sim/common/aclocal.m4

   1 # This file contains common code used by all simulators.
   2 #
   3 # SIM_AC_COMMON invokes AC macros used by all simulators and by the common
   4 # directory.  It is intended to be invoked before any target specific stuff.
   5 # SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.
   6 # It is intended to be invoked last.
   7 #
   8 # The simulator's configure.in should look like:
   9 #
  10 # dnl Process this file with autoconf to produce a configure script.
  11 # sinclude(../common/aclocal.m4)
  12 # AC_PREREQ(2.5)dnl
  13 # AC_INIT(Makefile.in)
  14 #
  15 # SIM_AC_COMMON
  16 #
  17 # ... target specific stuff ...
  18 #
  19 # SIM_AC_OUTPUT
  20
  21 AC_DEFUN(SIM_AC_COMMON,
  22 [
  23 # autoconf.info says this should be called right after AC_INIT.
  24 AC_CONFIG_HEADER(ifelse([$1],,config.h,[$1]):config.in)
  25 AC_CANONICAL_SYSTEM
  26 AC_ARG_PROGRAM
  27 AC_PROG_CC
  28 AC_PROG_INSTALL
  29
  30 # Put a plausible default for CC_FOR_BUILD in Makefile.
  31 if test "x$cross_compiling" = "xno"; then
  32   CC_FOR_BUILD='$(CC)'
  33 else
  34   CC_FOR_BUILD=gcc
  35 fi
  36 AC_SUBST(CC_FOR_BUILD)
  37
  38 AC_SUBST(CFLAGS)
  39 AC_SUBST(HDEFINES)
  40 AR=${AR-ar}
  41 AC_SUBST(AR)
  42 AC_PROG_RANLIB
  43
  44 dnl We don't use gettext, but bfd does.  So we do the appropriate checks
  45 dnl to see if there are intl libraries we should link against.
  46 ALL_LINGUAS=
  47 ZW_GNU_GETTEXT_SISTER_DIR(../../intl)
  48
  49 # Check for common headers.
  50 # FIXME: Seems to me this can cause problems for i386-windows hosts.
  51 # At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
  52 AC_CHECK_HEADERS(stdlib.h string.h strings.h unistd.h time.h)
  53 AC_CHECK_HEADERS(sys/time.h sys/resource.h)
  54 AC_CHECK_HEADERS(fcntl.h fpu_control.h)
  55 AC_CHECK_HEADERS(dlfcn.h errno.h sys/stat.h)
  56 AC_CHECK_FUNCS(getrusage time sigaction __setfpucw)
  57
  58 # Check for socket libraries
  59 AC_CHECK_LIB(socket, bind)
  60 AC_CHECK_LIB(nsl, gethostbyname)
  61
  62 . ${srcdir}/../../bfd/configure.host
  63
  64 dnl Standard (and optional) simulator options.
  65 dnl Eventually all simulators will support these.
  66 dnl Do not add any here that cannot be supported by all simulators.
  67 dnl Do not add similar but different options to a particular simulator,
  68 dnl all shall eventually behave the same way.
  69
  70
  71 dnl We don't use automake, but we still want to support
  72 dnl --enable-maintainer-mode.
  73 USE_MAINTAINER_MODE=no
  74 AC_ARG_ENABLE(maintainer-mode,
  75 [  --enable-maintainer-mode             Enable developer functionality.],
  76 [case "${enableval}" in
  77   yes)  MAINT="" USE_MAINTAINER_MODE=yes ;;
  78   no)   MAINT="#" ;;
  79   *)    AC_MSG_ERROR("--enable-maintainer-mode does not take a value"); MAINT="#" ;;
  80 esac
  81 if test x"$silent" != x"yes" && test x"$MAINT" = x""; then
  82   echo "Setting maintainer mode" 6>&1
  83 fi],[MAINT="#"])dnl
  84 AC_SUBST(MAINT)
  85
  86
  87 dnl This is a generic option to enable special byte swapping
  88 dnl insns on *any* cpu.
  89 AC_ARG_ENABLE(sim-bswap,
  90 [  --enable-sim-bswap                   Use Host specific BSWAP instruction.],
  91 [case "${enableval}" in
  92   yes)  sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
  93   no)   sim_bswap="-DWITH_BSWAP=0";;
  94   *)    AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
  95 esac
  96 if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
  97   echo "Setting bswap flags = $sim_bswap" 6>&1
  98 fi],[sim_bswap=""])dnl
  99 AC_SUBST(sim_bswap)
 100
 101
 102 AC_ARG_ENABLE(sim-cflags,
 103 [  --enable-sim-cflags=opts             Extra CFLAGS for use in building simulator],
 104 [case "${enableval}" in
 105   yes)   sim_cflags="-O2 -fomit-frame-pointer";;
 106   trace) AC_MSG_ERROR("Please use --enable-sim-debug instead."); sim_cflags="";;
 107   no)    sim_cflags="";;
 108   *)     sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
 109 esac
 110 if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
 111   echo "Setting sim cflags = $sim_cflags" 6>&1
 112 fi],[sim_cflags=""])dnl
 113 AC_SUBST(sim_cflags)
 114
 115
 116 dnl --enable-sim-debug is for developers of the simulator
 117 dnl the allowable values are work-in-progress
 118 AC_ARG_ENABLE(sim-debug,
 119 [  --enable-sim-debug=opts              Enable debugging flags],
 120 [case "${enableval}" in
 121   yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";;
 122   no)  sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";;
 123   *)   sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";;
 124 esac
 125 if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then
 126   echo "Setting sim debug = $sim_debug" 6>&1
 127 fi],[sim_debug=""])dnl
 128 AC_SUBST(sim_debug)
 129
 130
 131 dnl --enable-sim-stdio is for users of the simulator
 132 dnl It determines if IO from the program is routed through STDIO (buffered)
 133 AC_ARG_ENABLE(sim-stdio,
 134 [  --enable-sim-stdio                   Specify whether to use stdio for console input/output.],
 135 [case "${enableval}" in
 136   yes)  sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
 137   no)   sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
 138   *)    AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-stdio"); sim_stdio="";;
 139 esac
 140 if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
 141   echo "Setting stdio flags = $sim_stdio" 6>&1
 142 fi],[sim_stdio=""])dnl
 143 AC_SUBST(sim_stdio)
 144
 145
 146 dnl --enable-sim-trace is for users of the simulator
 147 dnl The argument is either a bitmask of things to enable [exactly what is
 148 dnl up to the simulator], or is a comma separated list of names of tracing
 149 dnl elements to enable.  The latter is only supported on simulators that
 150 dnl use WITH_TRACE.
 151 AC_ARG_ENABLE(sim-trace,
 152 [  --enable-sim-trace=opts              Enable tracing flags],
 153 [case "${enableval}" in
 154   yes)  sim_trace="-DTRACE=1 -DWITH_TRACE=-1";;
 155   no)   sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
 156   [[-0-9]]*)
 157         sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
 158   [[a-z]]*)
 159         sim_trace=""
 160         for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
 161           if test x"$sim_trace" = x; then
 162             sim_trace="-DWITH_TRACE='(TRACE_$x"
 163           else
 164             sim_trace="${sim_trace}|TRACE_$x"
 165           fi
 166         done
 167         sim_trace="$sim_trace)'" ;;
 168 esac
 169 if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
 170   echo "Setting sim trace = $sim_trace" 6>&1
 171 fi],[sim_trace=""])dnl
 172 AC_SUBST(sim_trace)
 173
 174
 175 dnl --enable-sim-profile
 176 dnl The argument is either a bitmask of things to enable [exactly what is
 177 dnl up to the simulator], or is a comma separated list of names of profiling
 178 dnl elements to enable.  The latter is only supported on simulators that
 179 dnl use WITH_PROFILE.
 180 AC_ARG_ENABLE(sim-profile,
 181 [  --enable-sim-profile=opts            Enable profiling flags],
 182 [case "${enableval}" in
 183   yes)  sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";;
 184   no)   sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";;
 185   [[-0-9]]*)
 186         sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";;
 187   [[a-z]]*)
 188         sim_profile=""
 189         for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
 190           if test x"$sim_profile" = x; then
 191             sim_profile="-DWITH_PROFILE='(PROFILE_$x"
 192           else
 193             sim_profile="${sim_profile}|PROFILE_$x"
 194           fi
 195         done
 196         sim_profile="$sim_profile)'" ;;
 197 esac
 198 if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then
 199   echo "Setting sim profile = $sim_profile" 6>&1
 200 fi],[sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1"])dnl
 201 AC_SUBST(sim_profile)
 202
 203
 204 dnl Types used by common code
 205 AC_TYPE_SIGNAL
 206
 207 dnl Detect exe extension
 208 AC_EXEEXT
 209
 210 dnl These are available to append to as desired.
 211 sim_link_files=
 212 sim_link_links=
 213
 214 dnl Create tconfig.h either from simulator's tconfig.in or default one
 215 dnl in common.
 216 sim_link_links=tconfig.h
 217 if test -f ${srcdir}/tconfig.in
 218 then
 219   sim_link_files=tconfig.in
 220 else
 221   sim_link_files=../common/tconfig.in
 222 fi
 223
 224 # targ-vals.def points to the libc macro description file.
 225 case "${target}" in
 226 *-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
 227 esac
 228 sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
 229 sim_link_links="${sim_link_links} targ-vals.def"
 230
 231 ]) dnl End of SIM_AC_COMMON
 232
 233
 234 dnl Additional SIM options that can (optionally) be configured
 235 dnl For optional simulator options, a macro SIM_AC_OPTION_* is defined.
 236 dnl Simulators that wish to use the relevant option specify the macro
 237 dnl in the simulator specific configure.in file between the SIM_AC_COMMON
 238 dnl and SIM_AC_OUTPUT lines.
 239
 240
 241 dnl Specify the running environment.
 242 dnl If the simulator invokes this in its configure.in then without this option
 243 dnl the default is the user environment and all are runtime selectable.
 244 dnl If the simulator doesn't invoke this, only the user environment is
 245 dnl supported.
 246 dnl ??? Until there is demonstrable value in doing something more complicated,
 247 dnl let's not.
 248 AC_DEFUN(SIM_AC_OPTION_ENVIRONMENT,
 249 [
 250 AC_ARG_ENABLE(sim-environment,
 251 [  --enable-sim-environment=environment Specify mixed, user, virtual or operating environment.],
 252 [case "${enableval}" in
 253   all | ALL)             sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
 254   user | USER)           sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
 255   virtual | VIRTUAL)     sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
 256   operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
 257   *)   AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-environment");
 258        sim_environment="";;
 259 esac
 260 if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
 261   echo "Setting sim environment = $sim_environment" 6>&1
 262 fi],
 263 [sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"])dnl
 264 ])
 265 AC_SUBST(sim_environment)
 266
 267
 268 dnl Specify the alignment restrictions of the target architecture.
 269 dnl Without this option all possible alignment restrictions are accommodated.
 270 dnl arg[1] is hardwired target alignment
 271 dnl arg[2] is default target alignment
 272 AC_DEFUN(SIM_AC_OPTION_ALIGNMENT,
 273 wire_alignment="[$1]"
 274 default_alignment="[$2]"
 275 [
 276 AC_ARG_ENABLE(sim-alignment,
 277 [  --enable-sim-alignment=align         Specify strict,  nonstrict or forced alignment of memory accesses.],
 278 [case "${enableval}" in
 279   strict | STRICT)       sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
 280   nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
 281   forced | FORCED)       sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;
 282   yes) if test x"$wire_alignment" != x; then
 283          sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
 284        else
 285          if test x"$default_alignment" != x; then
 286            sim_alignment="-DWITH_ALIGNMENT=${default_alignment}"
 287          else
 288            echo "No hard-wired alignment for target $target" 1>&6
 289            sim_alignment="-DWITH_ALIGNMENT=0"
 290          fi
 291        fi;;
 292   no)  if test x"$default_alignment" != x; then
 293          sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
 294        else
 295          if test x"$wire_alignment" != x; then
 296            sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}"
 297          else
 298            echo "No default alignment for target $target" 1>&6
 299            sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
 300          fi
 301        fi;;
 302   *)   AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
 303 esac
 304 if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
 305   echo "Setting alignment flags = $sim_alignment" 6>&1
 306 fi],
 307 [if test x"$default_alignment" != x; then
 308   sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
 309 else
 310   if test x"$wire_alignment" != x; then
 311     sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
 312   else
 313     sim_alignment=
 314   fi
 315 fi])dnl
 316 ])dnl
 317 AC_SUBST(sim_alignment)
 318
 319
 320 dnl Conditionally compile in assertion statements.
 321 AC_DEFUN(SIM_AC_OPTION_ASSERT,
 322 [
 323 AC_ARG_ENABLE(sim-assert,
 324 [  --enable-sim-assert                  Specify whether to perform random assertions.],
 325 [case "${enableval}" in
 326   yes)  sim_assert="-DWITH_ASSERT=1";;
 327   no)   sim_assert="-DWITH_ASSERT=0";;
 328   *)    AC_MSG_ERROR("--enable-sim-assert does not take a value"); sim_assert="";;
 329 esac
 330 if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
 331   echo "Setting assert flags = $sim_assert" 6>&1
 332 fi],[sim_assert=""])dnl
 333 ])
 334 AC_SUBST(sim_assert)
 335
 336
 337
 338 dnl --enable-sim-bitsize is for developers of the simulator
 339 dnl It specifies the number of BITS in the target.
 340 dnl arg[1] is the number of bits in a word
 341 dnl arg[2] is the number assigned to the most significant bit
 342 dnl arg[3] is the number of bits in an address
 343 dnl arg[4] is the number of bits in an OpenFirmware cell.
 344 dnl FIXME: this information should be obtained from bfd/archure
 345 AC_DEFUN(SIM_AC_OPTION_BITSIZE,
 346 wire_word_bitsize="[$1]"
 347 wire_word_msb="[$2]"
 348 wire_address_bitsize="[$3]"
 349 wire_cell_bitsize="[$4]"
 350 [AC_ARG_ENABLE(sim-bitsize,
 351 [  --enable-sim-bitsize=N               Specify target bitsize (32 or 64).],
 352 [sim_bitsize=
 353 case "${enableval}" in
 354   64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
 355   32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
 356   64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
 357   32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
 358   32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
 359         sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"
 360       else
 361         sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"
 362       fi ;;
 363   64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
 364         sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"
 365       else
 366         sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"
 367       fi ;;
 368   *)  AC_MSG_ERROR("--enable-sim-bitsize was given $enableval.  Expected 32 or 64") ;;
 369 esac
 370 # address bitsize
 371 tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9]]*,*//"`
 372 case x"${tmp}" in
 373   x ) ;;
 374   x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;
 375   x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;
 376   * ) AC_MSG_ERROR("--enable-sim-bitsize was given address size $enableval.  Expected 32 or 64") ;;
 377 esac
 378 # cell bitsize
 379 tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9*]]*,*[[0-9]]*,*//"`
 380 case x"${tmp}" in
 381   x ) ;;
 382   x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;
 383   x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;
 384   * ) AC_MSG_ERROR("--enable-sim-bitsize was given cell size $enableval.  Expected 32 or 64") ;;
 385 esac
 386 if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
 387   echo "Setting bitsize flags = $sim_bitsize" 6>&1
 388 fi],
 389 [sim_bitsize=""
 390 if test x"$wire_word_bitsize" != x; then
 391   sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"
 392 fi
 393 if test x"$wire_word_msb" != x; then
 394   sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"
 395 fi
 396 if test x"$wire_address_bitsize" != x; then
 397   sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"
 398 fi
 399 if test x"$wire_cell_bitsize" != x; then
 400   sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"
 401 fi])dnl
 402 ])
 403 AC_SUBST(sim_bitsize)
 404
 405
 406
 407 dnl --enable-sim-endian={yes,no,big,little} is for simulators
 408 dnl that support both big and little endian targets.
 409 dnl arg[1] is hardwired target endianness.
 410 dnl arg[2] is default target endianness.
 411 AC_DEFUN(SIM_AC_OPTION_ENDIAN,
 412 [
 413 wire_endian="[$1]"
 414 default_endian="[$2]"
 415 AC_ARG_ENABLE(sim-endian,
 416 [  --enable-sim-endian=endian           Specify target byte endian orientation.],
 417 [case "${enableval}" in
 418   b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
 419   l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
 420   yes)   if test x"$wire_endian" != x; then
 421            sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
 422          else
 423            if test x"$default_endian" != x; then
 424              sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
 425            else
 426              echo "No hard-wired endian for target $target" 1>&6
 427              sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
 428            fi
 429          fi;;
 430   no)    if test x"$default_endian" != x; then
 431            sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
 432          else
 433            if test x"$wire_endian" != x; then
 434              sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
 435            else
 436              echo "No default endian for target $target" 1>&6
 437              sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
 438            fi
 439          fi;;
 440   *)     AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
 441 esac
 442 if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
 443   echo "Setting endian flags = $sim_endian" 6>&1
 444 fi],
 445 [if test x"$default_endian" != x; then
 446   sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
 447 else
 448   if test x"$wire_endian" != x; then
 449     sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
 450   else
 451     sim_endian=
 452   fi
 453 fi])dnl
 454 ])
 455 AC_SUBST(sim_endian)
 456
 457
 458 dnl --enable-sim-hostendian is for users of the simulator when
 459 dnl they find that AC_C_BIGENDIAN does not function correctly
 460 dnl (for instance in a canadian cross)
 461 AC_DEFUN(SIM_AC_OPTION_HOSTENDIAN,
 462 [
 463 AC_ARG_ENABLE(sim-hostendian,
 464 [  --enable-sim-hostendian=end          Specify host byte endian orientation.],
 465 [case "${enableval}" in
 466   no)    sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
 467   b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
 468   l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
 469   *)     AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";;
 470 esac
 471 if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
 472   echo "Setting hostendian flags = $sim_hostendian" 6>&1
 473 fi],[
 474 if test "x$cross_compiling" = "xno"; then
 475   AC_C_BIGENDIAN
 476   if test $ac_cv_c_bigendian = yes; then
 477     sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
 478   else
 479     sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
 480   fi
 481 else
 482   sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
 483 fi])dnl
 484 ])
 485 AC_SUBST(sim_hostendian)
 486
 487
 488 dnl --enable-sim-float is for developers of the simulator
 489 dnl It specifies the presence of hardware floating point
 490 dnl And optionally the bitsize of the floating point register.
 491 dnl arg[1] specifies the presence (or absence) of floating point hardware
 492 dnl arg[2] specifies the number of bits in a floating point register
 493 AC_DEFUN(SIM_AC_OPTION_FLOAT,
 494 [
 495 default_sim_float="[$1]"
 496 default_sim_float_bitsize="[$2]"
 497 AC_ARG_ENABLE(sim-float,
 498 [  --enable-sim-float                   Specify that the target processor has floating point hardware.],
 499 [case "${enableval}" in
 500   yes | hard)   sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
 501   no | soft)    sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
 502   32)           sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=32";;
 503   64)           sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=64";;
 504   *)            AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;
 505 esac
 506 if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
 507   echo "Setting float flags = $sim_float" 6>&1
 508 fi],[
 509 sim_float=
 510 if test x"${default_sim_float}" != x""; then
 511   sim_float="-DWITH_FLOATING_POINT=${default_sim_float}"
 512 fi
 513 if test x"${default_sim_float_bitsize}" != x""; then
 514   sim_float="$sim_float -DWITH_TARGET_FLOATING_POINT_BITSIZE=${default_sim_float_bitsize}"
 515 fi
 516 ])dnl
 517 ])
 518 AC_SUBST(sim_float)
 519
 520
 521 dnl The argument is the default cache size if none is specified.
 522 AC_DEFUN(SIM_AC_OPTION_SCACHE,
 523 [
 524 default_sim_scache="ifelse([$1],,0,[$1])"
 525 AC_ARG_ENABLE(sim-scache,
 526 [  --enable-sim-scache=size             Specify simulator execution cache size.],
 527 [case "${enableval}" in
 528   yes)  sim_scache="-DWITH_SCACHE=${default_sim_scache}";;
 529   no)   sim_scache="-DWITH_SCACHE=0" ;;
 530   [[0-9]]*) sim_scache="-DWITH_SCACHE=${enableval}";;
 531   *)    AC_MSG_ERROR("Bad value $enableval passed to --enable-sim-scache");
 532         sim_scache="";;
 533 esac
 534 if test x"$silent" != x"yes" && test x"$sim_scache" != x""; then
 535   echo "Setting scache size = $sim_scache" 6>&1
 536 fi],[sim_scache="-DWITH_SCACHE=${default_sim_scache}"])
 537 ])
 538 AC_SUBST(sim_scache)
 539
 540
 541 dnl The argument is the default model if none is specified.
 542 AC_DEFUN(SIM_AC_OPTION_DEFAULT_MODEL,
 543 [
 544 default_sim_default_model="ifelse([$1],,0,[$1])"
 545 AC_ARG_ENABLE(sim-default-model,
 546 [  --enable-sim-default-model=model     Specify default model to simulate.],
 547 [case "${enableval}" in
 548   yes|no) AC_MSG_ERROR("Missing argument to --enable-sim-default-model");;
 549   *)    sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";;
 550 esac
 551 if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
 552   echo "Setting default model = $sim_default_model" 6>&1
 553 fi],[sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'"])
 554 ])
 555 AC_SUBST(sim_default_model)
 556
 557
 558 dnl --enable-sim-hardware is for users of the simulator
 559 dnl arg[1] Enable sim-hw by default? ("yes" or "no")
 560 dnl arg[2] is a space separated list of devices that override the defaults
 561 dnl arg[3] is a space separated list of extra target specific devices.
 562 AC_DEFUN(SIM_AC_OPTION_HARDWARE,
 563 [
 564 if test x"[$1]" = x"yes"; then
 565   sim_hw_p=yes
 566 else
 567   sim_hw_p=no
 568 fi
 569 if test "[$2]"; then
 570   hardware="core pal glue"
 571 else
 572   hardware="core pal glue [$3]"
 573 fi
 574 sim_hw_cflags="-DWITH_HW=1"
 575 sim_hw="$hardware"
 576 sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`"
 577 AC_ARG_ENABLE(sim-hardware,
 578 [  --enable-sim-hardware=LIST           Specify the hardware to be included in the build.],
 579 [
 580 case "${enableval}" in
 581   yes)  sim_hw_p=yes;;
 582   no)   sim_hw_p=no;;
 583   ,*)   sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
 584   *,)   sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
 585   *)    sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
 586 esac
 587 if test "$sim_hw_p" != yes; then
 588   sim_hw_objs=
 589   sim_hw_cflags="-DWITH_HW=0"
 590   sim_hw=
 591 else
 592   sim_hw_cflags="-DWITH_HW=1"
 593   # remove duplicates
 594   sim_hw=""
 595   sim_hw_objs="\$(SIM_COMMON_HW_OBJS)"
 596   for i in $hardware ; do
 597     case " $sim_hw " in
 598       *" $i "*) ;;
 599       *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
 600     esac
 601   done
 602 fi
 603 if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
 604   echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
 605 fi],[
 606 if test "$sim_hw_p" != yes; then
 607   sim_hw_objs=
 608   sim_hw_cflags="-DWITH_HW=0"
 609   sim_hw=
 610 fi
 611 if test x"$silent" != x"yes"; then
 612   echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
 613 fi])dnl
 614 ])
 615 AC_SUBST(sim_hw_cflags)
 616 AC_SUBST(sim_hw_objs)
 617 AC_SUBST(sim_hw)
 618
 619
 620 dnl --enable-sim-inline is for users that wish to ramp up the simulator's
 621 dnl performance by inlining functions.
 622 dnl Guarantee that unconfigured simulators do not do any inlining
 623 sim_inline="-DDEFAULT_INLINE=0"
 624 AC_DEFUN(SIM_AC_OPTION_INLINE,
 625 [
 626 default_sim_inline="ifelse([$1],,,-DDEFAULT_INLINE=[$1])"
 627 AC_ARG_ENABLE(sim-inline,
 628 [  --enable-sim-inline=inlines          Specify which functions should be inlined.],
 629 [sim_inline=""
 630 case "$enableval" in
 631   no)           sim_inline="-DDEFAULT_INLINE=0";;
 632   0)            sim_inline="-DDEFAULT_INLINE=0";;
 633   yes | 2)      sim_inline="-DDEFAULT_INLINE=ALL_C_INLINE";;
 634   1)            sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
 635   *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
 636        new_flag=""
 637        case "$x" in
 638          *_INLINE=*)    new_flag="-D$x";;
 639          *=*)           new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
 640          *_INLINE)      new_flag="-D$x=ALL_C_INLINE";;
 641          *)             new_flag="-D$x""_INLINE=ALL_C_INLINE";;
 642        esac
 643        if test x"$sim_inline" = x""; then
 644          sim_inline="$new_flag"
 645        else
 646          sim_inline="$sim_inline $new_flag"
 647        fi
 648      done;;
 649 esac
 650 if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
 651   echo "Setting inline flags = $sim_inline" 6>&1
 652 fi],[
 653 if test "x$cross_compiling" = "xno"; then
 654   if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then
 655     sim_inline="${default_sim_inline}"
 656     if test x"$silent" != x"yes"; then
 657       echo "Setting inline flags = $sim_inline" 6>&1
 658     fi
 659   else
 660     sim_inline=""
 661   fi
 662 else
 663   sim_inline="-DDEFAULT_INLINE=0"
 664 fi])dnl
 665 ])
 666 AC_SUBST(sim_inline)
 667
 668
 669 AC_DEFUN(SIM_AC_OPTION_PACKAGES,
 670 [
 671 AC_ARG_ENABLE(sim-packages,
 672 [  --enable-sim-packages=list           Specify the packages to be included in the build.],
 673 [packages=disklabel
 674 case "${enableval}" in
 675   yes)  ;;
 676   no)   AC_MSG_ERROR("List of packages must be specified for --enable-sim-packages"); packages="";;
 677   ,*)   packages="${packages}${enableval}";;
 678   *,)   packages="${enableval}${packages}";;
 679   *)    packages="${enableval}"'';;
 680 esac
 681 sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
 682 sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
 683 if test x"$silent" != x"yes" && test x"$packages" != x""; then
 684   echo "Setting packages to $sim_pk_src, $sim_pk_obj"
 685 fi],[packages=disklabel
 686 sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
 687 sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
 688 if test x"$silent" != x"yes"; then
 689   echo "Setting packages to $sim_pk_src, $sim_pk_obj"
 690 fi])dnl
 691 ])
 692 AC_SUBST(sim_packages)
 693
 694
 695 AC_DEFUN(SIM_AC_OPTION_REGPARM,
 696 [
 697 AC_ARG_ENABLE(sim-regparm,
 698 [  --enable-sim-regparm=nr-parm         Pass parameters in registers instead of on the stack - x86/GCC specific.],
 699 [case "${enableval}" in
 700   0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";;
 701   no)                            sim_regparm="" ;;
 702   yes)                           sim_regparm="-DWITH_REGPARM=3";;
 703   *)   AC_MSG_ERROR("Unknown value $enableval for --enable-sim-regparm"); sim_regparm="";;
 704 esac
 705 if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then
 706   echo "Setting regparm flags = $sim_regparm" 6>&1
 707 fi],[sim_regparm=""])dnl
 708 ])
 709 AC_SUBST(sim_regparm)
 710
 711
 712 AC_DEFUN(SIM_AC_OPTION_RESERVED_BITS,
 713 [
 714 default_sim_reserved_bits="ifelse([$1],,1,[$1])"
 715 AC_ARG_ENABLE(sim-reserved-bits,
 716 [  --enable-sim-reserved-bits           Specify whether to check reserved bits in instruction.],
 717 [case "${enableval}" in
 718   yes)  sim_reserved_bits="-DWITH_RESERVED_BITS=1";;
 719   no)   sim_reserved_bits="-DWITH_RESERVED_BITS=0";;
 720   *)    AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved_bits="";;
 721 esac
 722 if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then
 723   echo "Setting reserved flags = $sim_reserved_bits" 6>&1
 724 fi],[sim_reserved_bits="-DWITH_RESERVED_BITS=${default_sim_reserved_bits}"])dnl
 725 ])
 726 AC_SUBST(sim_reserved_bits)
 727
 728
 729 AC_DEFUN(SIM_AC_OPTION_SMP,
 730 [
 731 default_sim_smp="ifelse([$1],,5,[$1])"
 732 AC_ARG_ENABLE(sim-smp,
 733 [  --enable-sim-smp=n                   Specify number of processors to configure for (default ${default_sim_smp}).],
 734 [case "${enableval}" in
 735   yes)  sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";;
 736   no)   sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";;
 737   *)    sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";;
 738 esac
 739 if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then
 740   echo "Setting smp flags = $sim_smp" 6>&1
 741 fi],[sim_smp="-DWITH_SMP=${default_sim_smp}" ; sim_igen_smp="-N ${default_sim_smp}"
 742 if test x"$silent" != x"yes"; then
 743   echo "Setting smp flags = $sim_smp" 6>&1
 744 fi])dnl
 745 ])
 746 AC_SUBST(sim_smp)
 747
 748
 749 AC_DEFUN(SIM_AC_OPTION_STDCALL,
 750 [
 751 AC_ARG_ENABLE(sim-stdcall,
 752 [  --enable-sim-stdcall=type            Use an alternative function call/return mechanism - x86/GCC specific.],
 753 [case "${enableval}" in
 754   no)           sim_stdcall="" ;;
 755   std*)         sim_stdcall="-DWITH_STDCALL=1";;
 756   yes)          sim_stdcall="-DWITH_STDCALL=1";;
 757   *)   AC_MSG_ERROR("Unknown value $enableval for --enable-sim-stdcall"); sim_stdcall="";;
 758 esac
 759 if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then
 760   echo "Setting function call flags = $sim_stdcall" 6>&1
 761 fi],[sim_stdcall=""])dnl
 762 ])
 763 AC_SUBST(sim_stdcall)
 764
 765
 766 AC_DEFUN(SIM_AC_OPTION_XOR_ENDIAN,
 767 [
 768 default_sim_xor_endian="ifelse([$1],,8,[$1])"
 769 AC_ARG_ENABLE(sim-xor-endian,
 770 [  --enable-sim-xor-endian=n            Specify number bytes involved in XOR bi-endian mode (default ${default_sim_xor_endian}).],
 771 [case "${enableval}" in
 772   yes)  sim_xor_endian="-DWITH_XOR_ENDIAN=8";;
 773   no)   sim_xor_endian="-DWITH_XOR_ENDIAN=0";;
 774   *)    sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;
 775 esac
 776 if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then
 777   echo "Setting xor-endian flag = $sim_xor_endian" 6>&1
 778 fi],[sim_xor_endian="-DWITH_XOR_ENDIAN=${default_sim_xor_endian}"])dnl
 779 ])
 780 AC_SUBST(sim_xor_endian)
 781
 782
 783 dnl --enable-build-warnings is for developers of the simulator.
 784 dnl it enables extra GCC specific warnings.
 785 AC_DEFUN(SIM_AC_OPTION_WARNINGS,
 786 [
 787 # NOTE: Don't add -Wall or -Wunused, they both include
 788 # -Wunused-parameter which reports bogus warnings.
 789 # NOTE: If you add to this list, remember to update
 790 # gdb/doc/gdbint.texinfo.
 791 build_warnings="-Wimplicit -Wreturn-type -Wcomment -Wtrigraphs \
 792 -Wformat -Wparentheses -Wpointer-arith"
 793 # GCC supports -Wuninitialized only with -O or -On, n != 0.
 794 if test x${CFLAGS+set} = xset; then
 795   case "${CFLAGS}" in
 796     *"-O0"* ) ;;
 797     *"-O"* )
 798       build_warnings="${build_warnings} -Wuninitialized"
 799     ;;
 800   esac
 801 else
 802   build_warnings="${build_warnings} -Wuninitialized"
 803 fi
 804 # Up for debate: -Wswitch -Wcomment -trigraphs -Wtrigraphs
 805 # -Wunused-function -Wunused-label -Wunused-variable -Wunused-value
 806 # -Wchar-subscripts -Wtraditional -Wshadow -Wcast-qual
 807 # -Wcast-align -Wwrite-strings -Wconversion -Wstrict-prototypes
 808 # -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls
 809 # -Woverloaded-virtual -Winline -Werror"
 810 AC_ARG_ENABLE(build-warnings,
 811 [  --enable-build-warnings Enable build-time compiler warnings if gcc is used],
 812 [case "${enableval}" in
 813   yes)  ;;
 814   no)   build_warnings="-w";;
 815   ,*)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
 816         build_warnings="${build_warnings} ${t}";;
 817   *,)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
 818         build_warnings="${t} ${build_warnings}";;
 819   *)    build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
 820 esac
 821 if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
 822   echo "Setting compiler warning flags = $build_warnings" 6>&1
 823 fi])dnl
 824 AC_ARG_ENABLE(sim-build-warnings,
 825 [  --enable-gdb-build-warnings Enable SIM specific build-time compiler warnings if gcc is used],
 826 [case "${enableval}" in
 827   yes)  ;;
 828   no)   build_warnings="-w";;
 829   ,*)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
 830         build_warnings="${build_warnings} ${t}";;
 831   *,)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
 832         build_warnings="${t} ${build_warnings}";;
 833   *)    build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
 834 esac
 835 if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
 836   echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
 837 fi])dnl
 838 WARN_CFLAGS=""
 839 WERROR_CFLAGS=""
 840 if test "x${build_warnings}" != x -a "x$GCC" = xyes
 841 then
 842     AC_MSG_CHECKING(compiler warning flags)
 843     # Separate out the -Werror flag as some files just cannot be
 844     # compiled with it enabled.
 845     for w in ${build_warnings}; do
 846         case $w in
 847         -Werr*) WERROR_CFLAGS=-Werror ;;
 848         *) # Check that GCC accepts it
 849             saved_CFLAGS="$CFLAGS"
 850             CFLAGS="$CFLAGS $w"
 851             AC_TRY_COMPILE([],[],WARN_CFLAGS="${WARN_CFLAGS} $w",)
 852             CFLAGS="$saved_CFLAGS"
 853         esac
 854     done
 855     AC_MSG_RESULT(${WARN_CFLAGS}${WERROR_CFLAGS})
 856 fi
 857 ])
 858 AC_SUBST(WARN_CFLAGS)
 859 AC_SUBST(WERROR_CFLAGS)
 860
 861
 862 dnl Generate the Makefile in a target specific directory.
 863 dnl Substitutions aren't performed on the file in AC_SUBST_FILE,
 864 dnl so this is a cover macro to tuck the details away of how we cope.
 865 dnl We cope by having autoconf generate two files and then merge them into
 866 dnl one afterwards.  The two pieces of the common fragment are inserted into
 867 dnl the target's fragment at the appropriate points.
 868
 869 AC_DEFUN(SIM_AC_OUTPUT,
 870 [
 871 AC_LINK_FILES($sim_link_files, $sim_link_links)
 872 dnl Make @cgen_breaks@ non-null only if the sim uses CGEN.
 873 cgen_breaks=""
 874 if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then
 875 cgen_breaks="break cgen_rtx_error";
 876 fi
 877 AC_SUBST(cgen_breaks)
 878 AC_CONFIG_FILES(Makefile.sim:Makefile.in)
 879 AC_CONFIG_FILES(Make-common.sim:../common/Make-common.in)
 880 AC_CONFIG_FILES(.gdbinit:../common/gdbinit.in)
 881 AC_CONFIG_COMMANDS([Makefile],
 882 [echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
 883  rm -f Makesim1.tmp Makesim2.tmp Makefile
 884  sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
 885  sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
 886  sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
 887         -e '/^## COMMON_POST_/ r Makesim2.tmp' \
 888         <Makefile.sim >Makefile
 889  rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
 890 ])
 891 AC_CONFIG_COMMANDS([stamp-h], [echo > stamp-h])
 892 AC_OUTPUT
 893 ])
 894
 895 sinclude(../../config/gettext-sister.m4)
 896 sinclude(../../config/acx.m4)
 897
 898 dnl --enable-cgen-maint support
 899 AC_DEFUN(SIM_AC_OPTION_CGEN_MAINT,
 900 [
 901 cgen_maint=no
 902 dnl Default is to use one in build tree.
 903 cgen=guile
 904 cgendir='$(srcdir)/../../cgen'
 905 dnl Having --enable-maintainer-mode take arguments is another way to go.
 906 dnl ??? One can argue --with is more appropriate if one wants to specify
 907 dnl a directory name, but what we're doing here is an enable/disable kind
 908 dnl of thing and specifying both --enable and --with is klunky.
 909 dnl If you reeely want this to be --with, go ahead and change it.
 910 AC_ARG_ENABLE(cgen-maint,
 911 [  --enable-cgen-maint[=DIR]    build cgen generated files],
 912 [case "${enableval}" in
 913   yes)  cgen_maint=yes ;;
 914   no)   cgen_maint=no ;;
 915   *)
 916         # argument is cgen install directory (not implemented yet).
 917         # Having a `share' directory might be more appropriate for the .scm,
 918         # .cpu, etc. files.
 919         cgendir=${cgen_maint}/lib/cgen
 920         cgen=guile
 921         ;;
 922 esac])dnl
 923 dnl AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} != xno)
 924 if test x${cgen_maint} != xno ; then
 925   CGEN_MAINT=''
 926 else
 927   CGEN_MAINT='#'
 928 fi
 929 AC_SUBST(CGEN_MAINT)
 930 AC_SUBST(cgendir)
 931 AC_SUBST(cgen)
 932 ])
 933 dnl FIXME: When upgrading to modern autoconf, remove
 934 dnl        SIM_CHECK_MEMBER and SIM_CHECK_MEMBERS et al and use
 935 dnl        AC_CHECK_MEMBERS from autoconf.
 936 dnl
 937 dnl Translated from a FC2 autoconf-2.59-3 installation.
 938 dnl  AC_CHECK_MEMBER(AGGREGATE.MEMBER,
 939 dnl                  [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
 940 dnl                  [INCLUDES])
 941 dnl
 942 dnl  ---------------------------------------------------------
 943 dnl  AGGREGATE.MEMBER is for instance `struct passwd.pw_gecos', shell
 944 dnl  variables are not a valid argument.
 945 AC_DEFUN([SIM_CHECK_MEMBER],
 946 dnl Extract the aggregate name, and the member name
 947 [AC_CACHE_CHECK([for $1], [ac_]patsubst([$1], [[\. ]], [_]),
 948 [ac_]patsubst([$1], [[\. ]], [_])[=no;]
 949 AC_TRY_COMPILE([$4],[
 950 dnl AGGREGATE ac_aggr;
 951 static ]patsubst([$1], [\..*])[ ac_aggr;
 952 dnl ac_aggr.MEMBER;
 953 if (ac_aggr.]patsubst([$1], [^[^.]*\.])[)
 954 return 0;],[ac_]patsubst([$1], [[\. ]], [_])[=yes;],
 955 AC_TRY_COMPILE([$4],[
 956 dnl AGGREGATE ac_aggr;
 957 static ]patsubst([$1], [\..*])[ ac_aggr;
 958 dnl ac_aggr.MEMBER;
 959 if (sizeof ac_aggr.]patsubst([$1], [^[^.]*\.])[)
 960 return 0;],
 961 [ac_]patsubst([$1], [[\. ]], [_])[=yes;],
 962 [ac_]patsubst([$1], [[\. ]], [_])[=no;]))
 963 [if test [$]ac_]patsubst([$1], [[\. ]], [_])[ = yes; then :; [$2]
 964 else :; [$3]
 965 fi])
 966 ])dnl SIM_CHECK_MEMBER
 967 dnl
 968 dnl Translated from a FC2 autoconf-2.59-3 installation.
 969 dnl  SIM_CHECK_MEMBERS([AGGREGATE.MEMBER, ...])
 970 dnl except we just work with a limited set of fixed includes.
 971 dnl
 972 AC_DEFUN([SIM_CHECK_MEMBERS_1],
 973 [ifelse($#, 1,
 974 [SIM_CHECK_MEMBER([$1],
 975 AC_DEFINE_UNQUOTED([HAVE_]translit([$1], [a-z .], [A-Z__]), 1,
 976 [Define to 1 if ]patsubst([$1],
 977 [^[^.]*\.])[ is a member of ]patsubst([$1], [\..*])[. ]),,
 978 [#ifdef HAVE_SYS_TYPES_H
 979 #include <sys/types.h>
 980 #endif
 981 #ifdef HAVE_SYS_STAT_H
 982 #include <sys/stat.h>
 983 #endif])],
 984 [SIM_CHECK_MEMBER([$1],
 985 AC_DEFINE_UNQUOTED([HAVE_]translit([$1], [a-z .], [A-Z__]), 1,
 986 [Define to 1 if ]patsubst([$1],
 987 [^[^.]*\.])[ is a member of ]patsubst([$1], [\..*])[. ]),,
 988 [#ifdef HAVE_SYS_TYPES_H
 989 #include <sys/types.h>
 990 #endif
 991 #ifdef HAVE_SYS_STAT_H
 992 #include <sys/stat.h>
 993 #endif])
 994 SIM_CHECK_MEMBERS_1(builtin(shift,$@))])])dnl SIM_CHECK_MEMBERS
 995 dnl
 996 AC_DEFUN([SIM_CHECK_MEMBERS],
 997 [ifelse($#, 1, [SIM_CHECK_MEMBERS_1($1)],
 998 [errprint(__file__:__line__:
 999 [This SIM_CHECK_MEMBERS only supports one argument,]
1000 [the list of struct tests])])])dnl SIM_CHECK_MEMBERS