1 2021-04-26 Mike Frysinger <vapier@gentoo.org>
3 * Makefile.in (NL_TARGET): Delete.
5 2021-04-23 Mike Frysinger <vapier@gentoo.org>
7 * configure.ac (SIM_AC_OPTION_HARDWARE): Delete first two args.
8 * configure: Regenerate.
10 2021-04-22 Tom Tromey <tom@tromey.com>
12 * configure, config.in: Rebuild.
14 2021-04-22 Tom Tromey <tom@tromey.com>
16 * Makefile.in (INCLUDE): Remove.
18 2021-04-22 Tom Tromey <tom@tromey.com>
20 * Makefile.in (interp.o): Remove.
21 (idecode.o op_utils.o semantics.o): Remove.
23 2021-04-22 Tom Tromey <tom@tromey.com>
27 2021-04-21 Mike Frysinger <vapier@gentoo.org>
29 * aclocal.m4: Regenerate.
31 2021-04-21 Simon Marchi <simon.marchi@polymtl.ca>
33 * configure: Regenerate.
35 2021-04-18 Mike Frysinger <vapier@gentoo.org>
37 * configure: Regenerate.
39 2021-04-18 Mike Frysinger <vapier@gentoo.org>
41 * configure.ac: Delete AC_CHECK_FUNCS & AC_CHECK_HEADERS calls.
42 * op_utils.c: Delete utime.h include.
43 * config.in, configure: Regenerate.
45 2021-04-15 John Baldwin <jhb@FreeBSD.org>
47 * Makefile.in: (tmp-igen) Only pass mn10300.igen to igen.
48 * mn10300.igen: Include am33-2.igen.
50 2021-04-12 Mike Frysinger <vapier@gentoo.org>
52 * interp.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all.
54 2021-04-08 Simon Marchi <simon.marchi@polymtl.ca>
56 * Makefile.in: Set ASAN_OPTIONS when running igen.
58 2021-04-02 Mike Frysinger <vapier@gentoo.org>
60 * Makefile.in (../igen/igen): Delete rule.
61 (tmp-igen): Delete ../igen make.
63 2021-04-02 Mike Frysinger <vapier@gentoo.org>
65 * aclocal.m4, configure: Regenerate.
67 2021-02-28 Mike Frysinger <vapier@gentoo.org>
69 * configure: Regenerate.
71 2021-02-21 Mike Frysinger <vapier@gentoo.org>
73 * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
74 * aclocal.m4, configure: Regenerate.
76 2021-02-13 Mike Frysinger <vapier@gentoo.org>
78 * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
79 * aclocal.m4, configure: Regenerate.
81 2021-02-06 Mike Frysinger <vapier@gentoo.org>
83 * interp.c (sim_open): Delete call to STATE_WATCHPOINTS.
85 2021-02-06 Mike Frysinger <vapier@gentoo.org>
87 * configure: Regenerate.
89 2021-01-30 Mike Frysinger <vapier@gentoo.org>
91 * interp.c (sim_open): Delete STATE_WATCHPOINTS (sd)->sizeof_pc.
93 2021-01-11 Mike Frysinger <vapier@gentoo.org>
95 * config.in, configure: Regenerate.
96 * interp.c, op_utils.c: Delete HAVE_STRING_H, HAVE_STRINGS_H,
97 HAVE_STDLIB_H, HAVE_TIME_H, and strings.h include.
99 2021-01-09 Mike Frysinger <vapier@gentoo.org>
101 * configure: Regenerate.
103 2021-01-09 Mike Frysinger <vapier@gentoo.org>
105 * configure.ac (SIM_AC_OPTION_WARNINGS): Pass "no".
106 * configure: Regenerate.
108 2021-01-08 Mike Frysinger <vapier@gentoo.org>
110 * configure: Regenerate.
112 2021-01-04 Mike Frysinger <vapier@gentoo.org>
114 * configure: Regenerate.
116 2017-09-06 John Baldwin <jhb@FreeBSD.org>
118 * configure: Regenerate.
120 2016-01-10 Mike Frysinger <vapier@gentoo.org>
122 * config.in, configure: Regenerate.
124 2016-01-10 Mike Frysinger <vapier@gentoo.org>
126 * configure: Regenerate.
128 2016-01-10 Mike Frysinger <vapier@gentoo.org>
130 * configure: Regenerate.
132 2016-01-10 Mike Frysinger <vapier@gentoo.org>
134 * configure: Regenerate.
136 2016-01-10 Mike Frysinger <vapier@gentoo.org>
138 * configure: Regenerate.
140 2016-01-10 Mike Frysinger <vapier@gentoo.org>
142 * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
143 * configure: Regenerate.
145 2016-01-10 Mike Frysinger <vapier@gentoo.org>
147 * configure: Regenerate.
149 2016-01-10 Mike Frysinger <vapier@gentoo.org>
151 * configure: Regenerate.
153 2016-01-09 Mike Frysinger <vapier@gentoo.org>
155 * config.in, configure: Regenerate.
157 2016-01-06 Mike Frysinger <vapier@gentoo.org>
159 * interp.c (sim_open): Mark argv const.
160 (sim_create_inferior): Mark argv and env const.
162 2016-01-04 Mike Frysinger <vapier@gentoo.org>
164 * configure: Regenerate.
166 2016-01-03 Mike Frysinger <vapier@gentoo.org>
168 * interp.c (sim_open): Update sim_parse_args comment.
170 2016-01-03 Mike Frysinger <vapier@gentoo.org>
172 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
173 * configure: Regenerate.
175 2016-01-02 Mike Frysinger <vapier@gentoo.org>
177 * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
179 * configure: Regenerate.
181 2015-12-30 Mike Frysinger <vapier@gentoo.org>
183 * wrapper.c (mn10300_reg_store, mn10300_reg_fetch): Define.
184 (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
185 (sim_store_register): Rename to ...
186 (mn10300_reg_store): ... this.
187 (sim_fetch_register): Rename to ...
188 (mn10300_reg_fetch): ... this.
190 2015-12-27 Mike Frysinger <vapier@gentoo.org>
192 * Makefile.in (MN10300_OBJS): Delete sim-hload.o.
194 2015-12-26 Mike Frysinger <vapier@gentoo.org>
196 * config.in, configure: Regenerate.
198 2015-12-24 Mike Frysinger <vapier@gentoo.org>
200 * sim-main.h (SIM_HANDLES_LMA): Delete.
202 2015-12-24 Mike Frysinger <vapier@gentoo.org>
204 * sim-main.h (WITH_WATCHPOINTS): Delete.
206 2015-11-21 Mike Frysinger <vapier@gentoo.org>
208 * interp.c (mn10300_callback): Delete.
209 (sim_open): Delete mn10300_callback assignment.
210 (program_interrupt): Call sim_io_printf.
211 * mn10300_sim.h (mn10300_callback): Delete.
213 2015-11-17 Mike Frysinger <vapier@gentoo.org>
215 * sim-main.h (WITH_CORE): Delete.
217 2015-11-15 Mike Frysinger <vapier@gentoo.org>
219 * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
221 2015-11-14 Mike Frysinger <vapier@gentoo.org>
223 * interp.c (sim_close): Delete.
225 2015-06-23 Mike Frysinger <vapier@gentoo.org>
227 * configure: Regenerate.
229 2015-06-17 Mike Frysinger <vapier@gentoo.org>
231 * op_utils.c (do_syscall): Replace call to cb_syscall with
234 2015-06-17 Mike Frysinger <vapier@gentoo.org>
236 * mn10300_sim.h (syscall_read_mem, syscall_write_mem): Delete.
237 * op_utils.c: Include sim-syscall.h.
238 (syscall_read_mem, syscall_write_mem): Delete.
239 (do_syscall): Change syscall_read_mem/syscall_write_mem
240 to sim_syscall_read_mem/sim_syscall_write_mem. Set syscall.p2.
242 2015-06-12 Mike Frysinger <vapier@gentoo.org>
244 * configure: Regenerate.
246 2015-06-12 Mike Frysinger <vapier@gentoo.org>
248 * configure: Regenerate.
250 2015-06-11 Mike Frysinger <vapier@gentoo.org>
252 * interp.c (get_byte, get_half, get_word, put_byte, put_half,
254 (sim_fetch_register): Inline put_word call.
255 (sim_store_register): Inline get_word call.
256 * mn10300_sim.h (struct _state): Delete mem member.
257 (OP, Simops, get_byte, get_half, get_word, put_byte, put_half,
258 put_word, map): Delete.
259 * op_utils.c (MEMPTR): Delete.
261 2015-06-11 Mike Frysinger <vapier@gentoo.org>
263 * interp.c (round_64, fpu_status_ok): Add static.
265 2015-06-11 Mike Frysinger <vapier@gentoo.org>
267 * interp.c (mn10300_debug): Delete.
268 * mn10300_sim.h (DEBUG_TRACE, DEBUG_VALUES, mn10300_debug): Delete.
269 (struct _state): Delete exception and exited members.
270 [_WIN32] (SIGTRAP, SIGQUIT): Delete.
271 * op_utils.c (do_syscall): Call sim_engine_halt instead of setting
274 2015-06-11 Mike Frysinger <vapier@gentoo.org>
276 * mn10300_sim.h (uint8, int8, uint16, int16, uint32, int32): Typedef
277 in terms of unsigned8, signed8, unsigned16, signed16, unsigned32,
278 and signed32 respectively.
280 2015-06-11 Mike Frysinger <vapier@gentoo.org>
282 * interp.c (INLINE): Delete define.
283 * mn10300_sim.h (INLINE): Likewise.
285 2015-04-18 Mike Frysinger <vapier@gentoo.org>
287 * sim-main.h (SIM_CPU): Delete.
289 2015-04-18 Mike Frysinger <vapier@gentoo.org>
291 * sim-main.h (sim_cia): Delete.
292 (SIM_ADDR): Delete comment.
294 2015-04-17 Mike Frysinger <vapier@gentoo.org>
296 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Change CIA_GET to
297 CPU_PC_GET and CIA_SET to CPU_PC_SET.
298 * interp.c (sim_create_inferior): Change CIA_SET to CPU_PC_SET.
299 (program_interrupt): Change CIA_GET to CPU_PC_GET and CIA_SET to
301 (mn10300_cpu_exception_trigger): Change CIA_SET to CPU_PC_SET.
302 (mn10300_cpu_exception_suspend): Likewise.
303 (mn10300_cpu_exception_resume): Likewise.
304 * sim-main.h (CIA_GET, CIA_SET): Delete.
306 2015-04-15 Mike Frysinger <vapier@gentoo.org>
308 * Makefile.in (MN10300_OBJS): Delete sim-cpu.o.
309 * sim-main.h (STATE_CPU): Delete.
311 2015-04-13 Mike Frysinger <vapier@gentoo.org>
313 * configure: Regenerate.
315 2015-04-13 Mike Frysinger <vapier@gentoo.org>
317 * Makefile.in (MN10300_OBJS): Add sim-cpu.o.
318 * interp.c (mn10300_pc_get, mn10300_pc_set): New functions.
319 (sim_open): Declare new local var i. Call sim_cpu_alloc_all.
320 Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
321 (sim_pc_get): Delete.
322 * sim-main.h (null_cia, NULL_CIA): Delete.
324 (struct sim_state): Change cpu to an array of pointers.
325 (STATE_CPU): Drop & and handle WITH_SMP.
327 2015-04-06 Mike Frysinger <vapier@gentoo.org>
329 * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
331 2015-03-31 Mike Frysinger <vapier@gentoo.org>
333 * config.in, configure: Regenerate.
335 2015-03-24 Mike Frysinger <vapier@gentoo.org>
337 * interp.c (sim_pc_get): New function.
339 2015-03-24 Mike Frysinger <vapier@gentoo.org>
341 * configure: Regenerate.
343 2015-03-23 Mike Frysinger <vapier@gentoo.org>
345 * Makefile.in (MN10300_OBJS): Delete dv-sockser.o.
347 2015-03-23 Mike Frysinger <vapier@gentoo.org>
349 * configure: Regenerate.
351 2015-03-23 Mike Frysinger <vapier@gentoo.org>
353 * configure: Regenerate.
355 2015-03-23 Mike Frysinger <vapier@gentoo.org>
357 * configure: Regenerate.
359 2015-03-23 Mike Frysinger <vapier@gentoo.org>
361 * configure: Regenerate.
362 * configure.ac: Delete SIM_DV_SOCKSER_O check.
364 2015-03-16 Mike Frysinger <vapier@gentoo.org>
366 * config.in, configure: Regenerate.
368 2015-03-15 Mike Frysinger <vapier@gentoo.org>
370 * tconfig.in: Delete file.
372 2015-03-14 Mike Frysinger <vapier@gentoo.org>
374 * Makefile.in (SIM_RUN_OBJS): Delete.
376 2015-03-14 Mike Frysinger <vapier@gentoo.org>
378 * configure.ac (AC_CHECK_HEADERS): Delete unistd.h & stdlib.h &
379 string.h & strings.h & time.h.
380 * aclocal.m4, configure: Regenerate.
382 2014-08-19 Alan Modra <amodra@gmail.com>
384 * configure: Regenerate.
386 2014-08-15 Roland McGrath <mcgrathr@google.com>
388 * configure: Regenerate.
389 * config.in: Regenerate.
391 2014-03-04 Mike Frysinger <vapier@gentoo.org>
393 * configure: Regenerate.
395 2013-09-23 Alan Modra <amodra@gmail.com>
397 * configure: Regenerate.
399 2013-06-03 Mike Frysinger <vapier@gentoo.org>
401 * aclocal.m4, configure: Regenerate.
403 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
405 * configure: Rebuild.
407 2013-03-26 Mike Frysinger <vapier@gentoo.org>
409 * configure: Regenerate.
411 2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
413 * configure.ac: Fail if dv-sockser.o not available.
414 Error when --disable-sim-hardware is specified.
415 * tconfig.in: Conditionalize use of dv_sockser_install.
416 * configure: Regenerated.
417 * config.in: Regenerated.
419 2012-06-17 Hans-Peter Nilsson <hp@axis.com>
421 * interp.c: Include config.h first. Do not include sysdep.h.
423 2012-06-15 Joel Brobecker <brobecker@adacore.com>
425 * config.in, configure: Regenerate.
427 2012-03-24 Mike Frysinger <vapier@gentoo.org>
429 * aclocal.m4, config.in, configure: Regenerate.
431 2012-02-16 Kevin Buettner <kevinb@redhat.com>
433 * interp.c (sim_fetch_register): Return length, not -1.
435 2012-01-02 Joel Brobecker <brobecker@adacore.com>
437 * sim-main.h: Reformat copyright header.
439 2011-12-03 Mike Frysinger <vapier@gentoo.org>
441 * aclocal.m4: New file.
442 * configure: Regenerate.
444 2011-11-07 Mike Frysinger <vapier@gentoo.org>
447 * dv-mn103iop.c (write_dedicated_control_reg): Convert && to &.
449 2011-10-19 Mike Frysinger <vapier@gentoo.org>
451 * configure: Regenerate after common/acinclude.m4 update.
453 2011-10-17 Mike Frysinger <vapier@gentoo.org>
455 * configure.ac: Change include to common/acinclude.m4.
457 2011-10-17 Mike Frysinger <vapier@gentoo.org>
459 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
460 call. Replace common.m4 include with SIM_AC_COMMON.
461 * configure: Regenerate.
463 2011-07-05 Mike Frysinger <vapier@gentoo.org>
465 * interp.c (sim_do_command): Delete.
467 2011-06-20 Nick Clifton <nickc@redhat.com>
469 * am33.igen (sub Rm,Rn,Rd): Fix computation of carry flag.
471 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
473 * interp.c (sim_store_register): Update return value to
476 2010-04-19 Mike Frysinger <vapier@gentoo.org>
478 * dv-mn103ser.c (sockser_addr, USE_SOCKSER_P): Delete
479 (do_polling_event): Change USE_SOCKSER_P to dv_sockser_status.
480 (read_status_reg): Likewise.
481 (write_txb): Likewise.
483 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
485 * configure: Regenerate.
487 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
489 * config.in: Regenerate.
490 * configure: Likewise.
492 * configure: Regenerate.
494 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
496 * configure: Regenerate to track ../common/common.m4 changes.
499 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
500 Daniel Jacobowitz <dan@codesourcery.com>
501 Joseph Myers <joseph@codesourcery.com>
503 * configure: Regenerate.
505 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
507 * acconfig.h: Remove.
508 * config.in: Regenerate.
510 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
512 * configure: Regenerated.
514 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
516 * configure: Regenerated.
518 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
520 * configure: Regenerated.
522 2006-03-29 Hans-Peter Nilsson <hp@axis.com>
524 * configure: Regenerate.
526 2005-03-23 Mark Kettenis <kettenis@gnu.org>
528 * configure: Regenerate.
530 2005-01-14 Andrew Cagney <cagney@gnu.org>
532 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
533 explicit call to AC_CONFIG_HEADER.
534 * configure: Regenerate.
536 2005-01-12 Andrew Cagney <cagney@gnu.org>
538 * configure.ac: Update to use ../common/common.m4.
539 * configure: Re-generate.
541 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
543 * configure: Regenerated to track ../common/aclocal.m4 changes.
545 2005-01-07 Andrew Cagney <cagney@gnu.org>
547 * configure.ac: Rename configure.in, require autoconf 2.59.
548 * configure: Re-generate.
550 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
552 * configure: Regenerate for ../common/aclocal.m4 update.
554 2004-06-26 Alexandre Oliva <aoliva@redhat.com>
556 2000-08-07 Graham Stott <grahams@cygnus.co.uk>
557 * am33-2.igen (fmadd, fmsub, fmnadd, fmnsub): Correct typo.
558 2000-05-29 Alexandre Oliva <aoliva@cygnus.com>
559 * interp.c (fpu_disabled_exception, fpu_unimp_exception,
560 fpu_check_signal_exception): Take additional state arguments.
561 Print exception type and call program_interrupt. Adjust callers.
562 (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
563 fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Take additional
565 * mn10300_sim.h (fpu_disabled_exception, fpu_unimp_exception,
566 fpu_check_signal_exception): Adjust prototypes.
567 (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
568 fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Likewise.
569 * am33-2.igen: Adjust calls.
570 2000-05-19 Alexandre Oliva <aoliva@cygnus.com>
571 * op_utils.c (cmp2fcc): Moved...
572 * interp.c: ... here.
573 2000-05-18 Alexandre Oliva <aoliva@cygnus.com>
574 * am33-2.igen: Use `unsigned32', `signed32', `unsigned64' or
575 `signed64' where type width is relevant.
576 2000-05-15 Alexandre Oliva <aoliva@cygnus.com>
577 * mn10300_sim.h: Include sim-fpu.h.
578 (FD2FPU, FPU2FD): Enclose the FD argument in parentheses.
579 (fpu_check_signal_exception): Declare.
580 (struct fp_prec_t, fp_single_prec, fp_double_prec): Likewise.
581 (FP_SINGLE, FP_DOUBLE): Shorthands for fp_*_prec.
582 (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
583 fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Declare.
584 * interp.c (fpu_disabled_exception): Document.
585 (fpu_unimp_exception): Likewise.
586 (fpu_check_signal_exception): Define.
587 (reg2val_32, round_32, val2reg_32, fp_single_prec): Likewise.
588 (reg2val_64, round_64, val2reg_64, fp_double_prec): Likewise.
589 (REG2VAL, ROUND, VAL2REG): Define shorthands.
590 (fpu_status_ok): Define.
591 (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
592 fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Define.
593 * am33-2.igen (frsqrt, fcmp, fadd, fsub, fmul, fdiv,
594 fmadd, fmsub, fnmadd, fnmsub): Use new functions.
595 2000-04-27 Alexandre Oliva <aoliva@cygnus.com>
596 * interp.c (sim_create_inferior): Set PSW bit to enable FP insns
597 if architecture is AM33/2.0.
598 * am33.igen: Include am33-2.igen.
599 2000-04-23 Alexandre Oliva <aoliva@cygnus.com>
600 * mn10300.igen (movm, call, ret, retf): Check for am33_2 too.
601 * am33.igen (movm): Likewise.
602 2000-04-19 Alexandre Oliva <aoliva@cygnus.com>
603 * am33.igen: Added `*am33_2' to some instructions that were
605 2000-04-07 Alexandre Oliva <aoliva@cygnus.com>
606 * am33-2.igen: New file. All insns implemented, but FP flags are
607 only set for fcmp, exceptional conditions are not handled yet.
608 * Makefile.in (IGEN_INSN): Added am33-2.igen.
609 (tmp-igen): Added -M am33_2.
610 * mn10300.igen, am33.igen: Added `*am33_2' to all insns.
611 * gencode.c: Support FMT_D3.
612 * mn10300_sim.h (dword): New type.
613 (struct _state): Added fpregs.
614 (REG_FPCR, FPCR): New define. All assorted bitmaps.
615 (XS2FS, AS2FS, Xf2FD): New macros.
616 (FS2FPU, FD2FPU, FPU2FS, FPU2FD): Likewise.
617 (load_dword, store_dword): New functions or macros.
618 (u642dw, dw2u64): New functions.
619 (fpu_disabled_exception, fpu_unimp_exception): Declared.
620 * interp.c (fpu_disabled_exception): Defined; no actual
622 (fpu_unimp_exception): Likewise.
623 * op_utils.c (cmp2fcc): New function.
625 * interp.c, mn10300_sim.h, op_utils.c: Convert function prototypes
626 and definitions to ISO C.
628 * gencode.c, simops.c: Delete.
629 * Makefile.in: Remove non-COMMON dependencies and commands.
631 * configure.in: Use common simulator always. Don't subst sim_gen
633 * configure: Rebuilt.
634 * Makefile.in (WITHOUT_COMMON_OBJS, WITHOUT_COMMON_INTERP_DEP,
635 WITHOUT_COMMON_RUN_OBJS): Remove.
636 (WITH_COMMON_OBJS): Rename to MN10300_OBJS.
637 (WITH_COMMON_INTERP_DEP): Rename to MN10300_INTERP_DEP.
638 (WITH_COMMON_RUN_OBJS): Rename to SIM_RUN_OBJS.
639 (SIM_EXTRA_CFLAGS): Don't use @sim_gen@.
640 * interp.c: Remove non-common bits.
641 * mn10300_sim.h: Likewise.
643 2003-08-28 Andrew Cagney <cagney@redhat.com>
645 * dv-mn103ser.c (do_polling_event): Change type of "serial_reg" to
647 (read_status_reg): Cast "serial_reg" to "long".
648 * dv-mn103tim.c (do_counter_event): Change type of "timer_nr" to
650 (do_counter6_event, write_mode_reg, write_tm6md): Ditto.
652 2003-02-27 Andrew Cagney <cagney@redhat.com>
654 * interp.c (sim_open, sim_create_inferior, sim_open)
655 (sim_create_inferior): Rename _bfd to bfd.
657 2003-02-26 Andrew Cagney <cagney@redhat.com>
659 * am33.igen: Call sim_engine_abort instead of abort.
661 2003-02-26 David Carlton <carlton@math.stanford.edu>
663 * dv-mn103tim.c (read_special_timer6_reg): Add break after
664 empty default: label.
665 (write_special_timer6_reg): Ditto.
668 2002-11-28 Andrew Cagney <cagney@redhat.com>
670 * sim-main.h: Only include "idecode.h" once.
671 * Makefile.in (SIM_EXTRA_DEPS): Define.
673 2002-06-16 Andrew Cagney <ac131313@redhat.com>
675 * configure: Regenerated to track ../common/aclocal.m4 changes.
677 2002-06-09 Andrew Cagney <cagney@redhat.com>
679 * Makefile.in (INCLUDE): Update path to callback.h.
680 * mn10300_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
683 2001-05-06 Jim Blandy <jimb@redhat.com>
685 * mn10300.igen: Doc fixes.
687 2001-04-26 Alexandre Oliva <aoliva@redhat.com>
689 * Makefile.in (idecode.o, op_utils.o, semantics.o, simops.o):
690 Depend on targ-vals.h.
692 2001-04-15 J.T. Conklin <jtc@redback.com>
694 * Makefile.in (simops.o): Add simops.h to dependency list.
696 Wed Aug 9 02:24:53 2000 Graham Stott <grahams@cygnus.co.uk>
698 * am33.igen: Warning clean-up.
699 (movm): Initialize PC and mask.
700 (mov, movbu, movhu): Set srcreg2 from RI0.
701 (bsch): Initialize c.
702 (sat16_cmp): Actually do the comparison.
703 (mov_llt): Do not overwrite dstreg with uninitialized variable.
705 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
707 * configure: Regenerated to track ../common/aclocal.m4 changes.
709 2000-05-22 Alexandre Oliva <aoliva@cygnus.com>
711 * am33.igen: Fix leading comments of SP-relative offset insns that
712 referred to other registers. Make their offsets unsigned.
714 2000-05-18 Alexandre Oliva <aoliva@cygnus.com>
716 * mn10300_sim.h (genericAdd, genericSub, genericCmp, genericOr,
717 genericXor, genericBtst): Use `unsigned32'.
718 * op_utils.c: Likewise.
719 * mn10300.igen, am33.igen: Use `unsigned32', `signed32',
720 `unsigned64' or `signed64' where type width is relevant.
722 2000-04-25 Alexandre Oliva <aoliva@cygnus.com>
724 * am33.igen (inc4 Rn): Use genericAdd so as to modify flags.
726 2000-04-09 Alexandre Oliva <aoliva@cygnus.com>
728 * am33.igen: Make SP-relative offsets unsigned. Add `*am33' for
729 some instructions that were missing it.
731 2000-03-03 Alexandre Oliva <oliva@lsd.ic.unicamp.br>
733 * Makefile.in (IGEN_INSN): Added am33.igen.
735 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
737 * configure: Regenerated to track ../common/aclocal.m4 changes.
739 Tue Jul 13 13:26:20 1999 Andrew Cagney <cagney@b1.cygnus.com>
741 * interp.c: Clarify error message reporting an unknown board.
743 1999-05-08 Felix Lee <flee@cygnus.com>
745 * configure: Regenerated to track ../common/aclocal.m4 changes.
747 1999-04-16 Frank Ch. Eigler <fche@cygnus.com>
749 * interp.c (program_interrupt): Detect undesired recursion using
750 static flag. Set NMIRC register's SYSEF flag during
751 --board=stdeval1 mode.
752 * dv-mn103-int.c (write_icr): Add backdoor address to allow CPU to
755 1999-04-02 Keith Seitz <keiths@cygnus.com>
757 * Makefile.in (SIM_EXTRA_CFLAGS): Define a POLL_QUIT_INTERVAL
758 for use in the simulator so that the poll_quit callback is
759 not called too often.
761 Tue Mar 9 21:26:41 1999 Andrew Cagney <cagney@b1.cygnus.com>
763 * dv-mn103int.c (mn103int_ioctl): Return something.
764 * dv-mn103tim.c (write_tm6md): GCC suggested parentheses around &&
767 Tue Feb 16 23:57:17 1999 Jeffrey A Law (law@cygnus.com)
769 * mn10300.igen (retf): Fix return address computation and store
770 the new pc value into nia.
772 1998-12-29 Frank Ch. Eigler <fche@cygnus.com>
774 * Makefile.in (WITH_COMMON_OBJS): Build also dv-sockser.o.
775 * interp.c (sim_open): Add stub mn103002 cache control memory regions.
776 Set OPERATING_ENVIRONMENT on "stdeval1" board.
777 (mn10300_core_signal): New function to intercept memory errors.
778 (program_interrupt): New function to dispatch to exception vector
779 (mn10300_exception_*): New functions to snapshot pre/post exception
781 * sim-main.h (SIM_CORE_SIGNAL): Define hook - call mn10300_core_signal.
782 (SIM_ENGINE_HALT_HOOK): Do nothing.
783 (SIM_CPU_EXCEPTION*): Define hooks to call mn10300_cpu_exception*().
784 (_sim_cpu): Add exc_* fields to store register value snapshots.
785 * dv-mn103ser.c (*): Support dv-sockser backend for UART I/O.
786 Various endianness and warning fixes.
787 * mn10300.igen (illegal): Call program_interrupt on error.
788 (break): Call program_interrupt on breakpoint
790 Several changes from <janczyn@cygnus.com> and <cagney@cygnus.com>
792 * dv-mn103int.c (mn103int_ioctl): New function for NMI
793 generation. (mn103int_finish): Install it as ioctl handler.
794 * dv-mn103tim.c: Support timer 6 specially. Endianness fixes.
796 Wed Oct 14 12:11:05 1998 Jeffrey A Law (law@cygnus.com)
798 * am33.igen: Allow autoincrement stores using the same register
799 for source and destination operands.
801 Mon Aug 31 10:19:55 1998 Jeffrey A Law (law@cygnus.com)
803 * am33.igen: Reverse HI/LO outputs of 4 operand "mul" and "mulu".
805 Fri Aug 28 14:40:49 1998 Joyce Janczyn <janczyn@cygnus.com>
807 * interp.c (sim_open): Check for invalid --board option, fix
808 indentation, allocate memory for mem control and DMA regs.
810 Wed Aug 26 09:29:38 1998 Joyce Janczyn <janczyn@cygnus.com>
812 * mn10300.igen (div,divu): Fix divide instructions so divide by 0
813 behaves like the hardware.
815 Mon Aug 24 11:50:09 1998 Joyce Janczyn <janczyn@cygnus.com>
817 * sim-main.h (SIM_HANDLES_LMA): Define SIM_HANDLES_LMA.
819 Wed Aug 12 12:36:07 1998 Jeffrey A Law (law@cygnus.com)
821 * am33.igen: Handle case where first DSP operation modifies a
822 register used in the second DSP operation correctly.
824 Tue Jul 28 10:10:25 1998 Jeffrey A Law (law@cygnus.com)
826 * am33.igen: Detect cases where two operands must not match for
827 DSP instructions too.
829 Mon Jul 27 12:04:17 1998 Jeffrey A Law (law@cygnus.com)
831 * am33.igen: Detect cases where two operands must not match in
832 non-DSP instructions.
834 Fri Jul 24 18:15:21 1998 Joyce Janczyn <janczyn@cygnus.com>
836 * op_utils.c (do_syscall): Rewrite to use common/syscall.c.
837 (syscall_read_mem, syscall_write_mem): New functions for syscall
839 * mn10300_sim.h: Add prototypes for syscall_read_mem and
841 * mn10300.igen: Change C++ style comments to C style comments.
842 Check for divide by zero in div and divu ops.
844 Fri Jul 24 12:49:28 1998 Jeffrey A Law (law@cygnus.com)
846 * am33.igen (translate_xreg): New function. Use it as needed.
848 Thu Jul 23 10:05:28 1998 Jeffrey A Law (law@cygnus.com)
850 * am33.igen: Add some missing instructions.
852 * am33.igen: Autoincrement loads/store fixes.
854 Tue Jul 21 09:48:14 1998 Jeffrey A Law (law@cygnus.com)
856 * am33.igen: Add mov_lCC DSP instructions.
858 * am33.igen: Add most am33 DSP instructions.
860 Thu Jul 9 10:06:55 1998 Jeffrey A Law (law@cygnus.com)
862 * mn10300.igen: Fix Z bit for addc and subc instructions.
863 Minor fixes in multiply/divide patterns.
865 * am33.igen: Add missing mul[u] imm32,Rn. Fix condition code
866 handling for many instructions. Fix sign extension for some
869 * am33.igen: Fix Z bit for remaining addc/subc instructions.
870 Do not sign extend immediate for mov imm,XRn.
871 More random mul, mac & div fixes.
872 Remove some unused variables.
873 Sign extend 24bit displacement in memory addresses.
875 * am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn. Various
876 fixes to 2 register multiply, divide and mac instructions. Set
877 Z,N correctly for sat16. Sign extend 24 bit immediate for add,
878 and sub instructions.
880 * am33.igen: Add remaining non-DSP instructions.
882 Wed Jul 8 16:29:12 1998 Jeffrey A Law (law@cygnus.com)
884 * am33.igen (translate_rreg): New function. Use it as appropriate.
886 * am33.igen: More am33 instructions. Fix "div".
888 Mon Jul 6 15:39:22 1998 Jeffrey A Law (law@cygnus.com)
890 * mn10300.igen: Add am33 support.
892 * Makefile.in: Use multi-sim to support both a mn10300 and am33
895 * am33.igen: Add many more am33 instructions.
897 Wed Jul 1 17:07:09 1998 Jeffrey A Law (law@cygnus.com)
899 * mn10300_sim.h (FETCH24): Define.
901 * mn10300_sim.h: Add defines for some registers found on the AM33.
902 * am33.igen: New file with some am33 support.
904 Tue Jun 30 11:23:20 1998 Jeffrey A Law (law@cygnus.com)
906 * mn10300_sim.h: Include bfd.h
907 (struct state): Add more room for processor specific registers.
910 Thu Jun 25 10:12:03 1998 Joyce Janczyn <janczyn@cygnus.com>
912 * dv-mn103tim.c: Include sim-assert.h
913 * dv-mn103ser.c (do_polling_event): Check for incoming data on
914 serial line and schedule next polling event.
915 (read_status_reg): schedule events to check for incoming data on
916 serial line and issue interrupt if necessary.
918 Fri Jun 19 16:47:27 1998 Joyce Janczyn <janczyn@cygnus.com>
920 * interp.c (sim_open): hook up serial 1 and 2 ports properly (typo).
922 Fri Jun 19 11:59:26 1998 Joyce Janczyn <janczyn@cygnus.com>
924 * interp.c (board): Rename am32 to stdeval1 as this is the name
925 consistently used to refer to the mn1030002 board.
927 Thu June 18 14:37:14 1998 Joyce Janczyn <janczyn@cygnus.com>
928 * interp.c (sim_open): Fix typo in address of EXTMD register
929 (0x34000280, not 0x3400280).
931 Wed Jun 17 18:00:18 1998 Jeffrey A Law (law@cygnus.com)
933 * simops.c (syscall): Handle change in opcode # for syscall.
934 * mn10300.igen (syscall): Likewise.
936 Tue June 16 09:36:21 1998 Joyce Janczyn <janczyn@cygnus.com>
937 * dv-mn103int.c (mn103int_finish): Regular interrupts (not NMI or
938 reset) are not enabled on reset.
940 Sun June 14 17:04:00 1998 Joyce Janczyn <janczyn@cygnus.com>
941 * dv-mn103iop.c (write_*_reg): Check for attempt to write r/o
943 * dv-mn103ser.c: Fill in methods for reading and writing to serial
945 * interp.c (sim_open): Make the serial device a polling device.
947 Fri June 12 16:24:00 1998 Joyce Janczyn <janczyn@cygnus.com>
948 * dv-mn103iop.c: New file for handling am32 io ports.
949 * configure.in: Add mn103iop to hw_device list.
950 * configure: Re-generate.
951 * interp.c (sim_open): Create io port device.
953 Wed June 10 14:34:00 1998 Joyce Janczyn <janczyn@cygnus.com>
954 * dv-mn103int.c (external_group): Use enumerated types to access
955 correct group addresses.
956 * dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
957 triggers an interrupt on the higher-numbered timer's port.
959 Mon June 8 13:30:00 1998 Joyce Janczyn <janczyn@cygnus.com>
960 * interp.c: (mn10300_option_handler): New function parses arguments
962 * (board): Add --board option for specifying am32.
963 * (sim_open): Create new timer and serial devices and control
964 configuration of other am32 devices via board option.
965 * dv-mn103tim.c, dv-mn103ser.c: New files for timers and serial devices.
966 * dv-mn103cpu.c: Fix typos in opening comments.
967 * dv-mn103int.c: Adjust interrupt controller settings for am32 instead of am30.
968 * configure.in: Add mn103tim and mn103ser to hw_device list.
969 * configure: Re-generate.
971 Mon May 25 20:50:35 1998 Andrew Cagney <cagney@b1.cygnus.com>
973 * dv-mn103int.c, dv-mn103cpu.c: Rename *_callback to *_method.
975 * dv-mn103cpu.c, dv-mn103int.c: Include hw-main.h and
976 sim-main.h. Declare a struct hw_descriptor instead of struct
977 hw_device_descriptor.
979 Mon May 25 17:33:33 1998 Andrew Cagney <cagney@b1.cygnus.com>
981 * dv-mn103cpu.c (struct mn103cpu): Change type of pending_handler
984 Fri May 22 12:17:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
986 * configure.in (SIM_AC_OPTION_HARDWARE): Add argument "yes".
988 Wed May 6 13:29:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
990 * interp.c (sim_open): Create a polling PAL device.
992 Fri May 1 16:39:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
994 * dv-mn103int.c (mn103int_port_event):
995 (mn103int_port_event):
996 (mn103int_io_read_buffer):
997 (mn103int_io_write_buffer):
999 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Drop CPU/CIA args.
1000 (mn103cpu_port_event): Ditto.
1001 (mn103cpu_io_read_buffer): Ditto.
1002 (mn103cpu_io_write_buffer): Ditto.
1004 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
1006 * configure: Regenerated to track ../common/aclocal.m4 changes.
1008 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
1010 * configure: Regenerated to track ../common/aclocal.m4 changes.
1013 Sun Apr 26 15:19:55 1998 Tom Tromey <tromey@cygnus.com>
1015 * acconfig.h: New file.
1016 * configure.in: Reverted change of Apr 24; use sinclude again.
1018 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
1020 * configure: Regenerated to track ../common/aclocal.m4 changes.
1023 Fri Apr 24 11:19:07 1998 Tom Tromey <tromey@cygnus.com>
1025 * configure.in: Don't call sinclude.
1027 Tue Apr 14 10:03:02 1998 Andrew Cagney <cagney@b1.cygnus.com>
1029 * mn10300_sim.h: Declare all functions in op_utils.c using
1031 * op_utils.c: Ditto.
1032 * sim-main.c: New file. Include op_utils.c.
1034 * mn10300.igen (mov, cmp): Use new igen operators `!' and `=' to
1035 differentiate between MOV/CMP immediate/register instructions.
1037 * configure.in (SIM_AC_OPTION_INLINE): Add and enable.
1038 * configure: Regenerate.
1040 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
1042 * configure: Regenerated to track ../common/aclocal.m4 changes.
1044 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
1046 * interp.c (hw): Delete variable, moved to SIM_DESC.
1047 (sim_open): Delete calls to hw_tree_create, hw_tree_finish.
1048 Handled by sim-module.
1049 (sim_open): Do not anotate tree with trace properties, handled by
1051 (sim_open): Call sim_hw_parse instead of hw_tree_parse.
1053 * configure: Regenerated to track ../common/aclocal.m4 changes.
1055 Thu Mar 26 20:46:18 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1057 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Save the entire PC
1058 on the stack when delivering interrupts (not just the lower
1060 * mn10300.igen (mov (Di,Am),Dn): Fix decode. Registers were
1061 specified in the wrong order.
1063 Fri Mar 27 00:56:40 1998 Andrew Cagney <cagney@b1.cygnus.com>
1065 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Stop loss of
1066 succeeding interrupts, clear pending_handler when the handler
1069 Thu Mar 26 10:11:01 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1071 * Makefile.in (tmp-igen): Prefix all usage of move-if-change
1072 script with $(SHELL) to make NT native builds happy.
1073 * configure: Regenerate because of change to ../common/aclocal.m4.
1075 Thu Mar 26 11:22:31 1998 Andrew Cagney <cagney@b1.cygnus.com>
1077 * configure.in: Make --enable-sim-common the default.
1078 * configure: Re-generate.
1080 * sim-main.h (CIA_GET, CIA_SET): Save/restore current instruction
1081 address into Sate.regs[REG_PC] instead of common struct.
1083 Wed Mar 25 17:42:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1085 * mn10300.igen (cmp imm8,An): Do not sign extend imm8 value.
1087 Wed Mar 25 12:08:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1089 * simops.c (OP_F0FD): Initialise variable 'sp'.
1091 Thu Mar 26 00:21:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
1093 * dv-mn103int.c (decode_group): A group register every 4 bytes not
1095 (write_icr): Rewrite equation updating request field.
1096 (read_iagr): Fix check that interrupt is still pending.
1098 Wed Mar 25 16:14:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
1100 * interp.c (sim_open): Tidy up device creation.
1102 * dv-mn103int.c (mn103int_port_event): Drive NMI with non-zero
1104 (mn103int_io_read_buffer): Convert absolute address to register
1106 (read_icr, write_icr): Convert block offset into group offset.
1108 Wed Mar 25 15:08:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
1110 * interp.c (sim_open): Create second 1mb memory region at
1112 (sim_open): Create a device tree.
1113 (sim-hw.h): Include.
1114 (do_interrupt): Delete, needs to use dv-mn103cpu.c
1116 * dv-mn103int.c, dv-mn103cpu.c: New files.
1118 Wed Mar 25 08:47:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
1120 * mn10300_sim.h (EXTRACT_PSW_LM, INSERT_PSW_LM, PSW_IE, PSW_LM):
1124 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
1126 * configure: Regenerated to track ../common/aclocal.m4 changes.
1128 Wed Mar 25 10:24:48 1998 Andrew Cagney <cagney@b1.cygnus.com>
1130 * interp.c (sim-options.h): Include.
1131 (sim_kind, myname): Declare when not using common framework.
1133 * mn10300_sim.h (do_syscall, generic*): Provide prototypes for
1134 functions found in op_utils.c
1136 * mn10300.igen (add): Discard unused variables.
1138 * configure, config.in: Re-generate with autoconf 2.12.1.
1140 Tue Mar 24 15:27:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1142 Add support for --enable-sim-common option.
1143 * Makefile.in (WITHOUT_COMMON_OBJS): Files included if
1144 ! --enable-sim-common
1145 (WITH_COMMON_OBJS): Files included if --enable-sim-common.
1146 (MN10300_OBJS,MN10300_INTERP_DEP): New variables.
1147 (SIM_OBJS): Rewrite.
1148 ({WITHOUT,WITH}_COMMON_RUN_OBJS,SIM_RUN_OBJS): New variables.
1149 (SIM_EXTRA_CFLAGS): New variable.
1150 (clean-extra): Clean up igen files.
1151 (../igen/igen,clean-igen,tmp-igen): New rules.
1152 * configure.in: Add support for common framework via
1153 --enable-sim-common.
1154 * configure: Regenerate.
1155 * interp.c: #include sim-main if WITH_COMMON, not mn10300_sim.h.
1156 (hash,dispatch,sim_size): Don't compile if ! WITH_COMMON.
1157 (init_system,sim_write,compare_simops): Likewise.
1158 (sim_set_profile,sim_set_profile_size): Likewise.
1159 (sim_stop,sim_resume,sim_trace,sim_info): Likewise.
1160 (sim_set_callbacks,sim_stop_reason,sim_read,sim_load): Likewise.
1161 (enum interrupt_type): New enum.
1162 (interrupt_names): New global.
1163 (do_interrupt): New function.
1164 (sim_open): Define differently if WITH_COMMON.
1165 (sim_close,sim_create_inferior,sim_do_command): Likewise.
1166 * mn10300_sim.h ({load,store}_{byte,half,word}): Define versions
1168 * mn10300.igen: New file.
1169 * mn10300.dc: New file.
1170 * op_utils.c: New file.
1171 * sim-main.h: New file.
1173 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
1175 * configure: Regenerated to track ../common/aclocal.m4 changes.
1177 Fri Feb 27 18:36:04 1998 Jeffrey A Law (law@cygnus.com)
1179 * simops.c (inc): Fix typo.
1181 Wed Feb 25 01:59:29 1998 Jeffrey A Law (law@cygnus.com)
1183 * simops.c (signed multiply instructions): Cast input operands to
1184 signed32 before casting them to signed64 so that the sign bit
1185 is propagated properly.
1187 Mon Feb 23 20:23:19 1998 Mark Alexander <marka@cygnus.com>
1189 * Makefile.in: Last change was bad. Define NL_TARGET
1190 so that targ-vals.h will be used instead of syscall.h.
1191 * simops.c: Use targ-vals.h instead of syscall.h.
1192 (OP_F020): Disable unsupported system calls.
1194 Mon Feb 23 09:44:38 1998 Mark Alexander <marka@cygnus.com>
1196 * Makefile.in: Get header files from libgloss/mn10300/sys.
1198 Sun Feb 22 16:02:24 1998 Jeffrey A Law (law@cygnus.com)
1200 * simops.c: Include sim-types.h.
1202 Wed Feb 18 13:07:08 1998 Jeffrey A Law (law@cygnus.com)
1204 * simops.c (multiply instructions): Cast input operands to a
1205 signed64/unsigned64 type as appropriate.
1207 Tue Feb 17 12:47:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
1209 * interp.c (sim_store_register, sim_fetch_register): Pass in
1210 length parameter. Return -1.
1212 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
1214 * configure: Regenerated to track ../common/aclocal.m4 changes.
1216 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
1218 * configure: Regenerated to track ../common/aclocal.m4 changes.
1220 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
1222 * configure: Regenerated to track ../common/aclocal.m4 changes.
1224 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
1226 * configure: Regenerated to track ../common/aclocal.m4 changes.
1229 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
1231 * configure: Regenerated to track ../common/aclocal.m4 changes.
1233 Tue Nov 11 10:38:52 1997 Jeffrey A Law (law@cygnus.com)
1235 * simops.c (call:16 call:32): Stack adjustment is determined solely
1238 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1240 * interp.c (sim_load): Pass lma_p and sim_write args to
1243 Tue Oct 21 10:12:03 1997 Jeffrey A Law (law@cygnus.com)
1245 * simops.c: Correctly handle register restores for "ret" and "retf"
1248 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1250 * configure: Regenerated to track ../common/aclocal.m4 changes.
1252 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
1254 * configure: Regenerated to track ../common/aclocal.m4 changes.
1256 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1258 * configure: Regenerated to track ../common/aclocal.m4 changes.
1260 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
1262 * configure: Regenerated to track ../common/aclocal.m4 changes.
1264 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
1266 * configure: Regenerated to track ../common/aclocal.m4 changes.
1268 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
1270 * configure: Regenerated to track ../common/aclocal.m4 changes.
1272 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
1274 * configure: Regenerated to track ../common/aclocal.m4 changes.
1276 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1278 * configure: Regenerated to track ../common/aclocal.m4 changes.
1281 Tue Aug 26 10:41:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
1283 * interp.c (sim_kill): Delete.
1284 (sim_create_inferior): Add ABFD argument.
1285 (sim_load): Move setting of PC from here.
1286 (sim_create_inferior): To here.
1288 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1290 * configure: Regenerated to track ../common/aclocal.m4 changes.
1293 Mon Aug 25 16:14:44 1997 Andrew Cagney <cagney@b1.cygnus.com>
1295 * interp.c (sim_open): Add ABFD argument.
1297 Tue Jun 24 13:46:20 1997 Jeffrey A Law (law@cygnus.com)
1299 * interp.c (sim_resume): Clear State.exited.
1300 (sim_stop_reason): If State.exited is nonzero, then indicate that
1301 the simulator exited instead of stopped.
1302 * mn10300_sim.h (struct _state): Add exited field.
1303 * simops.c (syscall): Set State.exited for SYS_exit.
1305 Wed Jun 11 22:07:56 1997 Jeffrey A Law (law@cygnus.com)
1307 * simops.c: Fix thinko in last change.
1309 Tue Jun 10 12:31:32 1997 Jeffrey A Law (law@cygnus.com)
1311 * simops.c: "call" stores the callee saved registers into the
1312 stack! Update the stack pointer properly when done with
1315 * simops.c: Fix return address computation for "call" instructions.
1317 Thu May 22 01:43:11 1997 Jeffrey A Law (law@cygnus.com)
1319 * interp.c (sim_open): Fix typo.
1321 Wed May 21 23:27:58 1997 Jeffrey A Law (law@cygnus.com)
1323 * interp.c (sim_resume): Add missing case in big switch
1324 statement (for extb instruction).
1326 Tue May 20 17:51:30 1997 Jeffrey A Law (law@cygnus.com)
1328 * interp.c: Replace all references to load_mem and store_mem
1329 with references to load_byte, load_half, load_3_byte, load_word
1330 and store_byte, store_half, store_3_byte, store_word.
1331 (INLINE): Delete definition.
1332 (load_mem_big): Likewise.
1333 (max_mem): Make it global.
1334 (dispatch): Make this function inline.
1335 (load_mem, store_mem): Delete functions.
1336 * mn10300_sim.h (INLINE): Define.
1337 (RLW): Delete unused definition.
1338 (load_mem, store_mem): Delete declarations.
1339 (load_mem_big): New definition.
1340 (load_byte, load_half, load_3_byte, load_word): New functions.
1341 (store_byte, store_half, store_3_byte, store_word): New functions.
1342 * simops.c: Replace all references to load_mem and store_mem
1343 with references to load_byte, load_half, load_3_byte, load_word
1344 and store_byte, store_half, store_3_byte, store_word.
1346 Tue May 20 10:21:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
1348 * interp.c (sim_open): Add callback to arguments.
1349 (sim_set_callbacks): Delete SIM_DESC argument.
1351 Mon May 19 13:54:22 1997 Jeffrey A Law (law@cygnus.com)
1353 * interp.c (dispatch): Make this an inline function.
1355 * simops.c (syscall): Use callback->write regardless of
1356 what file descriptor we're writing too.
1358 Sun May 18 16:46:31 1997 Jeffrey A Law (law@cygnus.com)
1360 * interp.c (load_mem_big): Remove function. It's now a macro
1362 (compare_simops): New function.
1363 (sim_open): Sort the Simops table before inserting entries
1364 into the hash table.
1365 * mn10300_sim.h: Remove unused #defines.
1366 (load_mem_big): Define.
1368 Fri May 16 16:36:17 1997 Jeffrey A Law (law@cygnus.com)
1370 * interp.c (load_mem): If we get a load from an out of range
1372 (store_mem): Likewise for stores.
1373 (max_mem): New variable.
1375 Tue May 6 13:24:36 1997 Jeffrey A Law (law@cygnus.com)
1377 * mn10300_sim.h: Fix ordering of bits in the PSW.
1379 * interp.c: Improve hashing routine to avoid long list
1380 traversals for common instructions. Add HASH_STAT support.
1381 Rewrite opcode dispatch code using a big switch instead of
1382 cascaded if/else statements. Avoid useless calls to load_mem.
1384 Mon May 5 18:07:48 1997 Jeffrey A Law (law@cygnus.com)
1386 * mn10300_sim.h (struct _state): Add space for mdrq register.
1388 * simops.c: Don't abort for trap. Add support for the extended
1389 instructions, "getx", "putx", "mulq", "mulqu", "sat16", "sat24",
1392 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1394 * configure: Regenerated to track ../common/aclocal.m4 changes.
1396 Fri Apr 18 14:04:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
1398 * interp.c (sim_stop): Add stub function.
1400 Thu Apr 17 03:26:59 1997 Doug Evans <dje@canuck.cygnus.com>
1402 * Makefile.in (SIM_OBJS): Add sim-load.o.
1403 * interp.c (sim_kind, myname): New static locals.
1404 (sim_open): Set sim_kind, myname. Ignore -E arg.
1405 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
1406 load file into simulator. Set start address from bfd.
1407 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
1409 Wed Apr 16 19:30:44 1997 Andrew Cagney <cagney@b1.cygnus.com>
1411 * simops.c (OP_F020): SYS_execv, SYS_time, SYS_times, SYS_utime
1412 only include if implemented by host.
1413 (OP_F020): Typecast arg passed to time function;
1415 Mon Apr 7 23:57:49 1997 Jeffrey A Law (law@cygnus.com)
1417 * simops.c (syscall): Handle new mn10300 calling conventions.
1419 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1421 * configure: Regenerated to track ../common/aclocal.m4 changes.
1424 Fri Apr 4 20:02:37 1997 Ian Lance Taylor <ian@cygnus.com>
1426 * Makefile.in: Change mn10300-opc.o to m10300-opc.o, to match
1427 corresponding change in opcodes directory.
1429 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1431 * interp.c (sim_open): New arg `kind'.
1433 * configure: Regenerated to track ../common/aclocal.m4 changes.
1435 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1437 * configure: Regenerated to track ../common/aclocal.m4 changes.
1439 Thu Mar 20 11:58:02 1997 Jeffrey A Law (law@cygnus.com)
1441 * simops.c: Fix register extraction for a two "movbu" variants.
1442 Somewhat simplify "sub" instructions.
1443 Correctly sign extend operands for "mul". Put the correct
1444 half of the result in MDR for "mul" and "mulu".
1445 Implement remaining instructions.
1446 Tweak opcode for "syscall".
1448 Tue Mar 18 14:21:21 1997 Jeffrey A Law (law@cygnus.com)
1450 * simops.c: Do syscall emulation in "syscall" instruction. Add
1451 dummy "trap" instruction.
1453 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1455 * configure: Regenerated to track ../common/aclocal.m4 changes.
1457 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1459 * configure: Re-generate.
1461 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
1463 * configure: Regenerate to track ../common/aclocal.m4 changes.
1465 Thu Mar 13 12:54:45 1997 Doug Evans <dje@canuck.cygnus.com>
1467 * interp.c (sim_open): New SIM_DESC result. Argument is now
1469 (other sim_*): New SIM_DESC argument.
1471 Wed Mar 12 15:04:00 1997 Jeffrey A Law (law@cygnus.com)
1473 * simops.c: Fix carry bit computation for "add" instructions.
1475 * simops.c: Fix typos in bset insns. Fix arguments to store_mem
1476 for bset imm8,(d8,an) and bclr imm8,(d8,an).
1478 Wed Mar 5 15:00:10 1997 Jeffrey A Law (law@cygnus.com)
1480 * simops.c: Fix register references when computing Z and N bits
1483 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
1485 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1486 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1487 * configure.in: sinclude ../common/aclocal.m4.
1488 * configure: Regenerated.
1490 Fri Jan 24 10:47:25 1997 Jeffrey A Law (law@cygnus.com)
1492 * interp.c (init_system): Allocate 2^19 bytes of space for the
1495 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1497 * configure configure.in Makefile.in: Update to new configure
1498 scheme which is more compatible with WinGDB builds.
1499 * configure.in: Improve comment on how to run autoconf.
1500 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1501 * Makefile.in: Use autoconf substitution to install common
1504 Tue Jan 21 15:03:04 1997 Jeffrey A Law (law@cygnus.com)
1506 * simops.c: Undo last change to "rol" and "ror", original code
1509 Thu Jan 16 11:28:14 1997 Jeffrey A Law (law@cygnus.com)
1511 * simops.c: Fix "rol" and "ror".
1513 Wed Jan 15 06:45:58 1997 Jeffrey A Law (law@cygnus.com)
1515 * simops.c: Fix typo in last change.
1517 Mon Jan 13 13:22:35 1997 Jeffrey A Law (law@cygnus.com)
1519 * simops.c: Use REG macros in few places not using them yet.
1521 Mon Jan 6 16:21:19 1997 Jeffrey A Law (law@cygnus.com)
1523 * mn10300_sim.h (struct _state): Fix number of registers!
1525 Tue Dec 31 16:20:41 1996 Jeffrey A Law (law@cygnus.com)
1527 * mn10300_sim.h (struct _state): Put all registers into a single
1528 array to make gdb implementation easier.
1529 (REG_*): Add definitions for all registers in the state array.
1530 (SEXT32, SEXT40, SEXT44, SEXT60): Remove unused macros.
1531 * simops.c: Related changes.
1533 Wed Dec 18 10:10:45 1996 Jeffrey A Law (law@cygnus.com)
1535 * interp.c (sim_resume): Handle 0xff as a single byte insn.
1537 * simops.c: Fix overflow computation for "add" and "inc"
1540 Mon Dec 16 10:03:52 1996 Jeffrey A Law (law@cygnus.com)
1542 * simops.c: Handle "break" instruction.
1544 * simops.c: Fix restoring the PC for "ret" and "retf" instructions.
1546 Wed Dec 11 09:53:10 1996 Jeffrey A Law (law@cygnus.com)
1548 * gencode.c (write_opcodes): Also write out the format of the
1550 * mn10300_sim.h (simops): Add "format" field.
1551 * interp.c (sim_resume): Deal with endianness issues here.
1553 Tue Dec 10 15:05:37 1996 Jeffrey A Law (law@cygnus.com)
1555 * simops.c (REG0_4): Define.
1556 Use REG0_4 for indexed loads/stores.
1558 Sat Dec 7 09:50:28 1996 Jeffrey A Law (law@cygnus.com)
1560 * simops.c (REG0_16): Fix typo.
1562 Fri Dec 6 14:13:34 1996 Jeffrey A Law (law@cygnus.com)
1564 * simops.c: Call abort for any instruction that's not currently
1567 * simops.c: Define accessor macros to extract register
1568 values from instructions. Use them consistently.
1570 * interp.c: Delete unused global variable "OP".
1571 (sim_resume): Remove unused variable "opcode".
1572 * simops.c: Fix some uninitialized variable problems, add
1573 parens to fix various -Wall warnings.
1575 * gencode.c (write_header): Add "insn" and "extension" arguments
1576 to the OP_* declarations.
1577 (write_template): Similarly for function templates.
1578 * interp.c (insn, extension): Remove global variables. Instead
1579 pass them as arguments to the OP_* functions.
1580 * mn10300_sim.h: Remove decls for "insn" and "extension".
1581 * simops.c (OP_*): Accept "insn" and "extension" as arguments
1582 instead of using globals.
1584 Thu Dec 5 22:26:31 1996 Jeffrey A Law (law@cygnus.com)
1586 * simops.c: Fix typos in "mov am,(d16,an)" and "mov am,(d32,an)"
1588 * simops.c: Fix thinkos in last change to "inc dn".
1590 Wed Dec 4 10:57:53 1996 Jeffrey A Law (law@cygnus.com)
1592 * simops.c: "add imm,sp" does not effect the condition codes.
1593 "inc dn" does effect the condition codes.
1595 Tue Dec 3 17:37:45 1996 Jeffrey A Law (law@cygnus.com)
1597 * simops.c: Treat both operands as signed values for
1600 * simops.c: Fix simulation of division instructions.
1601 Fix typos/thinkos in several "cmp" and "sub" instructions.
1603 Mon Dec 2 12:31:40 1996 Jeffrey A Law (law@cygnus.com)
1605 * simops.c: Fix carry bit handling in "sub" and "cmp"
1608 * simops.c: Fix "mov imm8,an" and "mov imm16,dn".
1610 Sun Dec 1 16:05:42 1996 Jeffrey A Law (law@cygnus.com)
1612 * simops.c: Fix overflow computation for many instructions.
1614 * simops.c: Fix "mov dm, an", "movbu dm, (an)", and "movhu dm, (an)".
1616 * simops.c: Fix "mov am, dn".
1618 * simops.c: Fix more bugs in "add imm,an" and
1621 Wed Nov 27 09:20:42 1996 Jeffrey A Law (law@cygnus.com)
1623 * simops.c: Fix bugs in "movm" and "add imm,an".
1625 * simops.c: Don't lose the upper 24 bits of the return
1626 pointer in "call" and "calls" instructions. Rough cut
1627 at emulated system calls.
1629 * simops.c: Implement the remaining 5, 6 and 7 byte instructions.
1631 * simops.c: Implement remaining 4 byte instructions.
1633 * simops.c: Implement remaining 3 byte instructions.
1635 * simops.c: Implement remaining 2 byte instructions. Call
1636 abort for instructions we're not implementing now.
1638 Tue Nov 26 15:43:41 1996 Jeffrey A Law (law@cygnus.com)
1640 * simops.c: Implement lots of random instructions.
1642 * simops.c: Implement "movm" and "bCC" insns.
1644 * mn10300_sim.h (_state): Add another register (MDR).
1646 * simops.c: Implement "cmp", "calls", "rets", "jmp" and
1647 a few additional random insns.
1649 * mn10300_sim.h (PSW_*): Define for CC status tracking.
1650 (REG_D0, REG_A0, REG_SP): Define.
1651 * simops.c: Implement "add", "addc" and a few other random
1654 * gencode.c, interp.c: Snapshot current simulator code.
1656 Mon Nov 25 12:46:38 1996 Jeffrey A Law (law@cygnus.com)
1658 * Makefile.in, config.in, configure, configure.in: New files.
1659 * gencode.c, interp.c, mn10300_sim.h, simops.c: New files.