+1999-12-07 Jim Blandy <jimb@cygnus.com>
+
+ Add support for SSE registers in core files.
+ * corelow.c (get_core_register_section): New function.
+ (get_core_registers): Fetch the new ".reg-xfp" sections,
+ in addition to the traditional ".reg" and ".reg2" sections.
+ Check for per-thread variants of all three. Use
+ get_core_register_section, instead of writing it out over and over
+ again.
+ * i386-linux-nat.c (i386_linux_fetch_core_registers): New function.
+ (i386_linux_nat_core_fns): New core_fns structure. We do our own
+ core handling now, instead of using the generic code in core-regset.c.
+ (_initialize_i386_linux_nat): New function, needed to register
+ i386_linux_nat_core_fns.
+ * config/i386/linux.mh (NATDEPFILES): Remove core-regset.o;
+ i386-linux-nat.c has its own sniffer now.
+ * gdbcore.h: (struct core_fns): Doc fix.
+
+ * i386v-nat.c (i386_float_info): Definition is #if 0'd; delete it
+ altogether. This should use the function i387-tdep.c.
+
+ Patch from Mark Kettenis <kettenis@gnu.org>:
+
+ * config/i386/tm-i386.h (FLOAT_INFO): New define.
+ * i387-tdep.c (print_i387_value, print_i387_ext,
+ print_i387_status_word, print_i387_control_word, i387_float_info):
+ New functions, used to implement generic `info float' command.
+
1999-12-06 Christopher Faylor <cgf@cygnus.com>
* dcache.c (set_dcache_state): New function.
* ser-pipe.c: Include <string.h> for memset().
+1999-12-01 Jim Blandy <jimb@cygnus.com>
+
+ * gdbtypes.c (builtin_type_v4si, builtin_type_v8qi,
+ builtin_type_v4hi, builtin_type_v2si): New SIMD types.
+ (build_gdbtypes): Initialize them.
+ (_initialize_gdbtypes): Gdbarch_swap them.
+ * gdbtypes.h (builtin_type_v4si, builtin_type_v8qi,
+ builtin_type_v4hi, builtin_type_v2si): Declare them.
+
+ * findvar.c (read_register_bytes, write_register_bytes): Correctly
+ determine how the region the caller is writing overlaps with each
+ register's bytes.
+
+ * value.h (struct value): Doc fixes.
+
+ * valops.c (value_assign): Clarify error message.
+
1999-12-01 Christopher Faylor <cgf@cygnus.com>
* config/i386/tm-cygwin.h: Change tm-i386.h include back to tm-i386v.h.
* stabsread.c: Revert 1999-11-09 Jim Blandy
<jimb@zwingli.cygnus.com> and 1999-11-08 Jim Blandy
- <jimb@zenia.red-bean.com>. Broken on non-Linux targets.
+ <jimb@cygnus.com>. Broken on non-Linux targets.
1999-11-26 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* Makefile.in (i386-tdep.o): Update list of dependencies.
-1999-11-22 Jim Blandy <jimb@zenia.red-bean.com>
+1999-11-22 Jim Blandy <jimb@cygnus.com>
* config/i386/tm-i386v.h (NUM_REGS, REGISTER_NAMES,
REGISTER_BYTES, REGISTER_BYTE, REGISTER_RAW_SIZE,
arguments.
(print_percentage): Make function void.
-1999-11-21 Jim Blandy <jimb@zenia.red-bean.com>
+1999-11-21 Jim Blandy <jimb@cygnus.com>
Make the bcache hash table grow.
* bcache.h (BCACHE_NUM_BUCKETS): Delete definition.
freeing the bcache's obstack directly.
* symfile.c (reread_symbols): Same.
-1999-11-20 Jim Blandy <jimb@zenia.red-bean.com>
+1999-11-20 Jim Blandy <jimb@cygnus.com>
* bcache.c, bcache.h: Rewritten. New version imposes less memory
overhead, and has a more effective hash function, so it's probably
statement.
(info_cb): Use paddr when printing addresses.
-1999-11-08 Jim Blandy <jimb@zenia.red-bean.com>
+1999-11-08 Jim Blandy <jimb@cygnus.com>
* defs.h (ULONGEST_MAX, LONGEST_MAX): New definitions.
* stabsread.c (read_huge_number): Parse and return LONGEST values.
* infcmd.c: Fix typo.
-1999-10-28 Jim Blandy <jimb@zenia.red-bean.com>
+1999-10-28 Jim Blandy <jimb@cygnus.com>
* gdbtypes.c (init_simd_type): The upper bound to
create_range_type is inclusive, not exclusive.
to avoid compiler warnings.
(catch_fork_command_1): Ditto.
-1999-10-20 Jim Blandy <jimb@cris.red-bean.com>
+1999-10-20 Jim Blandy <jimb@cygnus.com>
* Makefile.in (dwarf2read.o): Note that this depends on bfd/elf-bfd.h.
(elf_bfd_h): New variable.
-1999-10-19 Jim Blandy <jimb@zenia.red-bean.com>
+1999-10-19 Jim Blandy <jimb@cygnus.com>
* config/i386/tm-i386.h (REGISTER_NAMES): Change names of FPU
instruction and operand pointer registers to improve consistency,
chunk/block write a run-time option. Check for quit_flag.
Use target_write_memory_partial for downloads.
-1999-10-18 Jim Blandy <jimb@zenia.red-bean.com>
+1999-10-18 Jim Blandy <jimb@cygnus.com>
Change Linux x86 register support to use the new tm-i386.h layout.
* config/i386/tm-linux.h (HAVE_I387_REGS): #define this, so we get
(generic_load): Don't cast the result of bfd_get_section_name.
Replace ``sect'' with ``sect_name'', use consistently.
-1999-10-15 Jim Blandy <jimb@zenia.red-bean.com>
+1999-10-15 Jim Blandy <jimb@cygnus.com>
Add beginnings of support for SIMD register types.
* gdbtypes.c (init_simd_type): New function for building
(_initialize_dcache): Fix description of ``set remotecache''.
Cache is OFF by default.
-1999-10-13 Jim Blandy <jimb@zenia.red-bean.com>
+1999-10-13 Jim Blandy <jimb@cygnus.com>
* valops.c (value_push): Don't forget to initialize container_len.
* config/pa/tm-hppa.h (SYMBOLS_CAN_START_WITH_DOLLAR): It's not
enough to #define this; you have to give it a non-zero value.
-1999-10-11 Jim Blandy <jimb@zenia.red-bean.com>
+1999-10-11 Jim Blandy <jimb@cygnus.com>
Fix from Jim Kingdon <kingdon@redhat.com>, with tweaks to make it
gdbarch- and bigendian-friendly:
remote.c, top.c, tracepoint.c, utils.c (async_p): Change var name
to event_loop_p.
-1999-09-28 Jim Blandy <jimb@cris.red-bean.com>
+1999-09-28 Jim Blandy <jimb@cygnus.com>
* hppa-tdep.c (skip_prologue_hard_way): Recognize ldo insns
which generate pointers into the argument list.
* breakpoints.c (delete_command): Move declaration from here.
* breakpoints.h (delete_command): To here.
-1999-09-18 Jim Blandy <jimb@cris.red-bean.com>
+1999-09-18 Jim Blandy <jimb@cygnus.com>
* hppa-tdep.c (in_solib_call_trampoline): If we can't recognize
the instruction we're at, we're not in a stub.
(inferior_event_handler): New function. Smarter inferior event
handling.
-1999-09-18 Jim Blandy <jimb@cris.red-bean.com>
+1999-09-18 Jim Blandy <jimb@cygnus.com>
* pa64solib.c (pa64_solib_create_inferior_hook): Remove code which
tries to set __d_pid; it's not relevant to PA64 shared libraries.
* breakpoint.c (permanent_breakpoint_here_p): Delete.
Accidentally left over from previous changes.
-1999-09-17 Jim Blandy <jimb@cris.red-bean.com>
+1999-09-17 Jim Blandy <jimb@cygnus.com>
* config/pa/tm-hppa64.h (ARGS_GROW_DOWNWARD): Deleted. There are
many more differences between the 32- and 64-bit ABI's than the
* remote-d10v.c: Remove.
* config/d10v/d10v.mt (TDEPFILES): Remove remote-d10v.o.
-1999-09-15 Jim Blandy <jimb@cris.red-bean.com>
+1999-09-15 Jim Blandy <jimb@cygnus.com>
* breakpoint.c (remove_breakpoint): Return zero, not nothing.
-1999-09-14 Jim Blandy <jimb@cris.red-bean.com>
+1999-09-14 Jim Blandy <jimb@cygnus.com>
* hppa-tdep.c (frame_chain): If the unwind info says we've saved
r3, don't trust it. Call get_frame_saved_regs and see if we can
* remote-st.c (connect_command), remote-os9k.c (connect_command):
Fix. Call FD_SET et.al. with FD instead of serial_t.
-1999-09-14 Jim Blandy <jimb@cris.red-bean.com>
+1999-09-14 Jim Blandy <jimb@cygnus.com>
* hppa-tdep.c (hppa_frame_find_saved_regs): The two possible
instructions for saving the return pointer (32- and 64-bit) save
Mon Sep 13 17:51:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
- From 1999-09-12 Jim Blandy <jimb@cris.red-bean.com>:
+ From 1999-09-12 Jim Blandy <jimb@cygnus.com>:
* gdbarch.sh (generating setters): Use sed to generate the proper
indentation, not tr; tr's behavior is notoriously unportable.
to a CORE_ADDR look like an subtraction expression.
(add_symbol_file_command): Ditto.
-1999-07-30 Jim Blandy <jimb@cris.red-bean.com>
+1999-07-30 Jim Blandy <jimb@cygnus.com>
* hppa-tdep.c (pa_print_registers): Frob register output some more.
-1999-07-29 Jim Blandy <jimb@cris.red-bean.com>
+1999-07-29 Jim Blandy <jimb@cygnus.com>
* config/pa/nm-hppah.h (PTRACE_ARG3_TYPE): After more
consideration, make this a CORE_ADDR, like WDB did.
* hppah-nat.c (child_xfer_memory): Correctly compute mask to round
address to an int boundary.
-1999-07-29 Jim Blandy <jimb@savonarola.red-bean.com>
+1999-07-29 Jim Blandy <jimb@cygnus.com>
Change from Ian Lance Taylor <ian@zembu.com>. The
i386_linux_sigtramp* functions should be moved to
(i386_linux_sigtramp_saved_pc): Likewise.
(i386_linux_sigtramp_saved_sp): Likewise.
-1999-07-28 Jim Blandy <jimb@savonarola.red-bean.com>
+1999-07-28 Jim Blandy <jimb@cygnus.com>
* infrun.c (handle_inferior_event): Don't try to use the code for
stepping over a function call to also handle stepping out of a
from readline the same way as a multiline command. This avoids
missing detecting when the user presses just 'enter'.
-1999-07-28 Jim Blandy <jimb@savonarola.red-bean.com>
+1999-07-28 Jim Blandy <jimb@cygnus.com>
Provide more sanity checking:
* infrun.c (handle_inferior_event): Before assigning a new
* remote.c (_initialize_remote): "remotebreak" should be a var_boolean.
-1999-07-15 Jim Blandy <jimb@cris.red-bean.com>
+1999-07-15 Jim Blandy <jimb@cygnus.com>
Make the output from "info registers" fit withinin 80 columns.
* hppa-tdep.c (pa_print_registers): Make it easy to change row and
ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-VERSION = 19991206
+VERSION = 19991207
DIST=gdb
LINT=/usr/5bin/lint
NAT_FILE= nm-linux.h
NATDEPFILES= infptrace.o solib.o inftarg.o fork-child.o corelow.o \
- core-aout.o core-regset.o i386v-nat.o i386-linux-nat.o linux-thread.o
+ core-aout.o i386v-nat.o i386-linux-nat.o linux-thread.o
double_to_i387((char *)&val, (TO)); \
}
+/* Print out the i387 floating point state. */
+#ifdef HAVE_I387_REGS
+extern void i387_float_info (void);
+#define FLOAT_INFO { i387_float_info (); }
+#endif
+
+\f
/* Store the address of the place in which to copy the structure the
subroutine will return. This is called from call_function. */
printf_filtered ("No core file now.\n");
}
+
+/* Try to retrieve registers from a section in core_bfd, and supply
+ them to core_vec->core_read_registers, as the register set numbered
+ WHICH.
+
+ If inferior_pid is zero, do the single-threaded thing: look for a
+ section named NAME. If inferior_pid is non-zero, do the
+ multi-threaded thing: look for a section named "NAME/PID", where
+ PID is the shortest ASCII decimal representation of inferior_pid.
+
+ HUMAN_NAME is a human-readable name for the kind of registers the
+ NAME section contains, for use in error messages.
+
+ If REQUIRED is non-zero, print an error if the core file doesn't
+ have a section by the appropriate name. Otherwise, just do nothing. */
+
+static void
+get_core_register_section (char *name,
+ int which,
+ char *human_name,
+ int required)
+{
+ char section_name[100];
+ sec_ptr section;
+ bfd_size_type size;
+ char *contents;
+
+ if (inferior_pid)
+ sprintf (section_name, "%s/%d", name, inferior_pid);
+ else
+ strcpy (section_name, name);
+
+ section = bfd_get_section_by_name (core_bfd, section_name);
+ if (! section)
+ {
+ if (required)
+ warning ("Couldn't find %s registers in core file.\n", human_name);
+ return;
+ }
+
+ size = bfd_section_size (core_bfd, section);
+ contents = alloca (size);
+ if (! bfd_get_section_contents (core_bfd, section, contents,
+ (file_ptr) 0, size))
+ {
+ warning ("Couldn't read %s registers from `%s' section in core file.\n",
+ human_name, name);
+ return;
+ }
+
+ core_vec->core_read_registers (contents, size, which,
+ ((CORE_ADDR)
+ bfd_section_vma (core_bfd, section)));
+}
+
+
/* Get the registers out of a core file. This is the machine-
independent part. Fetch_core_registers is the machine-dependent
part, typically implemented in the xm-file for each architecture. */
get_core_registers (regno)
int regno;
{
- sec_ptr reg_sec;
- unsigned size;
- char *the_regs;
- char secname[30];
+ int status;
- if (core_vec == NULL)
+ if (core_vec == NULL
+ || core_vec->core_read_registers == NULL)
{
fprintf_filtered (gdb_stderr,
"Can't fetch registers from this type of core file\n");
return;
}
- /* Thread support. If inferior_pid is non-zero, then we have found a core
- file with threads (or multiple processes). In that case, we need to
- use the appropriate register section, else we just use `.reg'. */
+ get_core_register_section (".reg", 0, "general-purpose", 1);
+ get_core_register_section (".reg2", 2, "floating-point", 0);
+ get_core_register_section (".reg-xfp", 3, "extended floating-point", 0);
- /* XXX - same thing needs to be done for floating-point (.reg2) sections. */
-
- if (inferior_pid)
- sprintf (secname, ".reg/%d", inferior_pid);
- else
- strcpy (secname, ".reg");
-
- reg_sec = bfd_get_section_by_name (core_bfd, secname);
- if (!reg_sec)
- goto cant;
- size = bfd_section_size (core_bfd, reg_sec);
- the_regs = alloca (size);
- if (bfd_get_section_contents (core_bfd, reg_sec, the_regs, (file_ptr) 0, size) &&
- core_vec->core_read_registers != NULL)
- {
- (core_vec->core_read_registers (the_regs, size, 0,
- (unsigned) bfd_section_vma (abfd, reg_sec)));
- }
- else
- {
- cant:
- fprintf_filtered (gdb_stderr,
- "Couldn't fetch registers from core file: %s\n",
- bfd_errmsg (bfd_get_error ()));
- }
-
- /* Now do it again for the float registers, if they exist. */
- reg_sec = bfd_get_section_by_name (core_bfd, ".reg2");
- if (reg_sec)
- {
- size = bfd_section_size (core_bfd, reg_sec);
- the_regs = alloca (size);
- if (bfd_get_section_contents (core_bfd, reg_sec, the_regs, (file_ptr) 0, size) &&
- core_vec->core_read_registers != NULL)
- {
- (core_vec->core_read_registers (the_regs, size, 2,
- (unsigned) bfd_section_vma (abfd, reg_sec)));
- }
- else
- {
- fprintf_filtered (gdb_stderr,
- "Couldn't fetch register set 2 from core file: %s\n",
- bfd_errmsg (bfd_get_error ()));
- }
- }
registers_fetched ();
}
CORE_REG_SIZE is the size of that area.
- WHICH says which set of registers we are handling (0 = int, 2 = float on
- machines where they are discontiguous).
+ WHICH says which set of registers we are handling:
+ 0 --- integer registers
+ 2 --- floating-point registers, on machines where they are
+ discontiguous
+ 3 --- extended floating-point registers, on machines where
+ these are present in yet a third area. (GNU/Linux uses
+ this to get at the SSE registers.)
REG_ADDR is the offset from u.u_ar0 to the register values relative to
core_reg_sect. This is used with old-fashioned core files to locate the
registers in a large upage-plus-stack ".reg" section. Original upage
address X is at location core_reg_sect+x+reg_addr. */
- void (*core_read_registers) PARAMS ((char *core_reg_sect, unsigned core_reg_size,
+ void (*core_read_registers) PARAMS ((char *core_reg_sect,
+ unsigned core_reg_size,
int which, CORE_ADDR reg_addr));
/* Finds the next struct core_fns. They are allocated and initialized
{
return (blockend + 4 * regmap[regnum]);
}
-/* start-sanitize-ia64 */
-#elif defined(IA64_GNULINUX_TARGET)
-#undef NUM_FREGS
-#define NUM_FREGS 0
-
-#include <asm/ptrace_offsets.h>
-
-static int u_offsets[] =
- {
- /* general registers */
- -1, /* gr0 not available; i.e, it's always zero */
- PT_R1,
- PT_R2,
- PT_R3,
- PT_R4,
- PT_R5,
- PT_R6,
- PT_R7,
- PT_R8,
- PT_R9,
- PT_R10,
- PT_R11,
- PT_R12,
- PT_R13,
- PT_R14,
- PT_R15,
- PT_R16,
- PT_R17,
- PT_R18,
- PT_R19,
- PT_R20,
- PT_R21,
- PT_R22,
- PT_R23,
- PT_R24,
- PT_R25,
- PT_R26,
- PT_R27,
- PT_R28,
- PT_R29,
- PT_R30,
- PT_R31,
- /* gr32 through gr127 not directly available via the ptrace interface */
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- /* Floating point registers */
- -1, -1, /* f0 and f1 not available (f0 is +0.0 and f1 is +1.0) */
- PT_F2,
- PT_F3,
- PT_F4,
- PT_F5,
- PT_F6,
- PT_F7,
- PT_F8,
- PT_F9,
- PT_F10,
- PT_F11,
- PT_F12,
- PT_F13,
- PT_F14,
- PT_F15,
- PT_F16,
- PT_F17,
- PT_F18,
- PT_F19,
- PT_F20,
- PT_F21,
- PT_F22,
- PT_F23,
- PT_F24,
- PT_F25,
- PT_F26,
- PT_F27,
- PT_F28,
- PT_F29,
- PT_F30,
- PT_F31,
- PT_F32,
- PT_F33,
- PT_F34,
- PT_F35,
- PT_F36,
- PT_F37,
- PT_F38,
- PT_F39,
- PT_F40,
- PT_F41,
- PT_F42,
- PT_F43,
- PT_F44,
- PT_F45,
- PT_F46,
- PT_F47,
- PT_F48,
- PT_F49,
- PT_F50,
- PT_F51,
- PT_F52,
- PT_F53,
- PT_F54,
- PT_F55,
- PT_F56,
- PT_F57,
- PT_F58,
- PT_F59,
- PT_F60,
- PT_F61,
- PT_F62,
- PT_F63,
- PT_F64,
- PT_F65,
- PT_F66,
- PT_F67,
- PT_F68,
- PT_F69,
- PT_F70,
- PT_F71,
- PT_F72,
- PT_F73,
- PT_F74,
- PT_F75,
- PT_F76,
- PT_F77,
- PT_F78,
- PT_F79,
- PT_F80,
- PT_F81,
- PT_F82,
- PT_F83,
- PT_F84,
- PT_F85,
- PT_F86,
- PT_F87,
- PT_F88,
- PT_F89,
- PT_F90,
- PT_F91,
- PT_F92,
- PT_F93,
- PT_F94,
- PT_F95,
- PT_F96,
- PT_F97,
- PT_F98,
- PT_F99,
- PT_F100,
- PT_F101,
- PT_F102,
- PT_F103,
- PT_F104,
- PT_F105,
- PT_F106,
- PT_F107,
- PT_F108,
- PT_F109,
- PT_F110,
- PT_F111,
- PT_F112,
- PT_F113,
- PT_F114,
- PT_F115,
- PT_F116,
- PT_F117,
- PT_F118,
- PT_F119,
- PT_F120,
- PT_F121,
- PT_F122,
- PT_F123,
- PT_F124,
- PT_F125,
- PT_F126,
- PT_F127,
- /* predicate registers - we don't fetch these individually */
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- /* branch registers */
- PT_B0,
- PT_B1,
- PT_B2,
- PT_B3,
- PT_B4,
- PT_B5,
- PT_B6,
- PT_B7,
- /* virtual frame pointer and virtual return address pointer */
- -1, -1,
- /* other registers */
- PT_PR,
- PT_CR_IIP,
- PT_CR_IPSR,
- /* kernel registers not visible via ptrace interface (?) */
- -1, -1, -1, -1, -1, -1, -1, -1,
- /* hole */
- -1, -1, -1, -1, -1, -1, -1, -1,
- PT_AR_RSC,
- PT_AR_BSP,
- PT_AR_BSPSTORE,
- PT_AR_RNAT,
- -1,
- -1, /* Not available: FCR, IA32 floating control register */
- -1, -1,
- -1, /* Not available: EFLAG */
- -1, /* Not available: CSD */
- -1, /* Not available: SSD */
- -1, /* Not available: CFLG */
- -1, /* Not available: FSR */
- -1, /* Not available: FIR */
- -1, /* Not available: FDR */
- -1,
- PT_AR_CCV,
- -1, -1, -1,
- PT_AR_UNAT,
- -1, -1, -1,
- PT_AR_FPSR,
- -1, -1, -1,
- -1, /* Not available: ITC */
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1,
- PT_CR_IFS, /* was PT_AR_PFS, but it seemed bogus */
- PT_AR_LC,
- -1, /* Not available: EC, the Epilog Count register */
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1,
- };
-
-int
-ia64_register_u_addr (int blockend, int regnum)
-{
- int addr;
-
- if (regnum < 0 || regnum >= NUM_REGS)
- error ("Invalid register number %d.", regnum);
-
- addr = u_offsets[regnum];
- if (addr == -1)
- addr = 0;
-
- return addr;
-}
-
-initialize_arch()
-{
- return;
-}
-/* end-sanitize-ia64 */
#endif
CORE_ADDR
}
+\f
+/* Interpreting register set info found in core files. */
+
+/* Provide registers to GDB from a core file.
+
+ (We can't use the generic version of this function in
+ core-regset.c, because Linux has *three* different kinds of
+ register set notes. core-regset.c would have to call
+ supply_xfpregset, which most platforms don't have.)
+
+ CORE_REG_SECT points to an array of bytes, which are the contents
+ of a `note' from a core file which BFD thinks might contain
+ register contents. CORE_REG_SIZE is its size.
+
+ WHICH says which register set corelow suspects this is:
+ 0 --- the general register set, in gregset format
+ 2 --- the floating-point register set, in fpregset format
+ 3 --- the extended floating-point register set, in struct
+ user_xfpregs_struct format
+
+ DUMMY isn't used on Linux. */
+static void
+i386_linux_fetch_core_registers (char *core_reg_sect,
+ unsigned core_reg_size,
+ int which,
+ CORE_ADDR dummy)
+{
+ gregset_t gregset;
+ fpregset_t fpregset;
+
+ switch (which)
+ {
+ case 0:
+ if (core_reg_size != sizeof (gregset))
+ warning ("wrong size gregset struct in core file");
+ else
+ {
+ memcpy (&gregset, core_reg_sect, sizeof (gregset));
+ supply_gregset (&gregset);
+ }
+ break;
+
+ case 2:
+ if (core_reg_size != sizeof (fpregset))
+ warning ("wrong size fpregset struct in core file");
+ else
+ {
+ memcpy (&fpregset, core_reg_sect, sizeof (fpregset));
+ supply_fpregset (&fpregset);
+ }
+ break;
+
+#ifdef HAVE_PTRACE_GETXFPREGS
+ {
+ struct user_xfpregs_struct xfpregset;
+ case 3:
+ if (core_reg_size != sizeof (struct user_xfpregs_struct))
+ warning ("wrong size user_xfpregs_struct in core file");
+ else
+ {
+ memcpy (&xfpregset, core_reg_sect, sizeof (xfpregset));
+ supply_xfpregset (&xfpregset);
+ }
+ break;
+ }
+#endif
+
+ default:
+ /* We've covered all the kinds of registers we know about here,
+ so this must be something we wouldn't know what to do with
+ anyway. Just ignore it. */
+ break;
+ }
+}
+
+
+static struct core_fns i386_linux_nat_core_fns =
+{
+ bfd_target_elf_flavour, /* core_flavour */
+ default_check_format, /* check_format */
+ default_core_sniffer, /* core_sniffer */
+ i386_linux_fetch_core_registers, /* core_read_registers */
+ NULL /* next */
+};
+
\f
/* Calling functions in shared libraries. */
return 0;
}
+
+
+\f
+/* Module initialization. */
+
+void
+_initialize_i386_linux_nat ()
+{
+ add_core_fns (&i386_linux_nat_core_fns);
+}
}
#endif /* TARGET_HAS_HARDWARE_WATCHPOINTS */
-
-#if 0
-/* using FLOAT_INFO as is would be a problem. FLOAT_INFO is called
- via a command xxx and eventually calls ptrace without ever having
- traversed the target vector. This would be terribly impolite
- behaviour for a sun4 hosted remote gdb.
-
- A fix might be to move this code into the "info registers" command.
- rich@cygnus.com 15 Sept 92. */
-i386_float_info ()
-{
- struct user u; /* just for address computations */
- int i;
- /* fpstate defined in <sys/user.h> */
- struct fpstate *fpstatep;
- char buf[sizeof (struct fpstate) + 2 * sizeof (int)];
- unsigned int uaddr;
- char fpvalid = 0;
- unsigned int rounded_addr;
- unsigned int rounded_size;
- extern int corechan;
- int skip;
-
- uaddr = (char *) &u.u_fpvalid - (char *) &u;
- if (target_has_execution)
- {
- unsigned int data;
- unsigned int mask;
-
- rounded_addr = uaddr & -sizeof (int);
- data = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) rounded_addr, 0);
- mask = 0xff << ((uaddr - rounded_addr) * 8);
-
- fpvalid = ((data & mask) != 0);
- }
-#if 0
- else
- {
- if (lseek (corechan, uaddr, 0) < 0)
- perror ("seek on core file");
- if (myread (corechan, &fpvalid, 1) < 0)
- perror ("read on core file");
-
- }
-#endif /* no core support yet */
-
- if (fpvalid == 0)
- {
- printf_unfiltered ("no floating point status saved\n");
- return;
- }
-
- uaddr = (char *) &U_FPSTATE (u) - (char *) &u;
- if (target_has_execution)
- {
- int *ip;
-
- rounded_addr = uaddr & -sizeof (int);
- rounded_size = (((uaddr + sizeof (struct fpstate)) - uaddr) +
- sizeof (int) - 1) / sizeof (int);
- skip = uaddr - rounded_addr;
-
- ip = (int *) buf;
- for (i = 0; i < rounded_size; i++)
- {
- *ip++ = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) rounded_addr, 0);
- rounded_addr += sizeof (int);
- }
- }
-#if 0
- else
- {
- if (lseek (corechan, uaddr, 0) < 0)
- perror_with_name ("seek on core file");
- if (myread (corechan, buf, sizeof (struct fpstate)) < 0)
- perror_with_name ("read from core file");
- skip = 0;
- }
-#endif /* 0 */
-
- fpstatep = (struct fpstate *) (buf + skip);
- print_387_status (fpstatep->status, (struct env387 *) fpstatep->state);
-}
-
-#endif /* never */
/* Intel 387 floating point stuff.
- Copyright (C) 1988, 1989, 1991, 1998 Free Software Foundation, Inc.
+ Copyright (C) 1988, 1989, 1991, 1998, 1999 Free Software Foundation, Inc.
This file is part of GDB.
#include "gdbcore.h"
#include "floatformat.h"
-void i387_to_double PARAMS ((char *, char *));
-void double_to_i387 PARAMS ((char *, char *));
-static void print_387_control_bits PARAMS ((unsigned int control));
-static void print_387_status_bits PARAMS ((unsigned int status));
+/* FIXME: Eliminate the next two functions when we have the time to
+ change all the callers. */
-/* FIXME: Eliminate these routines when we have the time to change all
- the callers. */
+void i387_to_double PARAMS ((char *from, char *to));
+void double_to_i387 PARAMS ((char *from, char *to));
void
i387_to_double (from, to)
floatformat_from_double (&floatformat_i387_ext, (double *) from, to);
}
+\f
+/* FIXME: The functions on this page are used by the old `info float'
+ implementations that a few of the i386 targets provide. These
+ functions should be removed if all of these have been converted to
+ use the generic implementation based on the new register file
+ layout. */
+
+static void print_387_control_bits PARAMS ((unsigned int control));
+static void print_387_status_bits PARAMS ((unsigned int status));
+
static void
print_387_control_bits (control)
unsigned int control;
puts_unfiltered ("\n");
}
+\f
+/* Implement the `info float' layout based on the register definitions
+ in `tm-i386.h'. */
+
+/* Print the floating point number specified by RAW. */
+static void
+print_i387_value (char *raw)
+{
+ DOUBLEST value;
+
+ floatformat_to_doublest (&floatformat_i387_ext, raw, &value);
+
+ /* We try to print 19 digits. The last digit may or may not contain
+ garbage, but we'd better print one too many. We need enough room
+ to print the value, 1 position for the sign, 1 for the decimal
+ point, 19 for the digits and 6 for the exponent adds up to 27. */
+#ifdef PRINTF_HAS_LONG_DOUBLE
+ printf_filtered (" %-+27.19Lg", (long double) value);
+#else
+ printf_filtered (" %-+27.19g", (double) value);
+#endif
+}
+
+/* Print the classification for the register contents RAW. */
+static void
+print_i387_ext (unsigned char *raw)
+{
+ int sign;
+ int integer;
+ unsigned int exponent;
+ unsigned long fraction[2];
+
+ sign = raw[9] & 0x80;
+ integer = raw[7] & 0x80;
+ exponent = (((raw[9] & 0x7f) << 8) | raw[8]);
+ fraction[0] = ((raw[3] << 24) | (raw[2] << 16) | (raw[1] << 8) | raw[0]);
+ fraction[1] = (((raw[7] & 0x7f) << 24) | (raw[6] << 16)
+ | (raw[5] << 8) | raw[4]);
+
+ if (exponent == 0x7fff && integer)
+ {
+ if (fraction[0] == 0x00000000 && fraction[1] == 0x00000000)
+ /* Infinity. */
+ printf_filtered (" %cInf", (sign ? '-' : '+'));
+ else if (sign && fraction[0] == 0x00000000 && fraction[1] == 0x40000000)
+ /* Real Indefinite (QNaN). */
+ puts_unfiltered (" Real Indefinite (QNaN)");
+ else if (fraction[1] & 0x40000000)
+ /* QNaN. */
+ puts_filtered (" QNaN");
+ else
+ /* SNaN. */
+ puts_filtered (" SNaN");
+ }
+ else if (exponent < 0x7fff && exponent > 0x0000 && integer)
+ /* Normal. */
+ print_i387_value (raw);
+ else if (exponent == 0x0000)
+ {
+ /* Denormal or zero. */
+ print_i387_value (raw);
+
+ if (integer)
+ /* Pseudo-denormal. */
+ puts_filtered (" Pseudo-denormal");
+ else if (fraction[0] || fraction[1])
+ /* Denormal. */
+ puts_filtered (" Denormal");
+ }
+ else
+ /* Unsupported. */
+ puts_filtered (" Unsupported");
+}
+
+/* Print the status word STATUS. */
+static void
+print_i387_status_word (unsigned int status)
+{
+ printf_filtered ("Status Word: %s",
+ local_hex_string_custom (status, "04"));
+ puts_filtered (" ");
+ printf_filtered (" %s", (status & 0x0001) ? "IE" : " ");
+ printf_filtered (" %s", (status & 0x0002) ? "DE" : " ");
+ printf_filtered (" %s", (status & 0x0004) ? "ZE" : " ");
+ printf_filtered (" %s", (status & 0x0008) ? "OE" : " ");
+ printf_filtered (" %s", (status & 0x0010) ? "UE" : " ");
+ printf_filtered (" %s", (status & 0x0020) ? "PE" : " ");
+ puts_filtered (" ");
+ printf_filtered (" %s", (status & 0x0080) ? "ES" : " ");
+ puts_filtered (" ");
+ printf_filtered (" %s", (status & 0x0080) ? "SF" : " ");
+ puts_filtered (" ");
+ printf_filtered (" %s", (status & 0x0100) ? "C0" : " ");
+ printf_filtered (" %s", (status & 0x0200) ? "C1" : " ");
+ printf_filtered (" %s", (status & 0x0400) ? "C2" : " ");
+ printf_filtered (" %s", (status & 0x4000) ? "C3" : " ");
+
+ puts_filtered ("\n");
+
+ printf_filtered (" TOP: %d\n", ((status >> 11) & 7));
+}
+
+/* Print the control word CONTROL. */
+static void
+print_i387_control_word (unsigned int control)
+{
+ printf_filtered ("Control Word: %s",
+ local_hex_string_custom (control, "04"));
+ puts_filtered (" ");
+ printf_filtered (" %s", (control & 0x0001) ? "IM" : " ");
+ printf_filtered (" %s", (control & 0x0002) ? "DM" : " ");
+ printf_filtered (" %s", (control & 0x0004) ? "ZM" : " ");
+ printf_filtered (" %s", (control & 0x0008) ? "OM" : " ");
+ printf_filtered (" %s", (control & 0x0010) ? "UM" : " ");
+ printf_filtered (" %s", (control & 0x0020) ? "PM" : " ");
+
+ puts_filtered ("\n");
+
+ puts_filtered (" PC: ");
+ switch ((control >> 8) & 3)
+ {
+ case 0:
+ puts_filtered ("Single Precision (24-bits)\n");
+ break;
+ case 1:
+ puts_filtered ("Reserved\n");
+ break;
+ case 2:
+ puts_filtered ("Double Precision (53-bits)\n");
+ break;
+ case 3:
+ puts_filtered ("Extended Precision (64-bits)\n");
+ break;
+ }
+
+ puts_filtered (" RC: ");
+ switch ((control >> 10) & 3)
+ {
+ case 0:
+ puts_filtered ("Round to nearest\n");
+ break;
+ case 1:
+ puts_filtered ("Round down\n");
+ break;
+ case 2:
+ puts_filtered ("Round up\n");
+ break;
+ case 3:
+ puts_filtered ("Round toward zero\n");
+ break;
+ }
+}
+
+/* Print out the i387 floating poin state. */
+void
+i387_float_info (void)
+{
+ unsigned int fctrl;
+ unsigned int fstat;
+ unsigned int ftag;
+ unsigned int fiseg;
+ unsigned int fioff;
+ unsigned int foseg;
+ unsigned int fooff;
+ unsigned int fop;
+ int fpreg;
+ int top;
+
+ fctrl = read_register (FCTRL_REGNUM);
+ fstat = read_register (FSTAT_REGNUM);
+ ftag = read_register (FTAG_REGNUM);
+ fiseg = read_register (FCS_REGNUM);
+ fioff = read_register (FCOFF_REGNUM);
+ foseg = read_register (FDS_REGNUM);
+ fooff = read_register (FDOFF_REGNUM);
+ fop = read_register (FOP_REGNUM);
+
+ top = ((fstat >> 11) & 7);
+
+ for (fpreg = 7; fpreg >= 0; fpreg--)
+ {
+ unsigned char raw[FPU_REG_RAW_SIZE];
+ int tag = (ftag >> (fpreg * 2)) & 3;
+ int i;
+
+ printf_filtered ("%sR%d: ", fpreg == top ? "=>" : " ", fpreg);
+
+ switch (tag)
+ {
+ case 0:
+ puts_filtered ("Valid ");
+ break;
+ case 1:
+ puts_filtered ("Zero ");
+ break;
+ case 2:
+ puts_filtered ("Special ");
+ break;
+ case 3:
+ puts_filtered ("Empty ");
+ break;
+ }
+
+ read_register_gen ((fpreg + 8 - top) % 8 + FP0_REGNUM, raw);
+
+ puts_filtered ("0x");
+ for (i = 9; i >= 0; i--)
+ printf_filtered ("%02x", raw[i]);
+
+ if (tag != 3)
+ print_i387_ext (raw);
+
+ puts_filtered ("\n");
+ }
+
+ puts_filtered ("\n");
+
+ print_i387_status_word (fstat);
+ print_i387_control_word (fctrl);
+ printf_filtered ("Tag Word: %s\n",
+ local_hex_string_custom (ftag, "04"));
+ printf_filtered ("Instruction Pointer: %s:",
+ local_hex_string_custom (fiseg, "02"));
+ printf_filtered ("%s\n", local_hex_string_custom (fioff, "08"));
+ printf_filtered ("Operand Pointer: %s:",
+ local_hex_string_custom (foseg, "02"));
+ printf_filtered ("%s\n", local_hex_string_custom (fooff, "08"));
+ printf_filtered ("Opcode: %s\n",
+ local_hex_string_custom (fop ? (fop | 0xd800) : 0, "04"));
+}
+
+\f
+/* FIXME: The functions on this page are used to provide `long double'
+ support for Linux. However, the approach does not seem to be the
+ right one, and we are planning to solve this in a way that should
+ work for all i386 targets. These functions will disappear in the
+ near future, so please don't use them. */
#ifdef LD_I387
int
i387_extract_floating (PTR addr, int len, DOUBLEST *dretptr)
+1999-12-06 Jim Blandy <jimb@cygnus.com>
+
+ * gdb.base/default.exp: Expect the new 'info float' command on
+ all i386 platforms.
+
+ * gdb.threads/linux-dp.exp: Expand our ability to recognize
+ LinuxThreads libraries that don't support debugging.
+
Sat Dec 4 15:21:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
* gdb.base/remote.c: Fill the buffer with truely random data.
gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float"
} elseif [istarget "strongarm-*-*"] then {
gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float"
-} elseif [istarget "i\[3456\]86-*-linux-gnu"] then {
- gdb_test "info float" "No registers."
+} elseif [istarget "i\[3456\]86-*-*"] then {
+ gdb_test "info float" "R7:.*Status Word:.*Opcode:.*" "info float"
} else {
gdb_test "info float" "No floating point info available for this processor." "info float"
}
+1999-12-07 Dave Brolley <brolley@cygnus.com>
+
+ * cgen-par.h (CGEN_FN_MEM_QI_WRITE): New enumerator.
+ (CGEN_FN_MEM_HI_WRITE): New enumerator.
+ (CGEN_FN_MEM_SI_WRITE): New enumerator.
+ (CGEN_FN_MEM_DI_WRITE): New enumerator.
+ (CGEN_FN_MEM_DF_WRITE): New enumerator.
+ (CGEN_FN_MEM_XI_WRITE): New enumerator.
+ (fn_mem_qi_write): New union members.
+ (fn_mem_hi_write): New union members.
+ (fn_mem_si_write): New union members.
+ (fn_mem_di_write): New union members.
+ (fn_mem_df_write): New union members.
+ (fn_mem_xi_write): New union members.
+ (sim_queue_fn_mem_qi_write): New function.
+ (sim_queue_fn_mem_hi_write): New function.
+ (sim_queue_fn_mem_si_write): New function.
+ (sim_queue_fn_mem_di_write): New function.
+ (sim_queue_fn_mem_df_write): New function.
+ (sim_queue_fn_mem_xi_write): New function.
+ * cgen-par.c (sim_queue_fn_mem_qi_write): New function.
+ (sim_queue_fn_mem_hi_write): New function.
+ (sim_queue_fn_mem_si_write): New function.
+ (sim_queue_fn_mem_di_write): New function.
+ (sim_queue_fn_mem_df_write): New function.
+ (sim_queue_fn_mem_xi_write): New function.
+ (cgen_write_queue_element_execute): Handle CGEN_FN_MEM_QI_WRITE,
+ CGEN_FN_MEM_HI_WRITE, CGEN_FN_MEM_SI_WRITE, CGEN_FN_MEM_DI_WRITE,
+ CGEN_FN_MEM_DF_WRITE, CGEN_FN_MEM_XI_WRITE.
+
1999-12-01 Dave Brolley <brolley@cygnus.com>
* cgen-accfp.c (subsf): Check status code.
element->kinds.mem_xi_write.value[3] = value[3];
}
+void sim_queue_fn_mem_qi_write (
+ SIM_CPU *cpu,
+ void (*write_function)(SIM_CPU *cpu, IADDR, SI, QI),
+ SI address,
+ QI value
+)
+{
+ CGEN_WRITE_QUEUE *q = CPU_WRITE_QUEUE (cpu);
+ CGEN_WRITE_QUEUE_ELEMENT *element = CGEN_WRITE_QUEUE_NEXT (q);
+ element->kind = CGEN_FN_MEM_QI_WRITE;
+ element->insn_address = CPU_PC_GET (cpu);
+ element->kinds.fn_mem_qi_write.function = write_function;
+ element->kinds.fn_mem_qi_write.address = address;
+ element->kinds.fn_mem_qi_write.value = value;
+}
+
+void sim_queue_fn_mem_hi_write (
+ SIM_CPU *cpu,
+ void (*write_function)(SIM_CPU *cpu, IADDR, SI, HI),
+ SI address,
+ HI value
+)
+{
+ CGEN_WRITE_QUEUE *q = CPU_WRITE_QUEUE (cpu);
+ CGEN_WRITE_QUEUE_ELEMENT *element = CGEN_WRITE_QUEUE_NEXT (q);
+ element->kind = CGEN_FN_MEM_HI_WRITE;
+ element->insn_address = CPU_PC_GET (cpu);
+ element->kinds.fn_mem_hi_write.function = write_function;
+ element->kinds.fn_mem_hi_write.address = address;
+ element->kinds.fn_mem_hi_write.value = value;
+}
+
+void sim_queue_fn_mem_si_write (
+ SIM_CPU *cpu,
+ void (*write_function)(SIM_CPU *cpu, IADDR, SI, SI),
+ SI address,
+ SI value
+)
+{
+ CGEN_WRITE_QUEUE *q = CPU_WRITE_QUEUE (cpu);
+ CGEN_WRITE_QUEUE_ELEMENT *element = CGEN_WRITE_QUEUE_NEXT (q);
+ element->kind = CGEN_FN_MEM_SI_WRITE;
+ element->insn_address = CPU_PC_GET (cpu);
+ element->kinds.fn_mem_si_write.function = write_function;
+ element->kinds.fn_mem_si_write.address = address;
+ element->kinds.fn_mem_si_write.value = value;
+}
+
+void sim_queue_fn_mem_di_write (
+ SIM_CPU *cpu,
+ void (*write_function)(SIM_CPU *cpu, IADDR, SI, DI),
+ SI address,
+ DI value
+)
+{
+ CGEN_WRITE_QUEUE *q = CPU_WRITE_QUEUE (cpu);
+ CGEN_WRITE_QUEUE_ELEMENT *element = CGEN_WRITE_QUEUE_NEXT (q);
+ element->kind = CGEN_FN_MEM_DI_WRITE;
+ element->insn_address = CPU_PC_GET (cpu);
+ element->kinds.fn_mem_di_write.function = write_function;
+ element->kinds.fn_mem_di_write.address = address;
+ element->kinds.fn_mem_di_write.value = value;
+}
+
+void sim_queue_fn_mem_df_write (
+ SIM_CPU *cpu,
+ void (*write_function)(SIM_CPU *cpu, IADDR, SI, DF),
+ SI address,
+ DF value
+)
+{
+ CGEN_WRITE_QUEUE *q = CPU_WRITE_QUEUE (cpu);
+ CGEN_WRITE_QUEUE_ELEMENT *element = CGEN_WRITE_QUEUE_NEXT (q);
+ element->kind = CGEN_FN_MEM_DF_WRITE;
+ element->insn_address = CPU_PC_GET (cpu);
+ element->kinds.fn_mem_df_write.function = write_function;
+ element->kinds.fn_mem_df_write.address = address;
+ element->kinds.fn_mem_df_write.value = value;
+}
+
+void sim_queue_fn_mem_xi_write (
+ SIM_CPU *cpu,
+ void (*write_function)(SIM_CPU *cpu, IADDR, SI, SI *),
+ SI address,
+ SI *value
+)
+{
+ CGEN_WRITE_QUEUE *q = CPU_WRITE_QUEUE (cpu);
+ CGEN_WRITE_QUEUE_ELEMENT *element = CGEN_WRITE_QUEUE_NEXT (q);
+ element->kind = CGEN_FN_MEM_XI_WRITE;
+ element->insn_address = CPU_PC_GET (cpu);
+ element->kinds.fn_mem_xi_write.function = write_function;
+ element->kinds.fn_mem_xi_write.address = address;
+ element->kinds.fn_mem_xi_write.value[0] = value[0];
+ element->kinds.fn_mem_xi_write.value[1] = value[1];
+ element->kinds.fn_mem_xi_write.value[2] = value[2];
+ element->kinds.fn_mem_xi_write.value[3] = value[3];
+}
+
/* Execute a write stored on the write queue. */
void
cgen_write_queue_element_execute (SIM_CPU *cpu, CGEN_WRITE_QUEUE_ELEMENT *item)
SETMEMSI (cpu, pc, item->kinds.mem_xi_write.address + 12,
item->kinds.mem_xi_write.value[3]);
break;
+ case CGEN_FN_MEM_QI_WRITE:
+ pc = item->insn_address;
+ item->kinds.fn_mem_qi_write.function (cpu, pc,
+ item->kinds.fn_mem_qi_write.address,
+ item->kinds.fn_mem_qi_write.value);
+ break;
+ case CGEN_FN_MEM_HI_WRITE:
+ pc = item->insn_address;
+ item->kinds.fn_mem_hi_write.function (cpu, pc,
+ item->kinds.fn_mem_hi_write.address,
+ item->kinds.fn_mem_hi_write.value);
+ break;
+ case CGEN_FN_MEM_SI_WRITE:
+ pc = item->insn_address;
+ item->kinds.fn_mem_si_write.function (cpu, pc,
+ item->kinds.fn_mem_si_write.address,
+ item->kinds.fn_mem_si_write.value);
+ break;
+ case CGEN_FN_MEM_DI_WRITE:
+ pc = item->insn_address;
+ item->kinds.fn_mem_di_write.function (cpu, pc,
+ item->kinds.fn_mem_di_write.address,
+ item->kinds.fn_mem_di_write.value);
+ break;
+ case CGEN_FN_MEM_DF_WRITE:
+ pc = item->insn_address;
+ item->kinds.fn_mem_df_write.function (cpu, pc,
+ item->kinds.fn_mem_df_write.address,
+ item->kinds.fn_mem_df_write.value);
+ break;
+ case CGEN_FN_MEM_XI_WRITE:
+ pc = item->insn_address;
+ item->kinds.fn_mem_xi_write.function (cpu, pc,
+ item->kinds.fn_mem_xi_write.address,
+ item->kinds.fn_mem_xi_write.value);
+ break;
default:
+ abort ();
break; /* FIXME: for now....print message later. */
}
}
CGEN_FN_XI_WRITE, CGEN_FN_PC_WRITE,
CGEN_MEM_QI_WRITE, CGEN_MEM_HI_WRITE, CGEN_MEM_SI_WRITE, CGEN_MEM_DI_WRITE,
CGEN_MEM_DF_WRITE, CGEN_MEM_XI_WRITE,
+ CGEN_FN_MEM_QI_WRITE, CGEN_FN_MEM_HI_WRITE, CGEN_FN_MEM_SI_WRITE,
+ CGEN_FN_MEM_DI_WRITE, CGEN_FN_MEM_DF_WRITE, CGEN_FN_MEM_XI_WRITE,
CGEN_NUM_WRITE_KINDS
};
} mem_di_write;
struct {
SI address;
- DI value;
+ DF value;
} mem_df_write;
struct {
SI address;
SI value[4];
} mem_xi_write;
+ struct {
+ SI address;
+ QI value;
+ void (*function)(SIM_CPU *, IADDR, SI, QI);
+ } fn_mem_qi_write;
+ struct {
+ SI address;
+ HI value;
+ void (*function)(SIM_CPU *, IADDR, SI, HI);
+ } fn_mem_hi_write;
+ struct {
+ SI address;
+ SI value;
+ void (*function)(SIM_CPU *, IADDR, SI, SI);
+ } fn_mem_si_write;
+ struct {
+ SI address;
+ DI value;
+ void (*function)(SIM_CPU *, IADDR, SI, DI);
+ } fn_mem_di_write;
+ struct {
+ SI address;
+ DF value;
+ void (*function)(SIM_CPU *, IADDR, SI, DF);
+ } fn_mem_df_write;
+ struct {
+ SI address;
+ SI value[4];
+ void (*function)(SIM_CPU *, IADDR, SI, SI *);
+ } fn_mem_xi_write;
} kinds;
} CGEN_WRITE_QUEUE_ELEMENT;
extern void sim_queue_mem_df_write (SIM_CPU *, SI, DF);
extern void sim_queue_mem_xi_write (SIM_CPU *, SI, SI *);
+extern void sim_queue_fn_mem_qi_write (SIM_CPU *, void (*)(SIM_CPU *, IADDR, SI, QI), SI, QI);
+extern void sim_queue_fn_mem_hi_write (SIM_CPU *, void (*)(SIM_CPU *, IADDR, SI, HI), SI, HI);
+extern void sim_queue_fn_mem_si_write (SIM_CPU *, void (*)(SIM_CPU *, IADDR, SI, SI), SI, SI);
+extern void sim_queue_fn_mem_di_write (SIM_CPU *, void (*)(SIM_CPU *, IADDR, SI, DI), SI, DI);
+extern void sim_queue_fn_mem_df_write (SIM_CPU *, void (*)(SIM_CPU *, IADDR, SI, DF), SI, DF);
+extern void sim_queue_fn_mem_xi_write (SIM_CPU *, void (*)(SIM_CPU *, IADDR, SI, SI *), SI, SI *);
+
#endif /* CGEN_PAR_H */
* cpu.c,cpu.h: Rebuild.
-start-sanitize-cygnus
-1999-02-12 Doug Evans <devans@casey.cygnus.com>
-
- * Makefile.in (stamp-arch,stamp-cpu,stamp-xcpu): CGEN_MAIN_SCM
- renamed to CGEN_READ_SCM.
-
-end-sanitize-cygnus
1999-02-09 Doug Evans <devans@casey.cygnus.com>
* Makefile.in (SIM_EXTRA_DEPS): Add m32r-desc.h, delete cpu-opc.h.
(stamp-xmloop): s/-parallel/-parallel-write/.
-start-sanitize-cygnus
- (stamp-arch,stamp-cpu): Update FLAGS variable, option syntax changed.
- (stamp-xcpu): Update FLAGS variable, option syntax changed.
-end-sanitize-cygnus
* configure.in (sim_link_files,sim_link_links): Delete.
* configure: Rebuild.
* decode.c,decode.h,model.c,sem-switch.c,sem.c: Rebuild.
1999-01-14 Doug Evans <devans@casey.cygnus.com>
-start-sanitize-cygnus
- * Makefile.in (stamp-arch): Pass FLAGS to cgen.
-end-sanitize-cygnus
* arch.c,arch.h,cpuall.h: Regenerate.
* cpu.c,cpu.h,decode.c,decode.h,model.c,sem-switch.c,sem.c: Regenerate.
* traps.c (sim_engine_invalid_insn): PCADDR->IADDR.
(M32RBF_INCLUDE_DEPS): Use CGEN_MAIN_CPU_DEPS.
(m32r.o,mloop.o,cpu.o,decode.o,sem.o,model.o): Simplify dependencies.
(m32rx.o,mloopx.o,cpux.o,decodex.o,semx.o,modelx.o): Ditto.
-start-sanitize-cygnus
- (stamp-arch): Pass mach=all to cgen-arch.
-end-sanitize-cygnus
* cpu.c,cpu.h,decode.c,model.c,sem-switch.c,sem.c: Regenerate.
* m32r-sim.h (m32rbf_h_cr_[gs]et_handler): Declare.
([GS]ET_H_CR): Define.
* Makefile.in (M32R_OBJS): Delete extract.o.
(extract.o): Delete.
-start-sanitize-cygnus
- (stamp-arch): Depend on $(CGEN_ARCH_SCM).
- (stamp-cpu): Don't build extract.c.
-end-sanitize-cygnus
* cpu.c,cpu.h,decode.c,decode.h,sem-switch.c,sem.c: Rebuild.
* mloop.in (extract16): Update type of `insn' arg.
Delete call to d->extract.
(extract32): Ditto.
-start-sanitize-cygnus
- * Makefile.in (M32RX_OBJS): Delete extractx.o.
- (extractx.o): Delete.
- (stamp-xcpu): Don't build extractx.c.
-end-sanitize-cygnus
* cpux.c,cpux.h,decodex.c,decodex.h,semx-switch.c: Rebuild.
* mloopx.in (extractx16): Update type of `insn' arg.
Delete call to d->extract. Delete arg pbb_p. All callers updated.
* sim-if.c (sim_do_command): Handle "sim info reg {bbpsw,bbpc}".
-start-sanitize-cygnus
-Wed Oct 14 14:49:50 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * Makefile.in (mloop.o): Don't depend on stamp-cpu, depend on
- explicit files.
- (mloopx.o): Ditto for stamp-xcpu.
-
-end-sanitize-cygnus
Fri Oct 9 16:11:58 1998 Doug Evans <devans@seba.cygnus.com>
Add pseudo-basic-block execution support.
(SIM_EXTRA_DEPS): Add include/opcode/cgen.h.
(INCLUDE_DEPS): Delete cpu-sim.h, include/opcode/cgen.h.
(mloop.c): Build pseudo-basic-block version. Depend on stamp-cpu.
-start-sanitize-cygnus
- (stamp-decode): Delete, build decode files with other cpu files.
-end-sanitize-cygnus
* arch.c,arch.h,cpuall.h: Regenerate.
* cpu.c,cpu.h,decode.c,decode.h,extract.c,model.c: Regenerate.
* sem-switch.c,sem.c: Regenerate.
* configure: Regenerate.
* Makefile.in (M32RX_OBJS): Delete semx.o, add extract.o.
(mloopx.c): Build pseudo-basic-block version.
-start-sanitize-cygnus
- Depend on stamp-xcpu.
-end-sanitize-cygnus
(semx.o): Delete.
(extractx.o): Add.
-start-sanitize-cygnus
- (stamp-xdecode): Delete, build decode files with other cpu files.
-end-sanitize-cygnus
* cpux.c,cpux.h,decodex.c,decodex.h,modelx.c: Regenerate.
* readx.c: Delete.
* semx.c: Delete.
Rename cpu m32r to m32rb to distinguish from architecture name.
* Makefile.in (mloop.c): cpu m32r renamed to m32rb.
-start-sanitize-cygnus
- (stamp-cpu): Ditto.
-end-sanitize-cygnus
* sim-main.h (WANT_CPU_M32RB): Renamed from WANT_CPU_M32R.
* tconfig.in (WANT_CPU_M32RB): Ditto.
* m32r.c (WANT_CPU_M32RB): Ditto.
* mloopx.in: Call cycle init/update fns.
* modelx.c: Regenerate.
-start-sanitize-cygnus
-Thu Jun 11 23:39:53 1998 Doug Evans <devans@seba.cygnus.com>
-
- * Makefile.in (stamp-{arch,cpu,decode}): Pass CGEN_FLAGS_TO_PASS
- to recursive makes.
- (stamp-{xcpu,xdecode}): Ditto.
-
-end-sanitize-cygnus
Wed Jun 10 17:39:29 1998 Doug Evans <devans@canuck.cygnus.com>
* traps.c: New file. Trap support moved here from sim-if.c.
* readx.c: Regenerate. Redo computed goto label handling.
* semx.c: Regenerate. Call PROFILE_COUNT_INSN. Finish profiling
support.
-start-sanitize-cygnus
- * Makefile.in (stamp-xcpu): Turn on profiling support.
-end-sanitize-cygnus
* m32r.c (m32r_fetch_register): Change result type and args to
conform to sim_fetch_register interface.
* sim-main.h (sim_cia): Change to USI.
(sim_cpu): Move m32r_misc_profile before machine generated part.
-start-sanitize-cygnus
-Fri May 1 18:25:41 1998 Doug Evans <devans@seba.cygnus.com>
-
- * Makefile.in: Replace @MAINT@ with $(CGEN_MAINT).
- (CGEN_MAINT): New variable.
- * configure.in: Add support for --enable-cgen-maint.
- * configure: Regenerate.
-
-end-sanitize-cygnus
Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* Makefile.in: Update.
* sem-ops.h: Deleted.
* mem-ops.h: Deleted.
-start-sanitize-cygnus
- Add cgen support for generating files.
-end-sanitize-cygnus
(arch): Renamed from CPU.
* cpu.h: New file.
* decode.c: Redone.
m32r-clean:
rm -f mloop.c eng.h stamp-mloop
rm -f mloopx.c engx.h stamp-xmloop
-# start-sanitize-cygnus
- rm -f stamp-arch stamp-cpu stamp-xcpu
-# end-sanitize-cygnus
rm -f tmp-*
-# start-sanitize-cygnus
-# cgen support, enable with --enable-cgen-maint
-CGEN_MAINT = ; @true
-# The following line is commented in or out depending upon --enable-cgen-maint.
-@CGEN_MAINT@CGEN_MAINT =
-
-stamp-arch: $(CGEN_READ_SCM) $(CGEN_ARCH_SCM) $(srccgen)/m32r.cpu
- $(MAKE) cgen-arch $(CGEN_FLAGS_TO_PASS) mach=all \
- FLAGS="with-scache with-profile=fn"
- touch stamp-arch
-arch.h arch.c cpuall.h: $(CGEN_MAINT) stamp-arch
- @true
-
-stamp-cpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(srccgen)/m32r.cpu
- $(MAKE) cgen-cpu-decode $(CGEN_FLAGS_TO_PASS) \
- cpu=m32rbf mach=m32r SUFFIX= \
- FLAGS="with-scache with-profile=fn" \
- EXTRAFILES="$(CGEN_CPU_SEM) $(CGEN_CPU_SEMSW)"
- touch stamp-cpu
-cpu.h sem.c sem-switch.c model.c decode.c decode.h: $(CGEN_MAINT) stamp-cpu
- @true
-
-stamp-xcpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(srccgen)/m32r.cpu
- $(MAKE) cgen-cpu-decode $(CGEN_FLAGS_TO_PASS) \
- cpu=m32rxf mach=m32rx SUFFIX=x FLAGS="with-scache with-profile=fn" EXTRAFILES="$(CGEN_CPU_SEMSW)"
- touch stamp-xcpu
-cpux.h semx-switch.c modelx.c decodex.c decodex.h: $(CGEN_MAINT) stamp-xcpu
- @true
-# end-sanitize-cygnus
projects / thirdparty / binutils-gdb.git / commitdiff
