+2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
+
+ * bfd.c (bfd_update_compression_header): Also write the zlib
+ header if the SHF_COMPRESSED bit cleared..
+ (bfd_check_compression_header): Return the uncompressed size.
+ * compress.c (decompress_contents): Don't skip the zlib header.
+ (bfd_compress_section_contents): Properly handle ELFCOMPRESS_ZLIB,
+ which doesn't have the zlib header.
+ (bfd_init_section_decompress_status): Likewise.
+ (bfd_get_full_section_contents): Updated.
+ (bfd_is_section_compressed): Likewise.
+ (bfd_is_section_compressed_with_header): Return the uncompressed
+ size.
+ * elf.c (_bfd_elf_make_section_from_shdr): Updated.
+ * bfd-in2.h: Regenerated.
+
2015-05-14 Jiong Wang <jiong.wang@arm.com>
* elfnn-aarch64.c (elfNN_aarch64_relocate_section): Remove overflow
bfd_boolean bfd_check_compression_header
(bfd *abfd, bfd_byte *contents, asection *sec,
- bfd_size_type uncompressed_size);
+ bfd_size_type *uncompressed_size);
int bfd_get_compression_header_size (bfd *abfd, asection *sec);
bfd_boolean bfd_is_section_compressed_with_header
(bfd *abfd, asection *section,
- int *compression_header_size_p);
+ int *compression_header_size_p,
+ bfd_size_type *uncompressed_size_p);
bfd_boolean bfd_is_section_compressed
(bfd *abfd, asection *section);
}
}
else
- /* Clear the SHF_COMPRESSED bit. */
- elf_section_flags (sec) &= ~SHF_COMPRESSED;
+ {
+ /* Clear the SHF_COMPRESSED bit. */
+ elf_section_flags (sec) &= ~SHF_COMPRESSED;
+
+ /* Write the zlib header. It should be "ZLIB" followed by
+ the uncompressed section size, 8 bytes in big-endian
+ order. */
+ memcpy (contents, "ZLIB", 4);
+ bfd_putb64 (sec->size, contents + 4);
+ }
}
}
else
SYNOPSIS
bfd_boolean bfd_check_compression_header
(bfd *abfd, bfd_byte *contents, asection *sec,
- bfd_size_type uncompressed_size);
+ bfd_size_type *uncompressed_size);
DESCRIPTION
- Check the compression header at CONTENTS of SEC in ABFD with
- the uncompressed size UNCOMPRESSED_SIZE.
+ Check the compression header at CONTENTS of SEC in ABFD and
+ store the uncompressed size in UNCOMPRESSED_SIZE if the
+ compression header is valid.
RETURNS
Return TRUE if the compression header is valid.
bfd_boolean
bfd_check_compression_header (bfd *abfd, bfd_byte *contents,
asection *sec,
- bfd_size_type uncompressed_size)
+ bfd_size_type *uncompressed_size)
{
if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
&& (elf_section_flags (sec) & SHF_COMPRESSED) != 0)
chdr.ch_size = bfd_get_64 (abfd, &echdr->ch_size);
chdr.ch_addralign = bfd_get_64 (abfd, &echdr->ch_addralign);
}
- return (chdr.ch_type == ELFCOMPRESS_ZLIB
- && chdr.ch_size == uncompressed_size
- && chdr.ch_addralign == 1U << sec->alignment_power);
+ if (chdr.ch_type == ELFCOMPRESS_ZLIB
+ && chdr.ch_addralign == 1U << sec->alignment_power)
+ {
+ *uncompressed_size = chdr.ch_size;
+ return TRUE;
+ }
}
return FALSE;
we first zero the entire z_stream structure and then set the fields
that we need. */
memset (& strm, 0, sizeof strm);
- strm.avail_in = compressed_size - 12;
- strm.next_in = (Bytef*) compressed_buffer + 12;
+ strm.avail_in = compressed_size;
+ strm.next_in = (Bytef*) compressed_buffer;
strm.avail_out = uncompressed_size;
BFD_ASSERT (Z_OK == 0);
bfd_byte *buffer;
bfd_size_type buffer_size;
bfd_boolean decompress;
-#if defined(__GNUC__) && GCC_VERSION < 4007
- /* Work around a GCC uninitialized warning bug fixed in GCC 4.7. */
int zlib_size = 0;
-#else
- int zlib_size;
-#endif
int orig_compression_header_size;
- int compression_header_size
- = bfd_get_compression_header_size (abfd, NULL);
+ bfd_size_type orig_uncompressed_size;
+ int header_size = bfd_get_compression_header_size (abfd, NULL);
bfd_boolean compressed
= bfd_is_section_compressed_with_header (abfd, sec,
- &orig_compression_header_size);
+ &orig_compression_header_size,
+ &orig_uncompressed_size);
+
+ /* Either ELF compression header or the 12-byte, "ZLIB" + 8-byte size,
+ overhead in .zdebug* section. */
+ if (!header_size)
+ header_size = 12;
if (compressed)
{
if (orig_compression_header_size == 0)
{
/* Convert it from .zdebug* section. Get the uncompressed
- size first. */
- zlib_size = uncompressed_size;
- compressed_size = zlib_size + compression_header_size;
- uncompressed_size = bfd_getb64 (uncompressed_buffer + 4);
+ size first. We need to substract the 12-byte overhead in
+ .zdebug* section. Set orig_compression_header_size to
+ the 12-bye overhead. */
+ orig_compression_header_size = 12;
+ zlib_size = uncompressed_size - 12;
}
else
{
- /* Convert it to .zdebug* section. */
+ /* Convert it to .zdebug* section. */
zlib_size = uncompressed_size - orig_compression_header_size;
- compressed_size = zlib_size;
}
+
+ /* Add the header size. */
+ compressed_size = zlib_size + header_size;
}
else
- compressed_size = compressBound (uncompressed_size) + 12;
+ compressed_size = compressBound (uncompressed_size) + header_size;
- /* When converting from .zdebug* section, uncompress if it leads to
- smaller size. */
- if (compressed
- && orig_compression_header_size == 0
- && compressed_size > uncompressed_size)
+ /* Uncompress if it leads to smaller size. */
+ if (compressed && compressed_size > orig_uncompressed_size)
{
decompress = TRUE;
- buffer_size = uncompressed_size;
+ buffer_size = orig_uncompressed_size;
}
else
{
decompress = FALSE;
- buffer_size = compressed_size + compression_header_size;
+ buffer_size = compressed_size;
}
buffer = (bfd_byte *) bfd_alloc (abfd, buffer_size);
if (buffer == NULL)
if (compressed)
{
- sec->size = uncompressed_size;
+ sec->size = orig_uncompressed_size;
if (decompress)
{
- if (!decompress_contents (uncompressed_buffer, zlib_size,
- buffer, uncompressed_size))
+ if (!decompress_contents (uncompressed_buffer
+ + orig_compression_header_size,
+ zlib_size, buffer, buffer_size))
{
bfd_set_error (bfd_error_bad_value);
bfd_release (abfd, buffer);
free (uncompressed_buffer);
sec->contents = buffer;
sec->compress_status = COMPRESS_SECTION_DONE;
- return uncompressed_size;
+ return orig_uncompressed_size;
}
else
{
bfd_update_compression_header (abfd, buffer, sec);
- memmove (buffer + compression_header_size,
+ memmove (buffer + header_size,
uncompressed_buffer + orig_compression_header_size,
zlib_size);
}
}
else
{
- bfd_size_type size = uncompressed_size;
- int header_size = 12 + compression_header_size;
if (compress ((Bytef*) buffer + header_size,
&compressed_size,
(const Bytef*) uncompressed_buffer,
/* PR binutils/18087: If compression didn't make the section smaller,
just keep it uncompressed. */
if (compressed_size < uncompressed_size)
- {
- bfd_update_compression_header (abfd, buffer, sec);
-
- /* Write the zlib header. In this case, it should be "ZLIB"
- followed by the uncompressed section size, 8 bytes in
- big-endian order. */
- memcpy (buffer + compression_header_size, "ZLIB", 4);
- bfd_putb64 (size, buffer + compression_header_size + 4);
- }
+ bfd_update_compression_header (abfd, buffer, sec);
else
{
/* NOTE: There is a small memory leak here since
goto fail_compressed;
compression_header_size = bfd_get_compression_header_size (abfd, sec);
+ if (compression_header_size == 0)
+ /* Set header size to the zlib header size if it is a
+ SHF_COMPRESSED section. */
+ compression_header_size = 12;
if (!decompress_contents (compressed_buffer + compression_header_size,
sec->compressed_size, p, sz))
{
SYNOPSIS
bfd_boolean bfd_is_section_compressed_with_header
(bfd *abfd, asection *section,
- int *compression_header_size_p);
+ int *compression_header_size_p,
+ bfd_size_type *uncompressed_size_p);
DESCRIPTION
Return @code{TRUE} if @var{section} is compressed. Compression
- header size is returned in @var{compression_header_size_p}. If
+ header size is returned in @var{compression_header_size_p} and
+ uncompressed size is returned in @var{uncompressed_size_p}. If
compression is unsupported, compression header size is returned
- with -1.
+ with -1 and uncompressed size is returned with 0.
*/
bfd_boolean
bfd_is_section_compressed_with_header (bfd *abfd, sec_ptr sec,
- int *compression_header_size_p)
+ int *compression_header_size_p,
+ bfd_size_type *uncompressed_size_p)
{
- bfd_byte header[MAX_COMPRESSION_HEADER_SIZE + 12];
+ bfd_byte header[MAX_COMPRESSION_HEADER_SIZE];
int compression_header_size;
- int header_size = 12;
+ int header_size;
unsigned int saved = sec->compress_status;
bfd_boolean compressed;
compression_header_size = bfd_get_compression_header_size (abfd, sec);
if (compression_header_size > MAX_COMPRESSION_HEADER_SIZE)
abort ();
- header_size += compression_header_size;
+ header_size = compression_header_size ? compression_header_size : 12;
/* Don't decompress the section. */
sec->compress_status = COMPRESS_SECTION_NONE;
- /* Read the zlib header. In this case, it should be "ZLIB" followed
- by the uncompressed section size, 8 bytes in big-endian order. */
- compressed = bfd_get_section_contents (abfd, sec, header, 0,
- header_size)
- && CONST_STRNEQ ((char*) header + compression_header_size,
- "ZLIB");
+ /* Read the header. */
+ if (bfd_get_section_contents (abfd, sec, header, 0, header_size))
+ {
+ if (compression_header_size == 0)
+ /* In this case, it should be "ZLIB" followed by the uncompressed
+ section size, 8 bytes in big-endian order. */
+ compressed = CONST_STRNEQ ((char*) header , "ZLIB");
+ else
+ compressed = TRUE;
+ }
+ else
+ compressed = FALSE;
+ *uncompressed_size_p = sec->size;
if (compressed)
{
if (compression_header_size != 0)
{
- bfd_size_type uncompressed_size
- = bfd_getb64 ((bfd_byte *) header
- + compression_header_size + 4);
if (!bfd_check_compression_header (abfd, header, sec,
- uncompressed_size))
+ uncompressed_size_p))
compression_header_size = -1;
}
/* Check for the pathalogical case of a debug string section that
no uncompressed .debug_str section would ever be big enough to
have the first byte of its (big-endian) size be non-zero. */
else if (strcmp (sec->name, ".debug_str") == 0
- && ISPRINT (header[compression_header_size + 4]))
+ && ISPRINT (header[4]))
compressed = FALSE;
+ else
+ *uncompressed_size_p = bfd_getb64 (header + 4);
}
/* Restore compress_status. */
bfd_is_section_compressed (bfd *abfd, sec_ptr sec)
{
int compression_header_size;
+ bfd_size_type uncompressed_size;
return (bfd_is_section_compressed_with_header (abfd, sec,
- &compression_header_size)
- && compression_header_size >= 0);
+ &compression_header_size,
+ &uncompressed_size)
+ && compression_header_size >= 0
+ && uncompressed_size > 0);
}
/*
bfd_boolean
bfd_init_section_decompress_status (bfd *abfd, sec_ptr sec)
{
- bfd_byte header[MAX_COMPRESSION_HEADER_SIZE + 12];
+ bfd_byte header[MAX_COMPRESSION_HEADER_SIZE];
int compression_header_size;
- int header_size = 12;
+ int header_size;
bfd_size_type uncompressed_size;
compression_header_size = bfd_get_compression_header_size (abfd, sec);
if (compression_header_size > MAX_COMPRESSION_HEADER_SIZE)
abort ();
- header_size += compression_header_size;
+ header_size = compression_header_size ? compression_header_size : 12;
+ /* Read the header. */
if (sec->rawsize != 0
|| sec->contents != NULL
|| sec->compress_status != COMPRESS_SECTION_NONE
return FALSE;
}
- /* Read the zlib header. In this case, it should be "ZLIB" followed
- by the uncompressed section size, 8 bytes in big-endian order. */
- if (! CONST_STRNEQ ((char*) header + compression_header_size, "ZLIB"))
+ if (compression_header_size == 0)
{
- bfd_set_error (bfd_error_wrong_format);
- return FALSE;
+ /* In this case, it should be "ZLIB" followed by the uncompressed
+ section size, 8 bytes in big-endian order. */
+ if (! CONST_STRNEQ ((char*) header, "ZLIB"))
+ {
+ bfd_set_error (bfd_error_wrong_format);
+ return FALSE;
+ }
+ uncompressed_size = bfd_getb64 (header + 4);
}
-
- uncompressed_size = bfd_getb64 (header + compression_header_size + 4);
- if (compression_header_size != 0
- && !bfd_check_compression_header (abfd, header, sec,
- uncompressed_size))
+ else if (!bfd_check_compression_header (abfd, header, sec,
+ &uncompressed_size))
{
bfd_set_error (bfd_error_wrong_format);
return FALSE;
}
+
sec->compressed_size = sec->size;
sec->size = uncompressed_size;
sec->compress_status = DECOMPRESS_SECTION_SIZED;
{
enum { nothing, compress, decompress } action = nothing;
int compression_header_size;
+ bfd_size_type uncompressed_size;
bfd_boolean compressed
= bfd_is_section_compressed_with_header (abfd, newsect,
- &compression_header_size);
+ &compression_header_size,
+ &uncompressed_size);
if (compressed)
{
if (newsect->size != 0
&& (abfd->flags & BFD_COMPRESS)
&& compression_header_size >= 0
+ && uncompressed_size > 0
&& (!compressed
|| ((compression_header_size > 0)
!= ((abfd->flags & BFD_COMPRESS_GABI) != 0))))
+2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
+
+ * readelf.c (uncompress_section_contents): Add a parameter for
+ uncompressed size. Don't check the zlib header.
+ (load_specific_debug_section): Updated.
+
2015-05-13 H.J. Lu <hongjiu.lu@intel.com>
* elfedit.c (elf_class): Return ELF_CLASS_BOTH by default.
static int
uncompress_section_contents (unsigned char **buffer,
+ dwarf_size_type uncompressed_size,
dwarf_size_type *size)
{
dwarf_size_type compressed_size = *size;
unsigned char * compressed_buffer = *buffer;
- dwarf_size_type uncompressed_size;
unsigned char * uncompressed_buffer;
z_stream strm;
int rc;
- dwarf_size_type header_size = 12;
-
- /* Read the zlib header. In this case, it should be "ZLIB" followed
- by the uncompressed section size, 8 bytes in big-endian order. */
- if (compressed_size < header_size
- || ! streq ((char *) compressed_buffer, "ZLIB"))
- return 0;
-
- uncompressed_size = compressed_buffer[4]; uncompressed_size <<= 8;
- uncompressed_size += compressed_buffer[5]; uncompressed_size <<= 8;
- uncompressed_size += compressed_buffer[6]; uncompressed_size <<= 8;
- uncompressed_size += compressed_buffer[7]; uncompressed_size <<= 8;
- uncompressed_size += compressed_buffer[8]; uncompressed_size <<= 8;
- uncompressed_size += compressed_buffer[9]; uncompressed_size <<= 8;
- uncompressed_size += compressed_buffer[10]; uncompressed_size <<= 8;
- uncompressed_size += compressed_buffer[11];
/* It is possible the section consists of several compressed
buffers concatenated together, so we uncompress in a loop. */
we first zero the entire z_stream structure and then set the fields
that we need. */
memset (& strm, 0, sizeof strm);
- strm.avail_in = compressed_size - header_size;
- strm.next_in = (Bytef *) compressed_buffer + header_size;
+ strm.avail_in = compressed_size;
+ strm.next_in = (Bytef *) compressed_buffer;
strm.avail_out = uncompressed_size;
uncompressed_buffer = (unsigned char *) xmalloc (uncompressed_size);
{
unsigned char *start = section->start;
dwarf_size_type size = sec->sh_size;
+ dwarf_size_type uncompressed_size = 0;
if ((sec->sh_flags & SHF_COMPRESSED) != 0)
{
if (chdr.ch_type != ELFCOMPRESS_ZLIB
|| chdr.ch_addralign != sec->sh_addralign)
return 0;
+ uncompressed_size = chdr.ch_size;
start += compression_header_size;
size -= compression_header_size;
}
-
- if (uncompress_section_contents (&start, &size))
+ else if (size > 12 && streq ((char *) start, "ZLIB"))
+ {
+ /* Read the zlib header. In this case, it should be "ZLIB"
+ followed by the uncompressed section size, 8 bytes in
+ big-endian order. */
+ uncompressed_size = start[4]; uncompressed_size <<= 8;
+ uncompressed_size += start[5]; uncompressed_size <<= 8;
+ uncompressed_size += start[6]; uncompressed_size <<= 8;
+ uncompressed_size += start[7]; uncompressed_size <<= 8;
+ uncompressed_size += start[8]; uncompressed_size <<= 8;
+ uncompressed_size += start[9]; uncompressed_size <<= 8;
+ uncompressed_size += start[10]; uncompressed_size <<= 8;
+ uncompressed_size += start[11];
+ start += 12;
+ size -= 12;
+ }
+
+ if (uncompressed_size
+ && uncompress_section_contents (&start, uncompressed_size,
+ &size))
{
/* Free the compressed buffer, update the section buffer
and the section size if uncompress is successful. */
+2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
+
+ * binutils-all/compress.exp: Replace "$OBJDUMP -s -j .debug_info"
+ with "$OBJDUMP -W".
+ * binutils-all/libdw2-compressedgabi.out: Updated.
+
2015-05-12 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/elfedit-1.d: Also skip x86_64-*-nacl*.
if ![string match "" $got] then {
fail "objcopy ($testname)"
} else {
- set got [remote_exec host "$OBJDUMP -s -j .debug_info
- ${compressedcopyfile}gabi.a" "" "/dev/null" "tmpdir/libdw2-compressedgabi.out"]
+ set got [remote_exec host "$OBJDUMP -W ${compressedcopyfile}gabi.a" "" "/dev/null" "tmpdir/libdw2-compressedgabi.out"]
if { [lindex $got 0] != 0 || ![string match "" [lindex $got 1]] } then {
fail "$testname (reason: unexpected output)"
-#...
- .*ZLIB.*
+In archive tmpdir/dw2-copy-compressedgabi.a:
+
+dw2-1-compressedgabi.o: +file format .*
+
+Contents of the .debug_info section:
+
+ Compilation Unit @ offset 0x0:
+ Length: 0x4e \(32-bit\)
+ Version: 2
+ Abbrev Offset: 0x0
+ Pointer Size: 4
+ <0><b>: Abbrev Number: 1 \(DW_TAG_compile_unit\)
+ <c> DW_AT_stmt_list : 0x0
+ <10> DW_AT_high_pc : 0x.
+ <14> DW_AT_low_pc : 0x.
+ <18> DW_AT_name : file1.txt
+ <22> DW_AT_producer : GNU C 3.3.3
+ <2e> DW_AT_language : 1 \(ANSI C\)
+ <1><2f>: Abbrev Number: 2 \(DW_TAG_subprogram\)
+ <30> DW_AT_external : 1
+ <31> DW_AT_decl_file : 1
+ <32> DW_AT_decl_line : 2
+ <33> DW_AT_name : func_cu1
+ <3c> DW_AT_type : <0x4a>
+ <40> DW_AT_low_pc : 0x.
+ <44> DW_AT_high_pc : 0x.
+ <48> DW_AT_frame_base : 1 byte block: 55 \(DW_OP_reg5 \([^()]*\)\)
+ <1><4a>: Abbrev Number: 3 \(DW_TAG_base_type\)
+ <4b> DW_AT_name : int
+ <4f> DW_AT_byte_size : 4
+ <50> DW_AT_encoding : 5 \(signed\)
+ <1><51>: Abbrev Number: 0
+
+Raw dump of debug contents of section .debug_line:
+
+ Offset: 0x0
+ Length: 62
+ DWARF Version: 2
+ Prologue Length: 35
+ Minimum Instruction Length: 1
+ Initial value of 'is_stmt': 1
+ Line Base: 1
+ Line Range: 1
+ Opcode Base: 16
+
+ Opcodes:
+ Opcode 1 has 0 args
+ Opcode 2 has 1 args
+ Opcode 3 has 1 args
+ Opcode 4 has 1 args
+ Opcode 5 has 1 args
+ Opcode 6 has 0 args
+ Opcode 7 has 0 args
+ Opcode 8 has 0 args
+ Opcode 9 has 1 args
+ Opcode 10 has 0 args
+ Opcode 11 has 0 args
+ Opcode 12 has 1 args
+ Opcode 13 has 0 args
+ Opcode 14 has 0 args
+ Opcode 15 has 0 args
+
+ The Directory Table is empty.
+
+ The File Name Table \(offset 0x.*\):
+ Entry Dir Time Size Name
+ 1 0 0 0 file1.txt
+
+ Line Number Statements:
+ \[0x.*\] Extended opcode 2: set Address to 0x4
+ \[0x.*\] Advance Line by 3 to 4
+ \[0x.*\] Copy
+ \[0x.*\] Copy
+ \[0x.*\] Extended opcode 2: set Address to 0x8
+ \[0x.*\] Extended opcode 1: End of Sequence
+
+
+Contents of the .debug_abbrev section:
+
+ Number TAG \(0x0\)
+ 1 DW_TAG_compile_unit \[has children\]
+ DW_AT_stmt_list DW_FORM_data4
+ DW_AT_high_pc DW_FORM_addr
+ DW_AT_low_pc DW_FORM_addr
+ DW_AT_name DW_FORM_string
+ DW_AT_producer DW_FORM_string
+ DW_AT_language DW_FORM_data1
+ DW_AT value: 0 DW_FORM value: 0
+ 2 DW_TAG_subprogram \[no children\]
+ DW_AT_external DW_FORM_flag
+ DW_AT_decl_file DW_FORM_data1
+ DW_AT_decl_line DW_FORM_data1
+ DW_AT_name DW_FORM_string
+ DW_AT_type DW_FORM_ref4
+ DW_AT_low_pc DW_FORM_addr
+ DW_AT_high_pc DW_FORM_addr
+ DW_AT_frame_base DW_FORM_block1
+ DW_AT value: 0 DW_FORM value: 0
+ 3 DW_TAG_base_type \[no children\]
+ DW_AT_name DW_FORM_string
+ DW_AT_byte_size DW_FORM_data1
+ DW_AT_encoding DW_FORM_data1
+ DW_AT value: 0 DW_FORM value: 0
+
+dw2-2-compressedgabi.o: +file format .*
+
+Contents of the .debug_info section:
+
+ Compilation Unit @ offset 0x0:
+ Length: 0x4e \(32-bit\)
+ Version: 2
+ Abbrev Offset: 0x0
+ Pointer Size: 4
+ <0><b>: Abbrev Number: 1 \(DW_TAG_compile_unit\)
+ <c> DW_AT_stmt_list : 0x0
+ <10> DW_AT_high_pc : 0x4
+ <14> DW_AT_low_pc : 0x0
+ <18> DW_AT_name : file1.txt
+ <22> DW_AT_producer : GNU C 3.3.3
+ <2e> DW_AT_language : 1 \(ANSI C\)
+ <1><2f>: Abbrev Number: 2 \(DW_TAG_subprogram\)
+ <30> DW_AT_external : 1
+ <31> DW_AT_decl_file : 1
+ <32> DW_AT_decl_line : 2
+ <33> DW_AT_name : func_cu2
+ <3c> DW_AT_type : <0x4a>
+ <40> DW_AT_low_pc : 0x0
+ <44> DW_AT_high_pc : 0x4
+ <48> DW_AT_frame_base : 1 byte block: 55 \(DW_OP_reg5 \(.*\)\)
+ <1><4a>: Abbrev Number: 3 \(DW_TAG_base_type\)
+ <4b> DW_AT_name : int
+ <4f> DW_AT_byte_size : 4
+ <50> DW_AT_encoding : 5 \(signed\)
+ <1><51>: Abbrev Number: 0
+
+Raw dump of debug contents of section .debug_line:
+
+ Offset: 0x0
+ Length: 62
+ DWARF Version: 2
+ Prologue Length: 35
+ Minimum Instruction Length: 1
+ Initial value of 'is_stmt': 1
+ Line Base: 1
+ Line Range: 1
+ Opcode Base: 16
+
+ Opcodes:
+ Opcode 1 has 0 args
+ Opcode 2 has 1 args
+ Opcode 3 has 1 args
+ Opcode 4 has 1 args
+ Opcode 5 has 1 args
+ Opcode 6 has 0 args
+ Opcode 7 has 0 args
+ Opcode 8 has 0 args
+ Opcode 9 has 1 args
+ Opcode 10 has 0 args
+ Opcode 11 has 0 args
+ Opcode 12 has 1 args
+ Opcode 13 has 0 args
+ Opcode 14 has 0 args
+ Opcode 15 has 0 args
+
+ The Directory Table is empty.
+
+ The File Name Table \(offset 0x1f\):
+ Entry Dir Time Size Name
+ 1 0 0 0 file1.txt
+
+ Line Number Statements:
+ \[0x0000002d\] Extended opcode 2: set Address to 0x0
+ \[0x00000034\] Advance Line by 3 to 4
+ \[0x00000036\] Copy
+ \[0x00000037\] Copy
+ \[0x00000038\] Extended opcode 2: set Address to 0x4
+ \[0x0000003f\] Extended opcode 1: End of Sequence
+
+
+Contents of the .debug_abbrev section:
+
+ Number TAG \(0x0\)
+ 1 DW_TAG_compile_unit \[has children\]
+ DW_AT_stmt_list DW_FORM_data4
+ DW_AT_high_pc DW_FORM_addr
+ DW_AT_low_pc DW_FORM_addr
+ DW_AT_name DW_FORM_string
+ DW_AT_producer DW_FORM_string
+ DW_AT_language DW_FORM_data1
+ DW_AT value: 0 DW_FORM value: 0
+ 2 DW_TAG_subprogram \[no children\]
+ DW_AT_external DW_FORM_flag
+ DW_AT_decl_file DW_FORM_data1
+ DW_AT_decl_line DW_FORM_data1
+ DW_AT_name DW_FORM_string
+ DW_AT_type DW_FORM_ref4
+ DW_AT_low_pc DW_FORM_addr
+ DW_AT_high_pc DW_FORM_addr
+ DW_AT_frame_base DW_FORM_block1
+ DW_AT value: 0 DW_FORM value: 0
+ 3 DW_TAG_base_type \[no children\]
+ DW_AT_name DW_FORM_string
+ DW_AT_byte_size DW_FORM_data1
+ DW_AT_encoding DW_FORM_data1
+ DW_AT value: 0 DW_FORM value: 0
+
+
+dw2-3-compressedgabi.o: +file format .*
+
+Contents of the .debug_info section:
+
+ Compilation Unit @ offset 0x0:
+ Length: 0x5e \(32-bit\)
+ Version: 2
+ Abbrev Offset: 0x0
+ Pointer Size: 4
+ <0><b>: Abbrev Number: 1 \(DW_TAG_compile_unit\)
+ <c> DW_AT_stmt_list : 0x0
+ <10> DW_AT_high_pc : 0x4
+ <14> DW_AT_low_pc : 0x0
+ <18> DW_AT_name : file1.txt
+ <22> DW_AT_producer : GNU C 3.3.3
+ <2e> DW_AT_language : 1 \(ANSI C\)
+ <1><2f>: Abbrev Number: 2 \(DW_TAG_subprogram\)
+ <30> DW_AT_external : 1
+ <31> DW_AT_decl_file : 1
+ <32> DW_AT_decl_line : 2
+ <33> DW_AT_name : func_cu1
+ <3c> DW_AT_type : <0x85>
+ <40> DW_AT_low_pc : 0x0
+ <44> DW_AT_high_pc : 0x4
+ <48> DW_AT_frame_base : 1 byte block: 55 \(DW_OP_reg5 \([^()]*\)\)
+ <1><4a>: Abbrev Number: 3 \(DW_TAG_base_type\)
+ <4b> DW_AT_name : int1
+ <50> DW_AT_byte_size : 4
+ <51> DW_AT_encoding : 5 \(signed\)
+ <1><52>: Abbrev Number: 4 \(DW_TAG_const_type\)
+ <53> DW_AT_type : <0x4a>
+ <1><57>: Abbrev Number: 5 \(DW_TAG_variable\)
+ <58> DW_AT_name : one
+ <5c> DW_AT_type : <0x52>
+ <60> DW_AT_const_value : 1
+ <1><61>: Abbrev Number: 0
+ Compilation Unit @ offset 0x62:
+ Length: 0x37 \(32-bit\)
+ Version: 2
+ Abbrev Offset: 0x45
+ Pointer Size: 4
+ <0><6d>: Abbrev Number: 1 \(DW_TAG_compile_unit\)
+ <6e> DW_AT_name : file1.txt
+ <78> DW_AT_producer : GNU C 3.3.3
+ <84> DW_AT_language : 1 \(ANSI C\)
+ <1><85>: Abbrev Number: 2 \(DW_TAG_base_type\)
+ <86> DW_AT_name : int2
+ <8b> DW_AT_byte_size : 4
+ <8c> DW_AT_encoding : 5 \(signed\)
+ <1><8d>: Abbrev Number: 3 \(DW_TAG_const_type\)
+ <8e> DW_AT_type : <0x85>
+ <1><92>: Abbrev Number: 4 \(DW_TAG_variable\)
+ <93> DW_AT_name : two
+ <97> DW_AT_type : <0x8d>
+ <9b> DW_AT_const_value : 2
+ <1><9c>: Abbrev Number: 0
+
+Contents of the .debug_abbrev section:
+
+ Number TAG \(0x0\)
+ 1 DW_TAG_compile_unit \[has children\]
+ DW_AT_stmt_list DW_FORM_data4
+ DW_AT_high_pc DW_FORM_addr
+ DW_AT_low_pc DW_FORM_addr
+ DW_AT_name DW_FORM_string
+ DW_AT_producer DW_FORM_string
+ DW_AT_language DW_FORM_data1
+ DW_AT value: 0 DW_FORM value: 0
+ 2 DW_TAG_subprogram \[no children\]
+ DW_AT_external DW_FORM_flag
+ DW_AT_decl_file DW_FORM_data1
+ DW_AT_decl_line DW_FORM_data1
+ DW_AT_name DW_FORM_string
+ DW_AT_type DW_FORM_ref_addr
+ DW_AT_low_pc DW_FORM_addr
+ DW_AT_high_pc DW_FORM_addr
+ DW_AT_frame_base DW_FORM_block1
+ DW_AT value: 0 DW_FORM value: 0
+ 3 DW_TAG_base_type \[no children\]
+ DW_AT_name DW_FORM_string
+ DW_AT_byte_size DW_FORM_data1
+ DW_AT_encoding DW_FORM_data1
+ DW_AT value: 0 DW_FORM value: 0
+ 4 DW_TAG_const_type \[no children\]
+ DW_AT_type DW_FORM_ref4
+ DW_AT value: 0 DW_FORM value: 0
+ 5 DW_TAG_variable \[no children\]
+ DW_AT_name DW_FORM_string
+ DW_AT_type DW_FORM_ref4
+ DW_AT_const_value DW_FORM_data1
+ DW_AT value: 0 DW_FORM value: 0
+ Number TAG \(0x45\)
+ 1 DW_TAG_compile_unit \[has children\]
+ DW_AT_name DW_FORM_string
+ DW_AT_producer DW_FORM_string
+ DW_AT_language DW_FORM_data1
+ DW_AT value: 0 DW_FORM value: 0
+ 2 DW_TAG_base_type \[no children\]
+ DW_AT_name DW_FORM_string
+ DW_AT_byte_size DW_FORM_data1
+ DW_AT_encoding DW_FORM_data1
+ DW_AT value: 0 DW_FORM value: 0
+ 3 DW_TAG_const_type \[no children\]
+ DW_AT_type DW_FORM_ref4
+ DW_AT value: 0 DW_FORM value: 0
+ 4 DW_TAG_variable \[no children\]
+ DW_AT_name DW_FORM_string
+ DW_AT_type DW_FORM_ref4
+ DW_AT_const_value DW_FORM_data1
+ DW_AT value: 0 DW_FORM value: 0
+
+Raw dump of debug contents of section .debug_line:
+
+ Offset: 0x0
+ Length: 62
+ DWARF Version: 2
+ Prologue Length: 35
+ Minimum Instruction Length: 1
+ Initial value of 'is_stmt': 1
+ Line Base: 1
+ Line Range: 1
+ Opcode Base: 16
+
+ Opcodes:
+ Opcode 1 has 0 args
+ Opcode 2 has 1 args
+ Opcode 3 has 1 args
+ Opcode 4 has 1 args
+ Opcode 5 has 1 args
+ Opcode 6 has 0 args
+ Opcode 7 has 0 args
+ Opcode 8 has 0 args
+ Opcode 9 has 1 args
+ Opcode 10 has 0 args
+ Opcode 11 has 0 args
+ Opcode 12 has 1 args
+ Opcode 13 has 0 args
+ Opcode 14 has 0 args
+ Opcode 15 has 0 args
+
+ The Directory Table is empty.
+
+ The File Name Table \(offset 0x1f\):
+ Entry Dir Time Size Name
+ 1 0 0 0 file1.txt
+
+ Line Number Statements:
+ \[0x0000002d\] Extended opcode 2: set Address to 0x0
+ \[0x00000034\] Advance Line by 3 to 4
+ \[0x00000036\] Copy
+ \[0x00000037\] Copy
+ \[0x00000038\] Extended opcode 2: set Address to 0x4
+ \[0x0000003f\] Extended opcode 1: End of Sequence
+
#pass
+2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
+
+ * write.c (compress_debug): Don't write the zlib header, which
+ is handled by bfd_update_compression_header.
+
2015-05-13 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_relax_frag): Allow trampoline to be
int x;
flagword flags = bfd_get_section_flags (abfd, sec);
unsigned int header_size, compression_header_size;
- /* Maximimum compression header is 24 bytes. */
- bfd_byte compression_header[24];
if (seginfo == NULL
|| sec->size < 32
return;
if (flag_compress_debug == COMPRESS_DEBUG_GABI_ZLIB)
- stdoutput->flags |= BFD_COMPRESS | BFD_COMPRESS_GABI;
+ {
+ stdoutput->flags |= BFD_COMPRESS | BFD_COMPRESS_GABI;
+ compression_header_size
+ = bfd_get_compression_header_size (stdoutput, NULL);
+ header_size = compression_header_size;
+ }
else
- stdoutput->flags |= BFD_COMPRESS;
- compression_header_size
- = bfd_get_compression_header_size (stdoutput, NULL);
+ {
+ stdoutput->flags |= BFD_COMPRESS;
+ compression_header_size = 0;
+ header_size = 12;
+ }
- /* Create a new frag to contain the "ZLIB" header. */
- header_size = 12 + compression_header_size;
+ /* Create a new frag to contain the compression header. */
first_newf = frag_alloc (ob);
if (obstack_room (ob) < header_size)
first_newf = frag_alloc (ob);
if (compressed_size >= uncompressed_size)
return;
- if (compression_header_size)
- memcpy (header, compression_header, compression_header_size);
- memcpy (header + compression_header_size, "ZLIB", 4);
- bfd_putb64 (uncompressed_size, header + compression_header_size + 4);
-
/* Replace the uncompressed frag list with the compressed frag list. */
seginfo->frchainP->frch_root = first_newf;
seginfo->frchainP->frch_last = last_newf;
projects / thirdparty / binutils-gdb.git / commitdiff
