sim/mn10300/ChangeLog

   1 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * configure.ac: Delete AC_CHECK_FUNCS & AC_CHECK_HEADERS calls.
   4         * op_utils.c: Delete utime.h include.
   5         * config.in, configure: Regenerate.
   6
   7 2021-04-15  John Baldwin  <jhb@FreeBSD.org>
   8
   9         * Makefile.in: (tmp-igen) Only pass mn10300.igen to igen.
  10         * mn10300.igen: Include am33-2.igen.
  11
  12 2021-04-12  Mike Frysinger  <vapier@gentoo.org>
  13
  14         * interp.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all.
  15
  16 2021-04-08  Simon Marchi  <simon.marchi@polymtl.ca>
  17
  18         * Makefile.in: Set ASAN_OPTIONS when running igen.
  19
  20 2021-04-02  Mike Frysinger  <vapier@gentoo.org>
  21
  22         * Makefile.in (../igen/igen): Delete rule.
  23         (tmp-igen): Delete ../igen make.
  24
  25 2021-04-02  Mike Frysinger  <vapier@gentoo.org>
  26
  27         * aclocal.m4, configure: Regenerate.
  28
  29 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
  30
  31         * configure: Regenerate.
  32
  33 2021-02-21  Mike Frysinger  <vapier@gentoo.org>
  34
  35         * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
  36         * aclocal.m4, configure: Regenerate.
  37
  38 2021-02-13  Mike Frysinger  <vapier@gentoo.org>
  39
  40         * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
  41         * aclocal.m4, configure: Regenerate.
  42
  43 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
  44
  45         * interp.c (sim_open): Delete call to STATE_WATCHPOINTS.
  46
  47 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
  48
  49         * configure: Regenerate.
  50
  51 2021-01-30  Mike Frysinger  <vapier@gentoo.org>
  52
  53         * interp.c (sim_open): Delete STATE_WATCHPOINTS (sd)->sizeof_pc.
  54
  55 2021-01-11  Mike Frysinger  <vapier@gentoo.org>
  56
  57         * config.in, configure: Regenerate.
  58         * interp.c, op_utils.c: Delete HAVE_STRING_H, HAVE_STRINGS_H,
  59         HAVE_STDLIB_H, HAVE_TIME_H, and strings.h include.
  60
  61 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
  62
  63         * configure: Regenerate.
  64
  65 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
  66
  67         * configure.ac (SIM_AC_OPTION_WARNINGS): Pass "no".
  68         * configure: Regenerate.
  69
  70 2021-01-08  Mike Frysinger  <vapier@gentoo.org>
  71
  72         * configure: Regenerate.
  73
  74 2021-01-04  Mike Frysinger  <vapier@gentoo.org>
  75
  76         * configure: Regenerate.
  77
  78 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
  79
  80         * configure: Regenerate.
  81
  82 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  83
  84         * config.in, configure: Regenerate.
  85
  86 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  87
  88         * configure: Regenerate.
  89
  90 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  91
  92         * configure: Regenerate.
  93
  94 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  95
  96         * configure: Regenerate.
  97
  98 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  99
 100         * configure: Regenerate.
 101
 102 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 103
 104         * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
 105         * configure: Regenerate.
 106
 107 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 108
 109         * configure: Regenerate.
 110
 111 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 112
 113         * configure: Regenerate.
 114
 115 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 116
 117         * config.in, configure: Regenerate.
 118
 119 2016-01-06  Mike Frysinger  <vapier@gentoo.org>
 120
 121         * interp.c (sim_open): Mark argv const.
 122         (sim_create_inferior): Mark argv and env const.
 123
 124 2016-01-04  Mike Frysinger  <vapier@gentoo.org>
 125
 126         * configure: Regenerate.
 127
 128 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 129
 130         * interp.c (sim_open): Update sim_parse_args comment.
 131
 132 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 133
 134         * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
 135         * configure: Regenerate.
 136
 137 2016-01-02  Mike Frysinger  <vapier@gentoo.org>
 138
 139         * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
 140         LITTLE.
 141         * configure: Regenerate.
 142
 143 2015-12-30  Mike Frysinger  <vapier@gentoo.org>
 144
 145         * wrapper.c (mn10300_reg_store, mn10300_reg_fetch): Define.
 146         (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
 147         (sim_store_register): Rename to ...
 148         (mn10300_reg_store): ... this.
 149         (sim_fetch_register): Rename to ...
 150         (mn10300_reg_fetch): ... this.
 151
 152 2015-12-27  Mike Frysinger  <vapier@gentoo.org>
 153
 154         * Makefile.in (MN10300_OBJS): Delete sim-hload.o.
 155
 156 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 157
 158         * config.in, configure: Regenerate.
 159
 160 2015-12-24  Mike Frysinger  <vapier@gentoo.org>
 161
 162         * sim-main.h (SIM_HANDLES_LMA): Delete.
 163
 164 2015-12-24  Mike Frysinger  <vapier@gentoo.org>
 165
 166         * sim-main.h (WITH_WATCHPOINTS): Delete.
 167
 168 2015-11-21  Mike Frysinger  <vapier@gentoo.org>
 169
 170         * interp.c (mn10300_callback): Delete.
 171         (sim_open): Delete mn10300_callback assignment.
 172         (program_interrupt): Call sim_io_printf.
 173         * mn10300_sim.h (mn10300_callback): Delete.
 174
 175 2015-11-17  Mike Frysinger  <vapier@gentoo.org>
 176
 177         * sim-main.h (WITH_CORE): Delete.
 178
 179 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
 180
 181         * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
 182
 183 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
 184
 185         * interp.c (sim_close): Delete.
 186
 187 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 188
 189         * configure: Regenerate.
 190
 191 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 192
 193         * op_utils.c (do_syscall): Replace call to cb_syscall with
 194         sim_syscall_multi.
 195
 196 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 197
 198         * mn10300_sim.h (syscall_read_mem, syscall_write_mem): Delete.
 199         * op_utils.c: Include sim-syscall.h.
 200         (syscall_read_mem, syscall_write_mem): Delete.
 201         (do_syscall): Change syscall_read_mem/syscall_write_mem
 202         to sim_syscall_read_mem/sim_syscall_write_mem.  Set syscall.p2.
 203
 204 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 205
 206         * configure: Regenerate.
 207
 208 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 209
 210         * configure: Regenerate.
 211
 212 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 213
 214         * interp.c (get_byte, get_half, get_word, put_byte, put_half,
 215         put_word): Delete.
 216         (sim_fetch_register): Inline put_word call.
 217         (sim_store_register): Inline get_word call.
 218         * mn10300_sim.h (struct _state): Delete mem member.
 219         (OP, Simops, get_byte, get_half, get_word, put_byte, put_half,
 220         put_word, map): Delete.
 221         * op_utils.c (MEMPTR): Delete.
 222
 223 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 224
 225         * interp.c (round_64, fpu_status_ok): Add static.
 226
 227 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 228
 229         * interp.c (mn10300_debug): Delete.
 230         * mn10300_sim.h (DEBUG_TRACE, DEBUG_VALUES, mn10300_debug): Delete.
 231         (struct _state): Delete exception and exited members.
 232         [_WIN32] (SIGTRAP, SIGQUIT): Delete.
 233         * op_utils.c (do_syscall): Call sim_engine_halt instead of setting
 234         State.exception.
 235
 236 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 237
 238         * mn10300_sim.h (uint8, int8, uint16, int16, uint32, int32): Typedef
 239         in terms of unsigned8, signed8, unsigned16, signed16, unsigned32,
 240         and signed32 respectively.
 241
 242 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 243
 244         * interp.c (INLINE): Delete define.
 245         * mn10300_sim.h (INLINE): Likewise.
 246
 247 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 248
 249         * sim-main.h (SIM_CPU): Delete.
 250
 251 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 252
 253         * sim-main.h (sim_cia): Delete.
 254         (SIM_ADDR): Delete comment.
 255
 256 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
 257
 258         * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Change CIA_GET to
 259         CPU_PC_GET and CIA_SET to CPU_PC_SET.
 260         * interp.c (sim_create_inferior): Change CIA_SET to CPU_PC_SET.
 261         (program_interrupt): Change CIA_GET to CPU_PC_GET and CIA_SET to
 262         CPU_PC_SET.
 263         (mn10300_cpu_exception_trigger): Change CIA_SET to CPU_PC_SET.
 264         (mn10300_cpu_exception_suspend): Likewise.
 265         (mn10300_cpu_exception_resume): Likewise.
 266         * sim-main.h (CIA_GET, CIA_SET): Delete.
 267
 268 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
 269
 270         * Makefile.in (MN10300_OBJS): Delete sim-cpu.o.
 271         * sim-main.h (STATE_CPU): Delete.
 272
 273 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
 274
 275         * configure: Regenerate.
 276
 277 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
 278
 279         * Makefile.in (MN10300_OBJS): Add sim-cpu.o.
 280         * interp.c (mn10300_pc_get, mn10300_pc_set): New functions.
 281         (sim_open): Declare new local var i.  Call sim_cpu_alloc_all.
 282         Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
 283         (sim_pc_get): Delete.
 284         * sim-main.h (null_cia, NULL_CIA): Delete.
 285         (SIM_CPU): Define.
 286         (struct sim_state): Change cpu to an array of pointers.
 287         (STATE_CPU): Drop & and handle WITH_SMP.
 288
 289 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
 290
 291         * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
 292
 293 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
 294
 295         * config.in, configure: Regenerate.
 296
 297 2015-03-24  Mike Frysinger  <vapier@gentoo.org>
 298
 299         * interp.c (sim_pc_get): New function.
 300
 301 2015-03-24  Mike Frysinger  <vapier@gentoo.org>
 302
 303         * configure: Regenerate.
 304
 305 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 306
 307         * Makefile.in (MN10300_OBJS): Delete dv-sockser.o.
 308
 309 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 310
 311         * configure: Regenerate.
 312
 313 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 314
 315         * configure: Regenerate.
 316
 317 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 318
 319         * configure: Regenerate.
 320
 321 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 322
 323         * configure: Regenerate.
 324         * configure.ac: Delete SIM_DV_SOCKSER_O check.
 325
 326 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 327
 328         * config.in, configure: Regenerate.
 329
 330 2015-03-15  Mike Frysinger  <vapier@gentoo.org>
 331
 332         * tconfig.in: Delete file.
 333
 334 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 335
 336         * Makefile.in (SIM_RUN_OBJS): Delete.
 337
 338 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 339
 340         * configure.ac (AC_CHECK_HEADERS): Delete unistd.h & stdlib.h &
 341         string.h & strings.h & time.h.
 342         * aclocal.m4, configure: Regenerate.
 343
 344 2014-08-19  Alan Modra  <amodra@gmail.com>
 345
 346         * configure: Regenerate.
 347
 348 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 349
 350         * configure: Regenerate.
 351         * config.in: Regenerate.
 352
 353 2014-03-04  Mike Frysinger  <vapier@gentoo.org>
 354
 355         * configure: Regenerate.
 356
 357 2013-09-23  Alan Modra  <amodra@gmail.com>
 358
 359         * configure: Regenerate.
 360
 361 2013-06-03  Mike Frysinger  <vapier@gentoo.org>
 362
 363         * aclocal.m4, configure: Regenerate.
 364
 365 2013-05-10  Freddie Chopin  <freddie_chopin@op.pl>
 366
 367         * configure: Rebuild.
 368
 369 2013-03-26  Mike Frysinger  <vapier@gentoo.org>
 370
 371         * configure: Regenerate.
 372
 373 2013-03-23  Joel Sherrill  <joel.sherrill@oarcorp.com>
 374
 375         * configure.ac: Fail if dv-sockser.o not available.
 376         Error when --disable-sim-hardware is specified.
 377         * tconfig.in: Conditionalize use of dv_sockser_install.
 378         * configure: Regenerated.
 379         * config.in: Regenerated.
 380
 381 2012-06-17  Hans-Peter Nilsson  <hp@axis.com>
 382
 383         * interp.c: Include config.h first.  Do not include sysdep.h.
 384
 385 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 386
 387         * config.in, configure: Regenerate.
 388
 389 2012-03-24  Mike Frysinger  <vapier@gentoo.org>
 390
 391         * aclocal.m4, config.in, configure: Regenerate.
 392
 393 2012-02-16  Kevin Buettner  <kevinb@redhat.com>
 394
 395         * interp.c (sim_fetch_register): Return length, not -1.
 396
 397 2012-01-02  Joel Brobecker  <brobecker@adacore.com>
 398
 399         * sim-main.h: Reformat copyright header.
 400
 401 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 402
 403         * aclocal.m4: New file.
 404         * configure: Regenerate.
 405
 406 2011-11-07  Mike Frysinger  <vapier@gentoo.org>
 407
 408         PR sim/9302
 409         * dv-mn103iop.c (write_dedicated_control_reg): Convert && to &.
 410
 411 2011-10-19  Mike Frysinger  <vapier@gentoo.org>
 412
 413         * configure: Regenerate after common/acinclude.m4 update.
 414
 415 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 416
 417         * configure.ac: Change include to common/acinclude.m4.
 418
 419 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 420
 421         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
 422         call.  Replace common.m4 include with SIM_AC_COMMON.
 423         * configure: Regenerate.
 424
 425 2011-07-05  Mike Frysinger  <vapier@gentoo.org>
 426
 427         * interp.c (sim_do_command): Delete.
 428
 429 2011-06-20  Nick Clifton  <nickc@redhat.com>
 430
 431         * am33.igen (sub Rm,Rn,Rd): Fix computation of carry flag.
 432
 433 2011-01-11  Andrew Burgess  <aburgess@broadcom.com>
 434
 435         * interp.c (sim_store_register): Update return value to
 436         match new API.
 437
 438 2010-04-19  Mike Frysinger  <vapier@gentoo.org>
 439
 440         * dv-mn103ser.c (sockser_addr, USE_SOCKSER_P): Delete
 441         (do_polling_event): Change USE_SOCKSER_P to dv_sockser_status.
 442         (read_status_reg): Likewise.
 443         (write_txb): Likewise.
 444
 445 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 446
 447         * configure: Regenerate.
 448
 449 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 450
 451         * config.in: Regenerate.
 452         * configure: Likewise.
 453
 454         * configure: Regenerate.
 455
 456 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 457
 458         * configure: Regenerate to track ../common/common.m4 changes.
 459         * config.in: Ditto.
 460
 461 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 462             Daniel Jacobowitz  <dan@codesourcery.com>
 463             Joseph Myers  <joseph@codesourcery.com>
 464
 465         * configure: Regenerate.
 466
 467 2006-12-21  Hans-Peter Nilsson  <hp@axis.com>
 468
 469         * acconfig.h: Remove.
 470         * config.in: Regenerate.
 471
 472 2006-06-13  Richard Earnshaw  <rearnsha@arm.com>
 473
 474         * configure: Regenerated.
 475
 476 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 477
 478         * configure: Regenerated.
 479
 480 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 481
 482         * configure: Regenerated.
 483
 484 2006-03-29  Hans-Peter Nilsson  <hp@axis.com>
 485
 486         * configure: Regenerate.
 487
 488 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 489
 490         * configure: Regenerate.
 491
 492 2005-01-14  Andrew Cagney  <cagney@gnu.org>
 493
 494         * configure.ac: Sinclude aclocal.m4 before common.m4.  Add
 495         explicit call to AC_CONFIG_HEADER.
 496         * configure: Regenerate.
 497
 498 2005-01-12  Andrew Cagney  <cagney@gnu.org>
 499
 500         * configure.ac: Update to use ../common/common.m4.
 501         * configure: Re-generate.
 502
 503 2005-01-11  Andrew Cagney  <cagney@localhost.localdomain>
 504
 505         * configure: Regenerated to track ../common/aclocal.m4 changes.
 506
 507 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 508
 509         * configure.ac: Rename configure.in, require autoconf 2.59.
 510         * configure: Re-generate.
 511
 512 2004-12-08  Hans-Peter Nilsson  <hp@axis.com>
 513
 514         * configure: Regenerate for ../common/aclocal.m4 update.
 515
 516 2004-06-26  Alexandre Oliva  <aoliva@redhat.com>
 517
 518         2000-08-07  Graham Stott  <grahams@cygnus.co.uk>
 519         * am33-2.igen (fmadd, fmsub, fmnadd, fmnsub): Correct typo.
 520         2000-05-29  Alexandre Oliva  <aoliva@cygnus.com>
 521         * interp.c (fpu_disabled_exception, fpu_unimp_exception,
 522         fpu_check_signal_exception): Take additional state arguments.
 523         Print exception type and call program_interrupt.  Adjust callers.
 524         (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
 525         fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Take additional
 526         arguments.
 527         * mn10300_sim.h (fpu_disabled_exception, fpu_unimp_exception,
 528         fpu_check_signal_exception): Adjust prototypes.
 529         (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
 530         fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Likewise.
 531         * am33-2.igen: Adjust calls.
 532         2000-05-19  Alexandre Oliva  <aoliva@cygnus.com>
 533         * op_utils.c (cmp2fcc): Moved...
 534         * interp.c: ... here.
 535         2000-05-18  Alexandre Oliva  <aoliva@cygnus.com>
 536         * am33-2.igen: Use `unsigned32', `signed32', `unsigned64' or
 537         `signed64' where type width is relevant.
 538         2000-05-15  Alexandre Oliva  <aoliva@cygnus.com>
 539         * mn10300_sim.h: Include sim-fpu.h.
 540         (FD2FPU, FPU2FD): Enclose the FD argument in parentheses.
 541         (fpu_check_signal_exception): Declare.
 542         (struct fp_prec_t, fp_single_prec, fp_double_prec): Likewise.
 543         (FP_SINGLE, FP_DOUBLE): Shorthands for fp_*_prec.
 544         (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
 545         fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Declare.
 546         * interp.c (fpu_disabled_exception): Document.
 547         (fpu_unimp_exception): Likewise.
 548         (fpu_check_signal_exception): Define.
 549         (reg2val_32, round_32, val2reg_32, fp_single_prec): Likewise.
 550         (reg2val_64, round_64, val2reg_64, fp_double_prec): Likewise.
 551         (REG2VAL, ROUND, VAL2REG): Define shorthands.
 552         (fpu_status_ok): Define.
 553         (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
 554         fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Define.
 555         * am33-2.igen (frsqrt, fcmp, fadd, fsub, fmul, fdiv,
 556         fmadd, fmsub, fnmadd, fnmsub): Use new functions.
 557         2000-04-27  Alexandre Oliva  <aoliva@cygnus.com>
 558         * interp.c (sim_create_inferior): Set PSW bit to enable FP insns
 559         if architecture is AM33/2.0.
 560         * am33.igen: Include am33-2.igen.
 561         2000-04-23  Alexandre Oliva  <aoliva@cygnus.com>
 562         * mn10300.igen (movm, call, ret, retf): Check for am33_2 too.
 563         * am33.igen (movm): Likewise.
 564         2000-04-19  Alexandre Oliva  <aoliva@cygnus.com>
 565         * am33.igen: Added `*am33_2' to some instructions that were
 566         missing it.
 567         2000-04-07  Alexandre Oliva  <aoliva@cygnus.com>
 568         * am33-2.igen: New file.  All insns implemented, but FP flags are
 569         only set for fcmp, exceptional conditions are not handled yet.
 570         * Makefile.in (IGEN_INSN): Added am33-2.igen.
 571         (tmp-igen): Added -M am33_2.
 572         * mn10300.igen, am33.igen: Added `*am33_2' to all insns.
 573         * gencode.c: Support FMT_D3.
 574         * mn10300_sim.h (dword): New type.
 575         (struct _state): Added fpregs.
 576         (REG_FPCR, FPCR): New define.  All assorted bitmaps.
 577         (XS2FS, AS2FS, Xf2FD): New macros.
 578         (FS2FPU, FD2FPU, FPU2FS, FPU2FD): Likewise.
 579         (load_dword, store_dword): New functions or macros.
 580         (u642dw, dw2u64): New functions.
 581         (fpu_disabled_exception, fpu_unimp_exception): Declared.
 582         * interp.c (fpu_disabled_exception): Defined; no actual
 583         implementation.
 584         (fpu_unimp_exception): Likewise.
 585         * op_utils.c (cmp2fcc): New function.
 586
 587         * interp.c, mn10300_sim.h, op_utils.c: Convert function prototypes
 588         and definitions to ISO C.
 589
 590         * gencode.c, simops.c: Delete.
 591         * Makefile.in: Remove non-COMMON dependencies and commands.
 592
 593         * configure.in: Use common simulator always.  Don't subst sim_gen
 594         nor mn10300_common.
 595         * configure: Rebuilt.
 596         * Makefile.in (WITHOUT_COMMON_OBJS, WITHOUT_COMMON_INTERP_DEP,
 597         WITHOUT_COMMON_RUN_OBJS): Remove.
 598         (WITH_COMMON_OBJS): Rename to MN10300_OBJS.
 599         (WITH_COMMON_INTERP_DEP): Rename to MN10300_INTERP_DEP.
 600         (WITH_COMMON_RUN_OBJS): Rename to SIM_RUN_OBJS.
 601         (SIM_EXTRA_CFLAGS): Don't use @sim_gen@.
 602         * interp.c: Remove non-common bits.
 603         * mn10300_sim.h: Likewise.
 604
 605 2003-08-28  Andrew Cagney  <cagney@redhat.com>
 606
 607         * dv-mn103ser.c (do_polling_event): Change type of "serial_reg" to
 608         "long".
 609         (read_status_reg): Cast "serial_reg" to "long".
 610         * dv-mn103tim.c (do_counter_event): Change type of "timer_nr" to
 611         "long".
 612         (do_counter6_event, write_mode_reg, write_tm6md): Ditto.
 613
 614 2003-02-27  Andrew Cagney  <cagney@redhat.com>
 615
 616         * interp.c (sim_open, sim_create_inferior, sim_open)
 617         (sim_create_inferior): Rename _bfd to bfd.
 618
 619 2003-02-26  Andrew Cagney  <cagney@redhat.com>
 620
 621         * am33.igen: Call sim_engine_abort instead of abort.
 622
 623 2003-02-26  David Carlton  <carlton@math.stanford.edu>
 624
 625         * dv-mn103tim.c (read_special_timer6_reg): Add break after
 626         empty default: label.
 627         (write_special_timer6_reg): Ditto.
 628         Update copyright.
 629
 630 2002-11-28  Andrew Cagney  <cagney@redhat.com>
 631
 632         * sim-main.h: Only include "idecode.h" once.
 633         * Makefile.in (SIM_EXTRA_DEPS): Define.
 634
 635 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 636
 637         * configure: Regenerated to track ../common/aclocal.m4 changes.
 638
 639 2002-06-09  Andrew Cagney  <cagney@redhat.com>
 640
 641         * Makefile.in (INCLUDE): Update path to callback.h.
 642         * mn10300_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
 643         * tconfig.in: Ditto.
 644
 645 2001-05-06  Jim Blandy  <jimb@redhat.com>
 646
 647         * mn10300.igen: Doc fixes.
 648
 649 2001-04-26  Alexandre Oliva  <aoliva@redhat.com>
 650
 651         * Makefile.in (idecode.o, op_utils.o, semantics.o, simops.o):
 652         Depend on targ-vals.h.
 653
 654 2001-04-15  J.T. Conklin  <jtc@redback.com>
 655
 656         * Makefile.in (simops.o): Add simops.h to dependency list.
 657
 658 Wed Aug  9 02:24:53 2000  Graham Stott  <grahams@cygnus.co.uk>
 659
 660         * am33.igen: Warning clean-up.
 661         (movm): Initialize PC and mask.
 662         (mov, movbu, movhu): Set srcreg2 from RI0.
 663         (bsch): Initialize c.
 664         (sat16_cmp): Actually do the comparison.
 665         (mov_llt): Do not overwrite dstreg with uninitialized variable.
 666
 667 Tue May 23 21:39:23 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 668
 669         * configure: Regenerated to track ../common/aclocal.m4 changes.
 670
 671 2000-05-22  Alexandre Oliva  <aoliva@cygnus.com>
 672
 673         * am33.igen: Fix leading comments of SP-relative offset insns that
 674         referred to other registers.  Make their offsets unsigned.
 675
 676 2000-05-18  Alexandre Oliva  <aoliva@cygnus.com>
 677
 678         * mn10300_sim.h (genericAdd, genericSub, genericCmp, genericOr,
 679         genericXor, genericBtst): Use `unsigned32'.
 680         * op_utils.c: Likewise.
 681         * mn10300.igen, am33.igen: Use `unsigned32', `signed32',
 682         `unsigned64' or `signed64' where type width is relevant.
 683
 684 2000-04-25  Alexandre Oliva  <aoliva@cygnus.com>
 685
 686         * am33.igen (inc4 Rn): Use genericAdd so as to modify flags.
 687
 688 2000-04-09  Alexandre Oliva  <aoliva@cygnus.com>
 689
 690         * am33.igen: Make SP-relative offsets unsigned.  Add `*am33' for
 691         some instructions that were missing it.
 692
 693 2000-03-03  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
 694
 695         * Makefile.in (IGEN_INSN): Added am33.igen.
 696
 697 Thu Sep  2 18:15:53 1999  Andrew Cagney  <cagney@b1.cygnus.com>
 698
 699         * configure: Regenerated to track ../common/aclocal.m4 changes.
 700
 701 Tue Jul 13 13:26:20 1999  Andrew Cagney  <cagney@b1.cygnus.com>
 702
 703         * interp.c: Clarify error message reporting an unknown board.
 704
 705 1999-05-08  Felix Lee  <flee@cygnus.com>
 706
 707         * configure: Regenerated to track ../common/aclocal.m4 changes.
 708
 709 1999-04-16  Frank Ch. Eigler  <fche@cygnus.com>
 710
 711         * interp.c (program_interrupt): Detect undesired recursion using
 712         static flag.  Set NMIRC register's SYSEF flag during
 713         --board=stdeval1 mode.
 714         * dv-mn103-int.c (write_icr): Add backdoor address to allow CPU to
 715         set SYSEF flag.
 716
 717 1999-04-02  Keith Seitz  <keiths@cygnus.com>
 718
 719         * Makefile.in (SIM_EXTRA_CFLAGS): Define a POLL_QUIT_INTERVAL
 720         for use in the simulator so that the poll_quit callback is
 721         not called too often.
 722
 723 Tue Mar  9 21:26:41 1999  Andrew Cagney  <cagney@b1.cygnus.com>
 724
 725         * dv-mn103int.c (mn103int_ioctl): Return something.
 726         * dv-mn103tim.c (write_tm6md): GCC suggested parentheses around &&
 727         within ||.
 728
 729 Tue Feb 16 23:57:17 1999  Jeffrey A Law  (law@cygnus.com)
 730
 731         * mn10300.igen (retf): Fix return address computation and store
 732         the new pc value into nia.
 733
 734 1998-12-29  Frank Ch. Eigler  <fche@cygnus.com>
 735
 736         * Makefile.in (WITH_COMMON_OBJS): Build also dv-sockser.o.
 737         * interp.c (sim_open): Add stub mn103002 cache control memory regions.
 738         Set OPERATING_ENVIRONMENT on "stdeval1" board.
 739         (mn10300_core_signal): New function to intercept memory errors.
 740         (program_interrupt): New function to dispatch to exception vector
 741         (mn10300_exception_*): New functions to snapshot pre/post exception
 742         state.
 743         * sim-main.h (SIM_CORE_SIGNAL): Define hook - call mn10300_core_signal.
 744         (SIM_ENGINE_HALT_HOOK): Do nothing.
 745         (SIM_CPU_EXCEPTION*): Define hooks to call mn10300_cpu_exception*().
 746         (_sim_cpu): Add exc_* fields to store register value snapshots.
 747         * dv-mn103ser.c (*): Support dv-sockser backend for UART I/O.
 748         Various endianness and warning fixes.
 749         * mn10300.igen (illegal): Call program_interrupt on error.
 750         (break): Call program_interrupt on breakpoint
 751
 752         Several changes from <janczyn@cygnus.com> and <cagney@cygnus.com>
 753         merged in:
 754         * dv-mn103int.c (mn103int_ioctl): New function for NMI
 755         generation. (mn103int_finish): Install it as ioctl handler.
 756         * dv-mn103tim.c: Support timer 6 specially.  Endianness fixes.
 757
 758 Wed Oct 14 12:11:05 1998  Jeffrey A Law  (law@cygnus.com)
 759
 760         * am33.igen: Allow autoincrement stores using the same register
 761         for source and destination operands.
 762
 763 Mon Aug 31 10:19:55 1998  Jeffrey A Law  (law@cygnus.com)
 764
 765         * am33.igen: Reverse HI/LO outputs of 4 operand "mul" and "mulu".
 766
 767 Fri Aug 28 14:40:49 1998  Joyce Janczyn  <janczyn@cygnus.com>
 768
 769         * interp.c (sim_open): Check for invalid --board option, fix
 770         indentation, allocate memory for mem control and DMA regs.
 771
 772 Wed Aug 26 09:29:38 1998  Joyce Janczyn  <janczyn@cygnus.com>
 773
 774         * mn10300.igen (div,divu): Fix divide instructions so divide by 0
 775         behaves like the hardware.
 776
 777 Mon Aug 24 11:50:09 1998  Joyce Janczyn  <janczyn@cygnus.com>
 778
 779         * sim-main.h (SIM_HANDLES_LMA): Define SIM_HANDLES_LMA.
 780
 781 Wed Aug 12 12:36:07 1998  Jeffrey A Law  (law@cygnus.com)
 782
 783         * am33.igen: Handle case where first DSP operation modifies a
 784         register used in the second DSP operation correctly.
 785
 786 Tue Jul 28 10:10:25 1998  Jeffrey A Law  (law@cygnus.com)
 787
 788         * am33.igen: Detect cases where two operands must not match for
 789         DSP instructions too.
 790
 791 Mon Jul 27 12:04:17 1998  Jeffrey A Law  (law@cygnus.com)
 792
 793         * am33.igen: Detect cases where two operands must not match in
 794         non-DSP instructions.
 795
 796 Fri Jul 24 18:15:21 1998  Joyce Janczyn  <janczyn@cygnus.com>
 797
 798         * op_utils.c (do_syscall): Rewrite to use common/syscall.c.
 799         (syscall_read_mem, syscall_write_mem): New functions for syscall
 800         callbacks.
 801         * mn10300_sim.h: Add prototypes for syscall_read_mem and
 802         syscall_write_mem.
 803         * mn10300.igen: Change C++ style comments to C style comments.
 804         Check for divide by zero in div and divu ops.
 805
 806 Fri Jul 24 12:49:28 1998  Jeffrey A Law  (law@cygnus.com)
 807
 808         * am33.igen (translate_xreg): New function.  Use it as needed.
 809
 810 Thu Jul 23 10:05:28 1998  Jeffrey A Law  (law@cygnus.com)
 811
 812         * am33.igen: Add some missing instructions.
 813
 814         * am33.igen: Autoincrement loads/store fixes.
 815
 816 Tue Jul 21 09:48:14 1998  Jeffrey A Law  (law@cygnus.com)
 817
 818         * am33.igen: Add mov_lCC DSP instructions.
 819
 820         * am33.igen: Add most am33 DSP instructions.
 821
 822 Thu Jul  9 10:06:55 1998  Jeffrey A Law  (law@cygnus.com)
 823
 824         * mn10300.igen: Fix Z bit for addc and subc instructions.
 825         Minor fixes in multiply/divide patterns.
 826
 827         * am33.igen: Add missing mul[u] imm32,Rn.  Fix condition code
 828         handling for many instructions.  Fix sign extension for some
 829         24bit immediates.
 830
 831         * am33.igen: Fix Z bit for remaining addc/subc instructions.
 832         Do not sign extend immediate for mov imm,XRn.
 833         More random mul, mac & div fixes.
 834         Remove some unused variables.
 835         Sign extend 24bit displacement in memory addresses.
 836
 837         * am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn.  Various
 838         fixes to 2 register multiply, divide and mac instructions.  Set
 839         Z,N correctly for sat16.  Sign extend 24 bit immediate for add,
 840         and sub instructions.
 841
 842         * am33.igen: Add remaining non-DSP instructions.
 843
 844 Wed Jul  8 16:29:12 1998  Jeffrey A Law  (law@cygnus.com)
 845
 846         * am33.igen (translate_rreg): New function.  Use it as appropriate.
 847
 848         * am33.igen: More am33 instructions.  Fix "div".
 849
 850 Mon Jul  6 15:39:22 1998  Jeffrey A Law  (law@cygnus.com)
 851
 852         * mn10300.igen: Add am33 support.
 853
 854         * Makefile.in: Use multi-sim to support both a mn10300 and am33
 855         simulator.
 856
 857         * am33.igen: Add many more am33 instructions.
 858
 859 Wed Jul  1 17:07:09 1998  Jeffrey A Law  (law@cygnus.com)
 860
 861         * mn10300_sim.h (FETCH24): Define.
 862
 863         * mn10300_sim.h: Add defines for some registers found on the AM33.
 864         * am33.igen: New file with some am33 support.
 865
 866 Tue Jun 30 11:23:20 1998  Jeffrey A Law  (law@cygnus.com)
 867
 868         * mn10300_sim.h: Include bfd.h
 869         (struct state): Add more room for processor specific registers.
 870         (REG_E0): Define.
 871
 872 Thu Jun 25 10:12:03 1998  Joyce Janczyn  <janczyn@cygnus.com>
 873
 874         * dv-mn103tim.c: Include sim-assert.h
 875         * dv-mn103ser.c (do_polling_event): Check for incoming data on
 876         serial line and schedule next polling event.
 877         (read_status_reg): schedule events to check for incoming data on
 878         serial line and issue interrupt if necessary.
 879
 880 Fri Jun 19 16:47:27 1998  Joyce Janczyn  <janczyn@cygnus.com>
 881
 882         * interp.c (sim_open): hook up serial 1 and 2 ports properly (typo).
 883
 884 Fri Jun 19 11:59:26 1998  Joyce Janczyn  <janczyn@cygnus.com>
 885
 886         * interp.c (board): Rename am32 to stdeval1 as this is the name
 887         consistently used to refer to the mn1030002 board.
 888
 889 Thu June 18 14:37:14 1998  Joyce Janczyn  <janczyn@cygnus.com>
 890         * interp.c (sim_open): Fix typo in address of EXTMD register
 891         (0x34000280, not 0x3400280).
 892
 893 Wed Jun 17 18:00:18 1998  Jeffrey A Law  (law@cygnus.com)
 894
 895         * simops.c (syscall): Handle change in opcode # for syscall.
 896         * mn10300.igen (syscall): Likewise.
 897
 898 Tue June 16 09:36:21 1998  Joyce Janczyn  <janczyn@cygnus.com>
 899         * dv-mn103int.c (mn103int_finish): Regular interrupts (not NMI or
 900         reset) are not enabled on reset.
 901
 902 Sun June 14 17:04:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 903         * dv-mn103iop.c (write_*_reg): Check for attempt to write r/o
 904         register bits.
 905         * dv-mn103ser.c: Fill in methods for reading and writing to serial
 906         device registers.
 907         * interp.c (sim_open): Make the serial device a polling device.
 908
 909 Fri June 12 16:24:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 910         * dv-mn103iop.c: New file for handling am32 io ports.
 911         * configure.in: Add mn103iop to hw_device list.
 912         * configure: Re-generate.
 913         * interp.c (sim_open): Create io port device.
 914
 915 Wed June 10 14:34:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 916         * dv-mn103int.c (external_group): Use enumerated types to access
 917         correct group addresses.
 918         * dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
 919         triggers an interrupt on the higher-numbered timer's port.
 920
 921 Mon June 8 13:30:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 922         * interp.c: (mn10300_option_handler): New function parses arguments
 923         using sim-options.
 924         * (board): Add --board option for specifying am32.
 925         * (sim_open): Create new timer and serial devices and control
 926         configuration of other am32 devices via board option.
 927         * dv-mn103tim.c, dv-mn103ser.c: New files for timers and serial devices.
 928         * dv-mn103cpu.c: Fix typos in opening comments.
 929         * dv-mn103int.c: Adjust interrupt controller settings for am32 instead of am30.
 930         * configure.in: Add mn103tim and mn103ser to hw_device list.
 931         * configure: Re-generate.
 932
 933 Mon May 25 20:50:35 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 934
 935         * dv-mn103int.c, dv-mn103cpu.c: Rename *_callback to *_method.
 936
 937         * dv-mn103cpu.c, dv-mn103int.c: Include hw-main.h and
 938         sim-main.h. Declare a struct hw_descriptor instead of struct
 939         hw_device_descriptor.
 940
 941 Mon May 25 17:33:33 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 942
 943         * dv-mn103cpu.c (struct mn103cpu): Change type of pending_handler
 944         to struct hw_event.
 945
 946 Fri May 22 12:17:41 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 947
 948         * configure.in (SIM_AC_OPTION_HARDWARE): Add argument "yes".
 949
 950 Wed May  6 13:29:06 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 951
 952         * interp.c (sim_open): Create a polling PAL device.
 953
 954 Fri May  1 16:39:15 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 955
 956         * dv-mn103int.c (mn103int_port_event):
 957         (mn103int_port_event):
 958         (mn103int_io_read_buffer):
 959         (mn103int_io_write_buffer):
 960
 961         * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Drop CPU/CIA args.
 962         (mn103cpu_port_event): Ditto.
 963         (mn103cpu_io_read_buffer): Ditto.
 964         (mn103cpu_io_write_buffer): Ditto.
 965
 966 Tue Apr 28 18:33:31 1998  Geoffrey Noer  <noer@cygnus.com>
 967
 968         * configure: Regenerated to track ../common/aclocal.m4 changes.
 969
 970 Sun Apr 26 15:31:55 1998  Tom Tromey  <tromey@creche>
 971
 972         * configure: Regenerated to track ../common/aclocal.m4 changes.
 973         * config.in: Ditto.
 974
 975 Sun Apr 26 15:19:55 1998  Tom Tromey  <tromey@cygnus.com>
 976
 977         * acconfig.h: New file.
 978         * configure.in: Reverted change of Apr 24; use sinclude again.
 979
 980 Fri Apr 24 14:16:40 1998  Tom Tromey  <tromey@creche>
 981
 982         * configure: Regenerated to track ../common/aclocal.m4 changes.
 983         * config.in: Ditto.
 984
 985 Fri Apr 24 11:19:07 1998  Tom Tromey  <tromey@cygnus.com>
 986
 987         * configure.in: Don't call sinclude.
 988
 989 Tue Apr 14 10:03:02 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 990
 991         * mn10300_sim.h: Declare all functions in op_utils.c using
 992         INLINE_SIM_MAIN.
 993         * op_utils.c: Ditto.
 994         * sim-main.c: New file.  Include op_utils.c.
 995
 996         * mn10300.igen (mov, cmp): Use new igen operators `!' and `=' to
 997         differentiate between MOV/CMP immediate/register instructions.
 998
 999         * configure.in (SIM_AC_OPTION_INLINE): Add and enable.
1000         * configure: Regenerate.
1001
1002 Sat Apr  4 20:36:25 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1003
1004         * configure: Regenerated to track ../common/aclocal.m4 changes.
1005
1006 Fri Mar 27 16:15:52 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1007
1008         * interp.c (hw): Delete variable, moved to SIM_DESC.
1009         (sim_open): Delete calls to hw_tree_create, hw_tree_finish.
1010         Handled by sim-module.
1011         (sim_open): Do not anotate tree with trace properties, handled by
1012         sim-hw.c
1013         (sim_open): Call sim_hw_parse instead of hw_tree_parse.
1014
1015         * configure: Regenerated to track ../common/aclocal.m4 changes.
1016
1017 Thu Mar 26 20:46:18 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1018
1019         * dv-mn103cpu.c (deliver_mn103cpu_interrupt):  Save the entire PC
1020         on the stack when delivering interrupts (not just the lower
1021         half)...
1022         * mn10300.igen (mov (Di,Am),Dn):  Fix decode.  Registers were
1023         specified in the wrong order.
1024
1025 Fri Mar 27 00:56:40 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1026
1027         * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Stop loss of
1028         succeeding interrupts, clear pending_handler when the handler
1029         isn't re-scheduled.
1030
1031 Thu Mar 26 10:11:01 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1032
1033         * Makefile.in (tmp-igen):  Prefix all usage of move-if-change
1034         script with $(SHELL) to make NT native builds happy.
1035         * configure:  Regenerate because of change to ../common/aclocal.m4.
1036
1037 Thu Mar 26 11:22:31 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1038
1039         * configure.in: Make --enable-sim-common the default.
1040         * configure: Re-generate.
1041
1042         * sim-main.h (CIA_GET, CIA_SET): Save/restore current instruction
1043         address into Sate.regs[REG_PC] instead of common struct.
1044
1045 Wed Mar 25 17:42:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1046
1047         * mn10300.igen (cmp imm8,An): Do not sign extend imm8 value.
1048
1049 Wed Mar 25 12:08:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1050
1051         * simops.c (OP_F0FD): Initialise variable 'sp'.
1052
1053 Thu Mar 26 00:21:32 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1054
1055         * dv-mn103int.c (decode_group): A group register every 4 bytes not
1056         8.
1057         (write_icr): Rewrite equation updating request field.
1058         (read_iagr): Fix check that interrupt is still pending.
1059
1060 Wed Mar 25 16:14:50 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1061
1062         * interp.c (sim_open): Tidy up device creation.
1063
1064         * dv-mn103int.c (mn103int_port_event): Drive NMI with non-zero
1065         value.
1066         (mn103int_io_read_buffer): Convert absolute address to register
1067         block offsets.
1068         (read_icr, write_icr): Convert block offset into group offset.
1069
1070 Wed Mar 25 15:08:49 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1071
1072         * interp.c (sim_open): Create second 1mb memory region at
1073         0x40000000.
1074         (sim_open): Create a device tree.
1075         (sim-hw.h): Include.
1076         (do_interrupt): Delete, needs to use dv-mn103cpu.c
1077
1078         * dv-mn103int.c, dv-mn103cpu.c: New files.
1079
1080 Wed Mar 25 08:47:38 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1081
1082         * mn10300_sim.h (EXTRACT_PSW_LM, INSERT_PSW_LM, PSW_IE, PSW_LM):
1083         Define.
1084         (SP): Define.
1085
1086 Wed Mar 25 12:35:29 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1087
1088         * configure: Regenerated to track ../common/aclocal.m4 changes.
1089
1090 Wed Mar 25 10:24:48 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1091
1092         * interp.c (sim-options.h): Include.
1093         (sim_kind, myname): Declare when not using common framework.
1094
1095         * mn10300_sim.h (do_syscall, generic*): Provide prototypes for
1096         functions found in op_utils.c
1097
1098         * mn10300.igen (add): Discard unused variables.
1099
1100         * configure, config.in: Re-generate with autoconf 2.12.1.
1101
1102 Tue Mar 24 15:27:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1103
1104         Add support for --enable-sim-common option.
1105         * Makefile.in (WITHOUT_COMMON_OBJS): Files included if
1106         ! --enable-sim-common
1107         (WITH_COMMON_OBJS): Files included if --enable-sim-common.
1108         (MN10300_OBJS,MN10300_INTERP_DEP): New variables.
1109         (SIM_OBJS): Rewrite.
1110         ({WITHOUT,WITH}_COMMON_RUN_OBJS,SIM_RUN_OBJS): New variables.
1111         (SIM_EXTRA_CFLAGS): New variable.
1112         (clean-extra): Clean up igen files.
1113         (../igen/igen,clean-igen,tmp-igen): New rules.
1114         * configure.in: Add support for common framework via
1115         --enable-sim-common.
1116         * configure: Regenerate.
1117         * interp.c: #include sim-main if WITH_COMMON, not mn10300_sim.h.
1118         (hash,dispatch,sim_size): Don't compile if ! WITH_COMMON.
1119         (init_system,sim_write,compare_simops): Likewise.
1120         (sim_set_profile,sim_set_profile_size): Likewise.
1121         (sim_stop,sim_resume,sim_trace,sim_info): Likewise.
1122         (sim_set_callbacks,sim_stop_reason,sim_read,sim_load): Likewise.
1123         (enum interrupt_type): New enum.
1124         (interrupt_names): New global.
1125         (do_interrupt): New function.
1126         (sim_open): Define differently if WITH_COMMON.
1127         (sim_close,sim_create_inferior,sim_do_command): Likewise.
1128         * mn10300_sim.h ({load,store}_{byte,half,word}): Define versions
1129         for WITH_COMMON.
1130         * mn10300.igen: New file.
1131         * mn10300.dc: New file.
1132         * op_utils.c: New file.
1133         * sim-main.h: New file.
1134
1135 Wed Mar 18 12:38:12 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1136
1137         * configure: Regenerated to track ../common/aclocal.m4 changes.
1138
1139 Fri Feb 27 18:36:04 1998  Jeffrey A Law  (law@cygnus.com)
1140
1141         * simops.c (inc): Fix typo.
1142
1143 Wed Feb 25 01:59:29 1998  Jeffrey A Law  (law@cygnus.com)
1144
1145         * simops.c (signed multiply instructions): Cast input operands to
1146         signed32 before casting them to signed64 so that the sign bit
1147         is propagated properly.
1148
1149 Mon Feb 23 20:23:19 1998  Mark Alexander  <marka@cygnus.com>
1150
1151         * Makefile.in: Last change was bad.  Define NL_TARGET
1152         so that targ-vals.h will be used instead of syscall.h.
1153         * simops.c: Use targ-vals.h instead of syscall.h.
1154         (OP_F020): Disable unsupported system calls.
1155
1156 Mon Feb 23 09:44:38 1998  Mark Alexander  <marka@cygnus.com>
1157
1158         * Makefile.in: Get header files from libgloss/mn10300/sys.
1159
1160 Sun Feb 22 16:02:24 1998  Jeffrey A Law  (law@cygnus.com)
1161
1162         * simops.c: Include sim-types.h.
1163
1164 Wed Feb 18 13:07:08 1998  Jeffrey A Law  (law@cygnus.com)
1165
1166         * simops.c (multiply instructions): Cast input operands to a
1167         signed64/unsigned64 type as appropriate.
1168
1169 Tue Feb 17 12:47:16 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1170
1171         * interp.c (sim_store_register, sim_fetch_register): Pass in
1172         length parameter.  Return -1.
1173
1174 Sun Feb  1 16:47:51 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1175
1176         * configure: Regenerated to track ../common/aclocal.m4 changes.
1177
1178 Sat Jan 31 18:15:41 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1179
1180         * configure: Regenerated to track ../common/aclocal.m4 changes.
1181
1182 Mon Jan 19 22:26:29 1998  Doug Evans  <devans@seba>
1183
1184         * configure: Regenerated to track ../common/aclocal.m4 changes.
1185
1186 Mon Dec 15 23:17:11 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1187
1188         * configure: Regenerated to track ../common/aclocal.m4 changes.
1189         * config.in: Ditto.
1190
1191 Thu Dec  4 09:21:05 1997  Doug Evans  <devans@canuck.cygnus.com>
1192
1193         * configure: Regenerated to track ../common/aclocal.m4 changes.
1194
1195 Tue Nov 11 10:38:52 1997  Jeffrey A Law  (law@cygnus.com)
1196
1197         * simops.c (call:16 call:32): Stack adjustment is determined solely
1198         by the imm8 field.
1199
1200 Wed Oct 22 14:43:00 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1201
1202         * interp.c (sim_load): Pass lma_p and sim_write args to
1203         sim_load_file.
1204
1205 Tue Oct 21 10:12:03 1997  Jeffrey A Law  (law@cygnus.com)
1206
1207         * simops.c: Correctly handle register restores for "ret" and "retf"
1208         instructions.
1209
1210 Fri Oct  3 09:28:00 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1211
1212         * configure: Regenerated to track ../common/aclocal.m4 changes.
1213
1214 Wed Sep 24 17:38:57 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1215
1216         * configure: Regenerated to track ../common/aclocal.m4 changes.
1217
1218 Tue Sep 23 11:04:38 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1219
1220         * configure: Regenerated to track ../common/aclocal.m4 changes.
1221
1222 Mon Sep 22 11:46:20 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1223
1224         * configure: Regenerated to track ../common/aclocal.m4 changes.
1225
1226 Fri Sep 19 17:45:25 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1227
1228         * configure: Regenerated to track ../common/aclocal.m4 changes.
1229
1230 Mon Sep 15 17:36:15 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1231
1232         * configure: Regenerated to track ../common/aclocal.m4 changes.
1233
1234 Thu Sep  4 17:21:23 1997  Doug Evans  <dje@seba>
1235
1236         * configure: Regenerated to track ../common/aclocal.m4 changes.
1237
1238 Wed Aug 27 18:13:22 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1239
1240         * configure: Regenerated to track ../common/aclocal.m4 changes.
1241         * config.in: Ditto.
1242
1243 Tue Aug 26 10:41:07 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1244
1245         * interp.c (sim_kill): Delete.
1246         (sim_create_inferior): Add ABFD argument.
1247         (sim_load): Move setting of PC from here.
1248         (sim_create_inferior): To here.
1249
1250 Mon Aug 25 17:50:22 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1251
1252         * configure: Regenerated to track ../common/aclocal.m4 changes.
1253         * config.in: Ditto.
1254
1255 Mon Aug 25 16:14:44 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1256
1257         * interp.c (sim_open): Add ABFD argument.
1258
1259 Tue Jun 24 13:46:20 1997  Jeffrey A Law  (law@cygnus.com)
1260
1261         * interp.c (sim_resume): Clear State.exited.
1262         (sim_stop_reason): If State.exited is nonzero, then indicate that
1263         the simulator exited instead of stopped.
1264         * mn10300_sim.h (struct _state): Add exited field.
1265         * simops.c (syscall): Set State.exited for SYS_exit.
1266
1267 Wed Jun 11 22:07:56 1997  Jeffrey A Law  (law@cygnus.com)
1268
1269         * simops.c: Fix thinko in last change.
1270
1271 Tue Jun 10 12:31:32 1997  Jeffrey A Law  (law@cygnus.com)
1272
1273         * simops.c: "call" stores the callee saved registers into the
1274         stack!  Update the stack pointer properly when done with
1275         register saves.
1276
1277         * simops.c: Fix return address computation for "call" instructions.
1278
1279 Thu May 22 01:43:11 1997  Jeffrey A Law  (law@cygnus.com)
1280
1281         * interp.c (sim_open): Fix typo.
1282
1283 Wed May 21 23:27:58 1997  Jeffrey A Law  (law@cygnus.com)
1284
1285         * interp.c (sim_resume): Add missing case in big switch
1286         statement (for extb instruction).
1287
1288 Tue May 20 17:51:30 1997  Jeffrey A Law  (law@cygnus.com)
1289
1290         * interp.c: Replace all references to load_mem and store_mem
1291         with references to load_byte, load_half, load_3_byte, load_word
1292         and store_byte, store_half, store_3_byte, store_word.
1293         (INLINE): Delete definition.
1294         (load_mem_big): Likewise.
1295         (max_mem): Make it global.
1296         (dispatch): Make this function inline.
1297         (load_mem, store_mem): Delete functions.
1298         * mn10300_sim.h (INLINE): Define.
1299         (RLW): Delete unused definition.
1300         (load_mem, store_mem): Delete declarations.
1301         (load_mem_big): New definition.
1302         (load_byte, load_half, load_3_byte, load_word): New functions.
1303         (store_byte, store_half, store_3_byte, store_word): New functions.
1304         * simops.c:  Replace all references to load_mem and store_mem
1305         with references to load_byte, load_half, load_3_byte, load_word
1306         and store_byte, store_half, store_3_byte, store_word.
1307
1308 Tue May 20 10:21:51 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1309
1310         * interp.c (sim_open): Add callback to arguments.
1311         (sim_set_callbacks): Delete SIM_DESC argument.
1312
1313 Mon May 19 13:54:22 1997  Jeffrey A Law  (law@cygnus.com)
1314
1315         * interp.c (dispatch): Make this an inline function.
1316
1317         * simops.c (syscall): Use callback->write regardless of
1318         what file descriptor we're writing too.
1319
1320 Sun May 18 16:46:31 1997  Jeffrey A Law  (law@cygnus.com)
1321
1322         * interp.c (load_mem_big): Remove function.  It's now a macro
1323         defined elsewhere.
1324         (compare_simops): New function.
1325         (sim_open): Sort the Simops table before inserting entries
1326         into the hash table.
1327         * mn10300_sim.h: Remove unused #defines.
1328         (load_mem_big): Define.
1329
1330 Fri May 16 16:36:17 1997  Jeffrey A Law  (law@cygnus.com)
1331
1332         * interp.c (load_mem): If we get a load from an out of range
1333         address, abort.
1334         (store_mem): Likewise for stores.
1335         (max_mem): New variable.
1336
1337 Tue May  6 13:24:36 1997  Jeffrey A Law  (law@cygnus.com)
1338
1339         * mn10300_sim.h: Fix ordering of bits in the PSW.
1340
1341         * interp.c: Improve hashing routine to avoid long list
1342         traversals for common instructions.  Add HASH_STAT support.
1343         Rewrite opcode dispatch code using a big switch instead of
1344         cascaded if/else statements.  Avoid useless calls to load_mem.
1345
1346 Mon May  5 18:07:48 1997  Jeffrey A Law  (law@cygnus.com)
1347
1348         * mn10300_sim.h (struct _state): Add space for mdrq register.
1349         (REG_MDRQ): Define.
1350         * simops.c: Don't abort for trap.  Add support for the extended
1351         instructions, "getx", "putx", "mulq", "mulqu", "sat16", "sat24",
1352         and "bsch".
1353
1354 Thu Apr 24 00:39:51 1997  Doug Evans  <dje@canuck.cygnus.com>
1355
1356         * configure: Regenerated to track ../common/aclocal.m4 changes.
1357
1358 Fri Apr 18 14:04:04 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1359
1360         * interp.c (sim_stop): Add stub function.
1361
1362 Thu Apr 17 03:26:59 1997  Doug Evans  <dje@canuck.cygnus.com>
1363
1364         * Makefile.in (SIM_OBJS): Add sim-load.o.
1365         * interp.c (sim_kind, myname): New static locals.
1366         (sim_open): Set sim_kind, myname.  Ignore -E arg.
1367         (sim_load): Return SIM_RC.  New arg abfd.  Call sim_load_file to
1368         load file into simulator.  Set start address from bfd.
1369         (sim_create_inferior): Return SIM_RC.  Delete arg start_address.
1370
1371 Wed Apr 16 19:30:44 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1372
1373         * simops.c (OP_F020): SYS_execv, SYS_time, SYS_times, SYS_utime
1374         only include if implemented by host.
1375         (OP_F020): Typecast arg passed to time function;
1376
1377 Mon Apr  7 23:57:49 1997  Jeffrey A Law  (law@cygnus.com)
1378
1379         * simops.c (syscall): Handle new mn10300 calling conventions.
1380
1381 Mon Apr  7 15:45:02 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1382
1383         * configure: Regenerated to track ../common/aclocal.m4 changes.
1384         * config.in: Ditto.
1385
1386 Fri Apr  4 20:02:37 1997  Ian Lance Taylor  <ian@cygnus.com>
1387
1388         * Makefile.in: Change mn10300-opc.o to m10300-opc.o, to match
1389         corresponding change in opcodes directory.
1390
1391 Wed Apr  2 15:06:28 1997  Doug Evans  <dje@canuck.cygnus.com>
1392
1393         * interp.c (sim_open): New arg `kind'.
1394
1395         * configure: Regenerated to track ../common/aclocal.m4 changes.
1396
1397 Wed Apr  2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1398
1399         * configure: Regenerated to track ../common/aclocal.m4 changes.
1400
1401 Thu Mar 20 11:58:02 1997  Jeffrey A Law  (law@cygnus.com)
1402
1403         * simops.c: Fix register extraction for a two "movbu" variants.
1404         Somewhat simplify "sub" instructions.
1405         Correctly sign extend operands for "mul".  Put the correct
1406         half of the result in MDR for "mul" and "mulu".
1407         Implement remaining instructions.
1408         Tweak opcode for "syscall".
1409
1410 Tue Mar 18 14:21:21 1997  Jeffrey A Law  (law@cygnus.com)
1411
1412         * simops.c: Do syscall emulation in "syscall" instruction.  Add
1413         dummy "trap" instruction.
1414
1415 Wed Mar 19 01:14:00 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1416
1417         * configure: Regenerated to track ../common/aclocal.m4 changes.
1418
1419 Mon Mar 17 15:10:07 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1420
1421         * configure: Re-generate.
1422
1423 Fri Mar 14 10:34:11 1997  Michael Meissner  <meissner@cygnus.com>
1424
1425         * configure: Regenerate to track ../common/aclocal.m4 changes.
1426
1427 Thu Mar 13 12:54:45 1997  Doug Evans  <dje@canuck.cygnus.com>
1428
1429         * interp.c (sim_open): New SIM_DESC result.  Argument is now
1430         in argv form.
1431         (other sim_*): New SIM_DESC argument.
1432
1433 Wed Mar 12 15:04:00 1997  Jeffrey A Law  (law@cygnus.com)
1434
1435         * simops.c: Fix carry bit computation for "add" instructions.
1436
1437         * simops.c: Fix typos in bset insns.  Fix arguments to store_mem
1438         for bset imm8,(d8,an) and bclr imm8,(d8,an).
1439
1440 Wed Mar  5 15:00:10 1997  Jeffrey A Law  (law@cygnus.com)
1441
1442         * simops.c: Fix register references when computing Z and N bits
1443         for lsr imm8,dn.
1444
1445 Tue Feb  4 13:33:30 1997  Doug Evans  <dje@canuck.cygnus.com>
1446
1447         * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1448         COMMON_{PRE,POST}_CONFIG_FRAG instead.
1449         * configure.in: sinclude ../common/aclocal.m4.
1450         * configure: Regenerated.
1451
1452 Fri Jan 24 10:47:25 1997  Jeffrey A Law  (law@cygnus.com)
1453
1454         * interp.c (init_system): Allocate 2^19 bytes of space for the
1455         simulator.
1456
1457 Thu Jan 23 11:46:23 1997  Stu Grossman  (grossman@critters.cygnus.com)
1458
1459         * configure configure.in Makefile.in:  Update to new configure
1460         scheme which is more compatible with WinGDB builds.
1461         * configure.in:  Improve comment on how to run autoconf.
1462         * configure:  Re-run autoconf to get new ../common/aclocal.m4.
1463         * Makefile.in:  Use autoconf substitution to install common
1464         makefile fragment.
1465
1466 Tue Jan 21 15:03:04 1997  Jeffrey A Law  (law@cygnus.com)
1467
1468         * simops.c: Undo last change to "rol" and "ror", original code
1469         was correct!
1470
1471 Thu Jan 16 11:28:14 1997  Jeffrey A Law  (law@cygnus.com)
1472
1473         * simops.c: Fix "rol" and "ror".
1474
1475 Wed Jan 15 06:45:58 1997  Jeffrey A Law  (law@cygnus.com)
1476
1477         * simops.c: Fix typo in last change.
1478
1479 Mon Jan 13 13:22:35 1997  Jeffrey A Law  (law@cygnus.com)
1480
1481         * simops.c: Use REG macros in few places not using them yet.
1482
1483 Mon Jan  6 16:21:19 1997  Jeffrey A Law  (law@cygnus.com)
1484
1485         * mn10300_sim.h (struct _state): Fix number of registers!
1486
1487 Tue Dec 31 16:20:41 1996  Jeffrey A Law  (law@cygnus.com)
1488
1489         * mn10300_sim.h (struct _state): Put all registers into a single
1490         array to make gdb implementation easier.
1491         (REG_*): Add definitions for all registers in the state array.
1492         (SEXT32, SEXT40, SEXT44, SEXT60): Remove unused macros.
1493         * simops.c: Related changes.
1494
1495 Wed Dec 18 10:10:45 1996  Jeffrey A Law  (law@cygnus.com)
1496
1497         * interp.c (sim_resume): Handle 0xff as a single byte insn.
1498
1499         * simops.c: Fix overflow computation for "add" and "inc"
1500         instructions.
1501
1502 Mon Dec 16 10:03:52 1996  Jeffrey A Law  (law@cygnus.com)
1503
1504         * simops.c: Handle "break" instruction.
1505
1506         * simops.c: Fix restoring the PC for "ret" and "retf" instructions.
1507
1508 Wed Dec 11 09:53:10 1996  Jeffrey A Law  (law@cygnus.com)
1509
1510         * gencode.c (write_opcodes): Also write out the format of the
1511         opcode.
1512         * mn10300_sim.h (simops): Add "format" field.
1513         * interp.c (sim_resume): Deal with endianness issues here.
1514
1515 Tue Dec 10 15:05:37 1996  Jeffrey A Law  (law@cygnus.com)
1516
1517         * simops.c (REG0_4): Define.
1518         Use REG0_4 for indexed loads/stores.
1519
1520 Sat Dec  7 09:50:28 1996  Jeffrey A Law  (law@cygnus.com)
1521
1522         * simops.c (REG0_16): Fix typo.
1523
1524 Fri Dec  6 14:13:34 1996  Jeffrey A Law  (law@cygnus.com)
1525
1526         * simops.c: Call abort for any instruction that's not currently
1527         simulated.
1528
1529         * simops.c: Define accessor macros to extract register
1530         values from instructions.  Use them consistently.
1531
1532         * interp.c: Delete unused global variable "OP".
1533         (sim_resume): Remove unused variable "opcode".
1534         * simops.c: Fix some uninitialized variable problems, add
1535         parens to fix various -Wall warnings.
1536
1537         * gencode.c (write_header): Add "insn" and "extension" arguments
1538         to the OP_* declarations.
1539         (write_template): Similarly for function templates.
1540         * interp.c (insn, extension): Remove global variables.  Instead
1541         pass them as arguments to the OP_* functions.
1542         * mn10300_sim.h: Remove decls for "insn" and "extension".
1543         * simops.c (OP_*): Accept "insn" and "extension" as arguments
1544         instead of using globals.
1545
1546 Thu Dec  5 22:26:31 1996  Jeffrey A Law  (law@cygnus.com)
1547
1548         * simops.c: Fix typos in "mov am,(d16,an)" and "mov am,(d32,an)"
1549
1550         * simops.c: Fix thinkos in last change to "inc dn".
1551
1552 Wed Dec  4 10:57:53 1996  Jeffrey A Law  (law@cygnus.com)
1553
1554         * simops.c: "add imm,sp" does not effect the condition codes.
1555         "inc dn" does effect the condition codes.
1556
1557 Tue Dec  3 17:37:45 1996  Jeffrey A Law  (law@cygnus.com)
1558
1559         * simops.c: Treat both operands as signed values for
1560         "div" instruction.
1561
1562         * simops.c: Fix simulation of division instructions.
1563         Fix typos/thinkos in several "cmp" and "sub" instructions.
1564
1565 Mon Dec  2 12:31:40 1996  Jeffrey A Law  (law@cygnus.com)
1566
1567         * simops.c: Fix carry bit handling in "sub" and "cmp"
1568         instructions.
1569
1570         * simops.c: Fix "mov imm8,an" and "mov imm16,dn".
1571
1572 Sun Dec  1 16:05:42 1996  Jeffrey A Law  (law@cygnus.com)
1573
1574         * simops.c: Fix overflow computation for many instructions.
1575
1576         * simops.c: Fix "mov dm, an", "movbu dm, (an)", and "movhu dm, (an)".
1577
1578         * simops.c: Fix "mov am, dn".
1579
1580         * simops.c: Fix more bugs in "add imm,an" and
1581         "add imm,dn".
1582
1583 Wed Nov 27 09:20:42 1996  Jeffrey A Law  (law@cygnus.com)
1584
1585         * simops.c: Fix bugs in "movm" and "add imm,an".
1586
1587         * simops.c: Don't lose the upper 24 bits of the return
1588         pointer in "call" and "calls" instructions.  Rough cut
1589         at emulated system calls.
1590
1591         * simops.c: Implement the remaining 5, 6 and 7 byte instructions.
1592
1593         * simops.c: Implement remaining 4 byte instructions.
1594
1595         * simops.c: Implement remaining 3 byte instructions.
1596
1597         * simops.c: Implement remaining 2 byte instructions.  Call
1598         abort for instructions we're not implementing now.
1599
1600 Tue Nov 26 15:43:41 1996  Jeffrey A Law  (law@cygnus.com)
1601
1602         * simops.c: Implement lots of random instructions.
1603
1604         * simops.c: Implement "movm" and "bCC" insns.
1605
1606         * mn10300_sim.h (_state): Add another register (MDR).
1607         (REG_MDR): Define.
1608         * simops.c: Implement "cmp", "calls", "rets", "jmp" and
1609         a few additional random insns.
1610
1611         * mn10300_sim.h (PSW_*): Define for CC status tracking.
1612         (REG_D0, REG_A0, REG_SP): Define.
1613         * simops.c: Implement "add", "addc" and a few other random
1614         instructions.
1615
1616         * gencode.c, interp.c: Snapshot current simulator code.
1617
1618 Mon Nov 25 12:46:38 1996  Jeffrey A Law  (law@cygnus.com)
1619
1620         * Makefile.in, config.in, configure, configure.in: New files.
1621         * gencode.c, interp.c, mn10300_sim.h, simops.c: New files.