sim/microblaze/ChangeLog

   1 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * interp.c (sim_close): Delete.
   4
   5 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
   6
   7         * configure: Regenerate.
   8
   9 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  10
  11         * configure: Regenerate.
  12
  13 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  14
  15         * configure: Regenerate.
  16
  17 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
  18
  19         * Makefile.in (SIM_OBJS): Add sim-resume.o.
  20         * interp.c (sim_resume): rename to ...
  21         (sim_engine_run): ... this.  Change CPU.exception setting to
  22         sim_engine_halt calls.  Change do/while to while(1).  Call
  23         sim_events_process when sim_events_tick is true.
  24         (sim_stop_reason): Delete.
  25         * sim-main.h (microblaze_regset): Delete exception member.
  26
  27 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
  28
  29         * sim-main.h (SIM_CPU): Delete.
  30
  31 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
  32
  33         * sim-main.h (sim_cia): Delete.
  34
  35 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  36
  37         * interp.c (issue_messages, wbat, wlat, what, rbat, rlat, rhat,
  38         sim_memory_size, MEM_SIZE_FLOOR, sim_size, init_pointers, sim_write,
  39         sim_read, sim_do_command): Delete.
  40         (set_initial_gprs): Delete memsize and call to init_pointers.
  41         (sim_resume): Change rlat to MEM_RD_WORD.  Change issue_messages to
  42         STATE_VERBOSE_P.
  43         (sim_store_register, sim_fetch_register): Drop call to init_pointers.
  44         (sim_open): Drop issue_messages setup.  Delete osize and call to
  45         sim_size.  Call sim_do_commandf to set the memory size.
  46         * microblaze.h (MEM): Delete.
  47         (MEM_RD_BYTE): Change rbat to sim_core_read_1.
  48         (MEM_RD_HALF): Change rhat to sim_core_read_2.
  49         (MEM_RD_WORD): Change rlat to sim_core_read_4.
  50         (MEM_WR_BYTE): Change wbat to sim_core_write_1.
  51         (MEM_WR_HALF): Change what to sim_core_write_2.
  52         (MEM_WR_WORD): Change wlat to sim_core_write_4.
  53         * sim-main.h (microblaze_regset): Delete msize and memory.
  54
  55 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  56
  57         * sim-main.h (CIA_GET, CIA_SET): Delete.
  58
  59 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  60
  61         * interp.c (microblaze_pc_get, microblaze_pc_set): New functions.
  62         (sim_open): Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
  63
  64 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
  65
  66         * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
  67         * sim-main.h (STATE_CPU): Delete.
  68
  69 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
  70
  71         * configure: Regenerate.
  72
  73 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
  74
  75         * Makefile.in (SIM_OBJS): Delete sim-engine.o.
  76
  77 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
  78
  79         * config.in, configure: Regenerate.
  80
  81 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
  82
  83         * Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS, SIM_EXTRA_LIBS): Delete.
  84         (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
  85         * interp.c: Drop sys/times.h, sys/param.h, run-sim.h, and sim-utils.h
  86         includes.
  87         (target_big_endian): Replace with CURRENT_TARGET_BYTE_ORDER.
  88         (callback, microblaze_state, sim_kind, myname, sim_trace, sim_stop,
  89         sim_load, sim_set_callbacks, sim_complete_command): Delete.
  90         (wbat, wlat, what, rbat, rlat, rhat): Add SIM_CPU* as first arg.
  91         (sim_size): Mark static and add SIM_CPU* as first arg.
  92         (init_pointers): Add SIM_CPU* as first arg and pass to sim_size.
  93         (set_initial_gprs): Add SIM_CPU* as first arg and pass to init_pointers.
  94         (sim_resume): Add local cpu variable.  Pass it to rlat.
  95         (sim_write, sim_read, sim_store_register, sim_fetch_register): Add local
  96         cpu variable.  Pass it to init_pointers.
  97         (sim_stop_reason, sim_do_command): Add local cpu variable.
  98         (sim_info): Add local cpu and callback variables.
  99         (free_state): New cleanup function.
 100         (sim_open): Rewrite to use new common logic.
 101         (sim_close): Delete body.
 102         (sim_create_inferior): Delete call to set_initial_gprs.
 103         * microblaze.h (CPU): Redefine using cpu.
 104         (MEM_RD_BYTE, MEM_RD_HALF, MEM_RD_WORD, MEM_WR_BYTE, MEM_WR_HALF,
 105         MEM_WR_WORD): Pass in cpu as first arg.
 106         * sim-main.h (CIA_GET, CIA_SET, SIM_CPU): Define.
 107         (MAX_NR_PROCESSORS): Delete.
 108         (struct sim_state): Change cpu to *cpu, and rewrite STATE_CPU.
 109
 110 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 111
 112         * interp.c (NUM_ELEM, heap_ptr, stack_ptr, memcycles, struct aout,
 113         LONG, SHORT): Delete.
 114         [WATCHFUNCTIONS]: Delete.
 115         (sim_info) [WATCHFUNCTIONS]: Delete.
 116         (sim_create_inferior): Delete avp, nargs, nenv, s_length, strings,
 117         pointers, and hi_stack.
 118         (sim_do_command): Delete the "watch" command.
 119
 120 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 121
 122         * interp.c (sim_load): Set verbose to 0 when calling sim_load_file.
 123
 124 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 125
 126         * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
 127         SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, and
 128         SIM_AC_OPTION_INLINE.
 129         * config.in, configure: Regenerate.
 130
 131 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 132
 133         * interp.c: Strip trailing whitespace.
 134
 135 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 136
 137         * configure.ac: Call SIM_AC_OPTION_WARNINGS.
 138         * confingure: Regenerate.
 139         * interp.c: Include run-sim.h.
 140         (microblaze_extract_unsigned_integer): Mark static.
 141         (microblaze_store_unsigned_integer): Likewise.
 142         (int_sbrk, SEXTB, SEXTW, IOMEM): Delete.
 143         (init_pointers, set_initial_gprs): Add (void) to prototype.
 144         (opened, log_open, log_close, is_opened, handle_trap1, process_stub,
 145         util, iu_carry): Delete.
 146
 147 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 148
 149         * config.in, configure: Regenerate.
 150
 151 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 152
 153         * Makefile.in (SIM_EXTRA_CFLAGS): Set to
 154         -DSIM_USE_DEPRECATED_RUN_FRONTEND.
 155         (SIM_RUN_OBJS): Set to run.o.
 156         (SIM_EXTRA_CLEAN): Delete.
 157         (interp.o, microblaze-clean): Delete rules.
 158
 159 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 160
 161         * configure.ac (AC_CHECK_HEADERS): Delete.
 162         * aclocal.m4, configure: Regenerate.
 163
 164 2015-03-08  Mike Frysinger  <vapier@gentoo.org>
 165
 166         * interp.c (microblaze_extract_unsigned_integer): Change %ld to %zu.
 167
 168 2015-02-20  Mike Frysinger  <vapier@gentoo.org>
 169
 170         * interp.c: Delete sysdep.h and netinet/in.h includes.
 171         Include stdlib.h and string.h and unistd.h.
 172         * sysdep.h: Delete.
 173
 174 2015-02-19  Mike Frysinger  <vapier@gentoo.org>
 175
 176         * interp.c (sim_kill): Delete unused func.
 177
 178 2015-02-19  Mike Frysinger  <vapier@gentoo.org>
 179
 180         * microblaze.isa: Add "microblaze_" prefix to "or", "and", and "xor".
 181
 182 2015-02-02  Chen Gang  <gang.chen.5i5j@gmail.com>
 183
 184         * interp.c (sim_do_command): Call freeargv() before return.
 185
 186 2014-07-01  Chen Gang  <gang.chen.5i5j@gmail.com>
 187
 188         * interp.c: Use long int format instead of int format.
 189
 190 2014-08-19  Alan Modra  <amodra@gmail.com>
 191
 192         * configure: Regenerate.
 193
 194 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 195
 196         * configure: Regenerate.
 197         * config.in: Regenerate.
 198
 199 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 200
 201         * interp.c (sim_do_command): Add const to cmd.
 202
 203 2014-03-05  Mike Frysinger  <vapier@gentoo.org>
 204
 205         * interp.c (sim_load): Add const to prog.
 206
 207 2014-02-17  Mike Frysinger  <vapier@gentoo.org>
 208
 209         PR gdb/16450
 210         * interp.c (interrupt): Delete.
 211         (sim_resume): Delete signal(SIGINT) handling.
 212
 213 2013-09-23  Alan Modra  <amodra@gmail.com>
 214
 215         * configure: Regenerate.
 216
 217 2013-06-03  Mike Frysinger  <vapier@gentoo.org>
 218
 219         * aclocal.m4, configure: Regenerate.
 220
 221 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 222
 223         * config.in, configure: Regenerate.
 224
 225 2012-03-24  Mike Frysinger  <vapier@gentoo.org>
 226
 227         * aclocal.m4, config.in, configure: Regenerate.
 228
 229 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 230
 231         * aclocal.m4: New file.
 232         * configure: Regenerate.
 233
 234 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 235
 236         * configure.ac: Change include to common/acinclude.m4.
 237
 238 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 239
 240         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
 241         call.  Replace common.m4 include with SIM_AC_COMMON.
 242         * configure: Regenerate.
 243
 244 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 245
 246         * interp.c (sim_complete_command): New stub function.
 247
 248 2010-04-14  Mike Frysinger  <vapier@gentoo.org>
 249
 250         * interp.c (sim_write): Add const to buffer arg.