ld/scripttempl/mep.sc

   1 # Copyright (C) 2014-2021 Free Software Foundation, Inc.
   2 #
   3 # Copying and distribution of this file, with or without modification,
   4 # are permitted in any medium without royalty provided the copyright
   5 # notice and this notice are preserved.
   6 #
   7 # Unusual variables checked by this code:
   8 #       NOP - four byte opcode for no-op (defaults to 0)
   9 #       NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
  10 #               empty.
  11 #       SMALL_DATA_CTOR - .ctors contains small data.
  12 #       SMALL_DATA_DTOR - .dtors contains small data.
  13 #       DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
  14 #       INITIAL_READONLY_SECTIONS - at start of text segment
  15 #       OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
  16 #               (e.g., .PARISC.milli)
  17 #       OTHER_TEXT_SECTIONS - these get put in .text when relocating
  18 #       OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
  19 #               (e.g., .PARISC.global)
  20 #       OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
  21 #               (e.g. PPC32 .fixup, .got[12])
  22 #       OTHER_BSS_SECTIONS - other than .bss .sbss ...
  23 #       OTHER_SECTIONS - at the end
  24 #       EXECUTABLE_SYMBOLS - symbols that must be defined for an
  25 #               executable (e.g., _DYNAMIC_LINK)
  26 #       TEXT_START_ADDR - the first byte of the text segment, after any
  27 #               headers.
  28 #       TEXT_BASE_ADDRESS - the first byte of the text segment.
  29 #       TEXT_START_SYMBOLS - symbols that appear at the start of the
  30 #               .text section.
  31 #       DATA_START_SYMBOLS - symbols that appear at the start of the
  32 #               .data section.
  33 #       OTHER_GOT_SYMBOLS - symbols defined just before .got.
  34 #       OTHER_GOT_SECTIONS - sections just after .got.
  35 #       OTHER_SDATA_SECTIONS - sections just after .sdata.
  36 #       OTHER_BSS_SYMBOLS - symbols that appear at the start of the
  37 #               .bss section besides __bss_start.
  38 #       DATA_PLT - .plt should be in data segment, not text segment.
  39 #       PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
  40 #       BSS_PLT - .plt should be in bss segment
  41 #       TEXT_DYNAMIC - .dynamic in text segment, not data segment.
  42 #       EMBEDDED - whether this is for an embedded system.
  43 #       SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
  44 #               start address of shared library.
  45 #       INPUT_FILES - INPUT command of files to always include
  46 #       WRITABLE_RODATA - if set, the .rodata section should be writable
  47 #       INIT_START, INIT_END -  statements just before and just after
  48 #       combination of .init sections.
  49 #       FINI_START, FINI_END - statements just before and just after
  50 #       combination of .fini sections.
  51 #       STACK_ADDR - start of a .stack section.
  52 #       OTHER_END_SYMBOLS - symbols to place right at the end of the script.
  53 #       SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
  54 #               so that .got can be in the RELRO area.  It should be set to
  55 #               the number of bytes in the beginning of .got.plt which can be
  56 #               in the RELRO area as well.
  57 #
  58 # When adding sections, do note that the names of some sections are used
  59 # when specifying the start address of the next.
  60 #
  61
  62 #  Many sections come in three flavours.  There is the 'real' section,
  63 #  like ".data".  Then there are the per-procedure or per-variable
  64 #  sections, generated by -ffunction-sections and -fdata-sections in GCC,
  65 #  and useful for --gc-sections, which for a variable "foo" might be
  66 #  ".data.foo".  Then there are the linkonce sections, for which the linker
  67 #  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
  68 #  The exact correspondences are:
  69 #
  70 #  Section      Linkonce section
  71 #  .text        .gnu.linkonce.t.foo
  72 #  .rodata      .gnu.linkonce.r.foo
  73 #  .data        .gnu.linkonce.d.foo
  74 #  .bss         .gnu.linkonce.b.foo
  75 #  .sdata       .gnu.linkonce.s.foo
  76 #  .sbss        .gnu.linkonce.sb.foo
  77 #  .sdata2      .gnu.linkonce.s2.foo
  78 #  .sbss2       .gnu.linkonce.sb2.foo
  79 #  .debug_info  .gnu.linkonce.wi.foo
  80 #  .tdata       .gnu.linkonce.td.foo
  81 #  .tbss        .gnu.linkonce.tb.foo
  82 #
  83 #  Each of these can also have corresponding .rel.* and .rela.* sections.
  84
  85 test -z "$ENTRY" && ENTRY=_start
  86 test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
  87 test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
  88 if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
  89 test -z "${ELFSIZE}" && ELFSIZE=32
  90 test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
  91 test "$LD_FLAG" = "N" && DATA_ADDR=.
  92 test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
  93 test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
  94 test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
  95 DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
  96 DATA_SEGMENT_RELRO_END=""
  97 DATA_SEGMENT_RELRO_GOTPLT_END=""
  98 DATA_SEGMENT_END=""
  99 if test -n "${COMMONPAGESIZE}"; then
 100   DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
 101   DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
 102   if test -n "${SEPARATE_GOTPLT}"; then
 103     DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT}, .);"
 104   else
 105     DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (0, .);"
 106   fi
 107 fi
 108 INTERP=".interp       ${RELOCATING-0} : { *(.interp) }"
 109 PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
 110 if test -z "$GOT"; then
 111   if test -z "$SEPARATE_GOTPLT"; then
 112     GOT=".got          ${RELOCATING-0} : {${RELOCATING+ *(.got.plt)} *(.got) }"
 113   else
 114     GOT=".got          ${RELOCATING-0} : { *(.got) }"
 115     GOTPLT="${RELOCATING+${DATA_SEGMENT_RELRO_GOTPLT_END}}
 116   .got.plt      ${RELOCATING-0} : { *(.got.plt) }"
 117   fi
 118 fi
 119 DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
 120 RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
 121 DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro .data.rel.ro.*) }"
 122 DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink)  *(.gnu.lto_*) }"
 123 if test -z "${NO_SMALL_DATA}"; then
 124   SBSS=".sbss         ${RELOCATING-0} :
 125   {
 126     ${RELOCATING+PROVIDE (__sbss_start = .);}
 127     ${RELOCATING+PROVIDE (___sbss_start = .);}
 128     ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
 129     ${RELOCATING+*(.dynsbss)}
 130     *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
 131     ${RELOCATING+*(.scommon)}
 132     ${RELOCATING+PROVIDE (__sbss_end = .);}
 133     ${RELOCATING+PROVIDE (___sbss_end = .);}
 134   }"
 135   SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
 136   SDATA="/* We want the small data sections together, so single-instruction offsets
 137      can access them all, and initialized data all before uninitialized, so
 138      we can shorten the on-disk segment size.  */
 139   .sdata        ${RELOCATING-0} :
 140   {
 141     ${RELOCATING+${SDATA_START_SYMBOLS}}
 142     ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
 143     *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
 144   }"
 145   SDATA2=".sdata2       ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
 146   REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
 147   .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
 148   REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
 149   .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
 150   REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
 151   .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
 152   REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
 153   .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
 154 else
 155   NO_SMALL_DATA=" "
 156 fi
 157 test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
 158 CTOR=".ctors        ${CONSTRUCTING-0} :
 159   {
 160     ${CONSTRUCTING+${CTOR_START}}
 161     /* gcc uses crtbegin.o to find the start of
 162        the constructors, so we make sure it is
 163        first.  Because this is a wildcard, it
 164        doesn't matter if the user does not
 165        actually link against crtbegin.o; the
 166        linker won't look for a file to match a
 167        wildcard.  The wildcard also means that it
 168        doesn't matter which directory crtbegin.o
 169        is in.  */
 170
 171     KEEP (*crtbegin*.o(.ctors))
 172
 173     /* We don't want to include the .ctor section from
 174        from the crtend.o file until after the sorted ctors.
 175        The .ctor section from the crtend file contains the
 176        end of ctors marker and it must be last */
 177
 178     KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
 179     KEEP (*(SORT(.ctors.*)))
 180     KEEP (*(.ctors))
 181     ${CONSTRUCTING+${CTOR_END}}
 182   }"
 183 DTOR=".dtors        ${CONSTRUCTING-0} :
 184   {
 185     ${CONSTRUCTING+${DTOR_START}}
 186     KEEP (*crtbegin*.o(.dtors))
 187     KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
 188     KEEP (*(SORT(.dtors.*)))
 189     KEEP (*(.dtors))
 190     ${CONSTRUCTING+${DTOR_END}}
 191   }"
 192 STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
 193   {
 194     ${RELOCATING+_stack = .;}
 195     *(.stack)
 196   }"
 197
 198 # If this is for an embedded system, don't add SIZEOF_HEADERS.
 199 if [ -z "$EMBEDDED" ]; then
 200    test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
 201 else
 202    test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
 203 fi
 204
 205 cat <<EOF
 206 /* Copyright (C) 2014-2021 Free Software Foundation, Inc.
 207
 208    Copying and distribution of this script, with or without modification,
 209    are permitted in any medium without royalty provided the copyright
 210    notice and this notice are preserved.  */
 211
 212 OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
 213               "${LITTLE_OUTPUT_FORMAT}")
 214 OUTPUT_ARCH(${OUTPUT_ARCH})
 215 ${RELOCATING+ENTRY(${ENTRY})}
 216
 217 ${RELOCATING+${LIB_SEARCH_DIRS}}
 218 ${RELOCATING+/* Do we need any of these for elf?
 219    __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
 220 ${RELOCATING+${EXECUTABLE_SYMBOLS}}
 221 ${RELOCATING+${INPUT_FILES}}
 222 ${RELOCATING- /* For some reason, the Solaris linker makes bad executables
 223   if gld -r is used and the intermediate file has sections starting
 224   at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
 225   bug.  But for now assigning the zero vmas works.  */}
 226
 227 SECTIONS
 228 {
 229   /* Read-only sections, merged into text segment: */
 230   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
 231   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
 232   ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
 233   ${CREATE_SHLIB-${INTERP}}
 234   ${INITIAL_READONLY_SECTIONS}
 235   ${TEXT_DYNAMIC+${DYNAMIC}}
 236   .hash         ${RELOCATING-0} : { *(.hash) }
 237   .dynsym       ${RELOCATING-0} : { *(.dynsym) }
 238   .dynstr       ${RELOCATING-0} : { *(.dynstr) }
 239   .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
 240   .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
 241   .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
 242
 243 EOF
 244 if [ "x$COMBRELOC" = x ]; then
 245   COMBRELOCCAT=cat
 246 else
 247   COMBRELOCCAT="cat > $COMBRELOC"
 248 fi
 249 eval $COMBRELOCCAT <<EOF
 250   .rel.init     ${RELOCATING-0} : { *(.rel.init) }
 251   .rela.init    ${RELOCATING-0} : { *(.rela.init) }
 252   .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
 253   .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
 254   .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
 255   .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
 256   .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
 257   .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
 258   ${OTHER_READONLY_RELOC_SECTIONS}
 259   .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.*}) }
 260   .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.*}) }
 261   .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
 262   .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
 263   .rel.tdata    ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
 264   .rela.tdata   ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
 265   .rel.tbss     ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
 266   .rela.tbss    ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
 267   .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
 268   .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
 269   .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
 270   .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
 271   .rel.got      ${RELOCATING-0} : { *(.rel.got) }
 272   .rela.got     ${RELOCATING-0} : { *(.rela.got) }
 273   ${OTHER_GOT_RELOC_SECTIONS}
 274   ${REL_SDATA}
 275   ${REL_SBSS}
 276   ${REL_SDATA2}
 277   ${REL_SBSS2}
 278   .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
 279   .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
 280 EOF
 281 if [ -n "$COMBRELOC" ]; then
 282 cat <<EOF
 283   .rel.dyn      ${RELOCATING-0} :
 284     {
 285 EOF
 286 sed -e '/^[      ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
 287 cat <<EOF
 288     }
 289   .rela.dyn     ${RELOCATING-0} :
 290     {
 291 EOF
 292 sed -e '/^[      ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
 293 cat <<EOF
 294     }
 295 EOF
 296 fi
 297 cat <<EOF
 298   .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
 299   .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
 300   ${OTHER_PLT_RELOC_SECTIONS}
 301
 302   .init         ${RELOCATING-0} :
 303   {
 304     ${RELOCATING+${INIT_START}}
 305     KEEP (*(SORT_NONE(.init)))
 306     ${RELOCATING+${INIT_END}}
 307   } =${NOP-0}
 308
 309   ${DATA_PLT-${BSS_PLT-${PLT}}}
 310   .text         ${RELOCATING-0} :
 311   {
 312     ${RELOCATING+${TEXT_START_SYMBOLS}}
 313     *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
 314     /* .gnu.warning sections are handled specially by elf.em.  */
 315     *(.gnu.warning)
 316     ${RELOCATING+${OTHER_TEXT_SECTIONS}}
 317   } =${NOP-0}
 318   .fini         ${RELOCATING-0} :
 319   {
 320     ${RELOCATING+${FINI_START}}
 321     KEEP (*(SORT_NONE(.fini)))
 322     ${RELOCATING+${FINI_END}}
 323   } =${NOP-0}
 324   ${RELOCATING+PROVIDE (__etext = .);}
 325   ${RELOCATING+PROVIDE (_etext = .);}
 326   ${RELOCATING+PROVIDE (etext = .);}
 327   ${WRITABLE_RODATA-${RODATA}}
 328   .rodata1      ${RELOCATING-0} : { *(.rodata1) }
 329   ${CREATE_SHLIB-${SDATA2}}
 330   ${CREATE_SHLIB-${SBSS2}}
 331   ${OTHER_READONLY_SECTIONS}
 332   .eh_frame_hdr ${RELOCATING-0} : { *(.eh_frame_hdr) }
 333   .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
 334   .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table${RELOCATING+ .gcc_except_table.*})) }
 335
 336   /* Adjust the address for the data segment.  We want to adjust up to
 337      the same address within the page on the next page up.  */
 338   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
 339   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
 340   ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
 341
 342   /* Exception handling  */
 343   .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
 344   .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table${RELOCATING+ .gcc_except_table.*})) }
 345
 346   /* Thread Local Storage sections  */
 347   .tdata        ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
 348   .tbss         ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
 349
 350   .preinit_array   ${RELOCATING-0} : { KEEP (*(.preinit_array)) }
 351   .init_array   ${RELOCATING-0} : { KEEP (*(.init_array)) }
 352   .fini_array   ${RELOCATING-0} : { KEEP (*(.fini_array)) }
 353
 354   ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
 355   ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
 356   .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
 357
 358   ${RELOCATING+${DATARELRO}}
 359   ${OTHER_RELRO_SECTIONS}
 360   ${TEXT_DYNAMIC-${DYNAMIC}}
 361   ${NO_SMALL_DATA+${RELRO_NOW+${GOT}}}
 362   ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
 363   ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOTPLT}}}}
 364   ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
 365   ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
 366
 367   ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
 368
 369   .data         ${RELOCATING-0} :
 370   {
 371     ${RELOCATING+${DATA_START_SYMBOLS}}
 372     *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
 373     ${CONSTRUCTING+SORT(CONSTRUCTORS)}
 374   }
 375   .data1        ${RELOCATING-0} : { *(.data1) }
 376   ${WRITABLE_RODATA+${RODATA}}
 377   ${OTHER_READWRITE_SECTIONS}
 378   ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
 379   ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
 380   ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
 381   ${RELOCATING+${OTHER_GOT_SYMBOLS}}
 382   ${NO_SMALL_DATA-${GOT}}
 383   ${OTHER_GOT_SECTIONS}
 384   ${SDATA}
 385   ${OTHER_SDATA_SECTIONS}
 386   ${RELOCATING+_edata = .;}
 387   ${RELOCATING+PROVIDE (edata = .);}
 388   ${RELOCATING+__bss_start = .;}
 389   ${RELOCATING+${OTHER_BSS_SYMBOLS}}
 390   ${SBSS}
 391   ${BSS_PLT+${PLT}}
 392   .bss          ${RELOCATING-0} :
 393   {
 394    ${RELOCATING+*(.dynbss)}
 395    *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
 396    ${RELOCATING+*(COMMON)
 397    /* Align here to ensure that the .bss section occupies space up to
 398       _end.  Align after .bss to ensure correct alignment even if the
 399       .bss section disappears because there are no input sections.  */
 400    . = ALIGN(${ALIGNMENT});}
 401   }
 402   ${OTHER_BSS_SECTIONS}
 403   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
 404   ${RELOCATING+_end = .;}
 405   ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
 406   ${RELOCATING+PROVIDE (end = .);}
 407   ${RELOCATING+${DATA_SEGMENT_END}}
 408
 409   /* Stabs debugging sections.  */
 410   .stab          0 : { *(.stab) }
 411   .stabstr       0 : { *(.stabstr) }
 412   .stab.excl     0 : { *(.stab.excl) }
 413   .stab.exclstr  0 : { *(.stab.exclstr) }
 414   .stab.index    0 : { *(.stab.index) }
 415   .stab.indexstr 0 : { *(.stab.indexstr) }
 416
 417   .comment       0 : { *(.comment) }
 418
 419 EOF
 420
 421 . $srcdir/scripttempl/DWARF.sc
 422
 423 cat <<EOF
 424   ${STACK_ADDR+${STACK}}
 425   ${OTHER_SECTIONS}
 426   ${RELOCATING+${OTHER_END_SYMBOLS}}
 427   ${RELOCATING+${DISCARDED}}
 428 }
 429 EOF