]> git.ipfire.org Git - thirdparty/gcc.git/blame - config-ml.in
Forgot this file on last check-in.
[thirdparty/gcc.git] / config-ml.in
CommitLineData
28e9041c 1# Configure fragment invoked in the post-target section for subdirs
2# wanting multilib support.
3#
4# It is advisable to support a few --enable/--disable options to let the
5# user select which libraries s/he really wants.
6#
7# Subdirectories wishing to use multilib should put the following lines
8# in the "post-target" section of configure.in.
9#
10# if [ "${srcdir}" = "." ] ; then
11# if [ "${with_target_subdir}" != "." ] ; then
12# . ${with_multisrctop}../../config-ml.in
13# else
14# . ${with_multisrctop}../config-ml.in
15# fi
16# else
17# . ${srcdir}/../config-ml.in
18# fi
19#
20# See librx/configure.in in the libg++ distribution for an example of how
21# to handle autoconf'd libraries.
22#
23# Things are complicated because 6 separate cases must be handled:
24# 2 (native, cross) x 3 (absolute-path, relative-not-dot, dot) = 6.
25#
26# srcdir=. is special. It must handle make programs that don't handle VPATH.
27# To implement this, a symlink tree is built for each library and for each
28# multilib subdir.
29#
30# The build tree is layed out as
31#
32# ./
33# libg++
34# newlib
35# m68020/
36# libg++
37# newlib
38# m68881/
39# libg++
40# newlib
41#
42# The nice feature about this arrangement is that inter-library references
43# in the build tree work without having to care where you are. Note that
44# inter-library references also work in the source tree because symlink trees
45# are built when srcdir=.
46#
47# Unfortunately, trying to access the libraries in the build tree requires
48# the user to manually choose which library to use as GCC won't be able to
49# find the right one. This is viewed as the lesser of two evils.
50#
51# Configure variables:
52# ${with_target_subdir} = "." for native, or ${target_alias} for cross.
53# Set by top level Makefile.
54# ${with_multisrctop} = how many levels of multilibs there are in the source
55# tree. It exists to handle the case of configuring in the source tree:
56# ${srcdir} is not constant.
57# ${with_multisubdir} = name of multilib subdirectory (eg: m68020/m68881).
58#
59# Makefile variables:
60# MULTISRCTOP = number of multilib levels in source tree (+1 if cross)
61# (FIXME: note that this is different than ${with_multisrctop}. Check out.).
62# MULTIBUILDTOP = number of multilib levels in build tree
63# MULTIDIRS = list of multilib subdirs (eg: m68000 m68020 ...)
64# (only defined in each library's main Makefile).
65# MULTISUBDIR = installed subdirectory name with leading '/' (eg: /m68000)
66# (only defined in each multilib subdir).
67
68# FIXME: Multilib is currently disabled by default for everything other than
69# newlib. It is up to each target to turn on multilib support for the other
70# libraries as desired.
71
72# We have to handle being invoked by both Cygnus configure and Autoconf.
73#
74# Cygnus configure incoming variables:
151ad919 75# srcdir, subdir, host, arguments
28e9041c 76#
77# Autoconf incoming variables:
151ad919 78# srcdir, host, ac_configure_args
28e9041c 79#
151ad919 80# We *could* figure srcdir and host out, but we'd have to do work that
28e9041c 81# our caller has already done to figure them out and requiring these two
82# seems reasonable.
151ad919 83# Note that `host' in this case is GCC's `target'. Target libraries are
84# configured for a particular host.
28e9041c 85
86if [ -n "${ac_configure_args}" ]; then
87 Makefile=${ac_file-Makefile}
88 ml_config_shell=${CONFIG_SHELL-/bin/sh}
89 ml_arguments="${ac_configure_args}"
90 ml_realsrcdir=${srcdir}
91else
92 Makefile=${Makefile-Makefile}
93 ml_config_shell=${config_shell-/bin/sh}
94 ml_arguments="${arguments}"
95 if [ -n "${subdir}" -a "${subdir}" != "." ] ; then
96 ml_realsrcdir=${srcdir}/${subdir}
97 else
98 ml_realsrcdir=${srcdir}
99 fi
100fi
101
102# Scan all the arguments and set all the ones we need.
103
26d9569a 104ml_verbose=--verbose
28e9041c 105for option in ${ml_arguments}
106do
107 case $option in
108 --*) ;;
109 -*) option=-$option ;;
110 esac
111
112 case $option in
113 --*=*)
114 optarg=`echo $option | sed -e 's/^[^=]*=//'`
115 ;;
116 esac
117
118 case $option in
119 --disable-*)
120 enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
121 eval $enableopt=no
122 ;;
123 --enable-*)
124 case "$option" in
125 *=*) ;;
126 *) optarg=yes ;;
127 esac
128 enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
129 eval $enableopt="$optarg"
130 ;;
131 --norecursion | --no*)
132 ml_norecursion=yes
133 ;;
26d9569a 134 --silent | --sil* | --quiet | --q*)
135 ml_verbose=--silent
136 ;;
28e9041c 137 --verbose | --v | --verb*)
138 ml_verbose=--verbose
139 ;;
140 --with-*)
141 case "$option" in
142 *=*) ;;
143 *) optarg=yes ;;
144 esac
145 withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
146 eval $withopt="$optarg"
147 ;;
148 --without-*)
149 withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
150 eval $withopt=no
151 ;;
152 esac
153done
154
155# Only do this if --enable-multilib.
156if [ "${enable_multilib}" = yes ]; then
157
158# Compute whether this is the library's top level directory
159# (ie: not a multilib subdirectory, and not a subdirectory like libg++/src).
160# ${with_multisubdir} tells us we're in the right branch, but we could be
161# in a subdir of that.
162# ??? The previous version could void this test by separating the process into
163# two files: one that only the library's toplevel configure.in ran (to
164# configure the multilib subdirs), and another that all configure.in's ran to
165# update the Makefile. It seemed reasonable to collapse all multilib support
166# into one file, but it does leave us with having to perform this test.
167ml_toplevel_p=no
168if [ -z "${with_multisubdir}" ]; then
169 if [ "${srcdir}" = "." ]; then
170 # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
171 # ${with_target_subdir} = "." for native, otherwise target alias.
172 if [ "${with_target_subdir}" = "." ]; then
173 if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
174 ml_toplevel_p=yes
175 fi
176 else
177 if [ -f ${ml_realsrcdir}/../../config-ml.in ]; then
178 ml_toplevel_p=yes
179 fi
180 fi
181 else
182 # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
183 if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
184 ml_toplevel_p=yes
185 fi
186 fi
187fi
188
189# If this is the library's top level directory, set multidirs to the
190# multilib subdirs to support. This lives at the top because we need
191# `multidirs' set right away.
192
193if [ "${ml_toplevel_p}" = yes ]; then
194
195multidirs=
196for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
197 dir=`echo $i | sed -e 's/;.*$//'`
198 if [ "${dir}" = "." ]; then
199 true
200 else
201 if [ -z "${multidirs}" ]; then
202 multidirs="${dir}"
203 else
204 multidirs="${multidirs} ${dir}"
205 fi
206 fi
207done
208
151ad919 209# Target libraries are configured for the host they run on, so we check
210# $host here, not $target.
211
212case "${host}" in
28e9041c 213arc-*-elf*)
214 if [ x$enable_biendian != xyes ]
215 then
216 old_multidirs=${multidirs}
217 multidirs=""
218 for x in ${old_multidirs}; do
219 case "${x}" in
220 *be*) : ;;
221 *) multidirs="${multidirs} ${x}" ;;
222 esac
223 done
224 fi
225 ;;
26186f46 226arm-*-*)
227 if [ x"$enable_fpu" = xno ]
228 then
229 old_multidirs=${multidirs}
230 multidirs=""
231 for x in ${old_multidirs}; do
232 case "${x}" in
233 *fpu*) : ;;
234 *) multidirs="${multidirs} ${x}" ;;
235 esac
236 done
237 fi
238 if [ x"$enable_26bit" = xno ]
239 then
240 old_multidirs=${multidirs}
241 multidirs=""
242 for x in ${old_multidirs}; do
243 case "${x}" in
244 *26bit*) : ;;
245 *) multidirs="${multidirs} ${x}" ;;
246 esac
247 done
248 fi
249 if [ x"$enable_underscore" = xno ]
250 then
251 old_multidirs=${multidirs}
252 multidirs=""
253 for x in ${old_multidirs}; do
254 case "${x}" in
255 *under*) : ;;
256 *) multidirs="${multidirs} ${x}" ;;
257 esac
258 done
259 fi
260 if [ x"$enable_interwork" = xno ]
261 then
262 old_multidirs=${multidirs}
263 multidirs=""
264 for x in ${old_multidirs}; do
265 case "${x}" in
266 *interwork*) : ;;
267 *) multidirs="${multidirs} ${x}" ;;
268 esac
269 done
270 fi
271 if [ x$enable_biendian = xno ]
272 then
273 old_multidirs="${multidirs}"
274 multidirs=""
275 for x in ${old_multidirs}; do
276 case "$x" in
277 *le* ) : ;;
278 *be* ) : ;;
279 *) multidirs="${multidirs} ${x}" ;;
280 esac
281 done
282 fi
283 if [ x"$enable_nofmult" = xno ]
284 then
285 old_multidirs="${multidirs}"
286 multidirs=""
287 for x in ${old_multidirs}; do
288 case "$x" in
289 *nofmult* ) : ;;
290 *) multidirs="${multidirs} ${x}" ;;
291 esac
292 done
293 fi
294 ;;
28e9041c 295m68*-*-*)
296 if [ x$enable_softfloat = xno ]
297 then
298 old_multidirs="${multidirs}"
299 multidirs=""
300 for x in ${old_multidirs}; do
301 case "$x" in
302 *soft-float* ) : ;;
303 *) multidirs="${multidirs} ${x}" ;;
304 esac
305 done
306 fi
307 if [ x$enable_m68881 = xno ]
308 then
309 old_multidirs="${multidirs}"
310 multidirs=""
311 for x in ${old_multidirs}; do
312 case "$x" in
313 *m68881* ) : ;;
314 *) multidirs="${multidirs} ${x}" ;;
315 esac
316 done
317 fi
318 if [ x$enable_m68000 = xno ]
319 then
320 old_multidirs="${multidirs}"
321 multidirs=""
322 for x in ${old_multidirs}; do
323 case "$x" in
324 *m68000* ) : ;;
325 *) multidirs="${multidirs} ${x}" ;;
326 esac
327 done
328 fi
329 if [ x$enable_m68020 = xno ]
330 then
331 old_multidirs="${multidirs}"
332 multidirs=""
333 for x in ${old_multidirs}; do
334 case "$x" in
335 *m68020* ) : ;;
336 *) multidirs="${multidirs} ${x}" ;;
337 esac
338 done
339 fi
340 ;;
341mips*-*-*)
342 if [ x$enable_single_float = xno ]
343 then
344 old_multidirs="${multidirs}"
345 multidirs=""
346 for x in ${old_multidirs}; do
347 case "$x" in
348 *single* ) : ;;
349 *) multidirs="${multidirs} ${x}" ;;
350 esac
351 done
352 fi
353 if [ x$enable_biendian = xno ]
354 then
355 old_multidirs="${multidirs}"
356 multidirs=""
357 for x in ${old_multidirs}; do
358 case "$x" in
359 *el* ) : ;;
360 *eb* ) : ;;
361 *) multidirs="${multidirs} ${x}" ;;
362 esac
363 done
364 fi
365 if [ x$enable_softfloat = xno ]
366 then
367 old_multidirs="${multidirs}"
368 multidirs=""
369 for x in ${old_multidirs}; do
370 case "$x" in
371 *soft-float* ) : ;;
372 *) multidirs="${multidirs} ${x}" ;;
373 esac
374 done
375 fi
a48ef8ee 376 case " $multidirs " in
377 *" mabi=64 "*)
378 # We will not be able to create libraries with -mabi=64 if
379 # we cannot even link a trivial program. It usually
380 # indicates the 64bit libraries are missing.
381 if echo 'main() {}' > conftest.c &&
382 ${CC-gcc} -mabi=64 conftest.c -o conftest; then
383 :
384 else
385 echo Could not link program with -mabi=64, disabling it.
386 old_multidirs="${multidirs}"
387 multidirs=""
388 for x in ${old_multidirs}; do
389 case "$x" in
390 *mabi=64* ) : ;;
391 *) multidirs="${multidirs} ${x}" ;;
392 esac
393 done
394 fi
395 rm -f conftest.c conftest
396 ;;
397 esac
28e9041c 398 ;;
399powerpc*-*-* | rs6000*-*-*)
400 if [ x$enable_softfloat = xno ]
401 then
402 old_multidirs="${multidirs}"
403 multidirs=""
404 for x in ${old_multidirs}; do
405 case "$x" in
406 *soft-float* ) : ;;
407 *) multidirs="${multidirs} ${x}" ;;
408 esac
409 done
410 fi
411 if [ x$enable_powercpu = xno ]
412 then
413 old_multidirs="${multidirs}"
414 multidirs=""
415 for x in ${old_multidirs}; do
416 case "$x" in
417 power | */power | */power/* ) : ;;
418 *) multidirs="${multidirs} ${x}" ;;
419 esac
420 done
421 fi
422 if [ x$enable_powerpccpu = xno ]
423 then
424 old_multidirs="${multidirs}"
425 multidirs=""
426 for x in ${old_multidirs}; do
427 case "$x" in
428 *powerpc* ) : ;;
429 *) multidirs="${multidirs} ${x}" ;;
430 esac
431 done
432 fi
433 if [ x$enable_powerpcos = xno ]
434 then
435 old_multidirs="${multidirs}"
436 multidirs=""
437 for x in ${old_multidirs}; do
438 case "$x" in
439 *mcall-linux* | *mcall-solaris* ) : ;;
440 *) multidirs="${multidirs} ${x}" ;;
441 esac
442 done
443 fi
444 if [ x$enable_biendian = xno ]
445 then
446 old_multidirs="${multidirs}"
447 multidirs=""
448 for x in ${old_multidirs}; do
449 case "$x" in
450 *mlittle* | *mbig* ) : ;;
451 *) multidirs="${multidirs} ${x}" ;;
452 esac
453 done
454 fi
455 if [ x$enable_sysv = xno ]
456 then
457 old_multidirs="${multidirs}"
458 multidirs=""
459 for x in ${old_multidirs}; do
460 case "$x" in
461 *mcall-sysv* ) : ;;
462 *) multidirs="${multidirs} ${x}" ;;
463 esac
464 done
465 fi
466 if [ x$enable_aix = xno ]
467 then
468 old_multidirs="${multidirs}"
469 multidirs=""
470 for x in ${old_multidirs}; do
471 case "$x" in
472 *mcall-aix* ) : ;;
473 *) multidirs="${multidirs} ${x}" ;;
474 esac
475 done
476 fi
477 ;;
5514758e 478sparc*-*-*)
479 case " $multidirs " in
480 *" m64 "*)
481 # We will not be able to create libraries with -m64 if
482 # we cannot even link a trivial program. It usually
483 # indicates the 64bit libraries are missing.
484 if echo 'main() {}' > conftest.c &&
485 ${CC-gcc} -m64 conftest.c -o conftest; then
486 :
487 else
488 echo Could not link program with -m64, disabling it.
489 old_multidirs="${multidirs}"
490 multidirs=""
491 for x in ${old_multidirs}; do
492 case "$x" in
493 *m64* ) : ;;
494 *) multidirs="${multidirs} ${x}" ;;
495 esac
496 done
497 fi
498 rm -f conftest.c conftest
499 ;;
500 esac
501 ;;
28e9041c 502esac
503
504# Remove extraneous blanks from multidirs.
505# Tests like `if [ -n "$multidirs" ]' require it.
506multidirs=`echo "$multidirs" | sed -e 's/^[ ][ ]*//' -e 's/[ ][ ]*$//' -e 's/[ ][ ]*/ /g'`
507
508# Add code to library's top level makefile to handle building the multilib
509# subdirs.
510
511cat > Multi.tem <<\EOF
512
513# FIXME: There should be an @-sign in front of the `if'.
514# Leave out until this is tested a bit more.
515multi-do:
516 if [ -z "$(MULTIDIRS)" ]; then \
517 true; \
518 else \
519 rootpre=`pwd`/; export rootpre; \
520 srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
521 lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
522 compiler="$(CC)"; \
523 for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
524 dir=`echo $$i | sed -e 's/;.*$$//'`; \
525 if [ "$${dir}" = "." ]; then \
526 true; \
527 else \
528 if [ -d ../$${dir}/$${lib} ]; then \
529 flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
530 if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
531 CFLAGS="$(CFLAGS) $${flags}" \
151ad919 532 prefix="$(prefix)" \
533 exec_prefix="$(exec_prefix)" \
28e9041c 534 CXXFLAGS="$(CXXFLAGS) $${flags}" \
535 LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
536 LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
c0a2f1ac 537 LDFLAGS="$(LDFLAGS) $${flags}" \
28e9041c 538 $(DO)); then \
539 true; \
540 else \
541 exit 1; \
542 fi; \
543 else true; \
544 fi; \
545 fi; \
546 done; \
547 fi
548
549# FIXME: There should be an @-sign in front of the `if'.
550# Leave out until this is tested a bit more.
551multi-clean:
552 if [ -z "$(MULTIDIRS)" ]; then \
553 true; \
554 else \
555 lib=`pwd | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
556 for dir in Makefile $(MULTIDIRS); do \
557 if [ -f ../$${dir}/$${lib}/Makefile ]; then \
558 if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
559 then true; \
560 else exit 1; \
561 fi; \
562 else true; \
563 fi; \
564 done; \
565 fi
566EOF
567
568cat ${Makefile} Multi.tem > Makefile.tem
569rm -f ${Makefile} Multi.tem
570mv Makefile.tem ${Makefile}
571
572fi # ${ml_toplevel_p} = yes
573
574if [ "${ml_verbose}" = --verbose ]; then
575 echo "Adding multilib support to Makefile in ${ml_realsrcdir}"
576 if [ "${ml_toplevel_p}" = yes ]; then
577 echo "multidirs=${multidirs}"
578 fi
579 echo "with_multisubdir=${with_multisubdir}"
580fi
581
582if [ "${srcdir}" = "." ]; then
583 if [ "${with_target_subdir}" != "." ]; then
584 ml_srcdotdot="../"
585 else
586 ml_srcdotdot=""
587 fi
588else
589 ml_srcdotdot=""
590fi
591
592if [ -z "${with_multisubdir}" ]; then
593 ml_subdir=
594 ml_builddotdot=
595 : # ml_srcdotdot= # already set
596else
597 ml_subdir="/${with_multisubdir}"
598 # The '[^/][^/]*' appears that way to work around a SunOS sed bug.
599 ml_builddotdot=`echo ${with_multisubdir} | sed -e 's:[^/][^/]*:..:g'`/
600 if [ "$srcdir" = "." ]; then
601 ml_srcdotdot=${ml_srcdotdot}${ml_builddotdot}
602 else
603 : # ml_srcdotdot= # already set
604 fi
605fi
606
607if [ "${ml_toplevel_p}" = yes ]; then
608 ml_do='$(MAKE)'
609 ml_clean='$(MAKE)'
610else
611 ml_do=true
612 ml_clean=true
613fi
614
615# TOP is used by newlib and should not be used elsewhere for this purpose.
616# MULTI{SRC,BUILD}TOP are the proper ones to use. MULTISRCTOP is empty
617# when srcdir != builddir. MULTIBUILDTOP is always some number of ../'s.
618# FIXME: newlib needs to be updated to use MULTI{SRC,BUILD}TOP so we can
619# delete TOP. Newlib may wish to continue to use TOP for its own purposes
620# of course.
621# MULTIDIRS is non-empty for the cpu top level Makefile (eg: newlib/Makefile)
622# and lists the subdirectories to recurse into.
623# MULTISUBDIR is non-empty in each cpu subdirectory's Makefile
624# (eg: newlib/h8300h/Makefile) and is the installed subdirectory name with
625# a leading '/'.
626# MULTIDO is used for targets like all, install, and check where
627# $(FLAGS_TO_PASS) augmented with the subdir's compiler option is needed.
628# MULTICLEAN is used for the *clean targets.
629#
630# ??? It is possible to merge MULTIDO and MULTICLEAN into one. They are
631# currently kept separate because we don't want the *clean targets to require
632# the existence of the compiler (which MULTIDO currently requires) and
633# therefore we'd have to record the directory options as well as names
634# (currently we just record the names and use --print-multi-lib to get the
635# options).
636
637sed -e "s:^TOP[ ]*=[ ]*\([./]*\)[ ]*$:TOP = ${ml_builddotdot}\1:" \
638 -e "s:^MULTISRCTOP[ ]*=.*$:MULTISRCTOP = ${ml_srcdotdot}:" \
639 -e "s:^MULTIBUILDTOP[ ]*=.*$:MULTIBUILDTOP = ${ml_builddotdot}:" \
640 -e "s:^MULTIDIRS[ ]*=.*$:MULTIDIRS = ${multidirs}:" \
641 -e "s:^MULTISUBDIR[ ]*=.*$:MULTISUBDIR = ${ml_subdir}:" \
642 -e "s:^MULTIDO[ ]*=.*$:MULTIDO = $ml_do:" \
643 -e "s:^MULTICLEAN[ ]*=.*$:MULTICLEAN = $ml_clean:" \
644 ${Makefile} > Makefile.tem
645rm -f ${Makefile}
646mv Makefile.tem ${Makefile}
647
648# If this is the library's top level, configure each multilib subdir.
649# This is done at the end because this is the loop that runs configure
650# in each multilib subdir and it seemed reasonable to finish updating the
651# Makefile before going on to configure the subdirs.
652
653if [ "${ml_toplevel_p}" = yes ]; then
654
655# We must freshly configure each subdirectory. This bit of code is
656# actually partially stolen from the main configure script. FIXME.
657
658if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
659
660 if [ "${ml_verbose}" = --verbose ]; then
661 echo "Running configure in multilib subdirs ${multidirs}"
662 echo "pwd: `pwd`"
663 fi
664
665 ml_origdir=`pwd`
666 ml_libdir=`echo $ml_origdir | sed -e 's,^.*/,,'`
667 # cd to top-level-build-dir/${with_target_subdir}
668 cd ..
669
670 for ml_dir in ${multidirs}; do
671
672 if [ "${ml_verbose}" = --verbose ]; then
673 echo "Running configure in multilib subdir ${ml_dir}"
674 echo "pwd: `pwd`"
675 fi
676
151ad919 677 if [ -d ${ml_dir} ]; then true; else
678 # ``mkdir -p ${ml_dir}'' See also mkinstalldirs.
679 pathcomp=""
680 for d in `echo ":${ml_dir}" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`; do
681 pathcomp="$pathcomp$d"
682 case "$pathcomp" in
683 -* ) pathcomp=./$pathcomp ;;
684 esac
685 if test ! -d "$pathcomp"; then
686 echo "mkdir $pathcomp" 1>&2
687 mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
688 fi
689 if test ! -d "$pathcomp"; then
690 exit $lasterr
691 fi
692 pathcomp="$pathcomp/"
693 done
694 fi
28e9041c 695 if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi
696
697 # Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../
698 dotdot=../`echo ${ml_dir} | sed -e 's|[^/]||g' -e 's|/|../|g'`
699
700 case ${srcdir} in
701 ".")
702 echo Building symlink tree in `pwd`/${ml_dir}/${ml_libdir}
703 if [ "${with_target_subdir}" != "." ]; then
704 ml_unsubdir="../"
705 else
706 ml_unsubdir=""
707 fi
708 (cd ${ml_dir}/${ml_libdir};
709 ../${dotdot}${ml_unsubdir}symlink-tree ../${dotdot}${ml_unsubdir}${ml_libdir} "")
1f7295a5 710 if [ -f ${ml_dir}/${ml_libdir}/Makefile ]; then
711 if [ x"${MAKE}" = x ]; then
712 (cd ${ml_dir}/${ml_libdir}; make distclean)
713 else
714 (cd ${ml_dir}/${ml_libdir}; ${MAKE} distclean)
715 fi
716 fi
28e9041c 717 ml_newsrcdir="."
718 ml_srcdiroption=
719 multisrctop=${dotdot}
720 ;;
721 *)
722 case "${srcdir}" in
2adfe2a9 723 /* | [A-Za-z]:[\\/]* ) # absolute path
28e9041c 724 ml_newsrcdir=${srcdir}
725 ;;
726 *) # otherwise relative
727 ml_newsrcdir=${dotdot}${srcdir}
728 ;;
729 esac
730 ml_srcdiroption="-srcdir=${ml_newsrcdir}"
731 multisrctop=
732 ;;
733 esac
734
735 case "${progname}" in
2adfe2a9 736 /* | [A-Za-z]:[\\/]* ) ml_recprog=${progname} ;;
28e9041c 737 *) ml_recprog=${dotdot}${progname} ;;
738 esac
739
740 # FIXME: POPDIR=${PWD=`pwd`} doesn't work here.
741 ML_POPDIR=`pwd`
742 cd ${ml_dir}/${ml_libdir}
743
744 if [ -f ${ml_newsrcdir}/configure ]; then
bae203e7 745 ml_recprog="${ml_newsrcdir}/configure --cache-file=../config.cache"
28e9041c 746 fi
49c01ead 747
748 # find compiler flag corresponding to ${ml_dir}
749 for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
750 dir=`echo $i | sed -e 's/;.*$//'`
751 if [ "${dir}" = "${ml_dir}" ]; then
752 flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`
753 break
754 fi
755 done
883e4a54 756 ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags"'
454c751b 757
758 if [ "${with_target_subdir}" = "." ]; then
883e4a54 759 CC_=$CC' '
760 CXX_=$CXX' '
454c751b 761 else
762 # Create a regular expression that matches any string as long
763 # as ML_POPDIR.
764 popdir_rx=`echo ${ML_POPDIR} | sed 's,.,.,g'`
765 CC_=
766 for arg in ${CC}; do
767 case $arg in
768 -[BIL]"${ML_POPDIR}"/*)
287d2cfb 769 CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\1/p"`' ' ;;
454c751b 770 "${ML_POPDIR}"/*)
2968054b 771 CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
454c751b 772 *)
287d2cfb 773 CC_="${CC_}${arg} " ;;
454c751b 774 esac
775 done
776
777 CXX_=
778 for arg in ${CXX}; do
779 case $arg in
780 -[BIL]"${ML_POPDIR}"/*)
287d2cfb 781 CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
454c751b 782 "${ML_POPDIR}"/*)
287d2cfb 783 CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
454c751b 784 *)
287d2cfb 785 CXX_="${CXX_}${arg} " ;;
454c751b 786 esac
787 done
788
883e4a54 789 if test "x${LD_LIBRARY_PATH+set}" = xset; then
790 LD_LIBRARY_PATH_=
791 for arg in `echo "$LD_LIBRARY_PATH" | tr ':' ' '`; do
792 case "$arg" in
793 "${ML_POPDIR}"/*)
794 arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
795 ;;
796 esac
797 if test "x$LD_LIBRARY_PATH_" != x; then
798 LD_LIBRARY_PATH_=$LD_LIBRARY_PATH_:$arg
799 else
800 LD_LIBRARY_PATH_=$arg
801 fi
802 done
803 ml_config_env="$ml_config_env LD_LIBRARY_PATH=$LD_LIBRARY_PATH_"
804 fi
805
806 if test "x${SHLIB_PATH+set}" = xset; then
807 SHLIB_PATH_=
808 for arg in `echo "$SHLIB_PATH" | tr ':' ' '`; do
809 case "$arg" in
810 "${ML_POPDIR}"/*)
811 arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
812 ;;
813 esac
814 if test "x$SHLIB_PATH_" != x; then
815 SHLIB_PATH_=$SHLIB_PATH_:$arg
816 else
817 SHLIB_PATH_=$arg
818 fi
819 done
820 ml_config_env="$ml_config_env SHLIB_PATH=$SHLIB_PATH_"
821 fi
454c751b 822 fi
49c01ead 823
824 if eval ${ml_config_env} ${ml_config_shell} ${ml_recprog} \
28e9041c 825 --with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \
826 ${ml_arguments} ${ml_srcdiroption} ; then
827 true
828 else
829 exit 1
830 fi
831
832 cd ${ML_POPDIR}
833
834 done
835
836 cd ${ml_origdir}
837fi
838
839fi # ${ml_toplevel_p} = yes
840fi # ${enable_multilib} = yes