enable_sim_profile
with_pkgversion
with_bugurl
+enable_sim_endian
+enable_sim_alignment
+enable_sim_hostendian
+enable_sim_environment
+enable_sim_inline
enable_werror
enable_build_warnings
enable_sim_build_warnings
--enable-sim-stdio Specify whether to use stdio for console input/output.
--enable-sim-trace=opts Enable tracing flags
--enable-sim-profile=opts Enable profiling flags
+ --enable-sim-endian=endian Specify target byte endian orientation.
+ --enable-sim-alignment=align Specify strict, nonstrict or forced alignment of memory accesses.
+ --enable-sim-hostendian=end Specify host byte endian orientation.
+ --enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
+ --enable-sim-inline=inlines Specify which functions should be inlined.
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12365 "configure"
+#line 12375 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12471 "configure"
+#line 12481 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+wire_endian=""
+default_endian=""
+# Check whether --enable-sim-endian was given.
+if test "${enable_sim_endian+set}" = set; then :
+ enableval=$enable_sim_endian; case "${enableval}" in
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ yes) if test x"$wire_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ else
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ else
+ echo "No hard-wired endian for target $target" 1>&6
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ fi
+ fi;;
+ no) if test x"$default_endian" != x; then
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ else
+ if test x"$wire_endian" != x; then
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ else
+ echo "No default endian for target $target" 1>&6
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ fi
+ fi;;
+ *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
+ echo "Setting endian flags = $sim_endian" 6>&1
+fi
+else
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+else
+ if test x"$wire_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ else
+ sim_endian=
+ fi
+fi
+fi
+
+wire_alignment="STRICT_ALIGNMENT"
+default_alignment="STRICT_ALIGNMENT"
+
+# Check whether --enable-sim-alignment was given.
+if test "${enable_sim_alignment+set}" = set; then :
+ enableval=$enable_sim_alignment; case "${enableval}" in
+ strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
+ nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
+ forced | FORCED) sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;
+ yes) if test x"$wire_alignment" != x; then
+ sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
+ else
+ if test x"$default_alignment" != x; then
+ sim_alignment="-DWITH_ALIGNMENT=${default_alignment}"
+ else
+ echo "No hard-wired alignment for target $target" 1>&6
+ sim_alignment="-DWITH_ALIGNMENT=0"
+ fi
+ fi;;
+ no) if test x"$default_alignment" != x; then
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
+ else
+ if test x"$wire_alignment" != x; then
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}"
+ else
+ echo "No default alignment for target $target" 1>&6
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
+ fi
+ fi;;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-alignment\"" "$LINENO" 5; sim_alignment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
+ echo "Setting alignment flags = $sim_alignment" 6>&1
+fi
+else
+ if test x"$default_alignment" != x; then
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
+else
+ if test x"$wire_alignment" != x; then
+ sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
+ else
+ sim_alignment=
+ fi
+fi
+fi
+
+
+# Check whether --enable-sim-hostendian was given.
+if test "${enable_sim_hostendian+set}" = set; then :
+ enableval=$enable_sim_hostendian; case "${enableval}" in
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
+ echo "Setting hostendian flags = $sim_hostendian" 6>&1
+fi
+else
+
+if test "x$cross_compiling" = "xno"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
+$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
+if test "${ac_cv_c_bigendian+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_c_bigendian=unknown
+ # See if we're dealing with a universal compiler.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifndef __APPLE_CC__
+ not a universal capable compiler
+ #endif
+ typedef int dummy;
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ # Check for potential -arch flags. It is not universal unless
+ # there are at least two -arch flags with different values.
+ ac_arch=
+ ac_prev=
+ for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
+ if test -n "$ac_prev"; then
+ case $ac_word in
+ i?86 | x86_64 | ppc | ppc64)
+ if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
+ ac_arch=$ac_word
+ else
+ ac_cv_c_bigendian=universal
+ break
+ fi
+ ;;
+ esac
+ ac_prev=
+ elif test "x$ac_word" = "x-arch"; then
+ ac_prev=arch
+ fi
+ done
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ if test $ac_cv_c_bigendian = unknown; then
+ # See if sys/param.h defines the BYTE_ORDER macro.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/param.h>
+
+int
+main ()
+{
+#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
+ && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
+ && LITTLE_ENDIAN)
+ bogus endian macros
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ # It does; now see whether it defined to BIG_ENDIAN or not.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/param.h>
+
+int
+main ()
+{
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_bigendian=yes
+else
+ ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ if test $ac_cv_c_bigendian = unknown; then
+ # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <limits.h>
+
+int
+main ()
+{
+#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
+ bogus endian macros
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ # It does; now see whether it defined to _BIG_ENDIAN or not.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <limits.h>
+
+int
+main ()
+{
+#ifndef _BIG_ENDIAN
+ not big endian
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_bigendian=yes
+else
+ ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ if test $ac_cv_c_bigendian = unknown; then
+ # Compile a test program.
+ if test "$cross_compiling" = yes; then :
+ # Try to guess by grepping values from an object file.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+short int ascii_mm[] =
+ { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+ short int ascii_ii[] =
+ { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+ int use_ascii (int i) {
+ return ascii_mm[i] + ascii_ii[i];
+ }
+ short int ebcdic_ii[] =
+ { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+ short int ebcdic_mm[] =
+ { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+ int use_ebcdic (int i) {
+ return ebcdic_mm[i] + ebcdic_ii[i];
+ }
+ extern int foo;
+
+int
+main ()
+{
+return use_ascii (foo) == use_ebcdic (foo);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
+ ac_cv_c_bigendian=yes
+ fi
+ if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+ if test "$ac_cv_c_bigendian" = unknown; then
+ ac_cv_c_bigendian=no
+ else
+ # finding both strings is unlikely to happen, but who knows?
+ ac_cv_c_bigendian=unknown
+ fi
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long int l;
+ char c[sizeof (long int)];
+ } u;
+ u.l = 1;
+ return u.c[sizeof (long int) - 1] == 1;
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_c_bigendian=no
+else
+ ac_cv_c_bigendian=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
+$as_echo "$ac_cv_c_bigendian" >&6; }
+ case $ac_cv_c_bigendian in #(
+ yes)
+ $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h
+;; #(
+ no)
+ ;; #(
+ universal)
+
+$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
+
+ ;; #(
+ *)
+ as_fn_error "unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
+ esac
+
+ if test $ac_cv_c_bigendian = yes; then
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ else
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ fi
+else
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+fi
+fi
+
+
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
+default_sim_inline=""
+# Check whether --enable-sim-inline was given.
+if test "${enable_sim_inline+set}" = set; then :
+ enableval=$enable_sim_inline; sim_inline=""
+case "$enableval" in
+ no) sim_inline="-DDEFAULT_INLINE=0";;
+ 0) sim_inline="-DDEFAULT_INLINE=0";;
+ yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_C_INLINE";;
+ 1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
+ *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+ new_flag=""
+ case "$x" in
+ *_INLINE=*) new_flag="-D$x";;
+ *=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
+ *_INLINE) new_flag="-D$x=ALL_C_INLINE";;
+ *) new_flag="-D$x""_INLINE=ALL_C_INLINE";;
+ esac
+ if test x"$sim_inline" = x""; then
+ sim_inline="$new_flag"
+ else
+ sim_inline="$sim_inline $new_flag"
+ fi
+ done;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
+ echo "Setting inline flags = $sim_inline" 6>&1
+fi
+else
+
+if test "x$cross_compiling" = "xno"; then
+ if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then
+ sim_inline="${default_sim_inline}"
+ if test x"$silent" != x"yes"; then
+ echo "Setting inline flags = $sim_inline" 6>&1
+ fi
+ else
+ sim_inline=""
+ fi
+else
+ sim_inline="-DDEFAULT_INLINE=0"
+fi
+fi
+
+
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+
: ${CONFIG_STATUS=./config.status}
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
projects / thirdparty / binutils-gdb.git / commitdiff
