sim/ChangeLog

   1 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
   2
   3         Update year range in copyright notice of all files.
   4
   5 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
   6
   7         Update old contact info in GPL license notices.
   8
   9 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
  10
  11         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
  12
  13 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
  14
  15         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
  16         condition.
  17         * common/acinclude.m4: Define lt_cv_dlopen_libs.
  18         * arm/configure: Regenerate.
  19         * avr/configure: Regenerate.
  20         * bfin/configure: Regenerate.
  21         * common/configure: Regenerate.
  22         * cr16/configure: Regenerate.
  23         * cris/configure: Regenerate.
  24         * d10v/configure: Regenerate.
  25         * erc32/configure: Regenerate.
  26         * frv/configure: Regenerate.
  27         * h8300/configure: Regenerate.
  28         * igen/configure: Regenerate.
  29         * iq2000/configure: Regenerate.
  30         * lm32/configure: Regenerate.
  31         * m32c/configure: Regenerate.
  32         * m32r/configure: Regenerate.
  33         * m68hc11/configure: Regenerate.
  34         * mcore/configure: Regenerate.
  35         * microblaze/configure: Regenerate.
  36         * mips/configure: Regenerate.
  37         * mn10300/configure: Regenerate.
  38         * moxie/configure: Regenerate.
  39         * ppc/configure: Regenerate.
  40         * rl78/configure: Regenerate.
  41         * rx/configure: Regenerate.
  42         * sh/configure: Regenerate.
  43         * sh64/configure: Regenerate.
  44         * testsuite/configure: Regenerate.
  45         * v850/configure: Regenerate.
  46
  47 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
  48
  49         * MAINTAINERS: Update my email address.
  50
  51 2012-09-24  Steve Ellcey  <sellcey@mips.com>
  52
  53         * mips/basic.exp: Add mips*-mti-elf* target.
  54         * configure.ac: Add mips*-mti-elf* target.
  55         * configure: Regenerate.
  56
  57 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
  58
  59         * configure: Regenerate.
  60
  61 2012-06-06  Michael Eager  <eager@eagercon.com>
  62
  63         * microblaze/interp.c (config.h): Add #include.
  64
  65 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
  66
  67         * MAINTAINERS (Global Maintainers): New section.  Add Mike
  68         Frysinger.
  69
  70 2011-11-28  DJ Delorie  <dj@redhat.com>
  71
  72         * configure.tgt: Add rl78 support.
  73         * configure: Regenerate.
  74         * rl78: New directory.
  75         * MAINTAINERS: Add myself as RL78 maintainer.
  76
  77 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
  78
  79         * MAINTAINERS: Remove Thiemo Seufer.
  80
  81 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  82
  83         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
  84         * configure: Regenerate.
  85
  86 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
  87
  88         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
  89         handle targets.
  90         * configure: Regenerate.
  91
  92 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
  93
  94         * MAINTAINERS: Add bfin entry.
  95         * configure.tgt (bfin-*-*): Handle bfin targets.
  96         * configure: Regenerate.
  97
  98 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
  99
 100         * .gitignore: Add /*/hw-config.h.
 101
 102 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 103
 104         * .gitignore: New file.
 105
 106 2010-07-28  DJ Delorie  <dj@redhat.com>
 107
 108         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 109
 110 2010-06-08  Nick Clifton  <nickc@redhat.com>
 111
 112         * reg.c (set_oszc): Use unsigned int for the mask.
 113         (set_szc, set_osz, set_sz): Likewise.
 114
 115 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 116
 117         * configure.ac: Target logic moved out to and included from ...
 118         * configure.tgt: ... this new file.
 119         * configure: Regenerated.
 120
 121 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 122
 123         * README-HACKING: Add more sections.
 124
 125 2010-02-11  Doug Evans  <dje@sebabeach.org>
 126
 127         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 128         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 129         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 130         * cris/semcrisv32f-switch.c: Regenerate.
 131
 132 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 133
 134         * avr/configure: Regenerate.
 135         * cris/configure: Regenerate.
 136         * microblaze/configure: Regenerate.
 137
 138 2010-01-02  Doug Evans  <dje@sebabeach.org>
 139
 140         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 141         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 142         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 143         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 144         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 145         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 146
 147 2010-01-01  Doug Evans  <dje@sebabeach.org>
 148
 149         * cris/mloop.in: Fix copyright year update snafu.
 150
 151 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 152
 153         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 154         * common/common.m4: Use AM_ZLIB to check for zlib support.
 155         * ppc/configure.ac: Likewise.
 156         * arm/configure, avr/configure, common/configure, cr16/configure,
 157         cris/configure, d10v/configure, erc32/configure, frv/configure,
 158         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 159         m32r/configure, m68hc11/configure, mcore/configure,
 160         microblaze/configure, mips/configure, mn10300/configure,
 161         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 162         v850/configure: Regenerate.
 163
 164 2009-11-24  DJ Delorie  <dj@redhat.com>
 165
 166         * rx: New directory.
 167         * configure.ac: Add entry for Renesas RX.
 168         * configure: Regenerate.
 169
 170 2009-11-22  Doug Evans  <dje@sebabeach.org>
 171
 172         * cris/cpuall.h: Regenerate.
 173         * cris/cpuv10.h: Regenerate.
 174         * cris/cpuv32.h: Regenerate.
 175         * cris/decodev10.c: Regenerate.
 176         * cris/decodev10.h: Regenerate.
 177         * cris/decodev32.c: Regenerate.
 178         * cris/decodev32.h: Regenerate.
 179
 180 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 181
 182         * avr/interp.c (sim_write): Allow byte access.
 183         (sim_read): Ditto.
 184
 185 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 186
 187         * avr/interp.c (sim_load): Clear memory before loading.
 188
 189 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 190
 191         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 192
 193 2009-10-23  Doug Evans  <dje@sebabeach.org>
 194
 195         * cris/arch.c: Regenerate.
 196         * cris/arch.h: Regenerate.
 197         * cris/cpuall.h: Regenerate.
 198         * cris/cpuv10.c: Regenerate.
 199         * cris/cpuv10.h: Regenerate.
 200         * cris/cpuv32.c: Regenerate.
 201         * cris/cpuv32.h: Regenerate.
 202         * cris/cris-desc.c: Regenerate.
 203         * cris/cris-desc.h: Regenerate.
 204         * cris/cris-opc.h: Regenerate.
 205         * cris/decodev10.c: Regenerate.
 206         * cris/decodev10.h: Regenerate.
 207         * cris/decodev32.c: Regenerate.
 208         * cris/decodev32.h: Regenerate.
 209         * cris/modelv10.c: Regenerate.
 210         * cris/modelv32.c: Regenerate.
 211         * cris/semcrisv10f-switch.c: Regenerate.
 212         * cris/semcrisv32f-switch.c: Regenerate.
 213
 214 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 215
 216         * avr/interp.c (sim_stop): Return 1.
 217
 218 2009-10-16  Doug Evans  <dje@sebabeach.org>
 219
 220         * MAINTAINERS: Add myself as m32r maintainer.
 221
 222 2009-10-15  Michael Egaer  <eager@eagercon.com>
 223
 224         * MAINTAINERS: Add self as MicroBlaze maintainer.
 225
 226 2009-10-14  Ben Elliston  <bje@gnu.org>
 227
 228         * MAINTAINERS (common): Move myself to "past maintainers" section.
 229
 230 2009-10-06  Michael Eager  <eager@eagercon.com>
 231
 232         * microblaze/interp.c: Add include microblaze-dis.h.
 233
 234 2009-09-23  Michael Eager  <eager@eagercon.com>
 235
 236         * configure: Add microblaze-*.* (not regenerated).
 237         * configure.ac: Likewise.
 238         * microblaze/config.in: New.
 239         * microblaze/configure: Generate.
 240         * microblaze/configure.ac: New.
 241         * microblaze/interp.c: New.
 242         * microblaze/Makefile.in: New.
 243         * microblaze/microblaze.h: New.
 244         * microblaze/microblaze.isa: New.
 245         * microblaze/sim-main.h: New.
 246         * microblaze/sysdep.h: New.
 247
 248 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 249
 250         * avr/config.in: Regenerate.
 251         * avr/configure: Likewise.
 252         * configure: Likewise.
 253         * cris/config.in: Likewise.
 254         * cris/configure: Likewise.
 255
 256         * configure.ac: m4_include toplevel config/override.m4.
 257         * configure: Regenerate.
 258         * avr/configure: Regenerate.
 259         * cris/configure: Regenerate.
 260
 261 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 262
 263         * Makefile.in (datarootdir): New variable.
 264
 265 2009-05-18  Jon Beniston <jon@beniston.com>
 266
 267         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 268         * configure.ac: Add lm32 target.
 269         * lm32: New directory.
 270
 271 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 272
 273         * MAINTAINERS: Orphan ppc.
 274
 275 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 276
 277         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 278         m32c_signal_to_target.  Change signal return values from SIGILL,
 279         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 280         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 281
 282 2009-04-30  Anthony Green  <green@moxielogic.com>
 283
 284         * MAINTAINERS: Add myself for the moxie port.
 285         * moxie: New directory.
 286         * configure.ac: Add entry for moxie.
 287         * configure: Regenerate.
 288
 289 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 290
 291         * avr: New directory.
 292         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 293         * avr/config.in: New file, generated by autoheader.
 294         * avr/configure: New file generated by autoconf.
 295         * configure.ac: Add avr.
 296         * configure: Regenerated.
 297
 298 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 299
 300         * Makefile.in: Add dummy install-pdf, html, and
 301         install-html targets.
 302
 303 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 304
 305         * cris/sim-if.c: Include errno.h.
 306         (cris_start_address, cris_program_offset): New variables.
 307         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 308         enums.
 309         (cris_options): New options --cris-program-offset and
 310         --cris-start-address.
 311         (cris_option_handler): Handle new options.
 312         (cris_program_offset_write, cris_set_section_offset_iterator)
 313         (cris_offset_sections, cris_offset_sections): New functions.
 314         (sim_load): Use cris_program_offset_write as function argument to
 315         cris_load_elf_file, not sim_write.
 316         (struct offsetinfo): New struct.
 317         (cris_handle_interpreter): Fix typo in comment.
 318         (sim_open): Call cris_offset_sections as soon as the bfd of the
 319         infile is available.  Gate bfd validity checks on abfd non-NULL.
 320         (sim_create_inferior): Let cris_start_address when != -1 override
 321         other start-address choices.
 322
 323 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 324
 325         * cris/traps.c (abort): Define to call sim_io_error.
 326         (create_map): Make -1 imply a non-fixed address, not 0.  All
 327         callers changed.  Only prefer the next higher unmapped address if
 328         the last mapped address is no less than 0x40000000.  Check that
 329         the address to be mapped is not already mapped.  Update head
 330         comment.
 331         (unmap_pages): Don't call abort when recursive call fails, just
 332         note and return an error if a page in the range couldn't be unmapped.
 333         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 334         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 335         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 336         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 337         don't abort on page not being mapped.  Handle non-anon filemap
 338         with length padded to pagesize.
 339
 340 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 341
 342         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 343         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 344         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 345         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 346         (TARGET_AT_CLKTCK): Remove redundant macros.
 347         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 348         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 349         callers.
 350         (sim_open): Also pass AT_SECURE.
 351
 352         * cris/sim-main.h (struct _sim_cpu): New member
 353         set_target_thread_data.
 354         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 355         * cris/crisv10f.c: Ditto.
 356         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 357         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 358         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 359         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 360         case.
 361
 362         * cris/traps.c (TARGET_SYS_exit_group): Define.
 363         (cris_break_13_handler): Handle it like the exit for the last
 364         thread.
 365
 366         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 367         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 368         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 369         2.6.27.  Set machine field to the BFD printable name of the
 370         machine.
 371
 372         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 373         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 374         TARGET_MAP_DENYWRITE.
 375
 376         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 377         (TARGET_X_OK, TARGET_F_OK): Define.
 378         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 379
 380         * cris/semcrisv32f-switch.c: Regenerate.
 381
 382 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 383
 384         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 385         just a short CRIS-specific notice.  Tweak the wording for a
 386         failing architecture test.
 387
 388         * cris/traps.c (TARGET_SYS_writev): New macro.
 389         (is_mapped_only, cris_dump_map): New functions.
 390         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 391         and prot combinations and a non-zero page-offset.  If
 392         TARGET_MAP_FIXED, unmap pages before mapping them.
 393         <case TARGET_SYS_mprotect>: When checking, allow any length
 394         argument.  Don't actually do anything.
 395         <case TARGET_SYS_writev>: New case.
 396
 397         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 398         * cris/sim-if.c: Include elf-bfd.h.
 399         (struct progbounds): New members end_loadmem, start_nonloadmem.
 400         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 401         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 402         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 403         static.  Update head comment.  Set new struct progbounds members.
 404         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 405         variables.
 406         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 407         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 408         functions.
 409         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 410         handling to use auxv_entries.  Improve error message and checking
 411         for invalid programs.  Use new variable abfd for the program
 412         instead of for each access reaching into sd to get it.
 413         (sim_create_inferior): If non-zero, use interp_start_addr instead
 414         of the program start address.
 415         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 416         stale comment.  Always specify little-endian.
 417
 418 2008-07-29  Nick Clifton  <nickc@redhat.com>
 419
 420         * common/genmloop.sh: Add new parameter: -shell to specify the
 421         command interpreter to use to run the input file.  This is
 422         necessary because otherwise SHELL is taken from the user's
 423         environment, and not from the makefile that invoked this script
 424         and the user might not be running an sh-like shell.
 425         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 426         * fr30/Makefile.in: Likewise.
 427         * frv/Makefile.in: Likewise.
 428         * i960/Makefile.in: Likewise.
 429         * iq2000/Makefile.in: Likewise.
 430         * m32r/Makefile.in: Likewise.
 431
 432         * frv/mloop.in: Add missing start of line comment marker.
 433
 434 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 435
 436         * cris/configure: Regenerate to track ../common/common.m4 changes.
 437         * cris/config.in: Ditto.
 438
 439 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 440             Daniel Jacobowitz  <dan@codesourcery.com>
 441             Joseph Myers  <joseph@codesourcery.com>
 442
 443         * cris/configure: Regenerate.
 444
 445 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 446
 447         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 448
 449 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 450
 451         * MAINTAINERS: Add myself as maintainer of cr16 port.
 452
 453 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 454
 455         Add simulator for National cr16 processor.
 456         * cr16: New directory.
 457         * configure.ac: Add entry for National cr16.
 458         * configure: Regenerate.
 459
 460 2008-02-05  DJ Delorie  <dj@redhat.com>
 461
 462         * configure.ac (v850): V850 now has a testsuite.
 463         * configure (v850): Likewise.
 464
 465 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 466
 467         Updated copyright notices for most files.
 468
 469 2007-12-19  DJ Delorie  <dj@redhat.com>
 470
 471         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 472         cut_point.
 473
 474 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 475
 476         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 477         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 478         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 479         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 480         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 481         cris/semcrisv32f-switch.c: Regenerate.
 482
 483 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 484
 485         Switch the license of all files explicitly copyright the FSF
 486         to GPLv3.
 487
 488 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 489
 490         * Makefile.in: Add dummy "pdf" target.
 491
 492 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 493
 494         * cris/traps.c (dump_statistics): Change format for cycle numbers
 495         to %llu and cast parameters to unsigned long long.
 496
 497 2007-02-16  Thiemo Seufer  <ths@mips.com>
 498
 499         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 500
 501 2007-01-28  Manuel Lauss  <slauss@resi.at>
 502
 503         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 504         (sh-*-*): Change to sh*-*-*.
 505         * configure: Regenerated.
 506
 507 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 508
 509         Updated copyright notices for most files.
 510
 511 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 512
 513         * Makefile.in (autoconf-common autoheader-common): Only run
 514         autoheader on subdirs with a file config.in.
 515
 516         * configure.ac (common): Make the default "yes" for all targets
 517         with sim subdirs.
 518         * configure: Regenerate.
 519
 520         * Makefile.in (autoconf-common autoheader-common): In documented
 521         usage, say SHELL=/bin/sh.
 522         (.PHONY): Add autoheader-common.
 523
 524         * MAINTAINERS: Add self as authorized committer for *.
 525
 526 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 527             Hans-Peter Nilsson  <hp@axis.com>
 528
 529         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 530         (cris_unknown_syscall_action): Declare.
 531         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 532         (cris_options): Add cris-unknown-syscall option.
 533         (cris_option_handler): Correct comment about and error message for
 534         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 535         * cris/traps.c: Include stdarg.h
 536         (cris_unknown_syscall): New function.
 537         (cris_break_13_handler): Instead of sim_io_eprintf and
 538         sim_engine_halt, call cris_unknown_syscall to handle more or less
 539         unknown syscalls.  Adjust code as necessary to handle return
 540         value.
 541
 542 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 543
 544         * MAINTAINERS: Add Dave Brolley for sh64.
 545
 546 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 547
 548         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 549         (cris_pipe_empty): Correct initialization of "remaining".  Only
 550         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 551         are written.
 552
 553 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 554
 555         * cris/configure.ac: Check for limits.h and sys/param.h.
 556         * cris/configure, cris/config.in: Rebuild.
 557         * cris/traps.c (SIM_PATHMAX): New macro.
 558         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 559
 560 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 561
 562         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 563         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 564         * configure: Regenerated.
 565
 566 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 567
 568         * cris/configure: Regenerated.
 569
 570 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 571
 572         * cris/configure: Regenerated.
 573
 574 2006-05-05  Andreas Schwab  <schwab@suse.de>
 575
 576         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 577         * configure: Regenerate.
 578
 579         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 580         (CC_FOR_BUILD): Don't override.
 581         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 582
 583 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 584
 585         * MAINTAINERS: Add an "Authorized committers" section, and list
 586         DJ Delorie for v850.
 587
 588 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 589
 590         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 591
 592 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 593
 594         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 595         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 596         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 597         (all): Depend on rvdummy$(EXEEXT).
 598         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 599         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 600         default off.
 601         * cris/configure: Regenerate.
 602         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 603         (enum cris_interrupt_type, crisv10deliver_interrupt)
 604         (crisv32deliver_interrupt: New declarations.
 605         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 606         sim_events_tickn and set state-events member work_pending when it's
 607         time for the next event.
 608         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 609         interrupt-delivery function.
 610         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 611         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 612         * cris/devices.c: Include hw-device.h.
 613         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 614         (device_io_write_buffer): Only perform 0x900000xx-functions if
 615         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 616         call hw_io_write_buffer.  Add return 0 last in function.
 617         * cris/sim-if.c (cris_have_900000xxif): Now global.
 618         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 619         Force "-model" option, effectively.
 620         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 621         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 622
 623 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 624
 625         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 626         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 627         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 628
 629 2006-03-13  DJ Delorie  <dj@redhat.com>
 630
 631         * MAINTAINERS: Add self as m32c sim maintainer.
 632
 633 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 634
 635         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 636         mapping.
 637         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 638
 639 2006-01-23  Jim Blandy  <jimb@redhat.com>
 640
 641         Add simulator for Renesas M32C and M16C.
 642
 643         * m32c: New directory.
 644         * configure.ac: Add entry for Renesas M32C.
 645         * configure: Regenerate.
 646
 647 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 648
 649         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 650         cycle count for the current insn.
 651
 652 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 653
 654         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 655         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 656         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 657         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 658
 659 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 660
 661         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 662         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 663         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 664         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 665         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 666         cris/semcrisv32f-switch.c: Regenerate.
 667
 668 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 669
 670         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 671         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 672         TARGET_O_WRONLY.
 673         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 674         F_GETFL on fd 0, 1 and 2.
 675
 676 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 677
 678         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 679         last_open_fd, last_open_flags.
 680         * cris/traps.c: Don't include targ-vals.h.
 681         (TARGET_O_ACCMODE): Define.
 682         (cris_break_13_handler): Set new _sim_cpu members.
 683         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 684         Rearrange code as switch.  Emit "unimplemented" abort for
 685         unimplemented fcntl calls.
 686
 687         * cris/traps.c (TARGET_SYS_stat): Define.
 688         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 689         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 690
 691 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 692
 693         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 694         low 32 bits are used after an unsigned long cast.
 695
 696 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 697
 698         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 699
 700 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 701
 702         * MAINTAINERS: Update my mail address, move myself to the
 703         "Past maintainers" section.
 704
 705 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 706
 707         * configure.ac: Add igen to v850 build.
 708         * configure: Regenerate.
 709
 710 2005-04-29  Paul Brook  <paul@codesourcery.com>
 711
 712         * common/callback.c (PIPE_BUF): Provide default definition.
 713         (os_lstat): Use stat if lstat is not available on the host.
 714         (os_ftruncate): Return EINVAL if not available on the host.
 715         (os_truncate): Ditto.
 716         * common/configure.ac: Check for lstat, truncate and ftruncate.
 717         * common/configure: Regenerate.
 718         * common/config.in: Regenerate.
 719
 720 2005-04-27  Paul Brook  <paul@codesourcery.com>
 721
 722         * common/Make-common.in: Add $(EXEEXT) to "run".
 723
 724 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 725
 726         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 727         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 728         implemented.  In call to create_map, pad length argument to 8k.
 729
 730 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 731
 732         * configure.ac: Add explicit sh64 case.
 733         * configure: Regenerate.
 734
 735 2005-03-30  Paul Brook  <paul@codesourcery.com>
 736
 737         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 738
 739 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 740
 741         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 742         include cgen-ops.h in decodev10.c and decodev32.c.
 743         * cris/sim-main.h: Don't include cgen-ops.h here.
 744         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 745         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 746         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 747         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 748         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 749         cris/semcrisv32f-switch.c: Regenerate.
 750
 751         * cris/traps.c (cris_break_13_handler) <case
 752         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 753         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 754
 755 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 756
 757         * cris/configure: Regenerate.
 758
 759 2005-02-28  Jim Blandy  <jimb@redhat.com>
 760
 761         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 762         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 763         Regenerated, after change to common/aclocal.m4.
 764
 765 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 766
 767         * iq2000: New target subdirectory.
 768         * configure.ac: Add iq2000 target.
 769         * configure: Regenerate.
 770
 771 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 772
 773         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 774         (realclean, install): Fail if subdir make failed.
 775
 776 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 777
 778         * cris: New directory, simulator for Axis Communications CRIS
 779         including CRIS v32, CGEN-based.
 780         * configure.ac: Add corresponding configury.
 781         * configure: Regenerate.
 782
 783 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 784
 785         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 786         common directory.  Remove sparc*-*-* from list.
 787
 788 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 789
 790         * Makefile.in (autoconf-common autoheader-common): Add --force to
 791         autoconf and autoheader.
 792         (autoconf-common autoheader-common)
 793         (autoconf-install autoheader-install): Check for configure.ac, not
 794         configure.in.
 795         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 796         * configure: Re-generate.
 797
 798 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 799
 800         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 801         correctly calls AC_CONFIG_SUBDIRS.
 802         * configure: Re-generate.
 803
 804 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 805
 806         * i960, h8500: Delete directory.
 807
 808 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 809
 810         * d30v, fr30, mn10200, z8k: Delete directory.
 811
 812 2004-03-10  Ben Elliston  <bje@gnu.org>
 813
 814         * MAINTAINERS: Update my mail address.
 815
 816 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 817
 818         * configure.in (mips*-*-*): Configure in testsuite.
 819         * configure: Regenerate.
 820
 821 2003-10-08  Dave Brolley  <brolley@redhat.com>
 822
 823         * configure.in: Move frv handling to alphabetically correct placement.
 824
 825 2003-09-03  Andreas Schwab  <schwab@suse.de>
 826
 827         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 828
 829 2003-08-29  Dave Brolley  <brolley@redhat.com>
 830
 831         * MAINTAINERS: Add myself as maintainer of the FRV port.
 832
 833 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 834             Dave Brolley  <brolley@redhat.com>
 835
 836         * frv/: New directory, simulator for the Fujitsu FRV.
 837         * configure.in: Add frv configury.
 838         * configure: Regenerate.
 839
 840 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 841
 842         * MAINTAINERS: Update my mail address.
 843
 844 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 845
 846         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 847         maintenance.  List igen and sh maintainers.  Mention that target
 848         and global maintainers pick up the slack.
 849
 850 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 851
 852         * configure.in: Add testsuite to extra_subdirs for sh.
 853         * configure: Regenerate.
 854
 855 2003-01-23  Nick Clifton  <nickc@redhat.com>
 856
 857         * Add sh2e support:
 858
 859 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 860
 861         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 862
 863 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 864
 865         * MAINTAINERS: Update my email address.
 866
 867 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 868
 869         * w65/: Delete directory.
 870
 871 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 872
 873         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 874         * configure: Re-generate.
 875
 876 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 877
 878         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 879         * configure: Re-generate.
 880
 881 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 882
 883         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 884         id, date and host to be overriden by NAME, ID, DATE and HOST
 885         respectfully.  Use ISO dates.
 886
 887 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 888
 889         * Makefile.in (ChangeLog): New makefile variable.
 890         * README-HACKING: Mention the ChangeLog makefile variable.
 891
 892 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 893
 894         * tic80/: Delete directory.
 895
 896 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 897
 898         * MAINTAINERS: Update my email address.
 899
 900 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 901
 902         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 903
 904 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 905
 906         * MAINTAINERS: Record self as a co-maintainer of just common/.
 907
 908 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 909
 910         * MAINTAINERS: Point to GDB files describing overall maintaince
 911         and check-in procedures.
 912
 913 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 914
 915         * MAINTAINERS: Add myself for ARM portions.
 916
 917 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 918
 919         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 920         * configure: Re-generate.
 921
 922 2001-02-16  Ben Elliston  <bje@redhat.com>
 923
 924         * MAINTAINERS: Add myself for common portions.
 925
 926 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 927
 928         * MAINTAINERS: Added self and Andrew for the mips sim.
 929
 930 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 931
 932         * MAINTAINERS: Added self and Andrew for the ppc sim.
 933
 934 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 935
 936         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 937         * m68hc11: New directory.
 938         * configure.in: Add.
 939         * configure: Regenerate.
 940
 941 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 942
 943         * tic80: New directory.
 944         * configure.in: Add configury.
 945         * configure: Regenerate.
 946
 947 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 948
 949         * configure.in (extra_subdirs): Add testsuite to strongarm
 950         directories.
 951         * configure: Regenerate.
 952
 953 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 954
 955         * MAINTAINERS: New file.  Blank.
 956
 957 1999-11-18  Ben Elliston  <bje@cygnus.com>
 958
 959         * configure.in: Require autoconf 2.13 and remove obsolete
 960         invocation of AC_C_CROSS.
 961         * configure: Regenerate.
 962
 963 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 964
 965         * configure.in: Configure the testsuite directory for thumb.
 966         * configure: Regenerate.
 967
 968 1999-07-16  Ben Elliston  <bje@cygnus.com>
 969
 970         * configure.in: Configure the testsuite directory for arm.
 971         * configure: Regenerate.
 972
 973 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 974
 975         * configure.in: Add support for MCore target.
 976         * configure: Regenerate.
 977
 978 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 979
 980         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 981         RUNTEST instead of commenting out, fixes portability problem.
 982
 983 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 984
 985         * configure.in: Add support for StrongARM target.
 986         * configure: Regenerate.
 987
 988 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 989
 990         * configure.in: Require autoconf 2.12.1 or higher.
 991
 992 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 993
 994         * configure.in (i960-*-*): Add.
 995         * configure: Rebuild.
 996
 997 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 998
 999         * configure.in: Added case for fr30-*-*.
1000         * configure: Regenerated.
1001
1002 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1003
1004         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1005         to allow successful operation on Windows.
1006
1007 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1008
1009         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1010         check can be invoked recursively.
1011
1012 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1013
1014         * configure.in: Build simulator on sparclite and sparc86x targets.
1015         * configure: Regenerate.
1016
1017 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1018
1019         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1020         to autoconf and autoheader.
1021
1022 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1023
1024         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1025         ../common' to autoconf and autoheader.  Unconditionally run
1026         autoconf in every subdir.
1027         (autoconf-changelog autoheader-changelog): Unconditionally run
1028         commands in every subdir.
1029         (autoconf-install autoheader-install): Likewise.
1030
1031 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1032
1033         * Makefile.in:  Get SHELL from configure.
1034         * (FLAGS_TO_PASS):  Pass down SHELL.
1035         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1036         NT native builds.
1037
1038 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1039
1040         * configure.in (extra_subdirs): Enable igen for mn10300.
1041         * configure: Re-generate.
1042
1043 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1044
1045         * configure.in (extra_subdirs): Add support for thumb target.
1046
1047         * configure (extra_subdirs): Add support for thumb target.
1048
1049 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1050
1051         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1052         target.
1053         * configure: Regenerate.
1054
1055 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1056
1057         * configure.in (extra_subdirs): v850ea needs igen.
1058         * configure: Re-generate.
1059
1060 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1061
1062         * configure.in (testdir): When a testsuite directory, add that to
1063         the list of confdirs.
1064
1065 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1066
1067         * configure.in (extra_subdirs): Enable igen ready for V850.
1068
1069 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1070
1071         * configure.in (w65-*-*, only_if_enabled): Set.
1072         * configure: Re-generate.
1073
1074 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1075
1076         * configure.in (sparc*-*-*, only_if_enabled): Set
1077         only_if_enabled=yes.  Check only_if_enabled before enabling a
1078         simulator.
1079         * configure: Regenerate.
1080
1081 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1082
1083         * configure.in (extra_subdirs): Add v850e target.
1084
1085 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1086
1087         * configure.in (extra_subdirs): Add v850ea target.
1088
1089 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1090
1091         * configure.in (sparc*-*-*): Don't build erc32.
1092         * configure: Regenerate.
1093
1094 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1095
1096         * configure.in (m32r-*-*): New target.
1097         * configure: Regenerate.
1098
1099         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1100
1101 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1102
1103         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1104         thought that .NOEXPORT was the default target.
1105
1106 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1107
1108         * Makefile.in (clean mostlyclean): Restore targets accidentally
1109         deleted in earlier change.
1110
1111 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1112
1113         * Makefile.in (autoheader-common, autoheader-changelog,
1114         autoheader-install): Perform autoheader in addition to autoconf.
1115
1116 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1117
1118         * Makefile.in (autoconf-install): New target.
1119         (autoconf-changelog): Try different way to obtain user name.
1120
1121 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1122
1123         * Makefile.in (autoconf-changelog): New target, update
1124         ChangeLog for all subdirectories - normally used after
1125         autoconf-common target.
1126
1127 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1128
1129         * configure.in (extra_subdirs): Include testsuite for d30v.
1130         * configure: Regenerate.
1131
1132         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1133         ../gdb/Makefile.in
1134         (check): New rules - drive the testsuite.
1135
1136 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1137
1138         * configure.in: Add mn10200 configure lines accidentally
1139         removed.
1140         * configure: Regenerated.
1141
1142 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1143
1144         * configure.in (extra_subdirs): Generalize common sub directory
1145         into a list.
1146         (extra_subdirs): For d30v add igen to the list to be built.
1147
1148 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1149
1150         * configure.in (d30v): New target.
1151         * configure: Regenerated.
1152
1153 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1154
1155         * configure.in: Don't require GCC to build the mn10200
1156         simulator anymore.
1157         * configure: Rebuilt.
1158
1159 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1160
1161         * configure.in: Don't configure any subdirs if no simulator
1162         is being built.  Don't use erc32 for sparc64.
1163         * configure: Regenerated.
1164
1165 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1166
1167         * Makefile.in (autoconf-common): New target.
1168         * configure.in: Do configure common.
1169         * configure: Regenerated.
1170
1171 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1172
1173         * configure configure.in:  Don't configure common anymore.  Files
1174         from common are now built in the individual simualtor directories.
1175         This fixes problems with the WinGDB build procedure.
1176
1177 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1178
1179         * configure: Enable the mn10200 simulator.
1180
1181 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1182
1183         * configure.in (configdirs): Add common.
1184         * configure: Regenerated.
1185
1186 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1187
1188         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1189         system V based targets.
1190         * configure: Regenerate.
1191
1192 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1193
1194         * configure.in (--enable-sim-powerpc): Delete.
1195         (--enable-sim): Add.
1196         * configure: Regenerated.
1197
1198 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1199
1200         * configure.in: Only build the V850 simulator if
1201         we are using gcc.
1202         * configure: Rebuild.
1203
1204 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1205
1206         * configure.in: Do build erc32 for DOS and Windows hosts.
1207         * configure: Rebuild.
1208
1209 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1210
1211         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1212         be inherited from the parent.  Remove INSTALL_XFORM and
1213         INSTALL_XFORM1.  Make INSTALL be set from configure.
1214
1215 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1216
1217         * configure.in: Only build the MIPS simulator if we are using
1218         gcc.
1219         * configure: Rebuild.
1220
1221 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1222
1223         * configure.in (v850-*-*): Added V850 simulator.
1224
1225 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1226
1227         * configure.in (d10v-*-*): Added D10V simulator.
1228
1229 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1230
1231         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1232         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1233         (docdir): Removed.
1234         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1235         (AC_PROG_INSTALL): Added.
1236         * configure: Rebuilt.
1237
1238 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1239
1240         * configure.in: Only configure erc32 if using gcc.
1241         * configure: Rebuild.
1242
1243 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1244
1245         * configure.in (sim_target): Build PowerPC simulator for powerpc
1246         System V.4, Solaris, and Elf targets.
1247         * configure: Regenerate with autoconf 2.10.
1248
1249 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1250
1251         * configure.in: Only built erc32 simulator on Unix hosts as it
1252         uses pseudo ttys.
1253         * configure: Regenerated with autoconf 2.8.
1254
1255 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1256
1257         * erc32: Sparc simulator from the ESA.
1258
1259 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1260
1261         From: Miles Bader  <miles@gnu.ai.mit.edu>
1262         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1263         * configure: Regenerate using autoconf.
1264
1265 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1266
1267         * Makefile.in (install): Fix typo.
1268
1269 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1270
1271         * configure: Regenerate with autoconf 2.7.
1272
1273         * Makefile.in (all): Simplify.
1274         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1275         as in the all target.
1276         (distclean, maintainer-clean, realclean): Likewise.
1277         (install): Likewise.
1278
1279 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1280
1281         * Makefile.in (all): Remove extra '\' char from shell script.
1282
1283 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1284
1285         * Makefile.in (all): Avoid a for loop with zero elements, even if
1286         the loop will not be executed because of an if statement.
1287
1288 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1289
1290         * Makefile.in (install): Add missing semicolon in "fi \".
1291
1292 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1293
1294         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1295         defaults from configure.
1296
1297         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1298         configure defaults.
1299         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1300         if either --enable-sim-powerpc is used, or the host compiler is
1301         GCC.
1302
1303 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1304
1305         * configure.in (mips*-*-*): Added "mips" simulator target.
1306         * configure: Re-generated.
1307
1308 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1309
1310         * Makefile.in (BISON): Remove macro.
1311         (FLAGS_TO_PASS): Remove BISON.
1312
1313 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1314
1315         * configure.in:  Explicitly `exit 0' for broken shells.
1316         * configure:  Rebuilt.
1317
1318 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1319
1320         * common/run.c (main): Initialize the callbacks.
1321
1322 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1323
1324         * Makefile.in (maintainer-clean): New synonym for realclean.
1325
1326 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1327
1328         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1329         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1330
1331 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1332
1333         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1334         <cagney@highland.com.au>.
1335         * configure: Regnerate from configure.in.
1336
1337 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1338
1339         * Update all FSF addresses except those in COPYING* files.
1340
1341 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1342
1343         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1344         submakes either default or passed in value.
1345
1346 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1347
1348         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1349           install): Changed targets so that they descend all
1350           subdirectories in $(SUBDIRS).
1351           (*-all, *-clean, *-install): Removed targets.
1352
1353         * configure.in: Don't bother with target makefile fragments, they
1354           are no longer needed.
1355         * configure: regenerated.
1356
1357         * Makefile.in, configure.in: converted to autoconf.
1358         * configure: New file, generated with autconf 2.4.
1359
1360 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1361
1362         * Makefile.in: Support ARM.
1363         * configure.in: Ditto.
1364
1365 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1366
1367         * Makefile.in: Support W65.
1368         * configure.in: Ditto.
1369
1370 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1371
1372         * Makefile.in: Add TAGS target.
1373
1374 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1375
1376         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1377           install-h8300, clean-h8300, all-h8500, install-h8500,
1378           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1379           recursion lines.
1380
1381 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1382
1383         * Makefile.in: remove endian.h trace from h8500
1384
1385 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1386
1387         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1388
1389 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1390
1391         * Makefile.in: make all of the all-* target (except all-nothing)
1392         depend on endian.h, so that if we're not building a simulator, we
1393         don't built endian
1394
1395 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1396
1397         * Makefile.in (check, installcheck): Added dummy targets.
1398
1399 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1400
1401         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1402         explicitly make it, since some makes apparently don't work with
1403         VPATH and .c to executable rules (SunOS make for example).
1404
1405 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1406
1407         * Makefile.in (endian): Add explicit rule for broken makes.
1408
1409 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1410
1411         * Makefile.in (info, install-info): New targets.
1412         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1413         level Makefile.
1414
1415 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1416
1417         * Makefile.in (endian.h): build endian.h via a temporary file so
1418           that we don't leave an incomplete file lying around on
1419           interrupted builds.
1420           (clean): remove endian, e.h, and endian.h.
1421
1422 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1423
1424         * Makefile.in, configure.in: if target isn't supported, build a
1425         harmless makefile.
1426
1427