /* Give these a dummy version to work around linker lameness.
 177      The name used shouldn't matter as these are all local symbols.  */
 178   __GNU {
 179     local:
 180       Image\$\$ER_RO\$\$Base;
 181       Image\$\$ER_RO\$\$Limit;
 182       SHT\$\$INIT_ARRAY\$\$Base;
 183       SHT\$\$INIT_ARRAY\$\$Limit;
 184       .ARM.exidx\$\$Base;
 185       .ARM.exidx\$\$Limit;
 186   };
 187 }
 188
 189 EOF
 190
 191 cat <<EOF
 192 SECTIONS
 193 {
 194   /* Read-only sections, merged into text segment: */
 195   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR});}}}
 196
 197   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+ . = ${TEXT_BASE_ADDRESS};}}}
 198   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}}
 199   ${CREATE_PIE+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}}
 200
 201   /* Define Image\$\$ER_RO\$\$Base.  */
 202   ${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Base = .);}
 203
 204   ${INITIAL_READONLY_SECTIONS}
 205
 206 EOF
 207 cat <<EOF
 208   .init         ${RELOCATING-0} :
 209   {
 210     ${RELOCATING+${INIT_START}}
 211     KEEP (*(SORT_NONE(.init)))
 212     ${RELOCATING+${INIT_END}}
 213   } =${NOP-0}
 214   .text         ${RELOCATING-0} :
 215   {
 216     ${RELOCATING+${TEXT_START_SYMBOLS}}
 217     *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
 218     /* .gnu.warning sections are handled specially by elf.em.  */
 219     *(.gnu.warning)
 220     ${RELOCATING+${OTHER_TEXT_SECTIONS}}
 221   } =${NOP-0}
 222   .fini         ${RELOCATING-0} :
 223   {
 224     ${RELOCATING+${FINI_START}}
 225     KEEP (*(SORT_NONE(.fini)))
 226     ${RELOCATING+${FINI_END}}
 227   } =${NOP-0}
 228   /* The SymbianOS kernel requires that the PLT go at the end of the
 229      text section.  */
 230   ${DATA_PLT-${BSS_PLT-${PLT}}}
 231   ${RELOCATING+PROVIDE (__etext = .);}
 232   ${RELOCATING+PROVIDE (_etext = .);}
 233   ${RELOCATING+PROVIDE (etext = .);}
 234
 235   /* Define Image\$\$ER_RO\$\$Limit.  */
 236   ${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Limit = .);}
 237
 238   ${WRITABLE_RODATA-${RODATA}}
 239   .rodata1      ${RELOCATING-0} : { *(.rodata1) }
 240   ${CREATE_SHLIB-${SDATA2}}
 241   ${CREATE_SHLIB-${SBSS2}}
 242
 243   /* On SymbianOS, put  .init_array and friends in the read-only
 244      segment; there is no runtime relocation applied to these
 245      arrays.  */
 246
 247   .preinit_array   ${RELOCATING-0} :
 248   {
 249     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}}
 250     KEEP (*(.preinit_array))
 251     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}}
 252   }
 253   ${RELOCATING+${INIT_ARRAY}}
 254   ${RELOCATING+${FINI_ARRAY}}
 255
 256   ${OTHER_READONLY_SECTIONS}
 257   .eh_frame_hdr ${RELOCATING-0} : { *(.eh_frame_hdr) }
 258   .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
 259   .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table${RELOCATING+ .gcc_except_table.*})) }
 260
 261   /* Adjust the address for the data segment.  We want to adjust up to
 262      the same address within the page on the next page up.  */
 263   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR};}}}
 264   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR};}}
 265   ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR};}}
 266
 267   /* Exception handling  */
 268   .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
 269   .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table${RELOCATING+ .gcc_except_table.*})) }
 270
 271   /* Thread Local Storage sections  */
 272   .tdata        ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
 273   .tbss         ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
 274
 275   ${RELOCATING+${CTOR}}
 276   ${RELOCATING+${DTOR}}
 277   .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
 278
 279   ${RELOCATING+${DATARELRO}}
 280   ${OTHER_RELRO_SECTIONS}
 281   ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
 282
 283   ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
 284
 285   .data         ${RELOCATING-0} :
 286   {
 287     ${RELOCATING+${DATA_START_SYMBOLS}}
 288     *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
 289     ${CONSTRUCTING+SORT(CONSTRUCTORS)}
 290   }
 291   .data1        ${RELOCATING-0} : { *(.data1) }
 292   ${WRITABLE_RODATA+${RODATA}}
 293   ${OTHER_READWRITE_SECTIONS}
 294   ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
 295   ${CREATE_SHLIB+${SDATA2}}
 296   ${CREATE_SHLIB+${SBSS2}}
 297   ${SDATA}
 298   ${OTHER_SDATA_SECTIONS}
 299   ${RELOCATING+_edata = .;}
 300   ${RELOCATING+PROVIDE (edata = .);}
 301   ${RELOCATING+. = DEFINED(__bss_segment_start) ? __bss_segment_start : .;}
 302   ${RELOCATING+__bss_start = .;}
 303   ${RELOCATING+${OTHER_BSS_SYMBOLS}}
 304   ${SBSS}
 305   ${BSS_PLT+${PLT}}
 306   .bss          ${RELOCATING-0} :
 307   {
 308    ${RELOCATING+*(.dynbss)}
 309    *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
 310    ${RELOCATING+*(COMMON)
 311    /* Align here to ensure that the .bss section occupies space up to
 312       _end.  Align after .bss to ensure correct alignment even if the
 313       .bss section disappears because there are no input sections.  */
 314    . = ALIGN(${ALIGNMENT});}
 315   }
 316   ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
 317   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
 318   ${RELOCATING+${OTHER_END_SYMBOLS}}
 319   ${RELOCATING+_end = .;}
 320   ${RELOCATING+PROVIDE (end = .);}
 321   ${RELOCATING+${DATA_SEGMENT_END}}
 322   ${STACK_ADDR+${STACK}}
 323
 324   /* These sections are not mapped under the BPABI.  */
 325   .dynamic      0 : { *(.dynamic) }
 326   .hash         0 : { *(.hash) }
 327   .dynsym       0 : { *(.dynsym) }
 328   .dynstr       0 : { *(.dynstr) }
 329   .gnu.version  0 : { *(.gnu.version) }
 330   .gnu.version_d 0: { *(.gnu.version_d) }
 331   .gnu.version_r 0: { *(.gnu.version_r) }
 332   ${CREATE_SHLIB-${INTERP}}
 333
 334   /* Stabs debugging sections.  */
 335   .stab          0 : { *(.stab) }
 336   .stabstr       0 : { *(.stabstr) }
 337   .stab.excl     0 : { *(.stab.excl) }
 338   .stab.exclstr  0 : { *(.stab.exclstr) }
 339   .stab.index    0 : { *(.stab.index) }
 340   .stab.indexstr 0 : { *(.stab.indexstr) }
 341
 342   .comment       0 : { *(.comment) }
 343 EOF
 344
 345 . $srcdir/scripttempl/DWARF.sc
 346
 347 cat <<EOF
 348   ${OTHER_SECTIONS}
 349   ${RELOCATING+${OTHER_SYMBOLS}}
 350   ${RELOCATING+${DISCARDED}}
 351 EOF
 352
 353 # These relocations sections are part of the read-only segment in SVR4
 354 # executables, but are not mapped in BPABI executables.
 355 if [ "x$COMBRELOC" = x ]; then
 356   COMBRELOCCAT=cat
 357 else
 358   COMBRELOCCAT="cat > $COMBRELOC"
 359 fi
 360 eval $COMBRELOCCAT <<EOF
 361   .rel.init     0 : { *(.rel.init) }
 362   .rela.init    0 : { *(.rela.init) }
 363   .rel.text     0 : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
 364   .rela.text    0 : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
 365   .rel.fini     0 : { *(.rel.fini) }
 366   .rela.fini    0 : { *(.rela.fini) }
 367   .rel.rodata   0 : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
 368   .rela.rodata  0 : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
 369   ${OTHER_READONLY_RELOC_SECTIONS}
 370   .rel.data.rel.ro 0 : { *(.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.*}) }
 371   .rela.data.rel.ro 0 : { *(.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.*}) }
 372   .rel.data     0 : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
 373   .rela.data    0 : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
 374   .rel.tdata    0 : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
 375   .rela.tdata   0 : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
 376   .rel.tbss     0 : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
 377   .rela.tbss    0 : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
 378   .rel.ctors    0 : { *(.rel.ctors) }
 379   .rela.ctors   0 : { *(.rela.ctors) }
 380   .rel.dtors    0 : { *(.rel.dtors) }
 381   .rela.dtors   0 : { *(.rela.dtors) }
 382   ${REL_SDATA}
 383   ${REL_SBSS}
 384   ${REL_SDATA2}
 385   ${REL_SBSS2}
 386   .rel.bss      0 : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
 387   .rela.bss     0 : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
 388   .rel.init_array  0 : { *(.rel.init_array) }
 389   .rela.init_array 0 : { *(.rela.init_array) }
 390   .rel.fini_array  0 : { *(.rel.fini_array) }
 391   .rela.fini_array 0 : { *(.rela.fini_array) }
 392 EOF
 393 if [ -n "$COMBRELOC" ]; then
 394 cat <<EOF
 395   .rel.dyn      0 :
 396     {
 397 EOF
 398 sed -e '/^[      ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
 399 cat <<EOF
 400     }
 401   .rela.dyn     0 :
 402     {
 403 EOF
 404 sed -e '/^[      ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
 405 cat <<EOF
 406     }
 407 EOF
 408 fi
 409 cat <<EOF
 410   .rel.plt      0 : { *(.rel.plt) }
 411   .rela.plt     0 : { *(.rela.plt) }
 412   ${OTHER_PLT_RELOC_SECTIONS}
 413   .rel.other    0 : { *(.rel.*) }
 414   .rela.other   0 : { *(.rela.*) }
 415   .reli.other   0 : { *(.reli.*) }
 416 }
 417 EOF