]>
Commit | Line | Data |
---|---|---|
54194ba4 MT |
1 | |
2 | # LAN network interfaces IPs / networks | |
3 | # there can be multiple listening ips for SSDP traffic. | |
4 | # should be under the form nnn.nnn.nnn.nnn/nn | |
5 | # HTTP is available on all interfaces | |
6 | # port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect. | |
7 | port=0 | |
8 | ||
9 | # chain names for netfilter (not used for pf or ipf). | |
10 | upnp_forward_chain=UPNPFW | |
11 | upnp_nat_chain=UPNPFW | |
12 | ||
13 | # bitrates reported by daemon in bits per second | |
14 | bitrate_up=1000000 | |
15 | bitrate_down=10000000 | |
16 | ||
17 | # "secure" mode : when enabled, UPnP client are allowed to add mappings only | |
18 | # to their IP. | |
19 | secure_mode=yes | |
20 | ||
21 | # report system uptime instead of daemon uptime | |
22 | system_uptime=yes | |
23 | ||
24 | # notify interval in seconds. default is 30 seconds. | |
25 | notify_interval=60 | |
26 | ||
27 | # unused rules cleaning. | |
28 | # never remove any rule before this threshold for the number | |
29 | # of redirections is exceeded. default to 20 | |
30 | #clean_ruleset_threshold=10 | |
31 | # clean process work interval in seconds. default to 0 (disabled). | |
32 | # a 600 seconds (10 minutes) interval makes sense | |
33 | clean_ruleset_interval=600 | |
34 | ||
35 | # serial and model number the daemon will report to clients | |
36 | # in its XML description | |
37 | serial=12345678 | |
38 | model_number=1 | |
39 | ||
40 | # UPnP permission rules | |
41 | # (allow|deny) (external port range) ip/mask (internal port range) | |
42 | # A port range is <min port>-<max port> or <port> if there is only | |
43 | # one port in the range. | |
44 | # ip/mask format must be nn.nn.nn.nn/nn | |
45 | # it is advised to only allow redirection of port above 1024 | |
46 | # and to finish the rule set with "deny 0-65535 0.0.0.0/0 0-65535" | |
47 | allow 0-65535 0.0.0.0/0 0-65535 |