test/recipes/70-test_tls13kexmodes.t

   1 #! /usr/bin/env perl
   2 # Copyright 2017-2018 The OpenSSL Project Authors. All Rights Reserved.
   3 #
   4 # Licensed under the OpenSSL license (the "License").  You may not use
   5 # this file except in compliance with the License.  You can obtain a copy
   6 # in the file LICENSE in the source distribution or at
   7 # https://www.openssl.org/source/license.html
   8
   9 use strict;
  10 use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file srctop_dir bldtop_dir/;
  11 use OpenSSL::Test::Utils;
  12 use File::Temp qw(tempfile);
  13 use TLSProxy::Proxy;
  14 use checkhandshake qw(checkhandshake @handmessages @extensions);
  15
  16 my $test_name = "test_tls13kexmodes";
  17 setup($test_name);
  18
  19 plan skip_all => "TLSProxy isn't usable on $^O"
  20     if $^O =~ /^(VMS)$/;
  21
  22 plan skip_all => "$test_name needs the dynamic engine feature enabled"
  23     if disabled("engine") || disabled("dynamic-engine");
  24
  25 plan skip_all => "$test_name needs the sock feature enabled"
  26     if disabled("sock");
  27
  28 plan skip_all => "$test_name needs TLSv1.3 enabled"
  29     if disabled("tls1_3");
  30
  31 $ENV{OPENSSL_ia32cap} = '~0x200000200000000';
  32 $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
  33
  34
  35 @handmessages = (
  36     [TLSProxy::Message::MT_CLIENT_HELLO,
  37         checkhandshake::ALL_HANDSHAKES],
  38     [TLSProxy::Message::MT_SERVER_HELLO,
  39         checkhandshake::HRR_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE],
  40     [TLSProxy::Message::MT_CLIENT_HELLO,
  41         checkhandshake::HRR_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE],
  42     [TLSProxy::Message::MT_SERVER_HELLO,
  43         checkhandshake::ALL_HANDSHAKES],
  44     [TLSProxy::Message::MT_ENCRYPTED_EXTENSIONS,
  45         checkhandshake::ALL_HANDSHAKES],
  46     [TLSProxy::Message::MT_CERTIFICATE_REQUEST,
  47         checkhandshake::CLIENT_AUTH_HANDSHAKE],
  48     [TLSProxy::Message::MT_CERTIFICATE,
  49         checkhandshake::ALL_HANDSHAKES & ~(checkhandshake::RESUME_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE)],
  50     [TLSProxy::Message::MT_CERTIFICATE_VERIFY,
  51         checkhandshake::ALL_HANDSHAKES & ~(checkhandshake::RESUME_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE)],
  52     [TLSProxy::Message::MT_FINISHED,
  53         checkhandshake::ALL_HANDSHAKES],
  54     [TLSProxy::Message::MT_CERTIFICATE,
  55         checkhandshake::CLIENT_AUTH_HANDSHAKE],
  56     [TLSProxy::Message::MT_CERTIFICATE_VERIFY,
  57         checkhandshake::CLIENT_AUTH_HANDSHAKE],
  58     [TLSProxy::Message::MT_FINISHED,
  59         checkhandshake::ALL_HANDSHAKES],
  60     [0, 0]
  61 );
  62
  63 @extensions = (
  64     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SERVER_NAME,
  65         checkhandshake::SERVER_NAME_CLI_EXTENSION],
  66     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_STATUS_REQUEST,
  67         checkhandshake::STATUS_REQUEST_CLI_EXTENSION],
  68     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_GROUPS,
  69         checkhandshake::DEFAULT_EXTENSIONS],
  70     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EC_POINT_FORMATS,
  71         checkhandshake::DEFAULT_EXTENSIONS],
  72     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SIG_ALGS,
  73         checkhandshake::DEFAULT_EXTENSIONS],
  74     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ALPN,
  75         checkhandshake::ALPN_CLI_EXTENSION],
  76     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SCT,
  77         checkhandshake::SCT_CLI_EXTENSION],
  78     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ENCRYPT_THEN_MAC,
  79         checkhandshake::DEFAULT_EXTENSIONS],
  80     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EXTENDED_MASTER_SECRET,
  81         checkhandshake::DEFAULT_EXTENSIONS],
  82     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SESSION_TICKET,
  83         checkhandshake::DEFAULT_EXTENSIONS],
  84     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_KEY_SHARE,
  85         checkhandshake::DEFAULT_EXTENSIONS],
  86     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS,
  87         checkhandshake::DEFAULT_EXTENSIONS],
  88     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK_KEX_MODES,
  89         checkhandshake::PSK_KEX_MODES_EXTENSION],
  90     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK,
  91         checkhandshake::PSK_CLI_EXTENSION],
  92
  93     [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS,
  94         checkhandshake::DEFAULT_EXTENSIONS],
  95     [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_KEY_SHARE,
  96         checkhandshake::KEY_SHARE_HRR_EXTENSION],
  97
  98     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SERVER_NAME,
  99         checkhandshake::SERVER_NAME_CLI_EXTENSION],
 100     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_STATUS_REQUEST,
 101         checkhandshake::STATUS_REQUEST_CLI_EXTENSION],
 102     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_GROUPS,
 103         checkhandshake::DEFAULT_EXTENSIONS],
 104     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EC_POINT_FORMATS,
 105         checkhandshake::DEFAULT_EXTENSIONS],
 106     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SIG_ALGS,
 107         checkhandshake::DEFAULT_EXTENSIONS],
 108     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ALPN,
 109         checkhandshake::ALPN_CLI_EXTENSION],
 110     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SCT,
 111         checkhandshake::SCT_CLI_EXTENSION],
 112     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ENCRYPT_THEN_MAC,
 113         checkhandshake::DEFAULT_EXTENSIONS],
 114     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EXTENDED_MASTER_SECRET,
 115         checkhandshake::DEFAULT_EXTENSIONS],
 116     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SESSION_TICKET,
 117         checkhandshake::DEFAULT_EXTENSIONS],
 118     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_KEY_SHARE,
 119         checkhandshake::DEFAULT_EXTENSIONS],
 120     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS,
 121         checkhandshake::DEFAULT_EXTENSIONS],
 122     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK_KEX_MODES,
 123         checkhandshake::PSK_KEX_MODES_EXTENSION],
 124     [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK,
 125         checkhandshake::PSK_CLI_EXTENSION],
 126
 127     [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS,
 128         checkhandshake::DEFAULT_EXTENSIONS],
 129     [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_KEY_SHARE,
 130         checkhandshake::KEY_SHARE_SRV_EXTENSION],
 131     [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_PSK,
 132         checkhandshake::PSK_SRV_EXTENSION],
 133
 134     [TLSProxy::Message::MT_CERTIFICATE, TLSProxy::Message::EXT_STATUS_REQUEST,
 135         checkhandshake::STATUS_REQUEST_SRV_EXTENSION],
 136     [0,0,0]
 137 );
 138
 139 use constant {
 140     DELETE_EXTENSION => 0,
 141     EMPTY_EXTENSION => 1,
 142     NON_DHE_KEX_MODE_ONLY => 2,
 143     DHE_KEX_MODE_ONLY => 3,
 144     UNKNOWN_KEX_MODES => 4,
 145     BOTH_KEX_MODES => 5
 146 };
 147
 148 my $proxy = TLSProxy::Proxy->new(
 149     undef,
 150     cmdstr(app(["openssl"]), display => 1),
 151     srctop_file("apps", "server.pem"),
 152     (!$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE})
 153 );
 154
 155 #Test 1: First get a session
 156 (undef, my $session) = tempfile();
 157 $proxy->clientflags("-sess_out ".$session);
 158 $proxy->serverflags("-servername localhost");
 159 $proxy->sessionfile($session);
 160 $proxy->start() or plan skip_all => "Unable to start up Proxy for tests";
 161 plan tests => 11;
 162 ok(TLSProxy::Message->success(), "Initial connection");
 163
 164 #Test 2: Attempt a resume with no kex modes extension. Should not resume
 165 $proxy->clear();
 166 $proxy->clientflags("-sess_in ".$session);
 167 my $testtype = DELETE_EXTENSION;
 168 $proxy->filter(\&modify_kex_modes_filter);
 169 $proxy->start();
 170 checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
 171                checkhandshake::DEFAULT_EXTENSIONS
 172                | checkhandshake::KEY_SHARE_SRV_EXTENSION
 173                | checkhandshake::PSK_CLI_EXTENSION,
 174                "Resume with no kex modes");
 175
 176 #Test 3: Attempt a resume with empty kex modes extension. Should fail (empty
 177 #        extension is invalid)
 178 $proxy->clear();
 179 $proxy->clientflags("-sess_in ".$session);
 180 $testtype = EMPTY_EXTENSION;
 181 $proxy->start();
 182 ok(TLSProxy::Message->fail(), "Resume with empty kex modes");
 183
 184 #Test 4: Attempt a resume with non-dhe kex mode only. Should resume without a
 185 #        key_share
 186 $proxy->clear();
 187 $proxy->clientflags("-allow_no_dhe_kex -sess_in ".$session);
 188 $proxy->serverflags("-allow_no_dhe_kex");
 189 $testtype = NON_DHE_KEX_MODE_ONLY;
 190 $proxy->start();
 191 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE,
 192                checkhandshake::DEFAULT_EXTENSIONS
 193                | checkhandshake::PSK_KEX_MODES_EXTENSION
 194                | checkhandshake::PSK_CLI_EXTENSION
 195                | checkhandshake::PSK_SRV_EXTENSION,
 196                "Resume with non-dhe kex mode");
 197
 198 #Test 5: Attempt a resume with dhe kex mode only. Should resume with a key_share
 199 $proxy->clear();
 200 $proxy->clientflags("-sess_in ".$session);
 201 $testtype = DHE_KEX_MODE_ONLY;
 202 $proxy->start();
 203 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE,
 204                checkhandshake::DEFAULT_EXTENSIONS
 205                | checkhandshake::PSK_KEX_MODES_EXTENSION
 206                | checkhandshake::KEY_SHARE_SRV_EXTENSION
 207                | checkhandshake::PSK_CLI_EXTENSION
 208                | checkhandshake::PSK_SRV_EXTENSION,
 209                "Resume with non-dhe kex mode");
 210
 211 #Test 6: Attempt a resume with only unrecognised kex modes. Should not resume
 212 $proxy->clear();
 213 $proxy->clientflags("-sess_in ".$session);
 214 $testtype = UNKNOWN_KEX_MODES;
 215 $proxy->start();
 216 checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
 217                checkhandshake::DEFAULT_EXTENSIONS
 218                | checkhandshake::PSK_KEX_MODES_EXTENSION
 219                | checkhandshake::KEY_SHARE_SRV_EXTENSION
 220                | checkhandshake::PSK_CLI_EXTENSION,
 221                "Resume with empty kex modes");
 222
 223 #Test 7: Attempt a resume with both non-dhe and dhe kex mode. Should resume with
 224 #        a key_share
 225 $proxy->clear();
 226 $proxy->clientflags("-sess_in ".$session);
 227 $testtype = BOTH_KEX_MODES;
 228 $proxy->start();
 229 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE,
 230                checkhandshake::DEFAULT_EXTENSIONS
 231                | checkhandshake::PSK_KEX_MODES_EXTENSION
 232                | checkhandshake::KEY_SHARE_SRV_EXTENSION
 233                | checkhandshake::PSK_CLI_EXTENSION
 234                | checkhandshake::PSK_SRV_EXTENSION,
 235                "Resume with non-dhe kex mode");
 236
 237 #Test 8: Attempt a resume with both non-dhe and dhe kex mode, but unacceptable
 238 #        initial key_share. Should resume with a key_share following an HRR
 239 $proxy->clear();
 240 $proxy->clientflags("-sess_in ".$session);
 241 $proxy->serverflags("-curves P-256");
 242 $testtype = BOTH_KEX_MODES;
 243 $proxy->start();
 244 checkhandshake($proxy, checkhandshake::HRR_RESUME_HANDSHAKE,
 245                checkhandshake::DEFAULT_EXTENSIONS
 246                | checkhandshake::PSK_KEX_MODES_EXTENSION
 247                | checkhandshake::KEY_SHARE_SRV_EXTENSION
 248                | checkhandshake::KEY_SHARE_HRR_EXTENSION
 249                | checkhandshake::PSK_CLI_EXTENSION
 250                | checkhandshake::PSK_SRV_EXTENSION,
 251                "Resume with both kex modes and HRR");
 252
 253 #Test 9: Attempt a resume with dhe kex mode only and an unacceptable initial
 254 #        key_share. Should resume with a key_share following an HRR
 255 $proxy->clear();
 256 $proxy->clientflags("-sess_in ".$session);
 257 $proxy->serverflags("-curves P-256");
 258 $testtype = DHE_KEX_MODE_ONLY;
 259 $proxy->start();
 260 checkhandshake($proxy, checkhandshake::HRR_RESUME_HANDSHAKE,
 261                checkhandshake::DEFAULT_EXTENSIONS
 262                | checkhandshake::PSK_KEX_MODES_EXTENSION
 263                | checkhandshake::KEY_SHARE_SRV_EXTENSION
 264                | checkhandshake::KEY_SHARE_HRR_EXTENSION
 265                | checkhandshake::PSK_CLI_EXTENSION
 266                | checkhandshake::PSK_SRV_EXTENSION,
 267                "Resume with dhe kex mode and HRR");
 268
 269 #Test 10: Attempt a resume with both non-dhe and dhe kex mode, unacceptable
 270 #         initial key_share and no overlapping groups. Should resume without a
 271 #         key_share
 272 $proxy->clear();
 273 $proxy->clientflags("-allow_no_dhe_kex -curves P-384 -sess_in ".$session);
 274 $proxy->serverflags("-allow_no_dhe_kex -curves P-256");
 275 $testtype = BOTH_KEX_MODES;
 276 $proxy->start();
 277 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE,
 278                checkhandshake::DEFAULT_EXTENSIONS
 279                | checkhandshake::PSK_KEX_MODES_EXTENSION
 280                | checkhandshake::PSK_CLI_EXTENSION
 281                | checkhandshake::PSK_SRV_EXTENSION,
 282                "Resume with both kex modes, no overlapping groups");
 283
 284 #Test 11: Attempt a resume with dhe kex mode only, unacceptable
 285 #         initial key_share and no overlapping groups. Should fail
 286 $proxy->clear();
 287 $proxy->clientflags("-curves P-384 -sess_in ".$session);
 288 $proxy->serverflags("-curves P-256");
 289 $testtype = DHE_KEX_MODE_ONLY;
 290 $proxy->start();
 291 ok(TLSProxy::Message->fail(), "Resume with dhe kex mode, no overlapping groups");
 292
 293 unlink $session;
 294
 295 sub modify_kex_modes_filter
 296 {
 297     my $proxy = shift;
 298
 299     # We're only interested in the initial ClientHello
 300     return if ($proxy->flight != 0);
 301
 302     foreach my $message (@{$proxy->message_list}) {
 303         if ($message->mt == TLSProxy::Message::MT_CLIENT_HELLO) {
 304             my $ext;
 305
 306             if ($testtype == EMPTY_EXTENSION) {
 307                 $ext = pack "C",
 308                     0x00;       #List length
 309             } elsif ($testtype == NON_DHE_KEX_MODE_ONLY) {
 310                 $ext = pack "C2",
 311                     0x01,       #List length
 312                     0x00;       #psk_ke
 313             } elsif ($testtype == DHE_KEX_MODE_ONLY) {
 314                 $ext = pack "C2",
 315                     0x01,       #List length
 316                     0x01;       #psk_dhe_ke
 317             } elsif ($testtype == UNKNOWN_KEX_MODES) {
 318                 $ext = pack "C3",
 319                     0x02,       #List length
 320                     0xfe,       #unknown
 321                     0xff;       #unknown
 322             } elsif ($testtype == BOTH_KEX_MODES) {
 323                 #We deliberately list psk_ke first...should still use psk_dhe_ke
 324                 $ext = pack "C3",
 325                     0x02,       #List length
 326                     0x00,       #psk_ke
 327                     0x01;       #psk_dhe_ke
 328             }
 329
 330             if ($testtype == DELETE_EXTENSION) {
 331                 $message->delete_extension(
 332                     TLSProxy::Message::EXT_PSK_KEX_MODES);
 333             } else {
 334                 $message->set_extension(
 335                     TLSProxy::Message::EXT_PSK_KEX_MODES, $ext);
 336             }
 337
 338             $message->repack();
 339         }
 340     }
 341 }