--- /dev/null
+/* Debug register code for the i386.
+
+ Copyright (C) 2009
+ Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "server.h"
+#include "target.h"
+#include "i386-low.h"
+
+/* Support for 8-byte wide hw watchpoints. */
+#ifndef TARGET_HAS_DR_LEN_8
+/* NOTE: sizeof (long) == 4 on win64. */
+#define TARGET_HAS_DR_LEN_8 (sizeof (void *) == 8)
+#endif
+
+enum target_hw_bp_type
+ {
+ hw_write = 0, /* Common HW watchpoint */
+ hw_read = 1, /* Read HW watchpoint */
+ hw_access = 2, /* Access HW watchpoint */
+ hw_execute = 3 /* Execute HW breakpoint */
+ };
+
+/* DR7 Debug Control register fields. */
+
+/* How many bits to skip in DR7 to get to R/W and LEN fields. */
+#define DR_CONTROL_SHIFT 16
+/* How many bits in DR7 per R/W and LEN field for each watchpoint. */
+#define DR_CONTROL_SIZE 4
+
+/* Watchpoint/breakpoint read/write fields in DR7. */
+#define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */
+#define DR_RW_WRITE (0x1) /* Break on data writes. */
+#define DR_RW_READ (0x3) /* Break on data reads or writes. */
+
+/* This is here for completeness. No platform supports this
+ functionality yet (as of March 2001). Note that the DE flag in the
+ CR4 register needs to be set to support this. */
+#ifndef DR_RW_IORW
+#define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */
+#endif
+
+/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift
+ is so we could OR this with the read/write field defined above. */
+#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */
+#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */
+#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */
+#define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */
+
+/* Local and Global Enable flags in DR7.
+
+ When the Local Enable flag is set, the breakpoint/watchpoint is
+ enabled only for the current task; the processor automatically
+ clears this flag on every task switch. When the Global Enable flag
+ is set, the breakpoint/watchpoint is enabled for all tasks; the
+ processor never clears this flag.
+
+ Currently, all watchpoint are locally enabled. If you need to
+ enable them globally, read the comment which pertains to this in
+ i386_insert_aligned_watchpoint below. */
+#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */
+#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */
+#define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */
+
+/* Local and global exact breakpoint enable flags (a.k.a. slowdown
+ flags). These are only required on i386, to allow detection of the
+ exact instruction which caused a watchpoint to break; i486 and
+ later processors do that automatically. We set these flags for
+ backwards compatibility. */
+#define DR_LOCAL_SLOWDOWN (0x100)
+#define DR_GLOBAL_SLOWDOWN (0x200)
+
+/* Fields reserved by Intel. This includes the GD (General Detect
+ Enable) flag, which causes a debug exception to be generated when a
+ MOV instruction accesses one of the debug registers.
+
+ FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */
+#define DR_CONTROL_RESERVED (0xFC00)
+
+/* Auxiliary helper macros. */
+
+/* A value that masks all fields in DR7 that are reserved by Intel. */
+#define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED)
+
+/* The I'th debug register is vacant if its Local and Global Enable
+ bits are reset in the Debug Control register. */
+#define I386_DR_VACANT(state, i) \
+ (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0)
+
+/* Locally enable the break/watchpoint in the I'th debug register. */
+#define I386_DR_LOCAL_ENABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror |= \
+ (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Globally enable the break/watchpoint in the I'th debug register. */
+#define I386_DR_GLOBAL_ENABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror |= \
+ (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Disable the break/watchpoint in the I'th debug register. */
+#define I386_DR_DISABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror &= \
+ ~(3 << (DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Set in DR7 the RW and LEN fields for the I'th debug register. */
+#define I386_DR_SET_RW_LEN(state, i,rwlen) \
+ do { \
+ (state)->dr_control_mirror &= \
+ ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
+ (state)->dr_control_mirror |= \
+ ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
+ } while (0)
+
+/* Get from DR7 the RW and LEN fields for the I'th debug register. */
+#define I386_DR_GET_RW_LEN(state, i) \
+ (((state)->dr_control_mirror \
+ >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f)
+
+/* Did the watchpoint whose address is in the I'th register break? */
+#define I386_DR_WATCH_HIT(state,i) ((state)->dr_status_mirror & (1 << (i)))
+
+/* A macro to loop over all debug registers. */
+#define ALL_DEBUG_REGISTERS(i) for (i = 0; i < DR_NADDR; i++)
+
+/* Types of operations supported by i386_handle_nonaligned_watchpoint. */
+typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t;
+\f
+/* Implementation. */
+
+/* Clear the reference counts and forget everything we knew about the
+ debug registers. */
+
+void
+i386_low_init_dregs (struct i386_debug_reg_state *state)
+{
+ int i;
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ state->dr_mirror[i] = 0;
+ state->dr_ref_count[i] = 0;
+ }
+ state->dr_control_mirror = 0;
+ state->dr_status_mirror = 0;
+}
+
+/* Print the values of the mirrored debug registers. This is enabled via
+ the "set debug-hw-points 1" monitor command. */
+
+static void
+i386_show_dr (struct i386_debug_reg_state *state,
+ const char *func, CORE_ADDR addr,
+ int len, enum target_hw_bp_type type)
+{
+ int i;
+
+ fprintf (stderr, "%s", func);
+ if (addr || len)
+ fprintf (stderr, " (addr=%lx, len=%d, type=%s)",
+ (unsigned long) addr, len,
+ type == hw_write ? "data-write"
+ : (type == hw_read ? "data-read"
+ : (type == hw_access ? "data-read/write"
+ : (type == hw_execute ? "instruction-execute"
+ /* FIXME: if/when I/O read/write
+ watchpoints are supported, add them
+ here. */
+ : "??unknown??"))));
+ fprintf (stderr, ":\n");
+ fprintf (stderr, "\tCONTROL (DR7): %08x STATUS (DR6): %08x\n",
+ state->dr_control_mirror, state->dr_status_mirror);
+ ALL_DEBUG_REGISTERS (i)
+ {
+ fprintf (stderr, "\
+\tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n",
+ i, paddress (state->dr_mirror[i]),
+ state->dr_ref_count[i],
+ i + 1, paddress (state->dr_mirror[i + 1]),
+ state->dr_ref_count[i + 1]);
+ i++;
+ }
+}
+
+/* Return the value of a 4-bit field for DR7 suitable for watching a
+ region of LEN bytes for accesses of type TYPE. LEN is assumed to
+ have the value of 1, 2, or 4. */
+
+static unsigned
+i386_length_and_rw_bits (int len, enum target_hw_bp_type type)
+{
+ unsigned rw;
+
+ switch (type)
+ {
+ case hw_execute:
+ rw = DR_RW_EXECUTE;
+ break;
+ case hw_write:
+ rw = DR_RW_WRITE;
+ break;
+ case hw_read:
+ /* The i386 doesn't support data-read watchpoints. */
+ case hw_access:
+ rw = DR_RW_READ;
+ break;
+#if 0
+ /* Not yet supported. */
+ case hw_io_access:
+ rw = DR_RW_IORW;
+ break;
+#endif
+ default:
+ error ("\
+Invalid hardware breakpoint type %d in i386_length_and_rw_bits.\n",
+ (int) type);
+ }
+
+ switch (len)
+ {
+ case 1:
+ return (DR_LEN_1 | rw);
+ case 2:
+ return (DR_LEN_2 | rw);
+ case 4:
+ return (DR_LEN_4 | rw);
+ case 8:
+ if (TARGET_HAS_DR_LEN_8)
+ return (DR_LEN_8 | rw);
+ default:
+ error ("\
+Invalid hardware breakpoint length %d in i386_length_and_rw_bits.\n", len);
+ }
+}
+
+/* Insert a watchpoint at address ADDR, which is assumed to be aligned
+ according to the length of the region to watch. LEN_RW_BITS is the
+ value of the bits from DR7 which describes the length and access
+ type of the region to be watched by this watchpoint. Return 0 on
+ success, -1 on failure. */
+
+static int
+i386_insert_aligned_watchpoint (struct i386_debug_reg_state *state,
+ CORE_ADDR addr, unsigned len_rw_bits)
+{
+ int i;
+
+ /* First, look for an occupied debug register with the same address
+ and the same RW and LEN definitions. If we find one, we can
+ reuse it for this watchpoint as well (and save a register). */
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (!I386_DR_VACANT (state, i)
+ && state->dr_mirror[i] == addr
+ && I386_DR_GET_RW_LEN (state, i) == len_rw_bits)
+ {
+ state->dr_ref_count[i]++;
+ return 0;
+ }
+ }
+
+ /* Next, look for a vacant debug register. */
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (I386_DR_VACANT (state, i))
+ break;
+ }
+
+ /* No more debug registers! */
+ if (i >= DR_NADDR)
+ return -1;
+
+ /* Now set up the register I to watch our region. */
+
+ /* Record the info in our local mirrored array. */
+ state->dr_mirror[i] = addr;
+ state->dr_ref_count[i] = 1;
+ I386_DR_SET_RW_LEN (state, i, len_rw_bits);
+ /* Note: we only enable the watchpoint locally, i.e. in the current
+ task. Currently, no i386 target allows or supports global
+ watchpoints; however, if any target would want that in the
+ future, GDB should probably provide a command to control whether
+ to enable watchpoints globally or locally, and the code below
+ should use global or local enable and slow-down flags as
+ appropriate. */
+ I386_DR_LOCAL_ENABLE (state, i);
+ state->dr_control_mirror |= DR_LOCAL_SLOWDOWN;
+ state->dr_control_mirror &= I386_DR_CONTROL_MASK;
+
+ /* Finally, actually pass the info to the inferior. */
+ i386_dr_low_set_addr (state, i);
+ i386_dr_low_set_control (state);
+
+ return 0;
+}
+
+/* Remove a watchpoint at address ADDR, which is assumed to be aligned
+ according to the length of the region to watch. LEN_RW_BITS is the
+ value of the bits from DR7 which describes the length and access
+ type of the region watched by this watchpoint. Return 0 on
+ success, -1 on failure. */
+
+static int
+i386_remove_aligned_watchpoint (struct i386_debug_reg_state *state,
+ CORE_ADDR addr, unsigned len_rw_bits)
+{
+ int i, retval = -1;
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (!I386_DR_VACANT (state, i)
+ && state->dr_mirror[i] == addr
+ && I386_DR_GET_RW_LEN (state, i) == len_rw_bits)
+ {
+ if (--state->dr_ref_count[i] == 0) /* No longer in use? */
+ {
+ /* Reset our mirror. */
+ state->dr_mirror[i] = 0;
+ I386_DR_DISABLE (state, i);
+ /* Reset it in the inferior. */
+ i386_dr_low_set_control (state);
+ i386_dr_low_set_addr (state, i);
+ }
+ retval = 0;
+ }
+ }
+
+ return retval;
+}
+
+/* Insert or remove a (possibly non-aligned) watchpoint, or count the
+ number of debug registers required to watch a region at address
+ ADDR whose length is LEN for accesses of type TYPE. Return 0 on
+ successful insertion or removal, a positive number when queried
+ about the number of registers, or -1 on failure. If WHAT is not a
+ valid value, bombs through internal_error. */
+
+static int
+i386_handle_nonaligned_watchpoint (struct i386_debug_reg_state *state,
+ i386_wp_op_t what, CORE_ADDR addr, int len,
+ enum target_hw_bp_type type)
+{
+ int retval = 0, status = 0;
+ int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4;
+
+ static const int size_try_array[8][8] =
+ {
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */
+ {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */
+ {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */
+ {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */
+ };
+
+ while (len > 0)
+ {
+ int align = addr % max_wp_len;
+ /* Four (eight on AMD64) is the maximum length a debug register
+ can watch. */
+ int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1);
+ int size = size_try_array[try][align];
+
+ if (what == WP_COUNT)
+ {
+ /* size_try_array[] is defined such that each iteration
+ through the loop is guaranteed to produce an address and a
+ size that can be watched with a single debug register.
+ Thus, for counting the registers required to watch a
+ region, we simply need to increment the count on each
+ iteration. */
+ retval++;
+ }
+ else
+ {
+ unsigned len_rw = i386_length_and_rw_bits (size, type);
+
+ if (what == WP_INSERT)
+ status = i386_insert_aligned_watchpoint (state, addr, len_rw);
+ else if (what == WP_REMOVE)
+ status = i386_remove_aligned_watchpoint (state, addr, len_rw);
+ else
+ fatal ("\
+Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n",
+ (int) what);
+
+ /* We keep the loop going even after a failure, because some
+ of the other aligned watchpoints might still succeed
+ (e.g. if they watch addresses that are already watched,
+ in which case we just increment the reference counts of
+ occupied debug registers). If we break out of the loop
+ too early, we could cause those addresses watched by
+ other watchpoints to be disabled when breakpoint.c reacts
+ to our failure to insert this watchpoint and tries to
+ remove it. */
+ if (status)
+ retval = status;
+ }
+
+ addr += size;
+ len -= size;
+ }
+
+ return retval;
+}
+
+#define Z_PACKET_WRITE_WP '2'
+#define Z_PACKET_READ_WP '3'
+#define Z_PACKET_ACCESS_WP '4'
+
+/* Map the protocol watchpoint type TYPE to enum target_hw_bp_type. */
+
+static enum target_hw_bp_type
+Z_packet_to_hw_type (char type)
+{
+ switch (type)
+ {
+ case Z_PACKET_WRITE_WP:
+ return hw_write;
+ case Z_PACKET_READ_WP:
+ return hw_read;
+ case Z_PACKET_ACCESS_WP:
+ return hw_access;
+ default:
+ fatal ("Z_packet_to_hw_type: bad watchpoint type %c", type);
+ }
+}
+
+/* Insert a watchpoint to watch a memory region which starts at
+ address ADDR and whose length is LEN bytes. Watch memory accesses
+ of the type TYPE_FROM_PACKET. Return 0 on success, -1 on failure. */
+
+int
+i386_low_insert_watchpoint (struct i386_debug_reg_state *state,
+ char type_from_packet, CORE_ADDR addr, int len)
+{
+ int retval;
+ enum target_hw_bp_type type = Z_packet_to_hw_type (type_from_packet);
+
+ if (((len != 1 && len != 2 && len != 4)
+ && !(TARGET_HAS_DR_LEN_8 && len == 8))
+ || addr % len != 0)
+ {
+ retval = i386_handle_nonaligned_watchpoint (state, WP_INSERT,
+ addr, len, type);
+ }
+ else
+ {
+ unsigned len_rw = i386_length_and_rw_bits (len, type);
+
+ retval = i386_insert_aligned_watchpoint (state, addr, len_rw);
+ }
+
+ if (debug_hw_points)
+ i386_show_dr (state, "insert_watchpoint", addr, len, type);
+
+ return retval;
+}
+
+/* Remove a watchpoint that watched the memory region which starts at
+ address ADDR, whose length is LEN bytes, and for accesses of the
+ type TYPE_FROM_PACKET. Return 0 on success, -1 on failure. */
+
+int
+i386_low_remove_watchpoint (struct i386_debug_reg_state *state,
+ char type_from_packet, CORE_ADDR addr, int len)
+{
+ int retval;
+ enum target_hw_bp_type type = Z_packet_to_hw_type (type_from_packet);
+
+ if (((len != 1 && len != 2 && len != 4)
+ && !(TARGET_HAS_DR_LEN_8 && len == 8))
+ || addr % len != 0)
+ {
+ retval = i386_handle_nonaligned_watchpoint (state, WP_REMOVE,
+ addr, len, type);
+ }
+ else
+ {
+ unsigned len_rw = i386_length_and_rw_bits (len, type);
+
+ retval = i386_remove_aligned_watchpoint (state, addr, len_rw);
+ }
+
+ if (debug_hw_points)
+ i386_show_dr (state, "remove_watchpoint", addr, len, type);
+
+ return retval;
+}
+
+/* Return non-zero if we can watch a memory region that starts at
+ address ADDR and whose length is LEN bytes. */
+
+int
+i386_low_region_ok_for_watchpoint (struct i386_debug_reg_state *state,
+ CORE_ADDR addr, int len)
+{
+ int nregs;
+
+ /* Compute how many aligned watchpoints we would need to cover this
+ region. */
+ nregs = i386_handle_nonaligned_watchpoint (state, WP_COUNT,
+ addr, len, hw_write);
+ return nregs <= DR_NADDR ? 1 : 0;
+}
+
+/* If the inferior has some break/watchpoint that triggered, set the
+ address associated with that break/watchpoint and return true.
+ Otherwise, return false. */
+
+int
+i386_low_stopped_data_address (struct i386_debug_reg_state *state,
+ CORE_ADDR *addr_p)
+{
+ CORE_ADDR addr = 0;
+ int i;
+ int rc = 0;
+
+ /* Get dr_status_mirror for use by I386_DR_WATCH_HIT. */
+ i386_dr_low_get_status (state);
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (I386_DR_WATCH_HIT (state, i)
+ /* This second condition makes sure DRi is set up for a data
+ watchpoint, not a hardware breakpoint. The reason is
+ that GDB doesn't call the target_stopped_data_address
+ method except for data watchpoints. In other words, I'm
+ being paranoiac. */
+ && I386_DR_GET_RW_LEN (state, i) != 0)
+ {
+ addr = state->dr_mirror[i];
+ rc = 1;
+ if (debug_hw_points)
+ i386_show_dr (state, "watchpoint_hit", addr, -1, hw_write);
+ }
+ }
+
+ if (debug_hw_points && addr == 0)
+ i386_show_dr (state, "stopped_data_addr", 0, 0, hw_write);
+
+ if (rc)
+ *addr_p = addr;
+ return rc;
+}
+
+/* Return true if the inferior has some watchpoint that triggered.
+ Otherwise return false. */
+
+int
+i386_low_stopped_by_watchpoint (struct i386_debug_reg_state *state)
+{
+ CORE_ADDR addr = 0;
+ return i386_low_stopped_data_address (state, &addr);
+}
--- /dev/null
+/* Misc. low level support for i386.
+
+ Copyright (C) 2009
+ Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+/* Support for hardware watchpoints and breakpoints using the i386
+ debug registers.
+
+ This provides several functions for inserting and removing
+ hardware-assisted breakpoints and watchpoints, testing if one or
+ more of the watchpoints triggered and at what address, checking
+ whether a given region can be watched, etc.
+
+ The functions below implement debug registers sharing by reference
+ counts, and allow to watch regions up to 16 bytes long
+ (32 bytes on 64 bit hosts). */
+
+
+/* Debug registers' indices. */
+#define DR_FIRSTADDR 0
+#define DR_LASTADDR 3
+#define DR_NADDR 4 /* The number of debug address registers. */
+#define DR_STATUS 6
+#define DR_CONTROL 7
+
+/* Global state needed to track h/w watchpoints. */
+
+struct i386_debug_reg_state
+{
+ /* Mirror the inferior's DRi registers. We keep the status and
+ control registers separated because they don't hold addresses. */
+ CORE_ADDR dr_mirror[DR_NADDR];
+ unsigned dr_status_mirror, dr_control_mirror;
+
+ /* Reference counts for each debug register. */
+ int dr_ref_count[DR_NADDR];
+};
+
+/* Initialize STATE. */
+extern void i386_low_init_dregs (struct i386_debug_reg_state *state);
+
+/* Insert a watchpoint to watch a memory region which starts at
+ address ADDR and whose length is LEN bytes. Watch memory accesses
+ of the type TYPE_FROM_PACKET. Return 0 on success, -1 on failure. */
+extern int i386_low_insert_watchpoint (struct i386_debug_reg_state *state,
+ char type_from_packet, CORE_ADDR addr,
+ int len);
+
+/* Remove a watchpoint that watched the memory region which starts at
+ address ADDR, whose length is LEN bytes, and for accesses of the
+ type TYPE_FROM_PACKET. Return 0 on success, -1 on failure. */
+extern int i386_low_remove_watchpoint (struct i386_debug_reg_state *state,
+ char type_from_packet, CORE_ADDR addr,
+ int len);
+
+/* Return non-zero if we can watch a memory region that starts at
+ address ADDR and whose length is LEN bytes. */
+extern int i386_low_region_ok_for_watchpoint (struct i386_debug_reg_state *state,
+ CORE_ADDR addr, int len);
+
+/* If the inferior has some break/watchpoint that triggered, set the
+ address associated with that break/watchpoint and return true.
+ Otherwise, return false. */
+extern int i386_low_stopped_data_address (struct i386_debug_reg_state *state,
+ CORE_ADDR *addr_p);
+
+/* Return true if the inferior has some watchpoint that triggered.
+ Otherwise return false. */
+extern int i386_low_stopped_by_watchpoint (struct i386_debug_reg_state *state);
+\f
+/* Each target needs to provide several low-level functions
+ that will be called to insert watchpoints and hardware breakpoints
+ into the inferior, remove them, and check their status. These
+ functions are:
+
+ i386_dr_low_set_control -- set the debug control (DR7)
+ register to a given value
+
+ i386_dr_low_set_addr -- put an address into one debug register
+
+ i386_dr_low_get_status -- return the value of the debug
+ status (DR6) register.
+*/
+
+/* Update the inferior's debug register REGNUM from STATE. */
+extern void i386_dr_low_set_addr (const struct i386_debug_reg_state *state,
+ int regnum);
+
+/* Update the inferior's DR7 debug control register from STATE. */
+extern void i386_dr_low_set_control (const struct i386_debug_reg_state *state);
+
+/* Get the value of the inferior's DR6 debug status register
+ and record it in STATE. */
+extern void i386_dr_low_get_status (struct i386_debug_reg_state *state);
projects / thirdparty / binutils-gdb.git / commitdiff
