The buildbots show that attach-many-short-lived-thread.exp is racy.
But after staring at debug logs and playing with SystemTap scripts for
a (long) while, I figured out that neither GDB, nor the kernel nor the
test's program itself are at fault.
The problem is simply that the testsuite machinery is currently
subject to PID-reuse races. The attach-many-short-lived-threads.c
test program just happens to be much more susceptible to trigger this
race because threads and processes share the same number space on
Linux, and the test spawns many many short lived threads in
succession, thus enlarging the race window a lot.
Part of the problem is that several tests spawn processes with "exec&"
(in order to test the "attach" command) , and then at the end of the
test, to make sure things are cleaned up, issue a 'remote_spawn "kill
-p $testpid"'. Since with tcl's "exec&", tcl itself is responsible
for reaping the process's exit status, when we go kill the process,
testpid may have already exited _and_ its status may have (and often
has) been reaped already. Thus it can happen that another process
meanwhile reuses $testpid, and that "kill" command kills the wrong
process... Frequently, that happens to be
attach-many-short-lived-thread, but this explains other test's races
as well.
In the attach-many-short-lived-threads test, it sometimes manifests
like this:
(gdb) file /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads
Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads...done.
(gdb) Loaded /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads into /home/pedro/gdb/mygit/build/gdb/testsuite/../../gdb/gdb
attach 5940
Attaching to program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads, process 5940
warning: process 5940 is a zombie - the process has already terminated
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ptrace: Operation not permitted.
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
info threads
No threads.
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
set breakpoint always-inserted on
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
Other times the process dies while the test is ongoing (the process is
ptrace-stopped):
(gdb) print again = 1
Cannot access memory at address 0x6020cc
(gdb) FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
(Recall that on Linux, SIGKILL is not interceptable)
And other times it dies just while we're detaching:
$4 = 319
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
detach
Can't detach Thread 0x7fb13b7de700 (LWP 1842): No such process
(gdb) FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
GDB mishandles the latter (it should ignore ESRCH while detaching just
like when continuing), but that's another story.
The fix here is to change spawn_wait_for_attach to use Expect's
'spawn' command instead of Tcl's 'exec&' to spawn programs, because
with spawn we control when to wait for/reap the process. That allows
killing the process by PID without being subject to pid-reuse races,
because even if the process is already dead, the kernel won't reuse
the process's PID until the zombie is reaped.
The other part of the problem lies in DejaGnu itself, unfortunately.
I have occasionally seen tests (attach-many-short-lived-threads
included, but not only that one) die with a random inexplicable
SIGTERM too, and that too is caused by the same reason, except that in
that case, the rogue SIGTERM is sent from this bit in DejaGnu's remote.exp:
exec sh -c "exec > /dev/null 2>&1 && (kill -2 $pgid || kill -2 $pid) && sleep 5 && (kill $pgid || kill $pid) && sleep 5 && (kill -9 $pgid || kill -9 $pid) &"
...
catch "wait -i $shell_id"
Even if the program exits promptly, that whole cascade of kills
carries on in the background, thus potentially killing the poor
process that manages to reuse $pid...
I sent a fix for that to the DejaGnu list:
http://lists.gnu.org/archive/html/dejagnu/2015-07/msg00000.html
With both patches in place, I haven't seen
attach-many-short-lived-threads.exp fail again.
Tested on x86_64 Fedora 20, native, gdbserver and extended-gdbserver.
gdb/testsuite/ChangeLog:
2015-07-31 Pedro Alves <palves@redhat.com>
* gdb.base/attach-pie-misread.exp: Rename $res to $test_spawn_id.
Use spawn_id_get_pid. Wait for spawn id after eof. Use
kill_wait_spawned_process instead of explicit "kill -9".
* gdb.base/attach-pie-noexec.exp: Adjust to spawn_wait_for_attach
returning a spawn id instead of a pid. Use spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/attach-twice.exp: Likewise.
* gdb.base/attach.exp: Likewise.
(do_command_attach_tests): Use gdb_spawn_with_cmdline_opts and
gdb_test_multiple.
* gdb.base/solib-overlap.exp: Adjust to spawn_wait_for_attach
returning a spawn id instead of a pid. Use spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/valgrind-infcall.exp: Likewise.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.threads/attach-into-signal.exp (corefunc): Use
spawn_wait_for_attach, spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.threads/attach-many-short-lived-threads.exp: Adjust to
spawn_wait_for_attach returning a spawn id instead of a pid. Use
spawn_id_get_pid and kill_wait_spawned_process.
* gdb.threads/attach-stopped.exp (corefunc): Use
spawn_wait_for_attach, spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/break-interp.exp: Rename $res to $test_spawn_id.
Use spawn_id_get_pid. Wait for spawn id after eof. Use
kill_wait_spawned_process instead of explicit "kill -9".
* lib/gdb.exp (can_spawn_for_attach): Adjust comment.
(kill_wait_spawned_process, spawn_id_get_pid): New procedures.
(spawn_wait_for_attach): Use spawn instead of exec to spawn
processes. Don't map cygwin/windows pids here. Now returns a
spawn id list.
+2015-07-31 Pedro Alves <palves@redhat.com>
+
+ * gdb.base/attach-pie-misread.exp: Rename $res to $test_spawn_id.
+ Use spawn_id_get_pid. Wait for spawn id after eof. Use
+ kill_wait_spawned_process instead of explicit "kill -9".
+ * gdb.base/attach-pie-noexec.exp: Adjust to spawn_wait_for_attach
+ returning a spawn id instead of a pid. Use spawn_id_get_pid and
+ kill_wait_spawned_process.
+ * gdb.base/attach-twice.exp: Likewise.
+ * gdb.base/attach.exp: Likewise.
+ (do_command_attach_tests): Use gdb_spawn_with_cmdline_opts and
+ gdb_test_multiple.
+ * gdb.base/solib-overlap.exp: Adjust to spawn_wait_for_attach
+ returning a spawn id instead of a pid. Use spawn_id_get_pid and
+ kill_wait_spawned_process.
+ * gdb.base/valgrind-infcall.exp: Likewise.
+ * gdb.multi/multi-attach.exp: Likewise.
+ * gdb.python/py-prompt.exp: Likewise.
+ * gdb.python/py-sync-interp.exp: Likewise.
+ * gdb.server/ext-attach.exp: Likewise.
+ * gdb.threads/attach-into-signal.exp (corefunc): Use
+ spawn_wait_for_attach, spawn_id_get_pid and
+ kill_wait_spawned_process.
+ * gdb.threads/attach-many-short-lived-threads.exp: Adjust to
+ spawn_wait_for_attach returning a spawn id instead of a pid. Use
+ spawn_id_get_pid and kill_wait_spawned_process.
+ * gdb.threads/attach-stopped.exp (corefunc): Use
+ spawn_wait_for_attach, spawn_id_get_pid and
+ kill_wait_spawned_process.
+ * gdb.base/break-interp.exp: Rename $res to $test_spawn_id.
+ Use spawn_id_get_pid. Wait for spawn id after eof. Use
+ kill_wait_spawned_process instead of explicit "kill -9".
+ * lib/gdb.exp (can_spawn_for_attach): Adjust comment.
+ (kill_wait_spawned_process, spawn_id_get_pid): New procedures.
+ (spawn_wait_for_attach): Use spawn instead of exec to spawn
+ processes. Don't map cygwin/windows pids here. Now returns a
+ spawn id list.
+
2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
* gdb.cp/var-tag.exp (do_global_tests): Revert broken commit
set test "start inferior"
gdb_exit
-set res [remote_spawn host $binfile]
-if { $res < 0 || $res == "" } {
+set test_spawn_id [remote_spawn host $binfile]
+if { $test_spawn_id < 0 || $test_spawn_id == "" } {
perror "Spawning $binfile failed."
fail $test
return
}
-set pid [exp_pid -i $res]
+set testpid [spawn_id_get_pid $test_spawn_id]
gdb_expect {
-re "sleeping\r\n" {
pass $test
}
eof {
fail "$test (eof)"
- remote_exec host "kill -9 $pid"
+ wait -i $test_spawn_id
return
}
timeout {
fail "$test (timeout)"
- remote_exec host "kill -9 $pid"
+ kill_wait_spawned_process $test_spawn_id
return
}
}
clean_restart $executable
set test "attach"
- gdb_test_multiple "attach $pid" $test {
- -re "Attaching to program: .*, process $pid\r\n" {
+ gdb_test_multiple "attach $testpid" $test {
+ -re "Attaching to program: .*, process $testpid\r\n" {
# Missing "$gdb_prompt $" is intentional.
pass $test
}
gdb_test "detach" "Detaching from program: .*"
}}
-remote_exec host "kill -9 $pid"
+kill_wait_spawned_process $test_spawn_id
# Start the program running and then wait for a bit, to be sure
# that it can be attached to.
-set testpid [spawn_wait_for_attach $binfile]
+set test_spawn_id [spawn_wait_for_attach $binfile]
+set testpid [spawn_id_get_pid $test_spawn_id]
gdb_start
file delete -- $binfile
gdb_test "set architecture $arch" "The target architecture is assumed to be $arch"
gdb_test "info shared" "From\[ \t\]+To\[ \t\]+Syms Read\[ \t\]+Shared Object Library\r\n0x.*"
-eval exec kill -9 $testpid
+kill_wait_spawned_process $test_spawn_id
# Start the program running and then wait for a bit, to be sure
# that it can be attached to.
-set testpid [spawn_wait_for_attach $binfile]
+set test_spawn_id [spawn_wait_for_attach $binfile]
+set testpid [spawn_id_get_pid $test_spawn_id]
set parentpid 0
if {$parentpid != 0} {
eval exec kill -9 $parentpid
}
-eval exec kill -9 $testpid
+kill_wait_spawned_process $test_spawn_id
# Start the program running and then wait for a bit, to be sure
# that it can be attached to.
- set testpid [spawn_wait_for_attach $binfile]
+ set test_spawn_id [spawn_wait_for_attach $binfile]
+ set testpid [spawn_id_get_pid $test_spawn_id]
# Verify that we cannot attach to nonsense.
# the next test run (and prevent the compile by keeping
# the text file busy), in case the "set should_exit" didn't
# work.
-
- remote_exec build "kill -9 ${testpid}"
- set testpid [spawn_wait_for_attach $binfile]
+ kill_wait_spawned_process $test_spawn_id
+
+ set test_spawn_id [spawn_wait_for_attach $binfile]
+ set testpid [spawn_id_get_pid $test_spawn_id]
# Verify that we can attach to the process, and find its a.out
# when we're cd'd to some directory that doesn't contain the
"y"
# Another "don't leave a process around"
- remote_exec build "kill -9 ${testpid}"
+ kill_wait_spawned_process $test_spawn_id
}
proc do_call_attach_tests {} {
global gdb_prompt
global binfile2
- set testpid [spawn_wait_for_attach $binfile2]
+ set test_spawn_id [spawn_wait_for_attach $binfile2]
+ set testpid [spawn_id_get_pid $test_spawn_id]
# Attach
# Be paranoid
- remote_exec build "kill -9 ${testpid}"
+ kill_wait_spawned_process $test_spawn_id
}
proc do_command_attach_tests {} {
return 0
}
- set testpid [spawn_wait_for_attach $binfile]
+ set test_spawn_id [spawn_wait_for_attach $binfile]
+ set testpid [spawn_id_get_pid $test_spawn_id]
gdb_exit
- if $verbose>1 then {
- send_user "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS --pid=$testpid\n"
- }
- eval "spawn $GDB $INTERNAL_GDBFLAGS $GDBFLAGS --pid=$testpid"
+ set res [gdb_spawn_with_cmdline_opts "--pid=$testpid"]
set test "starting with --pid"
- expect {
+ gdb_test_multiple "" $test {
-re "Reading symbols from.*$gdb_prompt $" {
pass "$test"
}
- timeout {
- fail "$test (timeout)"
- }
}
# Get rid of the process
-
- remote_exec build "kill -9 ${testpid}"
+ kill_wait_spawned_process $test_spawn_id
}
# Test ' gdb --pid PID -ex "run" '. GDB used to have a bug where
}
with_test_prefix "cmdline attach run" {
- set testpid [spawn_wait_for_attach $binfile]
+ set test_spawn_id [spawn_wait_for_attach $binfile]
+ set testpid [spawn_id_get_pid $test_spawn_id]
set test "run to prompt"
gdb_exit
"-iex \"set height 0\" -iex \"set width 0\" --pid=$testpid -ex \"start\""]
if { $res != 0} {
fail $test
- remote_exec build "kill -9 ${testpid}"
+ kill_wait_spawned_process $test_spawn_id
return $res
}
gdb_test_multiple "" $test {
}
# Get rid of the process
- remote_exec build "kill -9 ${testpid}"
+ kill_wait_spawned_process $test_spawn_id
}
}
set test "sleep function started"
set command "${file} sleep"
- set res [remote_spawn host $command]
- if { $res < 0 || $res == "" } {
+ set test_spawn_id [remote_spawn host $command]
+ if { $test_spawn_id < 0 || $test_spawn_id == "" } {
perror "Spawning $command failed."
fail $test
return
}
- set pid [exp_pid -i $res]
+ set pid [spawn_id_get_pid $test_spawn_id]
gdb_expect {
-re "sleeping\r\n" {
pass $test
}
eof {
fail "$test (eof)"
+ wait -i $test_spawn_id
return
}
timeout {
fail "$test (timeout)"
+ kill_wait_spawned_process $test_spawn_id
return
}
}
file_copy $interp_saved $interp
}
- remote_exec host "kill -9 $pid"
+ kill_wait_spawned_process $test_spawn_id
}
proc test_ld {file ifmain trynosym displacement} {
return -1
}
- set testpid [spawn_wait_for_attach $binfile]
+ set test_spawn_id [spawn_wait_for_attach $binfile]
+ set testpid [spawn_id_get_pid $test_spawn_id]
remote_exec build "mv -f ${binfile_lib1} ${binfile_lib1}-running"
remote_exec build "mv -f ${binfile_lib2} ${binfile_lib2}-running"
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib1} $lib_flags] != ""
|| [gdb_compile_shlib ${srcfile_lib} ${binfile_lib2} $lib_flags] != ""} {
untested "Could not recompile ${binfile_lib1_test_msg} or ${binfile_lib2_test_msg}."
- remote_exec build "kill -9 ${testpid}"
+ kill_wait_spawned_process $test_spawn_id
return -1
}
sleep 5
- remote_exec build "kill -9 ${testpid}"
+ kill_wait_spawned_process $test_spawn_id
}}
}
# Do not kill valgrind.
-set valgrind_pid [exp_pid -i [board_info host fileid]]
+set valgrind_spawn_id [board_info host fileid]
unset gdb_spawn_id
set board [host_info name]
unset_board_info fileid
-re "Remote connection closed.*\r\n$gdb_prompt $" {
fail "$test (remote connection closed)"
# Only if valgrind got stuck.
- remote_exec host "kill -9 ${valgrind_pid}"
+ kill_wait_spawned_process $valgrind_spawn_id
return -1
}
-re "The program is not being run\\.\r\n$gdb_prompt $" {
fail "$test (valgrind vgdb has terminated)"
# Only if valgrind got stuck.
- remote_exec host "kill -9 ${valgrind_pid}"
+ kill_wait_spawned_process $valgrind_spawn_id
return -1
}
-re "\r\n$gdb_prompt $" {
}
# Only if valgrind got stuck.
-remote_exec host "kill -9 ${valgrind_pid}"
+kill_wait_spawned_process $valgrind_spawn_id
# Start the programs running and then wait for a bit, to be sure that
# they can be attached to.
-set pid_list [spawn_wait_for_attach [list $binfile $binfile]]
-set testpid1 [lindex $pid_list 0]
-set testpid2 [lindex $pid_list 1]
+set spawn_id_list [spawn_wait_for_attach [list $binfile $binfile]]
+set test_spawn_id1 [lindex $spawn_id_list 0]
+set test_spawn_id2 [lindex $spawn_id_list 1]
+set testpid1 [spawn_id_get_pid $test_spawn_id1]
+set testpid2 [spawn_id_get_pid $test_spawn_id2]
gdb_test "attach $testpid1" \
"Attaching to program: .*, process $testpid1.*(in|at).*" \
gdb_test "kill" "" "kill inferior 2" "Kill the program being debugged.*" "y"
gdb_test "inferior 1" ".*Switching to inferior 1.*"
gdb_test "kill" "" "kill inferior 1" "Kill the program being debugged.*" "y"
+
+kill_wait_spawned_process $test_spawn_id1
+kill_wait_spawned_process $test_spawn_id2
return 0
}
-set testpid [spawn_wait_for_attach $binfile]
+set test_spawn_id [spawn_wait_for_attach $binfile]
+set testpid [spawn_id_get_pid $test_spawn_id]
set GDBFLAGS [concat $tmp_gdbflags " -ex \"set pagination off\""]
set GDBFLAGS [concat $GDBFLAGS " -ex \"set editing on\""]
gdb_exit
set GDBFLAGS $saved_gdbflags
-exec kill -9 ${testpid}
+kill_wait_spawned_process $test_spawn_id
return 0
return -1
}
-set testpid [spawn_wait_for_attach $binfile]
+set test_spawn_id [spawn_wait_for_attach $binfile]
+set testpid [spawn_id_get_pid $test_spawn_id]
# Test command 'where' is executed when command 'attach' is done, otherwise
# function 'sleep' may not show up in backtrace.
gdb_test "python gdb.execute(\"attach $testpid\"); gdb.execute(\"where\")" \
"in .*sleep \\(.*\\) .* in foo1 \\(\\) at .* in foo2 \\(\\) at .*" \
"attach and where"
+
+kill_wait_spawned_process $test_spawn_id
gdb_test_no_output "set remote exec-file $target_exec" "set remote exec-file"
-set testpid [spawn_wait_for_attach $binfile]
+set test_spawn_id [spawn_wait_for_attach $binfile]
+set testpid [spawn_id_get_pid $test_spawn_id]
gdb_test "attach $testpid" \
"Attaching to program: .*, process $testpid.*(in|at).*" \
gdb_test "kill" "" "kill" "Kill the program being debugged.*" "y"
gdb_test_no_output "monitor exit"
+
+kill_wait_spawned_process $test_spawn_id
gdb_test "handle SIGALRM stop print pass" "Yes.*Yes.*Yes.*"
- # Start the program running and then wait for a bit, to be sure
- # that it can be attached to.
- # Statistically there is a better chance without giving process a nice.
-
- set testpid [eval exec $binfile &]
- exec sleep 2
+ set test_spawn_id [spawn_wait_for_attach $binfile]
+ set testpid [spawn_id_get_pid $test_spawn_id]
# Run 2 passes of the test.
# The C file inferior stops pending its signals if a single one is lost,
# Exit and detach the process.
gdb_exit
- # Make sure we don't leave a process around to confuse the
- # next test run (and prevent the compile by keeping the text
- # file busy), in case the "set should_exit" didn't work.
-
# Continue the program - some Linux kernels need it before -9 if the
# process is stopped.
remote_exec build "kill -s CONT ${testpid}"
- remote_exec build "kill -9 ${testpid}"
-
+ kill_wait_spawned_process $test_spawn_id
}
}
clean_restart ${binfile}
- set testpid [spawn_wait_for_attach $binfile]
+ set test_spawn_id [spawn_wait_for_attach $binfile]
+ set testpid [spawn_id_get_pid $test_spawn_id]
set attempts 10
for {set attempt 1} { $attempt <= $attempts } { incr attempt } {
delete_breakpoints
}
}
-
- remote_exec target "kill -9 ${testpid}"
+ kill_wait_spawned_process $test_spawn_id
}
# The test program exits after a while, in case GDB crashes. Make it
return -1
}
- # Start the program running and then wait for a bit, to be sure
- # that it can be attached to.
-
- set testpid [eval exec $binfile &]
-
- # Avoid some race:
- sleep 2
+ set test_spawn_id [spawn_wait_for_attach $binfile]
+ set testpid [spawn_id_get_pid $test_spawn_id]
# Stop the program
remote_exec build "kill -s STOP ${testpid}"
# the Linux kernel version. The behavior is not tested as it is not
# dependent on GDB.
- remote_exec build "kill -9 ${testpid}"
+ kill_wait_spawned_process $test_spawn_id
}
# build the test case first without threads
# it.
proc can_spawn_for_attach { } {
- # We use TCL's exec to get the inferior's pid.
+ # We use exp_pid to get the inferior's pid, assuming that gives
+ # back the pid of the program. On remote boards, that would give
+ # us instead the PID of e.g., the ssh client, etc.
if [is_remote target] then {
return 0
}
return 1
}
+# Kill a progress previously started with spawn_wait_for_attach, and
+# reap its wait status. PROC_SPAWN_ID is the spawn id associated with
+# the process.
+
+proc kill_wait_spawned_process { proc_spawn_id } {
+ set pid [exp_pid -i $proc_spawn_id]
+
+ verbose -log "killing ${pid}"
+ remote_exec build "kill -9 ${pid}"
+
+ verbose -log "closing ${proc_spawn_id}"
+ catch "close -i $proc_spawn_id"
+ verbose -log "waiting for ${proc_spawn_id}"
+
+ # If somehow GDB ends up still attached to the process here, a
+ # blocking wait hangs until gdb is killed (or until gdb / the
+ # ptracer reaps the exit status too, but that won't happen because
+ # something went wrong.) Passing -nowait makes expect tell Tcl to
+ # wait for the PID in the background. That's fine because we
+ # don't care about the exit status. */
+ wait -nowait -i $proc_spawn_id
+}
+
+# Returns the process id corresponding to the given spawn id.
+
+proc spawn_id_get_pid { spawn_id } {
+ set testpid [exp_pid -i $spawn_id]
+
+ if { [istarget "*-*-cygwin*"] } {
+ # testpid is the Cygwin PID, GDB uses the Windows PID, which
+ # might be different due to the way fork/exec works.
+ set testpid [ exec ps -e | gawk "{ if (\$1 == $testpid) print \$4; }" ]
+ }
+
+ return $testpid
+}
+
# Start a set of programs running and then wait for a bit, to be sure
-# that they can be attached to. Return a list of the processes' PIDs.
-# It's a test error to call this when [can_spawn_for_attach] is false.
+# that they can be attached to. Return a list of processes spawn IDs,
+# one element for each process spawned. It's a test error to call
+# this when [can_spawn_for_attach] is false.
proc spawn_wait_for_attach { executable_list } {
- set pid_list {}
+ set spawn_id_list {}
if ![can_spawn_for_attach] {
# The caller should have checked can_spawn_for_attach itself
}
foreach {executable} $executable_list {
- lappend pid_list [eval exec $executable &]
+ # Note we use Expect's spawn, not Tcl's exec, because with
+ # spawn we control when to wait for/reap the process. That
+ # allows killing the process by PID without being subject to
+ # pid-reuse races.
+ lappend spawn_id_list [remote_spawn target $executable]
}
sleep 2
- if { [istarget "*-*-cygwin*"] } {
- for {set i 0} {$i < [llength $pid_list]} {incr i} {
- # testpid is the Cygwin PID, GDB uses the Windows PID,
- # which might be different due to the way fork/exec works.
- set testpid [lindex $pid_list $i]
- set testpid [ exec ps -e | gawk "{ if (\$1 == $testpid) print \$4; }" ]
- set pid_list [lreplace $pid_list $i $i $testpid]
- }
- }
-
- return $pid_list
+ return $spawn_id_list
}
#
projects / thirdparty / binutils-gdb.git / commitdiff
